prepare for runtime judging for SSI work
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Parent SSI is needed if it is PIN sharing and clock master,
otherwise, not needed. But, whether clockk master is judged on
.set_fmt, thus, it can't call rsnd_ssi_parent_attach() on .probe.
Now, .pcm_new will be called after .set_fmt, so this patch reuses it
at this point.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
SSI want to have SSIWSR settings and SSICR settings without EN bit
when init, and SSICR EN bit only when start timing.
Otherwise, SSI output signal might be unstable.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
commit b5b442abd9 ("ASoC: rsnd: add .irq callback") added .irq callback
but SSI DMA is missing it. This patch adds it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
commit b5b442abd9 ("ASoC: rsnd: add .irq callback")
added .irq support, and it cares both parent SSI and normal SSI.
But it should care only normal SSI. Otherwise SSI might be
forever loop if SSI is used as both parent SSI and normal SSI
(= 2 users), and if under/over run error happen. Because irq disable
do nothing in such case. This patch solve this issue.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
To reduce confusion, SSI uses "mod" instead of "ssi"
as function parameter
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
SRC_ROUTE_MODE0 determines whether to use SRC.
Thus, it should be setup before SRC_SRCIR.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The channels number is not only for DVC. Let's rename it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
b4c83b171 ("ASoC: rsnd: add Multi channel support") added
Multi channel support, and current rsnd_ssi_is_multi_slave()'s check
method is !SSI equals SSIM1/2/3. But, SSI parent also hit to this macro.
Because of this reason, some stream which needs SSI parent clock
can't work correctly. This patch uses rsnd_ssi_multi_slaves() to
solve this issue. This issue was reported by Dung.
Reported-by: Nguyen Viet Dung <nv-dung@jinso.co.jp>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current rsnd driver has .init/.start/.stop/.quit callbacks,
and it needs many IPs (SRC/CTU/MUX/DVC/CMD/SSIU/SSI).
Because of these relationship, it might get unnecessary
error IRQ when start/stop.
This patch adds new .irq callback and control IRQ enable/disable
timing to avoid it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Renesas R-Car sound needs recovery (= restart) when under/over run
error occurred, and current driver tries it on under/over run error
handler automatically. But this recovery should be handled by userland,
not kernel. This patch stops XRUN when under/over run error occur, and
will leave the recovery of HW in userland.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
commit b761bf272b ("ASoC: rsnd: disable SRC.out only when stop timing")
disabled SRC.out/in in different timing, but was based on
picky HW information. Now, we have confirmed that we can disable
both in the same time. This patch do it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current CTU settings was rough. This patch makes it match to datasheet.
But do nothing at this point.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
SSI/SRC will try to attach DMAC as Audio-DMAC or Audio-DMAC-periperi.
It is fixed IP, but will be attached to each streams as different module
in case of MUX (= multi sound path will be merged).
This patch solves this issue.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
SSI will be used as normal SSI or as clock parent SSI. Therefor,
rsnd driver wants to control SSI and parent SSI separately. Otherwise it
can't use Playback/Capture in the same time.
And it has been done by c2dc47d5cf("ASoC: rsnd: rsnd_dai_stream has each
mod's status insted of rsnd_mod") before.
OTOH, rsnd driver doesn't want to control CTU/MUX/DVC/SSIU/SSI in
separately. Otherwise, these will be re-initialized during playing if
MUX merges 2 sounds.
Because of these picky reasons, this patch re-defines status on each mod,
and add new parent_ssi_status on rsnd_dai_stream.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
To select CMD data patch, it should use correct SRC from each stream
in MUX case. But current code is selecting SRC from fixed stream.
This patch solves this issue.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current rsnd_cmd_init() overwrites "io" which will be used end of this
function. This patch solved this issue.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
CTU/MUX/DVC/SSIU/SSI/Audio-DMAC-periperi might be used under multipath.
So, probe()/remove() need to be called multiple times.
This patch allows it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
If system uses CTU/MUX, CTU/MUX/DVC will try to connect same CMD to
system, but it is not error in this case.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
If system uses CTU/MUX, and if probe error happened, it will try to
call rsnd_dai_call(remove, ...). Then, MUX/DVC/SSIU/SSI might be called
without calling rsnd_dai_call(probe, ...). Then, each mod status might
be un-matched. It doesn't call un-matched remove function by this patch.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
rsnd_mod_call() tries to call each IP's relevant function. But it is
difficult to understand which function returned error.
This patch adds debug message for this purpose
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current ADG doesn't use rsnd_mod_init(), but this limitation is no
longer necessary. Let's use common rsnd_mod_init()
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The bitwise OR has higher precedence than ?: so the val2 was always set
to 0x2.
Fixes: b4c83b1715 ('ASoC: rsnd: add Multi channel support')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Field usrcnt is unsigned so it cannot be lesser than zero.
The patch fixes the check, moves it to the beginning of the function
and changes return value to -EIO in case of usercnt error.
The problem has been detected using proposed semantic patch
scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci [1].
[1]: http://permalink.gmane.org/gmane.linux.kernel/2038576
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds Multi channel support on Renesas R-Car sound.
This patch is tested on Salvator-X board, but it can't use
Multi channel, because supported format is different between
codec chip and R-Car.
Thus, it was tested on board which doesn't mount codec chip,
with oscilloscope.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current rsnd driver is using complex macro to parse DAI connection.
This patch adds new rsnd_parse_connect_common() and replace current
macro to it.
This is prepare for multi channel support
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
TDM will use 6 or 8 slots on 1 SSI, and Multi channel will use
6 or 8 slots on few SSI (each SSI uses 2 slots).
Thus, this adds new slot control functions which can be prepare
for Multi channel support.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
rsnd_get_slot_rdai() returns total slots (it returns 6 if total 6
channels) , and rsnd_get_slot_extend() returns extended SSI width
(it returns 8 if total 6 channels). This will be used on SSI multi
channel support too (It will return 2 if total 6 channels with 3 SSI).
But, it is using confusable naming.
This patch changes rsnd_get_slot_rdai() -> rsnd_get_slot(),
rsnd_get_slot_extend() -> rsnd_get_slot_width()
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current Renesas sound driver is using rsnd_get_slot_runtime(), but
it is same as runtime->channels. This patch removes
rsnd_get_slot_runtime()
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current SSI/SSIU are using rsnd_get_slot_runtime() to check TDM,
but using rsnd_get_slot_extend() is more sane.
This patch fix it up
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
It can't output corrent dma name *before* rsnd_mod_init().
It goes to *after* rsnd_mod_init() by this patch
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Renesas sound driver has rsnd_get_adinr_bit/chan() functions.
It is assuming _bit() returns ADINR :: OTBL,
and _chan() returns ADINR :: CHNUM.
Current _bit() returns both OTBL and CHNUM. This patch fixup it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
SSIU should be controlled after SSI. This patch fix up it
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
rsrc-card is DPCM supported version of simple-card. Thus it has similar
DT format. OTOH, snd_soc_dai_link requests cpu/codec, but one of them
will be snd-soc-dummy in DPCM case, and DPCM requests frontend/backend
dai_link. This means it might have multi backend/codec.
And, SND_SOC_DAIFMT_xxx is based on "codec". Because of these
difference, current rsrc card can't detect correct dai_fmt.
This patch detect correct dai fmt from 1st "codec".
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
1efb53a220 ("ASoC: simple-card: Remove support for setting differing
DAI formats") removed set_fmt support from simple-card.
rsrc-card follows same style, because it is based on simple-card.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Renesas sound driver will use tdm slot on TDM Multi Mode support.
