zconfdump(), which is used for debugging, can't recognize P_SELECT,
P_RANGE and P_MENU (if associated with a symbol, aka "menuconfig"),
and output something like this:
config X86
boolean
default y
unknown prop 6!
unknown prop 6!
unknown prop 6!
...
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
- fix a typo in documentation
- fix a typo in a printk on error
- fix comments in dialog_inputbox()
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
A symbol's value won't be recalc-ed until we save config file or
enter the menu where the symbol sits.
So If I enable OPTIMIZE_FOR_SIZE, and search FUNCTION_GRAPH_TRACER:
Symbol: FUNCTION_GRAPH_TRACER [=y]
Prompt: Kernel Function Graph Tracer
Defined at kernel/trace/Kconfig:140
Depends on: ... [=y] && (!X86_32 [=y] || !CC_OPTIMIZE_FOR_SIZE [=y])
...
From the dependency it should result in FUNCTION_GRAPH_TRACER=n,
but it still shows FUNCTION_GRAPH_TRACER=y.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Michal Marek <mmarek@suse.cz>
LKML-Reference: <20100203162014.GA10956@sepie.suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Doing the following:
make LSMOD=file localmodconfig
Will make the streamline-config code use the given file instead of
lsmod. If the file is an executable, it will execute it, otherwise
it will read it as text.
make LSMOD=/my/local/path/lsmod localmodconfig
The above will execute the lsmod in /my/local/path instead of the
lsmods that may be located elsewhere.
make LSMOD=embedded_board_lsmod localmodconfig
The above will read the "embedded_board_lsmod" as a text file. This
is useful if you are doing a cross compile and need to run the
config against modules that exist on an embedded device.
Note, if the LSMOD= file does is not a path, it will add the
path to the object directory. That is, the above example will look
for "embedded_board_lsmod" in the directory that the binary will
be built in (the O=dir directory).
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
On branch config/linus
Distributions now have lsmod in /bin instead of /sbin. But to handle
both cases, we look for it in /sbin /bin /usr/bin and /usr/sbin.
If lsmod is not found in any of those paths, it defaults to use
just lsmod and hopes that it lies in the path of the user.
Tested-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
While looking for something else I noticed that the symbol
hash function used by kconfig is quite poor. It doesn't
use any of the standard hash techniques but simply
adds up the string and then uses power of two masking,
which is both known to perform poorly.
The current x86 kconfig has over 7000 symbols.
When I instrumented it showed that the minimum hash chain
length was 16 and a significant number of them was over
30.
It didn't help that the hash table size was only 256 buckets.
This patch increases the hash table size to a larger prime
and switches to a FNV32 hash. I played around with a couple of hash
functions, but that one seemed to perform best with reasonable
hash table sizes.
Increasing the hash table size even further didn't
seem like a good idea, because there are a couple of global
walks which walk the complete hash table.
I also moved the unnamed bucket to 0. It's still the longest
of all the buckets (44 entries), but hopefully it's not
often hit except for the global walk which doesn't care.
The result is a much nicer distribution:
(first column bucket length, second number of buckets with that length)
1: 3505
2: 1236
3: 294
4: 52
5: 3
47: 1 <--- this is the unnamed symbols bucket
There are still some 5+ buckets, but increasing the hash table
even more would be likely not worth it.
This also cleans up the code slightly by removing hard coded
magic numbers.
I didn't notice a big performance difference either way
on my Nehalem system, but I presume it'll help somewhat
on slower systems.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
This patch fixes two problems reported by Jan Engelhardt:
1) Border is now properly placed, to always be visible
2) Long menu items are properly displayed
Reported-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: Nir Tzachar <nir.tzachar@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
scripts/kconfig/nconf.gui.c:23: warning: no previous prototype for 'set_normal_colors'
scripts/kconfig/nconf.gui.c:68: warning: no previous prototype for 'normal_color_theme'
scripts/kconfig/nconf.gui.c💯 warning: no previous prototype for 'no_colors_theme'
scripts/kconfig/nconf.c:455: warning: no previous prototype for 'process_special_keys'
scripts/kconfig/nconf.c:487: warning: no previous prototype for 'get_next_hot'
scripts/kconfig/nconf.c:506: warning: no previous prototype for 'canbhot'
scripts/kconfig/nconf.c:514: warning: no previous prototype for 'is_hot'
scripts/kconfig/nconf.c:522: warning: no previous prototype for 'make_hot'
scripts/kconfig/nconf.c:582: warning: no previous prototype for 'item_make'
scripts/kconfig/nconf.c:626: warning: no previous prototype for 'item_add_str'
scripts/kconfig/nconf.c:656: warning: no previous prototype for 'item_tag'
scripts/kconfig/nconf.c:668: warning: no previous prototype for 'curses_item_index'
scripts/kconfig/nconf.c:673: warning: no previous prototype for 'item_data'
scripts/kconfig/nconf.c:684: warning: no previous prototype for 'item_is_tag'
scripts/kconfig/nconf.c:691: warning: no previous prototype for 'set_config_filename'
Signed-off-by: Michal Marek <mmarek@suse.cz>
This patch was inspired by the kernel projects page, where an ncurses
replacement for menuconfig was mentioned (by Sam Ravnborg).
Building on menuconfig, this patch implements a more modern look
interface using ncurses and ncurses' satellite libraries (menu, panel,
form). The implementation does not depend on lxdialog, which is
currently distributed with the kernel.
Signed-off-by: Nir Tzachar <nir.tzachar@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Help text for certain config options is very extensive (the text
includes the names of all other options the option in question depends
on). Long lines are not wrapped, making it impossible to see the list
without scrolling horizontally.
This patch adds some logic which wraps help screen lines at word
boundaries to prevent truncating.
