nfsd_lookup() takes an exclusive lock on the parent inode, but no
callers want the lock and it may not be needed at all if the
result is in the dcache.
Change nfsd_lookup_dentry() to not take the lock, and call
lookup_one_len_locked() which takes lock only if needed.
nfsd4_open() currently expects the lock to still be held, but that isn't
necessary as nfsd_validate_delegated_dentry() provides required
guarantees without the lock.
NOTE: NFSv4 requires directory changeinfo for OPEN even when a create
wasn't requested and no change happened. Now that nfsd_lookup()
doesn't use fh_lock(), we need to explicitly fill the attributes
when no create happens. A new fh_fill_both_attrs() is provided
for that task.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
On non-error paths, nfsd_link() calls fh_unlock() twice. This is safe
because fh_unlock() records that the unlock has been done and doesn't
repeat it.
However it makes the code a little confusing and interferes with changes
that are planned for directory locking.
So rearrange the code to ensure fh_unlock() is called exactly once if
fh_lock() was called.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Some error paths in nfsd_unlink() allow it to exit without unlocking the
directory. This is not a problem in practice as the directory will be
locked with an fh_put(), but it is untidy and potentially confusing.
This allows us to remove all the fh_unlock() calls that are immediately
after nfsd_unlink() calls.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
nfsd_create() usually returns with the directory still locked.
nfsd_symlink() usually returns with it unlocked. This is clumsy.
Until recently nfsd_create() needed to keep the directory locked until
ACLs and security label had been set. These are now set inside
nfsd_create() (in nfsd_setattr()) so this need is gone.
So change nfsd_create() and nfsd_symlink() to always unlock, and remove
any fh_unlock() calls that follow calls to these functions.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
pacl and dpacl pointers are added to struct nfsd_attrs, which requires
that we have an nfsd_attrs_free() function to free them.
Those nfsv4 functions that can set ACLs now set up these pointers
based on the passed in NFSv4 ACL.
nfsd_setattr() sets the acls as appropriate.
Errors are handled as with security labels.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
A single change for this cycle to simplify handling of the memory page
used as super block buffer during mount (from Fabio).
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCYuoYcQAKCRDdoc3SxdoY
dhWYAQDcDZIzcGFrKTpmmpPI9Ep6rCk64V1cIvTKOik+Hp3/8wEA+btduq8w2Wlo
rrCypMOPBIygJxi9h1kugcP41HJLTwo=
=InBn
-----END PGP SIGNATURE-----
Merge tag 'zonefs-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs
Pull zonefs update from Damien Le Moal:
"A single change for this cycle to simplify handling of the memory page
used as super block buffer during mount (from Fabio)"
* tag 'zonefs-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
zonefs: Call page_address() on page acquired with GFP_KERNEL flag
- Skip writeback for pages that are completely beyond EOF
- Minor code cleanups
-----BEGIN PGP SIGNATURE-----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=aDOK
-----END PGP SIGNATURE-----
Merge tag 'iomap-5.20-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull iomap updates from Darrick Wong:
"The most notable change in this first batch is that we no longer
schedule pages beyond i_size for writeback, preferring instead to let
truncate deal with those pages.
Next week, there may be a second pull request to remove
iomap_writepage from the other two filesystems (gfs2/zonefs) that use
iomap for buffered IO. This follows in the same vein as the recent
removal of writepage from XFS, since it hasn't been triggered in a few
years; it does nothing during direct reclaim; and as far as the people
who examined the patchset can tell, it's moving the codebase in the
right direction.
However, as it was a late addition to for-next, I'm holding off on
that section for another week of testing to see if anyone can come up
with a solid reason for holding off in the meantime.
Summary:
- Skip writeback for pages that are completely beyond EOF
- Minor code cleanups"
* tag 'iomap-5.20-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
dax: set did_zero to true when zeroing successfully
iomap: set did_zero to true when zeroing successfully
iomap: skip pages past eof in iomap_do_writepage()
-----BEGIN PGP SIGNATURE-----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=o20T
-----END PGP SIGNATURE-----
Merge tag 'affs-5.20-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull affs fix from David Sterba:
"One update to AFFS, switching away from the kmap/kmap_atomic API"
* tag 'affs-5.20-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
affs: use memcpy_to_page and remove replace kmap_atomic()
-----BEGIN PGP SIGNATURE-----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=sS1q
-----END PGP SIGNATURE-----
Merge tag 'for-5.20-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"This brings some long awaited changes, the send protocol bump,
otherwise lots of small improvements and fixes. The main core part is
reworking bio handling, cleaning up the submission and endio and
improving error handling.
There are some changes outside of btrfs adding helpers or updating
API, listed at the end of the changelog.
Features:
- sysfs:
- export chunk size, in debug mode add tunable for setting its size
- show zoned among features (was only in debug mode)
- show commit stats (number, last/max/total duration)
- send protocol updated to 2
- new commands:
- ability write larger data chunks than 64K
- send raw compressed extents (uses the encoded data ioctls),
ie. no decompression on send side, no compression needed on
receive side if supported
- send 'otime' (inode creation time) among other timestamps
- send file attributes (a.k.a file flags and xflags)
- this is first version bump, backward compatibility on send and
receive side is provided
- there are still some known and wanted commands that will be
implemented in the near future, another version bump will be
needed, however we want to minimize that to avoid causing
usability issues
- print checksum type and implementation at mount time
- don't print some messages at mount (mentioned as people asked about
it), we want to print messages namely for new features so let's
make some space for that
- big metadata - this has been supported for a long time and is
not a feature that's worth mentioning
- skinny metadata - same reason, set by default by mkfs
Performance improvements:
- reduced amount of reserved metadata for delayed items
- when inserted items can be batched into one leaf
- when deleting batched directory index items
- when deleting delayed items used for deletion
- overall improved count of files/sec, decreased subvolume lock
contention
- metadata item access bounds checker micro-optimized, with a few
percent of improved runtime for metadata-heavy operations
- increase direct io limit for read to 256 sectors, improved
throughput by 3x on sample workload
Notable fixes:
- raid56
- reduce parity writes, skip sectors of stripe when there are no
data updates
- restore reading from on-disk data instead of using stripe cache,
this reduces chances to damage correct data due to RMW cycle
- refuse to replay log with unknown incompat read-only feature bit
set
- zoned
- fix page locking when COW fails in the middle of allocation
- improved tracking of active zones, ZNS drives may limit the
number and there are ENOSPC errors due to that limit and not
actual lack of space
- adjust maximum extent size for zone append so it does not cause
late ENOSPC due to underreservation
- mirror reading error messages show the mirror number
- don't fallback to buffered IO for NOWAIT direct IO writes, we don't
have the NOWAIT semantics for buffered io yet
- send, fix sending link commands for existing file paths when there
are deleted and created hardlinks for same files
- repair all mirrors for profiles with more than 1 copy (raid1c34)
- fix repair of compressed extents, unify where error detection and
repair happen
Core changes:
- bio completion cleanups
- don't double defer compression bios
- simplify endio workqueues
- add more data to btrfs_bio to avoid allocation for read requests
- rework bio error handling so it's same what block layer does,
the submission works and errors are consumed in endio
- when asynchronous bio offload fails fall back to synchronous
checksum calculation to avoid errors under writeback or memory
pressure
- new trace points
- raid56 events
- ordered extent operations
- super block log_root_transid deprecated (never used)
- mixed_backref and big_metadata sysfs feature files removed, they've
been default for sufficiently long time, there are no known users
and mixed_backref could be confused with mixed_groups
Non-btrfs changes, API updates:
- minor highmem API update to cover const arguments
- switch all kmap/kmap_atomic to kmap_local
- remove redundant flush_dcache_page()
- address_space_operations::writepage callback removed
- add bdev_max_segments() helper"
* tag 'for-5.20-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (163 commits)
btrfs: don't call btrfs_page_set_checked in finish_compressed_bio_read
btrfs: fix repair of compressed extents
btrfs: remove the start argument to check_data_csum and export
btrfs: pass a btrfs_bio to btrfs_repair_one_sector
btrfs: simplify the pending I/O counting in struct compressed_bio
btrfs: repair all known bad mirrors
btrfs: merge btrfs_dev_stat_print_on_error with its only caller
btrfs: join running log transaction when logging new name
btrfs: simplify error handling in btrfs_lookup_dentry
btrfs: send: always use the rbtree based inode ref management infrastructure
btrfs: send: fix sending link commands for existing file paths
btrfs: send: introduce recorded_ref_alloc and recorded_ref_free
btrfs: zoned: wait until zone is finished when allocation didn't progress
btrfs: zoned: write out partially allocated region
btrfs: zoned: activate necessary block group
btrfs: zoned: activate metadata block group on flush_space
btrfs: zoned: disable metadata overcommit for zoned
btrfs: zoned: introduce space_info->active_total_bytes
btrfs: zoned: finish least available block group on data bg allocation
btrfs: let can_allocate_chunk return error
...
Remove the obsolete 'efivars' sysfs based interface to the EFI variable
store, now that all users have moved to the efivarfs pseudo file system,
which was created ~10 years ago to address some fundamental shortcomings
in the sysfs based driver.
Move the 'business logic' related to which EFI variables are important
and may affect the boot flow from the efivars support layer into the
efivarfs pseudo file system, so it is no longer exposed to other parts
of the kernel.
-----BEGIN PGP SIGNATURE-----
iQGzBAABCgAdFiEE+9lifEBpyUIVN1cpw08iOZLZjyQFAmLhuYIACgkQw08iOZLZ
jyRYYgwAwUvbFtBL+uOTB+jynOq1MkM1xrNSeEgzPyLhh7CXSa/e+48XqpQjCUxY
8HNqDvd4toiCeVKp25AO+FPrQBjT7NdyjnwGMP3DLkGCOSIrVqVJ/2OmbOY52Kzy
z1qbF2+7ak1TUsGzMnJHVDB+baGnUlZ39DuR6IAWstM9tkH/QEnRJV+ejS4h7jdN
XW42/M96mAYFfT4Q4gs1HJMPWLP22xoEbnb9SkOyFCB2tHDjrY94CqH8L7Ee1DgA
7sc2cAZ2mPlS8Rbs8NY8IA/LpN4tRu2EhbIxtmKMRgXA88aTKcsub9Tq9RXxzE/x
BpkH77mGbSBSrntg0gskKCrYGyJaGS9EYnHVy5HPU8hJagK295NmO3c/trHTb90Z
1RZClYsIUbNXe06e9rdk8w8Ozn+7ABstxzLCvj2MThtTBnAbjU0kQ9VeD0xwMvOp
EaF6D6tbEmHrZkGtKP2WEyOZm0tF2I3OP1U9LzjyTpvsIOINhqfVozlhTB6pU5YE
kW9E59i+
=VVQ6
-----END PGP SIGNATURE-----
Merge tag 'efi-efivars-removal-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull efivars sysfs interface removal from Ard Biesheuvel:
"Remove the obsolete 'efivars' sysfs based interface to the EFI
variable store, now that all users have moved to the efivarfs pseudo
file system, which was created ~10 years ago to address some
fundamental shortcomings in the sysfs based driver.
Move the 'business logic' related to which EFI variables are important
and may affect the boot flow from the efivars support layer into the
efivarfs pseudo file system, so it is no longer exposed to other parts
of the kernel"
* tag 'efi-efivars-removal-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: vars: Move efivar caching layer into efivarfs
efi: vars: Switch to new wrapper layer
efi: vars: Remove deprecated 'efivars' sysfs interface
- Enable mirrored memory for arm64
- Fix up several abuses of the efivar API
- Refactor the efivar API in preparation for moving the 'business logic'
part of it into efivarfs
- Enable ACPI PRM on arm64
-----BEGIN PGP SIGNATURE-----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=zI0R
-----END PGP SIGNATURE-----
Merge tag 'efi-next-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
- Enable mirrored memory for arm64
- Fix up several abuses of the efivar API
- Refactor the efivar API in preparation for moving the 'business
logic' part of it into efivarfs
- Enable ACPI PRM on arm64
* tag 'efi-next-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: (24 commits)
ACPI: Move PRM config option under the main ACPI config
ACPI: Enable Platform Runtime Mechanism(PRM) support on ARM64
ACPI: PRM: Change handler_addr type to void pointer
efi: Simplify arch_efi_call_virt() macro
drivers: fix typo in firmware/efi/memmap.c
efi: vars: Drop __efivar_entry_iter() helper which is no longer used
efi: vars: Use locking version to iterate over efivars linked lists
efi: pstore: Omit efivars caching EFI varstore access layer
efi: vars: Add thin wrapper around EFI get/set variable interface
efi: vars: Don't drop lock in the middle of efivar_init()
pstore: Add priv field to pstore_record for backend specific use
Input: applespi - avoid efivars API and invoke EFI services directly
selftests/kexec: remove broken EFI_VARS secure boot fallback check
brcmfmac: Switch to appropriate helper to load EFI variable contents
iwlwifi: Switch to proper EFI variable store interface
media: atomisp_gmin_platform: stop abusing efivar API
efi: efibc: avoid efivar API for setting variables
efi: avoid efivars layer when loading SSDTs from variables
efi: Correct comment on efi_memmap_alloc
memblock: Disable mirror feature if kernelcore is not specified
...
