This reverts commit 543e3a8da5.
Direct callers of __netpoll_setup() depend on it to set np->dev,
so we can't simply move that assignment up to netpoll_stup().
Reported-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is no point on delaying the packet if we can't fit a single byte
of data on it anymore. So lets just reduce the threshold by the amount
that a data chunk with 4 bytes (rounding) would use.
v2: based on the right tree
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since we enqueued the frame that was supposed to be sent
during the SP, and that frame may very well cary the
IEEE80211_TX_STATUS_EOSP bit, we may never close the SP
(WLAN_STA_SP will never be cleared). If that happens, we
will not open any new SP and will never respond to any poll
frame from the client.
Clear WLAN_STA_SP manually if a frame that was polled during
the SP is queued because of a starting A-MPDU session. The
client may not see the EOSP bit, but it will at least be
able to poll new frames in another SP.
Reported-by: Alesya Shapira <alesya.shapira@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
[remove erroneous comment]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
It is possible that the station is connected to an AP
with bandwidth of 80+80MHz or 160MHz. In such cases
there is no need to perform an upgrade as the maximal
supported bandwidth is 80MHz.
In addition, when upgrading and setting center_freq1
and bandwidth to 80MHz also set center_freq2 to 0.
Fixes: 0fabfaafec ("mac80211: upgrade BW of TDLS peers when possible"
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Frames that are sent between
ampdu_action(IEEE80211_AMPDU_TX_START) and the move to the
HT_AGG_STATE_OPERATIONAL state are buffered.
If we try to start an A-MPDU session while the peer is
sleeping and polling frames with U-APSD, we may have frames
that will be buffered by ieee80211_tx_prep_agg. These frames
have IEEE80211_TX_CTL_NO_PS_BUFFER set since they are sent to
a sleeping client and possibly IEEE80211_TX_STATUS_EOSP.
If the frame is buffered, we need clear these two flags
since they will be re-sent after the move to
HT_AGG_STATE_OPERATIONAL state which is very likely to
happen after the SP ends.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Commit 976bd9efda ("mac80211: move beacon_loss_count into ifmgd")
removed the member from the sta_info struct but the description stayed
lingering. Remove it.
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
By default, the rhashtable logic will fail to insert
objects if the key-chains are too long and un-balanced.
In the degenerate case where mac80211 is creating many
virtual interfaces connected to the same peer(s), this
case can happen.
St insecure_elasticity to true to allow chains to grow
as long as needed.
Signed-off-by: Ben Greear <greearb@candelatech.com>
[remove message, change commit message slightly]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The original hand-implemented hash-table in mac80211 couldn't result
in insertion errors, and while converting to rhashtable I evidently
forgot to check the errors.
This surfaced now only because Ben is adding many identical keys and
that resulted in hidden insertion errors.
Cc: stable@vger.kernel.org
Fixes: 7bedd0cfad ("mac80211: use rhashtable for station table")
Reported-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The min_def chanctx is affected not only by the current chandef, but
sometimes also by other stations on the vif. There's a valid scenario
where a TDLS peer can widen its BW, thereby causing the min_def
to increase.
Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The previous approach simply ignored chandef restrictions when calculating
the appropriate peer BW for a WIDER_BW peer. This could result in a
regulatory violation if both peers indicated 80MHz support, but the
regdomain forbade it.
Change the approach to setting a WIDER_BW peer's BW. Don't exempt it from
the chandef width at first. If during TDLS negotiation the chandef width
is upgraded, update the peer's BW to match.
Fixes: 0fabfaafec ("mac80211: upgrade BW of TDLS peers when possible")
Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Even if the current chandef width is equal to the station's max-BW, it
doesn't mean it's a valid width for TDLS. Make sure to always check
regulatory constraints in these cases.
Fixes: 0fabfaafec ("mac80211: upgrade BW of TDLS peers when possible")
Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Buffered multicast frames must be passed to the driver directly via
drv_tx instead of going through the txq, otherwise they cannot easily be
scheduled to be sent after DTIM.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This fixes the incorrect variable assignment on error path in
br_sysfs_addbr for when the call to kobject_create_and_add
fails to assign the value of -EINVAL to the returned variable of
err rather then incorrectly return zero making callers think this
function has succeededed due to the previous assignment being
assigned zero when assigning it the successful return value of
the call to sysfs_create_group which is zero.
Signed-off-by: Bastien Philbert <bastienphilbert@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
pskb_may_pull() can change skb->data, so we have to load ptr/optr at the
right place.
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
pskb_may_pull() can change skb->data, so we have to load ptr/optr at the
right place.
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge PAGE_CACHE_SIZE removal patches from Kirill Shutemov:
"PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.
This promise never materialized. And unlikely will.
Let's stop pretending that pages in page cache are special. They are
not.
The first patch with most changes has been done with coccinelle. The
second is manual fixups on top.
The third patch removes macros definition"
[ I was planning to apply this just before rc2, but then I spaced out,
so here it is right _after_ rc2 instead.
As Kirill suggested as a possibility, I could have decided to only
merge the first two patches, and leave the old interfaces for
compatibility, but I'd rather get it all done and any out-of-tree
modules and patches can trivially do the converstion while still also
working with older kernels, so there is little reason to try to
maintain the redundant legacy model. - Linus ]
* PAGE_CACHE_SIZE-removal:
mm: drop PAGE_CACHE_* and page_cache_{get,release} definition
mm, fs: remove remaining PAGE_CACHE_* and page_cache_{get,release} usage
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros
Mostly direct substitution with occasional adjustment or removing
outdated comments.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.
This promise never materialized. And unlikely will.
We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE. And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.
Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.
Let's stop pretending that pages in page cache are special. They are
not.
The changes are pretty straight-forward:
- <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};
- page_cache_get() -> get_page();
- page_cache_release() -> put_page();
This patch contains automated changes generated with coccinelle using
script below. For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.
The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.
There are few places in the code where coccinelle didn't reach. I'll
fix them manually in a separate patch. Comments and documentation also
will be addressed with the separate patch.
virtual patch
@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT
@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE
@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK
@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)
@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)
@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The skcpiher/shash conversion introduced a number of bugs in the
sunrpc code:
1) Missing calls to skcipher_request_set_tfm lead to crashes.
2) The allocation size of shash_desc is too small which leads to
memory corruption.
Fixes: 3b5cf20cf4 ("sunrpc: Use skcipher and ahash/shash")
Reported-by: J. Bruce Fields <bfields@fieldses.org>
Tested-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull networking fixes from David Miller:
1) Missing device reference in IPSEC input path results in crashes
during device unregistration. From Subash Abhinov Kasiviswanathan.
2) Per-queue ISR register writes not being done properly in macb
driver, from Cyrille Pitchen.
3) Stats accounting bugs in bcmgenet, from Patri Gynther.
4) Lightweight tunnel's TTL and TOS were swapped in netlink dumps, from
Quentin Armitage.
5) SXGBE driver has off-by-one in probe error paths, from Rasmus
Villemoes.
6) Fix race in save/swap/delete options in netfilter ipset, from
Vishwanath Pai.
7) Ageing time of bridge not set properly when not operating over a
switchdev device. Fix from Haishuang Yan.
8) Fix GRO regression wrt nested FOU/GUE based tunnels, from Alexander
Duyck.
9) IPV6 UDP code bumps wrong stats, from Eric Dumazet.
10) FEC driver should only access registers that actually exist on the
given chipset, fix from Fabio Estevam.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (73 commits)
net: mvneta: fix changing MTU when using per-cpu processing
stmmac: fix MDIO settings
Revert "stmmac: Fix 'eth0: No PHY found' regression"
stmmac: fix TX normal DESC
net: mvneta: use cache_line_size() to get cacheline size
net: mvpp2: use cache_line_size() to get cacheline size
net: mvpp2: fix maybe-uninitialized warning
tun, bpf: fix suspicious RCU usage in tun_{attach, detach}_filter
net: usb: cdc_ncm: adding Telit LE910 V2 mobile broadband card
rtnl: fix msg size calculation in if_nlmsg_size()
fec: Do not access unexisting register in Coldfire
net: mvneta: replace MVNETA_CPU_D_CACHE_LINE_SIZE with L1_CACHE_BYTES
net: mvpp2: replace MVPP2_CPU_D_CACHE_LINE_SIZE with L1_CACHE_BYTES
net: dsa: mv88e6xxx: Clear the PDOWN bit on setup
net: dsa: mv88e6xxx: Introduce _mv88e6xxx_phy_page_{read, write}
bpf: make padding in bpf_tunnel_key explicit
ipv6: udp: fix UDP_MIB_IGNOREDMULTI updates
bnxt_en: Fix ethtool -a reporting.
bnxt_en: Fix typo in bnxt_hwrm_set_pause_common().
bnxt_en: Implement proper firmware message padding.
