Move vpid_sync_vcpu_addr() below vpid_sync_context() so that it can be
refactored in a future patch to call vpid_sync_context() directly when
the "individual address" INVVPID variant isn't supported.
No functional change intended.
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-11-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use vpid_sync_context() directly for flows that run if and only if
enable_vpid=1, or more specifically, nested VMX flows that are gated by
vmx->nested.msrs.secondary_ctls_high.SECONDARY_EXEC_ENABLE_VPID being
set, which is allowed if and only if enable_vpid=1. Because these flows
call __vmx_flush_tlb() with @invalidate_gpa=false, the if-statement that
decides between INVEPT and INVVPID will always go down the INVVPID path,
i.e. call vpid_sync_context() because
"enable_ept && (invalidate_gpa || !enable_vpid)" always evaluates false.
This helps pave the way toward removing @invalidate_gpa and @vpid from
__vmx_flush_tlb() and its callers.
Opportunstically drop unnecessary brackets in handle_invvpid() around an
affected __vmx_flush_tlb()->vpid_sync_context() conversion.
No functional change intended.
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-10-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Skip the global INVVPID in the unlikely scenario that vpid==0 and the
SINGLE_CONTEXT variant of INVVPID is unsupported. If vpid==0, there's
no need to INVVPID as it's impossible to do VM-Enter with VPID enabled
and vmcs.VPID==0, i.e. there can't be any TLB entries for the vCPU with
vpid==0. The fact that the SINGLE_CONTEXT variant isn't supported is
irrelevant.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-9-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When injecting a page fault or EPT violation/misconfiguration, KVM is
not syncing any shadow PTEs associated with the faulting address,
including those in previous MMUs that are associated with L1's current
EPTP (in a nested EPT scenario), nor is it flushing any hardware TLB
entries. All this is done by kvm_mmu_invalidate_gva.
Page faults that are either !PRESENT or RSVD are exempt from the flushing,
as the CPU is not allowed to cache such translations.
Signed-off-by: Junaid Shahid <junaids@google.com>
Co-developed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-8-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To reconstruct the kvm_mmu to be used for page fault injection, we
can simply use fault->nested_page_fault. This matches how
fault->nested_page_fault is assigned in the first place by
FNAME(walk_addr_generic).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Wrap the combination of mmu->invlpg and kvm_x86_ops->tlb_flush_gva
into a new function. This function also lets us specify the host PGD to
invalidate and also the MMU, both of which will be useful in fixing and
simplifying kvm_inject_emulated_page_fault.
A nested guest's MMU however has g_context->invlpg == NULL. Instead of
setting it to nonpaging_invlpg, make kvm_mmu_invalidate_gva the only
entry point to mmu->invlpg and make a NULL invlpg pointer equivalent
to nonpaging_invlpg, saving a retpoline.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Export the page fault propagation helper so that VMX can use it to
correctly emulate TLB invalidation on page faults in an upcoming patch.
In the (hopefully) not-too-distant future, SGX virtualization will also
want access to the helper for injecting page faults to the correct level
(L1 vs. L2) when emulating ENCLS instructions.
Rename the function to kvm_inject_emulated_page_fault() to clarify that
it is (a) injecting a fault and (b) only for page faults. WARN if it's
invoked with an exception other than PF_VECTOR.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-6-sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Free all roots when emulating INVVPID for L1 and EPT is disabled, as
outstanding changes to the page tables managed by L1 need to be
recognized. Because L1 and L2 share an MMU when EPT is disabled, and
because VPID is not tracked by the MMU role, all roots in the current
MMU (root_mmu) need to be freed, otherwise a future nested VM-Enter or
VM-Exit could do a fast CR3 switch (without a flush/sync) and consume
stale SPTEs.
Fixes: 5c614b3583 ("KVM: nVMX: nested VPID emulation")
Signed-off-by: Junaid Shahid <junaids@google.com>
[sean: ported to upstream KVM, reworded the comment and changelog]
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-5-sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Free all L2 (guest_mmu) roots when emulating INVEPT for L1. Outstanding
changes to the EPT tables managed by L1 need to be recognized, and
relying on KVM to always flush L2's EPTP context on nested VM-Enter is
dangerous.
Similar to handle_invpcid(), rely on kvm_mmu_free_roots() to do a remote
TLB flush if necessary, e.g. if L1 has never entered L2 then there is
nothing to be done.
Nuking all L2 roots is overkill for the single-context variant, but it's
the safe and easy bet. A more precise zap mechanism will be added in
the future. Add a TODO to call out that KVM only needs to invalidate
affected contexts.
Fixes: 14c07ad89f ("x86/kvm/mmu: introduce guest_mmu")
Reported-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-4-sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signal VM-Fail for the single-context variant of INVEPT if the specified
EPTP is invalid. Per the INEVPT pseudocode in Intel's SDM, it's subject
to the standard EPT checks:
If VM entry with the "enable EPT" VM execution control set to 1 would
fail due to the EPTP value then VMfail(Invalid operand to INVEPT/INVVPID);
Fixes: bfd0a56b90 ("nEPT: Nested INVEPT")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-3-sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Flush all EPTP/VPID contexts if a TLB flush _may_ have been triggered by
a remote or deferred TLB flush, i.e. by KVM_REQ_TLB_FLUSH. Remote TLB
flushes require all contexts to be invalidated, not just the active
contexts, e.g. all mappings in all contexts for a given HVA need to be
invalidated on a mmu_notifier invalidation. Similarly, the instigator
of the deferred TLB flush may be expecting all contexts to be flushed,
e.g. vmx_vcpu_load_vmcs().
