Commit Graph

18684 Commits

Author SHA1 Message Date
Olli Salonen
b02db9e1e0 [media] si2168: Small typo fix (SI2157 -> SI2168)
Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-14 21:07:04 -03:00
Antti Palosaari
1d518c2763 [media] si2168: receive 4 bytes reply from cmd 0x14
Command 0x14 returns 4 bytes as a reply. It is used for setting
key/value pairs to firmware and it returns 4 bytes back including
old value.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-14 21:07:04 -03:00
Antti Palosaari
982c6238cf [media] si2168: do not set values which are already on default
No need to set explicitly value that are already defaulted same.

Setting new value returns old value. Firmware default values can
be found just looking returned value.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-14 21:07:03 -03:00
Antti Palosaari
93f726396d [media] si2168: remove duplicate command
Same command was executed twice, but different value. Remove
redundant command.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-14 21:07:03 -03:00
Antti Palosaari
e6b4380f3e [media] si2157: add read data support for fw cmd func
We want also read data from firmware. Add support for it. Copied from
si2168 driver.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-14 21:07:02 -03:00
Antti Palosaari
88ac8f8606 [media] si2168: implement CNR statistic
Implement CNR statistic.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-14 21:07:02 -03:00
Antti Palosaari
888680ff9d [media] si2168: set cmd args using memcpy
Use memcpy for set cmd buffer in order to keep style in line with
rest of file.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-14 21:07:01 -03:00
Antti Palosaari
4de0ed7cf7 [media] si2168: implement sleep
Implement sleep for power-management.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-14 21:07:01 -03:00
Antti Palosaari
a83d7d17ad [media] si2157: implement sleep
Implement sleep for power-management.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-14 21:07:00 -03:00
Mauro Carvalho Chehab
3c0d394ea7 [media] dib8000: improve the message that reports per-layer locks
The message is currently highly encoded:
	[70299.863521] DiB8000: Mpeg locks [ L0 : 0 | L1 : 1 | L2 : 0 ]

And doesn't properly reflect that some problems might have happened.
Instead, display it as:
	[75160.822321] DiB8000: Not all ISDB-T layers locked in 32 ms: Layer A NOT LOCKED, Layer B locked, Layer C not enabled

In order to better reflect what's happening with layer locking.

Acked-By: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-07 09:59:01 -03:00
Mauro Carvalho Chehab
ecc31d557e [media] dib8000: improve debug messages
When debug is enabled:
	- Report when frontend gets restarted;
	- Be coherent on the displayed lines;
	- Show the transmission mode;
	- Hide unused layers.

No functional changes (except at the printk's).

Acked-By: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-07 09:59:00 -03:00
Mauro Carvalho Chehab
a768f90ef0 [media] dib8000: Update the ADC gain table
This table doesn't match the new one.
Update it.

Acked-By: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-07 09:58:59 -03:00
Mauro Carvalho Chehab
d6c62b7638 [media] dib8000: use jifies instead of current_kernel_time()
Instead of doing the tuning delays and timeouts using
current_kernel_time(), use jiffies. That consumes less
CPU cycles, and it is monotonic.

Acked-By: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-07 09:58:59 -03:00
Mauro Carvalho Chehab
0de04ca1dc [media] dib0090: Fix the sleep time at the state machine
msleep() is not too precise: its precision depends on the
HZ config. As the driver selects precise timings for the
state machine, change it to usleep_range().

Acked-By: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-07 09:58:55 -03:00
Mauro Carvalho Chehab
4607bb7a47 [media] dib8000: Fix the sleep time at the state machine
msleep() is not too precise: its precision depends on the
HZ config. As the driver selects precise timings for the
state machine, change it to usleep_range().

Acked-By: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-07 09:58:42 -03:00
Mauro Carvalho Chehab
40d1a7c3de [media] dib0700: better document struct init
Instead of using anonymous initialization for dib0896 structs,
identify each field by name. That helps to understand what's
being initialized.

No functional changes.

Acked-By: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-07 09:56:37 -03:00
Mauro Carvalho Chehab
6d38454a59 [media] dib8000: Restart sad during dib8000_reset
Just like the Windows driver, restart SAD during reset

Acked-By: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-07 09:56:30 -03:00
Mauro Carvalho Chehab
dde8e11536 [media] dib8000: In auto-search, try first with partial reception enabled
TV broadcasters generally use partial reception. So, enable it by
default in auto-search mode. The driver will latter detect if the
transmission is on some other mode.

Acked-By: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-07 09:56:23 -03:00
Mauro Carvalho Chehab
08623517f4 [media] dib8000: remove a double call for dib8000_get_symbol_duration()
The symbol duration was already obtained at CT_DEMOD_START.
No need to do it again at CT_DEMOD_STEP_3.

Acked-By: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-07 09:56:13 -03:00
Mauro Carvalho Chehab
7fec1c80a7 [media] dib8000: Fix: add missing 4K FFT mode
Without that, tuning may fail on 4K FFT mode, as the transmission
parameter cache will be initialized with a wrong value.

Acked-By: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-07 09:55:38 -03:00
Mauro Carvalho Chehab
7fa676c6f4 [media] dib8000: Fix alignments at dib8000_tune()
There are two tabs instead of one aligning this struct.
Worse than that, on some places, the alignment is wrong.
Fix it.

No functional changes.

Acked-By: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-07 09:55:31 -03:00
Mauro Carvalho Chehab
c063c7c6a3 [media] dib8000: Fix ADC OFF settings
The ADC OFF values are wrong. This causes troubles on detecting
weak signals.

Acked-By: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-07 09:55:16 -03:00
Mauro Carvalho Chehab
34ba2e65ba [media] dib8000: Fix handling of interleave bigger than 2
If interleave is bigger than 2, the code will set it to 0, as
dib8000 registers use a log2(). So, change the code to handle
it accordingly.

Acked-By: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-07 09:55:04 -03:00
Ramakrishnan Muthukrishnan
95cd5d5ee6 [media] media: remove the setting of the flag V4L2_FL_USE_FH_PRIO
Since all the drivers that use `struct v4l2_fh' use the core
priority checking, the setting of the flag in the drivers can
be removed.

Signed-off-by: Ramakrishnan Muthukrishnan <ramakrmu@cisco.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-04 16:14:59 -03:00
Ramakrishnan Muthukrishnan
b7284bb0be [media] media: v4l2-core: remove the use of V4L2_FL_USE_FH_PRIO flag
Since all the drivers that use `struct v4l2_fh' use the core priority
checking instead of doing it themselves, this flag can be removed.

This patch removes the usage of the flag from v4l2-core.

Signed-off-by: Ramakrishnan Muthukrishnan <ramakrmu@cisco.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-04 16:14:22 -03:00
Lars-Peter Clausen
c41ad9c38e [media] adv7604: Update recommended writes for the adv7611
Update the recommended writes to those mentioned in the Rev 1.5 version of the
ADV7611 Register Settings Recommendations document released by Analog Devices.
The document does not mention why the recommended settings have been updated,
but presumably those are more fine tuned settings that can enhance performance
in some cases.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-04 16:13:57 -03:00
Philipp Zabel
6bbd4fec0c [media] videobuf2-dma-contig: allow to vmap contiguous dma buffers
This allows drivers to vmap contiguous dma buffers so they can inspect the
buffer contents with the CPU. This will be needed for the CODA driver's JPEG
handling. On CODA960, the header parsing has to be done on the CPU. The
hardware modules can only process the entropy coded segment after all
registers and tables are set up.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-04 16:13:21 -03:00
Philipp Zabel
a85fd20fb6 [media] mem2mem: make queue lock in v4l2_m2m_poll interruptible
This patch makes the queue lock taken in v4l2_m2m_poll interruptible.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-04 16:11:44 -03:00
Dan Carpenter
7979fcaaf3 [media] cx18: remove duplicate CX18_ALSA_DBGFLG_WARN define
The CX18_ALSA_DBGFLG_WARN is cut and pasted twice and we can delete the
second instance.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-04 16:09:57 -03:00
Paul Bolle
2abfeef620 [media] dm644x_ccdc: remove check for CONFIG_DM644X_VIDEO_PORT_ENABLE
A check for CONFIG_DM644X_VIDEO_PORT_ENABLE was added in v2.6.32. The
related Kconfig symbol was never added so this check has always
evaluated to false. Remove that check.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-04 16:09:22 -03:00
Alexey Khoroshilov
e7d40c3721 [media] tlg2300: fix leak at failure path in poseidon_probe()
Error handling code in poseidon_probe() misses usb_put_intf()
and usb_put_dev().