One of the goals is to reduce the overhead of using ->read_iter()
and ->write_iter() instead of ->read()/->write(); new_sync_{read,write}()
has a surprising amount of overhead, in particular inside iocb_flags().
That's why the beginning of the series is in this pile; it's not directly
iov_iter-related, but it's a part of the same work...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCYurGOQAKCRBZ7Krx/gZQ
6ysyAP91lvBfMRepcxpd9kvtuzWkU8A3rfSziZZteEHANB9Q7QEAiPn2a2OjWkcZ
uAyUWfCkHCNx+dSMkEvUgR5okQ0exAM=
=9UCV
-----END PGP SIGNATURE-----
Merge tag 'pull-work.iov_iter-base' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs iov_iter updates from Al Viro:
"Part 1 - isolated cleanups and optimizations.
One of the goals is to reduce the overhead of using ->read_iter() and
->write_iter() instead of ->read()/->write().
new_sync_{read,write}() has a surprising amount of overhead, in
particular inside iocb_flags(). That's the explanation for the
beginning of the series is in this pile; it's not directly
iov_iter-related, but it's a part of the same work..."
* tag 'pull-work.iov_iter-base' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
first_iovec_segment(): just return address
iov_iter: massage calling conventions for first_{iovec,bvec}_segment()
iov_iter: first_{iovec,bvec}_segment() - simplify a bit
iov_iter: lift dealing with maxpages out of first_{iovec,bvec}_segment()
iov_iter_get_pages{,_alloc}(): cap the maxsize with MAX_RW_COUNT
iov_iter_bvec_advance(): don't bother with bvec_iter
copy_page_{to,from}_iter(): switch iovec variants to generic
keep iocb_flags() result cached in struct file
iocb: delay evaluation of IS_SYNC(...) until we want to check IOCB_DSYNC
struct file: use anonymous union member for rcuhead and llist
btrfs: use IOMAP_DIO_NOSYNC
teach iomap_dio_rw() to suppress dsync
No need of likely/unlikely on calls of check_copy_size()
sure preemption is disabled in start_dir_add()/ end_dir_add() sections (on
non-RT it's automatic, on RT it needs to to be done explicitly) and moving
wakeups from __d_lookup_done() inside of such to the end of those sections.
Wakeups can be safely delayed for as long as ->d_lock on in-lookup
dentry is held; proving that has caught a bug in d_add_ci() that allows
memory corruption when sufficiently bogus ntfs (or case-insensitive xfs)
image is mounted. Easily fixed, fortunately.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCYurAlAAKCRBZ7Krx/gZQ
6x0mAP9JI80PC/lkYLda+AJ7NmweorBDwrOxzB34biXtyhYDDQEAvdrV07LUkETM
FDN0+jgSpUikcs/kz5NxVBPRRN+RRAY=
=qpTA
-----END PGP SIGNATURE-----
Merge tag 'pull-work.dcache' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs dcache updates from Al Viro:
"The main part here is making parallel lookups safe for RT - making
sure preemption is disabled in start_dir_add()/ end_dir_add() sections
(on non-RT it's automatic, on RT it needs to to be done explicitly)
and moving wakeups from __d_lookup_done() inside of such to the end of
those sections.
Wakeups can be safely delayed for as long as ->d_lock on in-lookup
dentry is held; proving that has caught a bug in d_add_ci() that
allows memory corruption when sufficiently bogus ntfs (or
case-insensitive xfs) image is mounted. Easily fixed, fortunately"
* tag 'pull-work.dcache' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs/dcache: Move wakeup out of i_seq_dir write held region.
fs/dcache: Move the wakeup from __d_lookup_done() to the caller.
fs/dcache: Disable preemption on i_dir_seq write side on PREEMPT_RT
d_add_ci(): make sure we don't miss d_lookup_done()
magical no_llseek thing and makes checks consistent. In particular,
ad-hoc "can we do splice via internal pipe" checks got saner (and
somewhat more permissive, which is what Jason had been after, AFAICT)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCYug2xgAKCRBZ7Krx/gZQ
6wxWAQDqeg+xMq2FGPXmgjCa+Cp3PXH96Lp6f3hHzakIDx+t8gEAxvuiXAD22Mct
6S1SKuGj0iDIuM4L7hUiWTiY/bDXSAc=
=3EC/
-----END PGP SIGNATURE-----
Merge tag 'pull-work.lseek' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs lseek updates from Al Viro:
"Jason's lseek series.
Saner handling of 'lseek should fail with ESPIPE' - this gets rid of
the magical no_llseek thing and makes checks consistent.
In particular, the ad-hoc "can we do splice via internal pipe" checks
got saner (and somewhat more permissive, which is what Jason had been
after, AFAICT)"
* tag 'pull-work.lseek' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: remove no_llseek
fs: check FMODE_LSEEK to control internal pipe splicing
vfio: do not set FMODE_LSEEK flag
dma-buf: remove useless FMODE_LSEEK flag
fs: do not compare against ->llseek
fs: clear or set FMODE_LSEEK based on llseek function
the next dentry in nameidata simplifies life considerably,
especially if we delay fetching ->d_inode until step_into().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCYug0NQAKCRBZ7Krx/gZQ
66TIAQDziGCTjwvyzm+E/HDcWNl2LjZ4kbsuL3yv2DTW9jExyAD/UuptUgy2RKT1
RfJET/hnPhlIbWxbjhYLRtIj8QpcUAY=
=II7C
-----END PGP SIGNATURE-----
Merge tag 'pull-work.namei' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs namei updates from Al Viro:
"RCU pathwalk cleanups.
Storing sampled ->d_seq of the next dentry in nameidata simplifies
life considerably, especially if we delay fetching ->d_inode until
step_into()"
* tag 'pull-work.namei' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
step_into(): move fetching ->d_inode past handle_mounts()
lookup_fast(): don't bother with inode
follow_dotdot{,_rcu}(): don't bother with inode
step_into(): lose inode argument
namei: stash the sampled ->d_seq into nameidata
namei: move clearing LOOKUP_RCU towards rcu_read_unlock()
switch try_to_unlazy_next() to __legitimize_mnt()
follow_dotdot{,_rcu}(): change calling conventions
namei: get rid of pointless unlikely(read_seqcount_retry(...))
__follow_mount_rcu(): verify that mount_lock remains unchanged
- Fix an accounting bug that made NR_FILE_DIRTY grow without limit
when running xfstests
- Convert more of mpage to use folios
- Remove add_to_page_cache() and add_to_page_cache_locked()
- Convert find_get_pages_range() to filemap_get_folios()
- Improvements to the read_cache_page() family of functions
- Remove a few unnecessary checks of PageError
- Some straightforward filesystem conversions to use folios
- Split PageMovable users out from address_space_operations into their
own movable_operations
- Convert aops->migratepage to aops->migrate_folio
- Remove nobh support (Christoph Hellwig)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAmLpViQACgkQDpNsjXcp
gj5pBgf/f3+K7Hi3qw7aYQCYJQ7IA/bLyE/DLWI59kuiao6wDSve40B9YH9X++Ha
mRLp55bkQS+bwS2xa4jlqrIDJzAfNoWlXaXZHUXGL1C/52ChTF6jaH2cvO9PVlDS
7fLv1hy2LwiIdzpKJkUW7T+kcQGj3QLKqtQ4x8zD0LGMg055yvt/qndHSUi41nWT
/58+6W8Sk4vvRgkpeChFzF1lGLy00+FGT8y5V2kM9uRliFQ7XPCwqB2a3e5jbW6z
C1NXQmRnopCrnOT1TFIhK3DyX6MDIWV5qcikNAmCKFb9fQFPmjDLPt9iSoMGjw2M
Z+UVhJCaU3ISccd0DG5Ra/vzs9/O9Q==
=DgUi
-----END PGP SIGNATURE-----
Merge tag 'folio-6.0' of git://git.infradead.org/users/willy/pagecache
Pull folio updates from Matthew Wilcox:
- Fix an accounting bug that made NR_FILE_DIRTY grow without limit
when running xfstests
- Convert more of mpage to use folios
- Remove add_to_page_cache() and add_to_page_cache_locked()
- Convert find_get_pages_range() to filemap_get_folios()
- Improvements to the read_cache_page() family of functions
- Remove a few unnecessary checks of PageError
- Some straightforward filesystem conversions to use folios
- Split PageMovable users out from address_space_operations into
their own movable_operations
- Convert aops->migratepage to aops->migrate_folio
- Remove nobh support (Christoph Hellwig)
* tag 'folio-6.0' of git://git.infradead.org/users/willy/pagecache: (78 commits)
fs: remove the NULL get_block case in mpage_writepages
fs: don't call ->writepage from __mpage_writepage
fs: remove the nobh helpers
jfs: stop using the nobh helper
ext2: remove nobh support
ntfs3: refactor ntfs_writepages
mm/folio-compat: Remove migration compatibility functions
fs: Remove aops->migratepage()
secretmem: Convert to migrate_folio
hugetlb: Convert to migrate_folio
aio: Convert to migrate_folio
f2fs: Convert to filemap_migrate_folio()
ubifs: Convert to filemap_migrate_folio()
btrfs: Convert btrfs_migratepage to migrate_folio
mm/migrate: Add filemap_migrate_folio()
mm/migrate: Convert migrate_page() to migrate_folio()
nfs: Convert to migrate_folio
btrfs: Convert btree_migratepage to migrate_folio
mm/migrate: Convert expected_page_refs() to folio_expected_refs()
mm/migrate: Convert buffer_migrate_page() to buffer_migrate_folio()
...
Function ni_ins_new_attr now returns ERR_PTR(err),
so we check it now in other functions like ni_expand_mft_list
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Added comments to code
Added new function run_clone to make a copy of run
Added done and undo labels for restoring after errors
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
There are repetitive steps in case of bad inode
This commit wraps them in function
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Added some comments in frecord.c for more context.
Also changed run_lookup to static because it's an internal function.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
In some cases xattr is too fragmented,
so we need to load it before writing.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
In some cases we need to return ENOSPC
Fixes xfstest generic/213
Fixes: 114346978c ("fs/ntfs3: Check new size for limits")
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
ntfs_set_ea can fail with NOSPC, so we don't need to
change mode in this situation.
Fixes xfstest generic/449
Fixes: be71b5cba2 ("fs/ntfs3: Add attrib operations")
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
This function always returns 0, and ignores the nofail boolean. Drop the
nofail argument, make the function void return and fix up the callers.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
This fixes a race between changing the ext4 superblock uuid and operations
like mounting, resizing, changing features, etc.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jeremy Bongio <bongiojp@gmail.com>
Link: https://lore.kernel.org/r/20220721224422.438351-1-bongiojp@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch avoids an attempt to resize the filesystem to an
unaligned cluster boundary. An online resize to a size that is not
integral to cluster size results in the last iteration attempting to
grow the fs by a negative amount, which trips a BUG_ON and leaves the fs
with a corrupted in-memory superblock.
Signed-off-by: Oleg Kiselev <okiselev@amazon.com>
Link: https://lore.kernel.org/r/0E92A0AB-4F16-4F1A-94B7-702CC6504FDE@amazon.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch avoids doing an O(n**2)-complexity walk through every flex group.
Instead, it uses the already computed overhead information for the newly
allocated space, and simply adds it to the previously calculated
overhead stored in the superblock. This drastically reduces the time
taken to resize very large bigalloc filesystems (from 3+ hours for a
64TB fs down to milliseconds).
Signed-off-by: Oleg Kiselev <okiselev@amazon.com>
Link: https://lore.kernel.org/r/CE4F359F-4779-45E6-B6A9-8D67FDFF5AE2@amazon.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Block range to free is validated in ext4_free_blocks() using
ext4_inode_block_valid() and then it's passed to ext4_mb_clear_bb().
However in some situations on bigalloc file system the range might be
adjusted after the validation in ext4_free_blocks() which can lead to
troubles on corrupted file systems such as one found by syzkaller that
resulted in the following BUG
kernel BUG at fs/ext4/ext4.h:3319!
