Detected by LGTM static analyze in Github repo, fix potential multiplication
overflow before result is casted to size_t.
Fixes: 8505e8709b ("libbpf: Implement generalized .BTF.ext func/line info adjustment")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200904041611.1695163-2-andriin@fb.com
Another issue of __u64 needing either %lu or %llu, depending on the
architecture. Fix with cast to `unsigned long long`.
Fixes: 7e06aad529 ("libbpf: Add multi-prog section support for struct_ops")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200904041611.1695163-1-andriin@fb.com
BPF program title is ambigious and misleading term. It is ELF section name, so
let's just call it that and deprecate bpf_program__title() API in favor of
bpf_program__section_name().
Additionally, using bpf_object__find_program_by_title() is now inherently
dangerous and ambiguous, as multiple BPF program can have the same section
name. So deprecate this API as well and recommend to switch to non-ambiguous
bpf_object__find_program_by_name().
Internally, clean up usage and mis-usage of BPF program section name for
denoting BPF program name. Shorten the field name to prog->sec_name to be
consistent with all other prog->sec_* variables.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200903203542.15944-11-andriin@fb.com
Complete multi-prog sections and multi sub-prog support in libbpf by properly
adjusting .BTF.ext's line and function information. Mark exposed
btf_ext__reloc_func_info() and btf_ext__reloc_func_info() APIs as deprecated.
These APIs have simplistic assumption that all sub-programs are going to be
appended to all main BPF programs, which doesn't hold in real life. It's
unlikely there are any users of this API, as it's very libbpf
internals-specific.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200903203542.15944-6-andriin@fb.com
This patch implements general and correct logic for bpf-to-bpf sub-program
calls. Only sub-programs used (called into) from entry-point (main) BPF
program are going to be appended at the end of main BPF program. This ensures
that BPF verifier won't encounter any dead code due to copying unreferenced
sub-program. This change means that each entry-point (main) BPF program might
have a different set of sub-programs appended to it and potentially in
different order. This has implications on how sub-program call relocations
need to be handled, described below.
All relocations are now split into two categores: data references (maps and
global variables) and code references (sub-program calls). This distinction is
important because data references need to be relocated just once per each BPF
program and sub-program. These relocation are agnostic to instruction
locations, because they are not code-relative and they are relocating against
static targets (maps, variables with fixes offsets, etc).
Sub-program RELO_CALL relocations, on the other hand, are highly-dependent on
code position, because they are recorded as instruction-relative offset. So
BPF sub-programs (those that do calls into other sub-programs) can't be
relocated once, they need to be relocated each time such a sub-program is
appended at the end of the main entry-point BPF program. As mentioned above,
each main BPF program might have different subset and differen order of
sub-programs, so call relocations can't be done just once. Splitting data
reference and calls relocations as described above allows to do this
efficiently and cleanly.
bpf_object__find_program_by_name() will now ignore non-entry BPF programs.
Previously one could have looked up '.text' fake BPF program, but the
existence of such BPF program was always an implementation detail and you
can't do much useful with it. Now, though, all non-entry sub-programs get
their own BPF program with name corresponding to a function name, so there is
no more '.text' name for BPF program. This means there is no regression,
effectively, w.r.t. API behavior. But this is important aspect to highlight,
because it's going to be critical once libbpf implements static linking of BPF
programs. Non-entry static BPF programs will be allowed to have conflicting
names, but global and main-entry BPF program names should be unique. Just like
with normal user-space linking process. So it's important to restrict this
aspect right now, keep static and non-entry functions as internal
implementation details, and not have to deal with regressions in behavior
later.
This patch leaves .BTF.ext adjustment as is until next patch.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200903203542.15944-5-andriin@fb.com
Fix up CO-RE relocation code to handle relocations against ELF sections
containing multiple BPF programs. This requires lookup of a BPF program by its
section name and instruction index it contains. While it could have been done
as a simple loop, it could run into performance issues pretty quickly, as
number of CO-RE relocations can be quite large in real-world applications, and
each CO-RE relocation incurs BPF program look up now. So instead of simple
loop, implement a binary search by section name + insn offset.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200903203542.15944-4-andriin@fb.com
Teach libbpf how to parse code sections into potentially multiple bpf_program
instances, based on ELF FUNC symbols. Each BPF program will keep track of its
position within containing ELF section for translating section instruction
offsets into program instruction offsets: regardless of BPF program's location
in ELF section, it's first instruction is always at local instruction offset
0, so when libbpf is working with relocations (which use section-based
instruction offsets) this is critical to make proper translations.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200903203542.15944-3-andriin@fb.com
libbpf ELF parsing logic might need symbols available before ELF parsing is
completed, so we need to make sure that symbols table section is found in
a separate pass before all the subsequent sections are processed.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200903203542.15944-2-andriin@fb.com
Daniel Borkmann says:
====================
pull-request: bpf-next 2020-09-01
The following pull-request contains BPF updates for your *net-next* tree.
There are two small conflicts when pulling, resolve as follows:
1) Merge conflict in tools/lib/bpf/libbpf.c between 88a8212028 ("libbpf: Factor
out common ELF operations and improve logging") in bpf-next and 1e891e513e
("libbpf: Fix map index used in error message") in net-next. Resolve by taking
the hunk in bpf-next:
[...]
scn = elf_sec_by_idx(obj, obj->efile.btf_maps_shndx);
data = elf_sec_data(obj, scn);
if (!scn || !data) {
pr_warn("elf: failed to get %s map definitions for %s\n",
MAPS_ELF_SEC, obj->path);
return -EINVAL;
}
[...]
2) Merge conflict in drivers/net/ethernet/mellanox/mlx5/core/en/xsk/rx.c between
9647c57b11 ("xsk: i40e: ice: ixgbe: mlx5: Test for dma_need_sync earlier for
better performance") in bpf-next and e20f0dbf20 ("net/mlx5e: RX, Add a prefetch
command for small L1_CACHE_BYTES") in net-next. Resolve the two locations by retaining
net_prefetch() and taking xsk_buff_dma_sync_for_cpu() from bpf-next. Should look like:
[...]
xdp_set_data_meta_invalid(xdp);
xsk_buff_dma_sync_for_cpu(xdp, rq->xsk_pool);
net_prefetch(xdp->data);
[...]
We've added 133 non-merge commits during the last 14 day(s) which contain
a total of 246 files changed, 13832 insertions(+), 3105 deletions(-).
The main changes are:
1) Initial support for sleepable BPF programs along with bpf_copy_from_user() helper
for tracing to reliably access user memory, from Alexei Starovoitov.
2) Add BPF infra for writing and parsing TCP header options, from Martin KaFai Lau.
3) bpf_d_path() helper for returning full path for given 'struct path', from Jiri Olsa.
4) AF_XDP support for shared umems between devices and queues, from Magnus Karlsson.
5) Initial prep work for full BPF-to-BPF call support in libbpf, from Andrii Nakryiko.
6) Generalize bpf_sk_storage map & add local storage for inodes, from KP Singh.
7) Implement sockmap/hash updates from BPF context, from Lorenz Bauer.
8) BPF xor verification for scalar types & add BPF link iterator, from Yonghong Song.
