Under "heavy" RX load, the driver cannot handle the descriptors fast
enough. In detail, when a descriptor is consumed, its used flag is
cleared and once the RX budget is consumed all descriptors with a
cleared used flag are prepared to receive more data. Under load though,
the HW may constantly receive more data and use those descriptors with a
cleared used flag before they are actually prepared for next usage.
The head and tail pointers into the RX-ring should always be valid and
we can omit clearing and checking of the used flag.
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Coverage data suggests that the unlikely case of receiving data while
the receive handler is running may not be that unlikely.
Coverage data after running iperf for a while:
91320: 891: work_done = bp->macbgem_ops.mog_rx(bp, budget);
91320: 892: if (work_done < budget) {
2362: 893: napi_complete(napi);
-: 894:
-: 895: /* Packets received while interrupts were disabled */
4724: 896: status = macb_readl(bp, RSR);
2362: 897: if (unlikely(status)) {
762: 898: if (bp->caps & MACB_CAPS_ISR_CLEAR_ON_WRITE)
762: 899: macb_writel(bp, ISR, MACB_BIT(RCOMP));
-: 900: napi_reschedule(napi);
-: 901: } else {
1600: 902: macb_writel(bp, IER, MACB_RX_INT_FLAGS);
-: 903: }
-: 904: }
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When data is received during the driver processing received data the
NAPI is re-scheduled. In that case the RX interrupt should not be
re-enabled.
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A few interrupt flags were not cleared in the ISR, resulting in a sytem
trapped in the ISR in cases one of those interrupts occurred. Clear all
flags to avoid such situations.
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Just as commit "net: macb: DMA-unmap full rx-buffer"
(48330e08fa), pass the size that
was used for mapping the memory also to the unmap routine to
avoid warnings from the DMA_API.
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In ip_tunnel_rcv(), set skb->network_header to inner IP header
before IP_ECN_decapsulate().
Without the fix, IP_ECN_decapsulate() takes outer IP header as
inner IP header, possibly causing error messages or packet drops.
Note that this skb_reset_network_header() call was in this spot when
the original feature for checking consistency of ECN bits through
tunnels was added in eccc1bb8d4 ("tunnel: drop packet if ECN present
with not-ECT"). It was only removed from this spot in 3d7b46cd20
("ip_tunnel: push generic protocol handling to ip_tunnel module.").
Fixes: 3d7b46cd20 ("ip_tunnel: push generic protocol handling to ip_tunnel module.")
Reported-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Ying Cai <ycai@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jeff Kirsher says:
====================
Intel Wired LAN Driver Updates
This series contains updates to e1000e only.
David provides four fixes for e1000e, first is a workaround for a hardware
erratum on 82579 devices which experienced packet loss in gigabit and 100
speeds when interconnect between the PHY and MAC is exiting K1 power saving
state. Second expands the scope of a workaround to include i217 and i218
parts as well to address over aggressive transmit behavior when connecting
at 10Mbs half-duplex. Next is to resolve a reported link flap issue on
82579 parts which was root caused as an interoperability problem between
82579 and at least some Broadcom PHYs in the Energy Efficient Ethernet wake
mechanism. Lastly, restricts the workaround of putting the PHY into MDIO
slow mode to access the PHY id to relevant parts since this issue has been
fixed on the newer hardware.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
It has been determined that the workaround of putting the PHY into MDIO
slow mode to access the PHY id is not necessary with Lynx Point and newer
parts. The issue that necessitated the workaround has been fixed on the
newer hardware.
We will maintains, as a last ditch attempt, the conversion to MDIO Slow
Mode in the failure branch when attempting to access the PHY id so as to
cover all contingencies.
Signed-off-by: Dave Ertman <davidx.m.ertman@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Several customers have reported a link flap issue on 82579. The symptoms
are random and intermittent link losses when 82579 is connected to specific
link partners. Issue has been root caused as interoperability problem
between 82579 and at least some Broadcom PHYs in the Energy Efficient
Ethernet wake mechanism.
To fix the issue, we are disabling the Phase Locked Loop shutdown in 100M
Low Power Idle. This solution will cause an increase of power in 100M EEE
link. It will cost additional 28mW in this specific mode.