...
Sasha Levin reported a suspicious rcu_dereference_protected() warning
found while fuzzing with trinity that is similar to this one:
[ 52.765684] net/core/filter.c:2262 suspicious rcu_dereference_protected() usage!
[ 52.765688] other info that might help us debug this:
[ 52.765695] rcu_scheduler_active = 1, debug_locks = 1
[ 52.765701] 1 lock held by a.out/1525:
[ 52.765704] #0: (rtnl_mutex){+.+.+.}, at: [<ffffffff816a64b7>] rtnl_lock+0x17/0x20
[ 52.765721] stack backtrace:
[ 52.765728] CPU: 1 PID: 1525 Comm: a.out Not tainted 4.5.0+ #264
[...]
[ 52.765768] Call Trace:
[ 52.765775] [<ffffffff813e488d>] dump_stack+0x85/0xc8
[ 52.765784] [<ffffffff810f2fa5>] lockdep_rcu_suspicious+0xd5/0x110
[ 52.765792] [<ffffffff816afdc2>] sk_detach_filter+0x82/0x90
[ 52.765801] [<ffffffffa0883425>] tun_detach_filter+0x35/0x90 [tun]
[ 52.765810] [<ffffffffa0884ed4>] __tun_chr_ioctl+0x354/0x1130 [tun]
[ 52.765818] [<ffffffff8136fed0>] ? selinux_file_ioctl+0x130/0x210
[ 52.765827] [<ffffffffa0885ce3>] tun_chr_ioctl+0x13/0x20 [tun]
[ 52.765834] [<ffffffff81260ea6>] do_vfs_ioctl+0x96/0x690
[ 52.765843] [<ffffffff81364af3>] ? security_file_ioctl+0x43/0x60
[ 52.765850] [<ffffffff81261519>] SyS_ioctl+0x79/0x90
[ 52.765858] [<ffffffff81003ba2>] do_syscall_64+0x62/0x140
[ 52.765866] [<ffffffff817d563f>] entry_SYSCALL64_slow_path+0x25/0x25
Same can be triggered with PROVE_RCU (+ PROVE_RCU_REPEATEDLY) enabled
from tun_attach_filter() when user space calls ioctl(tun_fd, TUN{ATTACH,
DETACH}FILTER, ...) for adding/removing a BPF filter on tap devices.
Since the fix in f91ff5b9ff ("net: sk_{detach|attach}_filter() rcu
fixes") sk_attach_filter()/sk_detach_filter() now dereferences the
filter with rcu_dereference_protected(), checking whether socket lock
is held in control path.
Since its introduction in 9940516259 ("tun: socket filter support"),
tap filters are managed under RTNL lock from __tun_chr_ioctl(). Thus the
sock_owned_by_user(sk) doesn't apply in this specific case and therefore
triggers the false positive.
Extend the BPF API with __sk_attach_filter()/__sk_detach_filter() pair
that is used by tap filters and pass in lockdep_rtnl_is_held() for the
rcu_dereference_protected() checks instead.
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Size of the attribute IFLA_PHYS_PORT_NAME was missing.
Fixes: db24a9044e ("net: add support for phys_port_name")
CC: David Ahern <dsahern@gmail.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We currently rely on the PMTU discovery of xfrm.
However if a packet is locally sent, the PMTU mechanism
of xfrm tries to do local socket notification what
might not work for applications like ping that don't
check for this. So add pmtu handling to vti_xmit to
report MTU changes immediately.
Reported-by: Mark McKinstry <Mark.McKinstry@alliedtelesis.co.nz>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Make the 2 byte padding in struct bpf_tunnel_key between tunnel_ttl
and tunnel_label members explicit. No issue has been observed, and
gcc/llvm does padding for the old struct already, where tunnel_label
was not yet present, so the current code works, but since it's part
of uapi, make sure we don't introduce holes in structs.
Therefore, add tunnel_ext that we can use generically in future
(f.e. to flag OAM messages for backends, etc). Also add the offset
to the compat tests to be sure should some compilers not padd the
tail of the old version of bpf_tunnel_key.
Fixes: 4018ab1875 ("bpf: support flow label for bpf_skb_{set, get}_tunnel_key")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
IPv6 counters updates use a different macro than IPv4.
Fixes: 36cbb2452c ("udp: Increment UDP_MIB_IGNOREDMULTI for arriving unmatched multicasts")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Rick Jones <rick.jones2@hp.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch should fix the issues seen with a recent fix to prevent
tunnel-in-tunnel frames from being generated with GRO. The fix itself is
correct for now as long as we do not add any devices that support
NETIF_F_GSO_GRE_CSUM. When such a device is added it could have the
potential to mess things up due to the fact that the outer transport header
points to the outer UDP header and not the GRE header as would be expected.
Fixes: fac8e0f579 ("tunnels: Don't apply GRO to multiple layers of encapsulation.")
Signed-off-by: Alexander Duyck <aduyck@mirantis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Somehow my patch for commit cea8768f33 ("sctp: allow
sctp_transmit_packet and others to use gfp") missed two important
chunks, which are now added.
Fixes: cea8768f33 ("sctp: allow sctp_transmit_packet and others to use gfp")
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-By: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When NET_SWITCHDEV=n, switchdev_port_attr_set will return -EOPNOTSUPP,
we should ignore this error code and continue to set the ageing time.
Fixes: c62987bbd8 ("bridge: push bridge setting ageing_time down to switchdev")
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Acked-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for you net tree,
they are:
1) There was a race condition between parallel save/swap and delete,
which resulted a kernel crash due to the increase ref for save, swap,
wrong ref decrease operations. Reported and fixed by Vishwanath Pai.
2) OVS should call into CT NAT for packets of new expected connections only
when the conntrack state is persisted with the 'commit' option to the
OVS CT action. From Jarno Rajahalme.
3) Resolve kconfig dependencies with new OVS NAT support. From Arnd Bergmann.
4) Early validation of entry->target_offset to make sure it doesn't take us
out from the blob, from Florian Westphal.
5) Again early validation of entry->next_offset to make sure it doesn't take
out from the blob, also from Florian.
6) Check that entry->target_offset is always of of sizeof(struct xt_entry)
for unconditional entries, when checking both from check_underflow()
and when checking for loops in mark_source_chains(), again from
Florian.
7) Fix inconsistent behaviour in nfnetlink_queue when
NFQA_CFG_F_FAIL_OPEN is set and netlink_unicast() fails due to buffer
overrun, we have to reinject the packet as the user expects.
8) Enforce nul-terminated table names from getsockopt GET_ENTRIES
requests.
9) Don't assume skb->sk is set from nft_bridge_reject and synproxy,
this fixes a recent update of the code to namespaceify
ip_default_ttl, patch from Liping Zhang.
This batch comes with four patches to validate x_tables blobs coming
from userspace. CONFIG_USERNS exposes the x_tables interface to
unpriviledged users and to be honest this interface never received the
attention for this move away from the CAP_NET_ADMIN domain. Florian is
working on another round with more patches with more sanity checks, so
expect a bit more Netfilter fixes in this development cycle than usual.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit fa50d974d1 ("ipv4: Namespaceify ip_default_ttl sysctl knob")
use sock_net(skb->sk) to get the net namespace, but we can't assume
that sk_buff->sk is always exist, so when it is NULL, oops will happen.
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Reviewed-by: Nikolay Borisov <kernel@kyup.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Make sure the table names via getsockopt GET_ENTRIES is nul-terminated
in ebtables and all the x_tables variants and their respective compat
code. Uncovered by KASAN.
Reported-by: Baozeng Ding <sploving1@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
When netlink unicast fails to deliver the message to userspace, we
should also check if the NFQA_CFG_F_FAIL_OPEN flag is set so we reinject
the packet back to the stack.