9) Use target's prog type for BPF_PROG_TYPE_EXT prog verification, from Udip Pant.
10) Rework BPF tracing samples to use libbpf loader, from Daniel T. Lee.
11) Fix xdpsock sample to really cycle through all buffers, from Weqaar Janjua.
12) Improve type safety for tun/veth XDP frame handling, from Maciej Żenczykowski.
13) Various smaller cleanups and improvements all over the place.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for shared umems between hardware queues and devices to
the AF_XDP part of libbpf. This so that zero-copy can be achieved in
applications that want to send and receive packets between HW queues
on one device or between different devices/netdevs.
In order to create sockets that share a umem between hardware queues
and devices, a new function has been added called
xsk_socket__create_shared(). It takes the same arguments as
xsk_socket_create() plus references to a fill ring and a completion
ring. So for every socket that share a umem, you need to have one more
set of fill and completion rings. This in order to maintain the
single-producer single-consumer semantics of the rings.
You can create all the sockets via the new xsk_socket__create_shared()
call, or create the first one with xsk_socket__create() and the rest
with xsk_socket__create_shared(). Both methods work.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/1598603189-32145-14-git-send-email-magnus.karlsson@intel.com
Pass request to load program as sleepable via ".s" suffix in the section name.
If it happens in the future that all map types and helpers are allowed with
BPF_F_SLEEPABLE flag "fmod_ret/" and "lsm/" can be aliased to "fmod_ret.s/" and
"lsm.s/" to make all lsm and fmod_ret programs sleepable by default. The fentry
and fexit programs would always need to have sleepable vs non-sleepable
distinction, since not all fentry/fexit progs will be attached to sleepable
kernel functions.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: KP Singh <kpsingh@google.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200827220114.69225-5-alexei.starovoitov@gmail.com
The system for "Auto-detecting system features" located under
tools/build/ are (currently) used by perf, libbpf and bpftool. It can
contain stalled feature detection files, which are not cleaned up by
libbpf and bpftool on make clean (side-note: perf tool is correct).
Fix this by making the users invoke the make clean target.
Some details about the changes. The libbpf Makefile already had a
clean-config target (which seems to be copy-pasted from perf), but this
target was not "connected" (a make dependency) to clean target. Choose
not to rename target as someone might be using it. Did change the output
from "CLEAN config" to "CLEAN feature-detect", to make it more clear
what happens.
This is related to the complaint and troubleshooting in the following
link: https://lore.kernel.org/lkml/20200818122007.2d1cfe2d@carbon/
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/lkml/20200818122007.2d1cfe2d@carbon/
Link: https://lore.kernel.org/bpf/159851841661.1072907.13770213104521805592.stgit@firesoul
Fix compilation warnings due to __u64 defined differently as `unsigned long`
or `unsigned long long` on different architectures (e.g., ppc64le differs from
x86-64). Also cast one argument to size_t to fix printf warning of similar
nature.
Fixes: eacaaed784 ("libbpf: Implement enum value-based CO-RE relocations")
Fixes: 50e09460d9 ("libbpf: Skip well-known ELF sections when iterating ELF")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200827041109.3613090-1-andriin@fb.com
There are code paths where EINVAL is returned directly without setting
errno. In that case, errno could be 0, which would mask the
failure. For example, if a careless programmer set log_level to 10000
out of laziness, they would have to spend a long time trying to figure
out why.
Fixes: 4f33ddb4e3 ("libbpf: Propagate EPERM to caller on program load")
Signed-off-by: Alex Gartrell <alexgartrell@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200826075549.1858580-1-alexgartrell@gmail.com
Similar to bpf_local_storage for sockets, add local storage for inodes.
The life-cycle of storage is managed with the life-cycle of the inode.
i.e. the storage is destroyed along with the owning inode.
The BPF LSM allocates an __rcu pointer to the bpf_local_storage in the
security blob which are now stackable and can co-exist with other LSMs.
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200825182919.1118197-6-kpsingh@chromium.org
Fix copy-paste error in types compatibility check. Local type is accidentally
used instead of target type for the very first type check strictness check.
This can result in potentially less strict candidate comparison. Fix the
error.
Fixes: 3fc32f40c4 ("libbpf: Implement type-based CO-RE relocations support")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200821225653.2180782-1-andriin@fb.com
Make libbpf logs follow similar pattern and provide more context like section
name or program name, where appropriate. Also, add BPF_INSN_SZ constant and
use it throughout to clean up code a little bit. This commit doesn't have any
functional changes and just removes some code changes out of the way before
bigger refactoring in libbpf internals.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200820231250.1293069-6-andriin@fb.com
Skip and don't log ELF sections that libbpf knows about and ignores during ELF
processing. This allows to not unnecessarily log details about those ELF
sections and cleans up libbpf debug log. Ignored sections include DWARF data,
string table, empty .text section and few special (e.g., .llvm_addrsig)
useless sections.
With such ELF sections out of the way, log unrecognized ELF sections at
pr_info level to increase visibility.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200820231250.1293069-5-andriin@fb.com
__noinline is pretty frequently used, especially with BPF subprograms, so add
them along the __always_inline, for user convenience and completeness.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200820231250.1293069-4-andriin@fb.com
Factor out common ELF operations done throughout the libbpf. This simplifies
usage across multiple places in libbpf, as well as hide error reporting from
higher-level functions and make error logging more consistent.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200820231250.1293069-3-andriin@fb.com
Add a set of APIs to perf_buffer manage to allow applications to integrate
perf buffer polling into existing epoll-based infrastructure. One example is
applications using libevent already and wanting to plug perf_buffer polling,
instead of relying on perf_buffer__poll() and waste an extra thread to do it.
But perf_buffer is still extremely useful to set up and consume perf buffer
rings even for such use cases.
So to accomodate such new use cases, add three new APIs:
- perf_buffer__buffer_cnt() returns number of per-CPU buffers maintained by
given instance of perf_buffer manager;
- perf_buffer__buffer_fd() returns FD of perf_event corresponding to
a specified per-CPU buffer; this FD is then polled independently;
- perf_buffer__consume_buffer() consumes data from single per-CPU buffer,
identified by its slot index.
To support a simpler, but less efficient, way to integrate perf_buffer into
external polling logic, also expose underlying epoll FD through
perf_buffer__epoll_fd() API. It will need to be followed by
perf_buffer__poll(), wasting extra syscall, or perf_buffer__consume(), wasting
CPU to iterate buffers with no data. But could be simpler and more convenient
for some cases.
These APIs allow for great flexiblity, but do not sacrifice general usability
of perf_buffer.
Also exercise and check new APIs in perf_buffer selftest.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/20200821165927.849538-1-andriin@fb.com
Alexei Starovoitov says:
====================
pull-request: bpf 2020-08-21
The following pull-request contains BPF updates for your *net* tree.
We've added 11 non-merge commits during the last 5 day(s) which contain
a total of 12 files changed, 78 insertions(+), 24 deletions(-).
The main changes are:
1) three fixes in BPF task iterator logic, from Yonghong.
2) fix for compressed dwarf sections in vmlinux, from Jiri.
3) fix xdp attach regression, from Andrii.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
GCC compilers older than version 5 don't support __builtin_mul_overflow yet.