Without nested VMX, flushing only the current EPTP/VPID context isn't
problematic because KVM uses a constant VPID for each vCPU, and
mmu_alloc_direct_roots() all but guarantees KVM will use a single EPTP
for L1. In the rare case where a different EPTP is created or reused,
KVM (currently) unconditionally flushes the new EPTP context prior to
entering the guest.
With nested VMX, KVM conditionally uses a different VPID for L2, and
unconditionally uses a different EPTP for L2. Because KVM doesn't
_intentionally_ guarantee L2's EPTP/VPID context is flushed on nested
VM-Enter, it'd be possible for a malicious L1 to attack the host and/or
different VMs by exploiting the lack of flushing for L2.
1) Launch nested guest from malicious L1.
2) Nested VM-Enter to L2.
3) Access target GPA 'g'. CPU inserts TLB entry tagged with L2's ASID
mapping 'g' to host PFN 'x'.
2) Nested VM-Exit to L1.
3) L1 triggers kernel same-page merging (ksm) by duplicating/zeroing
the page for PFN 'x'.
4) Host kernel merges PFN 'x' with PFN 'y', i.e. unmaps PFN 'x' and
remaps the page to PFN 'y'. mmu_notifier sends invalidate command,
KVM flushes TLB only for L1's ASID.
4) Host kernel reallocates PFN 'x' to some other task/guest.
5) Nested VM-Enter to L2. KVM does not invalidate L2's EPTP or VPID.
6) L2 accesses GPA 'g' and gains read/write access to PFN 'x' via its
stale TLB entry.
However, current KVM unconditionally flushes L1's EPTP/VPID context on
nested VM-Exit. But, that behavior is mostly unintentional, KVM doesn't
go out of its way to flush EPTP/VPID on nested VM-Enter/VM-Exit, rather
a TLB flush is guaranteed to occur prior to re-entering L1 due to
__kvm_mmu_new_cr3() always being called with skip_tlb_flush=false. On
nested VM-Enter, this happens via kvm_init_shadow_ept_mmu() (nested EPT
enabled) or in nested_vmx_load_cr3() (nested EPT disabled). On nested
VM-Exit it occurs via nested_vmx_load_cr3().
This also fixes a bug where a deferred TLB flush in the context of L2,
with EPT disabled, would flush L1's VPID instead of L2's VPID, as
vmx_flush_tlb() flushes L1's VPID regardless of is_guest_mode().
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Ben Gardon <bgardon@google.com>
Cc: Jim Mattson <jmattson@google.com>
Cc: Junaid Shahid <junaids@google.com>
Cc: Liran Alon <liran.alon@oracle.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: John Haxby <john.haxby@oracle.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Fixes: efebf0aaec ("KVM: nVMX: Do not flush TLB on L1<->L2 transitions if L1 uses VPID and EPT")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320212833.3507-2-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Return the host's L2 cache and TLB information for CPUID.0x80000006
instead of zeroing out the entry as part of KVM_GET_SUPPORTED_CPUID.
This allows a userspace VMM to feed KVM_GET_SUPPORTED_CPUID's output
directly into KVM_SET_CPUID2 (without breaking the guest).
Signed-off-by: Eric Northup (Google) <digitaleric@gmail.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Jon Cargille <jcargill@google.com>
Message-Id: <20200415012320.236065-1-jcargill@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_vcpu_ioctl_get_lapic (implements KVM_GET_LAPIC ioctl) does a bulk copy
of the LAPIC registers but must take into account that the one-shot and
periodic timer current count register is computed upon reads and is not
present in register state. When restoring LAPIC state (e.g. after
migration), restart timers from their their current count values at time of
save.
Note: When a one-shot timer expires, the code in arch/x86/kvm/lapic.c does
not zero the value of the LAPIC initial count register (emulating HW
behavior). If no other timer is run and pending prior to a subsequent
KVM_GET_LAPIC call, the returned register set will include the expired
one-shot initial count. On a subsequent KVM_SET_LAPIC call the code will
see a non-zero initial count and start a new one-shot timer using the
expired timer's count. This is a prior existing bug and will be addressed
in a separate patch. Thanks to jmattson@google.com for this find.
Signed-off-by: Peter Shier <pshier@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <20181010225653.238911-1-pshier@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The function returns no value.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Fixes: 199cd1d7b5 ("KVM: SVM: Split svm_vcpu_run inline assembly to separate file")
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Message-Id: <20200409114926.1407442-1-ubizjak@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
__svm_vcpu_run is a leaf function and does not need
a frame pointer. %rbp is also destroyed a few instructions
later when guest registers are loaded.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Message-Id: <20200409120440.1427215-1-ubizjak@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix:
arch/x86/kvm/svm/sev.c: In function ‘sev_pin_memory’:
arch/x86/kvm/svm/sev.c:360:3: error: implicit declaration of function ‘release_pages’;\
did you mean ‘reclaim_pages’? [-Werror=implicit-function-declaration]
360 | release_pages(pages, npinned);
| ^~~~~~~~~~~~~
| reclaim_pages
because svm.c includes pagemap.h but the carved out sev.c needs it too.
Triggered by a randconfig build.