I think the user expects no packet drops when this flag is set due to
queueing to userspace errors, no matter if related to the internal queue
or when sending the netlink message to userspace.
The userspace application will still get the ENOBUFS error via recvmsg()
so the user still knows that, with the current configuration that is in
place, the userspace application is not consuming the messages at the
pace that the kernel needs.
Reported-by: "Yigal Reiss (yreiss)" <yreiss@cisco.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Tested-by: "Yigal Reiss (yreiss)" <yreiss@cisco.com>
Ben Hawkes says:
In the mark_source_chains function (net/ipv4/netfilter/ip_tables.c) it
is possible for a user-supplied ipt_entry structure to have a large
next_offset field. This field is not bounds checked prior to writing a
counter value at the supplied offset.
Problem is that mark_source_chains should not have been called --
the rule doesn't have a next entry, so its supposed to return
an absolute verdict of either ACCEPT or DROP.
However, the function conditional() doesn't work as the name implies.
It only checks that the rule is using wildcard address matching.
However, an unconditional rule must also not be using any matches
(no -m args).
The underflow validator only checked the addresses, therefore
passing the 'unconditional absolute verdict' test, while
mark_source_chains also tested for presence of matches, and thus
proceeeded to the next (not-existent) rule.
Unify this so that all the callers have same idea of 'unconditional rule'.
Reported-by: Ben Hawkes <hawkes@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Otherwise this function may read data beyond the ruleset blob.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
We should check that e->target_offset is sane before
mark_source_chains gets called since it will fetch the target entry
for loop detection.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The openvswitch code has gained support for calling into the
nf-nat-ipv4/ipv6 modules, however those can be loadable modules
in a configuration in which openvswitch is built-in, leading
to link errors:
net/built-in.o: In function `__ovs_ct_lookup':
:(.text+0x2cc2c8): undefined reference to `nf_nat_icmp_reply_translation'
:(.text+0x2cc66c): undefined reference to `nf_nat_icmpv6_reply_translation'
The dependency on (!NF_NAT || NF_NAT) prevents similar issues,
but NF_NAT is set to 'y' if any of the symbols selecting
it are built-in, but the link error happens when any of them
are modular.
A second issue is that even if CONFIG_NF_NAT_IPV6 is built-in,
CONFIG_NF_NAT_IPV4 might be completely disabled. This is unlikely
to be useful in practice, but the driver currently only handles
IPv6 being optional.
This patch improves the Kconfig dependency so that openvswitch
cannot be built-in if either of the two other symbols are set
to 'm', and it replaces the incorrect #ifdef in ovs_ct_nat_execute()
with two "if (IS_ENABLED())" checks that should catch all corner
cases also make the code more readable.
The same #ifdef exists ovs_ct_nat_to_attr(), where it does not
cause a link error, but for consistency I'm changing it the same
way.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 05752523e5 ("openvswitch: Interface with NAT.")
Acked-by: Joe Stringer <joe@ovn.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
OVS should call into CT NAT for packets of new expected connections only
when the conntrack state is persisted with the 'commit' option to the
OVS CT action. The test for this condition is doubly wrong, as the CT
status field is ANDed with the bit number (IPS_EXPECTED_BIT) rather
than the mask (IPS_EXPECTED), and due to the wrong assumption that the
expected bit would apply only for the first (i.e., 'new') packet of a
connection, while in fact the expected bit remains on for the lifetime of
an expected connection. The 'ctinfo' value IP_CT_RELATED derived from
the ct status can be used instead, as it is only ever applicable to
the 'new' packets of the expected connection.
Fixes: 05752523e5 ('openvswitch: Interface with NAT.')
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jarno Rajahalme <jarno@ovn.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This fix adds a new reference counter (ref_netlink) for the struct ip_set.
The other reference counter (ref) can be swapped out by ip_set_swap and we
need a separate counter to keep track of references for netlink events
like dump. Using the same ref counter for dump causes a race condition
which can be demonstrated by the following script:
ipset create hash_ip1 hash:ip family inet hashsize 1024 maxelem 500000 \
counters
ipset create hash_ip2 hash:ip family inet hashsize 300000 maxelem 500000 \
counters
ipset create hash_ip3 hash:ip family inet hashsize 1024 maxelem 500000 \
counters
ipset save &
ipset swap hash_ip3 hash_ip2
ipset destroy hash_ip3 /* will crash the machine */
Swap will exchange the values of ref so destroy will see ref = 0 instead of
ref = 1. With this fix in place swap will not succeed because ipset save
still has ref_netlink on the set (ip_set_swap doesn't swap ref_netlink).
Both delete and swap will error out if ref_netlink != 0 on the set.
Note: The changes to *_head functions is because previously we would
increment ref whenever we called these functions, we don't do that
anymore.
Reviewed-by: Joshua Hunt <johunt@akamai.com>
Signed-off-by: Vishwanath Pai <vpai@akamai.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
For the input parameter count, it's better to use the size
of destination buffer size, as nla_memcpy would take into
account the length of the source netlink attribute when
a data is copied from an attribute.
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For a route with IPv6 encapsulation, the traffic class and hop limit
values are interchanged when returned to userspace by the kernel.
For example, see below.
># ip route add 192.168.0.1 dev eth0.2 encap ip6 dst 0x50 tc 0x50 hoplimit 100 table 1000
># ip route show table 1000
192.168.0.1 encap ip6 id 0 src :: dst fe83::1 hoplimit 80 tc 100 dev eth0.2 scope link
Signed-off-by: Quentin Armitage <quentin@armitage.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull Ceph updates from Sage Weil:
"There is quite a bit here, including some overdue refactoring and
cleanup on the mon_client and osd_client code from Ilya, scattered
writeback support for CephFS and a pile of bug fixes from Zheng, and a
few random cleanups and fixes from others"
[ I already decided not to pull this because of it having been rebased
recently, but ended up changing my mind after all. Next time I'll
really hold people to it. Oh well. - Linus ]
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (34 commits)
libceph: use KMEM_CACHE macro
ceph: use kmem_cache_zalloc
rbd: use KMEM_CACHE macro
ceph: use lookup request to revalidate dentry
ceph: kill ceph_get_dentry_parent_inode()
ceph: fix security xattr deadlock
ceph: don't request vxattrs from MDS
ceph: fix mounting same fs multiple times
ceph: remove unnecessary NULL check
ceph: avoid updating directory inode's i_size accidentally
ceph: fix race during filling readdir cache
libceph: use sizeof_footer() more
ceph: kill ceph_empty_snapc
ceph: fix a wrong comparison
ceph: replace CURRENT_TIME by current_fs_time()
ceph: scattered page writeback
libceph: add helper that duplicates last extent operation
libceph: enable large, variable-sized OSD requests
libceph: osdc->req_mempool should be backed by a slab pool
libceph: make r_request msg_size calculation clearer
...
Use KMEM_CACHE() instead of kmem_cache_create() to simplify the code.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Don't open-code sizeof_footer() in read_partial_message() and
ceph_msg_revoke(). Also, after switching to sizeof_footer(), it's now
possible to use con_out_kvec_add() in prepare_write_message_footer().
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
This helper duplicates last extent operation in OSD request, then
adjusts the new extent operation's offset and length. The helper
is for scatterd page writeback, which adds nonconsecutive dirty
pages to single OSD request.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Turn r_ops into a flexible array member to enable large, consisting of
up to 16 ops, OSD requests. The use case is scattered writeback in
cephfs and, as far as the kernel client is concerned, 16 is just a made
up number.
r_ops had size 3 for copyup+hint+write, but copyup is really a special
case - it can only happen once. ceph_osd_request_cache is therefore
stuffed with num_ops=2 requests, anything bigger than that is allocated
with kmalloc(). req_mempool is backed by ceph_osd_request_cache, which
means either num_ops=1 or num_ops=2 for use_mempool=true - all existing
users (ceph_writepages_start(), ceph_osdc_writepages()) are fine with
that.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
ceph_osd_request_cache was introduced a long time ago. Also, osd_req
is about to get a flexible array member, which ceph_osd_request_cache
is going to be aware of.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Although msg_size is calculated correctly, the terms are grouped in
a misleading way - snaps appears to not have room for a u32 length.