PREEMPT SMP NOPTI
CPU: 28 PID: 4243 Comm: repro Kdump: loaded Not tainted 5.19.0-rc6+ #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1.fc35 04/01/2014
RIP: 0010:ext4_free_blocks+0x95e/0xa90
Call Trace:
<TASK>
? lock_timer_base+0x61/0x80
? __es_remove_extent+0x5a/0x760
? __mod_timer+0x256/0x380
? ext4_ind_truncate_ensure_credits+0x90/0x220
ext4_clear_blocks+0x107/0x1b0
ext4_free_data+0x15b/0x170
ext4_ind_truncate+0x214/0x2c0
? _raw_spin_unlock+0x15/0x30
? ext4_discard_preallocations+0x15a/0x410
? ext4_journal_check_start+0xe/0x90
? __ext4_journal_start_sb+0x2f/0x110
ext4_truncate+0x1b5/0x460
? __ext4_journal_start_sb+0x2f/0x110
ext4_evict_inode+0x2b4/0x6f0
evict+0xd0/0x1d0
ext4_enable_quotas+0x11f/0x1f0
ext4_orphan_cleanup+0x3de/0x430
? proc_create_seq_private+0x43/0x50
ext4_fill_super+0x295f/0x3ae0
? snprintf+0x39/0x40
? sget_fc+0x19c/0x330
? ext4_reconfigure+0x850/0x850
get_tree_bdev+0x16d/0x260
vfs_get_tree+0x25/0xb0
path_mount+0x431/0xa70
__x64_sys_mount+0xe2/0x120
do_syscall_64+0x5b/0x80
? do_user_addr_fault+0x1e2/0x670
? exc_page_fault+0x70/0x170
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7fdf4e512ace
Fix it by making sure that the block range is properly validated before
used every time it changes in ext4_free_blocks() or ext4_mb_clear_bb().
Link: https://syzkaller.appspot.com/bug?id=5266d464285a03cee9dbfda7d2452a72c3c2ae7c
Reported-by: syzbot+15cd994e273307bf5cfa@syzkaller.appspotmail.com
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Cc: Tadeusz Struk <tadeusz.struk@linaro.org>
Tested-by: Tadeusz Struk <tadeusz.struk@linaro.org>
Link: https://lore.kernel.org/r/20220714165903.58260-1-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Use the fact that entries with elevated refcount are not removed from
the hash and just move removal of the entry from the hash to the entry
freeing time. When doing this we also change the generic code to hold
one reference to the cache entry, not two of them, which makes code
somewhat more obvious.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220712105436.32204-10-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently when we decide to reuse xattr block we detect the case when
the last reference to xattr block is being dropped at the same time and
cancel the reuse attempt. Convert ext2 to a new scheme when as soon as
matching mbcache entry is found, we wait with dropping the last xattr
block reference until mbcache entry reference is dropped (meaning either
the xattr block reference is increased or we decided not to reuse the
block).
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220712105436.32204-8-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Replace one else in ext2_xattr_set() with a goto. This makes following
code changes simpler to follow. No functional changes.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220712105436.32204-7-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Free of xattr block reference is opencode in two places. Factor it out
into a separate function and use it.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220712105436.32204-6-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When ext4_xattr_block_set() decides to remove xattr block the following
race can happen:
CPU1 CPU2
ext4_xattr_block_set() ext4_xattr_release_block()
new_bh = ext4_xattr_block_cache_find()
lock_buffer(bh);
ref = le32_to_cpu(BHDR(bh)->h_refcount);
if (ref == 1) {
...
mb_cache_entry_delete();
unlock_buffer(bh);
ext4_free_blocks();
...
ext4_forget(..., bh, ...);
jbd2_journal_revoke(..., bh);
ext4_journal_get_write_access(..., new_bh, ...)
do_get_write_access()
jbd2_journal_cancel_revoke(..., new_bh);
Later the code in ext4_xattr_block_set() finds out the block got freed
and cancels reusal of the block but the revoke stays canceled and so in
case of block reuse and journal replay the filesystem can get corrupted.
If the race works out slightly differently, we can also hit assertions
in the jbd2 code.
Fix the problem by making sure that once matching mbcache entry is
found, code dropping the last xattr block reference (or trying to modify
xattr block in place) waits until the mbcache entry reference is
dropped. This way code trying to reuse xattr block is protected from
someone trying to drop the last reference to xattr block.
Reported-and-tested-by: Ritesh Harjani <ritesh.list@gmail.com>
CC: stable@vger.kernel.org
Fixes: 82939d7999 ("ext4: convert to mbcache2")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220712105436.32204-5-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Remove unnecessary else (and thus indentation level) from a code block
in ext4_xattr_block_set(). It will also make following code changes
easier. No functional changes.
CC: stable@vger.kernel.org
Fixes: 82939d7999 ("ext4: convert to mbcache2")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220712105436.32204-4-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently we remove EA inode from mbcache as soon as its xattr refcount
drops to zero. However there can be pending attempts to reuse the inode
and thus refcount handling code has to handle the situation when
refcount increases from zero anyway. So save some work and just keep EA
inode in mbcache until it is getting evicted. At that moment we are sure
following iget() of EA inode will fail anyway (or wait for eviction to
finish and load things from the disk again) and so removing mbcache
entry at that moment is fine and simplifies the code a bit.
CC: stable@vger.kernel.org
Fixes: 82939d7999 ("ext4: convert to mbcache2")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220712105436.32204-3-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add function mb_cache_entry_delete_or_get() to delete mbcache entry if
it is unused and also add a function to wait for entry to become unused
- mb_cache_entry_wait_unused(). We do not share code between the two
deleting function as one of them will go away soon.
CC: stable@vger.kernel.org
Fixes: 82939d7999 ("ext4: convert to mbcache2")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220712105436.32204-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Do not reclaim entries that are currently used by somebody from a
shrinker. Firstly, these entries are likely useful. Secondly, we will
need to keep such entries to protect pending increment of xattr block
refcount.
CC: stable@vger.kernel.org
Fixes: 82939d7999 ("ext4: convert to mbcache2")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220712105436.32204-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_append() must always allocate a new block, otherwise we run the
risk of overwriting existing directory block corrupting the directory
tree in the process resulting in all manner of problems later on.
Add a sanity check to see if the logical block is already allocated and
error out if it is.
Cc: stable@kernel.org
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20220704142721.157985-2-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently ext4 directory handling code implicitly assumes that the
directory blocks are always within the i_size. In fact ext4_append()
will attempt to allocate next directory block based solely on i_size and
the i_size is then appropriately increased after a successful
allocation.
However, for this to work it requires i_size to be correct. If, for any
reason, the directory inode i_size is corrupted in a way that the
directory tree refers to a valid directory block past i_size, we could
end up corrupting parts of the directory tree structure by overwriting
already used directory blocks when modifying the directory.
Fix it by catching the corruption early in __ext4_read_dirblock().
Addresses Red-Hat-Bugzilla: #2070205
CVE: CVE-2022-1184
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20220704142721.157985-1-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add support to display the mb_optimize_scan value in
/proc/fs/ext4/<dev>/options file. The option is only
displayed when the value is non default.
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20220704054603.21462-1-ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Now if check directoy entry is corrupted, ext4_empty_dir may return true
then directory will be removed when file system mounted with "errors=continue".
In order not to make things worse just return false when directory is corrupted.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220622090223.682234-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When migrating to extents, the checksum seed of temporary inode
need to be replaced by inode's, otherwise the inode checksums
will be incorrect when swapping the inodes data.
However, the temporary inode can not match it's checksum to
itself since it has lost it's own checksum seed.
mkfs.ext4 -F /dev/sdc
mount /dev/sdc /mnt/sdc
xfs_io -fc "pwrite 4k 4k" -c "fsync" /mnt/sdc/testfile
chattr -e /mnt/sdc/testfile
chattr +e /mnt/sdc/testfile
umount /dev/sdc
fsck -fn /dev/sdc
========
...
Pass 1: Checking inodes, blocks, and sizes
Inode 13 passes checks, but checksum does not match inode. Fix? no
...
========
The fix is simple, save the checksum seed of temporary inode, and
recover it after migrating to extents.
Fixes: e81c9302a6 ("ext4: set csum seed in tmp inode while migrating to extents")
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220617062515.2113438-1-lilingfeng3@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Use the EXT4_INODE_HAS_XATTR_SPACE macro to more accurately
determine whether the inode have xattr space.
Cc: stable@kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220616021358.2504451-5-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If the ext4 inode does not have xattr space, 0 is returned in the
get_max_inline_xattr_value_size function. Otherwise, the function returns
a negative value when the inode does not contain EXT4_STATE_XATTR.
Cc: stable@kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220616021358.2504451-4-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When adding an xattr to an inode, we must ensure that the inode_size is
not less than EXT4_GOOD_OLD_INODE_SIZE + extra_isize + pad. Otherwise,
the end position may be greater than the start position, resulting in UAF.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220616021358.2504451-2-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
A race can occur in the unlikely event ext4 is unable to allocate a
physical cluster for a delayed allocation in a bigalloc file system
during writeback. Failure to allocate a cluster forces error recovery
that includes a call to mpage_release_unused_pages(). That function
removes any corresponding delayed allocated blocks from the extent
status tree. If a new delayed write is in progress on the same cluster
simultaneously, resulting in the addition of an new extent containing
one or more blocks in that cluster to the extent status tree, delayed
block accounting can be thrown off if that delayed write then encounters
a similar cluster allocation failure during future writeback.
Write lock the i_data_sem in mpage_release_unused_pages() to fix this
problem. Ext4's block/cluster accounting code for bigalloc relies on
i_data_sem for mutual exclusion, as is found in the delayed write path,
and the locking in mpage_release_unused_pages() is missing.
Cc: stable@kernel.org
Reported-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/r/20220615160530.1928801-1-enwlinux@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We catch an assert problem in jbd2_journal_commit_transaction() when
doing fsstress and request falut injection tests. The problem is
happened in a race condition between jbd2_journal_commit_transaction()
and ext4_end_io_end(). Firstly, ext4_writepages() writeback dirty pages
and start reserved handle, and then the journal was aborted due to some
previous metadata IO error, jbd2_journal_abort() start to commit current
running transaction, the committing procedure could be raced by
ext4_end_io_end() and lead to subtract j_reserved_credits twice from
commit_transaction->t_outstanding_credits, finally the
t_outstanding_credits is mistakenly smaller than t_nr_buffers and
trigger assert.
kjournald2 kworker
jbd2_journal_commit_transaction()
write_unlock(&journal->j_state_lock);
atomic_sub(j_reserved_credits, t_outstanding_credits); //sub once
jbd2_journal_start_reserved()
start_this_handle() //detect aborted journal
jbd2_journal_free_reserved() //get running transaction
read_lock(&journal->j_state_lock)
__jbd2_journal_unreserve_handle()
atomic_sub(j_reserved_credits, t_outstanding_credits);
//sub again
read_unlock(&journal->j_state_lock);
journal->j_running_transaction = NULL;
J_ASSERT(t_nr_buffers <= t_outstanding_credits) //bomb!!!
Fix this issue by using journal->j_state_lock to protect the subtraction
in jbd2_journal_commit_transaction().
Fixes: 96f1e09745 ("jbd2: avoid long hold times of j_state_lock while committing a transaction")
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220611130426.2013258-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
jbd2_log_start_commit() is not used outside of jbd2 so unexport it. Also
make __jbd2_log_start_commit() static when we are at it.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Link: https://lore.kernel.org/r/20220608112355.4397-4-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Jbd2 exports jbd2_journal_enable_debug and __jbd2_debug() depite the
first is used only in fs/jbd2/journal.c and the second only within jbd2
code. Remove the pointless exports make jbd2_journal_enable_debug
static.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Link: https://lore.kernel.org/r/20220608112355.4397-3-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The name of jbd_debug() is confusing as all functions inside jbd2 have
jbd2_ prefix. Rename jbd_debug() to jbd2_debug(). No functional changes.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Link: https://lore.kernel.org/r/20220608112355.4397-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We use jbd_debug() in some places in ext4. It seems a bit strange to use
jbd2 debugging output function for ext4 code. Also these days
ext4_debug() uses dynamic printk so each debug message can be enabled /
disabled on its own so the time when it made some sense to have these
combined (to allow easier common selecting of messages to report) has
passed. Just convert all jbd_debug() uses in ext4 to ext4_debug().
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Link: https://lore.kernel.org/r/20220608112355.4397-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
After each buddy split, mb_mark_used will search the proper order
for the block which may consume some loop in mb_find_order_for_block.
In fact, we can reuse the order and buddy generated by the buddy split.