Fixes: eaf78265a4 ("KVM: SVM: Move SEV code to separate file")
Signed-off-by: Borislav Petkov <bp@suse.de>
Message-Id: <20200411160927.27954-1-bp@alien8.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
svm_vcpu_run does not change stack or frame pointer anymore.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Message-Id: <20200414113612.104501-1-ubizjak@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
nested_vmx_exit_reflected() returns a bool, not int. As such, refer to
the return values as true/false in the comment instead of 1/0.
Signed-off-by: Oliver Upton <oupton@google.com>
Message-Id: <20200414221241.134103-1-oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
According to SDM 26.6.2, it is possible to inject an MTF VM-exit via the
VM-entry interruption-information field regardless of the 'monitor trap
flag' VM-execution control. KVM appropriately copies the VM-entry
interruption-information field from vmcs12 to vmcs02. However, if L1
has not set the 'monitor trap flag' VM-execution control, KVM fails to
reflect the subsequent MTF VM-exit into L1.
Fix this by consulting the VM-entry interruption-information field of
vmcs12 to determine if L1 has injected the MTF VM-exit. If so, reflect
the exit, regardless of the 'monitor trap flag' VM-execution control.
Fixes: 5f3d45e7f2 ("kvm/x86: add support for MONITOR_TRAP_FLAG")
Signed-off-by: Oliver Upton <oupton@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20200414224746.240324-1-oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is no reason to limit the use of do_machine_check
to 64bit targets. MCE handling works for both target familes.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: stable@vger.kernel.org
Fixes: a0861c02a9 ("KVM: Add VT-x machine check support")
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Message-Id: <20200414071414.45636-1-ubizjak@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Manipulate IF around vmload/vmsave to remove the confusing usage of
local_irq_enable where interrupts are actually disabled via GIF.
And stuff the RSB immediately without waiting for a RET to avoid
Spectre-v2 attacks.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use svm_sev_enabled() in order to cull all calls to PSP code. Otherwise,
compilation fails with undefined symbols if the PSP device driver is compiled
as a module and KVM is not.
Reported-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If KVM wasn't used at all before we crash the cleanup procedure fails with
BUG: unable to handle page fault for address: ffffffffffffffc8
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 23215067 P4D 23215067 PUD 23217067 PMD 0
Oops: 0000 [#8] SMP PTI
CPU: 0 PID: 3542 Comm: bash Kdump: loaded Tainted: G D 5.6.0-rc2+ #823
RIP: 0010:crash_vmclear_local_loaded_vmcss.cold+0x19/0x51 [kvm_intel]
The root cause is that loaded_vmcss_on_cpu list is not yet initialized,
we initialize it in hardware_enable() but this only happens when we start
a VM.
Previously, we used to have a bitmap with enabled CPUs and that was
preventing [masking] the issue.
Initialized loaded_vmcss_on_cpu list earlier, right before we assign
crash_vmclear_loaded_vmcss pointer. blocked_vcpu_on_cpu list and
blocked_vcpu_on_cpu_lock are moved altogether for consistency.
Fixes: 31603d4fc2 ("KVM: VMX: Always VMCLEAR in-use VMCSes during crash with kexec support")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200401081348.1345307-1-vkuznets@redhat.com>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Except destination shorthand, a destination value 0xffffffff is used to
broadcast interrupts, let's also filter out this for single target IPI
fastpath.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1585815626-28370-1-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If nested events are blocked, don't clear the mtf_pending flag to avoid
missing later delivery of the MTF VM-exit.
Fixes: 5ef8acbdd6 ("KVM: nVMX: Emulate MTF when performing instruction emulation")
Signed-off-by: Oliver Upton <oupton@google.com>
Message-Id: <20200406201237.178725-1-oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The exception trampoline in .fixup section is not needed, the exception
handling code can jump directly to the label in the .text section.
Changes since v1:
- Fix commit message.
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Message-Id: <20200406202108.74300-1-ubizjak@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The compiler (GCC) does not like the situation, where there is inline
assembly block that clobbers all available machine registers in the
middle of the function. This situation can be found in function
svm_vcpu_run in file kvm/svm.c and results in many register spills and
fills to/from stack frame.
This patch fixes the issue with the same approach as was done for
VMX some time ago. The big inline assembly is moved to a separate
assembly .S file, taking into account all ABI requirements.
There are two main benefits of the above approach:
* elimination of several register spills and fills to/from stack
frame, and consequently smaller function .text size. The binary size
of svm_vcpu_run is lowered from 2019 to 1626 bytes.
* more efficient access to a register save array. Currently, register
save array is accessed as:
7b00: 48 8b 98 28 02 00 00 mov 0x228(%rax),%rbx
7b07: 48 8b 88 18 02 00 00 mov 0x218(%rax),%rcx
7b0e: 48 8b 90 20 02 00 00 mov 0x220(%rax),%rdx
and passing ia pointer to a register array as an argument to a function one gets:
12: 48 8b 48 08 mov 0x8(%rax),%rcx
16: 48 8b 50 10 mov 0x10(%rax),%rdx
1a: 48 8b 58 18 mov 0x18(%rax),%rbx
As a result, the total size, considering that the new function size is 229
bytes, gets lowered by 164 bytes.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the SEV specific parts of svm.c into the new sev.c file.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Message-Id: <20200324094154.32352-5-joro@8bytes.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the AVIC related functions from svm.c to the new avic.c file.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Message-Id: <20200324094154.32352-4-joro@8bytes.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Split out the code for the nested SVM implementation and move it to a
separate file.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Message-Id: <20200324094154.32352-3-joro@8bytes.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move svm.c and pmu_amd.c into their own arch/x86/kvm/svm/
subdirectory.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Message-Id: <20200324094154.32352-2-joro@8bytes.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* GICv4.1 support
* 32bit host removal
PPC:
* secure (encrypted) using under the Protected Execution Framework
ultravisor
s390:
* allow disabling GISA (hardware interrupt injection) and protected
VMs/ultravisor support.
x86:
* New dirty bitmap flag that sets all bits in the bitmap when dirty
page logging is enabled; this is faster because it doesn't require bulk
modification of the page tables.
