Commit Graph

1062714 Commits

Author SHA1 Message Date
Will Deacon
527a7f5252 perf/smmuv3: Fix unused variable warning when CONFIG_OF=n
The kbuild robot reports that building the SMMUv3 PMU driver with
CONFIG_OF=n results in a warning for W=1 builds:

>> drivers/perf/arm_smmuv3_pmu.c:889:34: warning: unused variable 'smmu_pmu_of_match' [-Wunused-const-variable]
   static const struct of_device_id smmu_pmu_of_match[] = {
                                    ^

Guard the match table with #ifdef CONFIG_OF.

Link: https://lore.kernel.org/r/202201041700.01KZEzhb-lkp@intel.com
Fixes: 3f7be43561 ("perf/smmuv3: Add devicetree support")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Will Deacon <will@kernel.org>
2022-01-04 13:38:16 +00:00
Eric Dumazet
7d18a07897 sch_qfq: prevent shift-out-of-bounds in qfq_init_qdisc
tx_queue_len can be set to ~0U, we need to be more
careful about overflows.

__fls(0) is undefined, as this report shows:

UBSAN: shift-out-of-bounds in net/sched/sch_qfq.c:1430:24
shift exponent 51770272 is too large for 32-bit type 'int'
CPU: 0 PID: 25574 Comm: syz-executor.0 Not tainted 5.16.0-rc7-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0x201/0x2d8 lib/dump_stack.c:106
 ubsan_epilogue lib/ubsan.c:151 [inline]
 __ubsan_handle_shift_out_of_bounds+0x494/0x530 lib/ubsan.c:330
 qfq_init_qdisc+0x43f/0x450 net/sched/sch_qfq.c:1430
 qdisc_create+0x895/0x1430 net/sched/sch_api.c:1253
 tc_modify_qdisc+0x9d9/0x1e20 net/sched/sch_api.c:1660
 rtnetlink_rcv_msg+0x934/0xe60 net/core/rtnetlink.c:5571
 netlink_rcv_skb+0x200/0x470 net/netlink/af_netlink.c:2496
 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
 netlink_unicast+0x814/0x9f0 net/netlink/af_netlink.c:1345
 netlink_sendmsg+0xaea/0xe60 net/netlink/af_netlink.c:1921
 sock_sendmsg_nosec net/socket.c:704 [inline]
 sock_sendmsg net/socket.c:724 [inline]
 ____sys_sendmsg+0x5b9/0x910 net/socket.c:2409
 ___sys_sendmsg net/socket.c:2463 [inline]
 __sys_sendmsg+0x280/0x370 net/socket.c:2492
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Fixes: 462dbc9101 ("pkt_sched: QFQ Plus: fair-queueing service at DRR cost")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-04 12:36:51 +00:00
Christoph Hellwig
3087a6f36e netrom: fix copying in user data in nr_setsockopt
This code used to copy in an unsigned long worth of data before
the sockptr_t conversion, so restore that.

Fixes: a7b75c5a8c ("net: pass a sockptr_t into ->setsockopt")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-04 12:36:01 +00:00
David S. Miller
d2d9a6d0b4 Merge branch 'srv6-traceroute'
Andrew Lunn says:

====================
Fix traceroute in the presence of SRv6

When using SRv6 the destination IP address in the IPv6 header is not
always the true destination, it can be a router along the path that
SRv6 is using.

When ICMP reports an error, e.g, time exceeded, which is what
traceroute uses, it included the packet which invoked the error into
the ICMP message body. Upon receiving such an ICMP packet, the
invoking packet is examined and an attempt is made to find the socket
which sent the packet, so the error can be reported. Lookup is
performed using the source and destination address. If the
intermediary router IP address from the IP header is used, the lookup
fails. It is necessary to dig into the header and find the true
destination address in the Segment Router header, SRH.

v2:
Play games with the skb->network_header rather than clone the skb
v3:
Move helpers into seg6.c
v4:
Move short helper into header file.
Rework getting SRH destination address
v5:
Fix comment to describe function, not caller

Patch 1 exports a helper which can find the SRH in a packet
Patch 2 does the actual examination of the invoking packet
Patch 3 makes use of the results when trying to find the socket.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-04 12:17:35 +00:00
Andrew Lunn
222a011efc udp6: Use Segment Routing Header for dest address if present
When finding the socket to report an error on, if the invoking packet
is using Segment Routing, the IPv6 destination address is that of an
intermediate router, not the end destination. Extract the ultimate
destination address from the segment address.

This change allows traceroute to function in the presence of Segment
Routing.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-04 12:17:35 +00:00
Andrew Lunn
e41294408c icmp: ICMPV6: Examine invoking packet for Segment Route Headers.
RFC8754 says:

ICMP error packets generated within the SR domain are sent to source
nodes within the SR domain.  The invoking packet in the ICMP error
message may contain an SRH.  Since the destination address of a packet
with an SRH changes as each segment is processed, it may not be the
destination used by the socket or application that generated the
invoking packet.

For the source of an invoking packet to process the ICMP error
message, the ultimate destination address of the IPv6 header may be
required.  The following logic is used to determine the destination
address for use by protocol-error handlers.

*  Walk all extension headers of the invoking IPv6 packet to the
   routing extension header preceding the upper-layer header.

   -  If routing header is type 4 Segment Routing Header (SRH)

      o  The SID at Segment List[0] may be used as the destination
         address of the invoking packet.

Mangle the skb so the network header points to the invoking packet
inside the ICMP packet. The seg6 helpers can then be used on the skb
to find any segment routing headers. If found, mark this fact in the
IPv6 control block of the skb, and store the offset into the packet of
the SRH. Then restore the skb back to its old state.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-04 12:17:35 +00:00
Andrew Lunn
fa55a7d745 seg6: export get_srh() for ICMP handling
An ICMP error message can contain in its message body part of an IPv6
packet which invoked the error. Such a packet might contain a segment
router header. Export get_srh() so the ICMP code can make use of it.