Cc: Lukasz Adamczuk <lukasz.adamczuk@intel.com>
Signed-off-by: Dave Ertman <davidx.m.ertman@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
In commit 772d05c51c "e1000e: slow performance
between two 82579 connected via 10Mbit hub", a workaround was put into place
to address the overaggressive transmit behavior of 82579 parts when connecting
at 10Mbs half-duplex.
This same behavior is seen on i217 and i218 parts as well. This patch expands
the original workaround to encompass these parts.
Signed-off-by: Dave Ertman <davidx.m.ertman@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
This is a workaround for a HW erratum on 82579 devices.
Erratum is #23 in Intel 6 Series Chipset and Intel C200 Series Chipset
specification Update June 2013.
Problem: 82579 parts experience packet loss in Gig and 100 speeds
when interconnect between PHY and MAC is exiting K1 power saving state.
This was previously believed to only affect 1Gig speed, but has been observed
at 100Mbs also.
Workaround: Disable K1 for 82579 devices at Gig and 100 speeds.
Signed-off-by: Dave Ertman <davidx.m.ertman@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Or Gerlitz says:
====================
This series contains fixes for 3.15-rc, mostly around SRIOV. The patches by Jack,
Matan and myself fix few issues related to mlx4 SRIOV support for RoCE and single
port VFs, and the patch from Eyal eliminates checking PCI caps for VFs which is misleading.
Patches done against the net tree, commit 014f1b2 "net: bonding: Fix format string
mismatch in bond_sysfs.c"
We'd be happy to get Eyal's patch queued in your -stable list for 3.14.y
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Carrying out PCI speed/width checks through pcie_get_minimum_link()
on VFs yield wrong results, so remove them.
Fixes: b912b2f ('net/mlx4_core: Warn if device doesn't have enough PCI bandwidth')
Signed-off-by: Eyal Perry <eyalpe@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When running in SRIOV mode, VM that is assigned with a non-provisioned
Ethernet VFs get themselves a random mac when the Eth driver starts. In
this case, if the IB driver startup code that deals with RoCE runs first,
it will use a zero mac as the source mac for the Para-Virtual CM MADs
which is buggy. To handle that, we change the order of loading.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The code that deals with computing the slave id based on a given GID
gave wrong results when the number of single port VFs wasn't the
same for port 1 vs. port 2 and the relevant VF is single ported on
port 2. As a result, incoming CM MADs were dispatched to the wrong VF.
Fixed that and added documentation to clarify the computation steps.
Fixes: 449fc48 ('net/mlx4: Adapt code for N-Port VF')
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When using single ported VFs and the VF is using port 2, we need
to adjust the port accordingly (change it from 1 to 2).
Fixes: 449fc48 ('net/mlx4: Adapt code for N-Port VF')
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Jack Morgenstein <jackm@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes the following dereference check ordering.
sound/soc/intel/sst-haswell-pcm.c:749 hsw_pcm_probe() warn: variable dereferenced before check 'pdata' (see line 746)
git remote add asoc git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
git remote update asoc
git checkout 0b708c87f6
vim +/pdata +749 sound/soc/intel/sst-haswell-pcm.c
a4b12990 Mark Brown 2014-03-12 740 };
a4b12990 Mark Brown 2014-03-12 741
a4b12990 Mark Brown 2014-03-12 742 static int hsw_pcm_probe(struct snd_soc_platform *platform)
a4b12990 Mark Brown 2014-03-12 743 {
a4b12990 Mark Brown 2014-03-12 744 struct sst_pdata *pdata = dev_get_platdata(platform->dev);
a4b12990 Mark Brown 2014-03-12 745 struct hsw_priv_data *priv_data;
0b708c87 Liam Girdwood 2014-05-02 @746 struct device *dma_dev = pdata->dma_dev;
0b708c87 Liam Girdwood 2014-05-02 747 int i, ret = 0;
a4b12990 Mark Brown 2014-03-12 748
a4b12990 Mark Brown 2014-03-12 @749 if (!pdata)
a4b12990 Mark Brown 2014-03-12 750 return -ENODEV;
a4b12990 Mark Brown 2014-03-12 751
a4b12990 Mark Brown 2014-03-12 752 priv_data = devm_kzalloc(platform->dev, sizeof(*priv_data), GFP_KERNEL);
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
The hw_version 3 Elantech touchpad on the Gigabyte U2442 does not accept
0x0b as initialization value for r10, this stand-alone version of the
driver: http://planet76.com/drivers/elantech/psmouse-elantech-v6.tar.bz2
Uses 0x03 which does work, so this means not setting bit 3 of r10 which
sets: "Enable Real H/W Resolution In Absolute mode"
Which will result in half the x and y resolution we get with that bit set,
so simply not setting it everywhere is not a solution. We've been unable to
find a way to identify touchpads where setting the bit will fail, so this
patch uses a dmi based blacklist for this.
