None of these files are actually using any __init type directives
and hence don't need to include <linux/init.h>. Most are just a
left over from __devinit and __cpuinit removal, or simply due to
code getting copied from one driver to the next.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes the checkpatch.pl warning "do not add new typedefs"
and changes all source files that use that typedef. Also lines were
shortened to 80 characters to do away with the checkpatch.pl warning
"line over 80 characters" generated due to replacement of the
hfa384x_bytestr_t by struct hfa384x_bytestr in prism2mgmt.c,
prism2mgmt.h, prism2mib.c, prism2sta.c.
Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch replaces calls to kmalloc that are followed
by memcpy with calls to kmemdup.
This patch was found using coccicheck with api/memdup.cocci,
with memdup.cocci script slightly altered in the following way:
@depends on patch@
expression from,to,size,flag;
position p != {r1.p,r2.p};
@@
- to = \(kmalloc@p\|kzalloc@p\)(size,flag);
+ to = kmemdup(from,size,flag);
- memcpy(to, from, size);
Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
I'm not sure where these results come from, but it can't hurt to
add a sanity check the array offset. The .results[] array on the
next line has HFA384x_CHINFORESULT_MAX (16) elements.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This function is ugly because it hits against the 80 character
limit. This patch does several things to clean it up.
1) Introduces "result" instead of inf->info.chinforesult.result[n].
2) Reverses the ".scanchannels & (1 << i)" so everthing can be
pulled in one indent level.
3) Use "chan" instead of "channel".
4) Tweaks the line breaks to the call to pr_debug().
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here's the big staging tree merge for 3.9-rc1
Lots of cleanups and updates for drivers all through the staging tree.
We are pretty much "code neutral" here, adding just about as many lines
as we removed.
All of these have been in linux-next for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iEUEABECAAYFAlEmW7QACgkQMUfUDdst+ymlIACXT5mv8Y5A/KJa+QLTNNsofI8u
aACgq9hNZxJzX6VQMLXUV8+2SILOqYo=
=5wIj
-----END PGP SIGNATURE-----
Merge tag 'staging-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging tree update from Greg Kroah-Hartman:
"Here's the big staging tree merge for 3.9-rc1
Lots of cleanups and updates for drivers all through the staging tree.
We are pretty much "code neutral" here, adding just about as many
lines as we removed.
All of these have been in linux-next for a while."
* tag 'staging-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (804 commits)
staging: comedi: vmk80xx: wait for URBs to complete
staging: comedi: drivers: addi-data: hwdrv_apci3200.c: Add a missing semicolon
staging: et131x: Update TODO list
staging: et131x: Remove assignment of skb->dev
staging: wlan-ng: hfa384x.h: fix for error reported by smatch
staging/zache checkpatch ERROR: spaces prohibited around that
staging/ozwpan: Mark read only parameters and structs as const
staging/ozwpan: Remove empty and unused function oz_cdev_heartbeat
staging/ozwpan: Mark local functions as static (fix sparse warnings)
staging/ozwpan: Add missing header includes
staging/usbip: Mark local functions as static (fix sparse warnings)
staging/xgifb: Remove duplicated code in loops.
staging/xgifb: Consolidate return paths
staging/xgifb: Remove code without effect
staging/xgifb: Remove unnecessary casts
staging/xgifb: Consolidate if/else if with identical code branches
staging: vt6656: replaced custom TRUE definition with true
staging: vt6656: replaced custom FALSE definition with false
staging: vt6656: replace custom BOOL definition with bool
staging/rtl8187se: Mark functions as static to silence sparse
...
Add the missing header include for 'struct urb' datatypes to avoid
potential build issues. Found using smatch.
Signed-off-by: Kumar Amit Mehta <gmate.amit@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
clang/scan-build complains that:
p80211netdev.c:451:6: warning: Branch condition evaluates to a garbage
value
if ((p80211_wep.data) && (p80211_wep.data != skb->data))
^~~~~~~~~~~~~~~~~
This can happen in p80211knetdev_hard_start_xmit if
- if (wlandev->state != WLAN_DEVICE_OPEN) evaluates to true.
the execution flow then continues at the 'failed' label where
p80211_wep.data is used without being initialized first.
-> Initialize the data field to NULL to fix this issue.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This prepares for using the spinlock instead of krefs
which is needed in the next patch to track the refs
of combined BSSes correctly.
Acked-by: Bing Zhao <bzhao@marvell.com> [mwifiex]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fix all 'please, no space before tabs' warning found by checkpatch.pl
Signed-off-by: Garrick He <garrickhe@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Enclose the macro into braces so that it can be closed by a semicolon
Signed-off-by: Sebastian Wankerl <sisewank@cip.cs.fau.de>
Signed-off-by: Sebastian Ehrenfels <qi50dube@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 2e254212 broke listing of available network names, since it
clamped the length of the returned SSID to WLAN_BSSID_LEN (6) instead of
WLAN_SSID_MAXLEN (32).
https://bugzilla.kernel.org/show_bug.cgi?id=52501
Signed-off-by: Tormod Volden <debian.tormod@gmail.com>
Cc: stable <stable@vger.kernel.org> # 3.4+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The commit c8442118 introduced a struct wireless_dev pointer
as a second argument of the function pointers set_tx_power
and get_tx_power. This patch adds the missing arguments for
the wlan-ng driver.