Given GCC 4.9 is the minimal supported compiler for building kernel and the
fact that libbpf is a dependency of resolve_btfids, which is dependency of
CONFIG_DEBUG_INFO_BTF=y, this needs to be handled. This patch fixes the issue
by falling back to slower detection of integer overflow in such cases.
Fixes: 029258d7b2 ("libbpf: Remove any use of reallocarray() in libbpf")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200820061411.1755905-2-andriin@fb.com
BPF_CALL | BPF_JMP32 is explicitly not allowed by verifier for BPF helper
calls, so don't detect it as a valid call. Also drop the check on func_id
pointer, as it's currently always non-null.
Fixes: 109cea5a59 ("libbpf: Sanitize BPF program code for bpf_probe_read_{kernel, user}[_str]")
Reported-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200820061411.1755905-1-andriin@fb.com
The error message emitted by bpf_object__init_user_btf_maps() was using the
wrong section ID.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200819110534.9058-1-toke@redhat.com
Add kernel module with user mode driver that populates bpffs with
BPF iterators.
$ mount bpffs /my/bpffs/ -t bpf
$ ls -la /my/bpffs/
total 4
drwxrwxrwt 2 root root 0 Jul 2 00:27 .
drwxr-xr-x 19 root root 4096 Jul 2 00:09 ..
-rw------- 1 root root 0 Jul 2 00:27 maps.debug
-rw------- 1 root root 0 Jul 2 00:27 progs.debug
The user mode driver will load BPF Type Formats, create BPF maps, populate BPF
maps, load two BPF programs, attach them to BPF iterators, and finally send two
bpf_link IDs back to the kernel.
The kernel will pin two bpf_links into newly mounted bpffs instance under
names "progs.debug" and "maps.debug". These two files become human readable.
$ cat /my/bpffs/progs.debug
id name attached
11 dump_bpf_map bpf_iter_bpf_map
12 dump_bpf_prog bpf_iter_bpf_prog
27 test_pkt_access
32 test_main test_pkt_access test_pkt_access
33 test_subprog1 test_pkt_access_subprog1 test_pkt_access
34 test_subprog2 test_pkt_access_subprog2 test_pkt_access
35 test_subprog3 test_pkt_access_subprog3 test_pkt_access
36 new_get_skb_len get_skb_len test_pkt_access
37 new_get_skb_ifindex get_skb_ifindex test_pkt_access
38 new_get_constant get_constant test_pkt_access
The BPF program dump_bpf_prog() in iterators.bpf.c is printing this data about
all BPF programs currently loaded in the system. This information is unstable
and will change from kernel to kernel as ".debug" suffix conveys.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200819042759.51280-4-alexei.starovoitov@gmail.com
Implement two relocations of a new enumerator value-based CO-RE relocation
kind: ENUMVAL_EXISTS and ENUMVAL_VALUE.
First, ENUMVAL_EXISTS, allows to detect the presence of a named enumerator
value in the target (kernel) BTF. This is useful to do BPF helper/map/program
type support detection from BPF program side. bpf_core_enum_value_exists()
macro helper is provided to simplify built-in usage.
Second, ENUMVAL_VALUE, allows to capture enumerator integer value and relocate
it according to the target BTF, if it changes. This is useful to have
a guarantee against intentional or accidental re-ordering/re-numbering of some
of the internal (non-UAPI) enumerations, where kernel developers don't care
about UAPI backwards compatiblity concerns. bpf_core_enum_value() allows to
capture this succinctly and use correct enum values in code.
LLVM uses ldimm64 instruction to capture enumerator value-based relocations,
so add support for ldimm64 instruction patching as well.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200819194519.3375898-5-andriin@fb.com
Implement support for TYPE_EXISTS/TYPE_SIZE/TYPE_ID_LOCAL/TYPE_ID_REMOTE
relocations. These are examples of type-based relocations, as opposed to
field-based relocations supported already. The difference is that they are
calculating relocation values based on the type itself, not a field within
a struct/union.
Type-based relos have slightly different semantics when matching local types
to kernel target types, see comments in bpf_core_types_are_compat() for
details. Their behavior on failure to find target type in kernel BTF also
differs. Instead of "poisoning" relocatable instruction and failing load
subsequently in kernel, they return 0 (which is rarely a valid return result,
so user BPF code can use that to detect success/failure of the relocation and
deal with it without extra "guarding" relocations). Also, it's always possible
to check existence of the type in target kernel with TYPE_EXISTS relocation,
similarly to a field-based FIELD_EXISTS.
TYPE_ID_LOCAL relocation is a bit special in that it always succeeds (barring
any libbpf/Clang bugs) and resolved to BTF ID using **local** BTF info of BPF
program itself. Tests in subsequent patches demonstrate the usage and
semantics of new relocations.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200819194519.3375898-2-andriin@fb.com
It's trivial to handle missing ELF_C_MMAP_READ support in libelf the way that
objtool has solved it in
("774bec3fddcc objtool: Add fallback from ELF_C_READ_MMAP to ELF_C_READ").
So instead of having an entire feature detector for that, just do what objtool
does for perf and libbpf. And keep their Makefiles a bit simpler.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200819013607.3607269-5-andriin@fb.com
Most of libbpf source files already include libbpf_internal.h, so it's a good
place to centralize identifier poisoning. So move kernel integer type
poisoning there. And also add reallocarray to a poison list to prevent
accidental use of it. libbpf_reallocarray() should be used universally
instead.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200819013607.3607269-4-andriin@fb.com
Most netlink-related functions were unique to bpftool usage, so I moved them
into net.c. Few functions are still used by both bpftool and libbpf itself
internally, so I've copy-pasted them (libbpf_nl_get_link,
libbpf_netlink_open). It's a bit of duplication of code, but better separation
of libbpf as a library with public API and bpftool, relying on unexposed
functions in libbpf.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200819013607.3607269-3-andriin@fb.com
Re-implement glibc's reallocarray() for libbpf internal-only use.
reallocarray(), unfortunately, is not available in all versions of glibc, so
requires extra feature detection and using reallocarray() stub from
<tools/libc_compat.h> and COMPAT_NEED_REALLOCARRAY. All this complicates build
of libbpf unnecessarily and is just a maintenance burden. Instead, it's
trivial to implement libbpf-specific internal version and use it throughout
libbpf.
Which is what this patch does, along with converting some realloc() uses that
should really have been reallocarray() in the first place.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200819013607.3607269-2-andriin@fb.com
Split the instruction patching logic into relocation value calculation and
application of relocation to instruction. Using this, evaluate relocation
against each matching candidate and validate that all candidates agree on
relocated value. If not, report ambiguity and fail load.