https://bugzilla.kernel.org/show_bug.cgi?id=61151
Cc: stable@vger.kernel.org
Reported-by: Philipp Wolfer <ph.wolfer@gmail.com>
Tested-by: Philipp Wolfer <ph.wolfer@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Commit 4d619f625a ("net: cdc_ncm: no point in filling up the NTBs
if we send ZLPs") changed the padding logic for devices with the ZLP
flag set. This meant that frames of any size will be sent without
additional padding, except for the single byte added if the size is
a multiple of the USB packet size. But if the unpadded size is
identical to the maximum frame size, and the maximum size is a
multiplum of the USB packet size, then this one-byte padding will
overflow the buffer.
Prevent padding if already at maximum frame size, letting usbnet
transmit a ZLP instead in this case.
Fixes: 4d619f625a ("net: cdc_ncm: no point in filling up the NTBs if we send ZLPs")
Reported by: Yu-an Shih <yshih@nvidia.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
If NO_DMA=y:
drivers/built-in.o: In function `altera_tse_probe':
altera_tse_main.c:(.text+0x25ec2e): undefined reference to `dma_set_mask'
altera_tse_main.c:(.text+0x25ec78): undefined reference to `dma_supported'
altera_tse_main.c:(.text+0x25ecb6): undefined reference to `dma_supported'
drivers/built-in.o: In function `sgdma_async_read':
altera_sgdma.c:(.text+0x25f620): undefined reference to `dma_sync_single_for_cpu'
drivers/built-in.o: In function `sgdma_uninitialize':
(.text+0x25f678): undefined reference to `dma_unmap_single'
drivers/built-in.o: In function `sgdma_uninitialize':
(.text+0x25f696): undefined reference to `dma_unmap_single'
drivers/built-in.o: In function `sgdma_initialize':
(.text+0x25f6f0): undefined reference to `dma_map_single'
drivers/built-in.o: In function `sgdma_initialize':
(.text+0x25f702): undefined reference to `dma_mapping_error'
drivers/built-in.o: In function `sgdma_tx_buffer':
(.text+0x25f92a): undefined reference to `dma_sync_single_for_cpu'
drivers/built-in.o: In function `sgdma_rx_status':
(.text+0x25fa24): undefined reference to `dma_sync_single_for_cpu'
make[3]: *** [vmlinux] Error 1
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Vince Bridgers <vbridgers2013@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Right now the core vsock module is the owner of the proto family. This
means there's nothing preventing the transport module from unloading if
there are open sockets, which results in a panic. Fix that by allowing
the transport to be the owner, which will refcount it properly.
Includes version bump to 1.0.1.0-k
Passes checkpatch this time, I swear...
Acked-by: Dmitry Torokhov <dtor@vmware.com>
Signed-off-by: Andy King <acking@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
John W. Linville says:
====================
pull request: wireless 2014-05-01
Please pull the following batch of fixes intended for the 3.15 stream!
For the Bluetooth bits, Gustavo says:
"Some fixes for 3.15. There is a revert for the intel driver, a new
device id, and two important SSP fixes from Johan."
On top of that...
Ben Hutchings gives us a fix for an unbalanced irq enable in an
rtl8192cu error path.
Colin Ian King provides an rtlwifi fix for an uninitialized variable.
Felix Fietkau brings a pair of ath9k fixes, one that corrects a
hardware initialization value and another that removes an (unnecessary)
flag that was being used in a way that led to a software tx queue
hang in ath9k.
Gertjan van Wingerde pushes a MAINTAINERS change to remove himself
from the rt2x00 maintainer team.
Hans de Goede fixes a brcmfmac firmware load hang.
Larry Finger changes rtlwifi to use the correct queue for V0 traffic
on rtl8192se.