Sparse warnings:
drivers/staging/wlan-ng/cfg80211.c:735:25: warning:
incorrect type in initializer (incompatible argument 2
(different base types))
drivers/staging/wlan-ng/cfg80211.c:735:25:
expected int ( *set_tx_power )( ... )
drivers/staging/wlan-ng/cfg80211.c:735:25:
got int ( extern [toplevel] *<noident> )( ... )
drivers/staging/wlan-ng/cfg80211.c:736:25: warning:
incorrect type in initializer (incompatible argument 2
(different base types))
drivers/staging/wlan-ng/cfg80211.c:736:25:
expected int ( *get_tx_power )( ... )
drivers/staging/wlan-ng/cfg80211.c:736:25:
got int ( extern [toplevel] *<noident> )( ... )
drivers/staging/wlan-ng/cfg80211.c:735:2: warning:
initialization from incompatible pointer type [enabled by default]
drivers/staging/wlan-ng/cfg80211.c:735:2: warning:
(near initialization for ‘prism2_usb_cfg_ops.set_tx_power’)
[enabled by default]
drivers/staging/wlan-ng/cfg80211.c:736:2: warning:
initialization from incompatible pointer type [enabled by default]
drivers/staging/wlan-ng/cfg80211.c:736:2: warning:
(near initialization for ‘prism2_usb_cfg_ops.get_tx_power’)
[enabled by default]
Signed-off-by: Emil Goode <emilgoode@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
checkpatch.pl throws error message for the current code. This patch fixes
coding style issue.
Signed-off-by: Kumar Amit Mehta <gmate.amit@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Smatch is warning about a dereference before we check for NULL.
This patch moves the dereference to after the NULL check.
Smatch warning:
drivers/staging/wlan-ng/cfg80211.c:345 prism2_scan() warn:
variable dereferenced before check 'request' (see line 332)
Signed-off-by: Emil Goode <emilgoode@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This pulls in the staging tree fixes in 3.6-rc6 into our branch to resolve the
merge issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
this removes the remaining return which the function actually
wants to return, for that it used goto failed and failed lable
have the return statement at the end of function, which is all
unnecessary, remove this and make the function return at the
places where it does the goto failed
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
this file is having all unnecessary return statements at the end of functions
which return void, remove all of them.
some of the functions still uses the return for having the goto end,
which the label end defined at the end of the function which returns
void, this will be cleaned up in next change
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
else is not required as such we can do with just with a single if
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
this is because this function does a deinit job and most of the
deinit functions are expected to return void. Also this function
doesn't fail anywhere..
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
the function p80211netdev_rx doesnt' need a return at the end
and also remove some new lines
the function p80211knetdev_set_mac_address doesn't need the result
variable assigned as it gets a return from p80211req_dorequest function
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
we dont need i to just return the status of register_netdev
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
the function prism2sta_commsqual_defer defines a goto done lable, which just
jumps to end of function, which we can achieve with out it
the hfa384x_drvr_getconfig doesn't need the result variable, we can
remove and just return the function
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
these functions doesn't need return at the end of the function
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
this function always returning 0, there are no callers that checks
the return of this function, make this function return void
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
the switch case doesn't have a break statement of DIDmsg_dot11req_mibget,
and DIDmsg_dot11req_mibset cases, and also cleanup the code to follow
the kernel coding way
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
default is redundant and remove it
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
goto done is not required and actually having goto done does
jumps the program to end of the function and calls return.
instead call return directly
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
goto done is not required and simple return is fine
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/staging/wlan-ng/prism2fw.c:240:5: warning: symbol 'prism2_fwapply' was not declared. Should it be static?
drivers/staging/wlan-ng/prism2fw.c:379:5: warning: symbol 'crcimage' was not declared. Should it be static?
drivers/staging/wlan-ng/prism2fw.c:443:6: warning: symbol 'free_chunks' was not declared. Should it be static?
drivers/staging/wlan-ng/prism2fw.c:465:6: warning: symbol 'free_srecs' was not declared. Should it be static?
drivers/staging/wlan-ng/prism2fw.c:492:5: warning: symbol 'mkimage' was not declared. Should it be static?
drivers/staging/wlan-ng/prism2fw.c:585:5: warning: symbol 'mkpdrlist' was not declared. Should it be static?
drivers/staging/wlan-ng/prism2fw.c:659:5: warning: symbol 'plugimage' was not declared. Should it be static?
drivers/staging/wlan-ng/prism2fw.c:767:5: warning: symbol 'read_cardpda' was not declared. Should it be static?
drivers/staging/wlan-ng/prism2fw.c:857:5: warning: symbol 'read_fwfile' was not declared. Should it be static?
drivers/staging/wlan-ng/prism2fw.c:981:5: warning: symbol 'writeimage' was not declared. Should it be static?
drivers/staging/wlan-ng/prism2fw.c:1133:5: warning: symbol 'validate_identity' was not declared. Should it be static?