Since his changes the scope of the function from local to global, add
the seg6_ prefix to keep the namespace clean. And move it into seg6.c
so it is always available, not just when IPV6_SEG6_LWTUNNEL is
enabled.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-04 12:17:35 +00:00
Jens Axboe
26bc4f019c Merge branch 'md-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md into block-5.16
Pull MD fix from Song, fixing a raid1 regression with missing bitmap
updates.

* 'md-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
  md/raid1: fix missing bitmap update w/o WriteMostly devices
2022-01-03 21:21:11 -07:00
Jakub Kicinski
e8fe9e8308 Here is a batman-adv bugfix:
- avoid sending link-local multicast to multicast routers,
    by Linus Lüssing
 -----BEGIN PGP SIGNATURE-----
 
 iQJKBAABCgA0FiEE1ilQI7G+y+fdhnrfoSvjmEKSnqEFAmHTLdgWHHN3QHNpbW9u
 d3VuZGVybGljaC5kZQAKCRChK+OYQpKeoav6D/97MFOCsOJqruKu3k8X7tw4BtVl
 l6nhTE/Sa+b742hzOpI/F4TS/rzoya7JsUWxzF4YcYCf/LNgXljFBoY+SBNVXR/6
 uT/i6SisVEXvrxJNBhMU/27WTaBv7/HMPfQ6cCUpC6g97+smV7WJRTY8pbYvFMI3
 okBLbf57NpPfmyaog1GEhiIpYUgFxN/yt0D8ZxcFe+tkfe9zv/WYvMgyrAYq81/y
 hceIDYurhyWYoJTUOz6BeKOnqwdAz8hlxZPkhO2cYakqwdy+MfPdxYJcH6eDTQzJ
 M6Q7lSufvcK43NYq4LCLLvXUth4S6rLMkP6vmQ4KI/31Hl/RbFHMrwJNs7+1NgNM
 jcEGe62DH+980k8yaDrGVjrHgVrYYEzziG3zAqAMwkP4GseF1PKir2vv6GN9rCIh
 I1xEvQXNAuCiBQlhUzJt0rWdSX44FjL2KpcyN0xeu1GMlwjqzP6fGzRG0HfxjASv
 2GuP5Pw6KLkci1jOGkZrYse5jZPY/++lyC9KJJqiwpqqiqCsvmsKbo/IKzwUSBwV
 GfaqMG/xw3txXsClQePJGOXe3kij0uiEuw5RvPUEEkG5pDoF3SBH4tqKYuxju19b
 dEGSvtx2wLsT5J+xJRBK3IXWrLDeQtiLLTIrIiTdrCiPhRLLYMRknHVvYWr2iGA3
 jBNOoIo9007Q/KBPQw==
 =fn2W
 -----END PGP SIGNATURE-----

Merge tag 'batadv-net-pullrequest-20220103' of git://git.open-mesh.org/linux-merge

Simon Wunderlich says:

====================
Here is a batman-adv bugfix:

 - avoid sending link-local multicast to multicast routers,
   by Linus Lüssing

* tag 'batadv-net-pullrequest-20220103' of git://git.open-mesh.org/linux-merge:
  batman-adv: mcast: don't send link-local multicast to mcast routers
====================

Link: https://lore.kernel.org/r/20220103171203.1124980-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-03 19:50:17 -08:00
Florian Fainelli
065e1ae02f Revert "net: phy: fixed_phy: Fix NULL vs IS_ERR() checking in __fixed_phy_register"
This reverts commit b45396afa4 ("net: phy:
fixed_phy: Fix NULL vs IS_ERR() checking in __fixed_phy_register")
since it prevents any system that uses a fixed PHY without a GPIO
descriptor from properly working:

[    5.971952] brcm-systemport 9300000.ethernet: failed to register fixed PHY
[    5.978854] brcm-systemport: probe of 9300000.ethernet failed with error -22
[    5.986047] brcm-systemport 9400000.ethernet: failed to register fixed PHY
[    5.992947] brcm-systemport: probe of 9400000.ethernet failed with error -22

Fixes: b45396afa4 ("net: phy: fixed_phy: Fix NULL vs IS_ERR() checking in __fixed_phy_register")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220103193453.1214961-1-f.fainelli@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-03 18:59:16 -08:00
Song Liu
46669e8616 md/raid1: fix missing bitmap update w/o WriteMostly devices
commit [1] causes missing bitmap updates when there isn't any WriteMostly
devices.

Detailed steps to reproduce by Norbert (which somehow didn't make to lore):

   # setup md10 (raid1) with two drives (1 GByte sparse files)
   dd if=/dev/zero of=disk1 bs=1024k seek=1024 count=0
   dd if=/dev/zero of=disk2 bs=1024k seek=1024 count=0

   losetup /dev/loop11 disk1
   losetup /dev/loop12 disk2

   mdadm --create /dev/md10 --level=1 --raid-devices=2 /dev/loop11 /dev/loop12

   # add bitmap (aka write-intent log)
   mdadm /dev/md10 --grow --bitmap=internal

   echo check > /sys/block/md10/md/sync_action

   root:# cat /sys/block/md10/md/mismatch_cnt
   0
   root:#

   # remove member drive disk2 (loop12)
   mdadm /dev/md10 -f loop12 ; mdadm /dev/md10 -r loop12

   # modify degraded md device
   dd if=/dev/urandom of=/dev/md10 bs=512 count=1

   # no blocks recorded as out of sync on the remaining member disk1/loop11
   root:# mdadm -X /dev/loop11 | grep Bitmap
             Bitmap : 16 bits (chunks), 0 dirty (0.0%)
   root:#

   # re-add disk2, nothing synced because of empty bitmap
   mdadm /dev/md10 --re-add /dev/loop12

   # check integrity again
   echo check > /sys/block/md10/md/sync_action

   # disk1 and disk2 are no longer in sync, reads return differend data
   root:# cat /sys/block/md10/md/mismatch_cnt
   128
   root:#

   # clean up
   mdadm -S /dev/md10
   losetup -d /dev/loop11
   losetup -d /dev/loop12
   rm disk1 disk2

Fix this by moving the WriteMostly check to the if condition for
alloc_behind_master_bio().

