A single NFSv4 WRITE compound can often have three operations:
PUTFH, WRITE, then GETATTR.
When the WRITE payload is sent in a Read chunk, the client places
the GETATTR in the inline part of the RPC/RDMA message, just after
the WRITE operation (sans payload). The position value in the Read
chunk enables the receiver to insert the Read chunk at the correct
place in the received XDR stream; that is between the WRITE and
GETATTR.
According to RFC 8166, an NFS/RDMA client does not have to add XDR
round-up to the Read chunk that carries the WRITE payload. The
receiver adds XDR round-up padding if it is absent and the
receiver's XDR decoder requires it to be present.
Commit 193bcb7b37 ("svcrdma: Populate tail iovec when receiving")
attempted to add support for receiving such a compound so that just
the WRITE payload appears in rq_arg's page list, and the trailing
GETATTR is placed in rq_arg's tail iovec. (TCP just strings the
whole compound into the head iovec and page list, without regard
to the alignment of the WRITE payload).
The server transport logic also had to accommodate the optional XDR
round-up of the Read chunk, which it did simply by lengthening the
tail iovec when round-up was needed. This approach is adequate for
the NFSv2 and NFSv3 WRITE decoders.
Unfortunately it is not sufficient for nfsd4_decode_write. When the
Read chunk length is a couple of bytes less than PAGE_SIZE, the
computation at the end of nfsd4_decode_write allows argp->pagelen to
go negative, which breaks the logic in read_buf that looks for the
tail iovec.
The result is that a WRITE operation whose payload length is just
less than a multiple of a page succeeds, but the subsequent GETATTR
in the same compound fails with NFS4ERR_OP_ILLEGAL because the XDR
decoder can't find it. Clients ignore the error, but they must
update their attribute cache via a separate round trip.
As nfsd4_decode_write appears to expect the payload itself to always
have appropriate XDR round-up, have svc_rdma_build_normal_read_chunk
add the Read chunk XDR round-up to the page_len rather than
lengthening the tail iovec.
Reported-by: Olga Kornievskaia <kolga@netapp.com>
Fixes: 193bcb7b37 ("svcrdma: Populate tail iovec when receiving")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
There is now only one caller left for svcxdr_dupstr() and this is inside
of an #ifdef, so we can get a warning when the option is disabled:
fs/nfsd/nfs4xdr.c:241:1: error: 'svcxdr_dupstr' defined but not used [-Werror=unused-function]
This changes the remaining caller to use a nicer IS_ENABLED() check,
which lets the compiler drop the unused code silently.
Fixes: e40d99e6183e ("NFSD: Clean up symlink argument XDR decoders")
Suggested-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The time values in stat and inode may differ for overlayfs and stat time
values are the correct ones to use. This is also consistent with the fact
that fill_post_wcc() also stores stat time values.
This means introducing a stat call that could fail, where previously we
were just copying values out of the inode. To be conservative about
changing behavior, we fall back to copying values out of the inode in
the error case. It might be better just to clear fh_pre_saved (though
note the BUG_ON in set_change_info).
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The values of stat->mtime and inode->i_mtime may differ for overlayfs
and stat->mtime is the correct value to use when encoding getattr.
This is also consistent with the fact that other attr times are also
encoded from stat values.
Both callers of lease_get_mtime() already have the value of stat->mtime,
so the only needed change is that lease_get_mtime() will not overwrite
this value with inode->i_mtime in case the inode does not have an
exclusive lease.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
A client that sends more than a hundred ops in a single compound
currently gets an rpc-level GARBAGE_ARGS error.
It would be more helpful to return NFS4ERR_RESOURCE, since that gives
the client a better idea how to recover (for example by splitting up the
compound into smaller compounds).
This is all a bit academic since we've never actually seen a reason for
clients to send such long compounds, but we may as well fix it.
While we're there, just use NFSD4_MAX_OPS_PER_COMPOUND == 16, the
constant we already use in the 4.1 case, instead of hard-coding 100.