This patch enables tdm slot on rsrc card driver on DT.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
We use ret as the return value from the rsnd_mix_probe() but if there
are no child nodes and no errors then we will never initialize ret leading
to build warnings. Ensure ret is initialized before we iterate over the
child nodes to avoid this.
Signed-off-by: Mark Brown <broonie@kernel.org>
We use ret as the return value from the rsnd_dvc_probe() but if there
are no child nodes and no errors then we will never initialize ret leading
to build warnings. Ensure ret is initialized before we iterate over the
child nodes to avoid this.
Signed-off-by: Mark Brown <broonie@kernel.org>
We use ret as the return value from the rsnd_ctu_probe() but if there
are no child nodes and no errors then we will never initialize ret leading
to build warnings. Ensure ret is initialized before we iterate over the
child nodes to avoid this.
Signed-off-by: Mark Brown <broonie@kernel.org>
L/R channel data has been treated as inverted on R-Car sound 16bit mode,
Thus, 4689032b1("ASoC: rsnd: tidyup data align position") tidyuped data
align position. But it couldn't care about capture case. This patch
cares both playback/capture
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
SSICR::SWSP bit controls WS signal low/high, but in case of TDM
it is inverted. This patch solves this issue.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds missing check of snd_soc_of_get_dai_name().
It might not be able to use sound card, because it might returns
-EPROBE_DEFER.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
drv pointer should be "base + offset" instead of
"current + offset". This patch fixup this issue, otherwise
third and subsequent pointer will be broken
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Renesas R-Car can out TDM by
1) 6ch x 1 DAI as TDM Extend Mode
2) 2ch x 4 x 1 DAI as TDM split Mode
3) 2ch x 3 DAI or
2ch x 4 DAI as TDM Multichannel Mode
This patch adds 1) TDM Extend Mode. Because of HW design,
this 6ch data will be outputed via 8ch data width.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current DVC is assuming that the sound is always stereo.
This patch makes it more flexible
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current SSI is assuming that the sound is always stereo. But, SSI needs
to calculate its frequency when master mode. Then This frequency depends
on each SSI's slots, and TDM mode (= TDM Extend Mode, TDM split Mode,
TDM Multichannel Mode).
This patch enables to use non-stereo sound.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
It will have TDM settings on SSIWSR. Actually, we would like to set
it on rsnd_ssi_config_init(), but we can't. Because SSI might be used
as clock master (It doesn't need to call rsnd_ssi_config_init() when
clock master mode).
This patch adds new ssi->wsr and set it on rsnd_ssi_start().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
In order to enhance code readability, this patch adds
rsnd_ssi_config_init() and moves SSICR register settings to it.
This is prepare patch for TDM support
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
SRC_BUSIF_MODE has both IN/OUT register. Current src driver sets
IN register only. This patch sets missing OUT register.
IN/OUT register are using default setting, so, there is no
HW effect.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
DVC/SRC/SSIU needs ADINR::CHNUM settings too. This patch adds
these missing value.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
adg.c is used from ssi/src/cmd. Thus don't use confusable *mod here.
This patch rename it to ssi_mod/src_mod/cmd_mod
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
rsnd_ssi_record_error() should recorde error, but it clears error too.
this patch fixes up semantic of rsnd_ssi_record_error that it records
error but doesn't clear error.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
rsnd_src_error_record() should recorde error, but it clears error too.
this patch fixes up semantic of rsnd_src_error_record that it records
error but doesn't clear error.
And this patch renames
rsnd_src_error_clear() to rsnd_src_status_clear()
rsnd_src_error_record() to rsnd_src_record_error()
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current rsnd driver is indicating how to use regmap debug method
on gen.c comment area.
regmap debug method indicates address and value, but rsnd driver is
using too many IPs (SSI/SSIU/SRC/CTU/MIX/DVC/CMD), and address.
Thus, we would like to know more useful information for debugging.
This patch indicates address name for debugging.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
After a recent cleanup, the soc_card variable became unused
and now produces a warning:
soc/sh/rcar/core.c: In function '__rsnd_kctrl_new':
soc/sh/rcar/core.c:801:23: warning: unused variable 'soc_card' [-Wunused-variable]
This removes the variable.
Fixes: 1a497983a5 ("ASoC: Change the PCM runtime array to a list")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
As this driver can now be compiled for ARM64, we get a new warning
as a result of passing a DMA filter data pointer through an 'int':
sound/soc/sh/fsi.c: In function 'fsi_dma_probe':
sound/soc/sh/fsi.c:1372:24: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
shdma_chan_filter, (void *)io->dma_id,
We already know that we only need the legacy filter function on
arch/sh, so we can hide the legacy DMA interface function
behind an #ifdef. This has the other advantage of no longer
depending on the shdma_chan_filter function to be visible.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
64bit compiler indicates this without this patch
linux/sound/soc/sh/rcar/core.c: In function 'rsnd_probe':
linux/sound/soc/sh/rcar/core.c:1002:16: warning: cast from pointer to\
integer of different size [-Wpointer-to-int-cast]
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently the number of DAI links is statically defined by the machine
driver at build time using an array. This makes it difficult to shrink/
grow the number of DAI links at runtime in order to reflect any changes
in topology.
We can change the DAI link array in the core to a list so that PCMs and
FE DAI links can be added and deleted at runtime to reflect changes in
use case and DSP topology. The machine driver can still register DAI links
as an array.
As the 1st step, this patch change the PCM runtime array to a list. A new
PCM runtime is added to the list when a DAI link is bound successfully.
Later patches will further implement the DAI link list.
More:
- define snd_soc_new/free_pcm_runtime() to create/free a runtime.
- define soc_add_pcm_runtime() to add a runtime to the rtd list.
- define soc_remove_pcm_runtimes() to clean up the runtime list.
- traverse the rtd list to probe the link components and dais.
- Add a field "num" to PCM runtime struct, used to specify the device
number when creating the pcm device, and for a soc card to access
its dai_props array.
- The following 3rd party machine/platform drivers iterate the rtd list
to check the runtimes:
sound/soc/intel/atom/sst-mfld-platform-pcm.c
sound/soc/intel/boards/cht_bsw_rt5645.c
sound/soc/intel/boards/cht_bsw_rt5672.c
sound/soc/intel/boards/cht_bsw_max98090_ti.c
Signed-off-by: Mengdong Lin <mengdong.lin@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current Renesas sound driver requests struct platform_device on
probe/remove for each modules. But driver can get it by
rsnd_priv_to_pdev(). This patch removes unnecessary parameter
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
No board is using Renesas sound driver via platform boot now.
This means all user is using DT boot. Platform boot support is
no longer needed. But, it strongly depends on platform boot style.
Now, platform boot style was removed from driver.
This is cleanup patch, and remove pointless struct rcar_snd_info
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
No board is using Renesas sound driver via platform boot now.
This means all user is using DT boot. Platform boot support is
no longer needed. But, it strongly depends on platform boot style.
Now, platform boot style was removed from driver.
This is cleanup patch, and remove pointless struct rsnd_of_data
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
No board is using Renesas sound driver via platform boot now.
This means all user is using DT boot. Platform boot support is
no longer needed. But, it strongly depends on platform boot style.
This patch removes platform boot support from gen.c
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
No board is using Renesas sound driver via platform boot now.
This means all user is using DT boot. Platform boot support is
no longer needed. But, it strongly depends on platform boot style.