[1] commit fd3b6975e9 ("md/raid1: only allocate write behind bio for WriteMostly device")
Fixes: fd3b6975e9 ("md/raid1: only allocate write behind bio for WriteMostly device")
Cc: stable@vger.kernel.org # v5.12+
Cc: Guoqing Jiang <guoqing.jiang@linux.dev>
Cc: Jens Axboe <axboe@kernel.dk>
Reported-by: Norbert Warmuth <nwarmuth@t-online.de>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Song Liu <song@kernel.org>
2022-01-03 14:13:48 -08:00
David Ahern
95bdba23b5 ipv6: Do cleanup if attribute validation fails in multipath route
As Nicolas noted, if gateway validation fails walking the multipath
attribute the code should jump to the cleanup to free previously
allocated memory.

Fixes: 1ff15a710a ("ipv6: Check attribute length for RTA_GATEWAY when deleting multipath route")
Signed-off-by: David Ahern <dsahern@kernel.org>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20220103170555.94638-1-dsahern@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-03 10:04:42 -08:00
David Ahern
e30a845b03 ipv6: Continue processing multipath route even if gateway attribute is invalid
ip6_route_multipath_del loop continues processing the multipath
attribute even if delete of a nexthop path fails. For consistency,
do the same if the gateway attribute is invalid.

Fixes: 1ff15a710a ("ipv6: Check attribute length for RTA_GATEWAY when deleting multipath route")
Signed-off-by: David Ahern <dsahern@kernel.org>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20220103171911.94739-1-dsahern@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-03 10:02:00 -08:00
Gregory Fong
32e246b02f MAINTAINERS: update gpio-brcmstb maintainers
Add Doug and Florian as maintainers for gpio-brcmstb, and remove myself.

Signed-off-by: Gregory Fong <gregory.0xf0@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-01-03 10:53:02 +01:00
Steven Lee
e5a7431f5a gpio: gpio-aspeed-sgpio: Fix wrong hwirq base in irq handler
Each aspeed sgpio bank has 64 gpio pins(32 input pins and 32 output pins).
The hwirq base for each sgpio bank should be multiples of 64 rather than
multiples of 32.

Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-01-03 10:50:12 +01:00
Linus Torvalds
c9e6606c7f Linux 5.16-rc8 2022-01-02 14:23:25 -08:00
Linus Torvalds
24a0b22061 perf tools fixes for v5.16: 5th batch
- Fix TUI exit screen refresh race condition in 'perf top'.
 
 - Fix parsing of Intel PT VM time correlation arguments.
 
 - Honour CPU filtering command line request of a script's switch events in
   'perf script'.
 
 - Fix printing of switch events in Intel PT python script.
 
 - Fix duplicate alias events list printing in 'perf list', noticed on
   heterogeneous arm64 systems.
 
 - Fix return value of ids__new(), users expect NULL for failure, not
   ERR_PTR(-ENOMEM).
 
 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYdHBrgAKCRCyPKLppCJ+
 J8C0AQDT9JKQlNPMETD5F2leq0YB5O3wGKwMvgff0hyblArU7QD/Yq7d1XgMkshF
 lb2dEJfGIyClnrgtTo9nikraESM5JwE=
 =RTLi
 -----END PGP SIGNATURE-----

Merge tag 'perf-tools-fixes-for-v5.16-2022-01-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Fix TUI exit screen refresh race condition in 'perf top'.

 - Fix parsing of Intel PT VM time correlation arguments.

 - Honour CPU filtering command line request of a script's switch events
   in 'perf script'.

 - Fix printing of switch events in Intel PT python script.

 - Fix duplicate alias events list printing in 'perf list', noticed on
   heterogeneous arm64 systems.

 - Fix return value of ids__new(), users expect NULL for failure, not
   ERR_PTR(-ENOMEM).

* tag 'perf-tools-fixes-for-v5.16-2022-01-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf top: Fix TUI exit screen refresh race condition
  perf pmu: Fix alias events list
  perf scripts python: intel-pt-events.py: Fix printing of switch events
  perf script: Fix CPU filtering of a script's switch events
  perf intel-pt: Fix parsing of VM time correlation arguments
  perf expr: Fix return value of ids__new()
2022-01-02 14:09:03 -08:00
Markus Koch
1ef5e1d0dc net/fsl: Remove leftover definition in xgmac_mdio
commit 26eee0210a ("net/fsl: fix a bug in xgmac_mdio") fixed a bug in
the QorIQ mdio driver but left the (now unused) incorrect bit definition
for MDIO_DATA_BSY in the code. This commit removes it.

Signed-off-by: Markus Koch <markus@notsyncing.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-02 18:43:42 +00:00
Linus Torvalds
859431ac11 Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
 "Better input validation for compat ioctls and a documentation bugfix
  for 5.16"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  Docs: Fixes link to I2C specification
  i2c: validate user data in compat ioctl
2022-01-02 10:36:09 -08:00
Linus Torvalds
1286cc4893 - Use the proper CONFIG symbol in a preprocessor check.
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmHRcK4ACgkQEsHwGGHe
 VUqPjw//bcEdZomdrSR9fJTWC33sKzwBHySxeBV/pIF3/TEu1r9kW0HWy1hqFnMV
 PmRNRLKzBY/nLmh9EKyYindj2V/+jNMIRSTlkSQxWRNuqTI/LFnOK4ufknqzF17M
 3PNGo7mgVo//bnPW+kedTwtKPBTq4TxHUbwnexOd51qbQM6X1fByR0KeR2sOkyeG
 DW7cTeH3pDzA5YLb6VkzaGhZzQ59Fmh7sHFOlDq4Lfij2F6Le2Vo2/Q0hGmsUDMT
 BAzUJN3kgf6FSXxg0LZ2vezYI7t00lEMUMwqD0Jrr0laBBFZg15qlpO5B6OUJWJu
 WjfCwcmBrfyjafFeinQqnqIMd5KHrjuIqBpW3MHj8sx5/3uGjVJw/fk7hn64m6Vr
 AG8qjQNs0kdad7RAaeIRpxRyDmOmiCShFNHaruz40ztNcV3IZ3/1YANJBLU/jydy
 xnBCZoGespPyNqu9MPYKaJo5BftQkx5Kwp2UcnJu6C4/pDlEGRDmIhV0hW8Owu26
 Vm/g5v/oFK35Q4bZDec0h5k4VIfN9WO2+Fu7vH/BF0v9hRz4TxGTlI2Ne4dOBbdX
 VaAyXHTNmJOUvnLMejFJWt52sk4ze2CmQ17GN6Gu4F5cm1wYYrj7vpr9SDGQmRcu
 +zzNOSNJXVA0UemiEbWLoaOBDxRaOQDf7Fi+rDlo77oPElLdulc=
 =mJVP
 -----END PGP SIGNATURE-----

Merge tag 'x86_urgent_for_v5.16_rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 fix from Borislav Petkov:

 - Use the proper CONFIG symbol in a preprocessor check.