This logic is necessary to avoid dangerous (however unlikely) accidental match
against two incompatible candidate types. Without this change, libbpf will
pick a random type as *the* candidate and apply potentially invalid
relocation.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200818223921.2911963-4-andriin@fb.com
Add logging of local/target type kind (struct/union/typedef/etc). Preserve
unresolved root type ID (for cases of typedef). Improve the format of CO-RE
reloc spec output format to contain only relevant and succinct info.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200818223921.2911963-3-andriin@fb.com
Instead of printing out integer value of BTF kind, print out a string
representation of a kind.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200818223921.2911963-2-andriin@fb.com
Detect whether a kernel supports any BTF at all, and if not, don't even
attempt loading BTF to avoid unnecessary log messages like:
libbpf: Error loading BTF: Invalid argument(22)
libbpf: Error loading .BTF into kernel: -22. BTF is optional, ignoring.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200818213356.2629020-8-andriin@fb.com
Now that libbpf can automatically fallback to bpf_probe_read() on old kernels
not yet supporting bpf_probe_read_kernel(), switch libbpf BPF-side helper
macros to use appropriate BPF helper for reading kernel data.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/bpf/20200818213356.2629020-7-andriin@fb.com
Add BPF program code sanitization pass, replacing calls to BPF
bpf_probe_read_{kernel,user}[_str]() helpers with bpf_probe_read[_str](), if
libbpf detects that kernel doesn't support new variants.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200818213356.2629020-5-andriin@fb.com
Factor out common piece of logic that detects support for a feature based on
successfully created FD. Also take care of closing FD, if it was created.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200818213356.2629020-4-andriin@fb.com
Turn libbpf's kernel feature probing into lazily-performed checks. This allows
to skip performing unnecessary feature checks, if a given BPF application
doesn't rely on a particular kernel feature. As we grow number of feature
probes, libbpf might perform less unnecessary syscalls and scale better with
number of feature probes long-term.
By decoupling feature checks from bpf_object, it's also possible to perform
feature probing from libbpf static helpers and low-level APIs, if necessary.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200818213356.2629020-3-andriin@fb.com
On ppc64le we get the following warning:
In file included from btf_dump.c:16:0:
btf_dump.c: In function ‘btf_dump_emit_struct_def’:
../include/linux/kernel.h:20:17: error: comparison of distinct pointer types lacks a cast [-Werror]
(void) (&_max1 == &_max2); \
^
btf_dump.c:882:11: note: in expansion of macro ‘max’
m_sz = max(0LL, btf__resolve_size(d->btf, m->type));
^~~
Fix by explicitly casting to __s64, which is a return type from
btf__resolve_size().
Fixes: 702eddc77a ("libbpf: Handle GCC built-in types for Arm NEON")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200818164456.1181661-1-andriin@fb.com
Pull networking fixes from David Miller:
"Another batch of fixes:
1) Remove nft_compat counter flush optimization, it generates warnings
from the refcount infrastructure. From Florian Westphal.
2) Fix BPF to search for build id more robustly, from Jiri Olsa.
3) Handle bogus getopt lengths in ebtables, from Florian Westphal.
4) Infoleak and other fixes to j1939 CAN driver, from Eric Dumazet and
Oleksij Rempel.
5) Reset iter properly on mptcp sendmsg() error, from Florian
Westphal.
6) Show a saner speed in bonding broadcast mode, from Jarod Wilson.
7) Various kerneldoc fixes in bonding and elsewhere, from Lee Jones.
8) Fix double unregister in bonding during namespace tear down, from
Cong Wang.
9) Disable RP filter during icmp_redirect selftest, from David Ahern"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (75 commits)
otx2_common: Use devm_kcalloc() in otx2_config_npa()
net: qrtr: fix usage of idr in port assignment to socket
selftests: disable rp_filter for icmp_redirect.sh
Revert "net: xdp: pull ethernet header off packet after computing skb->protocol"
phylink: <linux/phylink.h>: fix function prototype kernel-doc warning
mptcp: sendmsg: reset iter on error redux
net: devlink: Remove overzealous WARN_ON with snapshots
tipc: not enable tipc when ipv6 works as a module
tipc: fix uninit skb->data in tipc_nl_compat_dumpit()
net: Fix potential wrong skb->protocol in skb_vlan_untag()
net: xdp: pull ethernet header off packet after computing skb->protocol
ipvlan: fix device features
bonding: fix a potential double-unregister
can: j1939: add rxtimer for multipacket broadcast session
can: j1939: abort multipacket broadcast session when timeout occurs
can: j1939: cancel rxtimer on multipacket broadcast session complete
can: j1939: fix support for multipacket broadcast message
net: fddi: skfp: cfm: Remove seemingly unused variable 'ID_sccs'
net: fddi: skfp: cfm: Remove set but unused variable 'oldstate'
net: fddi: skfp: smt: Remove seemingly unused variable 'ID_sccs'
...
Fixes:
- Fixes for 'perf bench numa'.
- Always memset source before memcpy in 'perf bench mem'.
- Quote CC and CXX for their arguments to fix build in environments using
those variables to pass more than just the compiler names.
- Fix module symbol processing, addressing regression detected via "perf test".
- Allow multiple probes in record+script_probe_vfs_getname.sh 'perf test' entry.
Improvements:
- Add script to autogenerate socket family name id->string table from copy of
kernel header, used so far in 'perf trace'.
- 'perf ftrace' improvements to provide similar options for this utility so
that one can go from 'perf record', 'perf trace', etc to 'perf ftrace' just
by changing the name of the subcommand.
- Prefer new "sched:sched_waking" trace event when it exists in 'perf sched'
post processing.
- Update POWER9 metrics to utilize other metrics.
- Fall back to querying debuginfod if debuginfo not found locally.
Miscellaneous:
- Sync various kvm headers with kernel sources.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Test results:
The first ones are container based builds of tools/perf with and without libelf
support. Where clang is available, it is also used to build perf with/without
libelf, and building with LIBCLANGLLVM=1 (built-in clang) with gcc and clang
when clang and its devel libraries are installed.
The objtool and samples/bpf/ builds are disabled now that I'm switching from
using the sources in a local volume to fetching them from a http server to
build it inside the container, to make it easier to build in a container cluster.
Those will come back later.
Several are cross builds, the ones with -x-ARCH and the android one, and those
may not have all the features built, due to lack of multi-arch devel packages,
available and being used so far on just a few, like
debian:experimental-x-{arm64,mipsel}.
The 'perf test' one will perform a variety of tests exercising
tools/perf/util/, tools/lib/{bpf,traceevent,etc}, as well as run perf commands
with a variety of command line event specifications to then intercept the
sys_perf_event syscall to check that the perf_event_attr fields are set up as
expected, among a variety of other unit tests.
Then there is the 'make -C tools/perf build-test' ones, that build tools/perf/
with a variety of feature sets, exercising the build with an incomplete set of
features as well as with a complete one. It is planned to have it run on each
of the containers mentioned above, using some container orchestration
infrastructure. Get in contact if interested in helping having this in place.
fedora:rawhide with python3 and gcc 10.1.1-2 is failing (10.1.1-1 on fedora:32
works), fixes will be provided soon.
clearlinux:latest is failing on libbpf, there is a fix already in the bpf tree.