Tested by running
ARCH=powerpc make menuconfig O=/tmp/build
which shows that the long lines are now wrapped, and
ARCH=powerpc make xconfig O=/tmp/build
to demonstrate that it still compiles and operates as expected.
Signed-off-by: Vadim Bendebury <vbendeb@google.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
The streamline_config.pl misses the if conditions for checking
dependencies. For Kconfigs with the following construct:
if MEDIA_SUPPORT
config VIDEO_DEV
[...]
If VIDEO_DEV was enabled, the script will miss the fact that MEDIA_SUPPORT
is also needed.
This patch changes streamline_config.pl to include if conditions into
the dependencies of configs.
Reported-by: Anton Blanchard <anton@sambo.org>
Tested-by: Anton Blanchard <anton@sambo.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If someone downloads a brand new kernel and runs localmodconfig or
localyesconfig, the ending result will report:
*** Error during update of the kernel configuration.
This is because localmodconfig and localyesconfig must create the
include/generated directory to place the autoconf.h file.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
To make it easier for module-init-tools and scripts like mkinitrd to
distinguish builtin and missing modules, install a modules.builtin file
listing all builtin modules. This is done by generating an additional
config file (tristate.conf) with tristate options set to uppercase 'Y'
or 'M'. If we source that config file, the builtin modules appear in
obj-Y.
Signed-off-by: Michal Marek <mmarek@suse.cz>
The toplevel Makefile creates the directory if it runs silentoldconfig
automatically, but if run manually, it fails:
$ make mrproper
$ make defconfig && make silentoldconfig
*** Default configuration is based on 'x86_64_defconfig'
#
# configuration written to .config
#
scripts/kconfig/conf -s arch/x86/Kconfig
*** Error during update of the kernel configuration.
...
Move the mkdir command to the silentoldconfig target to make it work.
Signed-off-by: Michal Marek <mmarek@suse.cz>
When the output directory is something other than the kernel source,
the streamline_config script gets confused. This patch passes in the
source directory to the script so that it can find the proper files.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Tested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
kconfig's keyword hash, lexer, and parser define various functions used
only locally. Declare these functions as static, and regenerate the
corresponding generated files.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
zconf.y includes zconf.hash.c from the initial code section.
zconf.hash.c references the token constants from zconf.y. However,
current bison defines the token constants after the initial code
section, making zconf.hash.c fail to compile. Move the include of
zconf.hash.c later in zconf.y, so bison puts it after the token
constants.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Warnings found via gcc -Wmissing-prototypes.
Signed-off-by: Trevor Keith <tsrk@tsrk.net>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
When typeahead find is enabled, using 'y', 'n' and 'm' to change the status
of the configuration items will also start up the search system, making you
jump around the configuration.
Disabling the enable_search property does not mean that search is not
possible, it only disables the typeahead; to execute a search in the
treeview, you can just call it up explicitly (i.e.: on most systems that
will be Ctrl-f).
Signed-off-by: Diego Elio 'Flameeyes' Pettenò <flameeyes@gmail.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Futhermore, gconfig interface lack the "search a symbol" function, do later.
Signed-off-by: Cheng Renquan <crquan@gmail.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
[sam: fix SEGV in gconfig]
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
The removed functions are moved into menu.c for sharing with
gconfig & xconfig & config.
Signed-off-by: Cheng Renquan <crquan@gmail.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
The three functions are moved from mconf.c, then they can be shared in
all menuconfig & gconfig & xconfig & config.
+void menu_get_ext_help(struct menu *menu, struct gstr *help)
+static void get_prompt_str(struct gstr *r, struct property *prop)
+void get_symbol_str(struct gstr *r, struct symbol *sym)
Signed-off-by: Cheng Renquan <crquan@gmail.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Sometimes when configuring need to disable some unused item, but the item is
selected by many other items, it's hard to find the real dependency which
selected it, This patch add every symbol's value accompanied to make it
possible to find the real dependency easily.
An example is CONFIG_RFKILL,
---------------------- RF switch subsystem support ----------------------
| CONFIG_RFKILL: |
| |
| Say Y here if you want to have control over RF switches |
| found on many WiFi and Bluetooth cards. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called rfkill. |
| |
| Symbol: RFKILL [=m] |
| Prompt: RF switch subsystem support |
| Defined at net/rfkill/Kconfig:4 |
| Depends on: NET [=y] |
| Location: |
| -> Networking support (NET [=y]) |
| Selected by: IWLCORE [=n] && NETDEVICES [=y] && !S390 [=S390] && PC |
| |
----------------------------------------------------------------( 99%)---
Signed-off-by: Cheng Renquan <crquan@gmail.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
There's a dependency missing.
$ make localyesconfig
HOSTCC scripts/basic/fixdep
HOSTCC scripts/basic/docproc
HOSTCC scripts/basic/hash
using config: '/boot/config-2.6.27.25-78.2.56.fc9.x86_64'
/bin/sh: line 8: scripts/kconfig/conf: No such file or directory
make[1]: *** [localyesconfig] Error 127
make: *** [localyesconfig] Error 2
Thus the script failed to run. But the sed command that converts the '=m'
to '=y' still ran. This gives us a distro config with all modules
converted to built in!
The missing dependency was for conf for localyesconfig. This
dependency was already set for localmodconfig.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If one were to run localmodconfig or localyesconfig without having
a .config already in the file, then the end of the process would give
a warning when it tries to move the old .config to .config.old.
This patch adds a test to check if .config exists and avoid the moves
if it does not.
[ Impact: remove warning after make localmodconfig ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
As Andi Kleen pointed out, most people would expect that the local .config
file to be based for a streamline config. This patch changes the order
of searching for a config file to consider the .config in the local
directory first.