Reviewed by: lei.rao@intel.com
Signed-off-by: hanjinke <hanjinke.666@bytedance.com>
Link: https://lore.kernel.org/r/20220606155305.74146-1-hanjinke.666@bytedance.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When the EXT4_IOC_RESIZE_FS ioctl is complete, update the backup
superblocks. We don't do this for the old-style resize ioctls since
they are quite ancient, and only used by very old versions of
resize2fs --- and we don't want to update the backup superblocks every
time EXT4_IOC_GROUP_ADD is called, since it might get called a lot.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20220629040026.112371-2-tytso@mit.edu
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When doing an online resize, the on-disk superblock on-disk wasn't
updated. This means that when the file system is unmounted and
remounted, and the on-disk overhead value is non-zero, this would
result in the results of statfs(2) to be incorrect.
This was partially fixed by Commits 10b01ee92d ("ext4: fix overhead
calculation to account for the reserved gdt blocks"), 85d825dbf4
("ext4: force overhead calculation if the s_overhead_cluster makes no
sense"), and eb7054212e ("ext4: update the cached overhead value in
the superblock").
However, since it was too expensive to forcibly recalculate the
overhead for bigalloc file systems at every mount, this didn't fix the
problem for bigalloc file systems. This commit should address the
problem when resizing file systems with the bigalloc feature enabled.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20220629040026.112371-1-tytso@mit.edu
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Since commit 6493792d32 ("ext4: convert symlink external data block
mapping to bdev"), create new symlink with inline_data is not supported,
but it missing to handle the leftover inlined symlinks, which could
cause below error message and fail to read symlink.
ls: cannot read symbolic link 'foo': Structure needs cleaning
EXT4-fs error (device sda): ext4_map_blocks:605: inode #12: block
2021161080: comm ls: lblock 0 mapped to illegal pblock 2021161080
(length 1)
Fix this regression by adding ext4_read_inline_link(), which read the
inline data directly and convert it through a kmalloced buffer.
Fixes: 6493792d32 ("ext4: convert symlink external data block mapping to bdev")
Cc: stable@kernel.org
Reported-by: Torge Matthies <openglfreak@googlemail.com>
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Tested-by: Torge Matthies <openglfreak@googlemail.com>
Link: https://lore.kernel.org/r/20220630090100.2769490-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
API:
- Make proc files report fips module name and version.
Algorithms:
- Move generic SHA1 code into lib/crypto.
- Implement Chinese Remainder Theorem for RSA.
- Remove blake2s.
- Add XCTR with x86/arm64 acceleration.
- Add POLYVAL with x86/arm64 acceleration.
- Add HCTR2.
- Add ARIA.
Drivers:
- Add support for new CCP/PSP device ID in ccp.
-----BEGIN PGP SIGNATURE-----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=rfWK
-----END PGP SIGNATURE-----
Merge tag 'v5.20-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Make proc files report fips module name and version
Algorithms:
- Move generic SHA1 code into lib/crypto
- Implement Chinese Remainder Theorem for RSA
- Remove blake2s
- Add XCTR with x86/arm64 acceleration
- Add POLYVAL with x86/arm64 acceleration
- Add HCTR2
- Add ARIA
Drivers:
- Add support for new CCP/PSP device ID in ccp"
* tag 'v5.20-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (89 commits)
crypto: tcrypt - Remove the static variable initialisations to NULL
crypto: arm64/poly1305 - fix a read out-of-bound
crypto: hisilicon/zip - Use the bitmap API to allocate bitmaps
crypto: hisilicon/sec - fix auth key size error
crypto: ccree - Remove a useless dma_supported() call
crypto: ccp - Add support for new CCP/PSP device ID
crypto: inside-secure - Add missing MODULE_DEVICE_TABLE for of
crypto: hisilicon/hpre - don't use GFP_KERNEL to alloc mem during softirq
crypto: testmgr - some more fixes to RSA test vectors
cyrpto: powerpc/aes - delete the rebundant word "block" in comments
hwrng: via - Fix comment typo
crypto: twofish - Fix comment typo
crypto: rmd160 - fix Kconfig "its" grammar
crypto: keembay-ocs-ecc - Drop if with an always false condition
Documentation: qat: rewrite description
Documentation: qat: Use code block for qat sysfs example
crypto: lib - add module license to libsha1
crypto: lib - make the sha1 library optional
crypto: lib - move lib/sha1.c into lib/crypto/
crypto: fips - make proc files report fips module name and version
...
The netfs_write_begin() won't set the folio if the return value
is non-zero.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Clear O_TRUNC from the flags sent in the MDS create request.
`atomic_open' is called before permission check. We should not do any
modification to the file here. The caller will do the truncation
afterward.
Fixes: 124e68e740 ("ceph: file operations")
Signed-off-by: Hu Weiwen <sehuww@mail.scut.edu.cn>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The f_frsize maybe changed in the quota size is less than the defualt
4MB.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When the quota is approaching we need to notify it to the MDS as
soon as possible, or the client could write to the directory more
than expected.
This will flush the dirty caps without delaying after each write,
though this couldn't prevent the real size of a directory exceed
the quota but could prevent it as soon as possible.
Link: https://tracker.ceph.com/issues/56180
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Luís Henriques <lhenriques@suse.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
If the 'i_inline_version' is 1, that means the file is just new
created and there shouldn't have any inline data in it, we should
skip retrieving the inline data from MDS.
This also could help reduce possiblity of dead lock issue introduce
by the inline data and Fcr caps.
Gradually we will remove the inline feature from kclient after ceph's
scrub too have support to unline the inline data, currently this
could help reduce the teuthology test failures.
This is possiblly could also fix a bug that for some old clients if
they couldn't explictly uninline the inline data when writing, the
inline version will keep as 1 always. We may always reading non-exist
data from inline data.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
For async create we will always try to choose the auth MDS of frag
the dentry belonged to of the parent directory to send the request
and ususally this works fine, but if the MDS migrated the directory
to another MDS before it could be handled the request will be
forwarded. And then the auth cap will be changed.
We need to update the auth cap in this case before the request is
forwarded.
Link: https://tracker.ceph.com/issues/55857
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Willy requested that we change this back to warning on folio->private
being non-NULl. He's trying to kill off the PG_private flag, and so we'd
like to catch where it's non-NULL.
Add a VM_WARN_ON_FOLIO (since it doesn't exist yet) and change over to
using that instead of VM_BUG_ON_FOLIO along with testing the ->private
pointer.
[ xiubli: define VM_WARN_ON_FOLIO macro in case DEBUG_VM is disabled
reported by kernel test robot <lkp@intel.com> ]
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
"was_async" is a bit misleadingly named. It's supposed to indicate
whether it's safe to call blocking operations from the context you're
calling it from, but it sounds like it's asking whether this was done
via async operation. For ceph, this it's always called from kernel
thread context so it should be safe to set this to false.
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
There's no reason we need to lock the inode for write in order to handle
an llseek. I suspect this should have been dropped in 2013 when we
stopped doing vmtruncate in llseek.
With that gone, ceph_llseek is functionally equivalent to
generic_file_llseek, so just call that after getting the size.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Luís Henriques <lhenriques@suse.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When handle_cap_grant is called on an IMPORT op, then the snap_rwsem is
held and the function is expected to release it before returning. It
currently fails to do that in all cases which could lead to a deadlock.
Fixes: 6f05b30ea0 ("ceph: reset i_requested_max_size if file write is not wanted")
Link: https://tracker.ceph.com/issues/55857
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Luís Henriques <lhenriques@suse.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The MDS tries to enforce a limit on the total key/values in extended
attributes. However, this limit is enforced only if doing a synchronous
operation (MDS_OP_SETXATTR) -- if we're buffering the xattrs, the MDS
doesn't have a chance to enforce these limits.
This patch adds support for decoding the xattrs maximum size setting that is
distributed in the mdsmap. Then, when setting an xattr, the kernel client
will revert to do a synchronous operation if that maximum size is exceeded.
While there, fix a dout() that would trigger a printk warning:
[ 98.718078] ------------[ cut here ]------------
[ 98.719012] precision 65536 too large
[ 98.719039] WARNING: CPU: 1 PID: 3755 at lib/vsprintf.c:2703 vsnprintf+0x5e3/0x600
...
Link: https://tracker.ceph.com/issues/55725
Signed-off-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
And for the 'Xs' caps for getxattr we will also choose the auth MDS,
because the MDS side code is buggy due to setxattr won't notify the
replica MDSes when the values changed and the replica MDS will return
the old values. Though we will fix it in MDS code, but this still
makes sense for old ceph.
Link: https://tracker.ceph.com/issues/55331
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
If the connection was accidently closed due to the socket issue or
something else the clients will try to open the opened sessions, the
MDSes will send the session open reply one more time if the clients
support the notify feature.
When the clients retry to open the sessions the s_seq will be 0 as
default, we need to update it anyway.
Link: https://tracker.ceph.com/issues/53911
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
In async unlink case the kclient won't wait for the first reply
from MDS and just drop all the links and unhash the dentry and then
succeeds immediately.
For any new create/link/rename,etc requests followed by using the
same file names we must wait for the first reply of the inflight
unlink request, or the MDS possibly will fail these following
requests with -EEXIST if the inflight async unlink request was
delayed for some reasons.
And the worst case is that for the none async openc request it will
successfully open the file if the CDentry hasn't been unlinked yet,
but later the previous delayed async unlink request will remove the
CDenty. That means the just created file is possiblly deleted later
by accident.
We need to wait for the inflight async unlink requests to finish
when creating new files/directories by using the same file names.
Link: https://tracker.ceph.com/issues/55332
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Compare dentry name with case-exact name, return true if names
are same, or false.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
This macro was added but never be used. And check the ceph code
there has another CEPHFS_FEATURES_MDS_REQUIRED but always be empty.
We should clean up all this related code, which make no sense but
introducing confusion.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Luís Henriques <lhenriques@suse.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Feature bits have to be encoded into the correct locations. This hasn't
been an issue so far because the only hole in the feature bits was in bit
10 (CEPHFS_FEATURE_RECLAIM_CLIENT), which is located in the 2nd byte. When
adding more bits that go beyond the this 2nd byte, the bug will show up.
[xiubli: remove incorrect comment for CEPHFS_FEATURES_CLIENT_SUPPORTED]
Fixes: 9ba1e22453 ("ceph: allocate the correct amount of extra bytes for the session features")
Signed-off-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Most filesystems just call fscrypt_set_context on new inodes, which
usually causes a setxattr. That's a bit late for ceph, which can send
along a full set of attributes with the create request.
Doing so allows it to avoid race windows that where the new inode could
be seen by other clients without the crypto context attached. It also
avoids the separate round trip to the server.
Refactor the fscrypt code a bit to allow us to create a new crypto
context, attach it to the inode, and write it to the buffer, but without
calling set_context on it. ceph can later use this to marshal the
context into the attributes we send along with the create request.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
For ceph, we want to use our own scheme for handling filenames that are
are longer than NAME_MAX after encryption and Base64 encoding. This
allows us to have a consistent view of the encrypted filenames for
clients that don't support fscrypt and clients that do but that don't
have the key.
Currently, fs/crypto only supports encrypting filenames using
fscrypt_setup_filename, but that also handles encoding nokey names. Ceph
can't use that because it handles nokey names in a different way.
Export fscrypt_fname_encrypt. Rename fscrypt_fname_encrypted_size to
__fscrypt_fname_encrypted_size and add a new wrapper called
fscrypt_fname_encrypted_size that takes an inode argument rather than a
pointer to a fscrypt_policy union.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
inode_insert5 currently looks at I_CREATING to decide whether to insert
the inode into the sb list. This test is a bit ambiguous, as I_CREATING
state is not directly related to that list.
This test is also problematic for some upcoming ceph changes to add
fscrypt support. We need to be able to allocate an inode using new_inode
and insert it into the hash later iff we end up using it, and doing that
now means that we double add it and corrupt the list.
What we really want to know in this test is whether the inode is already
in its superblock list, and then add it if it isn't. Have it test for
list_empty instead and ensure that we always initialize the list by
doing it in inode_init_once. It's only ever removed from the list with
list_del_init, so that should be sufficient.