Chances anyone actually uses even 16 ops per compound are small enough
that I think there's a neglible risk or any regression.
This fixes pynfs test COMP6.
Reported-by: "Lu, Xinyu" <luxy.fnst@cn.fujitsu.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Includes only a small fix for some conflicting symbols, aligning CRIS
with other platforms.
-----BEGIN PGP SIGNATURE-----
iEYEABECAAYFAlp5frcACgkQ31LbvUHyf1e9rACbBugJIN2v+wHZ2+XmQOW27hDp
V/IAn1HkpGdwyxxCZ6JZnr/XAtCi1RhJ
=EP69
-----END PGP SIGNATURE-----
mergetag object 6e0377212c
type commit
tag cris-for-4.16-urgent
tagger Jesper Nilsson <jesper@jni.nu> 1518084841 +0100
CRIS urgent breakage fix for 4.16
The main Makefile for the CRIS port was
overzealously scrubbed in 4.15-rc3,
breaking the build for all CRIS SoCs.
-----BEGIN PGP SIGNATURE-----
iEYEABECAAYFAlp8I9IACgkQ31LbvUHyf1dIiACeP/H/3asKo7JgidYmA1gkEk4A
oiwAn0QXaFm5ljxuBSd88FIr4E5vfwdD
=fjIf
-----END PGP SIGNATURE-----
Merge tags 'cris-for-4.16' and 'cris-for-4.16-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris
Pull CRIS updates and fixes from Jesper Nilsson:
- a small fix for some conflicting symbols, aligning CRIS with other
platforms.
- fix build breakage regression for all CRIS SoCs. The main Makefile
for the CRIS port was overzealously scrubbed in 4.15-rc3.
* tag 'cris-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris:
cris: Fix conflicting types for _etext, _edata, _end
* tag 'cris-for-4.16-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris:
CRIS: Restore mistakenly cleared kernel Makefile
ath.git fixes for 4.16. Major changes:
ath10k
* correct firmware RAM dump length for QCA6174/QCA9377
* add new QCA988X device id
* fix a kernel panic during pci probe
* revert a recent commit which broke ath10k firmware metadata parsing
ath9k
* fix a noise floor regression introduced during the merge window
* add new device id
Al Viro discovered a bug in the removing of function probes where if it had
a '*' at the beginning, it would fail to find any matches. That is, because
it reset the glob search string to the the initial string with a "MATCH_END"
type, instead of skipping the wildcard "*" it included it, where it would
not match any functions because "*" was being treated as a normal character
and not a wildcard one.
Link: http://lkml.kernel.org/r/20180127031706.GE13338@ZenIV.linux.org.uk
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Al Viro discovered a bug in the glob ftrace filtering code where "*a*b" is
treated the same as "a*b", and functions that would be selected by "*a*b"
but not "a*b" are not selected with "*a*b".
Add tests for patterns "*a*b" and "a*b*" to the glob selftest.
Link: http://lkml.kernel.org/r/20180127170748.GF13338@ZenIV.linux.org.uk
Cc: Shuah Khan <shuah@kernel.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
If a probe is attached to a static function that is in multiple files with
the same name, removing it by name will remove all instances:
# grep jump_label_unlock set_ftrace_filter
jump_label_unlock:traceoff:unlimited
jump_label_unlock:traceoff:unlimited
# echo '!jump_label_unlock:traceoff' >> set_ftrace_filter
# grep jump_label_unlock set_ftrace_filter
#
But the loop in reset_ftrace_filter will try to remove multiple instances
multiple times. If this happens the second time will error and cause the
test to fail.
At each iteration of the loop, check to see if the probe being removed still
exists.