* Initial work on making nested SVM event injection more similar to VMX,
and less buggy.
* Various cleanups to MMU code (though the big ones and related
optimizations were delayed to 5.8). Instead of using cr3 in function
names which occasionally means eptp, KVM too has standardized on "pgd".
* A large refactoring of CPUID features, which now use an array that
parallels the core x86_features.
* Some removal of pointer chasing from kvm_x86_ops, which will also be
switched to static calls as soon as they are available.
* New Tigerlake CPUID features.
* More bugfixes, optimizations and cleanups.
Generic:
* selftests: cleanups, new MMU notifier stress test, steal-time test
* CSV output for kvm_stat.
KVM/MIPS has been broken since 5.5, it does not compile due to a patch committed
by MIPS maintainers. I had already prepared a fix, but the MIPS maintainers
prefer to fix it in generic code rather than KVM so they are taking care of it.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl6GOnIUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMfxwf/ZKLZiRoaovXCOG71M/eHtQb8ZIqU
3MPy+On3eC5Sk/aBxWUL9EFZsbYG6kYdbZ1VOvG9XPBoLlnkDSm/IR0kaELHtnjj
oGVda/tvGn46Ne39y8xBptmb91WDcWH0vFthT/CwlMxAw3xjr+gG7Qyo+8F2CW6m
SSSuLiHSBnyO1cQKruBTHZ8qnR8LlnfXEqtd6Y4LFLic0LbLIoIdRcT3wjQrcZrm
Djd7wbTEYZjUfoqZ72ekwEDUsONcDLDSKcguDO9pSMSCGhpxCVT5Vy68KRpoIMs2
nzNWDKjvqQo5zb2+GWxJgkd12Hv+n7PCXZMbVrWBu1pQsewUns9m4mkpGw==
=6fGt
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- GICv4.1 support
- 32bit host removal
PPC:
- secure (encrypted) using under the Protected Execution Framework
ultravisor
s390:
- allow disabling GISA (hardware interrupt injection) and protected
VMs/ultravisor support.
x86:
- New dirty bitmap flag that sets all bits in the bitmap when dirty
page logging is enabled; this is faster because it doesn't require
bulk modification of the page tables.
- Initial work on making nested SVM event injection more similar to
VMX, and less buggy.
- Various cleanups to MMU code (though the big ones and related
optimizations were delayed to 5.8). Instead of using cr3 in
function names which occasionally means eptp, KVM too has
standardized on "pgd".
- A large refactoring of CPUID features, which now use an array that
parallels the core x86_features.
- Some removal of pointer chasing from kvm_x86_ops, which will also
be switched to static calls as soon as they are available.
- New Tigerlake CPUID features.
- More bugfixes, optimizations and cleanups.
Generic:
- selftests: cleanups, new MMU notifier stress test, steal-time test
- CSV output for kvm_stat"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (277 commits)
x86/kvm: fix a missing-prototypes "vmread_error"
KVM: x86: Fix BUILD_BUG() in __cpuid_entry_get_reg() w/ CONFIG_UBSAN=y
KVM: VMX: Add a trampoline to fix VMREAD error handling
KVM: SVM: Annotate svm_x86_ops as __initdata
KVM: VMX: Annotate vmx_x86_ops as __initdata
KVM: x86: Drop __exit from kvm_x86_ops' hardware_unsetup()
KVM: x86: Copy kvm_x86_ops by value to eliminate layer of indirection
KVM: x86: Set kvm_x86_ops only after ->hardware_setup() completes
KVM: VMX: Configure runtime hooks using vmx_x86_ops
KVM: VMX: Move hardware_setup() definition below vmx_x86_ops
KVM: x86: Move init-only kvm_x86_ops to separate struct
KVM: Pass kvm_init()'s opaque param to additional arch funcs
s390/gmap: return proper error code on ksm unsharing
KVM: selftests: Fix cosmetic copy-paste error in vm_mem_region_move()
KVM: Fix out of range accesses to memslots
KVM: X86: Micro-optimize IPI fastpath delay
KVM: X86: Delay read msr data iff writes ICR MSR
KVM: PPC: Book3S HV: Add a capability for enabling secure guests
KVM: arm64: GICv4.1: Expose HW-based SGIs in debugfs
KVM: arm64: GICv4.1: Allow non-trapping WFI when using HW SGIs
...
to avoid the warnings, but generated code is not supposed to be affected.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Vx32
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2020-04-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Ingo Molnar:
"A single fix addressing Sparse warnings. <asm/bitops.h> is changed
non-trivially to avoid the warnings, but generated code is not
supposed to be affected"
* tag 'x86-urgent-2020-04-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Fix bitops.h warning with a moved cast
Pull integrity updates from Mimi Zohar:
"Just a couple of updates for linux-5.7:
- A new Kconfig option to enable IMA architecture specific runtime
policy rules needed for secure and/or trusted boot, as requested.