This patch removes platform boot support from dvc.c
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
No board is using Renesas sound driver via platform boot now.
This means all user is using DT boot. Platform boot support is
no longer needed. But, it strongly depends on platform boot style.
This patch removes platform boot support from mix.c
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
No board is using Renesas sound driver via platform boot now.
This means all user is using DT boot. Platform boot support is
no longer needed. But, it strongly depends on platform boot style.
This patch removes platform boot support from ctu.c
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
No board is using Renesas sound driver via platform boot now.
This means all user is using DT boot. Platform boot support is
no longer needed. But, it strongly depends on platform boot style.
This patch removes platform boot support from src.c
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
No board is using Renesas sound driver via platform boot now.
This means all user is using DT boot. Platform boot support is
no longer needed. But, it strongly depends on platform boot style.
This patch removes platform boot support from ssi.c
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
No board is using Renesas sound driver via platform boot now.
This means all user is using DT boot. Platform boot support is
no longer needed. But, it strongly depends on platform boot style.
This patch removes platform boot support from core.c
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current SRC settings order was rough. Now, Gen1 support was removed.
This patch makes it cleanup and match to datasheet.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
SRC Gen1 support was removed. Current rsnd driver is sharing Gen1/Gen2
register index to reduce memory, but there is no effect anymore.
Let's remove share definition and merge RSND_REG_xxx
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch removes SRC Gen1 support which has no user on upstream.
Historically, SRC Gen1 was created as prepare for SRC Gen2 support.
It works well for Gen2 support, but Gen1 is not same as Gen2.
So now, Gen1 support is no longer needed. Thanks Gen1 and Bye-bye.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Data left/right aligned is controlled by PDTA bit on SSICR.
But default is left-aligned. Thus 24bit sound will be very small sound
without this patch.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
8616774("ASoC: rnsd: fix build regression without CONFIG_OF")
added "depends on DMA_OF" in SND_SOC_RCAR to avoid compile error of
sound/built-in.o: In function `rsnd_dma_request_channel':
:(.text+0x9fb84): undefined reference to `of_dma_request_slave_channel'
But, it was OF base DMAEngine API definition issue, not SND_SOC_RCAR
issue. This patch remove DMA_OF dependence.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ADG can output AUDIO_CLKOUTx, and these are generated from
AUDIO_CLKx. Thus we need to call clk_prepare()/clk_enable()
for AUDIO_CLKx.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
f1df12290("ASoC: rsnd: add common mod confirm method")
added rsnd_mod_make_sure(), but rsnd_mod_xxx() comment position
was wrong. This patch tidyup it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current MIX settings order was rough.
This patch makes it match to datasheet.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current DVC settings order was rough.
This patch makes it match to datasheet.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
8cca6e11c1 ("ASoC: rsnd: use mod base common method on CMD")
added cmd.c. Let's move CMD related operation to cmd.c
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
If the "clock-frequency" DT property is not found, req_rate is used
uninitialized, and the "audio_clkout" clock will be created with an
arbitrary clock rate.
This uninitialized kernel stack data may leak to userspace through
/sys/kernel/debug/clk/clk_summary, cfr. the value in the "rate" column:
clock enable_cnt prepare_cnt rate accuracy phase
--------------------------------------------------------------------
audio_clkout 0 0 4001836240 0 0
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
45a4394d03("ASoC: rsnd: use mod base common method on DMA phase3")
Exchanged "void rsnd_dmapp_stop()" to "int rsnd_dmapp_stop()",
but it returns inverted value. This patch fixup it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2d604e03("ASoC: rsnd: disable SRC.out only when stop timing")
added rsnd_src_quit_gen2(), but it should call rsnd_src_quit()
same as before. This patch fixup it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Renesas sound needs many devices
(SSI/SSIU/SRC/CTU/MIX/DVC/CMD/AudioDMAC/AudioDMACpp).
SSI/SRC/CTU/MIX/DVC are implemented as module.
SSI parent, SSIU are implemented as part of SSI
CMD is implemented as part of CTU/MIX/DVC
AudioDMAC/AudioDMACpp are implemented as part of SSI/SRC
It is nice sense that these all devices are implemented as mod.
This patch makes SSI parent mod base common method
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Renesas sound needs many devices
(SSI/SSIU/SRC/CTU/MIX/DVC/CMD/AudioDMAC/AudioDMACpp).
SSI/SRC/CTU/MIX/DVC are implemented as module.
SSI parent, SSIU are implemented as part of SSI
CMD is implemented as part of CTU/MIX/DVC
AudioDMAC/AudioDMACpp are implemented as part of SSI/SRC
It is nice sense that these all devices are implemented as mod.
This patch makes SSIU mod base common method
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Renesas sound needs many devices
(SSI/SSIU/SRC/CTU/MIX/DVC/CMD/AudioDMAC/AudioDMACpp).
SSI/SRC/CTU/MIX/DVC are implemented as module.
SSI parent, SSIU are implemented as part of SSI
CMD is implemented as part of CTU/MIX/DVC
AudioDMAC/AudioDMACpp are implemented as part of SSI/SRC
It is nice sense that these all devices are implemented as mod.
This patch makes CMD mod base common method
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Renesas sound needs many devices
(SSI/SSIU/SRC/CTU/MIX/DVC/CMD/AudioDMAC/AudioDMACpp).
SSI/SRC/CTU/MIX/DVC are implemented as module.
SSI parent, SSIU are implemented as part of SSI
CMD is implemented as part of CTU/MIX/DVC
AudioDMAC/AudioDMACpp are implemented as part of SSI/SRC
It is nice sense that these all devices are implemented as mod.
This patch makes DMA mod bse common method
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Renesas sound needs many devices
(SSI/SSIU/SRC/CTU/MIX/DVC/CMD/AudioDMAC/AudioDMACpp).
SSI/SRC/CTU/MIX/DVC are implemented as module.
SSI parent, SSIU are implemented as part of SSI
CMD is implemented as part of CTU/MIX/DVC
AudioDMAC/AudioDMACpp are implemented as part of SSI/SRC
It is nice sense that these all devices are implemented as mod.
DMA will be implemented as module. Then rsnd_dma_ops will be rebased
to rsnd_mod_ops, but these are similar, but different function.
This patch modify rsnd_dma_ops same style as rsnd_mod_ops.
This is prepare for final merge
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Renesas sound needs many devices
(SSI/SSIU/SRC/CTU/MIX/DVC/CMD/AudioDMAC/AudioDMACpp).
SSI/SRC/CTU/MIX/DVC are implemented as module.
SSI parent, SSIU are implemented as part of SSI
CMD is implemented as part of CTU/MIX/DVC
AudioDMAC/AudioDMACpp are implemented as part of SSI/SRC
It is nice sense that these all devices are implemented as mod.
DMA will be implemented as module. Then rsnd_dma will be mod base.
This patch makes rsnd_dma mod base, but still not yet completely
finished. This mod is not yet installed to system at this point.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current ssi.c driver has random access to SSISR register. Let's use
common rsnd_ssi_status_xxx() function
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current Renesas sound driver doesn't have 1:1 relationship between
stream <-> mod because it is supporting MIX. Because of this reason
rsnd_mod_interrupt() is searching correspond mod by for loop.
But this loop is not needed, because each mod has own type.
This patch avoid pointless loop by using mod->type.
This patch is good for SSI-parent support, because stream might have
2 SSI as SSI-parent/child. SSI interrupt handler will be called twice
if stream has SSI-parent without this patch.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current SSI/SRC restarts HW if under/over flow happened to avoid L/R
invert issue. But it will stop HW if too many error happen.