# export PERF_TARBALL=http://192.168.124.1/perf/perf-5.8.0.tar.xz
# dm
1 alpine:3.4 : Ok gcc (Alpine 5.3.0) 5.3.0, clang version 3.8.0 (tags/RELEASE_380/final)
2 alpine:3.5 : Ok gcc (Alpine 6.2.1) 6.2.1 20160822, clang version 3.8.1 (tags/RELEASE_381/final)
3 alpine:3.6 : Ok gcc (Alpine 6.3.0) 6.3.0, clang version 4.0.0 (tags/RELEASE_400/final)
4 alpine:3.7 : Ok gcc (Alpine 6.4.0) 6.4.0, Alpine clang version 5.0.0 (tags/RELEASE_500/final) (based on LLVM 5.0.0)
5 alpine:3.8 : Ok gcc (Alpine 6.4.0) 6.4.0, Alpine clang version 5.0.1 (tags/RELEASE_501/final) (based on LLVM 5.0.1)
6 alpine:3.9 : Ok gcc (Alpine 8.3.0) 8.3.0, Alpine clang version 5.0.1 (tags/RELEASE_502/final) (based on LLVM 5.0.1)
7 alpine:3.10 : Ok gcc (Alpine 8.3.0) 8.3.0, Alpine clang version 8.0.0 (tags/RELEASE_800/final) (based on LLVM 8.0.0)
8 alpine:3.11 : Ok gcc (Alpine 9.2.0) 9.2.0, Alpine clang version 9.0.0 (https://git.alpinelinux.org/aports f7f0d2c2b8bcd6a5843401a9a702029556492689) (based on LLVM 9.0.0)
9 alpine:3.12 : Ok gcc (Alpine 9.3.0) 9.3.0, Alpine clang version 10.0.0 (https://gitlab.alpinelinux.org/alpine/aports.git 7445adce501f8473efdb93b17b5eaf2f1445ed4c)
10 alpine:edge : Ok gcc (Alpine 9.3.0) 9.3.0, Alpine clang version 10.0.0 (git://git.alpinelinux.org/aports 7445adce501f8473efdb93b17b5eaf2f1445ed4c)
11 alt:p8 : Ok x86_64-alt-linux-gcc (GCC) 5.3.1 20151207 (ALT p8 5.3.1-alt3.M80P.1), clang version 3.8.0 (tags/RELEASE_380/final)
12 alt:p9 : Ok x86_64-alt-linux-gcc (GCC) 8.4.1 20200305 (ALT p9 8.4.1-alt0.p9.1), clang version 7.0.1
13 alt:sisyphus : Ok x86_64-alt-linux-gcc (GCC) 9.2.1 20200123 (ALT Sisyphus 9.2.1-alt3), clang version 10.0.0
14 amazonlinux:1 : Ok gcc (GCC) 7.2.1 20170915 (Red Hat 7.2.1-2), clang version 3.6.2 (tags/RELEASE_362/final)
15 amazonlinux:2 : Ok gcc (GCC) 7.3.1 20180712 (Red Hat 7.3.1-9), clang version 7.0.1 (Amazon Linux 2 7.0.1-1.amzn2.0.2)
16 android-ndk:r12b-arm : Ok arm-linux-androideabi-gcc (GCC) 4.9.x 20150123 (prerelease)
17 android-ndk:r15c-arm : Ok arm-linux-androideabi-gcc (GCC) 4.9.x 20150123 (prerelease)
18 centos:6 : Ok gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-23)
19 centos:7 : Ok gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-39)
20 centos:8 : Ok gcc (GCC) 8.3.1 20191121 (Red Hat 8.3.1-5), clang version 9.0.1 (Red Hat 9.0.1-2.module_el8.2.0+309+0c7b6b03)
21 clearlinux:latest : FAIL gcc (Clear Linux OS for Intel Architecture) 10.2.1 20200723 releases/gcc-10.2.0-3-g677b80db41, clang version 10.0.1
22 debian:8 : Ok gcc (Debian 4.9.2-10+deb8u2) 4.9.2, Debian clang version 3.5.0-10 (tags/RELEASE_350/final) (based on LLVM 3.5.0)
23 debian:9 : Ok gcc (Debian 6.3.0-18+deb9u1) 6.3.0 20170516, clang version 3.8.1-24 (tags/RELEASE_381/final)
24 debian:10 : Ok gcc (Debian 8.3.0-6) 8.3.0, clang version 7.0.1-8 (tags/RELEASE_701/final)
25 debian:experimental : Ok gcc (Debian 10.2.0-3) 10.2.0, Debian clang version 11.0.0-+rc1-1
26 debian:experimental-x-arm64 : Ok aarch64-linux-gnu-gcc (Debian 9.3.0-8) 9.3.0
27 debian:experimental-x-mips : Ok mips-linux-gnu-gcc (Debian 8.3.0-19) 8.3.0
28 debian:experimental-x-mips64 : Ok mips64-linux-gnuabi64-gcc (Debian 9.3.0-8) 9.3.0
29 debian:experimental-x-mipsel : Ok mipsel-linux-gnu-gcc (Debian 9.2.1-8) 9.2.1 20190909
30 fedora:20 : Ok gcc (GCC) 4.8.3 20140911 (Red Hat 4.8.3-7)
31 fedora:22 : Ok gcc (GCC) 5.3.1 20160406 (Red Hat 5.3.1-6), clang version 3.5.0 (tags/RELEASE_350/final)
32 fedora:23 : Ok gcc (GCC) 5.3.1 20160406 (Red Hat 5.3.1-6), clang version 3.7.0 (tags/RELEASE_370/final)
33 fedora:24 : Ok gcc (GCC) 6.3.1 20161221 (Red Hat 6.3.1-1), clang version 3.8.1 (tags/RELEASE_381/final)
34 fedora:24-x-ARC-uClibc : Ok arc-linux-gcc (ARCompact ISA Linux uClibc toolchain 2017.09-rc2) 7.1.1 20170710
35 fedora:25 : Ok gcc (GCC) 6.4.1 20170727 (Red Hat 6.4.1-1), clang version 3.9.1 (tags/RELEASE_391/final)
36 fedora:26 : Ok gcc (GCC) 7.3.1 20180130 (Red Hat 7.3.1-2), clang version 4.0.1 (tags/RELEASE_401/final)
37 fedora:27 : Ok gcc (GCC) 7.3.1 20180712 (Red Hat 7.3.1-6), clang version 5.0.2 (tags/RELEASE_502/final)
38 fedora:28 : Ok gcc (GCC) 8.3.1 20190223 (Red Hat 8.3.1-2), clang version 6.0.1 (tags/RELEASE_601/final)
39 fedora:29 : Ok gcc (GCC) 8.3.1 20190223 (Red Hat 8.3.1-2), clang version 7.0.1 (Fedora 7.0.1-6.fc29)
40 fedora:30 : Ok gcc (GCC) 9.3.1 20200408 (Red Hat 9.3.1-2), clang version 8.0.0 (Fedora 8.0.0-3.fc30)
41 fedora:30-x-ARC-glibc : Ok arc-linux-gcc (ARC HS GNU/Linux glibc toolchain 2019.03-rc1) 8.3.1 20190225
42 fedora:30-x-ARC-uClibc : Ok arc-linux-gcc (ARCv2 ISA Linux uClibc toolchain 2019.03-rc1) 8.3.1 20190225
43 fedora:31 : Ok gcc (GCC) 9.3.1 20200408 (Red Hat 9.3.1-2), clang version 9.0.1 (Fedora 9.0.1-2.fc31)
44 fedora:32 : Ok gcc (GCC) 10.1.1 20200507 (Red Hat 10.1.1-1), clang version 10.0.0 (Fedora 10.0.0-2.fc32)
45 fedora:rawhide : FAIL gcc (GCC) 10.2.1 20200804 (Red Hat 10.2.1-2), clang version 10.0.0 (Fedora 10.0.0-11.fc33)
util/scripting-engines/trace-event-python.c: In function 'python_start_script':
util/scripting-engines/trace-event-python.c:1595:2: error: 'visibility' attribute ignored [-Werror=attributes]
1595 | PyMODINIT_FUNC (*initfunc)(void);
| ^~~~~~~~~~~~~~
46 gentoo-stage3-amd64:latest : Ok gcc (Gentoo 9.3.0-r1 p3) 9.3.0
47 mageia:5 : Ok gcc (GCC) 4.9.2, clang version 3.5.2 (tags/RELEASE_352/final)
48 mageia:6 : Ok gcc (Mageia 5.5.0-1.mga6) 5.5.0, clang version 3.9.1 (tags/RELEASE_391/final)