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Just a small documentation update to mention the btrfs support.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCYumAiBQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK/pjAQDJbkG6S1eEdhC3m6oHlSToiy2p0FDH
+qr4fQndCO0l+QEAgo3ULXvbCKlLPOQHM2gVjnUR+UUHnjJ3p2F5aODsfQ4=
=UMFK
-----END PGP SIGNATURE-----
Merge tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt
Pull fsverity update from Eric Biggers:
"Just a small documentation update to mention the btrfs support"
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
fs-verity: mention btrfs support
- Allow unsharing time namespace on vfork+exec (Andrei Vagin)
- Replace usage of deprecated kmap APIs (Fabio M. De Francesco)
- Fix spelling mistake (Zhang Jiaming)
-----BEGIN PGP SIGNATURE-----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=82SS
-----END PGP SIGNATURE-----
Merge tag 'execve-v5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull execve updates from Kees Cook:
- Allow unsharing time namespace on vfork+exec (Andrei Vagin)
- Replace usage of deprecated kmap APIs (Fabio M. De Francesco)
- Fix spelling mistake (Zhang Jiaming)
* tag 'execve-v5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
exec: Call kmap_local_page() in copy_string_kernel()
exec: Fix a spelling mistake
selftests/timens: add a test for vfork+exit
fs/exec: allow to unshare a time namespace on vfork+exec
- Migrate to modern acomp crypto interface (Ard Biesheuvel)
- Use better return type for "rcnt" (Dan Carpenter)
-----BEGIN PGP SIGNATURE-----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=jJ4i
-----END PGP SIGNATURE-----
Merge tag 'pstore-v5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull pstore updates from Kees Cook:
- Migrate to modern acomp crypto interface (Ard Biesheuvel)
- Use better return type for "rcnt" (Dan Carpenter)
* tag 'pstore-v5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
pstore/zone: cleanup "rcnt" type
pstore: migrate to crypto acomp interface
-----BEGIN PGP SIGNATURE-----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=celk
-----END PGP SIGNATURE-----
Merge tag 'for-5.20/block-2022-07-29' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
- Improve the type checking of request flags (Bart)
- Ensure queue mapping for a single queues always picks the right queue
(Bart)
- Sanitize the io priority handling (Jan)
- rq-qos race fix (Jinke)
- Reserved tags handling improvements (John)
- Separate memory alignment from file/disk offset aligment for O_DIRECT
(Keith)
- Add new ublk driver, userspace block driver using io_uring for
communication with the userspace backend (Ming)
- Use try_cmpxchg() to cleanup the code in various spots (Uros)
- Finally remove bdevname() (Christoph)
- Clean up the zoned device handling (Christoph)
- Clean up independent access range support (Christoph)
- Clean up and improve block sysfs handling (Christoph)
- Clean up and improve teardown of block devices.
This turns the usual two step process into something that is simpler
to implement and handle in block drivers (Christoph)
- Clean up chunk size handling (Christoph)
- Misc cleanups and fixes (Bart, Bo, Dan, GuoYong, Jason, Keith, Liu,
Ming, Sebastian, Yang, Ying)
* tag 'for-5.20/block-2022-07-29' of git://git.kernel.dk/linux-block: (178 commits)
ublk_drv: fix double shift bug
ublk_drv: make sure that correct flags(features) returned to userspace
ublk_drv: fix error handling of ublk_add_dev
ublk_drv: fix lockdep warning
block: remove __blk_get_queue
block: call blk_mq_exit_queue from disk_release for never added disks
blk-mq: fix error handling in __blk_mq_alloc_disk
ublk: defer disk allocation
ublk: rewrite ublk_ctrl_get_queue_affinity to not rely on hctx->cpumask
ublk: fold __ublk_create_dev into ublk_ctrl_add_dev
ublk: cleanup ublk_ctrl_uring_cmd
ublk: simplify ublk_ch_open and ublk_ch_release
ublk: remove the empty open and release block device operations
ublk: remove UBLK_IO_F_PREFLUSH
ublk: add a MAINTAINERS entry
block: don't allow the same type rq_qos add more than once
mmc: fix disk/queue leak in case of adding disk failure
ublk_drv: fix an IS_ERR() vs NULL check
ublk: remove UBLK_IO_F_INTEGRITY
ublk_drv: remove unneeded semicolon
...
-----BEGIN PGP SIGNATURE-----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=hV7G
-----END PGP SIGNATURE-----
Merge tag 'for-5.20/io_uring-buffered-writes-2022-07-29' of git://git.kernel.dk/linux-block
Pull io_uring buffered writes support from Jens Axboe:
"This contains support for buffered writes, specifically for XFS. btrfs
is in progress, will be coming in the next release.
io_uring does support buffered writes on any file type, but since the
buffered write path just always -EAGAIN (or -EOPNOTSUPP) any attempt
to do so if IOCB_NOWAIT is set, any buffered write will effectively be
handled by io-wq offload. This isn't very efficient, and we even have
specific code in io-wq to serialize buffered writes to the same inode
to avoid further inefficiencies with thread offload.
This is particularly sad since most buffered writes don't block, they
simply copy data to a page and dirty it. With this pull request, we
can handle buffered writes a lot more effiently.
If balance_dirty_pages() needs to block, we back off on writes as
indicated.
This improves buffered write support by 2-3x.
Jan Kara helped with the mm bits for this, and Stefan handled the
fs/iomap/xfs/io_uring parts of it"
* tag 'for-5.20/io_uring-buffered-writes-2022-07-29' of git://git.kernel.dk/linux-block:
mm: honor FGP_NOWAIT for page cache page allocation
xfs: Add async buffered write support
xfs: Specify lockmode when calling xfs_ilock_for_iomap()
io_uring: Add tracepoint for short writes
io_uring: fix issue with io_write() not always undoing sb_start_write()
io_uring: Add support for async buffered writes
fs: Add async write file modification handling.
fs: Split off inode_needs_update_time and __file_update_time
fs: add __remove_file_privs() with flags parameter
fs: add a FMODE_BUF_WASYNC flags for f_mode
iomap: Return -EAGAIN from iomap_write_iter()
iomap: Add async buffered write support
iomap: Add flags parameter to iomap_page_create()
mm: Add balance_dirty_pages_ratelimited_flags() function
mm: Move updates of dirty_exceeded into one place
mm: Move starting of background writeback into the main balancing loop
-----BEGIN PGP SIGNATURE-----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=gxeV
-----END PGP SIGNATURE-----
Merge tag 'for-5.20/io_uring-2022-07-29' of git://git.kernel.dk/linux-block
Pull io_uring updates from Jens Axboe:
- As per (valid) complaint in the last merge window, fs/io_uring.c has
grown quite large these days. io_uring isn't really tied to fs
either, as it supports a wide variety of functionality outside of
that.
Move the code to io_uring/ and split it into files that either
implement a specific request type, and split some code into helpers
as well. The code is organized a lot better like this, and io_uring.c
is now < 4K LOC (me).
- Deprecate the epoll_ctl opcode. It'll still work, just trigger a
warning once if used. If we don't get any complaints on this, and I
don't expect any, then we can fully remove it in a future release
(me).
- Improve the cancel hash locking (Hao)
- kbuf cleanups (Hao)
- Efficiency improvements to the task_work handling (Dylan, Pavel)
- Provided buffer improvements (Dylan)
- Add support for recv/recvmsg multishot support. This is similar to
the accept (or poll) support for have for multishot, where a single
SQE can trigger everytime data is received. For applications that
expect to do more than a few receives on an instantiated socket, this
greatly improves efficiency (Dylan).
- Efficiency improvements for poll handling (Pavel)
- Poll cancelation improvements (Pavel)
- Allow specifiying a range for direct descriptor allocations (Pavel)
- Cleanup the cqe32 handling (Pavel)
- Move io_uring types to greatly cleanup the tracing (Pavel)
- Tons of great code cleanups and improvements (Pavel)
- Add a way to do sync cancelations rather than through the sqe -> cqe
interface, as that's a lot easier to use for some use cases (me).
- Add support to IORING_OP_MSG_RING for sending direct descriptors to a
different ring. This avoids the usually problematic SCM case, as we
disallow those. (me)
- Make the per-command alloc cache we use for apoll generic, place
limits on it, and use it for netmsg as well (me).
- Various cleanups (me, Michal, Gustavo, Uros)
* tag 'for-5.20/io_uring-2022-07-29' of git://git.kernel.dk/linux-block: (172 commits)
io_uring: ensure REQ_F_ISREG is set async offload
net: fix compat pointer in get_compat_msghdr()
io_uring: Don't require reinitable percpu_ref
io_uring: fix types in io_recvmsg_multishot_overflow
io_uring: Use atomic_long_try_cmpxchg in __io_account_mem
io_uring: support multishot in recvmsg
net: copy from user before calling __get_compat_msghdr
net: copy from user before calling __copy_msghdr
io_uring: support 0 length iov in buffer select in compat
io_uring: fix multishot ending when not polled
io_uring: add netmsg cache
io_uring: impose max limit on apoll cache
io_uring: add abstraction around apoll cache
io_uring: move apoll cache to poll.c
io_uring: consolidate hash_locked io-wq handling
io_uring: clear REQ_F_HASH_LOCKED on hash removal
io_uring: don't race double poll setting REQ_F_ASYNC_DATA
io_uring: don't miss setting REQ_F_DOUBLE_POLL
io_uring: disable multishot recvmsg
io_uring: only trace one of complete or overflow
...
If someone cancels the open RPC call, then we must not try to free
either the open slot or the layoutget operation arguments, since they
are likely still in use by the hung RPC call.
Fixes: 6949493884 ("NFSv4: Don't hold the layoutget locks across multiple RPC calls")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
It is not safe to call filemap_fdatawrite_range() from
nfs_async_write_reschedule_io(), since we're often calling from a page
reclaim context. Just let fsync() redrive the writeback for us.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Reference-putting functions should not access the object being put after
decrementing the refcount unless they reduce the refcount to zero.
Fix a couple of instances of this in afs by copying the information to be
logged by tracepoint to local variables before doing the decrement.
[Fixed a bit in afs_put_server() that I'd missed but Marc caught]
Fixes: 341f741f04 ("afs: Refcount the afs_call struct")
Fixes: 4521819369 ("afs: Trace afs_server usage")
Fixes: 977e5f8ed0 ("afs: Split the usage count on struct afs_server")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/165911278430.3745403.16526310736054780645.stgit@warthog.procyon.org.uk/ # v1
No one calls mpage_writepages with a NULL get_block paramter, so remove
support for that case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
All callers of mpage_writepage use block_write_full_page as their
->writepage implementation when called from mpage_writepages
(although for ntfs3 this is obsfucated a bit).
Just call block_write_full_page directly instead of going through
the ->writepage indirection.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
All callers are gone, so remove the now dead code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
The nobh mode is an obscure feature to save lowlevel for large memory
32-bit configurations while trading for much slower performance and
has been long obsolete. Switch to the regular buffer head based helpers
instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
The nobh mode is an obscure feature to save lowlevel for large memory
32-bit configurations while trading for much slower performance and
has been long obsolete. Remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Handle the resident case with an explicit generic_writepages call instead
of using the obscure overload that makes mpage_writepages with a NULL
get_block do the same thing.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
This involves converting migrate_huge_page_move_mapping(). We also need a
folio variant of hugetlb_set_page_subpool(), but that's for a later patch.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
filemap_migrate_folio() is a little more general than ubifs really needs,
but it's better to share the code.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Use filemap_migrate_folio() to do the bulk of the work, and then copy
the ordered flag across if needed.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: David Sterba <dsterba@suse.com>
There is nothing iomap-specific about iomap_migratepage(), and it fits
a pattern used by several other filesystems, so move it to mm/migrate.c,
convert it to be filemap_migrate_folio() and convert the iomap filesystems
to use it.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Convert all callers to pass a folio. Most have the folio
already available. Switch all users from aops->migratepage to
aops->migrate_folio. Also turn the documentation into kerneldoc.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: David Sterba <dsterba@suse.com>
Use a folio throughout this function. migrate_page() will be converted
later.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Use a folio throughout this function. migrate_page() will be converted
later.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: David Sterba <dsterba@suse.com>
Use a folio throughout __buffer_migrate_folio(), add kernel-doc for
buffer_migrate_folio() and buffer_migrate_folio_norefs(), move their
declarations to buffer.h and switch all filesystems that have wired
them up.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Use folio_put_refs() to perform only one atomic operation instead of two.
The other changes are straightforward conversions from page APIs to
their folio equivalents.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Use the folio API throughout. There are a few places where we convert
back to a page to call into the rest of the filesystem, so folio usage
needs to be pushed down to those functions later.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reorganise the file to remove the forward declaration.
Use folios throughout vxfs_immed_read_folio().
Use memcpy_to_page() instead of an open-coded kmap()/kunmap().
Remove flush_dcache_page() as this is embedded in memcpy_to_page().
Use folio_pos() instead of opencoding it.