But if it stops on HW, other side under/over flow happen. OTHA, it will
be forever loop interrupt if something strange error happen on
HW/driver without escape route of large number error.
To avoid this issue, it indicates error message if large number error
occur, and disables error interrupt.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Renesas sound needs many devices
(SSI/SSIU/SRC/CTU/MIX/DVC/CMD/AudioDMAC/AudioDMACpp).
SSI/SRC/CTU/MIX/DVC are implemented as module.
SSI parent, SSIU are implemented as part of SSI
CMD is implemented as part of CTU/MIX/DVC
AudioDMAC/AudioDMACpp are implemented as part of SSI/SRC
It is nice sense that these all devices are implemented as mod.
Current rsnd is controling each mod's status on mod. But it was not
good design for SSI, because stream might has SSI-parent.
In such case, it can't play/capture in same time, because SSI-parent
is used as normal SSI in other stream, but it shares same status.
To avoid this issue each mod's status is controlled by rsnd_dai_stream
instead of rsnd_mod.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Because SRC is connected to DMA and DMA want to keep dreq when stop
timing. This patch makes SRC stop SRC.out only when stop timing. And
it stops both SRC.out/SRC.in when quit timing
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Part of SSI IRQ enable/disable was controlled by SRU (on Gen1)
or CMD (on Gen2). Because of this reason SSI IRQ function was
implemented under src.c. but it is not understandable.
Let's move it to ssi.c
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Renesas sound needs many devices
(SSI/SSIU/SRC/CTU/MIX/DVC/CMD/AudioDMAC/AudioDMACpp).
SSI/SRC/CTU/MIX/DVC are implemented as module.
SSI parent, SSIU are implemented as part of SSI
CMD is implemented as part of CTU/MIX/DVC
AudioDMAC/AudioDMACpp are implemented as part of SSI/SRC
It is nice sense that these all devices are implemented as mod.
Current rsnd_dma_of_path is assuming that all mods are related to DMA.
But it will be wrong. This patch tidyup this wrong assumption
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current Renesas sound is supporting PIO fallback if it can't use DMA.
In such case, it should remove all attached modules, but current driver
is missing about CTU/MIX. Because current implement requests
specific mod for remove.
To avoid same things in future, this patch removes all mods,
and re-connects SSI when PIO fallback case.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Renesas sound needs many devices
(SSI/SSIU/SRC/CTU/MIX/DVC/CMD/AudioDMAC/AudioDMACpp).
SSI/SRC/CTU/MIX/DVC are implemented as module.
SSI parent, SSIU are implemented as part of SSI
CMD is implemented as part of CTU/MIX/DVC
AudioDMAC/AudioDMACpp are implemented as part of SSI/SRC
It is nice sense that these all devices are implemented as mod.
DMAC/SSIU/SSI-parent/CMD will be implemented as module, but these are
not customer controlled module. These should be automatically install
to system. Because of this, rsnd_dai_connect() should be called from
each mod. SSI can be very special, because it will be installed as
SSI-parent / SSI-child. Thus, new rsnd_dai_connect() has type parameter
which should be mod->type except SSI-parent
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Renesas sound needs many devices
(SSI/SSIU/SRC/CTU/MIX/DVC/CMD/AudioDMAC/AudioDMACpp).
SSI/SRC/CTU/MIX/DVC are implemented as module.
SSI parent, SSIU are implemented as part of SSI
CMD is implemented as part of CTU/MIX/DVC
AudioDMAC/AudioDMACpp are implemented as part of SSI/SRC
It is nice sense that these all devices are implemented as mod.
DMA will be implemented as module. Then each rsnd_dma_ops will be
rsnd_mod_ops. But current rsnd_dma_ops::init means "DMA attach".
This patch removes .init from rsnd_dma_ops, and renames
rsnd_dma_init() to rsnd_dma_attach()
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Renesas sound needs many devices
(SSI/SSIU/SRC/CTU/MIX/DVC/CMD/AudioDMAC/AudioDMACpp).
SSI/SRC/CTU/MIX/DVC are implemented as module.
SSI parent, SSIU are implemented as part of SSI
CMD is implemented as part of CTU/MIX/DVC
AudioDMAC/AudioDMACpp are implemented as part of SSI/SRC
It is nice sense that these all devices are implemented as mod.
DMA will be implemented as module. Current DMA definition is no longer
needed on rsnd.h. Let's move it to dma.c
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Renesas sound needs many devices
(SSI/SSIU/SRC/CTU/MIX/DVC/CMD/AudioDMAC/AudioDMACpp).
SSI/SRC/CTU/MIX/DVC are implemented as module.
SSI parent, SSIU are implemented as part of SSI
CMD is implemented as part of CTU/MIX/DVC
AudioDMAC/AudioDMACpp are implemented as part of SSI/SRC
It is nice sense that these all devices are implemented as mod.
Current rsnd_mod is member of rsnd_mod. But the DMA user is only
SSI/SRC. This DMA will be implemented as module. As 1st step, DMA
become SSI/SRC member by this patch.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
SRC In Rate convert feature cannot be used if data path is using DVC.
This patch judges it, and not allowed to use it in such case.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Not much core work here, a few small tweaks to interfaces but mainly the
changes here are driver ones. Highlights include:
- Updates to the topology userspace interface
- Big updates to the Renesas support from Morimoto-san
- Most of the support for Intel Sky Lake systems.
- New drivers for Asahi Kasei Microdevices AK4613, Allwinnner A10,
Cirrus Logic WM8998, Dialog DA7219, Nuvoton NAU8825 and Rockchip
S/PDIF.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJWLbbGAAoJECTWi3JdVIfQH7oH/1VdN2ozP9A03p24aC5qso1F
VWOBnG4pkw1G6J5qK2lemMDeJdRdTfreICUAa9Tw9kOSfTIb6F3X8kCw8tbwlw0I
4phgmyo23P53OfLZFMkQi/RCfwItnE0sszqhvoumUg0ryjYxg2JT+gTMgwvVo7Pq
hf6m6a3we5pxLIIYP4wlQgOKwUJe4B4nC37ExySf24Dlo/DzmWDtfQbGvmyluFzb
MB1qzEvAc/KC3LZFkIFmhfg2/caNRhcQrzkUCYrLR3t+oz9P1zCpYTII7VDdMg7L
SM2VoL+ynEAdBqa38Ozwxvd/mpHwinlAeiikuwz1PyxVOqZvZqqiWzD8eUJkhZk=
=/F/Q
-----END PGP SIGNATURE-----
Merge tag 'asoc-v4.3-rc6' into asoc-fix-rcar
ASoC: Updates for v4.4
Not much core work here, a few small tweaks to interfaces but mainly the
changes here are driver ones. Highlights include:
- Updates to the topology userspace interface
- Big updates to the Renesas support from Morimoto-san
- Most of the support for Intel Sky Lake systems.
- New drivers for Asahi Kasei Microdevices AK4613, Allwinnner A10,
Cirrus Logic WM8998, Dialog DA7219, Nuvoton NAU8825 and Rockchip
S/PDIF.
cfcefe0126 ("ASoC: rsnd: add recovery support for under/over flow
error on SRC") added SCU_SYS_INT_EN1 address, but it should be
0x1d4, not 0x1c4. This patch fixup it.
Fixes: cfcefe0126 ("ASoC: rsnd: add recovery support for under/over flow error on SRC")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
rsnd_ssi_use_busif() and rsnd_ssi_is_pin_sharing() are the function
which returns current SSI status. But these requests duplicated parameter.