Reported-by: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Many distros put their config in /boot/config-`uname -r`, add a check
for that right after /proc/config.gz
Reported-by: Alan Jenkins <sourcejedi.lkml@googlemail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Due to cut and paste error IKCONFIG was both set and cleared.
It was suppose to be IKCONFIG_PROC to be cleared.
Also cleaned up if nesting.
Reported-by: Alan Jenkins <sourcejedi.lkml@googlemail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Instead of using the .config in the local directory. This patch
changes streamline_config.pl to search various locations for a config.
Here's the list and order of search:
/proc/config.gz
/boot/vmlinuz-`uname -r`
vmlinux # local to the directory
/lib/modules/`uname -r`/kernel/kernel/configs.ko
kernel/configs.ko
kernel/configs.o
.config
Once it finds a file that contains a config (it checks if the binary
objects have configs first) it then uses it to create the .config
with minimum modules needed.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Ingo Molnar suggested that the streamline_config.pl should enable
CONFIG_IKCONFIG to keep the current config in the kernel.
Then we can use scripts/extract-ikconfig to find the current
modules.
This patch changes streamline_config.pl to check if CONFIG_IKCONFIG
is not set, and if it is not, it enables it to be a module.
[ Impact: make current config options easier to find ]
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The streamline_config.pl finds all the configs that are needed to
compile the currently loaded modules. After it creates the .config
file, it tests to make sure all the configs that are needed were
set.
It only looks at the configs that are modules, it does not look
at the builtin configs. This causes unnecessary warnings about modules
not being covered.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If a config does not have a prompt, it must be selected.
streamline_config.pl keeps track of all configs that select other configs.
If a config that does not have a prompt needs to be set to enable a
current module, it will include all configs that select it.
Note, streamline_config.pl does not enable modules that are not already
enabled. It only keeps enabled those that were enabled and might be
needed to compile the current modules.
The code to find the selects of a config is after the code that
adds the depends. But if a config needed selects but had no dependencies,
it would not be set. Because the code would stop before getting to
the select.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This adds the option localyesconfig to make. This is similar to
localmodconfig, but after it removes unnecessary modules it runs
sed -i s/=m/=y/
on the .config file. It then runs "make silentoldconfig" to fix any
wholes that were created by the conversion of modules to core.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Running the streamline_config.pl script manually can still be confusing
for some users. This patch adds the localmodconfig option. This will
automatically run streamline_config.pl on the current .config and
then run "make silentoldconfig" to fix any wholes that might have been
created.
$ make localmodconfig
This will remove any module configurations in .config that are not needed
to compile the modules that are loaded.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
streamline_config.pl is a very powerful tool. For those that install
a kernel to a new box using the config file from the distribution know that
it can take forever to compile the kernel.
Making a custom config file that will still boot your box, but bring
down the compile time of the kernel can be quit painful, and to ask
someone that reported a bug to do this can be a large burdon since that
person may not even know how to build a kernel.
This script will perform "lsmod" to find all the modules loaded on the
current running system. It will read all the Makefiles to map which
CONFIG enables a module. It will read the Kconfig files to find the
dependencies and selects that may be needed to support a CONFIG.
Finally, it reads the .config file and removes any module "=m" that is
not needed to enable the currently loaded modules. The output goes to
standard out.
Here's a way to run the script. From the Linux directory that holds
a distribution .config.
$ scripts/kconfig/streamline_config.pl arch/x86/Kconfig > config-sl
$ mv .config config-save
$ mv config-sl .config
$ make oldconfig
Now you have a .config that will still build all your modules, but also
take much less time to build the kernel.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This is needed on non ncurses based implementation to get a properly
initialized `stdscr' in main().
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Regardless of KCONFIG_AUTOCONFIG, the filename written as a Make target
into "include/config/auto.conf.cmd" was always the default one.
Of course this doesn't make it work for the Kernel kbuild system, since
there the filename is hardcoded at several places in the Makefiles.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Rather than hardcoding ".config" use conf_get_configname(), which also
respects the environment variable KCONFIG_CONFIG.
This fixes "make silentoldconfig" when KCONFIG_CONFIG is used and also
suggests the given filename for "Load" and "Save as" in qconf.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
QApplication::desktop() returns a pointer to QDesktopWidget, not to
QWidget.
Fixes the following compiler error after a quick conversion with 'qt3to4',
which occured with g++ 3.4.6 and 4.1.2, but not anymore with 4.3.2.
scripts/kconfig/qconf.cc: In constructor 'ConfigMainWindow::ConfigMainWindow()':
scripts/kconfig/qconf.cc:1289: error: cannot convert 'QDesktopWidget*' to 'QWidget*' in initialization
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
They are defined in the 'Qt' namespace.
Fixes the following compiler errors after a quick conversion with 'qt3to4',
which occured with g++ 3.4.6 and 4.1.2, but not anymore with 4.3.2.