Handle multi-page folios.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
This is a straightforward conversion from the page APIs to the folio
APIs. Symlinks are not allowed to be larger than PAGE_SIZE, so there
is little work to do here.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
This is a straightforward conversion from the page APIs to the folio
APIs. Symlinks are not allowed to be larger than PAGE_SIZE, so there
is little work to do here.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Since commit 67f9fd91f9, the code to wait for the read to complete has
been dead. That commit wrongly stated that the read was synchronous
already; this seems to have been a confusion about which ->readpage
operation was being called. Instead of reintroducing an asynchronous
version of read_mapping_page(), call the readahead code directly to
submit all reads first before waiting for them in read_mapping_page().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
If a page can't be written back, we need to call mapping_set_error(),
not clear the page's Uptodate flag. Also remove the clearing of PageError
on success; that flag is used for read errors, not write errors.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Since we actually know what error happened, we can report it instead
of having the generic code return -EIO for pages that were unlocked
without being marked uptodate. Also remove a test of PageError since
we have the return value at this point.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
We can cache this information in a local variable instead of communicating
from one part of the function to another via folio flags.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
The use of kmap() is being deprecated in favor of kmap_local_page()
where it is feasible. For kmap around a memcpy there's a convenience
helper memcpy_to_page that also makes the flush_dcache_page() redundant.
CC: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCYufiMwAKCRCRxhvAZXjc
os2iAQDr3tK9e2EUZDZ3Vgu3tvmTLKiU7W7f4U/ZAjJE5snBOwD+OqK8r1RdvXf8
TatkVFFNZYlINDN6JrS5yGSKBm1+RwE=
=8eZE
-----END PGP SIGNATURE-----
Merge tag 'fs.idmapped.overlay.acl.v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull acl updates from Christian Brauner:
"Last cycle we introduced support for mounting overlayfs on top of
idmapped mounts. While looking into additional testing we realized
that posix acls don't really work correctly with stacking filesystems
on top of idmapped layers.
We already knew what the fix were but it would require work that is
more suitable for the merge window so we turned off posix acls for
v5.19 for overlayfs on top of idmapped layers with Miklos routing my
patch upstream in 72a8e05d4f ("Merge tag 'ovl-fixes-5.19-rc7' [..]").
This contains the work to support posix acls for overlayfs on top of
idmapped layers. Since the posix acl fixes should use the new
vfs{g,u}id_t work the associated branch has been merged in. (We sent a
pull request for this earlier.)
We've also pulled in Miklos pull request containing my patch to turn
of posix acls on top of idmapped layers. This allowed us to avoid
rebasing the branch which we didn't like because we were already at
rc7 by then. Merging it in allows this branch to first fix posix acls
and then to cleanly revert the temporary fix it brought in by commit
4a47c6385b ("ovl: turn of SB_POSIXACL with idmapped layers
temporarily").
The last patch in this series adds Seth Forshee as a co-maintainer for
idmapped mounts. Seth has been integral to all of this work and is
also the main architect behind the filesystem idmapping work which
ultimately made filesystems such as FUSE and overlayfs available in
containers. He continues to be active in both development and review.
I'm very happy he decided to help and he has my full trust. This
increases the bus factor which is always great for work like this. I'm
honestly very excited about this because I think in general we don't
do great in the bringing on new maintainers department"
For more explanations of the ACL issues, see
https://lore.kernel.org/all/20220801145520.1532837-1-brauner@kernel.org/
* tag 'fs.idmapped.overlay.acl.v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
Add Seth Forshee as co-maintainer for idmapped mounts
Revert "ovl: turn of SB_POSIXACL with idmapped layers temporarily"
ovl: handle idmappings in ovl_get_acl()
acl: make posix_acl_clone() available to overlayfs
acl: port to vfs{g,u}id_t
acl: move idmapped mount fixup into vfs_{g,s}etxattr()
mnt_idmapping: add vfs[g,u]id_into_k[g,u]id()
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCYufP6AAKCRCRxhvAZXjc
omzRAQCGJ11r7T0C7t1kTdQiFSs5XN9ksFa86Hfj3dHEBIj+LQEA+bZ2/LLpElDz
zPekgXkFQqdMr+FUL8sk94dzHT0GAgk=
=BcK/
-----END PGP SIGNATURE-----
Merge tag 'fs.idmapped.vfsuid.v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull fs idmapping updates from Christian Brauner:
"This introduces the new vfs{g,u}id_t types we agreed on. Similar to
k{g,u}id_t the new types are just simple wrapper structs around
regular {g,u}id_t types.
They allow to establish a type safety boundary in the VFS for idmapped
mounts preventing confusion betwen {g,u}ids mapped into an idmapped
mount and {g,u}ids mapped into the caller's or the filesystem's
idmapping.
An initial set of helpers is introduced that allows to operate on
vfs{g,u}id_t types. We will remove all references to non-type safe
idmapped mounts helpers in the very near future. The patches do
already exist.
This converts the core attribute changing codepaths which become
significantly easier to reason about because of this change.
Just a few highlights here as the patches give detailed overviews of
what is happening in the commit messages:
- The kernel internal struct iattr contains type safe vfs{g,u}id_t
values clearly communicating that these values have to take a given
mount's idmapping into account.
- The ownership values placed in struct iattr to change ownership are
identical for idmapped and non-idmapped mounts going forward. This
also allows to simplify stacking filesystems such as overlayfs that
change attributes In other words, they always represent the values.
- Instead of open coding checks for whether ownership changes have
been requested and an actual update of the inode is required we now
have small static inline wrappers that abstract this logic away
removing a lot of code duplication from individual filesystems that
all open-coded the same checks"
* tag 'fs.idmapped.vfsuid.v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
mnt_idmapping: align kernel doc and parameter order
mnt_idmapping: use new helpers in mapped_fs{g,u}id()
fs: port HAS_UNMAPPED_ID() to vfs{g,u}id_t
mnt_idmapping: return false when comparing two invalid ids
attr: fix kernel doc
attr: port attribute changes to new types
security: pass down mount idmapping to setattr hook
quota: port quota helpers mount ids
fs: port to iattr ownership update helpers
fs: introduce tiny iattr ownership update helpers
fs: use mount types in iattr
fs: add two type safe mapping helpers
mnt_idmapping: add vfs{g,u}id_t
-----BEGIN PGP SIGNATURE-----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=wDtt
-----END PGP SIGNATURE-----
Merge tag 'filelock-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux
Pull file locking updates from Jeff Layton:
"Just a couple of flock() patches from Kuniyuki Iwashima.
The main change is that this moves a file_lock allocation from the
slab to the stack"
* tag 'filelock-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
fs/lock: Rearrange ops in flock syscall.
fs/lock: Don't allocate file_lock in flock_make_lock().
- Add Yue Hu and Jeffle Xu as reviewers;
- Add the missing wake_up when updating lzma streams;
- Avoid consecutive detection for Highmem memory;
- Prepare for multi-reference pclusters and get rid of PG_error;
- Fix ctx->pos update for NFS export;
- minor cleanups.
-----BEGIN PGP SIGNATURE-----
iIcEABYIAC8WIQThPAmQN9sSA0DVxtI5NzHcH7XmBAUCYub3chEceGlhbmdAa2Vy
bmVsLm9yZwAKCRA5NzHcH7XmBMMSAP9P7kMPLuc0RP9AjoiQXKNAfWqIbGnbkI5C
ACUUu5tZEgD/T7HhkDYIs/wAZzYB7qTkpepkY/XzuwnlodhaSTwnPQ8=
=/vU1
-----END PGP SIGNATURE-----
Merge tag 'erofs-for-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs updates from Gao Xiang:
"First of all, we'd like to add Yue Hu and Jeffle Xu as two new
reviewers. Thank them for spending time working on EROFS!
There is no major feature outstanding in this cycle, mainly a patchset
I worked on to prepare for rolling hash deduplication and folios for
compressed data as the next big features. It kills the unneeded
PG_error flag dependency as well.
Apart from that, there are bugfixes and cleanups as always. Details
are listed below:
- Add Yue Hu and Jeffle Xu as reviewers
- Add the missing wake_up when updating lzma streams
- Avoid consecutive detection for Highmem memory
- Prepare for multi-reference pclusters and get rid of PG_error
- Fix ctx->pos update for NFS export
- minor cleanups"
* tag 'erofs-for-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs: (23 commits)
erofs: update ctx->pos for every emitted dirent
erofs: get rid of the leftover PAGE_SIZE in dir.c
erofs: get rid of erofs_prepare_dio() helper
erofs: introduce multi-reference pclusters (fully-referenced)
erofs: record the longest decompressed size in this round
erofs: introduce z_erofs_do_decompressed_bvec()
erofs: try to leave (de)compressed_pages on stack if possible
erofs: introduce struct z_erofs_decompress_backend
erofs: get rid of `z_pagemap_global'
erofs: clean up `enum z_erofs_collectmode'
erofs: get rid of `enum z_erofs_page_type'
erofs: rework online page handling
erofs: switch compressed_pages[] to bufvec
erofs: introduce `z_erofs_parse_in_bvecs'
erofs: drop the old pagevec approach
erofs: introduce bufvec to store decompressed buffers
erofs: introduce `z_erofs_parse_out_bvecs()'
erofs: clean up z_erofs_collector_begin()
erofs: get rid of unneeded `inode', `map' and `sb'
erofs: avoid consecutive detection for Highmem memory
...
Pull fsnotify updates from Jan Kara:
- support for FAN_MARK_IGNORE which untangles some of the not well
defined corner cases with fanotify ignore masks
- small cleanups
* tag 'fsnotify_for_v5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fsnotify: Fix comment typo
fanotify: introduce FAN_MARK_IGNORE
fanotify: cleanups for fanotify_mark() input validations
fanotify: prepare for setting event flags in ignore mask
fs: inotify: Fix typo in inotify comment
Pull ext2 and reiserfs updates from Jan Kara:
"A fix for ext2 handling of a corrupted fs image and cleanups in ext2
and reiserfs"
* tag 'fs_for_v5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
ext2: Add more validity checks for inode counts
fs/reiserfs/inode: remove dead code in _get_block_create_0()
fs/ext2: replace ternary operator with min_t()
Changes in this set of commits:
. Delay the cleanup of interrupted posix lock requests until the
user space result arrives. Previously, the immediate cleanup
would lead to extraneous warnings when the result arrived.
. Tracepoint improvements, e.g. adding the lock resource name.
. Delay the completion of lockspace creation until one full recovery
cycle has completed. This allows more error cases to be returned to
the caller.
. Remove warnings from the locking layer about delayed network replies.
The recently added midcomms warnings are much more useful.
. Begin the process of deprecating two unused lock-timeout-related
features. These features now require enabling via a Kconfig option,
and enabling them triggers deprecation warnings. We expect to
remove the code in v6.2.
-----BEGIN PGP SIGNATURE-----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=Dnn4
-----END PGP SIGNATURE-----
Merge tag 'dlm-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm
Pull dlm updates from David Teigland:
- Delay the cleanup of interrupted posix lock requests until the user
space result arrives. Previously, the immediate cleanup would lead to
extraneous warnings when the result arrived.
- Tracepoint improvements, e.g. adding the lock resource name.
- Delay the completion of lockspace creation until one full recovery
cycle has completed. This allows more error cases to be returned to
the caller.
- Remove warnings from the locking layer about delayed network replies.
The recently added midcomms warnings are much more useful.
- Begin the process of deprecating two unused lock-timeout-related
features. These features now require enabling via a Kconfig option,
and enabling them triggers deprecation warnings. We expect to remove
the code in v6.2.
* tag 'dlm-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
fs: dlm: move kref_put assert for lkb structs
fs: dlm: don't use deprecated timeout features by default
fs: dlm: add deprecation Kconfig and warnings for timeouts
fs: dlm: remove timeout from dlm_user_adopt_orphan
fs: dlm: remove waiter warnings
fs: dlm: fix grammar in lowcomms output
fs: dlm: add comment about lkb IFL flags
fs: dlm: handle recovery result outside of ls_recover
fs: dlm: make new_lockspace() wait until recovery completes
fs: dlm: call dlm_lsop_recover_prep once
fs: dlm: update comments about recovery and membership handling
fs: dlm: add resource name to tracepoints
fs: dlm: remove additional dereference of lksb
fs: dlm: change ast and bast trace order
fs: dlm: change posix lock sigint handling
fs: dlm: use dlm_plock_info for do_unlock_close
fs: dlm: change plock interrupted message to debug again
fs: dlm: add pid to debug log
fs: dlm: plock use list_first_entry
The unhold_lkb() function decrements the lock's kref, and
asserts that the ref count was not the final one. Use the
kref_put release function (which should not be called) to
call the assert, rather than doing the assert based on the
kref_put return value. Using kill_lkb() as the release
function doesn't make sense if we only want to assert.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch will disable use of deprecated timeout features if
CONFIG_DLM_DEPRECATED_API is not set. The deprecated features
will be removed in upcoming kernel release v6.2.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch adds a CONFIG_DLM_DEPRECATED_API Kconfig option
that must be enabled to use two timeout-related features
that we intend to remove in kernel v6.2. Warnings are
printed if either is enabled and used. Neither has ever
been used as far as we know.