This patch removes duplicated parameter.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
rsnd_dma_to_ssi() is no longer used, let's remove it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
rsnd_mod_hw_start/stop were unclear naming.
It became rsnd_mod_power_on/off by this patch
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current rsnd_dai_call returns immediately if rsnd_mod_call return fail.
Thus, each callback-count can be unbalanced for example .init was OK,
start was OK, but, .stop was not OK. This case .quit should be called
but isn't called. And, rsnd_dai_stream_quit() also not be called.
rsnd_dai_call() should call all .stop/.quit eventhough it returns error.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current rsnd_dai_call didn't count callback-count if callback
wasn't implemented. Thus, it counts can be unbalance.
ex) .start : implemented
.stop : not implemented
This patch solve this issue
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Indicating each module method as debug message before executing is
readable/understandable.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
bfc0cfe("ASoC: rsnd: don't use rsnd_mod_to_io() on rsnd_ssi_xxx()")
tidyuped devm_request_irq() option from ssi to mod, but devm_free_irq()
on rsnd_ssi_dma_remove() didn't modified. This patch fixups this issue.
Otherwise kernel will output WARNING message.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
struct rsnd_gen :: res array size should be RSND_BASE_MAX,
not RSND_REG_MAX. This patch fixup it, and indicates whether
each data array size is based on what
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
debug meesage for rsnd_mod_read() should be prints after read
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Probing from Gen1 is not error. This patch fixup it
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Gen1 SRU support was created for preparation of Gen2 SRC support,
but no-one is using this feature (sampling rate convert) on Gen1.
BockW had used SRU before, but it was pass through mode.
This means it is same as SSI. And BockW "platform base" code was
removed from upstream code. It is now supported via DT, but it doesn't
use SRU. More detail, r8a7778.dtsi has "rcar_sound,src" entry, but
no-one is using this feature today. SRU probing has no relation to this
removing. This means there is no effect for DT compatibility, no issues
on upstream kernel.
Gen2 SRC was created from Gen1 SRU, these are similar but not same IP.
Keeping Gen1 SRU in current driver is a little bit difficult,
and no-one is using it today. Gen1 sound is still supported via SSI.
Gen1 SRU support will be removed in the next kernel version.
This patch announces it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Since commit 3d7608e4c1 ("ARM: shmobile: bockw: remove legacy
board file and config"), Renesas R-Car SoCs are only supported in
generic DT-only ARM multi-platform builds. The driver doesn't need to
use platform data anymore, hence remove platform data configuration.
Move <sound/rcar_snd.h> to sound/soc/sh/rcar/, as it's no longer needed
by platform code.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
2a46db4a3("ASoC: rsnd: add AUDIO_CLKOUT support") added AUDIO_CLKOUT
support for ADG. But single AUDIO_CLKOUT needs clkout_name[CLKOUT],
not clkout_name[i]. Kernel will have NULL pointer access without this
patch.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2a46db4a3("ASoC: rsnd: add AUDIO_CLKOUT support") uses
of_clk_add_provider() which is requesting struct clk_onecell_data.
But it is COMMON_CLK feature. SND_SOC_RCAR depends on COMMON_CLK
This patch also solved compile error of 7486d80f7("ASoC: rsnd: remove
unneeded sh_clk header")
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Renesas sound has AUDIO_CLKOUT (in Gen1/Gen2) AUDIO_CLKOUT1/2/3 (in Gen3)
This patch support these patches as clock provider.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
undefined clock is not error. Accept such case. And this is prepare
for clock out support in the same time.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
It didn't have "\n", and indicated different data
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current ADG clock calculation needs ADG and SSI settings.
Thus, SSI side clock request function depends on ADG settings.
After reconsideration, we can close this method inside ADG.
This function uses new method. And it becomes preparation for
AUDIO_CLKOUT support.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ADG is special IP since it doesn't have MSTP. And now, ADG has common
mod base register access. We can now setup ADG initial setting when
probe timing. It is needed if sound card is based on AUIDO_CLK which
is used as Master clock.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Renesas sound has SSI/SRC/DVC/MIX/ADG modules, and these have original
register mapping. Thus this driver is using regmap field, and each module
is using it based on each module ID.
Sometimes, each module needs other module to controlling. but current each
function is using just "mod" as parameter name. This is confusable.
For example, if SSI0 and SRC2 are connected, and if SRC module function
has bug of module access, and if it needs to control connected SSI,
SRC function will access to SSI2 (It should access to SSI0, but it uses
SRC's ID 2). This is easy to happen in current driver style.
To avoid this kind of confusable trouble, this patch adds module confirm
macro for debug purpose.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Renesas sound has ADG IP, but it is special device.
(It is clock generater, and it doesn't need MSTP)
Thus, ADG didn't use mod base common method on rsnd driver.
But it can be confusable point. Let's use common method
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Renesas sound driver has SSI/SRC/DVC/CTU/MIX, and these are controlled
as modules. And these module are member of each modules's private data.
It used own method to get module pointer, but Let's use common method
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Renesas sound Gen3 is updated version of Gen2. We need to update
driver for it, but basically it should works as Gen2 compatible.
This is initial support for Gen3. Gen3 specific feature will be
incrementally added in the future
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
sh_clk header is not needed, and it will create confusion.
Let's remove it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
rsnd_src_pcm_new() is used only from Gen2. make it clear in function name,
and remove unneeded Gen1 check.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
rsnd_dma_to_xxx() macro should exist in same place
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
On arm64:
sound/soc/sh/rcar/dma.c: In function 'rsnd_dmaen_init':
sound/soc/sh/rcar/dma.c:180:9: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
(void *)id);
^
include/linux/dmaengine.h:1185:75: note: in definition of macro 'dma_request_channel'
#define dma_request_channel(mask, x, y) __dma_request_channel(&(mask), x, y)
^
Add an intermediate cast to "uintptr_t" to kill the compile warning.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
rsnd_of_parse_ctu() is not used outside this file so it can be static.
Fixes the following sparse warning:
sound/soc/sh/rcar/ctu.c:72:6: warning: symbol 'rsnd_of_parse_ctu' was
not declared. Should it be static?
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
84e95355602c("ASoC: rsnd: show debug message for SSI/SRC/DVC connection")
added debug message on rsnd_dai_connect(), but the relationship of
parameter check was absurdity. This patch tidyup it.
It is reported via Smatch/Dan
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds CTU (Channel Transfer Unit) support for rsnd driver.
But, it does nothing to data at this point, but is required for MIX
support.
CTU design is a little different from other IPs (CTU0 is including
CTU00 - CTU03, and CTU1 is including CTU10 - CTU13, these have different
register mapping) We need to care about it on this driver.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current rsnd driver is assuming Audio DMAC / Audio DMAC peri peri
are used from SSI/SSIU/SRC/DVC. But we will add CTU/MIX to this driver.
Then, current DMA path searching method is not understandable, and good
enough for this purpose. This patch update DMA path search method, more
simply.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This is cleanup for CTU/MIX support
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Sometimes we would like to get each module directly, especially data path
searching. this patch adds rsnd_io_to_mod() macro, and existing
rsnd_io_to_mod_xxx() use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current rsnd driver is using Audio DMAC (via DMAEngine) and
Audio DMAC peri peri (via original method), and usage of these DMAC
are different. Indicates its naming is useful for debugging.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
DVC doesn't support Gen1, check it beginning of probe
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
rsnd_dma_ops is used only from dma.c, rsnd.h doesn't need it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
It can help for connection debug
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Sound L/R order of SSI is different from Linux sound data order.