scripts/kconfig/qconf.cc: In member function 'virtual void ConfigLineEdit::keyPressEvent(QKeyEvent*)':
scripts/kconfig/qconf.cc:311: error: 'Key_Escape' was not declared in this scope
scripts/kconfig/qconf.cc:313: error: 'Key_Return' was not declared in this scope
scripts/kconfig/qconf.cc:314: error: 'Key_Enter' was not declared in this scope
scripts/kconfig/qconf.cc: In member function 'virtual void ConfigList::keyPressEvent(QKeyEvent*)':
scripts/kconfig/qconf.cc:653: error: 'Key_Escape' was not declared in this scope
scripts/kconfig/qconf.cc:666: error: 'Key_Return' was not declared in this scope
scripts/kconfig/qconf.cc:667: error: 'Key_Enter' was not declared in this scope
scripts/kconfig/qconf.cc:681: error: 'Key_Space' was not declared in this scope
scripts/kconfig/qconf.cc:684: error: 'Key_N' was not declared in this scope
scripts/kconfig/qconf.cc:687: error: 'Key_M' was not declared in this scope
scripts/kconfig/qconf.cc:690: error: 'Key_Y' was not declared in this scope
scripts/kconfig/qconf.cc: In constructor 'ConfigMainWindow::ConfigMainWindow()':
scripts/kconfig/qconf.cc:1329: error: 'CTRL' was not declared in this scope
scripts/kconfig/qconf.cc:1329: error: 'Key_Q' was not declared in this scope
scripts/kconfig/qconf.cc:1331: error: 'Key_L' was not declared in this scope
scripts/kconfig/qconf.cc:1333: error: 'Key_S' was not declared in this scope
scripts/kconfig/qconf.cc:1340: error: 'Key_F' was not declared in this scope
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
They were used as QSplitter::Horizontal resp. QSplitter::Vertical, but
are defined in the 'Qt' namespace.
Fixes the following compiler errors after a quick conversion with 'qt3to4',
which occured with g++ 3.4.6 and 4.1.2, but not anymore with 4.3.2.
scripts/kconfig/qconf.cc: In constructor 'ConfigSearchWindow::ConfigSearchWindow(ConfigMainWindow*, const char*)':
scripts/kconfig/qconf.cc:1213: error: 'Vertical' is not a member of 'QSplitter'
scripts/kconfig/qconf.cc: In constructor 'ConfigMainWindow::ConfigMainWindow()':
scripts/kconfig/qconf.cc:1304: error: 'Horizontal' is not a member of 'QSplitter'
scripts/kconfig/qconf.cc:1311: error: 'Vertical' is not a member of 'QSplitter'
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
These compiler warnings occure when adding -Wall to HOSTCXXFLAGS in
/Makefile
scripts/kconfig/qconf.h: In constructor ‘ConfigInfoView::ConfigInfoView(QWidget*, const char*)’:
scripts/kconfig/qconf.h:274: warning: ‘ConfigInfoView::menu’ will be initialized after
scripts/kconfig/qconf.h:273: warning: ‘symbol* ConfigInfoView::sym’
scripts/kconfig/qconf.cc:922: warning: when initialized here
scripts/kconfig/qconf.cc: In member function ‘void ConfigMainWindow::setMenuLink(menu*)’:
scripts/kconfig/qconf.cc:1498: warning: enumeration value ‘menuMode’ not handled in switch
scripts/kconfig/qconf.cc:1498: warning: enumeration value ‘listMode’ not handled in switch
scripts/kconfig/qconf.cc: In member function ‘void ConfigMainWindow::saveSettings()’:
scripts/kconfig/qconf.cc:1664: warning: enumeration value ‘menuMode’ not handled in switch
scripts/kconfig/qconf.cc:1664: warning: enumeration value ‘listMode’ not handled in switch
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Implement support for comment entries within choice groups. Comment entries
are displayed visually distinct from normal configs, and selecting them is
a no-op.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Massimo Maiurana reported (slightly edited):
=====
In latest 2.6.29 "make update-po-config" fails at msguniq invocation
with an "invalid control sequence" error.
The offending string is the following, and it's located in
drivers/staging/panel/Kconfig:72:
"'\e[L' which are specific to the LCD, and a few ANSI codes. The"
looks to me like gettext expects strings in printf format, so in
this case it thinks "\e" is a control sequence but doesn't recognise
it as a valid one.
A valid solution would be to tell kxgettext to automatically
escape this kind of strings in the */config.pot he produces, so that
msguniq would not complain.
=====
This patch implements the suggested escaping.
Reported-by: Massimo Maiurana <maiurana@gmail.com>
Tested-by: Massimo Maiurana <maiurana@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
'make randconfig' uses glibc's rand function, and the seed of
that PRNG is set via:
srand(time(NULL));
But 'time()' only increases once every second - freezing the
randconfig result within a single second.
My Nehalem testbox does randconfig much faster than 1 second
and i have a few scripts that do 'randconfig until condition X'
loops.
Those scripts currently waste a lot of CPU time due to randconfig
changing its seed only once per second currently.
Change the seed to be micrseconds based. (I checked the statistical
spread of the seed - the now.tv_sec*now.tv_usec multiplication
there further improves it.)
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Roman Zippel <zippel@linux-m68k.org>
[sam: fix for systems where usec is zero - noticed by Geert Uytterhoeven]
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Ingo Molnar reported that 'make randconfig' was not covering
choice blocks properly, resulting in certain config options
being left out of randconfig testing altogether.
With the following patch we:
- properly randomize choice value for normal choice blocks
- properly randomize for multi choice blocks
- added several comments to explain what is going on
The root cause of the bug was that SYMBOL_VALID was set on the
symbol representing the choice block so clearing this did
the trick initially.
But testign revealed a few more issues that is now fixed.
Reported-by: Ingo Molnar <mingo@elte.hu>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
We now say where we detect the second source of a file,
and where we detect a recursively source of the same file.
This makes it easier to fix such errors.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
If you use KCONFIG_ALLCONFIG (even with empty file) you get broken
allmodconfig/allyesconfig; CONFIG_MODULES gets turned off, with obvious
massive fallout.
Breakage had been introduced when conf_set_all_new_symbols() got used
for allmodconfig et.al.
What happens is that sym_calc_value(modules_sym) done in
conf_read_simple() sets SYMBOL_VALID on both modules_sym and MODULES.
When we get to conf_set_all_new_symbols(), we set sym->def[S_DEF_USER]
on everything, but it has no effect on sym->curr for the symbols that
already have SYMBOL_VALID - these are stuck.