Rajkumar Manoharan corrects a race in ath9k driver initialization.
Stanislaw Gruszka fixes an rt2x00 bug in which disabling beaconing
once on USB devices led to permanently disabling beaconing for those
devices.
Tim Harvey provides fixes for a pair of ath9k issues that can lead
to soft lockups in that driver.
Please let me know if there are problems!
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Build console support only when CONFIG_TTY is selected.
This restores ISS as the default platform for allnoconfig builds.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
[PATCH v3 1/2] device_cgroup: check if exception removal is allowed
When the device cgroup hierarchy was introduced in
bd2953ebbb - devcg: propagate local changes down the hierarchy
a specific case was overlooked. Consider the hierarchy bellow:
A default policy: ALLOW, exceptions will deny access
\
B default policy: ALLOW, exceptions will deny access
There's no need to verify when an new exception is added to B because
in this case exceptions will deny access to further devices, which is
always fine. Hierarchy in device cgroup only makes sure B won't have
more access than A.
But when an exception is removed (by writing devices.allow), it isn't
checked if the user is in fact removing an inherited exception from A,
thus giving more access to B.
Example:
# echo 'a' >A/devices.allow
# echo 'c 1:3 rw' >A/devices.deny
# echo $$ >A/B/tasks
# echo >/dev/null
-bash: /dev/null: Operation not permitted
# echo 'c 1:3 w' >A/B/devices.allow
# echo >/dev/null
#
This shouldn't be allowed and this patch fixes it by making sure to never allow
exceptions in this case to be removed if the exception is partially or fully
present on the parent.
v3: missing '*' in function description
v2: improved log message and formatting fixes
Cc: cgroups@vger.kernel.org
Cc: Li Zefan <lizefan@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Unpaired quotes really confuse mutt when copy & pasting it into the To:
form.
Signed-off-by: Christoph Hellwig <hch@lst.de>
[ I'm going to remove all silly quotes entirely one day, but that day is
not today. So I'll just apply this - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 2 real bug-fixes from Tanya for the still "experimental" UBI fastmap feature
* a one-liner from Kees which hardens kernel security
* a small error-path fix, where we forget to free various resources in case of
failure - spotted by the "smatch" tool
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=L0f1
-----END PGP SIGNATURE-----
Merge tag 'upstream-3.15-rc5' of git://git.infradead.org/linux-ubifs
Pull ubifs fixes from Artem Bityutskiy:
"This includes the following fixes:
- two real bug-fixes from Tanya for the still "experimental" UBI
fastmap feature
- a one-liner from Kees which hardens kernel security
- a small error-path fix, where we forget to free various resources
in case of failure - spotted by the 'smatch' tool"
* tag 'upstream-3.15-rc5' of git://git.infradead.org/linux-ubifs:
UBI: avoid workqueue format string leak
UBI: fix ubi free PEBs count calculation
UBI: fix error path in __wl_get_peb
UBIFS: fix remount error path
Do not leak kernel-only floppy_raw_cmd structure members to userspace.
This includes the linked-list pointer and the pointer to the allocated
DMA space.
Signed-off-by: Matthew Daley <mattd@bugfuzz.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Always clear out these floppy_raw_cmd struct members after copying the
entire structure from userspace so that the in-kernel version is always
valid and never left in an interdeterminate state.
Signed-off-by: Matthew Daley <mattd@bugfuzz.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since commit 1df5a06a ("ALSA: hda - hdmi: Fix programmed active channel
count") channel count is no longer being set if monitor_present is 0.
This is because setting the count was moved after the CA value is
determined, which is only after the monitor_present check in
hdmi_setup_audio_infoframe().
Unfortunately, in some cases, such as with a non-spec-compliant codec or
with a problematic video driver, monitor_present is always 0. As a
specific example, this seems to happen with gen1 ATV (SiI1390 codec),
causing left-channel-only stereo playback (multi-channel playback has
apparently never worked with this codec despite it reporting 8 channels,
reason unknown).
Simply setting converter channel count without setting the pin infoframe
and channel mapping as well does not theoretically make much sense as
this will just mean they are out-of-sync and multichannel playback will
have a wrong channel mapping.
However, adding back just setting the converter channel count even in
no-monitor case is the safest change which at least fixes the stereo
playback regression on SiI1390 codec. Do that.