So current rsnd driver is using DALIGN (= data align) to exchange data
align on SSIU. OTOH, CMD/SRC/SSIU have DALIGN register. Now inverted
sound volume will be exchanged if user used volume control on DVC.
Because SSIU which exchanges data align is located after DVC.
MEM -> SRC -> DVC -> SSI
This patch exchanges data align SRC if possible
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current rsnd driver has rsnd_get_adinr_bit() to get bit settings for
ADINR (= Audio Information Register) of SSIU/SRC/DVC.
This patch adds rsnd_get_adinr_chan() to get channel settings for
ADINR (= Audio Information Register) of CTU/MIX.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Renesas sound IP (= SSIU/SRC/CTU/MIX/DVC) have ADINR
(= Audio Information Register), but some of them (= SSIU/SRC/DVC)
are for audio data bits, some of them (= CTU/MIX) are for audio data
channels.
Current rsnd driver is supporting SSIU/SRC/DVC, and these ADINR were
for bits. This patch rename rsnd_get_adinr() to rsnd_get_adinr_bit(),
and we will have rsnd_get_adinr_chan() for CTU/MIX.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Renesas SCU (Sampling Rate Convert Unit) includes SRC/CTU/MIX/DVC,
and these have similar register. xxxIR (Initialization Register) is one
of them. These xxxIR need be set to 1 during initialization.
Current rsnd driver has src.c / dvc.c, and we will have mix.c.
It is readable if these have same named function.
This patch adds rsnd_src_initialize_lock/unlock() and make sure it
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Renesas SCU (Sampling Rate Convert Unit) includes SRC/CTU/MIX/DVC,
and these have similar register. xxxIR (Initialization Register) is one
of them. These xxxIR need be set to 1 during initialization.
Current rsnd driver has src.c / dvc.c, and we will have mix.c.
It is readable if these have same named function.
This patch adds rsnd_dvc_initialize_lock/unlock() and make sure it
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current sound data route settings is done in dvc.c, and it doesn't care
about CTU/MIX at this poinnt, but we need to care about these.
OTOH, rsnd driver already has rsnd_path_xxx() functions for data path which
are good match for CTU/MIX/DVC path selectio.
This patch adds new rsnd_path_parse() to select sound data route which will
care about CTU/MIX/DVC path.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
parse/break is a little ambiguous/confusable name for rsnd module path.
Especially for CTU/MIX support. It was renamed to add/remove
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Renesas SCU (Sampling Rate Convert Unit) includes SRC/CTU/MIX/DVC,
and these have similar register. xxxRSR (Software reset Register) is one
of them. These xxxRSR need be set to 1 to 0 when software reset.
Current rsnd driver has src.c / dvc.c, and we will have mix.c.
It is readable if these have same named function.
This patch adds rsnd_src_soft_reset() and make sure it
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Renesas SCU (Sampling Rate Convert Unit) includes SRC/CTU/MIX/DVC,
and these have similar register. xxxRSR (Software reset Register) is one
of them. These xxxRSR need be set to 1 to 0 when software reset.
Current rsnd driver has src.c / dvc.c, and we will have mix.c.
It is readable if these have same named function.
This patch adds rsnd_dvc_soft_reset() and make sure it
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
rsnd_src_nr() is used only from src.c
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
rsnd_dvc_nr() is used only from dvc.c
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
enabling to use same method for exception case is useful.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
We couldn't use SRC sync convert mode together with DVC,
but we can use workaround for it.
This patch adds workaround and can use SRC sync convert + DVC
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
'5451ea443b ("ASoC: rsnd: count each mod (SSI/SRC/DVC)")' counts each
module's callback status, but counts 1st callback only.
This patch fixup it. Otherwise, multi-called function will be trouble
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
based on datasheet
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
based on datasheet
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current checkpatch.pl indicates 'out of memory' message is unnecessary.
Let's remove it
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current checkpatch.pl indicates 'out of memory' message is unnecessary.
Let's remove it
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current checkpatch.pl indicates 'out of memory' message is unnecessary.
Let's remove it
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
using common audio routing path method makes sense.
Let's use snd_soc_of_parse_audio_route/prefix.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Since the removal of the r8a7740 legacy board code in commit
1fa59bda21 ("ARM: shmobile: Remove legacy board code for
Armadillo-800 EVA"), all former users of the "sh_fsi2" platform device
name are only supported in generic DT-only ARM multi-platform builds.
The driver doesn't need to match platform devices by name anymore, hence
remove the corresponding platform_device_id entry.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
rsnd_force_write() is similar to rsnd_write(),
but rsnd_force_write() write data to register even though
it is same value.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
It was a busy development cycle at this time, as you can see a wide
range of changes in diffstat. There are no big changes but many
refactoring and improvements. Here we go some highlights:
* ALSA core:
- Procfs codes were cleaned up to use seq_file
- Procfs can be opt out via Kconfig (only for EXPERT)
- Two types of jack API were unified finally; now both kctl and input
jack devs are handled via a single function call.
* HD-audio
- Continued code restructuring for the future ASoC driver; now HDA
controller driver is split to a core helper module.
- Preliminary codes for Skylake audio support in HDA core.
- Proper i915 gfx power well management for SKL & co
- Enabled runtime PM as default for Intel HDMI/DP codecs
- Newer Tegra chip supports
- More quirks for Dell headsets, Alienware (with CA0132), etc.
- A couple of DRM ELD helper API functions
* ASoC
- Support for loading ASoC topology maps from firmware, intended to be
used to allow self-describing DSP firmware images to be built which
can map controls added by the DSP to userspace without the kernel
needing to know about individual DSP firmwares
- Lots of refactoring to avoid direct access to snd_soc_codec where
it's not needed supporting future refactoring
- Big refactoring, cleanup and enhancement for the Wolfson ADSP driver
- Cleanup series for TI TAS2552 and R-CAR drivers
- Fixes and improvements on RT56xx codecs
- Support for TI TAS571x power amplifiers
- Support for Qualcomm APQ8016 and ZTE ZX296702 SoCs
- Support for x86 systems with RT5650 and Qualcomm Storm
- Support for Mediatek AFE (Audio Front End) unit
- Other various small fixes to ASoC codec drivers
* Firewire
- Enhanced to allow non-blocking streams to use timestamp
synchronization
- Improve support for DM1500 and BeBoBv3
* Misc
- Cleanup of old pci API functions over all PCI sound drivers
- Fix long-standing regression of the old powermac i2c setup
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=D78E
-----END PGP SIGNATURE-----
Merge tag 'sound-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"It was a busy development cycle at this time, as you can see a wide
range of changes in diffstat. There are no big changes but many
refactoring and improvements. Here we go some highlights:
ALSA core:
- Procfs codes were cleaned up to use seq_file
- Procfs can be opt out via Kconfig (only for EXPERT)
- Two types of jack API were unified finally; now both kctl and input
jack devs are handled via a single function call.
HD-audio:
- Continued code restructuring for the future ASoC driver; now HDA
controller driver is split to a core helper module.
- Preliminary codes for Skylake audio support in HDA core.
- Proper i915 gfx power well management for SKL & co
- Enabled runtime PM as default for Intel HDMI/DP codecs
- Newer Tegra chip supports
- More quirks for Dell headsets, Alienware (with CA0132), etc.