* tag 'x86_urgent_for_v5.16_rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/build: Use the proper name CONFIG_FW_LOADER
2022-01-02 09:02:54 -08:00
Thomas Toye
29262e1f77 rndis_host: support Hytera digital radios
Hytera makes a range of digital (DMR) radios. These radios can be
programmed to a allow a computer to control them over Ethernet over USB,
either using NCM or RNDIS.

This commit adds support for RNDIS for Hytera radios. I tested with a
Hytera PD785 and a Hytera MD785G. When these radios are programmed to
set up a Radio to PC Network using RNDIS, an USB interface will be added
with class 2 (Communications), subclass 2 (Abstract Modem Control) and
an interface protocol of 255 ("vendor specific" - lsusb even hints "MSFT
RNDIS?").

This patch is similar to the solution of this StackOverflow user, but
that only works for the Hytera MD785:
https://stackoverflow.com/a/53550858

To use the "Radio to PC Network" functionality of Hytera DMR radios, the
radios need to be programmed correctly in CPS (Hytera's Customer
Programming Software). "Forward to PC" should be checked in "Network"
(under "General Setting" in "Conventional") and the "USB Network
Communication Protocol" should be set to RNDIS.

Signed-off-by: Thomas Toye <thomas@toye.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-02 16:12:45 +00:00
yaowenbin
64f18d2d04 perf top: Fix TUI exit screen refresh race condition
When the following command is executed several times, a coredump file is
generated.

	$ timeout -k 9 5 perf top -e task-clock
	*******
	*******
	*******
	0.01%  [kernel]                  [k] __do_softirq
	0.01%  libpthread-2.28.so        [.] __pthread_mutex_lock
	0.01%  [kernel]                  [k] __ll_sc_atomic64_sub_return
	double free or corruption (!prev) perf top --sort comm,dso
	timeout: the monitored command dumped core

When we terminate "perf top" using sending signal method,
SLsmg_reset_smg() called. SLsmg_reset_smg() resets the SLsmg screen
management routines by freeing all memory allocated while it was active.

However SLsmg_reinit_smg() maybe be called by another thread.

SLsmg_reinit_smg() will free the same memory accessed by
SLsmg_reset_smg(), thus it results in a double free.

SLsmg_reinit_smg() is called already protected by ui__lock, so we fix
the problem by adding pthread_mutex_trylock of ui__lock when calling
SLsmg_reset_smg().

Signed-off-by: Wenyu Liu <liuwenyu7@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: wuxu.wu@huawei.com
Link: http://lore.kernel.org/lkml/a91e3943-7ddc-f5c0-a7f5-360f073c20e6@huawei.com
Signed-off-by: Hewenliang <hewenliang4@huawei.com>
Signed-off-by: yaowenbin <yaowenbin1@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-01-02 11:46:44 -03:00
John Garry
e0257a01d6 perf pmu: Fix alias events list
Commit 0e0ae87422 ("perf list: Display hybrid PMU events with cpu
type") changes the event list for uncore PMUs or arm64 heterogeneous CPU
systems, such that duplicate aliases are incorrectly listed per PMU
(which they should not be), like:

  # perf list
  ...
  unc_cbo_cache_lookup.any_es
  [Unit: uncore_cbox L3 Lookup any request that access cache and found
  line in E or S-state]
  unc_cbo_cache_lookup.any_es
  [Unit: uncore_cbox L3 Lookup any request that access cache and found
  line in E or S-state]
  unc_cbo_cache_lookup.any_i
  [Unit: uncore_cbox L3 Lookup any request that access cache and found
  line in I-state]
  unc_cbo_cache_lookup.any_i
  [Unit: uncore_cbox L3 Lookup any request that access cache and found
  line in I-state]
  ...

Notice how the events are listed twice.

The named commit changed how we remove duplicate events, in that events
for different PMUs are not treated as duplicates. I suppose this is to
handle how "Each hybrid pmu event has been assigned with a pmu name".

Fix PMU alias listing by restoring behaviour to remove duplicates for
non-hybrid PMUs.

Fixes: 0e0ae87422 ("perf list: Display hybrid PMU events with cpu type")
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/1640103090-140490-1-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-01-02 11:29:05 -03:00
Xin Long
f9d31c4cf4 sctp: hold endpoint before calling cb in sctp_transport_lookup_process
The same fix in commit 5ec7d18d18 ("sctp: use call_rcu to free endpoint")
is also needed for dumping one asoc and sock after the lookup.

Fixes: 86fdb3448c ("sctp: ensure ep is not destroyed before doing the dump")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-02 12:46:41 +00:00
David S. Miller
5b40d10b60 Merge branch 'ena-fixes'
Arthur Kiyanovski says:

====================
ENA driver bug fixes

Patchset V2 chages:
-------------------
Updated SHA1 of Fixes tag in patch 3/3 to be 12 digits long

Original cover letter:
----------------------
ENA driver bug fixes
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-02 12:45:13 +00:00
Arthur Kiyanovski
5055dc0348 net: ena: Fix error handling when calculating max IO queues number
The role of ena_calc_max_io_queue_num() is to return the number
of queues supported by the device, which means the return value
should be >=0.

The function that calls ena_calc_max_io_queue_num(), checks
the return value. If it is 0, it means the device reported
it supports 0 IO queues. This case is considered an error
and is handled by the calling function accordingly.