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
If a function probe in set_ftrace_filter belongs to a module, it will
contain the module name. Like:
wmi_query_block [wmi]:traceoff:unlimited
But writing:
'!wmi_query_block [wmi]:traceoff' > set_ftrace_filter
will cause an error. We still need to write:
'!wmi_query_block:traceoff' > set_ftrace_filter
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Al Viro reported:
For substring - sure, but what about something like "*a*b" and "a*b"?
AFAICS, filter_parse_regex() ends up with identical results in both
cases - MATCH_GLOB and *search = "a*b". And no way for the caller
to tell one from another.
Testing this with the following:
# cd /sys/kernel/tracing
# echo '*raw*lock' > set_ftrace_filter
bash: echo: write error: Invalid argument
With this patch:
# echo '*raw*lock' > set_ftrace_filter
# cat set_ftrace_filter
_raw_read_trylock
_raw_write_trylock
_raw_read_unlock
_raw_spin_unlock
_raw_write_unlock
_raw_spin_trylock
_raw_spin_lock
_raw_write_lock
_raw_read_lock
Al recommended not setting the search buffer to skip the first '*' unless we
know we are not using MATCH_GLOB. This implements his suggested logic.
Link: http://lkml.kernel.org/r/20180127170748.GF13338@ZenIV.linux.org.uk
Cc: stable@vger.kernel.org
Fixes: 60f1d5e3ba ("ftrace: Support full glob matching")
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Suggsted-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
__unregister_ftrace_function_probe() will incorrectly parse the glob filter
because it resets the search variable that was setup by filter_parse_regex().
Al Viro reported this:
After that call of filter_parse_regex() we could have func_g.search not
equal to glob only if glob started with '!' or '*'. In the former case
we would've buggered off with -EINVAL (not = 1). In the latter we
would've set func_g.search equal to glob + 1, calculated the length of
that thing in func_g.len and proceeded to reset func_g.search back to
glob.
Suppose the glob is e.g. *foo*. We end up with
func_g.type = MATCH_MIDDLE_ONLY;
func_g.len = 3;
func_g.search = "*foo";
Feeding that to ftrace_match_record() will not do anything sane - we
will be looking for names containing "*foo" (->len is ignored for that
one).
Link: http://lkml.kernel.org/r/20180127031706.GE13338@ZenIV.linux.org.uk
Cc: stable@vger.kernel.org
Fixes: 3ba0092971 ("ftrace: Introduce ftrace_glob structure")
Reviewed-by: Dmitry Safonov <0x7f454c46@gmail.com>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Jakub Kicinski says:
====================
nfp: fix disabling TC offloads in flower, max TSO segs and module version
This set corrects the way nfp deals with the NETIF_F_HW_TC flag.
It has slipped the review that flower offload does not currently
refuse disabling this flag when filter offload is active.
nfp's flower offload does not actually keep track of how many filters
for each port are offloaded. The accounting of the number of filters
is added to the nfp core structures, and BPF moved to use these
structures as well.
If users are allowed to disable TC offloads while filters are active,
not only is it incorrect behaviour, but actually the NFP will never
be told to remove the flows, leading to use-after-free when stats
arrive.
Fourth patch makes sure we declare the max number of TSO segments.
FW should drop longer packets cleanly (otherwise this would be a
security problem for untrusted VFs) but dropping longer TSO frames
is not nice and driver should prevent them from being generated.
Last small addition populates MODULE_VERSION with kernel version.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
DKMS and similar out-of-tree module replacement services use
module version to make sure the out-of-tree software is not
older than the module shipped with the kernel. We use the
kernel version in ethtool -i output, put it into MODULE_VERSION
as well.
Reported-by: Jan Gutter <jan.gutter@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Most FWs limit the number of TSO segments a frame can produce
to 64. This is for fairness and efficiency (of FW datapath)
reasons. If a frame with larger number of segments is submitted
the FW will drop it.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
All netdevs which can accept TC offloads must implement
.ndo_set_features(). nfp_reprs currently do not do that, which
means hw-tc-offload can be turned on and off even when offloads
are active.