49 mageia:7 : Ok gcc (Mageia 8.3.1-0.20190524.1.mga7) 8.3.1 20190524, clang version 8.0.0 (Mageia 8.0.0-1.mga7)
50 manjaro:latest : Ok gcc (GCC) 9.2.0, clang version 9.0.0 (tags/RELEASE_900/final)
51 openmandriva:cooker : Ok gcc (GCC) 10.0.0 20200502 (OpenMandriva), clang version 10.0.1
52 opensuse:15.0 : Ok gcc (SUSE Linux) 7.4.1 20190424 [gcc-7-branch revision 270538], clang version 5.0.1 (tags/RELEASE_501/final 312548)
53 opensuse:15.1 : Ok gcc (SUSE Linux) 7.5.0, clang version 7.0.1 (tags/RELEASE_701/final 349238)
54 opensuse:15.2 : Ok gcc (SUSE Linux) 7.5.0, clang version 9.0.1
55 opensuse:42.3 : Ok gcc (SUSE Linux) 4.8.5, clang version 3.8.0 (tags/RELEASE_380/final 262553)
56 opensuse:tumbleweed : Ok gcc (SUSE Linux) 10.2.1 20200728 [revision c0438ced53bcf57e4ebb1c38c226e41571aca892], clang version 10.0.1
57 oraclelinux:6 : Ok gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-23.0.1)
58 oraclelinux:7 : Ok gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-39.0.5)
59 oraclelinux:8 : Ok gcc (GCC) 8.3.1 20191121 (Red Hat 8.3.1-5.0.3), clang version 9.0.1 (Red Hat 9.0.1-2.0.1.module+el8.2.0+5599+9ed9ef6d)
60 ubuntu:12.04 : Ok gcc (Ubuntu/Linaro 4.6.3-1ubuntu5) 4.6.3, Ubuntu clang version 3.0-6ubuntu3 (tags/RELEASE_30/final) (based on LLVM 3.0)
61 ubuntu:14.04 : Ok gcc (Ubuntu 4.8.4-2ubuntu1~14.04.4) 4.8.4
62 ubuntu:16.04 : Ok gcc (Ubuntu 5.4.0-6ubuntu1~16.04.12) 5.4.0 20160609, clang version 3.8.0-2ubuntu4 (tags/RELEASE_380/final)
63 ubuntu:16.04-x-arm : Ok arm-linux-gnueabihf-gcc (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
64 ubuntu:16.04-x-arm64 : Ok aarch64-linux-gnu-gcc (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
65 ubuntu:16.04-x-powerpc : Ok powerpc-linux-gnu-gcc (Ubuntu 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
66 ubuntu:16.04-x-powerpc64 : Ok powerpc64-linux-gnu-gcc (Ubuntu/IBM 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
67 ubuntu:16.04-x-powerpc64el : Ok powerpc64le-linux-gnu-gcc (Ubuntu/IBM 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
68 ubuntu:16.04-x-s390 : Ok s390x-linux-gnu-gcc (Ubuntu 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
69 ubuntu:18.04 : Ok gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0, clang version 6.0.0-1ubuntu2 (tags/RELEASE_600/final)
70 ubuntu:18.04-x-arm : Ok arm-linux-gnueabihf-gcc (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) 7.5.0
71 ubuntu:18.04-x-arm64 : Ok aarch64-linux-gnu-gcc (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) 7.5.0
72 ubuntu:18.04-x-m68k : Ok m68k-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
73 ubuntu:18.04-x-powerpc : Ok powerpc-linux-gnu-gcc (Ubuntu 7.4.0-1ubuntu1~18.04.1) 7.4.0
74 ubuntu:18.04-x-powerpc64 : Ok powerpc64-linux-gnu-gcc (Ubuntu 7.4.0-1ubuntu1~18.04.1) 7.4.0
75 ubuntu:18.04-x-powerpc64el : Ok powerpc64le-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
76 ubuntu:18.04-x-riscv64 : Ok riscv64-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
77 ubuntu:18.04-x-s390 : Ok s390x-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
78 ubuntu:18.04-x-sh4 : Ok sh4-linux-gnu-gcc (Ubuntu 7.4.0-1ubuntu1~18.04.1) 7.4.0
79 ubuntu:18.04-x-sparc64 : Ok sparc64-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
80 ubuntu:18.10 : Ok gcc (Ubuntu 8.3.0-6ubuntu1~18.10.1) 8.3.0, clang version 7.0.0-3 (tags/RELEASE_700/final)
81 ubuntu:19.04 : Ok gcc (Ubuntu 8.3.0-6ubuntu1) 8.3.0, clang version 8.0.0-3 (tags/RELEASE_800/final)
82 ubuntu:19.04-x-alpha : Ok alpha-linux-gnu-gcc (Ubuntu 8.3.0-6ubuntu1) 8.3.0
83 ubuntu:19.04-x-arm64 : Ok aarch64-linux-gnu-gcc (Ubuntu/Linaro 8.3.0-6ubuntu1) 8.3.0
84 ubuntu:19.04-x-hppa : Ok hppa-linux-gnu-gcc (Ubuntu 8.3.0-6ubuntu1) 8.3.0
85 ubuntu:19.10 : Ok gcc (Ubuntu 9.2.1-9ubuntu2) 9.2.1 20191008, clang version 8.0.1-3build1 (tags/RELEASE_801/final)
86 ubuntu:20.04 : Ok gcc (Ubuntu 9.3.0-10ubuntu2) 9.3.0, clang version 10.0.0-4ubuntu1
#
# git log --oneline -1
492e4edba6 (HEAD -> perf/core) perf ftrace: Make option description initials all capital letters
# perf -vv
perf version 5.8.g492e4edba6e2
dwarf: [ on ] # HAVE_DWARF_SUPPORT
dwarf_getlocations: [ on ] # HAVE_DWARF_GETLOCATIONS_SUPPORT
glibc: [ on ] # HAVE_GLIBC_SUPPORT
gtk2: [ on ] # HAVE_GTK2_SUPPORT
syscall_table: [ on ] # HAVE_SYSCALL_TABLE_SUPPORT
libbfd: [ on ] # HAVE_LIBBFD_SUPPORT
libelf: [ on ] # HAVE_LIBELF_SUPPORT
libnuma: [ on ] # HAVE_LIBNUMA_SUPPORT
numa_num_possible_cpus: [ on ] # HAVE_LIBNUMA_SUPPORT
libperl: [ on ] # HAVE_LIBPERL_SUPPORT
libpython: [ on ] # HAVE_LIBPYTHON_SUPPORT
libslang: [ on ] # HAVE_SLANG_SUPPORT
libcrypto: [ on ] # HAVE_LIBCRYPTO_SUPPORT
libunwind: [ on ] # HAVE_LIBUNWIND_SUPPORT
libdw-dwarf-unwind: [ on ] # HAVE_DWARF_SUPPORT
zlib: [ on ] # HAVE_ZLIB_SUPPORT
lzma: [ on ] # HAVE_LZMA_SUPPORT
get_cpuid: [ on ] # HAVE_AUXTRACE_SUPPORT
bpf: [ on ] # HAVE_LIBBPF_SUPPORT
aio: [ on ] # HAVE_AIO_SUPPORT
zstd: [ on ] # HAVE_ZSTD_SUPPORT
# uname -a
Linux quaco 5.7.14-200.fc32.x86_64 #1 SMP Fri Aug 7 23:16:37 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
# perf test
1: vmlinux symtab matches kallsyms : Ok
2: Detect openat syscall event : Ok
3: Detect openat syscall event on all cpus : Ok
4: Read samples using the mmap interface : Ok
5: Test data source output : Ok
6: Parse event definition strings : Ok
7: Simple expression parser : Ok
8: PERF_RECORD_* events & perf_sample fields : Ok
9: Parse perf pmu format : Ok
10: PMU events :