However the current implementation of ena_calc_max_io_queue_num()
is wrong, since when it detects the device supports 0 IO queues,
it returns -EFAULT.

In such a case the calling function doesn't detect the error,
and therefore doesn't handle it.

This commit changes ena_calc_max_io_queue_num() to return 0
in case the device reported it supports 0 queues, allowing the
calling function to properly handle the error case.

Fixes: 736ce3f414 ("net: ena: make ethtool -l show correct max number of queues")
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-02 12:45:13 +00:00
Arthur Kiyanovski
cb3d4f98f0 net: ena: Fix wrong rx request id by resetting device
A wrong request id received from the device is a sign that
something is wrong with it, therefore trigger a device reset.

Also add some debug info to the "Page is NULL" print to make
it easier to debug.

Fixes: 1738cd3ed3 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-02 12:45:13 +00:00
Arthur Kiyanovski
c255a34e02 net: ena: Fix undefined state when tx request id is out of bounds
ena_com_tx_comp_req_id_get() checks the req_id of a received completion,
and if it is out of bounds returns -EINVAL. This is a sign that
something is wrong with the device and it needs to be reset.

The current code does not reset the device in this case, which leaves
the driver in an undefined state, where this completion is not properly
handled.

This commit adds a call to handle_invalid_req_id() in ena_clean_tx_irq()
and ena_clean_xdp_irq() which resets the device to fix the issue.

This commit also removes unnecessary request id checks from
validate_tx_req_id() and validate_xdp_req_id(). This check is unneeded
because it was already performed in ena_com_tx_comp_req_id_get(), which
is called right before these functions.

Fixes: 548c4940b9 ("net: ena: Implement XDP_TX action")
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-02 12:45:13 +00:00
Gagan Kumar
ae81de7378 mctp: Remove only static neighbour on RTM_DELNEIGH
Add neighbour source flag in mctp_neigh_remove(...) to allow removal of
only static neighbours.

This should be a no-op change and might be useful later when mctp can
have MCTP_NEIGH_DISCOVER neighbours.

Signed-off-by: Gagan Kumar <gagan1kumar.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-02 12:18:14 +00:00
Linus Lüssing
938f2e0b57 batman-adv: mcast: don't send link-local multicast to mcast routers
The addition of routable multicast TX handling introduced a
bug/regression for packets with a link-local multicast destination:
These packets would be sent to all batman-adv nodes with a multicast
router and to all batman-adv nodes with an old version without multicast
router detection.

This even disregards the batman-adv multicast fanout setting, which can
potentially lead to an unwanted, high number of unicast transmissions or
even congestion.

Fixing this by avoiding to send link-local multicast packets to nodes in
the multicast router list.

Fixes: 11d458c1cb ("batman-adv: mcast: apply optimizations for routable packets, too")
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2022-01-02 09:31:17 +01:00
Linus Torvalds
278218f677 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
 "Two small fixups for spaceball joystick driver and appletouch touchpad
  driver"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: spaceball - fix parsing of movement data packets
  Input: appletouch - initialize work before device registration
2022-01-01 10:21:49 -08:00
Haimin Zhang
d6d8683070 net ticp:fix a kernel-infoleak in __tipc_sendmsg()
struct tipc_socket_addr.ref has a 4-byte hole,and __tipc_getname() currently
copying it to user space,causing kernel-infoleak.

BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:121 [inline]
BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:121 [inline] lib/usercopy.c:33
BUG: KMSAN: kernel-infoleak in _copy_to_user+0x1c9/0x270 lib/usercopy.c:33 lib/usercopy.c:33
 instrument_copy_to_user include/linux/instrumented.h:121 [inline]
 instrument_copy_to_user include/linux/instrumented.h:121 [inline] lib/usercopy.c:33
 _copy_to_user+0x1c9/0x270 lib/usercopy.c:33 lib/usercopy.c:33
 copy_to_user include/linux/uaccess.h:209 [inline]
 copy_to_user include/linux/uaccess.h:209 [inline] net/socket.c:287
 move_addr_to_user+0x3f6/0x600 net/socket.c:287 net/socket.c:287
 __sys_getpeername+0x470/0x6b0 net/socket.c:1987 net/socket.c:1987
 __do_sys_getpeername net/socket.c:1997 [inline]
 __se_sys_getpeername net/socket.c:1994 [inline]
 __do_sys_getpeername net/socket.c:1997 [inline] net/socket.c:1994
 __se_sys_getpeername net/socket.c:1994 [inline] net/socket.c:1994
 __x64_sys_getpeername+0xda/0x120 net/socket.c:1994 net/socket.c:1994
 do_syscall_x64 arch/x86/entry/common.c:51 [inline]
 do_syscall_x64 arch/x86/entry/common.c:51 [inline] arch/x86/entry/common.c:82
 do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 arch/x86/entry/common.c:82
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Uninit was stored to memory at:
 tipc_getname+0x575/0x5e0 net/tipc/socket.c:757 net/tipc/socket.c:757
 __sys_getpeername+0x3b3/0x6b0 net/socket.c:1984 net/socket.c:1984
 __do_sys_getpeername net/socket.c:1997 [inline]
 __se_sys_getpeername net/socket.c:1994 [inline]
 __do_sys_getpeername net/socket.c:1997 [inline] net/socket.c:1994
 __se_sys_getpeername net/socket.c:1994 [inline] net/socket.c:1994
 __x64_sys_getpeername+0xda/0x120 net/socket.c:1994 net/socket.c:1994
 do_syscall_x64 arch/x86/entry/common.c:51 [inline]
 do_syscall_x64 arch/x86/entry/common.c:51 [inline] arch/x86/entry/common.c:82
 do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 arch/x86/entry/common.c:82
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Uninit was stored to memory at:
 msg_set_word net/tipc/msg.h:212 [inline]
 msg_set_destport net/tipc/msg.h:619 [inline]
 msg_set_word net/tipc/msg.h:212 [inline] net/tipc/socket.c:1486
 msg_set_destport net/tipc/msg.h:619 [inline] net/tipc/socket.c:1486
 __tipc_sendmsg+0x44fa/0x5890 net/tipc/socket.c:1486 net/tipc/socket.c:1486
 tipc_sendmsg+0xeb/0x140 net/tipc/socket.c:1402 net/tipc/socket.c:1402
 sock_sendmsg_nosec net/socket.c:704 [inline]
 sock_sendmsg net/socket.c:724 [inline]
 sock_sendmsg_nosec net/socket.c:704 [inline] net/socket.c:2409
 sock_sendmsg net/socket.c:724 [inline] net/socket.c:2409
 ____sys_sendmsg+0xe11/0x12c0 net/socket.c:2409 net/socket.c:2409
 ___sys_sendmsg net/socket.c:2463 [inline]
 ___sys_sendmsg net/socket.c:2463 [inline] net/socket.c:2492
 __sys_sendmsg+0x704/0x840 net/socket.c:2492 net/socket.c:2492
 __do_sys_sendmsg net/socket.c:2501 [inline]
 __se_sys_sendmsg net/socket.c:2499 [inline]
 __do_sys_sendmsg net/socket.c:2501 [inline] net/socket.c:2499
 __se_sys_sendmsg net/socket.c:2499 [inline] net/socket.c:2499
 __x64_sys_sendmsg+0xe2/0x120 net/socket.c:2499 net/socket.c:2499
 do_syscall_x64 arch/x86/entry/common.c:51 [inline]
 do_syscall_x64 arch/x86/entry/common.c:51 [inline] arch/x86/entry/common.c:82
 do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 arch/x86/entry/common.c:82
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Local variable skaddr created at:
 __tipc_sendmsg+0x2d0/0x5890 net/tipc/socket.c:1419 net/tipc/socket.c:1419
 tipc_sendmsg+0xeb/0x140 net/tipc/socket.c:1402 net/tipc/socket.c:1402