Solution: use sym_clear_all_valid() in there. Note that it makes
reevaluation of modules_sym redundant - sym_clear_all_valid() will do
that itself.
[ Fixes http://bugzilla.kernel.org/show_bug.cgi?id=11512, says Alexey ]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Teach scripts/kconfig/Makefile and top-level Makefile that arch/*/Makefile
is allowed to say Kconfig := <whatever I want instead of arch/blah/Kconfig>.
Rewrite arch/um/Kconfig and arch/um/Kconfig.<subarch> so that the latter
would be top-level one (and include the pieces of the former).
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Commit f072181e64 ("kconfig: drop the
""trying to assign nonexistent symbol" warning") simply dropped the
warnings, but it does a little more than that, it also marks the current
.config as needed saving, so add this back.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Recent changes to oldconfig have mixed up the silentoldconfig handling,
so this fixes that by clearly separating that special mode, e.g.
KCONFIG_NOSILENTUPDATE is only relevant here, the .config is written as
needed.
This will also properly close Bug 11230.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
They really stand out now that make *config is less chatty - and
they are generally ignored - so drop them.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Adrian Bunk <bunk@kernel.org>
Always write out .config also in the case where config
did not change.
This fixes: http://bugzilla.kernel.org/show_bug.cgi?id=11230
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Cc: Adrian Bunk <bunk@kernel.org>
gcc 4.3 correctly determines that input() is unused and gives the
following warning:
<-- snip -->
...
HOSTCC scripts/kconfig/zconf.tab.o
scripts/kconfig/lex.zconf.c:1628: warning: ‘input’ defined but not used
...
<-- snip -->
Fix it by adding %option noinput to scripts/kconfig/zconf.l and
regeneration of scripts/kconfig/lex.zconf.c_shipped.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
make defconfig generated a lot of output
then noone actually read.
Use conf_set_all_new_symbols() to generate the default
configuration and avoid the chatty output.
A typical run now looks like this:
$ make defconfig
*** Default configuration is based on 'i386_defconfig'
arch/x86/configs/i386_defconfig:13:warning: trying to assign nonexistent symbol SEMAPHORE_SLEEPERS
arch/x86/configs/i386_defconfig:176:warning: trying to assign nonexistent symbol PREEMPT_BKL
...
arch/x86/configs/i386_defconfig:1386:warning: trying to assign nonexistent symbol INSTRUMENTATION
$
As an added benefit we now clearly see the warnings generated
in the start of the process.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Previously when running "make oldconfig" we saw all the propmt lines
from kconfig and noone actully read this.
With this patch the user will only see output if there is new symbols.
This will be seen as "make oldconfig" runs which does not generate any output.
A typical run now looks like this:
$ make oldconfig
scripts/kconfig/conf -o arch/x86/Kconfig
$
If a new symbol is found then we restart the config process like this:
$ make oldconfig
scripts/kconfig/conf -o arch/x86/Kconfig
*
* Restart config...
*
*
* General setup
*
Prompt for development and/or incomplete code/drivers (EXPERIMENTAL) [Y/n/?] y
Local version - append to kernel release (LOCALVERSION) []
...
The bahaviour is similar to what we know when running the implicit
oldconfig target "make silentoldconfig".
"make silentoldconfig" are run as part of the kernel build process
if the configuration has changed.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Drop the chatty mode when we generate the all*config, randconfig
configurations.
Ths speeds up the process considerably and noone looked
at the output anyway.
This patch uses the conf_set_all_new_symbols() function
just added to kconfig.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Add conf_set_all_new_symbols() which set all symbols (which don't have a
value yet) to a specifed value.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
1) The field 'len' of the 'gstr' structure seems to track the size of the memory
already allocated for the "growable string". So the value of this field should be
the same as the 'malloc()' just above, shouldn't it ?
Signed-off-by: Christophe Jaillet <christophe.jaillet@wanadoo.fr>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
OS-X shell did not like 'echo -e' so implement
suggestion from Al Viro to use a more portable construct.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Acked-By: Timur Tabi <timur@freescale.com>
As choice dependency are now fully checked, it's quite easy to add support
for named choices. This lifts the restriction that a choice value can only
appear once, although it still has to be within the same group,
but multiple choices can be joined by giving them a name.
While at it I cleaned up a little the choice type logic to simplify it a
bit.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Properly check the dependency of choices as a group.
Also fix that sym_check_deps() correctly terminates the dependency loop
error check (otherwise it would continue printing the dependency chain).
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Fix reversal of dlg.border.atr and dlg.dialog.atr for draw_box()
Makes the inputbox look like expected
Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Massimo Maiurana reported:
In the latest kernel "make update-po-config" fails because it tries
to open arch/Kconfig/Kconfig, since the ls command doesn't
distinguish between files and directories.
Cc: Massimo Maiurana <maiurana@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
> The attached .config (with current -git) results in a compile
> error since it contains:
>
> CONFIG_X86=y
> # CONFIG_EMBEDDED is not set
> CONFIG_SERIO=m
> CONFIG_SERIO_I8042=y
>
> Looking at drivers/input/serio/Kconfig I simply don't get how this
> can happen.
You've hit the rather subtle rules of select vs default. What happened is
that SERIO is selected to m, but SERIO_I8042 isn't selected so the default
of y is used instead.
We already had the problem in the past that select and default don't work
well together, so this patch cleans this up and makes the rule hopefully
more straightforward. Basically now the value is calculated like this:
(value && dependency) || select
where the value is the user choice (if available and the symbol is
visible) or default.
In this case it means SERIO and SERIO_I8042 are both set to y due to their
default and if SERIO didn't had the default, then the SERIO_I8042 value
would be limited to m due to the dependency.