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-04 15:45:20 -03:00
Pranith Kumar
8effbff4e2 [media] update reference, kerneltrap.org no longer works
kerneltrap.org no longer works, update to a working reference

Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Acked-by: Alexey Klimov <klimov.linux@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-04 15:44:10 -03:00
Rickard Strandqvist
e5a89998d4 [media] media: usb: dvb-usb-v2: mxl111sf.c: Cleaning up uninitialized variables
There is a risk that the variable will be used without being initialized.

This was largely found by using a static code analysis program called cppcheck.

Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-04 15:43:34 -03:00
Peter Senna Tschudin
4df16f702c [media] drivers/media: Remove useless return variables
This patch remove variables that are initialized with a constant,
are never updated, and are only used as parameter of return.
Return the constant instead of using a variable.

Verified by compilation only.

The coccinelle script that find and fixes this issue is:
// <smpl>
@@
type T;
constant C;
identifier ret;
@@
- T ret = C;
... when != ret
    when strict
return
- ret
+ C
;
// </smpl>

Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-04 15:35:27 -03:00
Peter Senna Tschudin
931387fa94 [media] drivers/media/usb/usbvision/usbvision-core.c: Remove useless return variables
This patch remove variables that are initialized with a constant,
are never updated, and are only used as parameter of return.
Return the constant instead of using a variable.

Verified by compilation only.

The coccinelle script that find and fixes this issue is:
// <smpl>
@@
type T;
constant C;
identifier ret;
@@
- T ret = C;
... when != ret
    when strict
return
- ret
+ C
;
// </smpl>

Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-04 15:35:02 -03:00
Hans Verkuil
e22eca7857 [media] em28xx: add MSI Digivox Trio support
Add support for the MSI Digivox Trio device.

Signed-off-by: P. van Gaans <w3ird_n3rd@gmx.net>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-04 15:34:40 -03:00
Benoit Taine
20f63150a2 [media] drx-j: Use kmemdup instead of kmalloc + memcpy
This issue was reported by coccicheck using the semantic patch
at scripts/coccinelle/api/memdup.cocci

Signed-off-by: Benoit Taine <benoit.taine@lip6.fr>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-04 15:34:21 -03:00
Alan
690130fe0b [media] dvb-frontends: Add static
Add static to tda m_* variables in the header. They don't need to be global.
With some cleanup they could probably even be marked const.

Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=68191

Reported-by: Christian Schneider <christian@ch-sc.de>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-04 15:33:46 -03:00
Alexander Bersenev
b4e3e59fb5 [media] rc: add sunxi-ir driver
This patch adds driver for sunxi IR controller.
It is based on Alexsey Shestacov's work based on the original driver
supplied by Allwinner.

Signed-off-by: Alexander Bersenev <bay@hackerdom.ru>
Signed-off-by: Alexsey Shestacov <wingrime@linux-sunxi.org>
[hdegoede@redhat.com: Changed compatible to sun4i-a10-ir]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-04 14:53:43 -03:00
Antonio Ospite
c87c0f079c [media] gspca_kinect: add support for the depth stream
Add support for the depth stream at 10bpp, for now use a 'depth_mode'
command line parameter to switch between video and depth mode.

Signed-off-by: Alexander Sosna <alexander@xxor.de>
Signed-off-by: Antonio Ospite <ao2@ao2.it>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-04 14:51:01 -03:00
Antonio Ospite
2fe152451d [media] gspca: provide a mechanism to select a specific transfer endpoint
Currently gspca selects the first ISOC input endpoint as the input
transfer endpoint, however some devices can provide streams on endpoints
different then the first one, so some subdrivers (e.g. gspca_kinect) may
want to select a specific endpoint to use as a transfer endpoint.

Add an xfer_ep field to struct gspca_dev, and change alt_xfer() so that
it accepts a parameter which represents a specific endpoint address to
look for.

If a subdriver wants to specify a value for gspca_dev->xfer_ep it can do
that in its sd_config() callback.

Signed-off-by: Antonio Ospite <ao2@ao2.it>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-04 14:50:11 -03:00
CrazyCat
b5b620584b [media] technisat-sub2: Fix stream curruption on high bitrate
Fix stream curruption on high bitrate (>60mbit).

Signed-off-by: Evgeny Plehov <EvgenyPlehov@ukr.net>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-26 09:20:18 -03:00
Mauro Carvalho Chehab
1fe3a8fe49 [media] au0828: don't hardcode height/width
While this device doesn't have a scaler (or have it disabled),
the screen dimentions are a function of the standard. Ok, right
now, only 480 lines standards are implemented, although it
supports other ones. Yet, let's calculate the size, to make
easier to add more standards latter.

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-19 13:36:10 -03:00
Mauro Carvalho Chehab
64ea37bbd8 [media] au0828: Only alt setting logic when needed
It seems that there's a bug at au0828 hardware/firmware
related to alternate setting: when the device is already at
alt 5, a further call causes the URBs to receive -ESHUTDOWN.

I found two different encarnations of this issue:

1) at qv4l2, it fails the second time we try to open the
video screen;
2) at xawtv, when audio underrun occurs, with is very
frequent, at least on my test machine.

The fix is simple: just check if alt=5 before calling
set_usb_interface().

Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-19 13:32:03 -03:00
Mauro Carvalho Chehab
f2fd7ce6f2 [media] au0828/au8522: Add PAL-M support
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-19 13:31:37 -03:00
Mauro Carvalho Chehab
c9f5ccc24d [media] au8522: Fix demod analog mode setting
There are several issues on the current code:
	1) msleep(1) is actually equivalent to msleep(10);
	2) au8522_video_set() will set reg 0xa4 to the
	   proper value for SIF, CVBS or S-Video. No need
	   to force it to CVBS;
	3) Let's not hardcode 0x9d for CBS on audio_set.

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-19 13:31:17 -03:00
Mauro Carvalho Chehab
65c8820912 [media] au8522: cleanup s-video settings at setup_decoder_defaults()
setup_decoder_defaults() doesn't really care about the input
port. All it needs to know is if the input port is s-video or
not.

As the caller function already knows that, just pass a boolean
instead.

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-19 13:27:06 -03:00
Mauro Carvalho Chehab
d289cdf022 [media] au8522: be sure that we'll setup audio routing at the right time
Let's set the the audio routing also at stream start. With this change,
we don't risk enabling the analog demux while not streaming, reducing
the risk of interfering with a DVB demux that might be happening.

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-19 13:26:28 -03:00
Mauro Carvalho Chehab
38fe3510fa [media] au8522: be sure that the setup will happen at streamon time
The same demod is used on both analog and digital mode. We should
not let the commands for analog mode to happen while the device
is in digital mode. So, monitor it via streamon.