Move calculation closer to its use and regroup terms.
No functional change.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
This avoids defining large array of r_reply_op_{len,result} in
in struct ceph_osd_request.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
This can happen if __close_session() in ceph_monc_stop() races with
a connection reset. We need to ignore such faults, otherwise it's
likely we would take !hunting, call __schedule_delayed() and end up
with delayed_work() executing on invalid memory, among other things.
The (two!) con->private tests are useless, as nothing ever clears
con->private. Nuke them.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Doing __schedule_delayed() in the hunting branch is pointless, as the
tick will have already been scheduled by then.
What we need to do instead is *reschedule* it in the !hunting branch,
after reopen_session() changes hunt_mult, which affects the delay.
This helps with spacing out connection attempts and avoiding things
like two back-to-back attempts followed by a longer period of waiting
around.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
hunting is now set in __open_session() and cleared in finish_hunting(),
instead of all around. The "session lost" message is printed not only
on connection resets, but also on keepalive timeouts.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Unless we are in the process of setting up a client (i.e. connecting to
the monitor cluster for the first time), apply a backoff: every time we
want to reopen a session, increase our timeout by a multiple (currently
2); when we complete the connection, reduce that multipler by 50%.
Mirrors ceph.git commit 794c86fd289bd62a35ed14368fa096c46736e9a2.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Split ping interval and ping timeout: ping interval is 10s; keepalive
timeout is 30s.
Make monc_ping_timeout a constant while at it - it's not actually
exported as a mount option (and the rest of tick-related settings won't
be either), so it's got no place in ceph_options.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Don't try to reconnect to the same monitor when we fail to establish
a session within a timeout or it's lost.
For that, pick_new_mon() needs to see the old value of cur_mon, so
don't clear it in __close_session() - all calls to __close_session()
but one are followed by __open_session() anyway. __open_session() is
only called when a new session needs to be established, so the "already
open?" branch, which is now in the way, is simply dropped.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
It is currently hard-coded in the mon_client that mdsmap and monmap
subs are continuous, while osdmap sub is always "onetime". To better
handle full clusters/pools in the osd_client, we need to be able to
issue continuous osdmap subs. Revamp subs code to allow us to specify
for each sub whether it should be continuous or not.
Although not strictly required for the above, switch to SUBSCRIBE2
protocol while at it, eliminating the ambiguity between a request for
"every map since X" and a request for "just the latest" when we don't
have a map yet (i.e. have epoch 0). SUBSCRIBE2 feature bit is now
required - it's been supported since pre-argonaut (2010).
Move "got mdsmap" call to the end of ceph_mdsc_handle_map() - calling
in before we validate the epoch and successfully install the new map
can mess up mon_client sub state.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Coupling hunting state with subscribe state is not a good idea. Clear
hunting when we complete the authentication handshake.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Our debugfs dir name is a concatenation of cluster fsid and client
unique ID ("global_id"). It used to be the case that we learned
global_id first, nowadays we always learn fsid first - the monmap is
sent before any auth replies are. ceph_debugfs_client_init() call in
ceph_monc_handle_map() is therefore never executed and can be removed.
Its counterpart in handle_auth_reply() doesn't really belong there
either: having to do monc->client and unlocking early to work around
lockdep is a testament to that. Move it into __ceph_open_session(),
where it can be called unconditionally.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
netpoll_setup() does a dev_hold() on np->dev, the netpoll device. If it
fails, it correctly does a dev_put() but leaves np->dev set. If we call
netpoll_cleanup() after the failure, np->dev is still set so we do another
dev_put(), which decrements the refcount an extra time.
It's questionable to call netpoll_cleanup() after netpoll_setup() fails,
but it can be difficult to find the problem, and we can easily avoid it in
this case. The extra decrements can lead to hangs like this:
unregister_netdevice: waiting for bond0 to become free. Usage count = -3
Set and clear np->dev at the points where we dev_hold() and dev_put() the
device.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A crash is observed when a decrypted packet is processed in receive
path. get_rps_cpus() tries to dereference the skb->dev fields but it
appears that the device is freed from the poison pattern.
[<ffffffc000af58ec>] get_rps_cpu+0x94/0x2f0
[<ffffffc000af5f94>] netif_rx_internal+0x140/0x1cc
[<ffffffc000af6094>] netif_rx+0x74/0x94
[<ffffffc000bc0b6c>] xfrm_input+0x754/0x7d0
[<ffffffc000bc0bf8>] xfrm_input_resume+0x10/0x1c
[<ffffffc000ba6eb8>] esp_input_done+0x20/0x30
[<ffffffc0000b64c8>] process_one_work+0x244/0x3fc
[<ffffffc0000b7324>] worker_thread+0x2f8/0x418
[<ffffffc0000bb40c>] kthread+0xe0/0xec
-013|get_rps_cpu(
| dev = 0xFFFFFFC08B688000,
| skb = 0xFFFFFFC0C76AAC00 -> (
| dev = 0xFFFFFFC08B688000 -> (
| name =
"......................................................
| name_hlist = (next = 0xAAAAAAAAAAAAAAAA, pprev =
0xAAAAAAAAAAA
Following are the sequence of events observed -
- Encrypted packet in receive path from netdevice is queued
- Encrypted packet queued for decryption (asynchronous)
- Netdevice brought down and freed
- Packet is decrypted and returned through callback in esp_input_done
- Packet is queued again for process in network stack using netif_rx
Since the device appears to have been freed, the dereference of
skb->dev in get_rps_cpus() leads to an unhandled page fault
exception.
Fix this by holding on to device reference when queueing packets
asynchronously and releasing the reference on call back return.
v2: Make the change generic to xfrm as mentioned by Steffen and
update the title to xfrm
Suggested-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Jerome Stanislaus <jeromes@codeaurora.org>
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
pnfs layout type from Christoph Hellwig. The new layout type is a
variant of the block layout which uses SCSI features to offer improved
fencing and device identification.
(Also: note this pull request also includes the client side of SCSI
layout, with Trond's permission.)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJW8+uhAAoJECebzXlCjuG+26YP/35DP4MPfszEJ5G0dYq5HMwl
dJUni8ajSHRswZ/2FqiBsRwmg3Djfc+uoXdOneD1f6ogkDe7S16yp+FRyh8/VwUs
Ym6LcxSjT28uqkxO0MblcnUl0G9nNSuOwqIsZ0HG7/UC7E6RmCF4o3r5fFUfOsA+
B3koB5UcHNAFythAk+GDwOQ46Fr96VkZ7Y+OhdNAwmeXZIdKXIufweueI/o2uipB
RoJFJ7lqrzAjFe+CqAUBr2l2k6lEKzdxbEH6HXQ5+cvVNwfVIgnrONpF78uF/p9T
NNDnZ+fn3YdRhd+W9RxUHZq7ZL5YOEA8kHsAlloeBH74GqCy7IcS+DrKt1ReM3px
bhgsXM3dqqJ9xiDGqmeE4VQwRF30SxgYZbO386E+cLHnCYV+vfY6RUaWPrk6On/r
FL9g3iyVvhyC4HO06Xm+uvvERw8R+fTZY9KZQKH2RL0Tr5DkWRRNJfasMO+PwGOv
Fdku01vyoA4Y6mbqUgQ9DmrbLO4gK3UyMiOTanQV9shrIDxI0MOuLK03zL25vZCM
s1A4YBpXmg4gx3XsOFM+tygv6EVujDu6scICeb+hj0vi0oG82Lx7T9e3MJEiYC+T
jbi8bu+x+0bX2obMprvDNVUzi/PgSUVpGCnRlbRTaXBa0lB6nV7uUiQ1HC9gGesm
ZWWiOv7du+7WlFP5c6r5
=mY8w
-----END PGP SIGNATURE-----
Merge tag 'nfsd-4.6' of git://linux-nfs.org/~bfields/linux
Pull nfsd updates from Bruce Fields:
"Various bugfixes, a RDMA update from Chuck Lever, and support for a
new pnfs layout type from Christoph Hellwig. The new layout type is a
variant of the block layout which uses SCSI features to offer improved
fencing and device identification.
(Also: note this pull request also includes the client side of SCSI
layout, with Trond's permission.)"