- A couple of DRM ELD helper API functions
ASoC:
- Support for loading ASoC topology maps from firmware, intended to
be used to allow self-describing DSP firmware images to be built
which can map controls added by the DSP to userspace without the
kernel needing to know about individual DSP firmwares
- Lots of refactoring to avoid direct access to snd_soc_codec where
it's not needed supporting future refactoring
- Big refactoring, cleanup and enhancement for the Wolfson ADSP
driver
- Cleanup series for TI TAS2552 and R-CAR drivers
- Fixes and improvements on RT56xx codecs
- Support for TI TAS571x power amplifiers
- Support for Qualcomm APQ8016 and ZTE ZX296702 SoCs
- Support for x86 systems with RT5650 and Qualcomm Storm
- Support for Mediatek AFE (Audio Front End) unit
- Other various small fixes to ASoC codec drivers
Firewire:
- Enhanced to allow non-blocking streams to use timestamp
synchronization
- Improve support for DM1500 and BeBoBv3
Misc:
- Cleanup of old pci API functions over all PCI sound drivers
- Fix long-standing regression of the old powermac i2c setup"
* tag 'sound-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (533 commits)
ALSA: pcm: Fix pcm_class sysfs output
ALSA: hda-beep: Update authors dead email address
ASoC: wm_adsp: Move DSP Rate controls into the codec
ASoC: wm8995: Fix setting sysclk for WM8995_SYSCLK_MCLK2 case
ALSA: hda: provide default bus io ops extended hdac
ALSA: hda: add hda link cleanup routine
ALSA: hda: add hdac_ext stream creation and cleanup routines
ASoC: rsrc-card: remove unused ret
ALSA: HDAC: move SND_HDA_PREALLOC_SIZE to core
ASoC: mediatek: Add machine driver for rt5650 rt5676 codec
ASoC: mediatek: Add machine driver for MAX98090 codec
ASoC: mediatek: Add AFE platform driver
ASoC: rsnd: remove io from rsnd_mod
ASoC: rsnd: move rsnd_mod_is_working() to rsnd_io_is_working()
ASoC: rsnd: don't use rsnd_mod_to_io() on snd_kcontrol
ASoC: rsnd: don't use rsnd_mod_to_io() on rsnd_src_xxx()
ASoC: rsnd: don't use rsnd_mod_to_io() on rsnd_ssi_xxx()
ASoC: rsnd: don't use rsnd_mod_to_io() on rsnd_dma_xxx()
ASoC: rsnd: don't use rsnd_mod_to_io() on rsnd_get_adinr()
ASoC: rsnd: add common interrupt handler for SSI/SRC/DMA
...
Pull clkdev updates from Russell King:
"This series addresses some breakage in clkdev caused by a previous
patch set from the clk tree which introduced per-user clk structures.
This basically renamed the existing 'struct clk' to 'struct clk_hw',
and introduced a new 'struct clk'.
This change will break anyone using clk_add_alias() with the common
clk code enabled. Thankfully, the intersection of users of
clk_add_alias() and those using the common clk code is practically
zero, but this is something which should be fixed to keep the code
sane.
The problem is that clk_add_alias() does this:
r = clk_get(...);
l = clkdev_alloc(r, ...);
clk_put(...);
which causes the alias to store a pointer to 'r', which has been
freed.
The original patch set tried to work around this problem incorrectly -
at clk_get() time, it tried to convert the struct clk to a struct
clk_hw, and then creating a new struct clk from that. Clearly, if the
original struct clk has been freed, then we have a use-after-free bug.
We have other places in the tree which do something similar, so this
series also addresses those locations too.
This series addresses this problem by converting clkdev to store and
use the clk_hw pointer. This allows clk_get() to only have to create
it's per-user struct clk from the clk_hw. We can also get to the
desired clk_hw at clk_add_alias() or clk lookup creation time, when
the struct clk is "alive".
We also perform some cleanups of the code:
- replacing looped calls to clkdev_add() with clkdev_add_table()
- replacing open-coded lookup allocation (which should have been
using clkdev_alloc()) and subsequent clkdev_add() with
clkdev_create()
- replacing open-coded clk_add_alias() with clk_add_alias()"
* 'for-linus-clk' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
clk: s2mps11: use clkdev_create()
ASoC: migor: use clkdev_create()
ARM: omap2: use clkdev_add_alias()
ARM: omap2: use clkdev_create()
ARM: orion: use clkdev_create()
ARM: lpc32xx: convert to use clkdev_add_table()
SH: use clkdev_add_table()
clkdev: add clkdev_create() helper
clkdev: const-ify connection id to clk_add_alias()
clkdev: get rid of redundant clk_add_alias() prototype in linux/clk.h
clkdev: drop __init from clkdev_add_table()
clk: update clk API documentation to clarify clk_round_rate()
clkdev: use clk_hw internally
'047000278da3a17f8("ASoC: rsrc-card: cleanup for DPCM")'
cleanuped rsrc-card driver, but then, unused ret was left.
Below warning happen without this patch
${LINUX}/sound/soc/sh/rcar/rsrc-card.c: In function 'rsrc_card_startup':
${LINUX}/sound/soc/sh/rcar/rsrc-card.c:78:6: warning: unused variable \
'ret' [-Wunused-variable]
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Each Renesas sound mod (= SSI/SRC/DVC) might be called from many path
if it supports MIXer. In such case, mod <-> io is no longer 1:1
relationship. rsnd_mod_to_io() is no longer needed. Let's remove it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Each Renesas sound mod (= SSI/SRC/DVC) might be called from many paths
if it supports MIXer. In such case, mod <-> io is no longer 1:1
relationship.
This patch checks module working status via io instead of mod
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Each Renesas sound mod (= SSI/SRC/DVC) might be called from many paths
if it supports MIXer. In such case, mod <-> io is no longer 1:1
relationship. This patch removes rsnd_mod_to_io() from snd_kcontrol
and related function.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Each Renesas sound mod (= SSI/SRC/DVC) might be called from many paths
if it supports MIXer. In such case, mod <-> io is no longer 1:1
relationship. This patch removes rsnd_mod_to_io() from rsnd_src_xxx()
and related function.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Each Renesas sound mod (= SSI/SRC/DVC) might be called from many paths
if it supports MIXer. In such case, mod <-> io is no longer 1:1
relationship. This patch removes rsnd_mod_to_io() from rsnd_ssi_xxx()
and related function.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Each Renesas sound mod (= SSI/SRC/DVC) might be called from many paths
if it supports MIXer. In such case, mod <-> io is no longer 1:1
relationship. This patch removes rsnd_mod_to_io() from rsnd_dma_xxx()
and related function
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Each Renesas sound mod (= SSI/SRC/DVC) might be called from many paths
if it supports MIXer. In such case, mod <-> io is no longer 1:1
relationship. This patch removes rsnd_mod_to_io() from rsnd_get_adinr()
and its related function
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Each Renesas sound mod (= SSI/SRC/DVC) might be called from many paths
if it supports MIXer. In such case, mod <-> io is no longer 1:1
relationship. Then, interrupt handler can't use rsnd_mod_to_io().
This patch adds SSI/SRC/DMA common interrupt handler frame
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Each Renesas sound mod (= SSI/SRC/DVC) might be called from many paths
if it supports MIXer. In such case, mod <-> io is no longer 1:1
relationship. This means we can't call rsnd_mod_to_io() any more.
This patch adds struct rsnd_dai_stream to each function as parameter.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Each Renesas sound mod (= SSI/SRC/DVC) might be called from many paths
if it supports MIXer. In such case, mod <-> io is no longer 1:1
relationship. This means we can't use rsnd_mod_to_io() in SSI/SRC/DMA
interrupt handler. In such case, we need to check all io in interrupt
handler, and then, "priv" is needed.