- Some message cleanup (eg. pr_fmt, additional error messages)"
* 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: add a new CONFIG for loading arch-specific policies
integrity: Remove duplicate pr_fmt definitions
IMA: Add log statements for failure conditions
IMA: Update KBUILD_MODNAME for IMA files to ima
Merge updates from Andrew Morton:
"A large amount of MM, plenty more to come.
Subsystems affected by this patch series:
- tools
- kthread
- kbuild
- scripts
- ocfs2
- vfs
- mm: slub, kmemleak, pagecache, gup, swap, memcg, pagemap, mremap,
sparsemem, kasan, pagealloc, vmscan, compaction, mempolicy,
hugetlbfs, hugetlb"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (155 commits)
include/linux/huge_mm.h: check PageTail in hpage_nr_pages even when !THP
mm/hugetlb: fix build failure with HUGETLB_PAGE but not HUGEBTLBFS
selftests/vm: fix map_hugetlb length used for testing read and write
mm/hugetlb: remove unnecessary memory fetch in PageHeadHuge()
mm/hugetlb.c: clean code by removing unnecessary initialization
hugetlb_cgroup: add hugetlb_cgroup reservation docs
hugetlb_cgroup: add hugetlb_cgroup reservation tests
hugetlb: support file_region coalescing again
hugetlb_cgroup: support noreserve mappings
hugetlb_cgroup: add accounting for shared mappings
hugetlb: disable region_add file_region coalescing
hugetlb_cgroup: add reservation accounting for private mappings
mm/hugetlb_cgroup: fix hugetlb_cgroup migration
hugetlb_cgroup: add interface for charge/uncharge hugetlb reservations
hugetlb_cgroup: add hugetlb_cgroup reservation counter
hugetlbfs: Use i_mmap_rwsem to address page fault/truncate race
hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization
mm/memblock.c: remove redundant assignment to variable max_addr
mm: mempolicy: require at least one nodeid for MPOL_PREFERRED
mm: mempolicy: use VM_BUG_ON_VMA in queue_pages_test_walk()
...
The commit 842f4be958 ("KVM: VMX: Add a trampoline to fix VMREAD error
handling") removed the declaration of vmread_error() causes a W=1 build
failure with KVM_WERROR=y. Fix it by adding it back.
arch/x86/kvm/vmx/vmx.c:359:17: error: no previous prototype for 'vmread_error' [-Werror=missing-prototypes]
asmlinkage void vmread_error(unsigned long field, bool fault)
^~~~~~~~~~~~
Signed-off-by: Qian Cai <cai@lca.pw>
Message-Id: <20200402153955.1695-1-cai@lca.pw>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The idea comes from a discussion between Linus and Andrea [1].
Before this patch we only allow a page fault to retry once. We achieved
this by clearing the FAULT_FLAG_ALLOW_RETRY flag when doing
handle_mm_fault() the second time. This was majorly used to avoid
unexpected starvation of the system by looping over forever to handle the
page fault on a single page. However that should hardly happen, and after
all for each code path to return a VM_FAULT_RETRY we'll first wait for a
condition (during which time we should possibly yield the cpu) to happen
before VM_FAULT_RETRY is really returned.
This patch removes the restriction by keeping the FAULT_FLAG_ALLOW_RETRY
flag when we receive VM_FAULT_RETRY. It means that the page fault handler
now can retry the page fault for multiple times if necessary without the
need to generate another page fault event. Meanwhile we still keep the
FAULT_FLAG_TRIED flag so page fault handler can still identify whether a
page fault is the first attempt or not.
Then we'll have these combinations of fault flags (only considering
ALLOW_RETRY flag and TRIED flag):
- ALLOW_RETRY and !TRIED: this means the page fault allows to
retry, and this is the first try
- ALLOW_RETRY and TRIED: this means the page fault allows to
retry, and this is not the first try
- !ALLOW_RETRY and !TRIED: this means the page fault does not allow
to retry at all
- !ALLOW_RETRY and TRIED: this is forbidden and should never be used
In existing code we have multiple places that has taken special care of
the first condition above by checking against (fault_flags &
FAULT_FLAG_ALLOW_RETRY). This patch introduces a simple helper to detect
the first retry of a page fault by checking against both (fault_flags &
FAULT_FLAG_ALLOW_RETRY) and !(fault_flag & FAULT_FLAG_TRIED) because now
even the 2nd try will have the ALLOW_RETRY set, then use that helper in
all existing special paths. One example is in __lock_page_or_retry(), now
we'll drop the mmap_sem only in the first attempt of page fault and we'll
keep it in follow up retries, so old locking behavior will be retained.
This will be a nice enhancement for current code [2] at the same time a
supporting material for the future userfaultfd-writeprotect work, since in
that work there will always be an explicit userfault writeprotect retry
for protected pages, and if that cannot resolve the page fault (e.g., when
userfaultfd-writeprotect is used in conjunction with swapped pages) then
we'll possibly need a 3rd retry of the page fault. It might also benefit
other potential users who will have similar requirement like userfault
write-protection.
GUP code is not touched yet and will be covered in follow up patch.
Please read the thread below for more information.