* tag 'nfsd-4.6' of git://linux-nfs.org/~bfields/linux:
sunrpc/cache: drop reference when sunrpc_cache_pipe_upcall() detects a race
nfsd: recover: fix memory leak
nfsd: fix deadlock secinfo+readdir compound
nfsd4: resfh unused in nfsd4_secinfo
svcrdma: Use new CQ API for RPC-over-RDMA server send CQs
svcrdma: Use new CQ API for RPC-over-RDMA server receive CQs
svcrdma: Remove close_out exit path
svcrdma: Hook up the logic to return ERR_CHUNK
svcrdma: Use correct XID in error replies
svcrdma: Make RDMA_ERROR messages work
rpcrdma: Add RPCRDMA_HDRLEN_ERR
svcrdma: svc_rdma_post_recv() should close connection on error
svcrdma: Close connection when a send error occurs
nfsd: Lower NFSv4.1 callback message size limit
svcrdma: Do not send Write chunk XDR pad with inline content
svcrdma: Do not write xdr_buf::tail in a Write chunk
svcrdma: Find client-provided write and reply chunks once per reply
nfsd: Update NFS server comments related to RDMA support
nfsd: Fix a memory leak when meeting unsupported state_protect_how4
nfsd4: fix bad bounds checking
Pull networking bugfixes from David Miller:
"Several bug fixes rolling in, some for changes introduced in this
merge window, and some for problems that have existed for some time:
1) Fix prepare_to_wait() handling in AF_VSOCK, from Claudio Imbrenda.
2) The new DST_CACHE should be a silent config option, from Dave
Jones.
3) inet_current_timestamp() unintentionally truncates timestamps to
16-bit, from Deepa Dinamani.
4) Missing reference to netns in ppp, from Guillaume Nault.
5) Free memory reference in hv_netvsc driver, from Haiyang Zhang.
6) Missing kernel doc documentation for function arguments in various
spots around the networking, from Luis de Bethencourt.
7) UDP stopped receiving broadcast packets properly, due to
overzealous multicast checks, fix from Paolo Abeni"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (59 commits)
net: ping: make ping_v6_sendmsg static
hv_netvsc: Fix the order of num_sc_offered decrement
net: Fix typos and whitespace.
hv_netvsc: Fix the array sizes to be max supported channels
hv_netvsc: Fix accessing freed memory in netvsc_change_mtu()
ppp: take reference on channels netns
net: Reset encap_level to avoid resetting features on inner IP headers
net: mediatek: fix checking for NULL instead of IS_ERR() in .probe
net: phy: at803x: Request 'reset' GPIO only for AT8030 PHY
at803x: fix reset handling
AF_VSOCK: Shrink the area influenced by prepare_to_wait
Revert "vsock: Fix blocking ops call in prepare_to_wait"
macb: fix PHY reset
ipv4: initialize flowi4_flags before calling fib_lookup()
fsl/fman: Workaround for Errata A-007273
ipv4: fix broadcast packets reception
net: hns: bug fix about the overflow of mss
net: hns: adds limitation for debug port mtu
net: hns: fix the bug about mtu setting
net: hns: fixes a bug of RSS
...
As ping_v6_sendmsg is used only in this file,
making it static
The body of "pingv6_prot" and "pingv6_protosw" were
moved at the middle of the file, to avoid having to
declare some static prototypes.
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch corrects an oversight in which we were allowing the encap_level
value to pass from the outer headers to the inner headers. As a result we
were incorrectly identifying UDP or GRE tunnels as also making use of ipip
or sit when the second header actually represented a tunnel encapsulated in
either a UDP or GRE tunnel which already had the features masked.
Fixes: 7644345622 ("net: Move GSO csum into SKB_GSO_CB")
Reported-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: Alexander Duyck <aduyck@mirantis.com>
Acked-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge third patch-bomb from Andrew Morton:
- more ocfs2 changes
- a few hotfixes
- Andy's compat cleanups
- misc fixes to fatfs, ptrace, coredump, cpumask, creds, eventfd,
panic, ipmi, kgdb, profile, kfifo, ubsan, etc.
- many rapidio updates: fixes, new drivers.
- kcov: kernel code coverage feature. Like gcov, but not
"prohibitively expensive".
- extable code consolidation for various archs
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (81 commits)
ia64/extable: use generic search and sort routines
x86/extable: use generic search and sort routines
s390/extable: use generic search and sort routines
alpha/extable: use generic search and sort routines
kernel/...: convert pr_warning to pr_warn
drivers: dma-coherent: use memset_io for DMA_MEMORY_IO mappings
drivers: dma-coherent: use MEMREMAP_WC for DMA_MEMORY_MAP
memremap: add MEMREMAP_WC flag
memremap: don't modify flags
kernel/signal.c: add compile-time check for __ARCH_SI_PREAMBLE_SIZE
mm/mprotect.c: don't imply PROT_EXEC on non-exec fs
ipc/sem: make semctl setting sempid consistent
ubsan: fix tree-wide -Wmaybe-uninitialized false positives
kfifo: fix sparse complaints
scripts/gdb: account for changes in module data structure
scripts/gdb: add cmdline reader command
scripts/gdb: add version command
kernel: add kcov code coverage
profile: hide unused functions when !CONFIG_PROC_FS
hpwdt: use nmi_panic() when kernel panics in NMI handler
...
- A few minor core fixups needed for the next patch series
- The IB SRIOV series. This has bounced around for several versions.
Of note is the fact that the first patch in this series effects
the net core. It was directed to netdev and DaveM for each iteration
of the series (three versions total). Dave did not object, but did
not respond either. I've taken this as permission to move forward
with the series.
- The new Intel X722 iWARP driver
- A huge set of updates to the Intel hfi1 driver. Of particular interest
here is that we have left the driver in staging since it still has an
API that people object to. Intel is working on a fix, but getting
these patches in now helps keep me sane as the upstream and Intel's
trees were over 300 patches apart.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=t2Ko
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull more rdma updates from Doug Ledford:
"Round two of 4.6 merge window patches.
This is a monster pull request. I held off on the hfi1 driver updates
(the hfi1 driver is intimately tied to the qib driver and the new
rdmavt software library that was created to help both of them) in my
first pull request. The hfi1/qib/rdmavt update is probably 90% of
this pull request. The hfi1 driver is being left in staging so that
it can be fixed up in regards to the API that Al and yourself didn't
like. Intel has agreed to do the work, but in the meantime, this
clears out 300+ patches in the backlog queue and brings my tree and
their tree closer to sync.
This also includes about 10 patches to the core and a few to mlx5 to
create an infrastructure for configuring SRIOV ports on IB devices.
That series includes one patch to the net core that we sent to netdev@
and Dave Miller with each of the three revisions to the series. We
didn't get any response to the patch, so we took that as implicit
approval.
Finally, this series includes Intel's new iWARP driver for their x722
cards. It's not nearly the beast as the hfi1 driver. It also has a
linux-next merge issue, but that has been resolved and it now passes
just fine.
Summary:
- A few minor core fixups needed for the next patch series
- The IB SRIOV series. This has bounced around for several versions.
Of note is the fact that the first patch in this series effects the
net core. It was directed to netdev and DaveM for each iteration
of the series (three versions total). Dave did not object, but did
not respond either. I've taken this as permission to move forward
with the series.
- The new Intel X722 iWARP driver
- A huge set of updates to the Intel hfi1 driver. Of particular
interest here is that we have left the driver in staging since it
still has an API that people object to. Intel is working on a fix,
but getting these patches in now helps keep me sane as the upstream
and Intel's trees were over 300 patches apart"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (362 commits)
IB/ipoib: Allow mcast packets from other VFs
IB/mlx5: Implement callbacks for manipulating VFs
net/mlx5_core: Implement modify HCA vport command
net/mlx5_core: Add VF param when querying vport counter
IB/ipoib: Add ndo operations for configuring VFs
IB/core: Add interfaces to control VF attributes
IB/core: Support accessing SA in virtualized environment
IB/core: Add subnet prefix to port info
IB/mlx5: Fix decision on using MAD_IFC
net/core: Add support for configuring VF GUIDs
IB/{core, ulp} Support above 32 possible device capability flags
IB/core: Replace setting the zero values in ib_uverbs_ex_query_device
net/mlx5_core: Introduce offload arithmetic hardware capabilities
net/mlx5_core: Refactor device capability function
net/mlx5_core: Fix caching ATOMIC endian mode capability
ib_srpt: fix a WARN_ON() message
i40iw: Replace the obsolete crypto hash interface with shash
IB/hfi1: Add SDMA cache eviction algorithm
IB/hfi1: Switch to using the pin query function
IB/hfi1: Specify mm when releasing pages
...