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-19 13:25:25 -03:00
Mauro Carvalho Chehab
364693166c [media] au8522: move input_mode out one level
The input mode is used not only inside the setup_decoder_defaults()
but also at au8522_*_mode routines.

So, move it one level up. As an advantage, we can now group the
function that sets the input into just one.

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-19 13:25:00 -03:00
Mauro Carvalho Chehab
0bf49ec9f7 [media] au0828: add missing tuner Kconfig dependency
The analog part of au0828 is missing the tuner Kconfig dependency.
That makes the device to not work while in analog mode.

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-19 13:16:49 -03:00
James Hogan
2ac6f6305e [media] rc: img-ir: Expand copyright headers with GPL notices
Add the basic GPLv2+ license notice to the copyright headers at the top
of all the source files in the img-ir driver.

Reported-by: David Härdeman <david@hardeman.nu>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-17 12:04:55 -03:00
Jean Delvare
163438b8c7 [media] V4L2: soc_camera: Add run-time dependencies to sh_mobile drivers
The sh_mobile_ceu_camera and sh_mobile_csi2 drivers are only useful on
SuperH and shmobile unless build testing.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-17 12:04:54 -03:00
Alexander Shiyan
50f06b88b4 [media] media: mx2_camera: Change Kconfig dependency
This patch change MACH_MX27 dependency to SOC_IMX27 for MX2 camera
driver, since MACH_MX27 symbol is scheduled for removal.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-17 12:04:54 -03:00
Alexander Shiyan
90b055898e [media] media: mx1_camera: Remove driver
That driver hasn't been really maintained for a long time. It doesn't
compile in any way, it includes non-existent headers, has no users,
and marked as "BROKEN" more than year. Due to these factors, mx1_camera
is now removed from the tree.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-17 12:04:53 -03:00
Jean Delvare
0b91199984 [media] V4L2: soc_camera: add run-time dependencies to R-Car VIN driver
The R-Car Video Input driver is only useful on shmobile unless build
testing.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-17 12:04:53 -03:00
Ben Dooks
25dfa02ce2 [media] rcar_vin: copy flags from pdata
The platform data is a single word, so simply copy
it into the device's private data structure than
keeping a copy of the pointer.

This will make changing to device-tree binding
easier as it is one allocation instead of two.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-17 12:04:52 -03:00
Guennadi Liakhovetski
057c2a2ef5 [media] V4L: soc-camera: explicitly free allocated managed memory on error
devm_kzalloc() allocations are freed when the device is unbound. But if a
certain path fails and the allocated memory cannot be used anyway it is
better to free it explicitly immediately. This patch does exactly this if
asynchronous group probing in scan_async_group() fails after memory has
been allocated.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-17 12:04:52 -03:00
Mauro Carvalho Chehab
3926d91a6b [media] dib7000p: Callibrate signal strength
Calibrate the signal strength to dB.

For this callibration, I used adapter 0 (antenna 1), connected
via a normal cable to a DTF-2111 generator.

The same cabling and RF generator connected to adapter 1
(antenna 2) has a difference of +3dBm (signal was stronger
there).

Yet, changing the RF for a difference of, let's say, 6dB
reflected on a 6dB difference at the measured signal, with
is good.

So, the signal strengh can indeed be used to measure the
antenna gain, if the antenna is repositioned. It is
not precise to measure the absolute dBm value, however.

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-17 12:04:51 -03:00
Mauro Carvalho Chehab
041ad44968 [media] dib7000p: Add DVBv5 stats support
Adds DVBv5 stats support. For now, just mimic whatever dib8000
does, as they're very similar, with regards to statistics.

However, dib7000p_get_time_us() likely require some
adjustments, as I didn't actually reviewed the formula
for it to work with DVB-T. Still, better than nothing,
as latter patches can improve it.

This patch also doesn't show the signal strength in dB
yet. The code is already there, but it requires to be
callibrated.

A latter patch will do the calibration.

It seems that this patch is also a bug fix: Before this
patch, the frontend were not tuning with some userspace
tools. I suspect that dib7000p firmware or hardware
internally expects that the statistics to be collected,
in order for it to work. With this patch, the DVB core
will always retrive statistics, even if userspace doesn't
request. So, it makes the device work on all tested apps.

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-17 12:04:50 -03:00
Mauro Carvalho Chehab
d44913c1e5 [media] dib8000: export just one symbol
Exporting multiple symbols don't work as it causes compilation
breakages, due to the way dvb_attach() works.

The bug happens when:
        CONFIG_DVB_DIB8000=m
	CONFIG_DVB_USB_DIB0700=y

As a bonus, dib8000 won't be loaded anymore if the device uses
a different frontend, reducing the memory footprint.

Tested with both Pixelview PV-D231 and MyGica S870.

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-17 12:04:50 -03:00
Mauro Carvalho Chehab
b9bc7d59b7 [media] dib8000: rename dib8000_attach to dib8000_init
Well, what we call as "foo_attach" is the method that should
be called by the dvb_attach() macro.

It should be noticed that the name "dvb_attach" is really a
bad name and don't express what it does.

dvb_attach() basically does three things, if the frontend is
compiled as a module:
- It lookups for the module that it is known to have the
  given symbol name and requests such module;
- It increments the module usage (anonymously - so lsmod
  doesn't print who loaded the module);
- after loading the module, it runs the function associated
  with the dynamic symbol.

When compiled as builtin, it just calls the function given to it.

As dvb_attach() increments refcount, it can't be (easily)
called more than once for the same module, or the kernel
will deny to remove the module, because refcount will never
be zeroed.

In other words, the function name given to dvb_attach()
should be one single symbol that will always be called
before any other function on that module to be used.

For almost all DVB frontends, there's just one function,
but, on dib8000, there are several exported symbols.

We need to get rid of all those direct calls, because they
cause compilation breakages when bridge is builtin and
frontend is module, we'll need to add a new function that
will be the first one to be called, whatever initialization
is needed.

So, let's rename this function, in order to prepare for
a next patch that will add a new attach() function that
will be the only one exported by this module.

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-17 12:04:49 -03:00
Mauro Carvalho Chehab
8abe4a0a3f [media] dib7000: export just one symbol
Exporting multiple symbols don't work as it causes compilation
breakages, due to the way dvb_attach() works.

This were reported several times, like:

   drivers/built-in.o: In function `cxusb_dualdig4_rev2_tuner_attach':
>> cxusb.c:(.text+0x27d4b5): undefined reference to `dib7000p_get_i2c_master'
   drivers/built-in.o: In function `dib7070_set_param_override':
   cxusb.c:(.text+0x27d5a5): undefined reference to `dib0070_wbd_offset'
>> cxusb.c:(.text+0x27d5be): undefined reference to `dib7000p_set_wbd_ref'
   drivers/built-in.o: In function `dib7070_tuner_reset':
>> cxusb.c:(.text+0x27d5f9): undefined reference to `dib7000p_set_gpio'
   drivers/built-in.o: In function `cxusb_dualdig4_rev2_frontend_attach':
>> cxusb.c:(.text+0x27df5c): undefined reference to `dib7000p_i2c_enumeration'

In this specific report:
	CONFIG_DVB_USB_CXUSB=y
	CONFIG_DVB_DIB7000P=m

But the same type of bug can happen if:
	CONFIG_DVB_DIB7000P=m
and one of the bridge drivers is compiled builtin (cxusb, cx23885-dvb
and/or dib0700).

As a bonus, dib7000p won't be loaded anymore if the device uses
a different frontend, reducing the memory footprint.

Tested with Hauppauge Nova-TD (2 frontends).