[1] https://lore.kernel.org/lkml/20171102193644.GB22686@redhat.com/
[2] https://lore.kernel.org/lkml/20181230154648.GB9832@redhat.com/
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Suggested-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Brian Geffon <bgeffon@google.com>
Cc: Bobby Powers <bobbypowers@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Denis Plotnikov <dplotnikov@virtuozzo.com>
Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Martin Cracauer <cracauer@cons.org>
Cc: Marty McFadden <mcfadden8@llnl.gov>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Maya Gokhale <gokhale2@llnl.gov>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Link: http://lkml.kernel.org/r/20200220160246.9790-1-peterx@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Although there're tons of arch-specific page fault handlers, most of them
are still sharing the same initial value of the page fault flags. Say,
merely all of the page fault handlers would allow the fault to be retried,
and they also allow the fault to respond to SIGKILL.
Let's define a default value for the fault flags to replace those initial
page fault flags that were copied over. With this, it'll be far easier to
introduce new fault flag that can be used by all the architectures instead
of touching all the archs.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Brian Geffon <bgeffon@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Bobby Powers <bobbypowers@gmail.com>
Cc: Denis Plotnikov <dplotnikov@virtuozzo.com>
Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Martin Cracauer <cracauer@cons.org>
Cc: Marty McFadden <mcfadden8@llnl.gov>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Maya Gokhale <gokhale2@llnl.gov>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Link: http://lkml.kernel.org/r/20200220160238.9694-1-peterx@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Let's move the fatal signal check even earlier so that we can directly use
the new fault_signal_pending() in x86 mm code.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Brian Geffon <bgeffon@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Bobby Powers <bobbypowers@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Denis Plotnikov <dplotnikov@virtuozzo.com>
Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Martin Cracauer <cracauer@cons.org>
Cc: Marty McFadden <mcfadden8@llnl.gov>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Maya Gokhale <gokhale2@llnl.gov>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Link: http://lkml.kernel.org/r/20200220155353.8676-5-peterx@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Idea of a foreign VMA with respect to the present context is very generic.
But currently there are two identical definitions for this in powerpc and
x86 platforms. Lets consolidate those redundant definitions while making
vma_is_foreign() available for general use later. This should not cause
any functional change.
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Link: http://lkml.kernel.org/r/1582782965-3274-3-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Change a header to mandatory-y if both of the following are met:
[1] At least one architecture (except um) specifies it as generic-y in
arch/*/include/asm/Kbuild
[2] Every architecture (except um) either has its own implementation
(arch/*/include/asm/*.h) or specifies it as generic-y in
arch/*/include/asm/Kbuild
This commit was generated by the following shell script.
----------------------------------->8-----------------------------------
arches=$(cd arch; ls -1 | sed -e '/Kconfig/d' -e '/um/d')
tmpfile=$(mktemp)
grep "^mandatory-y +=" include/asm-generic/Kbuild > $tmpfile
find arch -path 'arch/*/include/asm/Kbuild' |
xargs sed -n 's/^generic-y += \(.*\)/\1/p' | sort -u |
while read header
do
mandatory=yes
for arch in $arches
do
if ! grep -q "generic-y += $header" arch/$arch/include/asm/Kbuild &&
! [ -f arch/$arch/include/asm/$header ]; then
mandatory=no
break
fi
done
if [ "$mandatory" = yes ]; then
echo "mandatory-y += $header" >> $tmpfile
for arch in $arches
do
sed -i "/generic-y += $header/d" arch/$arch/include/asm/Kbuild
done
fi
done
sed -i '/^mandatory-y +=/d' include/asm-generic/Kbuild
LANG=C sort $tmpfile >> include/asm-generic/Kbuild
----------------------------------->8-----------------------------------
One obvious benefit is the diff stat:
25 files changed, 52 insertions(+), 557 deletions(-)
It is tedious to list generic-y for each arch that needs it.
So, mandatory-y works like a fallback default (by just wrapping
asm-generic one) when arch does not have a specific header
implementation.
See the following commits:
def3f7cefea1b39bae16
It is tedious to convert headers one by one, so I processed by a shell
script.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Link: http://lkml.kernel.org/r/20200210175452.5030-1-masahiroy@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull trivial tree updates from Jiri Kosina:
"My attempt to revitalize trivial queue I've been neglecting for years
(what a disaster that was for this world, right? :) ) with patches
collected from backlog that were still relevant and not applied
elsewhere in the meantime"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
err.h: remove deprecated PTR_RET for good
blk-mq: Fix typo in comment
x86/boot: Fix comment spelling
sh: mach-highlander: Fix comment spelling
s390/dasd: Fix comment spelling
mfd: wm8994: Fix comment spelling
docs: Add reference in binfmt-misc.rst
genirq: fix kerneldoc comment for irq_desc
drm/amdgpu: fix two documentation mismatch issues
HID: fix Kconfig word ordering
list/hashtable: minor documentation corrections.