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/staging/wlan-ng/prism2fw.c:127:18: warning: symbol 's3data' was not declared. Should it be static?
drivers/staging/wlan-ng/prism2fw.c:130:14: warning: symbol 'ns3plug' was not declared. Should it be static?
drivers/staging/wlan-ng/prism2fw.c:131:18: warning: symbol 's3plug' was not declared. Should it be static?
drivers/staging/wlan-ng/prism2fw.c:134:14: warning: symbol 'ns3crc' was not declared. Should it be static?
drivers/staging/wlan-ng/prism2fw.c:135:17: warning: symbol 's3crc' was not declared. Should it be static?
drivers/staging/wlan-ng/prism2fw.c:138:14: warning: symbol 'ns3info' was not declared. Should it be static?
drivers/staging/wlan-ng/prism2fw.c:139:18: warning: symbol 's3info' was not declared. Should it be static?
drivers/staging/wlan-ng/prism2fw.c:142:5: warning: symbol 'startaddr' was not declared. Should it be static?
drivers/staging/wlan-ng/prism2fw.c:145:14: warning: symbol 'nfchunks' was not declared. Should it be static?
drivers/staging/wlan-ng/prism2fw.c:146:17: warning: symbol 'fchunk' was not declared. Should it be static?
drivers/staging/wlan-ng/prism2fw.c:154:12: warning: symbol 'pda' was not declared. Should it be static?
drivers/staging/wlan-ng/prism2fw.c:155:21: warning: symbol 'nicid' was not declared. Should it be static?
drivers/staging/wlan-ng/prism2fw.c:156:20: warning: symbol 'rfid' was not declared. Should it be static?
drivers/staging/wlan-ng/prism2fw.c:157:20: warning: symbol 'macid' was not declared. Should it be static?
drivers/staging/wlan-ng/prism2fw.c:158:20: warning: symbol 'priid' was not declared. Should it be static?
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function pointer scan in struct cfg80211_ops is not
supposed to be assigned a function with a struct net_device
pointer as an argument. Instead access the net_device struct
in the following way:
struct net_device *dev = request->wdev->netdev;
sparse gives these warnings:
drivers/staging/wlan-ng/cfg80211.c:726:17: warning:
incorrect type in initializer (incompatible argument 2
(different base types))
expected int ( *scan )( ... )
got int ( extern [toplevel] *<noident> )( ... )
drivers/staging/wlan-ng/cfg80211.c:726:2: warning:
initialization from incompatible pointer type [enabled by default]
drivers/staging/wlan-ng/cfg80211.c:726:2: warning:
(near initialization for ‘prism2_usb_cfg_ops.scan’)
[enabled by default]
Signed-off-by: Emil Goode <emilgoode@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
instead we would have used kzalloc, so our memory which is allocated will be set to 0.
codepath:
the code path here is prism2sta_probe_usb, calling when ever usb-dev id
and usb-vendor id e.t.c matches with what ever present in the MODULE_DEVICE_TABLE,
and in prism2sta_probe_usb , we call create_wlan, and its called nowhere else...
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix frame size (stack usage) warning by allocating and freeing
pointers to the data.
drivers/staging/wlan-ng/prism2fw.c:1115:1: warning: the frame size of 4288 bytes is larger than 2048 bytes
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
this patch fixes the coding style problems found by using checkpatch.pl
drivers/staging/wlan-ng/prism2fw.c:175: ERROR: "foo * bar" should be "foo *bar"
drivers/staging/wlan-ng/prism2fw.c:210: WARNING: line over 80 characters
drivers/staging/wlan-ng/prism2fw.c:596: WARNING: line over 80 characters
drivers/staging/wlan-ng/prism2fw.c:658: ERROR: "foo * bar" should be "foo *bar"
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
there are warnings that are reported by checkpatch.pl
fixed the following problems
drivers/staging/wlan-ng/cfg80211.c:130: WARNING: line over 80 characters
drivers/staging/wlan-ng/cfg80211.c:366: WARNING: line over 80 characters
drivers/staging/wlan-ng/cfg80211.c:543: WARNING: line over 80 characters
drivers/staging/wlan-ng/cfg80211.c:665: WARNING: line over 80 characters
drivers/staging/wlan-ng/cfg80211.c:692: WARNING: line over 80 characters
drivers/staging/wlan-ng/cfg80211.c:735: WARNING: line over 80 characters
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Function cfg80211_inform_bss returns a pointer to a referenced struct cfg80211_bss
but no information is needed from this struct in function prism2_scan and therefore
we release it by calling cfg80211_put_bss.
Signed-off-by: Krzysztof Wilczynski <krzysztof.wilczynski@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