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-17 12:04:49 -03:00
Mauro Carvalho Chehab
7f67d96ab1 [media] dib7000p: rename dib7000p_attach to dib7000p_init
Well, what we call as "foo_attach" is the method that should
be called by the dvb_attach() macro.

It should be noticed that the name "dvb_attach" is really a
bad name and don't express what it does.

dvb_attach() basically does three things, if the frontend is
compiled as a module:
- It lookups for the module that it is known to have the
  given symbol name and requests such module;
- It increments the module usage (anonymously - so lsmod
  doesn't print who loaded the module);
- after loading the module, it runs the function associated
  with the dynamic symbol.

When compiled as builtin, it just calls the function given to it.

As dvb_attach() increments refcount, it can't be (easily)
called more than once for the same module, or the kernel
will deny to remove the module, because refcount will never
be zeroed.

In other words, the function name given to dvb_attach()
should be one single symbol that will always be called
before any other function on that module to be used.

For almost all DVB frontends, there's just one function.

However, the dib7000p initialization can require up to 3
functions to be called:
	- dib7000p_get_i2c_master;
	- dib7000p_i2c_enumeration;
	- dib7000p_init (before this patch dib7000_attach).

(plus a bunch of other functions that the bridge driver will
need to call).

As we need to get rid of all those direct calls, because they
cause compilation breakages when bridge is builtin and
frontend is module, we'll need to add a new function that
will be the first one to be called, whatever initialization
is needed.

So, let's rename the function that probes and init the hardware
to dib7000p_init.

A latter patch will add a new dib7000p_attach that will be
used as originally conceived by dvb_attach() way.

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-17 12:04:48 -03:00
Mauro Carvalho Chehab
4647f48708 [media] dvbdev: add a dvb_detach() macro
The dvb_attach() was unbalanced, as there was no dvb_dettach. Ok,
on current cases, the dettach is done by dvbdev, but that are some
future corner cases where we may need to do this before registering
the frontend.

So, add a dvb_detach() and use it at dvb_frontend.c.

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-17 12:04:47 -03:00
Malcolm Priestley
3a370222b0 [media] lmedm04: rs2000 check if interrupt urb is over due
Change handling of signal_lock on rs2000. Use ibuf[2] to detect
lock as there is a longer wait for lock to appear in ibuf[6].

Remove last_key and key_timeout and use jiffies plus 60ms
to detect that streaming is still active.

If the current jiffies is time_after the interrupt urb overdue and
clear signal lock.

This results in far faster recovery of lock and streaming.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-17 12:04:47 -03:00
Alexander Shiyan
3c1e7f2756 [media] m2m-deinterlace: Convert to devm* API
Replace resource handling in the driver with managed device resource.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-17 12:04:46 -03:00
Alexey Khoroshilov
ebdae6507b [media] usbtv: fix leak at failure path in usbtv_probe()
Error handling code in usbtv_probe() misses usb_put_dev().

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Acked-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-17 12:04:46 -03:00
Sakari Ailus
f8d36b8960 [media] smiapp: I2C address is the last part of the subdev name
The I2C address of the sensor device was in the middle of the sub-device
name and not in the end as it should have been. The smiapp sub-device names
will change from e.g. "vs6555 1-0010 pixel array" to "vs6555 pixel array
1-0010".

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-17 12:04:45 -03:00
Lad, Prabhakar
a4965c592e [media] media: davinci: vpif_capture: fix v4l-compliance issues
This patch does the following:

1: sets initial default format during probe.
2: removes spurious messages.
3: optimize vpif_s/try_fmt_vid_out code.

Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-17 12:04:44 -03:00
Lad, Prabhakar
4015bef649 [media] media: davinci: vpif_capture: drop unneeded module params
Remove bogus 'numbuffers' and 'bufsize' module options. The number of buffers and
buffer sizes are determined by VIDIOC_REQBUFS and VIDIOC_S_FMT and the amount of
available memory (in the case of the MMAP stream I/O mode) and not by module
options.

These module params are a left-over from the original montavista code that used
these parameters to pre-allocate the memory needed for the buffers. The code that
allocated those buffers was never upstreamed since by the time the drivers were
added to the kernel the TI cmem module could be used in combination with the
USERPTR mode to reserve and pass physically contiguous memory pointers around.

These days of course CMA is used instead of cmem.

This patch removes these module options altogether since they no longer do what
they originally were designed for. They should never have been part of the
upstreamed code in the first place, so they've been pointless ever since
2.6.32 when this driver first appeared in the mainline kernel.

Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-17 12:04:44 -03:00
Mauro Carvalho Chehab
619c027da0 [media] drxd: get rid of EXPORT_SYMBOL(drxd_config_i2c)
This symbol is not used externally. Get rid of it.

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-17 12:04:38 -03:00
Laurent Pinchart
e51daefc22 [media] v4l: vsp1: Remove the unneeded vsp1_video_buffer video field
The field is assigned but never read, remove it.

This fixes a bug caused by the struct vb2_buffer field not being be the
very first field of the vsp1_video_buffer buffer structure as required
by videobuf2.

Cc: stable@vger.kernel.org
Reported-by: Takanari Hayama <taki@igel.co.jp>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-17 12:04:05 -03:00
Linus Torvalds
338c09a94b Merge branch 'topic/omap3isp' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull OMAP3 updates from Mauro Carvalho Chehab:
 "Some driver improvements on OMAP3.  This series depend on some iommu
  patches already merged"

* 'topic/omap3isp' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (26 commits)
  [media] omap3isp: Rename isp_buffer isp_addr field to dma
  [media] omap3isp: Move to videobuf2
  [media] v4l: vb2: Add a function to discard all DONE buffers
  [media] omap3isp: Cancel all queued buffers when stopping the video stream
  [media] omap3isp: Move buffer irqlist to isp_buffer structure
  [media] omap3isp: Move queue irqlock to isp_video structure
  [media] omap3isp: Move queue mutex to isp_video structure
  [media] omap3isp: queue: Don't build scatterlist for kernel buffer
  [media] omap3isp: Use the ARM DMA IOMMU-aware operations
  [media] omap3isp: queue: Use sg_alloc_table_from_pages()
  [media] omap3isp: queue: Map PFNMAP buffers to device
  [media] omap3isp: queue: Fix the dma_map_sg() return value check
  [media] omap3isp: queue: Allocate kernel buffers with dma_alloc_coherent
  [media] omap3isp: queue: Inline the ispmmu_v(un)map functions
  [media] omap3isp: queue: Merge the prepare and sglist functions
  [media] omap3isp: queue: Use sg_table structure
  [media] omap3isp: queue: Move IOMMU handling code to the queue
  [media] omap3isp: video: Set the buffer bytesused field at completion time
  [media] omap3isp: ccdc: Use the DMA API for FPC
  [media] omap3isp: ccdc: Use the DMA API for LSC
  ...
2014-06-12 23:04:28 -07:00
Linus Torvalds
0bb4646241 Merge branches 'topic/vsp1' and 'topic/adv76xx' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media into next
Pull updates and DT support for media engines from Mauro Carvalho Chehab.

For Analog Devices ADV7604 and the Renesas VSP1 video processing engines.