Bytes 4-7 of 16 are uninitialized
Memory access of size 16 starts at ffff888113753e00
Data copied to user address 0000000020000280

Reported-by: syzbot+cdbd40e0c3ca02cae3b7@syzkaller.appspotmail.com
Signed-off-by: Haimin Zhang <tcs_kernel@tencent.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Link: https://lore.kernel.org/r/1640918123-14547-1-git-send-email-tcs.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-31 18:37:08 -08:00
Jianguo Wu
5e75d0b215 selftests: net: udpgro_fwd.sh: explicitly checking the available ping feature
As Paolo pointed out, the result of ping IPv6 address depends on
the running distro. So explicitly checking the available ping feature,
as e.g. do the bareudp.sh self-tests.

Fixes: 8b3170e075 ("selftests: net: using ping6 for IPv6 in udpgro_fwd.sh")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Link: https://lore.kernel.org/r/825ee22b-4245-dbf7-d2f7-a230770d6e21@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-31 18:36:41 -08:00
Jakub Kicinski
0f1fe7b83b Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:

====================
pull-request: bpf 2021-12-31

We've added 2 non-merge commits during the last 14 day(s) which contain
a total of 2 files changed, 3 insertions(+), 3 deletions(-).

The main changes are:

1) Revert of an earlier attempt to fix xsk's poll() behavior where it
   turned out that the fix for a rare problem made it much worse in
   general, from Magnus Karlsson. (Fyi, Magnus mentioned that a proper
   fix is coming early next year, so the revert is mainly to avoid
   slipping the behavior into 5.16.)

2) Minor misc spell fix in BPF selftests, from Colin Ian King.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  bpf, selftests: Fix spelling mistake "tained" -> "tainted"
  Revert "xsk: Do not sleep in poll() when need_wakeup set"
====================

Link: https://lore.kernel.org/r/20211231160050.16105-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-31 18:35:54 -08:00
Mel Gorman
8008293888 mm: vmscan: reduce throttling due to a failure to make progress -fix
Hugh Dickins reported the following

	My tmpfs swapping load (tweaked to use huge pages more heavily
	than in real life) is far from being a realistic load: but it was
	notably slowed down by your throttling mods in 5.16-rc, and this
	patch makes it well again - thanks.

	But: it very quickly hit NULL pointer until I changed that last
	line to

        if (first_pgdat)
                consider_reclaim_throttle(first_pgdat, sc);

The likely issue is that huge pages are a major component of the test
workload.  When this is the case, first_pgdat may never get set if
compaction is ready to continue due to this check

        if (IS_ENABLED(CONFIG_COMPACTION) &&
            sc->order > PAGE_ALLOC_COSTLY_ORDER &&
            compaction_ready(zone, sc)) {
                sc->compaction_ready = true;
                continue;
        }

If this was true for every zone in the zonelist, first_pgdat would never
get set resulting in a NULL pointer exception.

Link: https://lkml.kernel.org/r/20211209095453.GM3366@techsingularity.net
Fixes: 1b4e3f26f9 ("mm: vmscan: Reduce throttling due to a failure to make progress")
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reported-by: Hugh Dickins <hughd@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Rik van Riel <riel@surriel.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-12-31 13:12:55 -08:00
Mel Gorman
1b4e3f26f9 mm: vmscan: Reduce throttling due to a failure to make progress
Mike Galbraith, Alexey Avramov and Darrick Wong all reported similar
problems due to reclaim throttling for excessive lengths of time.  In
Alexey's case, a memory hog that should go OOM quickly stalls for
several minutes before stalling.  In Mike and Darrick's cases, a small
memcg environment stalled excessively even though the system had enough
memory overall.

Commit 69392a403f ("mm/vmscan: throttle reclaim when no progress is
being made") introduced the problem although commit a19594ca4a
("mm/vmscan: increase the timeout if page reclaim is not making
progress") made it worse.  Systems at or near an OOM state that cannot
be recovered must reach OOM quickly and memcg should kill tasks if a
memcg is near OOM.

To address this, only stall for the first zone in the zonelist, reduce
the timeout to 1 tick for VMSCAN_THROTTLE_NOPROGRESS and only stall if
the scan control nr_reclaimed is 0, kswapd is still active and there
were excessive pages pending for writeback.  If kswapd has stopped
reclaiming due to excessive failures, do not stall at all so that OOM
triggers relatively quickly.  Similarly, if an LRU is simply congested,
only lightly throttle similar to NOPROGRESS.