Whether the offloads are active is really a question to nfp_ports,
so remove the per-app tc_busy callback indirection thing, and
simply count the number of offloaded items in nfp_port structure.
Fixes: 8a2768732a ("nfp: provide infrastructure for offloading flower based TC filters")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Tested-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
nfp_port is a structure which represents an ASIC port, both
PCIe vNIC (on a PF or a VF) or the external MAC port. vNIC
netdev (struct nfp_net) and pure representor netdev (struct
nfp_repr) both have a pointer to this structure. nfp_reprs
always have a port associated. nfp_nets, however, only represent
a device port in legacy mode, where they are considered the
MAC port. In switchdev mode they are just the CPU's side of
the PCIe link.
By definition TC offloads only apply to device ports. Don't
set the flag on vNICs without a port (i.e. in switchdev mode).
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Tested-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Upcoming changes will require all netdevs supporting TC offloads
to have a full struct nfp_port. Require those for BPF offload.
The operation without management FW reporting information about
Ethernet ports is something we only support for very old and very
basic NIC firmwares anyway.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Tested-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski says:
====================
First patch in this series fixes applying the relocation to immediate
load instructions in the NFP JIT.
The remaining patches come from Quentin. Small addition to libbpf
makes sure it recognizes all standard section names. Makefile in
bpftool/Documentation is improved to explicitly check for rst2man
being installed on the system, otherwise we risk installing empty
files. Man page for bpftool-map is corrected to include program
as a potential value for map of programs.
Last two patches are slightly longer, those update bash completions to
include this release cycle's additions from Roman. Maybe the use of
Fixes tags is slightly frivolous there, but having bash completions
which don't cover all commands and options could be disruptive to work
flow for users.
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add bash completion for "bpftool cgroup" command family. While at it,
also fix the formatting of some keywords in the man page for cgroups.
Fixes: 5ccda64d38 ("bpftool: implement cgroup bpf operations")
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add bash completion for bpftool command `prog load`. Completion for this
command is easy, as it only takes existing file paths as arguments.
Fixes: 49a086c201 ("bpftool: implement prog load command")
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Specify in the documentation that when using bpftool to update a map of
type BPF_MAP_TYPE_PROG_ARRAY, the syntax for the program used as a value
should use the "id|tag|pinned" keywords convention, as used with
"bpftool prog" commands.
Fixes: ff69c21a85 ("tools: bpftool: add documentation")
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
If rst2man is not available on the system, running `make doc` from the
bpftool directory fails with an error message. However, it creates empty
manual pages (.8 files in this case). A subsequent call to `make
doc-install` would then succeed and install those empty man pages on the
system.
To prevent this, raise a Makefile error and exit immediately if rst2man
is not available before generating the pages from the rst documentation.
Fixes: ff69c21a85 ("tools: bpftool: add documentation")
Reported-by: Jason van Aaardt <jason.vanaardt@netronome.com>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
It seems that the type guessing feature for libbpf, based on the name of
the ELF section the program is located in, was inspired from
samples/bpf/prog_load.c, which was not used by any sample for loading
programs of certain types such as TC actions and classifiers, or
LWT-related types. As a consequence, libbpf is not able to guess the
type of such programs and to load them automatically if type is not
provided to the `bpf_load_prog()` function.
Add ELF section names associated to those eBPF program types so that
they can be loaded with e.g. bpftool as well.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Immed relocation is missing a shift which means for larger
offsets the lower and higher part of the address would be
ORed together.