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Reported-by: Stephan Raue <stephan@openelec.tv>
Tested-by: Stephan Raue <stephan@openelec.tv>
Cc: <stable@vger.kernel.org> # 3.12+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This touchpad seriously dislikes init reports, not only timeing out, but
also refusing to work after this.
Cc: stable@vger.kernel.org
Reported-and-tested-by: Vincent Fortier <th0ma7@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The extra seven bits are only required when allocating the report buffer.
We can not use those extra bytes for the length of the report in the
generic implementation of .request because the device might (will) refuse
the set_report command.
This has been verified on the Atmel touchpad found on the Samsung Ativ 9
plus, which uses hid-multitouch and HID over I2C. Without this fix, the
device refuses to switch to the multitouch mode, and it becomes unresponsive
from the user point of view.
Actually, this has been discussed during the initial submission of the
commit 4fa5a7f76c, see
https://patchwork.kernel.org/patch/3621751/
Unfortunately, I completely forgot about it later.
Reported-by: Matthias Bayer <thematthiasbayer@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
When building the name for the workqueue thread, make sure a format
string cannot leak in from the disk name.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
The ubi->free_count should be updated with every insert/remove to/from
the ubi->free list.
Signed-off-by: Tanya Brokhman <tlinder@codeaurora.org>
Reviewed-by: Dolev Raviv <draviv@codeaurora.org>
Acked-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
In case of an error (if there are not free PEB's for example),
__wl_get_peb will return a negative value. In order to prevent access
violation we need to test the returned value prior to using it later on.
Signed-off-by: Tatyana Brokhman <tlinder@codeaurora.org>
Reviewed-by: Dolev Raviv <draviv@codeaurora.org>
Acked-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Dan's "smatch" checker found out that there was a bug in the error path of the
'ubifs_remount_rw()' function. Instead of jumping to the "out" label which
cleans-things up, we just returned.
This patch fixes the problem.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
We have had this code in the kernel for over a year now and have
shaken all the known issues out of the code over the past few
releases. It's now time to remove the experimental warnings during
mount and fully support the new filesystem format in production
systems.
Remove the experimental warning, and add a version number to the
initial "mounting filesystem" message to tell use what type of
filesystem is being mounted. Also, remove the temporary inode
cluster size output at mount time now we know that this code works
fine.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
- pci
- fix off-by-one for mbus window size
- split BARs into multiple mbus windows when needed
- mbus
- avoid setting undefined window size
- allow several windows with the same target/attr
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQIcBAABAgAGBQJTX6KOAAoJEP45WPkGe8ZnK14QAJoddpkgzp7sgANXpE3SlpA/
FycxazhA8s4giZKiPcFy93sl8SYEvpB8l9UDRhvImTlbifrB+PpBBQf77RyAH3w9
vJIwuLC2BwLJEaY4CzA0ahIvhhik/nextB4btVQoh0iqxix9Elk+BZh7QspCxYkC
vkGdFoEiLuI73SxMv2qNMhfz24UbrctZwZlMxRB1Lbo0YCY8SkQMeK8d4ZwzNHhx
10jyGcpINQcUb5Z5vmyGrdvOEFTmOWcn5gflNpj1keKfHbdzDRomrPzX99udWMll
0tAuCcK8iW7kG2w5RiBU9IPd7eVgi3lf6tZmUB4JEYak8W7C/TcjxfRSdMNU7G/k
dwDHcmD67UOvLlOwoZW5eCG1tmyUfAeTwKxZKAR97tkiXdcEK49EsY348LEWzQuo
ZG2OLvjXwBo8y5kOHIOd3cZAdmTh9HSt1HgZkzU+vZFZWQAcM8PRKaR7/dyovTq8
gUUifjjQ1HHzlOAJ12j3C98jUDts64sJCB54CXDTJlWZn3fw3cYiZJhrJJtpdGn5
94GGwUvLX1dd9uSV1rq6/1tJc7q7IpgdWSjiPUE2zyXL91PLmElB7wjrsyphBAcJ
0QWx1j8V6fBDtveYfjwzMDhYDjZGqkJHV1L5k+NEy2VsgrT3aX9EkbHnYRsS6jNb
9fmP83qeahAZusCEqQ2v
=b3o7