I tested this patch with more 10000 random configs and above case is the
only the difference that showed up, so I hope there is nothing that
depended on the old more complex and subtle rules.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Tested-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
We have had warnings for a long time about select of unknow symbol
but the warnings does not really makes sense since we may
select a symbol that is relevant and defined in one
arch but not in another arch.
And as long as we do not use a common set of Kconfig files
for all archs lets just ignore this case.
Previously we have used this to find bad uses of
select but we need a more relaible method to do so.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Michal Zachar <mgzachar@mail.t-com.sk> reported that
menuconfig did not save the new config when loading
an alternate config unless he altered it manually.
Mark config as changed upon load of alternate config fixed this.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Roman Zippel <zippel@linux-m68k.org>
Change kconfig behavior so that mixing bool and tristate config
settings in a choice is possible and has the desired effect of offering
just the tristate options individually if the choice gets set to M, and
a normal boolean selection if the choice gets set to Y.
Also fix scripts/kconfig/conf's handling of children of choice values -
there may be more than one immediate child, and all of them need to be
processed.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: "Roman Zippel" <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Kconfig had a synonym "enable" for "select" that was neither documented
nor used.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Use the environment option to provide the ARCH symbol
and the KERNELVERSION symbol.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Add the possibility to import a value from the environment into kconfig
via the option syntax. Beside flexibility this has the advantage
providing proper dependencies.
Documented the options syntax.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Rename E_CHOICE to E_LIST to explicitly add support for expression
lists. Add a helper macro expr_list_for_each_sym to more easily iterate
over the list.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Gettext support for symbol names are unnecessary.
Signed-off-by: Egry Gabor <gaboregry1@t-online.hu>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Gettext support for conf.c
[Include locale.h by Kyle].
Signed-off-by: Egry Gabor <gaboregry1@t-online.hu>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Gettext support for lxdialog.
Signed-off-by: Egry Gabor <gaboregry1@t-online.hu>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Full gettext support for menuconfig.
Signed-off-by: Egry Gabor <gaboregry1@t-online.hu>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Full gettext support for xconfig.
Signed-off-by: Egry Gabor <gaboregry1@t-online.hu>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
This patch removes the indirect I18N support for config file.
Signed-off-by: Egry Gabor <gaboregry1@t-online.hu>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Gettext support for menu and toolbar.
Signed-off-by: Egry Gabor <gaboregry1@t-online.hu>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
This patch removes the unnecessary whitespaces from
end of help lines of Kconfig files.
Signed-off-by: Egry Gabor <gaboregry1@t-online.hu>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
rand and srand functions conform also to C89 in addition to POSIX.1-2001,
which makes them a bit more portable (work also on MinGW host). Linux man
page also says:
"The versions of rand() and srand() in the Linux C Library use the same
random number generator as random() and srandom()".
* Use C89 conformant functions rand() and srand()
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Sort includes and remove leading whitespace.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org
The *_PRINTED flags were never used - so delete them.
Do we need them later then we can re-add them.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
We had macros named the same as a set of enumeration values.
It is legal code but very confusing to read - so rename
the macros from E_* to EXPR_*
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Allow config variables in .config to override earlier ones in the same
file. In other words,
# CONFIG_SECURITY is not defined
CONFIG_SECURITY=y
will activate it. This makes it a bit easier to do
cat original-config myconfig myconfig2 ... >.config;
and run *config as expected.
Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Kconfig is powerfull tool. So powerfull that more and more software
projects are using it for configuration. So instead of fixing some of
them one by one, lets fix it in kernel and wait for sync.
This work was originaly done for PTXdist - GPL licensed build system for
userlands and cross-compilers, but it will not hurt kernel kconfig
either. PTXdist menuconfig now works on Windows linked with PDCurses and
compiled using MinGW - there is no termios and signals.
* Do not include <sys/wait.h> and <signal.h> (comes from times when
lxdialog was separate process)
* Do not mess with termios directly and let curses tell screen size.
Comment to commit c8dc68ad0f says
check for screen size could be removed later, but because it didn't
happen for more than year I left it here as well.
* Save cursor position added by Sam
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Switch from doing our own parsing of command line arguments to
using getopt(3) to do it. Aside from simplifying things, this allows us to
specify multiple arguments; the old code could only accept two arguments
(input_mode and kconfig name).
Note some subtle changes:
- The argument '-?' is no longer supported.
- '-h' is not treated as an error, so output goes to stdout, and we
exit with '0'.
- There is no compatibility checking amongst arguments; the last option
will simply override earlier options. For example, 'conf -n -y foo'
is perfectly valid now (input_mode will be set_yes). Previously, that
would have been an error ("can't find file -y").
Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
With this patch when ncurses-devel (or whatever it is named)
is missing trying to run menuconfig will result in this:
$ make menuconfig
HOSTCC scripts/kconfig/conf.o
HOSTCC scripts/kconfig/kxgettext.o
*** Unable to find the ncurses libraries or the
*** required header files.
*** 'make menuconfig' requires the ncurses libraries.
***
*** Install ncurses (ncurses-devel) and try again.
***
make[1]: *** [scripts/kconfig/dochecklxdialog] Error 1
make: *** [menuconfig] Error 2
Much better than before where we just listed some build errors.
The other *config targets will work indepenednt on ncurses
being present or not.
Includes improvements suggested by: Frans Pop <elendil@planet.nl>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Frans Pop <elendil@planet.nl>
Currently when using KCONFIG_ALLCONFIG with randconfig the choice options
are clobbered. As recommended by Roman, this adds an is_new test to see
whether to select a new option or obey the existing one.