Alexey's original case was the most straight forward

	for i in {1..3}; do tail /dev/zero; done

On vanilla 5.16-rc1, this test stalled heavily, after the patch the test
completes in a few seconds similar to 5.15.

Alexey's second test case added watching a youtube video while tail runs
10 times.  On 5.15, playback only jitters slightly, 5.16-rc1 stalls a
lot with lots of frames missing and numerous audio glitches.  With this
patch applies, the video plays similarly to 5.15.

[lkp@intel.com: Fix W=1 build warning]

Link: https://lore.kernel.org/r/99e779783d6c7fce96448a3402061b9dc1b3b602.camel@gmx.de
Link: https://lore.kernel.org/r/20211124011954.7cab9bb4@mail.inbox.lv
Link: https://lore.kernel.org/r/20211022144651.19914-1-mgorman@techsingularity.net
Link: https://lore.kernel.org/r/20211202150614.22440-1-mgorman@techsingularity.net
Link: https://linux-regtracking.leemhuis.info/regzbot/regression/20211124011954.7cab9bb4@mail.inbox.lv/
Reported-and-tested-by: Alexey Avramov <hakavlad@inbox.lv>
Reported-and-tested-by: Mike Galbraith <efault@gmx.de>
Reported-and-tested-by: Darrick J. Wong <djwong@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Hugh Dickins <hughd@google.com>
Tracked-by: Thorsten Leemhuis <regressions@leemhuis.info>
Fixes: 69392a403f ("mm/vmscan: throttle reclaim when no progress is being made")
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-12-31 11:17:07 -08:00
Linus Torvalds
f87bcc88f3 Merge branch 'akpm' (patches from Andrew)
Merge misc mm fixes from Andrew Morton:
 "2 patches.

  Subsystems affected by this patch series: mm (userfaultfd and damon)"

* akpm:
  mm/damon/dbgfs: fix 'struct pid' leaks in 'dbgfs_target_ids_write()'
  userfaultfd/selftests: fix hugetlb area allocations
2021-12-31 09:28:48 -08:00
Youquan Song
3376136300 x86/mce: Reduce number of machine checks taken during recovery
When any of the copy functions in arch/x86/lib/copy_user_64.S take a
fault, the fixup code copies the remaining byte count from %ecx to %edx
and unconditionally jumps to .Lcopy_user_handle_tail to continue the
copy in case any more bytes can be copied.

If the fault was #PF this may copy more bytes (because the page fault
handler might have fixed the fault). But when the fault is a machine
check the original copy code will have copied all the way to the poisoned
cache line. So .Lcopy_user_handle_tail will just take another machine
check for no good reason.

Every code path to .Lcopy_user_handle_tail comes from an exception fixup
path, so add a check there to check the trap type (in %eax) and simply
return the count of remaining bytes if the trap was a machine check.

Doing this reduces the number of machine checks taken during synthetic
tests from four to three.

As well as reducing the number of machine checks, this also allows
Skylake generation Xeons to recover some cases that currently fail. The
is because REP; MOVSB is only recoverable when source and destination
are well aligned and the byte count is large. That useless call to
.Lcopy_user_handle_tail may violate one or more of these conditions and
generate a fatal machine check.

  [ Tony: Add more details to commit message. ]
  [ bp: Fixup comment.
    Also, another tip patchset which is adding straight-line speculation
    mitigation changes the "ret" instruction to an all-caps macro "RET".
    But, since gas is case-insensitive, use "RET" in the newly added asm block
    already in order to simplify tip branch merging on its way upstream.
  ]

Signed-off-by: Youquan Song <youquan.song@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/YcTW5dh8yTGucDd+@agluck-desk2.amr.corp.intel.com
2021-12-31 18:22:32 +01:00
Linus Torvalds
e46227bf38 SCSI fixes on 20211231
Three fixes, all in drivers.  The lpfc one doesn't look exploitable,
 but nasty things could happen in string operations if mybuf ends up
 with an on stack unterminated string.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYc8YLiYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishdUhAQCVmqLx
 GhEK15Y8etJwMoj03I6hO5gChhQz6kk7pxXAVwD/e5LHrVVeq/WxjUnyrC1gx6sm
 iYHYbZ0UHotwbRpwU9k=
 =WAIf
 -----END PGP SIGNATURE-----

Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "Three fixes, all in drivers. The lpfc one doesn't look exploitable,
  but nasty things could happen in string operations if mybuf ends up
  with an on stack unterminated string"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: vmw_pvscsi: Set residual data length conditionally
  scsi: libiscsi: Fix UAF in iscsi_conn_get_param()/iscsi_conn_teardown()
  scsi: lpfc: Terminate string in lpfc_debugfs_nvmeio_trc_write()
2021-12-31 09:22:25 -08:00
SeongJae Park
ebb3f994dd mm/damon/dbgfs: fix 'struct pid' leaks in 'dbgfs_target_ids_write()'
DAMON debugfs interface increases the reference counts of 'struct pid's
for targets from the 'target_ids' file write callback
('dbgfs_target_ids_write()'), but decreases the counts only in DAMON
monitoring termination callback ('dbgfs_before_terminate()').

Therefore, when 'target_ids' file is repeatedly written without DAMON
monitoring start/termination, the reference count is not decreased and
therefore memory for the 'struct pid' cannot be freed.  This commit
fixes this issue by decreasing the reference counts when 'target_ids' is
written.

Link: https://lkml.kernel.org/r/20211229124029.23348-1-sj@kernel.org
Fixes: 4bc05954d0 ("mm/damon: implement a debugfs-based user space interface")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org>	[5.15+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-12-31 09:20:12 -08:00
Mike Kravetz
f5c7329718 userfaultfd/selftests: fix hugetlb area allocations
Currently, userfaultfd selftest for hugetlb as run from run_vmtests.sh
or any environment where there are 'just enough' hugetlb pages will
always fail with:

  testing events (fork, remap, remove):
		ERROR: UFFDIO_COPY error: -12 (errno=12, line=616)

The ENOMEM error code implies there are not enough hugetlb pages.
However, there are free hugetlb pages but they are all reserved.  There
is a basic problem with the way the test allocates hugetlb pages which
has existed since the test was originally written.