Pull crypto updates from Herbert Xu:
"API:
- Fix out-of-sync IVs in self-test for IPsec AEAD algorithms
Algorithms:
- Use formally verified implementation of x86/curve25519
Drivers:
- Enhance hwrng support in caam
- Use crypto_engine for skcipher/aead/rsa/hash in caam
- Add Xilinx AES driver
- Add uacce driver
- Register zip engine to uacce in hisilicon
- Add support for OCTEON TX CPT engine in marvell"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (162 commits)
crypto: af_alg - bool type cosmetics
crypto: arm[64]/poly1305 - add artifact to .gitignore files
crypto: caam - limit single JD RNG output to maximum of 16 bytes
crypto: caam - enable prediction resistance in HRWNG
bus: fsl-mc: add api to retrieve mc version
crypto: caam - invalidate entropy register during RNG initialization
crypto: caam - check if RNG job failed
crypto: caam - simplify RNG implementation
crypto: caam - drop global context pointer and init_done
crypto: caam - use struct hwrng's .init for initialization
crypto: caam - allocate RNG instantiation descriptor with GFP_DMA
crypto: ccree - remove duplicated include from cc_aead.c
crypto: chelsio - remove set but not used variable 'adap'
crypto: marvell - enable OcteonTX cpt options for build
crypto: marvell - add the Virtual Function driver for CPT
crypto: marvell - add support for OCTEON TX CPT engine
crypto: marvell - create common Kconfig and Makefile for Marvell
crypto: arm/neon - memzero_explicit aes-cbc key
crypto: bcm - Use scnprintf() for avoiding potential buffer overflow
crypto: atmel-i2c - Fix wakeup fail
...
This is partly for readability - using named arguments instead of
numbered ones makes it muchmore obvious just what is going on. Using
"%[efault]" instead of "%4" for the special -EFAULT constant just means
that you don't have to count the arguments to see what's up.
But the motivation for all this cleanup is that when we'll start to
conditionally use "asm goto" even for the __get_user_asm() case, the
argument numbers will depend on whether we have an error output, or an
error label we can just directly jump to.
So this moves us towards named arguments for the same reason that we
have to use named arguments for the asms that use SET_CC(): numbering
will eventually become similarly unreliable and depends on whether we
can use particular compiler features or not.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the exact same thing as 3680785692 ("x86: get rid of 'rtype'
argument to __put_user_goto() macro") except it's about __get_user_asm()
rather than __put_user_goto().
The reasons are the same: having the low-level asm access the argument
with a different size than the compiler thinks it does is fundamentally
wrong.
But unlike the __put_user_goto() case, we actually did tell the compiler
that we used a bigger variable (either long or long long), and then only
filled in the low bits, and ended up "fixing" this by casting the result
to the proper pointer type.
That's because we needed to use a non-qualified type (the user pointer
might be a const pointer!), and that makes this a bit more painful. Our
'__inttype()' macro used to be lazy and only differentiate between "fits
in a register" or "needs two registers".
So this fix had to also make that '__inttype()' macro more precise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The 'rtype' argument goes back to pre-git (and pre-BK) times, and comes
from the fact that we used to not necessarily have the same type sizes
for the arguments of the inline asm as we did for the actual accesses we
did.
So 'rtype' is the 'register type' - the override of the register size in
the inline asm when it doesn't match the actual size of the variable we
use as the output argument (for when you used "put_user()" on an "int"
value that was assigned to a byte-sized user space access etc).
That mismatch doesn't actually exist any more, and should probably never
have existed in the first place. It's a horrid bug just waiting to
happen (using more - or less - of the variable that the compiler
expected us to use).
I think we had some odd casting going on to hide the effects of that
oddity after-the-fact, but those are long gone, and these days we should
always have the right size value in the first place, using things like
__typeof__(*(ptr)) __pu_val = (x);
and gcc should thus have the right register size without any manual
'rtype' games.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Every remaining user just has the error case returning -EFAULT.
In fact, the exception was __get_user_asm_nozero(), which was removed in
commit 4b842e4e25 ("x86: get rid of small constant size cases in
raw_copy_{to,from}_user()"), and the other __get_user_xyz() macros just
followed suit for consistency.
Fix up some macro whitespace while at it.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The last user was removed by commit 4b842e4e25 ("x86: get rid of small
constant size cases in raw_copy_{to,from}_user()"). Get rid of the
left-overs before somebody tries to use it again.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull networking updates from David Miller:
"Highlights:
1) Fix the iwlwifi regression, from Johannes Berg.
2) Support BSS coloring and 802.11 encapsulation offloading in
hardware, from John Crispin.
3) Fix some potential Spectre issues in qtnfmac, from Sergey
Matyukevich.
4) Add TTL decrement action to openvswitch, from Matteo Croce.
5) Allow paralleization through flow_action setup by not taking the
RTNL mutex, from Vlad Buslov.
6) A lot of zero-length array to flexible-array conversions, from
Gustavo A. R. Silva.
7) Align XDP statistics names across several drivers for consistency,
from Lorenzo Bianconi.
8) Add various pieces of infrastructure for offloading conntrack, and
make use of it in mlx5 driver, from Paul Blakey.
9) Allow using listening sockets in BPF sockmap, from Jakub Sitnicki.
10) Lots of parallelization improvements during configuration changes
in mlxsw driver, from Ido Schimmel.
11) Add support to devlink for generic packet traps, which report
packets dropped during ACL processing. And use them in mlxsw
driver. From Jiri Pirko.
12) Support bcmgenet on ACPI, from Jeremy Linton.
13) Make BPF compatible with RT, from Thomas Gleixnet, Alexei
Starovoitov, and your's truly.
14) Support XDP meta-data in virtio_net, from Yuya Kusakabe.
15) Fix sysfs permissions when network devices change namespaces, from
Christian Brauner.
16) Add a flags element to ethtool_ops so that drivers can more simply
indicate which coalescing parameters they actually support, and
therefore the generic layer can validate the user's ethtool
request. Use this in all drivers, from Jakub Kicinski.
17) Offload FIFO qdisc in mlxsw, from Petr Machata.