This is a resend of the earlier patch a couple of weeks ago, since there
was no reply. Original thread is at http://lkml.org/lkml/2007/11/28/94
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Simplify "make ARCH=x86" and fix kconfig so we again can set 64BIT in
all.config.
For a fix the diffstat is nice:
6 files changed, 3 insertions(+), 36 deletions(-)
The patch reverts these commits:
- 0f855aa64b ("kconfig: add helper to set
config symbol from environment variable")
- 2a113281f5 ("kconfig: use $K64BIT to
set 64BIT with all*config targets")
Roman Zippel pointed out that kconfig supported string compares so
the additional complexity introduced by the above two patches were
not needed.
With this patch we have following behaviour:
# make {allno,allyes,allmod,rand}config [ARCH=...]
option \ host arch | 32bit | 64bit
=====================================================
./. | 32bit | 64bit
ARCH=x86 | 32bit | 32bit
ARCH=i386 | 32bit | 32bit
ARCH=x86_64 | 64bit | 64bit
The general rule are that ARCH= and native architecture takes
precedence over the configuration.
So make ARCH=i386 [whatever] will always build a 32-bit kernel
no matter what the configuration says. The configuration will
be updated to 32-bit if it was configured to 64-bit and the
other way around.
This behaviour is consistent with previous behaviour so no
suprises here.
make ARCH=x86 will per default result in a 32-bit kernel but as
the only ARCH= value x86 allow the user to select between 32-bit
and 64-bit using menuconfig.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Andreas Herrmann <aherrman@arcor.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
After unification of the Kconfig files and
introducing K64BIT support in kconfig
it required only trivial changes to enable
"make ARCH=x86".
With this patch you can build for x86_64 in several ways:
1) make ARCH=x86_64
2) make ARCH=x86 K64BIT=y
3) make ARCH=x86 menuconfig
=> select 64-bit
Likewise for i386 with the addition that
i386 is default is you say ARCH=x86.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
The variable K64BIT can now be used to select the
value of CONFIG_64BIT.
This is for example useful for powerpc to generate
allmodconfig for both bit sizes - like this:
make ARCH=powerpc K64BIT=y
make ARCH=powerpc K64BIT=n
To use this the Kconfig file must use "64BIT" as the
config value to select between 32 and 64 bit.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Add conf_set_env_sym() that can set an already defined symbol
based on the value of an environment variable.
Unknown symbols are silently ignored.
A warning is printed if the value of the environment variable
is unexpected.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
With some small changes to kconfig makefile we can now
locate the defconfig files for i386 and x86_64 in
the configs/ subdirectory under x86.
make ARCH=i386 defconfig and make defconfig
works as expected also after this change.
But arch maintainers shall now update a defconfig file in
the configs/ directory.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Put kernel version info on title bar in xconfig (qconf) instead of
defaulting to "qconf".
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
This reverts commit a5bf3d891a.
David Brownell notes that this causes a regression visible in the
drivers/usb/gadget Kconfig file:
"That Kconfig hasn't changed (other than adding new drivers), and it's
worked that way for several years now ... so the issue seems to be
changes in menuconfig/kconfig/etc semantics.
The issue is that when USB_GADGET=m, it's no longer possible to
configure peripheral controller drivers as modules ... the
controller drivers can now only be configured for static linkage.
It should be making a choice of one of the controller drivers which
could work on the target system, and allow that driver to be linked
either as a module (ok iff USB_GADGET=m) or statically."
Reverting this commit resolves the problem, and also fixes a second
problem that David noticed: various dependent options couldn't be enabled.
Tested-and-reported-by: David Brownell <david-b@pacbell.net>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Jan Beulich <jbeulich@novell.com>,
Cc: Andrew Morton <akpm@linux-foundation.org>,
Cc: Sam Ravnborg <sam@ravnborg.org>,
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
menuconfig currently represents options implied by another option ('select'
directive in Kconfig) by prefixing them with '---'. Unfortunately the same
notation is used for comments. If the implied option is module capable,
user can still switch between Y and M, all without any feedback until she
visits option's help. (try saying M to MAC80211 and then toggling
CFG80211)
This patch changes notation of selected-by-another items by introducing 2
new representations for implied options: {*} or {M} for options selected by
another modularized one, thus builtin or module capable, -*- or -M- for
options that cannot be at the moment changed by user.
The idea is to represent actual capability of the option by braces (dashes)
around and to always report actual state by * or M inside.
Signed-off-by: Matej Laitl <strohel@gmail.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Change kconfig behavior so that mixing bool and tristate config settings in
a choice is possible and has the desired effect of offering just the
tristate options individually if the choice gets set to M, and a normal
boolean selection if the choice gets set to Y.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Update _shipped files so regular user does not
need to have bison/flex/gperf installed.
Code changes were contained in previous commit.
Used following program versions (on fedora):
bison (GNU Bison) 2.3
flex 2.5.33
GNU gperf 3.0.2
Cc: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Remove the following redundant and never or rarely used kconfig syntax:
- "def_boolean" (same as "def_bool")
- "requires" (same as "depends on")
- "depends" (same as "depends on")
This patch contains the code changes and Kconfig updates.
The shipped files are in next patch to let actual codechange stand out.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Cc: Bryan Wu <bryan.wu@analog.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: "John W. Linville" <linville@tuxdriver.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
With specific configurations requesting help for certain
menu lines caused menuconfig to crash.
This was tracked down to a null pointer bug.
Thanks to "Miles Lane" <miles.lane@gmail.com> for inital reporting
and to Gabriel C <nix.or.die@googlemail.com> for the backtrace
that helped me locating the bug.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Matěj Laitl <strohel@gmail.com> noticed that there was no way
to distingush between comments and un-selectable menu lines.