-----END PGP SIGNATURE-----
Merge tag 'mvebu-mbus_pci-fixes-3.15' of git://git.infradead.org/linux-mvebu into fixes
From Jason Cooper:
mvebu drivers (mbus and pci) fixes for v3.15
- pci
- fix off-by-one for mbus window size
- split BARs into multiple mbus windows when needed
- mbus
- avoid setting undefined window size
- allow several windows with the same target/attr
* tag 'mvebu-mbus_pci-fixes-3.15' of git://git.infradead.org/linux-mvebu:
PCI: mvebu: split PCIe BARs into multiple MBus windows when needed
bus: mvebu-mbus: allow several windows with the same target/attribute
bus: mvebu-mbus: Avoid setting an undefined window size
PCI: mvebu: fix off-by-one in the computed size of the mbus windows
Signed-off-by: Olof Johansson <olof@lixom.net>
- mvebu
- fix NOR bus width on Armada XP boards
- use qsgmii on Armada XP GP board
- add i2c bus freq for Armada 370 DB board
- add SATA interface for Armada 375 DB
- kirkwood
- fix double probe of audio codec for T5325
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=6yRE
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt-fixes-3.15' of git://git.infradead.org/linux-mvebu into fixes
From Jason Cooper:
mvebu DT fixes for v3.15
- mvebu
- fix NOR bus width on Armada XP boards
- use qsgmii on Armada XP GP board
- add i2c bus freq for Armada 370 DB board
- add SATA interface for Armada 375 DB
- kirkwood
- fix double probe of audio codec for T5325
* tag 'mvebu-dt-fixes-3.15' of git://git.infradead.org/linux-mvebu:
ARM: Kirkwood: T5325: Fix double probe of Codec
ARM: mvebu: enable the SATA interface on Armada 375 DB
ARM: mvebu: specify I2C bus frequency on Armada 370 DB
ARM: mvebu: use qsgmii phy-mode for Armada XP GP interfaces
ARM: mvebu: fix NOR bus-width in Armada XP OpenBlocks AX3 Device Tree
ARM: mvebu: fix NOR bus-width in Armada XP DB Device Tree
ARM: mvebu: fix NOR bus-width in Armada XP GP Device Tree
Signed-off-by: Olof Johansson <olof@lixom.net>
- devbus: fix bus-width conversion
- orion5x: fix target ID for crypto SRAM window
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQIcBAABAgAGBQJTX5gJAAoJEP45WPkGe8ZnXLQP/1EpsDvA8bdCm+kspEBMScpN
Ji3N1F6XTjYRI/YbpwvJra1UZyZDx2rNaA1ofGDLLTZiELO0pOMeE8gGouG6lZaA
OZf1Hq5T0pKkq8XkqUhKqgZ3QNUmCjaWL2FCkAIuiFDaCFpops2aCRy1YO3nht6o
ymhJ/MQwdvCG+pMVfaVNMmnxroA9uiu7OPLtfwru8+7kghGWfa/LNCM5H4+TOEG9
vV5onWrBzzTQCq1X12+a5qgOsOmlRdo69EZ2j0Rq/aHg5c9+Bxa2u5OncBe0txOa
blC42x9gTVtOY3sUTkFcyF1HMIC/PajZhWHkJKIqFJfVF11GVFc38LwWJewIsgaH
OxSwMZQOL4CcRTGl2nwxF4L2TVefYimJgNXsjEe0i7FNahtT/pUS4gz56XDE1iK5
sIZE//GevJ0eFDk9kCKEZYJkqiSTgrw05wHb5CVlHIy5fi5jG9prYzBqDam57Ohi
JOpVyC9+sodY7VkLMgqZc1XW492LB0JXdSOn473k8E4j5dK2JVzLd7GljiHXFc8P
MM/drQGmXa4O85lliD2RLTW1ca40AFbtgimHkQjBIAm1YCaUcZhEp5TUpA40BoBN
IA+GP6TtN2ha39gk1AbMx773aaRcK28p1B+epfkF2CPuTYuaMYnp51UcVK2Xugvt
QiD1tZJB3FpyIEqRqecS
=k1Ts
-----END PGP SIGNATURE-----
Merge tag 'mvebu-fixes-3.15' of git://git.infradead.org/linux-mvebu into fixes
From Jason Cooper:
mvebu fixes for v3.15
- devbus: fix bus-width conversion
- orion5x: fix target ID for crypto SRAM window
* tag 'mvebu-fixes-3.15' of git://git.infradead.org/linux-mvebu:
ARM: orion5x: fix target ID for crypto SRAM window
memory: mvebu-devbus: fix the conversion of the bus width
Signed-off-by: Olof Johansson <olof@lixom.net>
timings for smc911x LAN9220 (and potentially LAN9221) devices
that were noted on a cm-t3730 system. Also fix THUMB mode
for SMP, and mailbox related warnings when booted with device
tree.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=8NVy
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v3.15/fixes-gpmc' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Merge fixes from Tony Lindgren:
Mostly fixes for occasional memory corruption caused by bad
timings for smc911x LAN9220 (and potentially LAN9221) devices
that were noted on a cm-t3730 system. Also fix THUMB mode
for SMP, and mailbox related warnings when booted with device
tree.