The code wants to prevent compat code from receiving messages. Use
in_compat_syscall for this.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
SCTP unfortunately has a different ABI for SCTP_SOCKOPT_CONNECTX3 for
32-bit and 64-bit callers. Use in_compat_syscall to correctly
distinguish them on all architectures.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When a thread is prepared for waiting by calling prepare_to_wait, sleeping
is not allowed until either the wait has taken place or finish_wait has
been called. The existing code in af_vsock imposed unnecessary no-sleep
assumptions to a broad list of backend functions.
This patch shrinks the influence of prepare_to_wait to the area where it
is strictly needed, therefore relaxing the no-sleep restriction there.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit 5988818008 ("vsock: Fix
blocking ops call in prepare_to_wait")
The commit reverted with this patch caused us to potentially miss wakeups.
Since the condition is not checked between the prepare_to_wait and the
schedule(), if a wakeup happens after the condition is checked but before
the sleep happens, we will miss it. ( A description of the problem can be
found here: http://www.makelinux.net/ldd3/chp-6-sect-2 ).
By reverting the patch, the behaviour is still incorrect (since we
shouldn't sleep between the prepare_to_wait and the schedule) but at least
it will not miss wakeups.
The next patch in the series actually fixes the behaviour.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Highlights include:
Features:
- Add support for multiple NFSv4.1 callbacks in flight
- Initial patchset for RPC multipath support
- Adapt RPC/RDMA to use the new completion queue API
Bugfixes and cleanups:
- nfs4: nfs4_ff_layout_prepare_ds should return NULL if connection failed
- Cleanups to remove nfs_inode_dio_wait and nfs4_file_fsync
- Fix RPC/RDMA credit accounting
- Properly handle RDMA_ERROR replies
- xprtrdma: Do not wait if ib_post_send() fails
- xprtrdma: Segment head and tail XDR buffers on page boundaries
- xprtrdma cleanups for dprintk, physical_op_map and unused macros
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=kC3t
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.6-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Highlights include:
Features:
- Add support for multiple NFSv4.1 callbacks in flight
- Initial patchset for RPC multipath support
- Adapt RPC/RDMA to use the new completion queue API
Bugfixes and cleanups:
- nfs4: nfs4_ff_layout_prepare_ds should return NULL if connection failed
- Cleanups to remove nfs_inode_dio_wait and nfs4_file_fsync
- Fix RPC/RDMA credit accounting
- Properly handle RDMA_ERROR replies
- xprtrdma: Do not wait if ib_post_send() fails
- xprtrdma: Segment head and tail XDR buffers on page boundaries
- xprtrdma cleanups for dprintk, physical_op_map and unused macros"
* tag 'nfs-for-4.6-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (35 commits)
nfs/blocklayout: make sure making a aligned read request
nfs4: nfs4_ff_layout_prepare_ds should return NULL if connection failed
nfs: remove nfs_inode_dio_wait
nfs: remove nfs4_file_fsync
xprtrdma: Use new CQ API for RPC-over-RDMA client send CQs
xprtrdma: Use an anonymous union in struct rpcrdma_mw
xprtrdma: Use new CQ API for RPC-over-RDMA client receive CQs
xprtrdma: Serialize credit accounting again
xprtrdma: Properly handle RDMA_ERROR replies
rpcrdma: Add RPCRDMA_HDRLEN_ERR
xprtrdma: Do not wait if ib_post_send() fails
xprtrdma: Segment head and tail XDR buffers on page boundaries
xprtrdma: Clean up dprintk format string containing a newline
xprtrdma: Clean up physical_op_map()
xprtrdma: Clean up unused RPCRDMA_INLINE_PAD_THRESH macro
NFS add callback_ops to nfs4_proc_bind_conn_to_session_callback
pnfs/NFSv4.1: Add multipath capabilities to pNFS flexfiles servers over NFSv3
SUNRPC: Allow addition of new transports to a struct rpc_clnt
NFSv4.1: nfs4_proc_bind_conn_to_session must iterate over all connections
SUNRPC: Make NFS swap work with multipath
...
Field fl4.flowi4_flags is not initialized in fib_compute_spec_dst()
before calling fib_lookup(), which means fib_table_lookup() is
using non-deterministic data at this line:
if (!(flp->flowi4_flags & FLOWI_FLAG_SKIP_NH_OIF)) {
Fix by initializing the entire fl4 structure, which will prevent
similar issues as fields are added in the future by ensuring that
all fields are initialized to zero unless explicitly initialized
to another value.
Fixes: 58189ca7b2 ("net: Fix vti use case with oif in dst lookups")
Suggested-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: Lance Richardson <lrichard@redhat.com>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, ingress ipv4 broadcast datagrams are dropped since,
in udp_v4_early_demux(), ip_check_mc_rcu() is invoked even on
bcast packets.
This patch addresses the issue, invoking ip_check_mc_rcu()
only for mcast packets.
Fixes: 6e54030932 ("ipv4/udp: Verify multicast group is ours in upd_v4_early_demux()")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
By returning -ENOIOCTLCMD, sock_do_ioctl() falls back to calling
dev_ioctl(), which provides support for NIC driver ioctls, which
includes ethtool support. This is similar to the way ioctls are handled
in udp.c or tcp.c.
This removes the requirement that ethtool for example be tied to the
support of a specific L3 protocol (ethtool uses an AF_INET socket
today).
Signed-off-by: David Decotigny <decot@googlers.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The millisecond timestamps returned by the function is
converted to network byte order by making a call to htons().
htons() only returns __be16 while __be32 is required here.
This was identified by the sparse warning from the buildbot:
net/ipv4/af_inet.c:1405:16: sparse: incorrect type in return
expression (different base types)
net/ipv4/af_inet.c:1405:16: expected restricted __be32
net/ipv4/af_inet.c:1405:16: got restricted __be16 [usertype] <noident>
Change the function to use htonl() to return the correct __be32 type
instead so that the millisecond value doesn't get truncated.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: James Morris <jmorris@namei.org>
Cc: Patrick McHardy <kaber@trash.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Fixes: 822c868532 ("net: ipv4: Convert IP network timestamps to be y2038 safe")
Reported-by: Fengguang Wu <fengguang.wu@intel.com> [0-day test robot]
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 911362c70d ("net: add dst_cache support") added a new
kconfig option that gets selected by other networking options.
It seems the intent wasn't to offer this as a user-selectable
option given the lack of help text, so this patch converts it
to a silent option.
Signed-off-by: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add two new NLAs to support configuration of Infiniband node or port
GUIDs. New applications can choose to use this interface to configure
GUIDs with iproute2 with commands such as:
ip link set dev ib0 vf 0 node_guid 00:02:c9:03:00:21:6e:70
ip link set dev ib0 vf 0 port_guid 00:02:c9:03:00:21:6e:78
A new ndo, ndo_sef_vf_guid is introduced to notify the net device of the
request to change the GUID.
Signed-off-by: Eli Cohen <eli@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
It can be useful to lower max_gso_segs on NIC with very low
number of TX descriptors like bcmgenet.
However, this is defeated by bridge since it does not propagate
the lower value of max_gso_segs and max_gso_size.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Petri Gynther <pgynther@google.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
It can be useful to report dev->gso_max_segs and dev->gso_max_size
so that "ip -d link" can display them to help debugging.
For the moment, these attributes are read-only.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Petri Gynther <pgynther@google.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the function dev_get_phys_port_name was added it missed a description
for it's len argument. Adding it.
Fixes: db24a9044e ("net: add support for phys_port_name")
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull x86 protection key support from Ingo Molnar:
"This tree adds support for a new memory protection hardware feature
that is available in upcoming Intel CPUs: 'protection keys' (pkeys).