Due to the way 'cleanup' was done between different phases of the test,
this issue was masked until recently.  The issue was uncovered by commit
8ba6e86408 ("userfaultfd/selftests: reinitialize test context in each
test").

For the hugetlb test, src and dst areas are allocated as PRIVATE
mappings of a hugetlb file.  This means that at mmap time, pages are
reserved for the src and dst areas.  At the start of event testing (and
other tests) the src area is populated which results in allocation of
huge pages to fill the area and consumption of reserves associated with
the area.  Then, a child is forked to fault in the dst area.  Note that
the dst area was allocated in the parent and hence the parent owns the
reserves associated with the mapping.  The child has normal access to
the dst area, but can not use the reserves created/owned by the parent.
Thus, if there are no other huge pages available allocation of a page
for the dst by the child will fail.

Fix by not creating reserves for the dst area.  In this way the child
can use free (non-reserved) pages.

Also, MAP_PRIVATE of a file only makes sense if you are interested in
the contents of the file before making a COW copy.  The test does not do
this.  So, just use MAP_ANONYMOUS | MAP_HUGETLB to create an anonymous
hugetlb mapping.  There is no need to create a hugetlb file in the
non-shared case.

Link: https://lkml.kernel.org/r/20211217172919.7861-1-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-12-31 09:20:12 -08:00
David S. Miller
4760abaac6 Merge branch 'mpr-len-checks'
David Ahern says:

====================
net: Length checks for attributes within multipath routes

Add length checks for attributes within a multipath route (attributes
within RTA_MULTIPATH). Motivated by the syzbot report in patch 1 and
then expanded to other attributes as noted by Ido.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-31 14:32:00 +00:00
David Ahern
8bda81a4d4 lwtunnel: Validate RTA_ENCAP_TYPE attribute length
lwtunnel_valid_encap_type_attr is used to validate encap attributes
within a multipath route. Add length validation checking to the type.

lwtunnel_valid_encap_type_attr is called converting attributes to
fib{6,}_config struct which means it is used before fib_get_nhs,
ip6_route_multipath_add, and ip6_route_multipath_del - other
locations that use rtnh_ok and then nla_get_u16 on RTA_ENCAP_TYPE
attribute.

Fixes: 9ed59592e3 ("lwtunnel: fix autoload of lwt modules")

Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-31 14:31:59 +00:00
David Ahern
1ff15a710a ipv6: Check attribute length for RTA_GATEWAY when deleting multipath route
Make sure RTA_GATEWAY for IPv6 multipath route has enough bytes to hold
an IPv6 address.

Fixes: 6b9ea5a64e ("ipv6: fix multipath route replace error recovery")
Signed-off-by: David Ahern <dsahern@kernel.org>
Cc: Roopa Prabhu <roopa@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-31 14:31:59 +00:00
David Ahern
4619bcf913 ipv6: Check attribute length for RTA_GATEWAY in multipath route
Commit referenced in the Fixes tag used nla_memcpy for RTA_GATEWAY as
does the current nla_get_in6_addr. nla_memcpy protects against accessing
memory greater than what is in the attribute, but there is no check
requiring the attribute to have an IPv6 address. Add it.

Fixes: 51ebd31815 ("ipv6: add support of equal cost multipath (ECMP)")
Signed-off-by: David Ahern <dsahern@kernel.org>
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-31 14:31:59 +00:00
David Ahern
664b9c4b73 ipv4: Check attribute length for RTA_FLOW in multipath route
Make sure RTA_FLOW is at least 4B before using.

Fixes: 4e902c5741 ("[IPv4]: FIB configuration using struct fib_config")
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-31 14:31:59 +00:00
David Ahern
7a3429bace ipv4: Check attribute length for RTA_GATEWAY in multipath route
syzbot reported uninit-value:
============================================================
  BUG: KMSAN: uninit-value in fib_get_nhs+0xac4/0x1f80
  net/ipv4/fib_semantics.c:708
   fib_get_nhs+0xac4/0x1f80 net/ipv4/fib_semantics.c:708
   fib_create_info+0x2411/0x4870 net/ipv4/fib_semantics.c:1453
   fib_table_insert+0x45c/0x3a10 net/ipv4/fib_trie.c:1224
   inet_rtm_newroute+0x289/0x420 net/ipv4/fib_frontend.c:886

Add helper to validate RTA_GATEWAY length before using the attribute.

Fixes: 4e902c5741 ("[IPv4]: FIB configuration using struct fib_config")
Reported-by: syzbot+d4b9a2851cc3ce998741@syzkaller.appspotmail.com
Signed-off-by: David Ahern <dsahern@kernel.org>
Cc: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-31 14:31:59 +00:00
Alex Deucher
b95dc06af3 drm/amdgpu: disable runpm if we are the primary adapter
If we are the primary adapter (i.e., the one used by the firwmare
framebuffer), disable runtime pm.  This fixes a regression caused
by commit 55285e21f0 which results in the displays waking up
shortly after they go to sleep due to the device coming out of
runtime suspend and sending a hotplug uevent.

v2: squash in reworked fix from Evan

Fixes: 55285e21f0 ("fbdev/efifb: Release PCI device's runtime PM ref during FB destroy")
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=215203
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1840
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-31 08:57:45 -05:00
Alex Deucher
9a45ac2320 fbdev: fbmem: add a helper to determine if an aperture is used by a fw fb
Add a function for drivers to check if the a firmware initialized
fb is corresponds to their aperture.  This allows drivers to check if the
device corresponds to what the firmware set up as the display device.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=215203
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1840
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-31 08:57:45 -05:00
Evan Quan
eaa090538e drm/amd/pm: keep the BACO feature enabled for suspend
To pair with the workaround which always reset the ASIC in suspend.
Otherwise, the reset which relies on BACO will fail.

Fixes: daf8de0874 ("drm/amdgpu: always reset the asic in suspend (v2)")

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-31 08:56:21 -05:00