* tag 'omap-for-v3.15/fixes-gpmc' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: AM3517: Disable absent IPs inherited from OMAP3
ARM: dts: OMAP2: Fix interrupts for OMAP2420 mailbox
ARM: dts: OMAP5: Add mailbox dt node to fix boot warning
ARM: OMAP5: Switch to THUMB mode if needed on secondary CPU
ARM: dts: am437x-gp-evm: Do not reset gpio5
ARM: dts: omap3-igep0020: use SMSC9221 timings
ARM: dts: Fix GPMC timings for LAN9220
ARM: dts: Fix GPMC Ethernet timings for omap cm-t sbc-t boards for device tree
ARM: dts: Fix bad OTG muxing for cm-t boards
Signed-off-by: Olof Johansson <olof@lixom.net>
Commit 54397d8534
("ARM: kirkwood: Relocate PCIe device tree nodes")
moved the pcie-controller nodes for the Kirkwood SoCs to the mbus
bus node. For some reason, two boards were not properly converted
and have their pci-controller nodes still in the ocp bus node.
As the corresponding SoC pcie-controller does not exist anymore,
it is likely that pcie is broken on those boards since above commit.
Fix it by moving the pcie related nodes to the correct location.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Fixes: 54397d8534 ("ARM: kirkwood: Relocate PCIe device tree nodes")
Cc: <stable@vger.kernel.org> # v3.12+
Acked-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lkml.kernel.org/r/1398862602-29595-2-git-send-email-sebastian.hesselbarth@gmail.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
On 64 bit systems the agp_info struct has a 4 byte hole between
->agp_mode and ->aper_base. We need to clear it to avoid disclosing
stack information to userspace.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
hhf_change() takes the sch_tree_lock and releases it but misses the
error cases. Fix the missed case here.
To reproduce try a command like this,
# tc qdisc change dev p3p2 root hhf quantum 40960 non_hh_weight 300000
Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- only an email address change to the MAINTAINERS file
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=JLHy
-----END PGP SIGNATURE-----
Merge tag 'locks-v3.15-3' of git://git.samba.org/jlayton/linux
Pull file locking change from Jeff Layton:
"Only an email address change to the MAINTAINERS file"
* tag 'locks-v3.15-3' of git://git.samba.org/jlayton/linux:
MAINTAINERS: email address change for Jeff Layton
arm64 move of of_clk_init() call in a previous commit
- Default DMA ops changed to non-coherent to preserve compatibility with
32-bit ARM DT files. The "dma-coherent" property can be used to
explicitly mark a device coherent. The Applied Micro DT file has been
updated to avoid DMA cache maintenance for the X-Gene SATA controller
(the only arm64 related driver with such assumption in -rc mainline)
- Fixmap correction for earlyprintk
- kern_addr_valid() fix for huge pages
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)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=kRLA
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
"These are mostly arm64 fixes with an additional arm(64) platform fix
for the initialisation of vexpress clocks (the latter only affecting
arm64; the arch/arm64 code is SoC agnostic and does not rely on early
SoC-specific calls)
- vexpress platform clocks initialisation moved earlier following the
arm64 move of of_clk_init() call in a previous commit
- Default DMA ops changed to non-coherent to preserve compatibility
with 32-bit ARM DT files. The "dma-coherent" property can be used
to explicitly mark a device coherent. The Applied Micro DT file
has been updated to avoid DMA cache maintenance for the X-Gene SATA
controller (the only arm64 related driver with such assumption in
-rc mainline)
- Fixmap correction for earlyprintk
- kern_addr_valid() fix for huge pages"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
vexpress: Initialise the sysregs before setting up the clocks
arm64: Mark the Applied Micro X-Gene SATA controller as DMA coherent
arm64: Use bus notifiers to set per-device coherent DMA ops
arm64: Make default dma_ops to be noncoherent
arm64: fixmap: fix missing sub-page offset for earlyprintk
arm64: Fix for the arm64 kern_addr_valid() function
This is two patches both fixing bugs in drivers (virtio-scsi and mpt2sas)
causing an oops in certain circumstances.