* 'topic/vsp1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  [media] v4l: vsp1: Add DT support
  [media] v4l: vsp1: Add DT bindings documentation
  [media] v4l: vsp1: Add BRU support
  [media] v4l: vsp1: Support multi-input entities
  [media] v4l: vsp1: uds: Enable scaling of alpha layer
  [media] v4l: vsp1: Remove unexisting rt clocks

* 'topic/adv76xx' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (21 commits)
  [media] adv7604: Add LLC polarity configuration
  [media] adv7604: Set HPD GPIO direction to output
  [media] adv7604: Add endpoint properties to DT bindings
  [media] adv7604: Add DT support
  [media] adv7604: Specify the default input through platform data
  [media] adv7604: Support hot-plug detect control through a GPIO
  [media] adv7604: Sort headers alphabetically
  [media] adv7604: Replace *_and_or() functions with *_clr_set()
  [media] adv7604: Store I2C addresses and clients in arrays
  [media] adv7604: Inline the to_sd function
  [media] v4l: subdev: Remove deprecated video-level DV timings operations
  [media] adv7604: Remove deprecated video-level DV timings operations
  [media] adv7604: Add pad-level DV timings support
  [media] adv7604: Make output format configurable through pad format operations
  [media] adv7604: Add sink pads
  [media] adv7604: Remove subdev control handlers
  [media] adv7604: Add adv7611 support
  [media] adv7604: Cache register contents when reading multiple bits
  [media] adv7604: Add 16-bit read functions for CP and HDMI
  [media] adv7604: Don't put info string arrays on the stack
  ...
2014-06-06 11:58:47 -07:00
Linus Torvalds
aaeb255433 Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media into next
Pull media updates from Mauro Carvalho Chehab:
 "This contains:
   - a new frontend/tuner driver set for si2168 and sa2157
   - Videobuf 2 core now supports DVB too
   - A new gspca sub-driver (dtcs033)
   - saa7134 is now converted to use videobuf2
   - add support for 4K timings
   - several other driver fixes and improvements

  PS.  This pull request is shorter than usual, partly because I have
  some other patches on topic branches that I'll be sending you later
  this week"

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (286 commits)
  [media] au0828-dvb: restore its permission to 644
  [media] xc5000: delay tuner sleep to 5 seconds
  [media] xc5000: Don't use whitespace before tabs
  [media] xc5000: fix CamelCase
  [media] xc5000: Don't wrap msleep()
  [media] xc5000: get rid of positive error codes
  [media] au0828: reset streaming when a new frequency is set
  [media] au0828: Improve debug messages for urb_completion
  [media] au0828: Cancel stream-restart operation if frontend is disconnected
  [media] dib0700: fix RC support on Hauppauge Nova-TD
  [media] USB: as102_usb_drv.c: Remove useless return variables
  [media] v4l: Fix documentation of V4L2_PIX_FMT_H264_MVC and VP8 pixel formats
  [media] m5mols: Replace missing header
  [media] staging: lirc: Fix sparse warnings
  [media] fix mceusb endpoint type identification/handling
  [media] az6027: Added the PID for a new revision of the Elgato EyeTV Sat DVB-S Tuner
  [media] DocBook media: fix typo
  [media] adv7604: Add missing include to linux/types.h
  [media] v4l: Validate fields in the core code for subdev EDID ioctls
  [media] v4l: Add support for DV timings ioctls on subdev nodes
  ...
2014-06-04 14:24:30 -07:00
Mauro Carvalho Chehab
a2668e10d7 [media] au0828-dvb: restore its permission to 644
A previous patch mistakenly changed the file permission to 755.
Restore it to 644.

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-04 15:19:36 -03:00
Linus Torvalds
776edb5931 Merge branch 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next
Pull core locking updates from Ingo Molnar:
 "The main changes in this cycle were:

   - reduced/streamlined smp_mb__*() interface that allows more usecases
     and makes the existing ones less buggy, especially in rarer
     architectures

   - add rwsem implementation comments

   - bump up lockdep limits"

* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
  rwsem: Add comments to explain the meaning of the rwsem's count field
  lockdep: Increase static allocations
  arch: Mass conversion of smp_mb__*()
  arch,doc: Convert smp_mb__*()
  arch,xtensa: Convert smp_mb__*()
  arch,x86: Convert smp_mb__*()
  arch,tile: Convert smp_mb__*()
  arch,sparc: Convert smp_mb__*()
  arch,sh: Convert smp_mb__*()
  arch,score: Convert smp_mb__*()
  arch,s390: Convert smp_mb__*()
  arch,powerpc: Convert smp_mb__*()
  arch,parisc: Convert smp_mb__*()
  arch,openrisc: Convert smp_mb__*()
  arch,mn10300: Convert smp_mb__*()
  arch,mips: Convert smp_mb__*()
  arch,metag: Convert smp_mb__*()
  arch,m68k: Convert smp_mb__*()
  arch,m32r: Convert smp_mb__*()
  arch,ia64: Convert smp_mb__*()
  ...
2014-06-03 12:57:53 -07:00
Linus Torvalds
e5c4ecdc55 USB driver patches for 3.16-rc1
Here is the big USB driver pull request for 3.16-rc1.
 
 Nothing huge here, but lots of little things in the USB core, and in
 lots of drivers.  Hopefully the USB power management will be work better
 now that it has been reworked to do per-port power control dynamically.
 There's also a raft of gadget driver updates and fixes, CONFIG_USB_DEBUG
 is finally gone now that everything has been converted over to the
 dynamic debug inteface, the last hold-out drivers were cleaned up and
 the config option removed.  There were also other minor things all
 through the drivers/usb/ tree, the shortlog shows this pretty well.
 
 All have been in linux-next, including the very last patch, which came
 from linux-next to fix a build issue on some platforms.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iEYEABECAAYFAlONYEMACgkQMUfUDdst+ynxvgCggMQBhN5icth8Y5hFglNNaISN
 c4AAoMHR2kb62U1plylLbPnboQTjfcl0
 =fG6y
 -----END PGP SIGNATURE-----

Merge tag 'usb-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb into next

Pull USB driver updates from Greg KH:
 "Here is the big USB driver pull request for 3.16-rc1.

  Nothing huge here, but lots of little things in the USB core, and in
  lots of drivers.  Hopefully the USB power management will be work
  better now that it has been reworked to do per-port power control
  dynamically.  There's also a raft of gadget driver updates and fixes,
  CONFIG_USB_DEBUG is finally gone now that everything has been
  converted over to the dynamic debug inteface, the last hold-out
  drivers were cleaned up and the config option removed.  There were
  also other minor things all through the drivers/usb/ tree, the
  shortlog shows this pretty well.

  All have been in linux-next, including the very last patch, which came
  from linux-next to fix a build issue on some platforms"

* tag 'usb-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (314 commits)
  usb: hub_handle_remote_wakeup() only exists for CONFIG_PM=y
  USB: orinoco_usb: remove CONFIG_USB_DEBUG support
  USB: media: lirc: igorplugusb: remove CONFIG_USB_DEBUG support
  USB: media: streamzap: remove CONFIG_USB_DEBUG
  USB: media: redrat3: remove CONFIG_USB_DEBUG usage
  USB: media: redrat3: remove unneeded tracing macro
  usb: qcserial: add additional Sierra Wireless QMI devices
  usb: host: max3421-hcd: Use module_spi_driver
  usb: host: max3421-hcd: Allow platform-data to specify Vbus polarity
  usb: host: max3421-hcd: fix "spi_rd8" uses dynamic stack allocation warning
  usb: host: max3421-hcd: Fix missing unlock in max3421_urb_enqueue()
  usb: qcserial: add Netgear AirCard 341U
  Documentation: dt-bindings: update xhci-platform DT binding for R-Car H2 and M2
  usb: host: xhci-plat: add xhci_plat_start()
  usb: host: max3421-hcd: Fix potential NULL urb dereference
  Revert "usb: gadget: net2280: Add support for PLX USB338X"
  USB: usbip: remove CONFIG_USB_DEBUG reference
  USB: remove CONFIG_USB_DEBUG from defconfig files
  usb: resume child device when port is powered on
  usb: hub_handle_remote_wakeup() depends on CONFIG_PM_RUNTIME=y
  ...
2014-06-03 09:11:20 -07:00
Greg Kroah-Hartman
834b4d5136 USB: media: streamzap: remove CONFIG_USB_DEBUG
It wasn't even being used for anything, so remove the test for the
config option (as the config option isn't present anymore), and remove
the unused module parameter "debug" so as to not confuse anyone.