. The DLM_LSFL_TIMEWARN lockspace creation flag will be
removed, along with the associated configfs entry for
setting the timeout. Setting the flag and configfs file
would cause dlm to track how long locks were waiting
for reply messages. After a timeout, a kernel message
would be logged, and a netlink message would be sent
to userspace. Recently, midcomms messages have been
added that produce much better logging about actual
problems with messages. No use has ever been found
for the netlink messages.
. The userspace libdlm API has allowed the DLM_LKF_TIMEOUT
flag with a timeout value to be set in lock requests.
The lock request would be cancelled after the timeout.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
It should unlock 'tcon->tc_lock' before return from cifs_tree_connect().
Fixes: fe67bd563ec2 ("cifs: avoid use of global locks for high contention data")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
During analysis of multichannel perf, it was seen that
the global locks cifs_tcp_ses_lock and GlobalMid_Lock, which
were shared between various data structures were causing a
lot of contention points.
With this change, we're breaking down the use of these locks
by introducing new locks at more granular levels. i.e.
server->srv_lock, ses->ses_lock and tcon->tc_lock to protect
the unprotected fields of server, session and tcon structs;
and server->mid_lock to protect mid related lists and entries
at server level.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Removed remaining warnings related to externs. These warnings
although harmless could be distracting e.g.
fs/cifs/cifsfs.c: note: in included file:
fs/cifs/cifsglob.h:1968:24: warning: symbol 'sesInfoAllocCount' was not declared. Should it be static?
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Replace list_for_each() by list_for_each_entr() where appropriate.
Remove no longer used list_head stack variables.
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
If the command is SMB2_IOCTL, OutputLength and OutputContext are
optional and can be zero, so return early and skip calculated length
check.
Move the mismatched length message to the end of the check, to avoid
unnecessary logs when the check was not a real miscalculation.
Also change the pr_warn_once() to a pr_warn() so we're sure to get a
log for the real mismatches.
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
If we hit the 'index == next_cached' case, we leak a refcount on the
struct page. Fix this by using readahead_folio() which takes care of
the refcount for you.
Fixes: 0174ee9947 ("cifs: Implement cache I/O by accessing the cache directly")
Cc: David Howells <dhowells@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The build warning:
warning: symbol 'cifs_tcp_ses_lock' was not declared. Should it be static?
can be distracting. Fix two of these.
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Remove warnings for five global variables. For example:
fs/cifs/cifsglob.h:1984:24: warning: symbol 'midCount' was not declared. Should it be static?
Also change them from camelCase (e.g. "midCount" to "mid_count")
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Variable mnt_sign_enabled is being initialized with a value that
is never read, it is being reassigned later on with a different
value. The initialization is redundant and can be removed.
Cleans up clang scan-build warning:
fs/cifs/cifssmb.c:465:7: warning: Value stored to 'mnt_sign_enabled
during its initialization is never read
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Coverity complains about assigning a pointer based on
value length before checking that value length goes
beyond the end of the SMB. Although this is even more
unlikely as value length is a single byte, and the
pointer is not dereferenced until laterm, it is clearer
to check the lengths first.
Addresses-Coverity: 1467704 ("Speculative execution data leak")
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The allocated memory didn't free under an error
path in smb2_handle_negotiate().
Fixes: e2f34481b2 ("cifsd: add server-side procedures for SMB3")
Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-17815
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
After multi-channel connection with windows, Several channels of
session are connected. Among them, if there is a problem in one channel,
Windows connects again after disconnecting the channel. In this process,
the session is released and a kernel oop can occurs while processing
requests to other channels. When the channel is disconnected, if other
channels still exist in the session after deleting the channel from
the channel list in the session, the session should not be released.
Finally, the session will be released after all channels are disconnected.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
ksmbd threads eating masses of cputime when connection is disconnected.
If connection is disconnected, ksmbd thread waits for pending requests
to be processed using schedule_timeout. schedule_timeout() incorrectly
is used, and it is more efficient to use wait_event/wake_up than to check
r_count every time with timeout.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
exfat_err() adds the new line at the end of the message by itself,
hence the passed string shouldn't contain a new line. Drop the
superfluous newline letters in the error messages in a few places that
have been put mistakenly.
Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
The ENAMETOOLONG error message is printed at each time when user tries
to operate with a too long name, and this can flood the kernel logs
easily, as every user can trigger this. Let's downgrade this error
message level to a debug message for suppressing the superfluous
logs.
BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1201725
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Currently the error and info messages handled by exfat_err() and co
are tossed to exfat_msg() function that does nothing but passes the
strings with printk() invocation. Not only that this is more overhead
by the indirect calls, but also this makes harder to extend for the
debug print usage; because of the direct printk() call, you cannot
make it for dynamic debug or without debug like the standard helpers
such as pr_debug() or dev_dbg().
For addressing the problem, this patch replaces exfat_*() macro to
expand to pr_*() directly. Along with it, add the new exfat_debug()
macro that is expanded to pr_debug() (which output can be gracefully
suppressed via dyndbg).
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
NLS_NAME_* are bit flags although they are currently defined as enum;
it's casually working so far (from 0 to 2), but it's error-prone and
may bring a problem when we want to add more flag.
This patch changes the definitions of NLS_NAME_* explicitly being bit
flags.
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
LTP has a test for oversized file path renames and it expects the
return value to be ENAMETOOLONG. However, exfat returns EINVAL
unexpectedly in some cases, hence LTP test fails. The further
investigation indicated that the problem happens only when iocharset
isn't set to utf8.
The difference comes from that, in the case of utf8,
exfat_utf8_to_utf16() returns the error -ENAMETOOLONG directly and
it's treated as the final error code. Meanwhile, on other iocharsets,
exfat_nls_to_ucs2() returns the max path size but it sets
NLS_NAME_OVERLEN to lossy flag instead; the caller side checks only
whether lossy flag is set or not, resulting in always -EINVAL
unconditionally.
This patch aligns the return code for both cases by checking the lossy
flag bit and returning ENAMETOOLONG when NLS_NAME_OVERLEN bit is set.
BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1201725
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Since the timestamps need to be updated, the directory entries
will be updated by mark_inode_dirty() whether or not a new
cluster is allocated for the file or directory, so there is no
need to use __exfat_write_inode() to update the directory entries
when allocating a new cluster for a file or directory.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Daniel Palmer <daniel.palmer@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
This commit moves updating file attributes and timestamps before
calling __exfat_write_inode(), so that all updates of the inode
had been written by __exfat_write_inode(), mark_inode_dirty() is
unneeded.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Daniel Palmer <daniel.palmer@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
__exfat_write_inode() is used to update file and stream directory
entries, except for file->start_clu and stream->flags.
This commit moves update file->start_clu and stream->flags to
__exfat_write_inode() and reuse __exfat_write_inode() to update
directory entries.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Daniel Palmer <daniel.palmer@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
delete extra space and tab in blank line, there is no functional change.
Reported-by: Hacash Robot <hacashRobot@santino.com>
Signed-off-by: Xie Shaowen <studentxswpy@163.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
erofs_readdir update ctx->pos after filling a batch of dentries
and it may cause dir/files duplication for NFS readdirplus which
depends on ctx->pos to fill dir correctly. So update ctx->pos for
every emitted dirent in erofs_fill_dentries to fix it.
Also fix the update of ctx->pos when the initial file position has
exceeded nameoff.
Fixes: 3e917cc305 ("erofs: make filesystem exportable")
Signed-off-by: Hongnan Li <hongnan.li@linux.alibaba.com>
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20220722082732.30935-1-jefflexu@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
As Wenqing Liu <wenqingliu0120@gmail.com> reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=216285
RIP: 0010:memcpy_erms+0x6/0x10
f2fs_update_meta_page+0x84/0x570 [f2fs]
change_curseg.constprop.0+0x159/0xbd0 [f2fs]
f2fs_do_replace_block+0x5c7/0x18a0 [f2fs]
f2fs_replace_block+0xeb/0x180 [f2fs]
recover_data+0x1abd/0x6f50 [f2fs]
f2fs_recover_fsync_data+0x12ce/0x3250 [f2fs]
f2fs_fill_super+0x4459/0x6190 [f2fs]
mount_bdev+0x2cf/0x3b0
legacy_get_tree+0xed/0x1d0
vfs_get_tree+0x81/0x2b0
path_mount+0x47e/0x19d0
do_mount+0xce/0xf0
__x64_sys_mount+0x12c/0x1a0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The root cause is segment type is invalid, so in f2fs_do_replace_block(),
f2fs accesses f2fs_sm_info::curseg_array with out-of-range segment type,
result in accessing invalid curseg->sum_blk during memcpy in
f2fs_update_meta_page(). Fix this by adding sanity check on segment type
in build_sit_entries().
Reported-by: Wenqing Liu <wenqingliu0120@gmail.com>
Signed-off-by: Chao Yu <chao.yu@oppo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
After commit a7eeb82385 ("f2fs: use bitmap in discard_entry"),
MAX_DISCARD_BLOCKS became obsolete, remove it.
Signed-off-by: Chao Yu <chao.yu@oppo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As Dipanjan Das <mail.dipanjan.das@gmail.com> reported, syzkaller
found a f2fs bug as below:
RIP: 0010:f2fs_new_node_page+0x19ac/0x1fc0 fs/f2fs/node.c:1295
Call Trace:
write_all_xattrs fs/f2fs/xattr.c:487 [inline]
__f2fs_setxattr+0xe76/0x2e10 fs/f2fs/xattr.c:743
f2fs_setxattr+0x233/0xab0 fs/f2fs/xattr.c:790
f2fs_xattr_generic_set+0x133/0x170 fs/f2fs/xattr.c:86
__vfs_setxattr+0x115/0x180 fs/xattr.c:182
__vfs_setxattr_noperm+0x125/0x5f0 fs/xattr.c:216
__vfs_setxattr_locked+0x1cf/0x260 fs/xattr.c:277
vfs_setxattr+0x13f/0x330 fs/xattr.c:303
setxattr+0x146/0x160 fs/xattr.c:611
path_setxattr+0x1a7/0x1d0 fs/xattr.c:630
__do_sys_lsetxattr fs/xattr.c:653 [inline]
__se_sys_lsetxattr fs/xattr.c:649 [inline]
__x64_sys_lsetxattr+0xbd/0x150 fs/xattr.c:649
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
NAT entry and nat bitmap can be inconsistent, e.g. one nid is free
in nat bitmap, and blkaddr in its NAT entry is not NULL_ADDR, it
may trigger BUG_ON() in f2fs_new_node_page(), fix it.
Reported-by: Dipanjan Das <mail.dipanjan.das@gmail.com>
Signed-off-by: Chao Yu <chao.yu@oppo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If the inode has the compress flag, it will fail to use
'chattr -c +m' to remove its compress flag and tag no compress flag.
However, the same command will be successful when executed again,
as shown below:
$ touch foo.txt
$ chattr +c foo.txt
$ chattr -c +m foo.txt
chattr: Invalid argument while setting flags on foo.txt
$ chattr -c +m foo.txt
$ f2fs_io getflags foo.txt
get a flag on foo.txt ret=0, flags=nocompression,inline_data
Fix this by removing some checks in f2fs_setflags_common()
that do not affect the original logic. I go through all the
possible scenarios, and the results are as follows. Bold is
the only thing that has changed.
+---------------+-----------+-----------+----------+
| | file flags |
+ command +-----------+-----------+----------+
| | no flag | compr | nocompr |
+---------------+-----------+-----------+----------+
| chattr +c | compr | compr | -EINVAL |
| chattr -c | no flag | no flag | nocompr |
| chattr +m | nocompr | -EINVAL | nocompr |
| chattr -m | no flag | compr | no flag |
| chattr +c +m | -EINVAL | -EINVAL | -EINVAL |
| chattr +c -m | compr | compr | compr |
| chattr -c +m | nocompr | *nocompr* | nocompr |
| chattr -c -m | no flag | no flag | no flag |
+---------------+-----------+-----------+----------+
Link: https://lore.kernel.org/linux-f2fs-devel/20220621064833.1079383-1-chaoliu719@gmail.com/
Fixes: 4c8ff7095b ("f2fs: support data compression")
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Chao Liu <liuchao@coolpad.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
introduce the below 4 new sysfs node for atomic write statistics.
- current_atomic_write: the total current atomic write block count,
which is not committed yet.
- peak_atomic_write: the peak value of total current atomic write block
count after boot.
- committed_atomic_block: the accumulated total committed atomic write
block count after boot.
- revoked_atomic_block: the accumulated total revoked atomic write block
count after boot.
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
f2fs_gc returns -EINVAL via f2fs_balance_fs when there is enough free
secs after write checkpoint, but with gc_merge enabled, it will cause
the sleep time of gc thread to be set to no_gc_sleep_time even if there
are many dirty segments can be selected.