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJTZdBVAAoJEDeqqVYsXL0MIYMIAI/rDIV/MeF0OZd3nzTaEAIG
i8HPPgBTmSKmK3q04Pjjtc1CHW3unH6cr1tG1L4r1tyoxwcnZ0+x87fi3KcLIpBb
G6o/31QpniNQ/3LNdwCHtyl760XVZhWz6XpJ/NCmWuYeKx1RmT3W+ggnXD+fznNs
3h347rIrr4efkgRJIzzfi6pYa55VmvI6M7J/RpXmMg/IcfF+GBJfyEp0AsmIoYno
YVwFBB8h9cVsgvhROn8i1pYq1YOf9jo298LLMULMIvu9iZWHp57GOzA4HzyEa9kp
T1I6AzwJGbmirJsm0yD1hKgJns3Za+ZA3FeP5qQ7BX38YI7EKkkd+qtCMzT1YfY=
=whLk
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is two patches both fixing bugs in drivers (virtio-scsi and
mpt2sas) causing an oops in certain circumstances"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
[SCSI] virtio-scsi: Skip setting affinity on uninitialized vq
[SCSI] mpt2sas: Don't disable device twice at suspend.
Moving more extensive explanations to the end of the comment.
Cc: Li Zefan <lizefan@huawei.com>
Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
of the framebuffer when early_ioremap() is no longer available and
dropping __init from functions that may be invoked after
free_initmem() - Dave Young
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJTZIL0AAoJEC84WcCNIz1Vr9gP/RCHnmo9+w88ujYMjXtoq+/b
qDX/Fl8/as/gJ8cKhOVlQpC/t4VbC28mRkxV3J8NS/AklY0mU2R8TatprIyUoKAI
oPZwdSbuEIS8ehCr/D+6aAIGLtFYaLD8VK27niNHEHVytZytPqQGpDKARgphin5l
AqtEUv9NNfLaN/aHUuMV33xlD4r25BoWlj3RD2h+Rpnu2/vBXs14NTBN1r+SrLFh
r8htTDsbm3NjDCvboYyPJjnFZvlYqxtLCBC2vVD8fBvaXcBmj/vLP6WmFd3sxbTZ
4CLmRMShaqh87JH9gdg0m/xJ5sEgRqqvMiqjcaAuJzAew0eE6gUZjE9+fawWYHwT
XU0kcsM9wn/014f9fUdqaqM38o/XbnVcW+D5iSrwcx6hhNHzf7nFGnSndN2tednQ
k3z3tpX/GB9u5l0064Clru6GbSnV2cSfayaoIc4sULDrp7KBmyrlwBtsQ67C/JfV
0gJ4ridzbFllHBiw3Cyw8vzLDPgQ6t2DGw6RkzUpbMwLZG5YMRcyNODWewcTuH7g
VcMMaDKVw7uCrItFyTscMuUe1nVnbZANdLu9znF8TejgX1MzwwmdetqAE/WPR+3V
vZoYGNE5zAwGhqF34BLSof9BHoeOjucx1qgaV3QYhrdtgtTXaGf++TvwOhpCVNOC
vhUguxcrMLOM68He6o5H
=BzhM
-----END PGP SIGNATURE-----
Merge tag 'efi-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi into x86/urgent
Pull EFI fix from Matt Fleming:
" * Fix earlyprintk=efi,keep support by switching to an ioremap() mapping
of the framebuffer when early_ioremap() is no longer available and
dropping __init from functions that may be invoked after
free_initmem() - Dave Young "
Signed-off-by: Ingo Molnar <mingo@kernel.org>