Fixes: ce4ebfd859 ("nfp: bpf: add helpers for updating immediate instructions")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
* acpi-video:
ACPI / video: Use true for boolean value
* acpi-battery:
ACPI / battery: Add quirk for Asus UX360UA and UX410UAK
* acpi-cppc:
ACPI / CPPC: Use 64-bit arithmetic instead of 32-bit
* acpi-tables:
ACPI: SPCR: Make SPCR available to x86
ACPI / tables: Add IORT to injectable table list
* acpi-bus:
ACPI / bus: Parse tables as term_list for Dell XPS 9570 and Precision M5530
ACPI / scan: Use acpi_bus_get_status() to initialize ACPI_TYPE_DEVICE devs
ACPI / bus: Do not call _STA on battery devices with unmet dependencies
PCI: acpiphp_ibm: prepare for acpi_get_object_info() no longer returning status
ACPI: export acpi_bus_get_status_handle()
* acpi-processor:
ACPI / processor: Set default C1 idle state description
ACPI: processor_perflib: Do not send _PPC change notification if not ready
* acpica:
ACPICA: Update version to 20180105
ACPICA: All acpica: Update copyrights to 2018
ACPICA: Add a missing pair of parentheses
ACPICA: Prefer ACPI_TO_POINTER() over ACPI_ADD_PTR()
ACPICA: Avoid NULL pointer arithmetic
ACPICA: Linux: add support for X32 ABI compilation
Commit 0fbc0b67a8 ("cris: remove arch specific early DT functions")
was a bit overzealous in removing the CRIS DT handling,
and the complete contents of the Makefile was erased
instead of just the line for the devicetree file.
This lead to a complete link failure for all SoCs in
the CRIS port due to missing symbols.
Restore the contents except the line for the devicetree file.
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Fixes: 0fbc0b67a8
Commit 82616f9599 ("xen: remove tests for pvh mode in pure pv paths")
removed the check for autotranslation from {set,clear}_foreign_p2m_mapping
but those are called by grant-table.c also on PVH/HVM guests.
Cc: <stable@vger.kernel.org> # 4.14
Fixes: 82616f9599 ("xen: remove tests for pvh mode in pure pv paths")
Signed-off-by: Simon Gaiser <simon@invisiblethingslab.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
* pm-cpufreq:
arm: imx: Add MODULE_ALIAS for cpufreq
cpufreq: Add and use cpufreq_for_each_{valid_,}entry_idx()
cpufreq: intel_pstate: Enable HWP during system resume on CPU0
cpufreq: scpi: fix error return code in scpi_cpufreq_init()
cpufreq: scpi: fix static checker warning cdev isn't an ERR_PTR
cpufreq: remove at32ap-cpufreq
cpufreq: AMD: Ignore the check for ProcFeedback in ST/CZ
cpufreq: Skip cpufreq resume if it's not suspended
* pm-cpuidle:
x86: PM: Make APM idle driver initialize polling state
* pm-domains:
PM / domains: Fix up domain-idle-states OF parsing
Without this, the imx6q-cpufreq driver isn't loaded
automatically when built as a module
Tested on wandboard quad with a fedora 27 kernel rpm
Signed-off-by: Nicolas Chauvet <kwizart@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pointer subtraction is slow and tedious. Therefore, replace all instances
where cpufreq_for_each_{valid_,}entry loops contained such substractions
with an iteration macro providing an index to the frequency_table entry.
Suggested-by: Al Viro <viro@ZenIV.linux.org.uk>
Link: http://lkml.kernel.org/r/20180120020237.GM13338@ZenIV.linux.org.uk
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When maxcpus=1 is in the kernel command line, the BP is responsible
for re-enabling the HWP - because currently only the APs invoke
intel_pstate_hwp_enable() during their online process - which might
put the system into unstable state after resume.
Fix this by enabling the HWP explicitly on BP during resume.
Reported-by: Doug Smythies <dsmythies@telus.net>
Suggested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Yu Chen <yu.c.chen@intel.com>
[ rjw: Subject/changelog, minor modifications ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix to return a negative error code from the clk_get() error handling
case instead of 0, as done elsewhere in this function.
Fixes: 343a8d17fa (cpufreq: scpi: remove arm_big_little dependency)
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There's no need to be printing a raw kernel pointer to the kernel log at
every boot. So just remove it, and change the whole message to use the
correct dev_info() call at the same time.