Cc: Mauro Carvalho Chehab <m.chehab@samsung.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: "Antti Seppälä" <a.seppala@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-29 11:22:47 -07:00
Greg Kroah-Hartman
3228bf81e0 USB: media: redrat3: remove CONFIG_USB_DEBUG usage
Use the dev_dbg dynamic infrastructure instead of rolling our own custom
debug logic.  This is needed as CONFIG_USB_DEBUG is now gone.

Cc: Mauro Carvalho Chehab <m.chehab@samsung.com>
Cc: Sean Young <sean@mess.org>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Jonathan McCrohan <jmccrohan@gmail.com>
Cc: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-29 11:22:46 -07:00
Greg Kroah-Hartman
a36d5b618e USB: media: redrat3: remove unneeded tracing macro
The rr3_ftr function duplicates the in-kernel tracing logic, so remove
it.

This is step 1 of of removing the CONFIG_USB_DEBUG depandancy in this
driver.

Cc: Mauro Carvalho Chehab <m.chehab@samsung.com>
Cc: Sean Young <sean@mess.org>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Jonathan McCrohan <jmccrohan@gmail.com>
Cc: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-29 11:22:46 -07:00
Mauro Carvalho Chehab
f7a27ff1fb [media] xc5000: delay tuner sleep to 5 seconds
Some drivers, like au0828 are very sensitive to tuner sleep and may
break if the sleep happens too fast. Also, by keeping the tuner alive
for a while could speedup tuning process during channel scan. So,
change the logic to delay the actual sleep to 5 seconds after its
command.

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 17:50:16 -03:00
Mauro Carvalho Chehab
5015c27b60 [media] xc5000: Don't use whitespace before tabs
WARNING: please, no space before tabs
+#define XC_PRODUCT_ID_FW_LOADED ^I0x1388$

WARNING: please, no space before tabs
+#define DK_SECAM_A2LDK3 ^I13$

WARNING: please, no space before tabs
+#define DK_SECAM_A2MONO ^I14$

WARNING: please, no space before tabs
+#define FM_RADIO_INPUT2 ^I21$

WARNING: please, no space before tabs
+#define FM_RADIO_INPUT1 ^I22$

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 17:50:15 -03:00
Mauro Carvalho Chehab
303ddd9286 [media] xc5000: fix CamelCase
There are several CamelCase non-codingstyle compliances here.

Fix them.

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 17:50:14 -03:00
Mauro Carvalho Chehab
e5bf4a1107 [media] xc5000: Don't wrap msleep()
There's absolutely no reason to wrap msleep() call here.
Just rename all occurences of xc_wait() with msleep() and
remove the wrapper function.

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 17:50:14 -03:00
Mauro Carvalho Chehab
859ae7f012 [media] xc5000: get rid of positive error codes
Errors should also be negative and should follow the Kernel
standards.

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 17:50:13 -03:00
Mauro Carvalho Chehab
f6fef86341 [media] au0828: reset streaming when a new frequency is set
As reported by Trevor, doing several opening/streaming/closing
operations to the demux causes it to fail.

I was able to simulate this bug too. I also noticed that,
sometimes, changing channels with au0828, the same thing
happens.

Most of the issues seem to be due to some hardware bug, that
causes the device to not fill all the URBs allocated. When
the bug happens, the only known fix is to either replug the
device, or to send an USB reset to it.

There's also a hack a the au0828 driver that starts a thread
that tries to reset the device when a package doesn't start
with a sync.

One of the culpits for this bad hardware behavior seem to be
caused by the lack of stopping and restarting the stream every
time a new channel is set.

This patch warrants that the stream will be properly reset
every time the set_frontend callback is called, partially
solving the problem.

A complete fix, however, would also need to check the PM
conditions for the tuner and demux.

Reported-by: Trevor Graffa <tlgraffa@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 17:50:02 -03:00
Mauro Carvalho Chehab
c35fbd03ae [media] au0828: Improve debug messages for urb_completion
Sometimes, it helps to know how much data was received by
urb_completion. Add that information to the optional debug
log.

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 17:46:36 -03:00
Changbing Xiong
d9e091fe71 [media] au0828: Cancel stream-restart operation if frontend is disconnected
If the tuner is already disconnected, It is meaningless to go on doing the
stream-restart operation, It is better to cancel this operation.

Signed-off-by: Changbing Xiong <cb.xiong@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 17:45:55 -03:00
Mauro Carvalho Chehab
c4018fa2e4 [media] dib0700: fix RC support on Hauppauge Nova-TD
The RC support o Nova-TD is broken, as the RC endpoint there
is an interrupt endpoint.

That produces an ugly calltrace at the Kernel logs:

	WARNING: CPU: 2 PID: 56 at drivers/usb/core/urb.c:450 usb_submit_urb+0x1fd/0x5c0()
	usb 1-1.2: BOGUS urb xfer, pipe 3 != type 1
	Modules linked in: rc_dib0700_rc5(OF) dvb_usb_dib0700(OF) dib9000(OF) dib8000(OF) dib7000m(OF) dib0090(OF) dib0070(OF) dib7000p(OF) dib3000mc(OF) dibx000_common(OF) dvb_usb(OF) rc_core(OF) snd_usb_audio snd_usbmidi_lib snd_hwdep snd_rawmidi snd_seq snd_seq_device snd_pcm snd_timer snd soundcore bnep bluetooth 6lowpan_iphc rfkill au0828(OF) xc5000(OF) au8522_dig(OF) au8522_common(OF) tveeprom(OF) dvb_core(OF) nouveau i915 mxm_wmi ttm i2c_algo_bit drm_kms_helper drm r8169 mii i2c_core video wmi [last unloaded: au0828]
	CPU: 2 PID: 56 Comm: khubd Tainted: GF          O 3.14.2-200.fc20.x86_64 #1
	Hardware name: SAMSUNG ELECTRONICS CO., LTD. 550P5C/550P7C/SAMSUNG_NP1234567890, BIOS P05ABI.016.130917.dg 09/17/2013
	 0000000000000000 00000000610866bc ffff880223703860 ffffffff816eec92
	 ffff8802237038a8 ffff880223703898 ffffffff8108a1bd ffff8800916a2180
	 ffff8801d5b16000 0000000000000003 0000000000000003 0000000000000020
	Call Trace:
	 [<ffffffff816eec92>] dump_stack+0x45/0x56
	 [<ffffffff8108a1bd>] warn_slowpath_common+0x7d/0xa0
	 [<ffffffff8108a23c>] warn_slowpath_fmt+0x5c/0x80
	 [<ffffffff814e3ebd>] usb_submit_urb+0x1fd/0x5c0
	 [<ffffffffa0445925>] dib0700_rc_setup+0xb5/0x120 [dvb_usb_dib0700]
	 [<ffffffffa0445a58>] dib0700_probe+0xc8/0x130 [dvb_usb_dib0700]
	...

Fix it by detecting if the endpoint is bulk or interrupt.

Tested with both Hauppauge Nova-TD model 52009 (interrupt) and with a
		 Prolink Pixelview SBTVD model PV-D231U (bulk).