This patch adds rsnd_priv pointer in rsnd_mod for prepare it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Each Renesas sound mod (= SSI/SRC/DVC) might be called from many paths
if it supports MIXer. Then, we don't need to re-call each mod function
that had been called. This patch count each mod status.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
rsrc-card driver is based on simple-card driver which is caring about
CPU / Codec connection. OTOH, rsrc-card is used for DPCM system.
FE portion is constituted by CPU and dummy Codec, and BE is constituted
by dummy CPU and Codec in DPCM system.
Because of this, current rsrc-card is doing pointless method. It works well
if FE/BE was 1:1, but not good for multi FE/BE.
This patch cleanups rsrc-card driver for DPCM. and this is prepare for
MIX support for Renesas sound driver.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This is prepare for DPCM cleanup
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current rsrc-card is assuming 1 FE (= CPU), 1 BE (= codec) on card.
But, it will support multi FE/BE card. This is prepare for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current dai_link name is using "cpu_dai_name + codec_dai_name",
but one of them is always "snd-soc-dummy-dai" when DPCM.
This patch uses "fe.xxx" for cpu, "be.xxx" for codec.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
'a9e1ac1a9e4585b5("ASoC: rsnd: spin lock for interrupt handler")'
added spin lock under interrupt handler to solve HW restart issue.
OTOH, current rsnd driver calls snd_pcm_period_elapsed() from
rsnd_dai_pointer_update(). but, it will be called under spin lock
if SSI was PIO mode.
If it was called under spin lock, it will call
snd_pcm_update_state() -> snd_pcm_drain_done().
Then, it calls rsnd_soc_dai_trigger() and will be dead-lock.
This patch doesn't call rsnd_dai_pointer_update() under spin lock
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
PIO is used only for checking data path / codec settings. And underrun
is very normal when PIO mode. Let's don't care about under/over run
error when PIO case. Otherwise, 1) too many HW restart happens, 2) some
sounds which need much data transfer can't play since it falls into
error detection method which was created for DMA transfer
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current Renesas R-Car sound driver calls rsnd_dai_stream_init() when
start, but it didn't call paired function. This patch adds
rsnd_dai_stream_quit() for it. This is prepare for interrupt error
status check feature support.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Tested by: Cao Minh Hiep <cm-hiep@jinso.co.jp>
Signed-off-by: Mark Brown <broonie@kernel.org>
rsnd_ssi_hw_stop() should be called after rsnd_ssi_hw_start().
This patch indicates unknown hw_stop as error
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Tested by: Cao Minh Hiep <cm-hiep@jinso.co.jp>
Signed-off-by: Mark Brown <broonie@kernel.org>
This reverts commit 'e9c390df671f ("ASoC: rsnd: make sure it uses lock when
it calls rsnd_dai_call)' The additional locks make 1") lock issue when boot
2) lock issue when unbind/rmmod. And there is no problem without these
locks. This patch revert it.
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
clkdev_create() is a shorter way to write clkdev_alloc() followed by
clkdev_add(). Use this instead.
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
rsnd might be used in multi-codec sound card.
Then, same name kcontrol will be registered many times, and it will
be error. This patch fixes this issue by using .index
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
SSI parent/child need to use same number of sound data channel
if these are sharing clock/ws pin. this patch makes it sure.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current rsnd driver is using SSI parent related function/macro as
"clock" related. but it is not only clock related.
tidyup function/macro naming.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
rsnd_dai_call() should be called under rsnd_lock
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Using standardized function/macro name is useful in driver
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
rsnd_dmaen_quit() is assuming dmaen->chan is NULL if it failed
to get DMAEngine channel. but, current dmaen->chan might have
error value when error case (this driver is checking it by IS_ERR_OR_NULL())
This patch makes sure dmaen->chan is NULL when error case.
Otherwise, it will contact to unknown address in rsnd_dmaen_quit()
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The r-car sound driver only works when CONFIG_OF is set, and
after a recent change has a compile-time dependency as well:
sound/built-in.o: In function `rsnd_dma_request_channel':
:(.text+0x9fb84): undefined reference to `of_dma_request_slave_channel'
This could be fixed either by adding a static inline wrapper
for the function, or by adding a Kconfig dependency. This
implements the second approach, which seems appropriate
because the driver in fact has a hard dependency.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 72adc61f46 ("ASoC: rsnd: 1st DMAC dma-names cares subnode")
Signed-off-by: Mark Brown <broonie@kernel.org>
Renesas R-Car sound SRC (= Sampling Rate Converter) has
Asynchronous/Synchronous SRC mode. Asynchronous mode is already
supported via DPCM. This patch adds Synchronous mode on it.
The condition of enabling Synchronous mode are
- SoC is clock master
- Sound uses SRC
- Sound doesn't use DVC
- Sound card uses DPCM (= rsrc-card card)
amixer set "SRC Out Rate" on
aplay xxx.wav &
amixer set "SRC Out Rate" 48000
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
A driver's device data should and can be const. This is a follow-up on
commit 33187fb4a2 (ASoC: rsnd: constify of_device_id array) which
marked the of_device_id as const.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
A driver's platform_device_id and device data should and can be const.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
According to the file header only GPL v2 applies to it. Fix the
MODULE_LICENSE parameter accordingly.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch supports DPCM based sampling rate convert on Renesas sound
driver. It assumes...
1. SRC is implemented as FE
2. BE dai_link supports .be_hw_params_fixup
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch removes useless debug message. especially some kind of
"probed" message will be printed from core.c if it has #define DEBUG
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
clk_prepare_enable()/clk_disable_unprepare() uses mutex inside,
in concretely clk_prepare()/clk_unprepare().And it uses __schedule().
Then, raw_spin_lock/unlock_irq() is called, and it breaks Renesas
sound driver's spin lock irq.
This patch separates thesse into clk_prepare()/clk_unprepare() and
clk_enable/clk_disable. And call clk_prepare()/clk_unprepare() from
probe/remove function. Special thanks to Das Biju.
Reported-by: Das Biju <biju.das@bp.renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current rsnd-dpcm-card is supporting DPCM FE/BE sound card.
This patch adds .be_hw_params_fixup and enabled sampling convert rate.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Renesas sound card has "sampling rate convert" feature which
should be implemented via DPCM.
But, sound card driver point of view, it is difficult to add
this DPCM feature on simple-card driver. Especially, DT binding
support is very difficult.
This patch implements DPCM feature on DT as Renesas specific sound card.
This new driver is copied from current simple-card driver.
Main difference between simple-card and this driver are...
1. removed unused feature from simple-card
2. removed driver named prefix from DT property
3. CPU will be FE, CODEC will be BE with snd-soc-dummy
4. it supports sampling rate convert via .be_hw_params_fixup
5. board specific routing is implemented in driver
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace duplicated const keyword for 'dvc_ramp_rate' with proper
array of const pointers to const strings.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds missing dai_link stream_name
which is used when DPCM
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver sometimes fixups debug/error message format
30cc4faf70
(ASoC: rsnd: tidyup debug message format and timing)
337b0b4c5f
(ASoC: rsnd: error meesage indicates its port)
But, it still exist un-fomated error message. This patch fixup it
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
It will be SRC interrupt endless loop f unusual situation happen.
This patch adds restart limit for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
It will be SSI interrupt endless loop f unusual situation happen.
This patch adds restart limit for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