Reported-by: Wang Qize <wang_qize@venustech.com.cn>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The ARCH_WANTS_PROT_NUMA_PROT_NONE symbol was removed by
commit 6a33979d5b ("mm: remove misleading ARCH_USES_NUMA_PROT_NONE"),
but S390 still selects it.
Remove the ARCH_WANTS_PROT_NUMA_PROT_NONE select from the S390 symbol.
Discovered with the
https://github.com/ulfalizer/Kconfiglib/blob/master/examples/list_undefined.py
script.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Commit 76d837a4c0 ("KVM: PPC: Book3S PR: Don't include SPAPR TCE code
on non-pseries platforms") added a reference to the globally undefined
symbol PPC_SERIES. Looking at the rest of the commit, PPC_PSERIES was
probably intended.
Change PPC_SERIES to PPC_PSERIES.
Discovered with the
https://github.com/ulfalizer/Kconfiglib/blob/master/examples/list_undefined.py
script.
Fixes: 76d837a4c0 ("KVM: PPC: Book3S PR: Don't include SPAPR TCE code on non-pseries platforms")
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
tracepoint tcp_send_reset requires a full socket to work. However, it
may be called when in TCP_TIME_WAIT:
case TCP_TW_RST:
tcp_v6_send_reset(sk, skb);
inet_twsk_deschedule_put(inet_twsk(sk));
goto discard_it;
To avoid this problem, this patch checks the socket with sk_fullsock()
before calling trace_tcp_send_reset().
Fixes: c24b14c46b ("tcp: add tracepoint trace_tcp_send_reset")
Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In Kernel 4.15.0+, Netem does not work properly.
Netem setup:
tc qdisc add dev h1-eth0 root handle 1: netem delay 10ms 2ms
Result:
PING 172.16.101.2 (172.16.101.2) 56(84) bytes of data.
64 bytes from 172.16.101.2: icmp_seq=1 ttl=64 time=22.8 ms
64 bytes from 172.16.101.2: icmp_seq=2 ttl=64 time=10.9 ms
64 bytes from 172.16.101.2: icmp_seq=3 ttl=64 time=10.9 ms
64 bytes from 172.16.101.2: icmp_seq=5 ttl=64 time=11.4 ms
64 bytes from 172.16.101.2: icmp_seq=6 ttl=64 time=11.8 ms
64 bytes from 172.16.101.2: icmp_seq=4 ttl=64 time=4303 ms
64 bytes from 172.16.101.2: icmp_seq=10 ttl=64 time=11.2 ms
64 bytes from 172.16.101.2: icmp_seq=11 ttl=64 time=10.3 ms
64 bytes from 172.16.101.2: icmp_seq=7 ttl=64 time=4304 ms
64 bytes from 172.16.101.2: icmp_seq=8 ttl=64 time=4303 ms
Patch:
(rnd % (2 * sigma)) - sigma was overflowing s32. After applying the
patch, I found following output which is desirable.
PING 172.16.101.2 (172.16.101.2) 56(84) bytes of data.