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 17:44:19 -03:00
Laurent Pinchart
39ad9bbe5c [media] m5mols: Replace missing header
The include/media/s5p_fimc.h header has been removed in commit
49b2f4c56f ("exynos4-is: Remove support
for non-dt platforms"). This broke compilation of the m5mols driver.

Include the include/media/exynos-fimc.h header instead, which contains
the S5P_FIMC_TX_END_NOTIFY definition required by the driver.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 17:00:01 -03:00
Matt DeVillier
0cacb46ace [media] fix mceusb endpoint type identification/handling
Change the I/O endpoint handling of the mceusb driver to respect the endpoint
type reported by device (bulk/interrupt), rather than treating all endpoints
as type interrupt, which breaks devices using bulk endpoints when connected
to a xhci controller.  Accordingly, change the function calls to initialize
an endpoint's transfer pipe and urb handlers to use the correct function based
on the endpoint type.

[m.chehab@samsung.com: Fix merge conflicts and compilation breakage]
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 15:49:35 -03:00
Manuel Schönlaub
44f83144ca [media] az6027: Added the PID for a new revision of the Elgato EyeTV Sat DVB-S Tuner
There is another clone of AZ6027. This patch adds the relevant PID.

Signed-off-by: Manuel Schönlaub <manuel.schoenlaub@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 15:49:35 -03:00
Laurent Pinchart
1b5ab8755e [media] adv7604: Add LLC polarity configuration
Add an inv_llc_pol field to platform data to control the clock polarity.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 13:10:16 -03:00
Laurent Pinchart
9b2c38239d [media] adv7604: Set HPD GPIO direction to output
The HPD GPIO is used as an output but its direction is never set. Fix
it.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 13:09:13 -03:00
Laurent Pinchart
6fa88045ef [media] adv7604: Add endpoint properties to DT bindings
Add support for the hsync-active, vsync-active and pclk-sample
properties to the DT bindings and control BT.656 mode implicitly.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 13:08:51 -03:00
Laurent Pinchart
f82f313e97 [media] adv7604: Add DT support
Parse the device tree node to populate platform data. Only the ADV7611
is currently support with DT.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 13:04:00 -03:00
Laurent Pinchart
5ef54b5955 [media] adv7604: Specify the default input through platform data
And set input routing when initializing the device.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 13:03:02 -03:00
Laurent Pinchart
e9d50e9e70 [media] adv7604: Support hot-plug detect control through a GPIO
Add support for optional GPIO-controlled HPD pins in addition to the
ADV7604-specific hotplug notifier.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 13:02:45 -03:00
Laurent Pinchart
c72a53ce05 [media] adv7604: Sort headers alphabetically
This helps locating duplicates and inserting new headers.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 13:02:23 -03:00
Laurent Pinchart
22d97e561d [media] adv7604: Replace *_and_or() functions with *_clr_set()
The *_and_or() functions take an 'and' bitmask to be ANDed with the
register value before ORing it with th 'or' bitmask. As the functions
are used to mask and set bits selectively, this requires the caller to
invert the 'and' bitmask and is thus error prone. Replace those
functions with a *_clr_set() variant that takes a mask of bits to be
cleared instead of a mask of bits to be kept.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 13:02:05 -03:00
Laurent Pinchart
05cacb1767 [media] adv7604: Store I2C addresses and clients in arrays
This allows replacing duplicate code blocks by loops over the arrays.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 13:00:21 -03:00
Laurent Pinchart
c269887c2d [media] adv7604: Inline the to_sd function
This one line function is called in a single location. Inline it.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 12:59:29 -03:00
Laurent Pinchart
7515e09693 [media] adv7604: Remove deprecated video-level DV timings operations
The video enum_dv_timings and dv_timings_cap operations are deprecated
and unused. Remove them.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 12:58:46 -03:00
Laurent Pinchart
afec55992e [media] adv7604: Add pad-level DV timings support
The video enum_dv_timings and dv_timings_cap operations are deprecated.
Implement the pad-level version of those operations to prepare for the
removal of the video version.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 12:58:27 -03:00
Laurent Pinchart
539b33b059 [media] adv7604: Make output format configurable through pad format operations
Replace the dummy video format operations by pad format operations that
configure the output format.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Tested-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 12:57:26 -03:00
Laurent Pinchart
c784b1e2ec [media] adv7604: Add sink pads
The ADV7604 has sink pads for its HDMI and analog inputs. Report them.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 12:56:15 -03:00
Laurent Pinchart
454378923a [media] adv7604: Remove subdev control handlers
Control operations are handled by the control framework and the subdev
control handlers are never called directly. Remove them.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 12:55:37 -03:00
Lars-Peter Clausen
d42010a1d2 [media] adv7604: Add adv7611 support
This patch adds support for the Analog Devices ADV7611 HDMI receiver.
The adv7611 is quite similar to the adv7604. It has only one instead of four
HDMI inputs and no analog frontend though. Also some register bits have been
shuffled around, but large parts of their register maps are compatible.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 12:55:16 -03:00
Laurent Pinchart
4a2ccdd257 [media] adv7604: Cache register contents when reading multiple bits
When extracting multiple bits from a single register read the register
once and extract the bits on the read value.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 12:52:33 -03:00
Laurent Pinchart
51182a945c [media] adv7604: Add 16-bit read functions for CP and HDMI
16-bit registers are read through two 8-bit read operations. Factorize
that common pattern into 16-bit read accessors to simplify the code.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 12:52:02 -03:00
Lars-Peter Clausen
f216ccb3d9 [media] adv7604: Don't put info string arrays on the stack
We do not want to modify the info string arrays ever, so no need to
waste stack space for them. While we are at it also make them const.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 12:51:35 -03:00
Lars-Peter Clausen
bedc3939dc [media] adv7604: Add support for asynchronous probing
Register the device with the v4l2 asynchronous probing framework to
support asynchronous instantiation systems such as DT.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 12:50:10 -03:00
Laurent Pinchart
f2e9084779 [media] v4l: Validate fields in the core code for subdev EDID ioctls
The subdev EDID ioctls receive a pad field that must reference an
existing pad and an EDID field that must point to a buffer. Validate
both fields in the core code instead of duplicating validation in all
drivers.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 12:48:33 -03:00
Laurent Pinchart
9cfd65e809 [media] v4l: Add support for DV timings ioctls on subdev nodes
Validate the pad field in the core code whenever specified.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 12:47:55 -03:00
Laurent Pinchart
96278922f6 [media] tvp7002: Remove deprecated video-level DV timings operations
The video enum_dv_timings and dv_timings_cap operations are deprecated
and unused. Remove them.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 12:46:47 -03:00
Laurent Pinchart
105534054f [media] ths8200: Remove deprecated video-level DV timings operations
The video enum_dv_timings and dv_timings_cap operations are deprecated
and unused. Remove them.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 12:46:18 -03:00
Laurent Pinchart
e53a59dc55 [media] s5p-tv: hdmiphy: Remove deprecated video-level DV timings operation
The video enum_dv_timings operation is deprecated and unused. Remove it.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 12:45:52 -03:00
Laurent Pinchart
9e82440934 [media] s5p-tv: hdmi: Remove deprecated video-level DV timings operations
The video enum_dv_timings and dv_timings_cap operations are deprecated
and unused. Remove them.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 12:45:20 -03:00
Laurent Pinchart
0dd3e36c8c [media] adv7842: Remove deprecated video-level DV timings operations
The video enum_dv_timings and dv_timings_cap operations are deprecated
and unused. Remove them.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 12:44:39 -03:00
Laurent Pinchart
8f8d2fecd9 [media] adv7511: Remove deprecated video-level DV timings operations
The video enum_dv_timings and dv_timings_cap operations are deprecated
and unused. Remove them.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 12:43:52 -03:00
Laurent Pinchart
8846e93992 [media] ad9389b: Remove deprecated video-level DV timings operations
The video enum_dv_timings and dv_timings_cap operations are deprecated
and unused. Remove them.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 12:43:39 -03:00
Laurent Pinchart
78dc47bb78 [media] s5p-tv: mixer: Switch to pad-level DV operations
The video-level enum_dv_timings and dv_timings_cap operations are
deprecated in favor of the pad-level versions. All subdev drivers
implement the pad-level versions, switch to them.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 12:43:25 -03:00
Laurent Pinchart
10d2146dbe [media] media: davinci: vpif: Switch to pad-level DV operations
The video-level enum_dv_timings and dv_timings_cap operations are
deprecated in favor of the pad-level versions. All subdev drivers
implement the pad-level versions, switch to them.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 12:42:56 -03:00
Laurent Pinchart
f1f8e4348d [media] media: bfin_capture: Switch to pad-level DV operations
The video-level enum_dv_timings and dv_timings_cap operations are
deprecated in favor of the pad-level versions. All subdev drivers
implement the pad-level versions, switch to them.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Scott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 12:42:37 -03:00
Laurent Pinchart
307d3bd497 [media] tvp7002: Add pad-level DV timings operations
The video enum_dv_timings operation is deprecated. Implement the
pad-level version of the operation to prepare for the removal of the
video version.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 12:42:10 -03:00
Laurent Pinchart
553bca82ed [media] ths8200: Add pad-level DV timings operations
The video enum_dv_timings and dv_timings_cap operations are deprecated.
Implement the pad-level version of those operations to prepare for the
removal of the video version.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 12:41:55 -03:00
Laurent Pinchart
1579a9d3f0 [media] s5p-tv: hdmiphy: Add pad-level DV timings operations
The video enum_dv_timings operation is deprecated. Implement the
pad-level version of the operation to prepare for the removal of the
video version.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 12:41:18 -03:00
Laurent Pinchart
5908e3ad19 [media] s5p-tv: hdmi: Add pad-level DV timings operations
The video enum_dv_timings and dv_timings_cap operations are deprecated.
Implement the pad-level version of those operations to prepare for the
removal of the video version.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 12:41:00 -03:00
Laurent Pinchart
c916194caf [media] adv7842: Add pad-level DV timings operations
The video enum_dv_timings and dv_timings_cap operations are deprecated.
Implement the pad-level version of those operations to prepare for the
removal of the video version.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 12:40:26 -03:00
Laurent Pinchart
9646171fac [media] adv7511: Add pad-level DV timings operations
The video enum_dv_timings and dv_timings_cap operations are deprecated.
Implement the pad-level version of those operations to prepare for the
removal of the video version.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 12:40:04 -03:00
Laurent Pinchart
22c25b4861 [media] ad9389b: Add pad-level DV timings operations
The video enum_dv_timings and dv_timings_cap operations are deprecated.
Implement the pad-level version of those operations to prepare for the
removal of the video version.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 12:38:59 -03:00
Laurent Pinchart
21d8582d48 [media] omap3isp: Rename isp_buffer isp_addr field to dma
No functional changes.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 11:40:09 -03:00
Laurent Pinchart
fbac1400bd [media] omap3isp: Move to videobuf2
Replace the custom buffers queue implementation with a videobuf2 queue.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 11:38:53 -03:00
Laurent Pinchart
34ea4d4417 [media] v4l: vb2: Add a function to discard all DONE buffers
When suspending a device while a video stream is active all buffers
marked as done but not dequeued yet will be kept across suspend and
given back to userspace after resume. This will result in outdated
buffers being dequeued.