Signed-off-by: qixiaoyu1 <qixiaoyu1@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
After commit e3b49ea368 ("f2fs: invalidate META_MAPPING before
IPU/DIO write"), invalidate_mapping_pages() will be called to
avoid race condition in between IPU/DIO and readahead for GC.
However, readahead flow is only used for post_read required inode,
so this patch adds check condition to avoids unnecessary page cache
invalidating for non-post_read inode.
Signed-off-by: Chao Yu <chao.yu@oppo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Files created by truncate(1) have a size but no blocks, so
they can be allowed to enable compression.
Signed-off-by: Chao Liu <liuchao@coolpad.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When converting inode to compressed one via ioctl, it needs to check
inline_data, since inline_data flag and compressed flag are incompatible.
Fixes: 4c8ff7095b ("f2fs: support data compression")
Signed-off-by: Chao Yu <chao.yu@oppo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
f2fs_copy_page() is a wrapper around two kmap() + one memcpy() from/to
the mapped pages. It unnecessarily duplicates a kernel API and it makes
use of kmap(), which is being deprecated in favor of kmap_local_page().
Two main problems with kmap(): (1) It comes with an overhead as mapping
space is restricted and protected by a global lock for synchronization and
(2) it also requires global TLB invalidation when the kmap’s pool wraps
and it might block when the mapping space is fully utilized until a slot
becomes available.
With kmap_local_page() the mappings are per thread, CPU local, can take
page faults, and can be called from any context (including interrupts).
It is faster than kmap() in kernels with HIGHMEM enabled. Therefore, its
use in __clone_blkaddrs() is safe and should be preferred.
Delete f2fs_copy_page() and use a plain memcpy_page() in the only one
site calling the removed function. memcpy_page() avoids open coding two
kmap_local_page() + one memcpy() between the two kernel virtual addresses.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Suggested-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Quoted from commit e3b49ea368 ("f2fs: invalidate META_MAPPING before
IPU/DIO write")
"
Encrypted pages during GC are read and cached in META_MAPPING.
However, due to cached pages in META_MAPPING, there is an issue where
newly written pages are lost by IPU or DIO writes.
Thread A - f2fs_gc() Thread B
/* phase 3 */
down_write(i_gc_rwsem)
ra_data_block() ---- (a)
up_write(i_gc_rwsem)
f2fs_direct_IO() :
- down_read(i_gc_rwsem)
- __blockdev_direct_io()
- get_data_block_dio_write()
- f2fs_dio_submit_bio() ---- (b)
- up_read(i_gc_rwsem)
/* phase 4 */
down_write(i_gc_rwsem)
move_data_block() ---- (c)
up_write(i_gc_rwsem)
(a) In phase 3 of f2fs_gc(), up-to-date page is read from storage and
cached in META_MAPPING.
(b) In thread B, writing new data by IPU or DIO write on same blkaddr as
read in (a). cached page in META_MAPPING become out-dated.
(c) In phase 4 of f2fs_gc(), out-dated page in META_MAPPING is copied to
new blkaddr. In conclusion, the newly written data in (b) is lost.
To address this issue, invalidating pages in META_MAPPING before IPU or
DIO write.
"
In previous commit, we missed to cover extent cache hit case, and passed
wrong value for parameter @end of invalidate_mapping_pages(), fix both
issues.
Fixes: 6aa58d8ad2 ("f2fs: readahead encrypted block during GC")
Fixes: e3b49ea368 ("f2fs: invalidate META_MAPPING before IPU/DIO write")
Cc: Hyeong-Jun Kim <hj514.kim@samsung.com>
Signed-off-by: Chao Yu <chao.yu@oppo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds a sysfs entry showing the unusable space in a section
made by zone capacity.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch fixes counting unusable blocks set by zone capacity when
checking the valid block count in a section.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In order to simplify the complicated per-zone capacity, let's support
only one capacity for entire zoned device.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Remove the redundant code and use local variant as the
argument directly. Make it more human-readable.
Signed-off-by: duguowei <duguowei@xiaomi.com>
[Jaegeuk Kim: make code neat]
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Introduce memory mode to supports "normal" and "low" memory modes.
"low" mode is to support low memory devices. Because of the nature of
low memory devices, in this mode, f2fs will try to save memory sometimes
by sacrificing performance. "normal" mode is the default mode and same
as before.
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
__d_add() and __d_move() wake up waiters on dentry::d_wait from within
the i_seq_dir write held region. This violates the PREEMPT_RT
constraints as the wake up acquires wait_queue_head::lock which is a
"sleeping" spinlock on RT.
There is no requirement to do so. __d_lookup_unhash() has cleared
DCACHE_PAR_LOOKUP and dentry::d_wait and returned the now unreachable wait
queue head pointer to the caller, so the actual wake up can be postponed
until the i_dir_seq write side critical section is left. The only
requirement is that dentry::lock is held across the whole sequence
including the wake up. The previous commit includes an analysis why this
is considered safe.
Move the wake up past end_dir_add() which leaves the i_dir_seq write side
critical section and enables preemption.
For non RT kernels there is no difference because preemption is still
disabled due to dentry::lock being held, but it shortens the time between
wake up and unlocking dentry::lock, which reduces the contention for the
woken up waiter.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
__d_lookup_done() wakes waiters on dentry->d_wait. On PREEMPT_RT we are
not allowed to do that with preemption disabled, since the wakeup
acquired wait_queue_head::lock, which is a "sleeping" spinlock on RT.
Calling it under dentry->d_lock is not a problem, since that is also a
"sleeping" spinlock on the same configs. Unfortunately, two of its
callers (__d_add() and __d_move()) are holding more than just ->d_lock
and that needs to be dealt with.
The key observation is that wakeup can be moved to any point before
dropping ->d_lock.
As a first step to solve this, move the wake up outside of the
hlist_bl_lock() held section.
This is safe because:
Waiters get inserted into ->d_wait only after they'd taken ->d_lock
and observed DCACHE_PAR_LOOKUP in flags. As long as they are
woken up (and evicted from the queue) between the moment __d_lookup_done()
has removed DCACHE_PAR_LOOKUP and dropping ->d_lock, we are safe,
since the waitqueue ->d_wait points to won't get destroyed without
having __d_lookup_done(dentry) called (under ->d_lock).
->d_wait is set only by d_alloc_parallel() and only in case when
it returns a freshly allocated in-lookup dentry. Whenever that happens,
we are guaranteed that __d_lookup_done() will be called for resulting
dentry (under ->d_lock) before the wq in question gets destroyed.
With two exceptions wq lives in call frame of the caller of
d_alloc_parallel() and we have an explicit d_lookup_done() on the
resulting in-lookup dentry before we leave that frame.
One of those exceptions is nfs_call_unlink(), where wq is embedded into
(dynamically allocated) struct nfs_unlinkdata. It is destroyed in
nfs_async_unlink_release() after an explicit d_lookup_done() on the
dentry wq went into.
Remaining exception is d_add_ci(). There wq is what we'd found in
->d_wait of d_add_ci() argument. Callers of d_add_ci() are two
instances of ->d_lookup() and they must have been given an in-lookup
dentry. Which means that they'd been called by __lookup_slow() or
lookup_open(), with wq in the call frame of one of those.
Result of d_alloc_parallel() in d_add_ci() is fed to
d_splice_alias(), which either returns non-NULL (and d_add_ci() does
d_lookup_done()) or feeds dentry to __d_add() that will do
__d_lookup_done() under ->d_lock. That concludes the analysis.
Let __d_lookup_unhash():
1) Lock the lookup hash and clear DCACHE_PAR_LOOKUP
2) Unhash the dentry
3) Retrieve and clear dentry::d_wait
4) Unlock the hash and return the retrieved waitqueue head pointer
5) Let the caller handle the wake up.
6) Rename __d_lookup_done() to __d_lookup_unhash_wake() to enforce
build failures for OOT code that used __d_lookup_done() and is not
aware of the new return value.
This does not yet solve the PREEMPT_RT problem completely because
preemption is still disabled due to i_dir_seq being held for write. This
will be addressed in subsequent steps.
An alternative solution would be to switch the waitqueue to a simple
waitqueue, but aside of Linus not being a fan of them, moving the wake up
closer to the place where dentry::lock is unlocked reduces lock contention
time for the woken up waiter.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lkml.kernel.org/r/20220613140712.77932-3-bigeasy@linutronix.de
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
i_dir_seq is a sequence counter with a lock which is represented by the
lowest bit. The writer atomically updates the counter which ensures that it
can be modified by only one writer at a time. This requires preemption to
be disabled across the write side critical section.
On !PREEMPT_RT kernels this is implicit by the caller acquiring
dentry::lock. On PREEMPT_RT kernels spin_lock() does not disable preemption
which means that a preempting writer or reader would live lock. It's
therefore required to disable preemption explicitly.
An alternative solution would be to replace i_dir_seq with a seqlock_t for
PREEMPT_RT, but that comes with its own set of problems due to arbitrary
lock nesting. A pure sequence count with an associated spinlock is not
possible because the locks held by the caller are not necessarily related.
As the critical section is small, disabling preemption is a sensible
solution.
Reported-by: Oleg.Karfich@wago.com
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lkml.kernel.org/r/20220613140712.77932-2-bigeasy@linutronix.de
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
All callers of d_alloc_parallel() must make sure that resulting
in-lookup dentry (if any) will encounter __d_lookup_done() before
the final dput(). d_add_ci() might end up creating in-lookup
dentries; they are fed to d_splice_alias(), which will normally
make sure they meet __d_lookup_done(). However, it is possible
to end up with d_splice_alias() failing with ERR_PTR(-ELOOP)
without having done so. It takes a corrupted ntfs or case-insensitive
xfs image, but neither should end up with memory corruption...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
s/heartbaet/heartbeat
Link: https://lkml.kernel.org/r/4d4a6786e8ad522bfad6d2401b7f6634f8af0e5d.1658436259.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use bitmap_zero() instead of hand-writing it. It is less verbose.
While at it, add an explicit #include <linux/bitmap.h>.
Link: https://lkml.kernel.org/r/86d2a027c319db12055c98f00c65f7d01e703722.1658436259.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "ocfs2: A few clean_ups", v2.
__ocfs2_node_map_set_bit() and __ocfs2_node_map_clear_bit() are just
wrapper around set_bit() and clear_bit().
The leading __ also makes think that these functions are non-atomic just
like __set_bit() and __clear_bit().
So, just remove these wrappers and call set_bit() and clear_bit()
directly.
Link: https://lkml.kernel.org/r/cover.1658436259.git.christophe.jaillet@wanadoo.fr
Link: https://lkml.kernel.org/r/bd1429c84ec7d174c96dbb67a2b42b1b456d9394.1658436259.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
* /proc/${pid}/net status
* removing PDE vs last close stuff (again!)
* random small stuff
Link: https://lkml.kernel.org/r/YtwrM6sDC0OQ53YB@localhost.localdomain
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add a function which can be used to read fragments in the readahead call.
This function is necessary because filesystems built with the -tailends
(or -always-use-fragments) option may have fragments present which cannot
be currently handled.
Link: https://lkml.kernel.org/r/20220617083810.337573-5-hsinyi@chromium.org
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Cc: Hou Tao <houtao1@huawei.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miao Xie <miaoxie@huawei.com>
Cc: Xiongwei Song <Xiongwei.Song@windriver.com>
Cc: Zhang Yi <yi.zhang@huawei.com>
Cc: Zheng Liang <zhengliang6@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Implement readahead callback for squashfs. It will read datablocks which
cover pages in readahead request. For a few cases it will not mark page
as uptodate, including:
- file end is 0.
- zero filled blocks.
- current batch of pages isn't in the same datablock.
- decompressor error.
Otherwise pages will be marked as uptodate. The unhandled pages will be
updated by readpage later.
Link: https://lkml.kernel.org/r/20220617083810.337573-4-hsinyi@chromium.org
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Reported-by: Matthew Wilcox <willy@infradead.org>
Reported-by: Phillip Lougher <phillip@squashfs.org.uk>
Reported-by: Xiongwei Song <Xiongwei.Song@windriver.com>
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Hou Tao <houtao1@huawei.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Miao Xie <miaoxie@huawei.com>
Cc: Zhang Yi <yi.zhang@huawei.com>
Cc: Zheng Liang <zhengliang6@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Squashfs_readahead uses the "file direct" version of the page actor, and
so build it unconditionally.
Link: https://lkml.kernel.org/r/20220617083810.337573-3-hsinyi@chromium.org
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Hou Tao <houtao1@huawei.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miao Xie <miaoxie@huawei.com>
Cc: Xiongwei Song <Xiongwei.Song@windriver.com>
Cc: Zhang Yi <yi.zhang@huawei.com>
Cc: Zheng Liang <zhengliang6@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