64 bytes from 172.16.101.2: icmp_seq=1 ttl=64 time=21.1 ms
64 bytes from 172.16.101.2: icmp_seq=2 ttl=64 time=8.46 ms
64 bytes from 172.16.101.2: icmp_seq=3 ttl=64 time=9.00 ms
64 bytes from 172.16.101.2: icmp_seq=4 ttl=64 time=11.8 ms
64 bytes from 172.16.101.2: icmp_seq=5 ttl=64 time=8.36 ms
64 bytes from 172.16.101.2: icmp_seq=6 ttl=64 time=11.8 ms
64 bytes from 172.16.101.2: icmp_seq=7 ttl=64 time=8.11 ms
64 bytes from 172.16.101.2: icmp_seq=8 ttl=64 time=10.0 ms
64 bytes from 172.16.101.2: icmp_seq=9 ttl=64 time=11.3 ms
64 bytes from 172.16.101.2: icmp_seq=10 ttl=64 time=11.5 ms
64 bytes from 172.16.101.2: icmp_seq=11 ttl=64 time=10.2 ms
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
It was discovered that simple program which indefinitely sends 200b UDP
packets and runs on TI AM574x SoC (SMP) under RT Kernel triggers network
watchdog timeout in TI CPSW driver (<6 hours run). The network watchdog
timeout is triggered due to race between cpsw_ndo_start_xmit() and
cpsw_tx_handler() [NAPI]
cpsw_ndo_start_xmit()
if (unlikely(!cpdma_check_free_tx_desc(txch))) {
txq = netdev_get_tx_queue(ndev, q_idx);
netif_tx_stop_queue(txq);
^^ as per [1] barier has to be used after set_bit() otherwise new value
might not be visible to other cpus
}
cpsw_tx_handler()
if (unlikely(netif_tx_queue_stopped(txq)))
netif_tx_wake_queue(txq);
and when it happens ndev TX queue became disabled forever while driver's HW
TX queue is empty.
Fix this, by adding smp_mb__after_atomic() after netif_tx_stop_queue()
calls and double check for free TX descriptors after stopping ndev TX queue
- if there are free TX descriptors wake up ndev TX queue.
[1] https://www.kernel.org/doc/html/latest/core-api/atomic_ops.html
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change will guard against a double free in the case that the
buffers were previously freed at some other time, such as during
a device reset. It resolves a kernel oops that occurred when changing
the VNIC device's MTU.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
At some point, a check was added to exit the polling routine during resets.
This makes sense for most reset conditions, but for a non-fatal error, we
expect the polling routine to continue running to properly clean up the rx
queues. This patch checks if we are performing a non-fatal reset and if we
are, continues normal polling operation.
Signed-off-by: John Allen <jallen@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the number of queues per enabled TC and report available queues
to the kernel without having to limit them to the max RSS limit so
they are available to be mapped for XPS. This allows a queue per
processing thread available for handling traffic for the given
traffic class.
Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Because of differences in how ipv4 and ipv6 handle fib lookups,
verification of nexthops with onlink flag need to default to the main
table rather than the local table used by IPv4. As it stands an
address within a connected route on device 1 can be used with
onlink on device 2. Updating the table properly rejects the route
due to the egress device mismatch.
Update the extack message as well to show it could be a device
mismatch for the nexthop spec.
Fixes: fc1e64e109 ("net/ipv6: Add support for onlink flag")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Verification of nexthops with onlink flag need to handle unreachable
routes. The lookup is only intended to validate the gateway address
is not a local address and if the gateway resolves the egress device
must match the given device. Hence, hitting any default reject route
is ok.
Fixes: fc1e64e109 ("net/ipv6: Add support for onlink flag")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the appropriate SPDX license tags to the Sun network drivers
as outlined in Documentation/process/license-rules.rst.
Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
AF_RXRPC is incorrectly sending back to the server any abort it receives
for a client connection. This is due to the final-ACK offload to the
connection event processor patch. The abort code is copied into the
last-call information on the connection channel and then the event
processor is set.
Instead, the following should be done:
(1) In the case of a final-ACK for a successful call, the ACK should be
scheduled as before.
(2) In the case of a locally generated ABORT, the ABORT details should be
cached for sending in response to further packets related to that
call and no further action scheduled at call disconnect time.
(3) In the case of an ACK received from the peer, the call should be
considered dead, no ABORT should be transmitted at this time. In
response to further non-ABORT packets from the peer relating to this
call, an RX_USER_ABORT ABORT should be transmitted.
(4) In the case of a call killed due to network error, an RX_USER_ABORT
ABORT should be cached for transmission in response to further
packets, but no ABORT should be sent at this time.
Fixes: 3136ef49a1 ("rxrpc: Delay terminal ACK transmission on a client call")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