There's a background article at LWN.net:
https://lwn.net/Articles/643797/
The gist is that protection keys allow the encoding of
user-controllable permission masks in the pte. So instead of having a
fixed protection mask in the pte (which needs a system call to change
and works on a per page basis), the user can map a (handful of)
protection mask variants and can change the masks runtime relatively
cheaply, without having to change every single page in the affected
virtual memory range.
This allows the dynamic switching of the protection bits of large
amounts of virtual memory, via user-space instructions. It also
allows more precise control of MMU permission bits: for example the
executable bit is separate from the read bit (see more about that
below).
This tree adds the MM infrastructure and low level x86 glue needed for
that, plus it adds a high level API to make use of protection keys -
if a user-space application calls:
mmap(..., PROT_EXEC);
or
mprotect(ptr, sz, PROT_EXEC);
(note PROT_EXEC-only, without PROT_READ/WRITE), the kernel will notice
this special case, and will set a special protection key on this
memory range. It also sets the appropriate bits in the Protection
Keys User Rights (PKRU) register so that the memory becomes unreadable
and unwritable.
So using protection keys the kernel is able to implement 'true'
PROT_EXEC on x86 CPUs: without protection keys PROT_EXEC implies
PROT_READ as well. Unreadable executable mappings have security
advantages: they cannot be read via information leaks to figure out
ASLR details, nor can they be scanned for ROP gadgets - and they
cannot be used by exploits for data purposes either.
We know about no user-space code that relies on pure PROT_EXEC
mappings today, but binary loaders could start making use of this new
feature to map binaries and libraries in a more secure fashion.
There is other pending pkeys work that offers more high level system
call APIs to manage protection keys - but those are not part of this
pull request.
Right now there's a Kconfig that controls this feature
(CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS) that is default enabled
(like most x86 CPU feature enablement code that has no runtime
overhead), but it's not user-configurable at the moment. If there's
any serious problem with this then we can make it configurable and/or
flip the default"
* 'mm-pkeys-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (38 commits)
x86/mm/pkeys: Fix mismerge of protection keys CPUID bits
mm/pkeys: Fix siginfo ABI breakage caused by new u64 field
x86/mm/pkeys: Fix access_error() denial of writes to write-only VMA
mm/core, x86/mm/pkeys: Add execute-only protection keys support
x86/mm/pkeys: Create an x86 arch_calc_vm_prot_bits() for VMA flags
x86/mm/pkeys: Allow kernel to modify user pkey rights register
x86/fpu: Allow setting of XSAVE state
x86/mm: Factor out LDT init from context init
mm/core, x86/mm/pkeys: Add arch_validate_pkey()
mm/core, arch, powerpc: Pass a protection key in to calc_vm_flag_bits()
x86/mm/pkeys: Actually enable Memory Protection Keys in the CPU
x86/mm/pkeys: Add Kconfig prompt to existing config option
x86/mm/pkeys: Dump pkey from VMA in /proc/pid/smaps
x86/mm/pkeys: Dump PKRU with other kernel registers
mm/core, x86/mm/pkeys: Differentiate instruction fetches
x86/mm/pkeys: Optimize fault handling in access_error()
mm/core: Do not enforce PKEY permissions on remote mm access
um, pkeys: Add UML arch_*_access_permitted() methods
mm/gup, x86/mm/pkeys: Check VMAs and PTEs for protection keys
x86/mm/gup: Simplify get_user_pages() PTE bit handling
...
Commit 22e0f8b932 ("net: sched: make bstats per cpu and estimator RCU safe")
added the argument cpu_bstats to functions gen_new_estimator and
gen_replace_estimator and now the descriptions of these are missing for the
documentation. Adding them.
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Function gnet_stats_copy_basic is missing the description of the cpu
argument in the documentation. Adding it.
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If a packet is either locally encapsulated or processed through GRO
it is marked with the offloads that it requires. However, when it is
decapsulated these tunnel offload indications are not removed. This
means that if we receive an encapsulated TCP packet, aggregate it with
GRO, decapsulate, and retransmit the resulting frame on a NIC that does
not support encapsulation, we won't be able to take advantage of hardware
offloads even though it is just a simple TCP packet at this point.
This fixes the problem by stripping off encapsulation offload indications
when packets are decapsulated.
The performance impacts of this bug are significant. In a test where a
Geneve encapsulated TCP stream is sent to a hypervisor, GRO'ed, decapsulated,
and bridged to a VM performance is improved by 60% (5Gbps->8Gbps) as a
result of avoiding unnecessary segmentation at the VM tap interface.
Reported-by: Ramu Ramamurthy <sramamur@linux.vnet.ibm.com>
Fixes: 68c33163 ("v4 GRE: Add TCP segmentation offload for GRE")
Signed-off-by: Jesse Gross <jesse@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When drivers express support for TSO of encapsulated packets, they
only mean that they can do it for one layer of encapsulation.
Supporting additional levels would mean updating, at a minimum,
more IP length fields and they are unaware of this.
No encapsulation device expresses support for handling offloaded
encapsulated packets, so we won't generate these types of frames
in the transmit path. However, GRO doesn't have a check for
multiple levels of encapsulation and will attempt to build them.
UDP tunnel GRO actually does prevent this situation but it only
handles multiple UDP tunnels stacked on top of each other. This
generalizes that solution to prevent any kind of tunnel stacking
that would cause problems.
Fixes: bf5a755f ("net-gre-gro: Add GRE support to the GRO stack")
Signed-off-by: Jesse Gross <jesse@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
ipip encapsulated packets can be merged together by GRO but the result
does not have the proper GSO type set or even marked as being
encapsulated at all. Later retransmission of these packets will likely
fail if the device does not support ipip offloads. This is similar to
the issue resolved in IPv6 sit in feec0cb3
("ipv6: gro: support sit protocol").
Reported-by: Patrick Boutilier <boutilpj@ednet.ns.ca>
Fixes: 9667e9bb ("ipip: Add gro callbacks to ipip offload")
Tested-by: Patrick Boutilier <boutilpj@ednet.ns.ca>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jesse Gross <jesse@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
SCTP is a protocol that is aligned to a word (4 bytes). Thus using bare
MTU can sometimes return values that are not aligned, like for loopback,
which is 65536 but ipv4_mtu() limits that to 65535. This mis-alignment
will cause the last non-aligned bytes to never be used and can cause
issues with congestion control.
So it's better to just consider a lower MTU and keep congestion control
calcs saner as they are based on PMTU.
Same applies to icmp frag needed messages, which is also fixed by this
patch.
One other effect of this is the inability to send MTU-sized packet
without queueing or fragmentation and without hitting Nagle. As the
check performed at sctp_packet_can_append_data():
if (chunk->skb->len + q->out_qlen >= transport->pathmtu - packet->overhead)
/* Enough data queued to fill a packet */
return SCTP_XMIT_OK;
with the above example of MTU, if there are no other messages queued,
one cannot send a packet that just fits one packet (65532 bytes) and
without causing DATA chunk fragmentation or a delay.
v2:
- Added WORD_TRUNC macro
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, if a chunk is scheduled to be sent through a transport that
is currently unconfirmed, it will be leaked as it is dequeued from outq
and is not re-queued nor freed.
As I'm not aware of any situation that may lead to this situation, I'm
fixing this by freeing the chunk and also logging a trace so that we can
fix the other bug if it ever happens.
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The SACK can be lost pretty much elsewhere, but if its allocation fail,
we know we are not sending it, so it is better to revert a_rwnd to its
previous value as this may give it a chance to issue a window update
later.
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
TCP protocol is still used these days, and TCP uses
clones in its transmit path. We can not optimize linux
stack assuming it is mostly used in routers, or that TCP
is dead.
Fixes: 795bb1c00d ("net: bulk free infrastructure for NAPI context, use napi_consume_skb")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking updates from David Miller:
"Highlights:
1) Support more Realtek wireless chips, from Jes Sorenson.
2) New BPF types for per-cpu hash and arrap maps, from Alexei
Starovoitov.
3) Make several TCP sysctls per-namespace, from Nikolay Borisov.
4) Allow the use of SO_REUSEPORT in order to do per-thread processing
of incoming TCP/UDP connections. The muxing can be done using a
BPF program which hashes the incoming packet. From Craig Gallek.