18) Support UDP sockets in sockmap, from Lorenz Bauer.
19) Fix stretch ACK bugs in several TCP congestion control modules,
from Pengcheng Yang.
20) Support virtual functiosn in octeontx2 driver, from Tomasz
Duszynski.
21) Add region operations for devlink and use it in ice driver to dump
NVM contents, from Jacob Keller.
22) Add support for hw offload of MACSEC, from Antoine Tenart.
23) Add support for BPF programs that can be attached to LSM hooks,
from KP Singh.
24) Support for multiple paths, path managers, and counters in MPTCP.
From Peter Krystad, Paolo Abeni, Florian Westphal, Davide Caratti,
and others.
25) More progress on adding the netlink interface to ethtool, from
Michal Kubecek"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2121 commits)
net: ipv6: rpl_iptunnel: Fix potential memory leak in rpl_do_srh_inline
cxgb4/chcr: nic-tls stats in ethtool
net: dsa: fix oops while probing Marvell DSA switches
net/bpfilter: remove superfluous testing message
net: macb: Fix handling of fixed-link node
net: dsa: ksz: Select KSZ protocol tag
netdevsim: dev: Fix memory leak in nsim_dev_take_snapshot_write
net: stmmac: add EHL 2.5Gbps PCI info and PCI ID
net: stmmac: add EHL PSE0 & PSE1 1Gbps PCI info and PCI ID
net: stmmac: create dwmac-intel.c to contain all Intel platform
net: dsa: bcm_sf2: Support specifying VLAN tag egress rule
net: dsa: bcm_sf2: Add support for matching VLAN TCI
net: dsa: bcm_sf2: Move writing of CFP_DATA(5) into slicing functions
net: dsa: bcm_sf2: Check earlier for FLOW_EXT and FLOW_MAC_EXT
net: dsa: bcm_sf2: Disable learning for ASP port
net: dsa: b53: Deny enslaving port 7 for 7278 into a bridge
net: dsa: b53: Prevent tagged VLAN on port 7 for 7278
net: dsa: b53: Restore VLAN entries upon (re)configuration
net: dsa: bcm_sf2: Fix overflow checks
hv_netvsc: Remove unnecessary round_up for recv_completion_cnt
...
[Build system]
- add CONFIG_UNUSED_KSYMS_WHITELIST, which will be useful to define
a fixed set of export symbols for Generic Kernel Image (GKI)
- allow to run 'make dt_binding_check' without .config
- use full schema for checking DT examples in *.yaml files
- make modpost fail for missing MODULE_IMPORT_NS(), which makes more
sense because we know the produced modules are never loadable
- Remove unused 'AS' variable
[Kconfig]
- sanitize DEFCONFIG_LIST, and remove ARCH_DEFCONFIG from Kconfig files
- relax the 'imply' behavior so that symbols implied by y can become m
- make 'imply' obey 'depends on' in order to make 'imply' really weak
[Misc]
- add documentation on building the kernel with Clang/LLVM
- revive __HAVE_ARCH_STRLEN for 32bit sparc to use optimized strlen()
- fix warning from deb-pkg builds when CONFIG_DEBUG_INFO=n
- various script and Makefile cleanups
-----BEGIN PGP SIGNATURE-----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=wT8A
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
"Build system:
- add CONFIG_UNUSED_KSYMS_WHITELIST, which will be useful to define a
fixed set of export symbols for Generic Kernel Image (GKI)
- allow to run 'make dt_binding_check' without .config
- use full schema for checking DT examples in *.yaml files
- make modpost fail for missing MODULE_IMPORT_NS(), which makes more
sense because we know the produced modules are never loadable
- Remove unused 'AS' variable
Kconfig:
- sanitize DEFCONFIG_LIST, and remove ARCH_DEFCONFIG from Kconfig
files
- relax the 'imply' behavior so that symbols implied by 'y' can
become 'm'
- make 'imply' obey 'depends on' in order to make 'imply' really weak
Misc:
- add documentation on building the kernel with Clang/LLVM
- revive __HAVE_ARCH_STRLEN for 32bit sparc to use optimized strlen()
- fix warning from deb-pkg builds when CONFIG_DEBUG_INFO=n
- various script and Makefile cleanups"
* tag 'kbuild-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits)
Makefile: Update kselftest help information
kbuild: deb-pkg: fix warning when CONFIG_DEBUG_INFO is unset
kbuild: add outputmakefile to no-dot-config-targets
kbuild: remove AS variable
net: wan: wanxl: refactor the firmware rebuild rule
net: wan: wanxl: use $(M68KCC) instead of $(M68KAS) for rebuilding firmware
net: wan: wanxl: use allow to pass CROSS_COMPILE_M68k for rebuilding firmware
kbuild: add comment about grouped target
kbuild: add -Wall to KBUILD_HOSTCXXFLAGS
kconfig: remove unused variable in qconf.cc
sparc: revive __HAVE_ARCH_STRLEN for 32bit sparc
kbuild: refactor Makefile.dtbinst more
kbuild: compute the dtbs_install destination more simply
Makefile: disallow data races on gcc-10 as well
kconfig: make 'imply' obey the direct dependency
kconfig: allow symbols implied by y to become m
net: drop_monitor: use IS_REACHABLE() to guard net_dm_hw_report()
modpost: return error if module is missing ns imports and MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS=n
modpost: rework and consolidate logging interface
kbuild: allow to run dt_binding_check without kernel configuration
...