10.1: PMU event table sanity : Ok
10.2: PMU event map aliases : Ok
10.3: Parsing of PMU event table metrics : Skip (some metrics failed)
10.4: Parsing of PMU event table metrics with fake PMUs : Ok
11: DSO data read : Ok
12: DSO data cache : Ok
13: DSO data reopen : Ok
14: Roundtrip evsel->name : Ok
15: Parse sched tracepoints fields : Ok
16: syscalls:sys_enter_openat event fields : Ok
17: Setup struct perf_event_attr : Ok
18: Match and link multiple hists : Ok
19: 'import perf' in python : Ok
20: Breakpoint overflow signal handler : Ok
21: Breakpoint overflow sampling : Ok
22: Breakpoint accounting : Ok
23: Watchpoint :
23.1: Read Only Watchpoint : Skip
23.2: Write Only Watchpoint : Ok
23.3: Read / Write Watchpoint : Ok
23.4: Modify Watchpoint : Ok
24: Number of exit events of a simple workload : Ok
25: Software clock events period values : Ok
26: Object code reading : Ok
27: Sample parsing : Ok
28: Use a dummy software event to keep tracking : Ok
29: Parse with no sample_id_all bit set : Ok
30: Filter hist entries : Ok
31: Lookup mmap thread : Ok
32: Share thread maps : Ok
33: Sort output of hist entries : Ok
34: Cumulate child hist entries : Ok
35: Track with sched_switch : Ok
36: Filter fds with revents mask in a fdarray : Ok
37: Add fd to a fdarray, making it autogrow : Ok
38: kmod_path__parse : Ok
39: Thread map : Ok
40: LLVM search and compile :
40.1: Basic BPF llvm compile : Ok
40.2: kbuild searching : Ok
40.3: Compile source for BPF prologue generation : Ok
40.4: Compile source for BPF relocation : Ok
41: Session topology : Ok
42: BPF filter :
42.1: Basic BPF filtering : Ok
42.2: BPF pinning : Ok
42.3: BPF prologue generation : Ok
42.4: BPF relocation checker : Ok
43: Synthesize thread map : Ok
44: Remove thread map : Ok
45: Synthesize cpu map : Ok
46: Synthesize stat config : Ok
47: Synthesize stat : Ok
48: Synthesize stat round : Ok
49: Synthesize attr update : Ok
50: Event times : Ok
51: Read backward ring buffer : Ok
52: Print cpu map : Ok
53: Merge cpu map : Ok
54: Probe SDT events : Ok
55: is_printable_array : Ok
56: Print bitmap : Ok
57: perf hooks : Ok
58: builtin clang support : Skip (not compiled in)
59: unit_number__scnprintf : Ok
60: mem2node : Ok
61: time utils : Ok
62: Test jit_write_elf : Ok
63: Test libpfm4 support : Skip (not compiled in)
64: Test api io : Ok
65: maps__merge_in : Ok
66: Demangle Java : Ok
67: Parse and process metrics : Ok
68: x86 rdpmc : Ok
69: Convert perf time to TSC : Ok
70: DWARF unwind : Ok
71: x86 instruction decoder - new instructions : Ok
72: Intel PT packet decoder : Ok
73: x86 bp modify : Ok
74: probe libc's inet_pton & backtrace it with ping : Ok
75: Use vfs_getname probe to get syscall args filenames : Ok
76: Add vfs_getname probe to get syscall args filenames : Ok
77: Check open filename arg using perf trace + vfs_getname: Ok
78: Zstd perf.data compression/decompression : Ok
#
$ cd ~acme/git/perf ; git log --oneline -1 ; time make -C tools/perf build-test
492e4edba6 (HEAD -> perf/core) perf ftrace: Make option description initials all capital letters
make: Entering directory '/home/acme/git/perf/tools/perf'
- tarpkg: ./tests/perf-targz-src-pkg .
make_install_prefix_slash_O: make install prefix=/tmp/krava/
make_clean_all_O: make clean all
make_cscope_O: make cscope
make_install_prefix_O: make install prefix=/tmp/krava
make_static_O: make LDFLAGS=-static NO_PERF_READ_VDSO32=1 NO_PERF_READ_VDSOX32=1 NO_JVMTI=1
make_no_libunwind_O: make NO_LIBUNWIND=1
make_with_clangllvm_O: make LIBCLANGLLVM=1
make_no_libnuma_O: make NO_LIBNUMA=1
make_install_bin_O: make install-bin
make_perf_o_O: make perf.o
make_install_O: make install
make_no_sdt_O: make NO_SDT=1
make_no_backtrace_O: make NO_BACKTRACE=1
make_no_libaudit_O: make NO_LIBAUDIT=1
make_no_gtk2_O: make NO_GTK2=1
make_no_syscall_tbl_O: make NO_SYSCALL_TABLE=1
make_no_demangle_O: make NO_DEMANGLE=1
make_debug_O: make DEBUG=1
make_no_libpython_O: make NO_LIBPYTHON=1
make_no_ui_O: make NO_NEWT=1 NO_SLANG=1 NO_GTK2=1
make_no_libbpf_DEBUG_O: make NO_LIBBPF=1 DEBUG=1
make_help_O: make help
make_no_libbionic_O: make NO_LIBBIONIC=1
make_no_newt_O: make NO_NEWT=1
make_no_slang_O: make NO_SLANG=1
make_util_map_o_O: make util/map.o
make_no_auxtrace_O: make NO_AUXTRACE=1
make_doc_O: make doc
make_no_libdw_dwarf_unwind_O: make NO_LIBDW_DWARF_UNWIND=1
make_no_libelf_O: make NO_LIBELF=1
make_no_libcrypto_O: make NO_LIBCRYPTO=1
make_minimal_O: make NO_LIBPERL=1 NO_LIBPYTHON=1 NO_NEWT=1 NO_GTK2=1 NO_DEMANGLE=1 NO_LIBELF=1 NO_LIBUNWIND=1 NO_BACKTRACE=1 NO_LIBNUMA=1 NO_LIBAUDIT=1 NO_LIBBIONIC=1 NO_LIBDW_DWARF_UNWIND=1 NO_AUXTRACE=1 NO_LIBBPF=1 NO_LIBCRYPTO=1 NO_SDT=1 NO_JVMTI=1 NO_LIBZSTD=1 NO_LIBCAP=1 NO_SYSCALL_TABLE=1
make_no_libbpf_O: make NO_LIBBPF=1
make_no_scripts_O: make NO_LIBPYTHON=1 NO_LIBPERL=1
make_no_libperl_O: make NO_LIBPERL=1
make_util_pmu_bison_o_O: make util/pmu-bison.o
make_with_babeltrace_O: make LIBBABELTRACE=1
make_pure_O: make
make_with_libpfm4_O: make LIBPFM4=1
make_tags_O: make tags
OK
make: Leaving directory '/home/acme/git/perf/tools/perf'
$
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCXzbOAgAKCRCyPKLppCJ+
J3W5AQCnQL+x8b8o3a3kvZcvABrZmopaMTomjMbyhnSGGNTYLQD9FFCL4+Z9F5yB
+82safSVWYLc8toOZnyKC3nzKiLsKQ0=
=CnTh
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-2020-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull more perf tools updates from Arnaldo Carvalho de Melo:
"Fixes:
- Fixes for 'perf bench numa'.