This patch marks comments with *** comment ***
Cc: Matěj Laitl <strohel@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
cygwin provides the header file but the lib file needs
to be added manually. A generic fix is to check if
we can compile and link a program that uses gettext()
and if it fails fall back to NO_NLS.
International users of cygwin may have to specify
HOST_LOADLIBES := "-lintl" on the make command line.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Avoid setting the value if the symbol doesn't need to be changed or can't
be changed. Later choices may change the dependencies and thus the
possible input range.
make oldconfig from a 2.6.22 .config with CONFIG_HOTPLUG_CPU not set
was in some configurations setting CONFIG_HOTPLUG_CPU=y without asking,
even when there was no actual requirement for CONFIG_HOTPLUG_CPU.
This was triggered by SUSPEND_SMP that does a select HOTPLUG_CPU.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Tested-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Roman Zippel wrote:
> A simple example would be
> help texts, right now they are per symbol, but they should really be per
> menu, so archs can provide different help texts for something.
This patch does this and at the same time introduce a few API
funtions used to access the help text.
The relevant api functions are introduced in the various frontends.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Normally generated values (Kconfig entries without a prompt) are cleared as
they are regenerated anyway and so they appear as new should they become
visible and defaults work as expected (once a value is set defaults aren't
used anymore).
The detection whether a value is generated or not is only based on its
visibility status, which can quickly change for a lot of symbols by just
removing a single line from .config or adding a dependency to Kconfig as you
noticed.
The patch now suppresses this logic when .config and Kconfig aren't in sync
and .config needs to be updated, so that you can remove now a random value
from .config and oldconfig won't reask for many other values.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Modify the ncurses configuration tool ('make menuconfig') in a way that the
user can enter the search string (/) both with or without the leading
'CONFIG_'.
This simplifies using copy & paste from .config files because you can
select the whole word.
Signed-off-by: Bernhard Walle <bwalle@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Massimo Maiurana <maiurana@gmail.com> reported that
update-po-config was broken:
1) spelling errors in Makefile so arch/um failed
2) UTF-8 was not supported
The following patch address the above problems.
kxgettext now append the output to the .pot file
generated by xgettext - so we have a header.
In all places UFT-8 is specifed so we now flawlessly
support UTF-8.
The Kconfig files had an empty string in a few cases -
these are now supressed in kxgettext.
With this the translators can now pick up where they left
and get it all translated.
There are ~11000 strings to be translated...
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Massimo Maiurana <maiurana@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
The "==" operator is not in POSIX, so use -eq instead.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
The check-lxdialog.sh script searches for "libFOO.so" which fails on OS X, due
to their special naming of libraries like "libfoo.dylib". This patch turns
the curses lib search into extensible loops and adds dylib as a valid
extension.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
I have found small bug in mconf, when you run it without any argument it
will sigsegv.
Without patch:
$ scripts/kconfig/mconf
Segmentation fault
With patch:
$ scripts/kconfig/mconf
can't find file (null)
Signed-off-by: Marcin Garski <mgarski@post.pl>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Sample:
config FOO
bool "This is foo"
depends on BAR
config BAR
bool "This is bar"
depends on FOO
This will result in following error message:
error: found recursive dependency: FOO -> BAR -> FOO
And will then exit with exit code equal 1 so make will stop.
Inspired by patch from: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Adrian Bunk <bunk@stusta.de>
Cc: Roman Zippel <zippel@linux-m68k.org>
Correct a minor spelling mistake in a Kconfig warning message.
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Somewhat in reponse to kernel bugzilla #8197, be more explicit about
why 'make all' fails when there is no .config file.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
We do not support qt4 (yet) so the simple fix was to warn
that qt3 are missing.
The better fix would have been to implment qt4 support
but that has failed so far.
This solves http://bugzilla.kernel.org/show_bug.cgi?id=8277
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Nigel Cunningham <nigel@nigel.suspend2.net> noticed
that 'make mrproper' did not remove mconf.
Fixed so we now remove all relevant binaries.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Nigel Cunningham <nigel@nigel.suspend2.net>
Export and use the function conf_get_configname()
to retreive the default configuration filename.
Suggested by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
When loading an alternate configuration use that file as
current configuration filename.
Make the filename visible in the dialog.
Default continue to be .config.
Inspired by patch from: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
When changing current menu in search dialog update also main view
Signed-off-by: Marco Costalba <mcostalba@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
The index() function is obsolete, use strchr() instead.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
This patch fixes showing empty config list items if "Option/Show All
Options" is turned on. For example empty items appears on list of 'Block
Layer' menu.
Signed-off-by: Cyrill V. Gorcunov <gorcunov@gmail.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Oleg Verych <olecom@flower.upol.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Do "Back" button behaviour normalization so it is enabled starting from
second-level menu only.
Signed-off-by: Cyrill V. Gorcunov <gorcunov@gmail.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
qconf does not clear help text in search window if previous search has been
failed.
Signed-off-by: Cyrill V. Gorcunov <gorcunov@mail.ru>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Relocate the qconf search command to the "Edit"->"Find" menu option.
This is per the discussion on my qconf search dialog patch.
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In xconfig's display integer and string values are also shown as part of
the config item's descriptive text.
This patch updates the descriptive text, when the corresponding value has
been changed. Fix for http://bugzilla.kernel.org/show_bug.cgi?id=7744
Take2 uses updateList() so config values dependending on the changed value
see the change.
Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Back out the recent fix for this bug, fix it by correctly initialising
ConfigInfoView.sym.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Cc: "Cyrill V. Gorcunov" <gorcunov@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
qconf may cause SIGSEGV by trying to show debug information on empty menu
items
Signed-off-by: Cyrill V. Gorcunov <gorcunov@gmail.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