Introduce a new vb2 function to mark all done buffers as erroneous
instead, to be used by drivers at resume time.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 11:37:49 -03:00
Laurent Pinchart
08344492b3 [media] omap3isp: Cancel all queued buffers when stopping the video stream
When stopping a video stream the driver waits for ongoing DMA opeations
to complete for the currently active buffer, but doesn't release the
non-active queued buffers. This isn't a problem in most cases as the
video device is usually closed after the stream is stopped, which will
release all the buffers. However the problem would generate a warning
when switching to videobuf2. Fix it by cancelling all buffers after DMA
operations have completed.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 11:34:03 -03:00
Laurent Pinchart
eb2c00d201 [media] omap3isp: Move buffer irqlist to isp_buffer structure
This prepares for the move to videobuf2.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 11:33:27 -03:00
Laurent Pinchart
e8feb876d4 [media] omap3isp: Move queue irqlock to isp_video structure
This prepares for the move to videobuf2.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 11:32:08 -03:00
Laurent Pinchart
988d54c4b9 [media] omap3isp: Move queue mutex to isp_video structure
This prepares for the move to videobuf2.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 11:19:48 -03:00
Laurent Pinchart
1e345d4ab4 [media] omap3isp: queue: Don't build scatterlist for kernel buffer
The scatterlist is not needed for those buffers, don't build it.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 11:19:08 -03:00
Laurent Pinchart
2a0a5472af [media] omap3isp: Use the ARM DMA IOMMU-aware operations
Attach an ARM DMA I/O virtual address space to the ISP device. This
switches to the IOMMU-aware ARM DMA backend, we can thus remove the
explicit calls to the OMAP IOMMU map and unmap functions.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 11:18:42 -03:00
Laurent Pinchart
9a8c7fffa2 [media] omap3isp: queue: Use sg_alloc_table_from_pages()
Replace the custom implementation with a call to the scatterlist helper
function.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 11:17:37 -03:00
Laurent Pinchart
49ac3695d0 [media] omap3isp: queue: Map PFNMAP buffers to device
Userspace PFNMAP buffers need to be mapped to the device like the
userspace non-PFNMAP buffers in order for the DMA mapping implementation
to create IOMMU mappings when we'll switch to the IOMMU-aware DMA
mapping backend.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 11:17:14 -03:00
Laurent Pinchart
b8d642826d [media] omap3isp: queue: Fix the dma_map_sg() return value check
dma_map_sg() can merge sglist entries, and can thus return a number of
mapped entries different than the original value. Don't consider this as
an error.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 11:16:18 -03:00
Laurent Pinchart
7f5036d059 [media] omap3isp: queue: Allocate kernel buffers with dma_alloc_coherent
And retrieve the related sg table using dma_get_sgtable().

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 11:15:47 -03:00
Laurent Pinchart
d13f19f2ca [media] omap3isp: queue: Inline the ispmmu_v(un)map functions
The ispmmu_vmap() and ispmmu_vunmap() functions are just wrappers around
omap_iommu_vmap() and omap_iommu_vunmap(). Inline them.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 11:15:08 -03:00
Laurent Pinchart
8271601aca [media] omap3isp: queue: Merge the prepare and sglist functions
In preparation for the switch to the DMA API merge the two functions
that handle buffer preparation for the USERPTR cases (both page-backed
and non page-backed memory).

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 11:14:43 -03:00
Laurent Pinchart
73c1ea496c [media] omap3isp: queue: Use sg_table structure
Replace the sglen and sglist fields stored in the buffer structure with
an sg_table. This allows using the sg table allocation helper function.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 11:14:02 -03:00
Laurent Pinchart
9000427aec [media] omap3isp: queue: Move IOMMU handling code to the queue
As a preparation for the switch from the OMAP IOMMU API to the DMA API
move all IOMMU handling code from the video node implementation to the
buffers queue implementation.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 11:13:17 -03:00