- Always memset source before memcpy in 'perf bench mem'.
- Quote CC and CXX for their arguments to fix build in environments
using those variables to pass more than just the compiler names.
- Fix module symbol processing, addressing regression detected via
"perf test".
- Allow multiple probes in record+script_probe_vfs_getname.sh 'perf
test' entry.
Improvements:
- Add script to autogenerate socket family name id->string table from
copy of kernel header, used so far in 'perf trace'.
- 'perf ftrace' improvements to provide similar options for this
utility so that one can go from 'perf record', 'perf trace', etc to
'perf ftrace' just by changing the name of the subcommand.
- Prefer new "sched:sched_waking" trace event when it exists in 'perf
sched' post processing.
- Update POWER9 metrics to utilize other metrics.
- Fall back to querying debuginfod if debuginfo not found locally.
Miscellaneous:
- Sync various kvm headers with kernel sources"
* tag 'perf-tools-2020-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (40 commits)
perf ftrace: Make option description initials all capital letters
perf build-ids: Fall back to debuginfod query if debuginfo not found
perf bench numa: Remove dead code in parse_nodes_opt()
perf stat: Update POWER9 metrics to utilize other metrics
perf ftrace: Add change log
perf: ftrace: Add set_tracing_options() to set all trace options
perf ftrace: Add option --tid to filter by thread id
perf ftrace: Add option -D/--delay to delay tracing
perf: ftrace: Allow set graph depth by '--graph-opts'
perf ftrace: Add support for trace option tracing_thresh
perf ftrace: Add option 'verbose' to show more info for graph tracer
perf ftrace: Add support for tracing option 'irq-info'
perf ftrace: Add support for trace option funcgraph-irqs
perf ftrace: Add support for trace option sleep-time
perf ftrace: Add support for tracing option 'func_stack_trace'
perf tools: Add general function to parse sublevel options
perf ftrace: Add option '--inherit' to trace children processes
perf ftrace: Show trace column header
perf ftrace: Add option '-m/--buffer-size' to set per-cpu buffer size
perf ftrace: Factor out function write_tracing_file_int()
...
Daniel Borkmann says:
====================
pull-request: bpf 2020-08-15
The following pull-request contains BPF updates for your *net* tree.
We've added 23 non-merge commits during the last 4 day(s) which contain
a total of 32 files changed, 421 insertions(+), 141 deletions(-).
The main changes are:
1) Fix sock_ops ctx access splat due to register override, from John Fastabend.
2) Batch of various fixes to libbpf, bpftool, and selftests when testing build
in 32-bit mode, from Andrii Nakryiko.
3) Fix vmlinux.h generation on ARM by mapping GCC built-in types (__Poly*_t)
to equivalent ones clang can work with, from Jean-Philippe Brucker.
4) Fix build_id lookup in bpf_get_stackid() helper by walking all NOTE ELF
sections instead of just first, from Jiri Olsa.
5) Avoid use of __builtin_offsetof() in libbpf for CO-RE, from Yonghong Song.
6) Fix segfault in test_mmap due to inconsistent length params, from Jianlin Lv.
7) Don't override errno in libbpf when logging errors, from Toke Høiland-Jørgensen.
8) Fix v4_to_v6 sockaddr conversion in sk_lookup test, from Stanislav Fomichev.
9) Add link to bpf-helpers(7) man page to BPF doc, from Joe Stringer.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
"Some merge window fallout, some longer term fixes:
1) Handle headroom properly in lapbether and x25_asy drivers, from
Xie He.
2) Fetch MAC address from correct r8152 device node, from Thierry
Reding.
3) In the sw kTLS path we should allow MSG_CMSG_COMPAT in sendmsg,
from Rouven Czerwinski.
4) Correct fdputs in socket layer, from Miaohe Lin.
5) Revert troublesome sockptr_t optimization, from Christoph Hellwig.
6) Fix TCP TFO key reading on big endian, from Jason Baron.
7) Missing CAP_NET_RAW check in nfc, from Qingyu Li.
8) Fix inet fastreuse optimization with tproxy sockets, from Tim
Froidcoeur.
9) Fix 64-bit divide in new SFC driver, from Edward Cree.
10) Add a tracepoint for prandom_u32 so that we can more easily
perform usage analysis. From Eric Dumazet.
11) Fix rwlock imbalance in AF_PACKET, from John Ogness"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (49 commits)
net: openvswitch: introduce common code for flushing flows
af_packet: TPACKET_V3: fix fill status rwlock imbalance
random32: add a tracepoint for prandom_u32()
Revert "ipv4: tunnel: fix compilation on ARCH=um"
net: accept an empty mask in /sys/class/net/*/queues/rx-*/rps_cpus
net: ethernet: stmmac: Disable hardware multicast filter
net: stmmac: dwmac1000: provide multicast filter fallback
ipv4: tunnel: fix compilation on ARCH=um
vsock: fix potential null pointer dereference in vsock_poll()
sfc: fix ef100 design-param checking
net: initialize fastreuse on inet_inherit_port
net: refactor bind_bucket fastreuse into helper
net: phy: marvell10g: fix null pointer dereference
net: Fix potential memory leak in proto_register()
net: qcom/emac: add missed clk_disable_unprepare in error path of emac_clks_phase1_init
ionic_lif: Use devm_kcalloc() in ionic_qcq_alloc()
net/nfc/rawsock.c: add CAP_NET_RAW check.
hinic: fix strncpy output truncated compile warnings
drivers/net/wan/x25_asy: Added needed_headroom and a skb->len check
net/tls: Fix kmap usage
...