5) Add a multiplexer for TCP streams, to provide a messaged based
interface. BPF programs can be used to determine the message
boundaries. From Tom Herbert.
6) Add 802.1AE MACSEC support, from Sabrina Dubroca.
7) Avoid factorial complexity when taking down an inetdev interface
with lots of configured addresses. We were doing things like
traversing the entire address less for each address removed, and
flushing the entire netfilter conntrack table for every address as
well.
8) Add and use SKB bulk free infrastructure, from Jesper Brouer.
9) Allow offloading u32 classifiers to hardware, and implement for
ixgbe, from John Fastabend.
10) Allow configuring IRQ coalescing parameters on a per-queue basis,
from Kan Liang.
11) Extend ethtool so that larger link mode masks can be supported.
From David Decotigny.
12) Introduce devlink, which can be used to configure port link types
(ethernet vs Infiniband, etc.), port splitting, and switch device
level attributes as a whole. From Jiri Pirko.
13) Hardware offload support for flower classifiers, from Amir Vadai.
14) Add "Local Checksum Offload". Basically, for a tunneled packet
the checksum of the outer header is 'constant' (because with the
checksum field filled into the inner protocol header, the payload
of the outer frame checksums to 'zero'), and we can take advantage
of that in various ways. From Edward Cree"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1548 commits)
bonding: fix bond_get_stats()
net: bcmgenet: fix dma api length mismatch
net/mlx4_core: Fix backward compatibility on VFs
phy: mdio-thunder: Fix some Kconfig typos
lan78xx: add ndo_get_stats64
lan78xx: handle statistics counter rollover
RDS: TCP: Remove unused constant
RDS: TCP: Add sysctl tunables for sndbuf/rcvbuf on rds-tcp socket
net: smc911x: convert pxa dma to dmaengine
team: remove duplicate set of flag IFF_MULTICAST
bonding: remove duplicate set of flag IFF_MULTICAST
net: fix a comment typo
ethernet: micrel: fix some error codes
ip_tunnels, bpf: define IP_TUNNEL_OPTS_MAX and use it
bpf, dst: add and use dst_tclassid helper
bpf: make skb->tc_classid also readable
net: mvneta: bm: clarify dependencies
cls_bpf: reset class and reuse major in da
ldmvsw: Checkpatch sunvnet.c and sunvnet_common.c
ldmvsw: Add ldmvsw.c driver code
...
Merge second patch-bomb from Andrew Morton:
- a couple of hotfixes
- the rest of MM
- a new timer slack control in procfs
- a couple of procfs fixes
- a few misc things
- some printk tweaks
- lib/ updates, notably to radix-tree.
- add my and Nick Piggin's old userspace radix-tree test harness to
tools/testing/radix-tree/. Matthew said it was a godsend during the
radix-tree work he did.
- a few code-size improvements, switching to __always_inline where gcc
screwed up.
- partially implement character sets in sscanf
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (118 commits)
sscanf: implement basic character sets
lib/bug.c: use common WARN helper
param: convert some "on"/"off" users to strtobool
lib: add "on"/"off" support to kstrtobool
lib: update single-char callers of strtobool()
lib: move strtobool() to kstrtobool()
include/linux/unaligned: force inlining of byteswap operations
include/uapi/linux/byteorder, swab: force inlining of some byteswap operations
include/asm-generic/atomic-long.h: force inlining of some atomic_long operations
usb: common: convert to use match_string() helper
ide: hpt366: convert to use match_string() helper
ata: hpt366: convert to use match_string() helper
power: ab8500: convert to use match_string() helper
power: charger_manager: convert to use match_string() helper
drm/edid: convert to use match_string() helper
pinctrl: convert to use match_string() helper
device property: convert to use match_string() helper
lib/string: introduce match_string() helper
radix-tree tests: add test for radix_tree_iter_next
radix-tree tests: add regression3 test
...
RDS_TCP_DEFAULT_BUFSIZE has been unused since commit 1edd6a14d2
("RDS-TCP: Do not bloat sndbuf/rcvbuf in rds_tcp_tune").
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add per-net sysctl tunables to set the size of sndbuf and
rcvbuf on the kernel tcp socket.
The tunables are added at /proc/sys/net/rds/tcp/rds_tcp_sndbuf
and /proc/sys/net/rds/tcp/rds_tcp_rcvbuf.
These values must be set before accept() or connect(),
and there may be an arbitrary number of existing rds-tcp
sockets when the tunable is modified. To make sure that all
connections in the netns pick up the same value for the tunable,
we reset existing rds-tcp connections in the netns, so that
they can reconnect with the new parameters.
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
eBPF defines this as BPF_TUNLEN_MAX and OVS just uses the hard-coded
value inside struct sw_flow_key. Thus, add and use IP_TUNNEL_OPTS_MAX
for this, which makes the code a bit more generic and allows to remove
BPF_TUNLEN_MAX from eBPF code.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
We can just add a small helper dst_tclassid() for retrieving the
dst->tclassid value. It makes the code a bit better in that we can
get rid of the ifdef from filter.c by moving this into the header.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, the tc_classid from eBPF skb context is write-only, but there's
no good reason for tc programs to limit it to write-only. For example,
it can be used to transfer its state via tail calls where the resulting
tc_classid gets filled gradually.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are two issues with the current code. First one is that we need
to set res->class to 0 in case we use non-default classid matching.
This is important for the case where cls_bpf was initially set up with
an optional binding to a default class with tcf_bind_filter(), where
the underlying qdisc implements bind_tcf() that fills res->class and
tests for it later on when doing the classification. Convention for
these cases is that after tc_classify() was called, such qdiscs (atm,
drr, qfq, cbq, hfsc, htb) first test class, and if 0, then they lookup
based on classid.
Second, there's a bug with da mode, where res->classid is only assigned
a 16 bit minor, but it needs to expand to the full 32 bit major/minor
combination instead, therefore we need to expand with the bound major.
This is fine as classes belonging to a classful qdisc must share the
same major.
Fixes: 045efa82ff ("cls_bpf: introduce integrated actions")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently output of MPLS packets on tunnel vports is not allowed by Open
vSwitch. This is because historically encapsulation was done in such a way
that the inner_protocol field of the skb needed to hold the inner protocol
for both MPLS and tunnel encapsulation in order for GSO segmentation to be
performed correctly.
Since b2acd1dc39 ("openvswitch: Use regular GRE net_device instead of
vport") Open vSwitch makes use of lwt to output to tunnel netdevs which
perform encapsulation. As no drivers expose support for MPLS offloads this
means that GSO packets are segmented in software by validate_xmit_skb(),
which is called from __dev_queue_xmit(), before tunnel encapsulation occurs.
This means that the inner protocol of MPLS is no longer needed by the time
encapsulation occurs and the contention on the inner_protocol field of the
skb no longer occurs.
Thus it is now safe to output MPLS to tunnel vports.
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Jesse Gross <jesse@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
- cxgb4 updates
- nes updates
- unification of iwarp portmapper code to core
- add drain_cq API
- various ib_core updates
- minor ipoib updates
- minor mlx4 updates
- more significant mlx5 updates (including a minor merge conflict with
net-next tree...merge is simple to resolve and Stephen's resolution was
confirmed by Mellanox)
- trivial net/9p rdma conversion
- ocrdma RoCEv2 update
- srpt updates
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=kTkT
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma updates from Doug Ledford:
"Initial roundup of 4.6 merge window patches.
This is the first of two pull requests. It is the smaller request,
but touches for more different things (this is everything but what is
in or going into staging). The pull request for the code in
staging/rdma is on hold until after we decide what to do on the
write/writev API issue and may be partially deferred until 4.7 as a
result.
Summary:
- cxgb4 updates
- nes updates
- unification of iwarp portmapper code to core
- add drain_cq API
- various ib_core updates
- minor ipoib updates
- minor mlx4 updates
- more significant mlx5 updates (including a minor merge conflict
with net-next tree...merge is simple to resolve and Stephen's
resolution was confirmed by Mellanox)
- trivial net/9p rdma conversion
- ocrdma RoCEv2 update
- srpt updates"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (85 commits)
iwpm: crash fix for large connections test
iw_cxgb3: support for iWARP port mapping
iw_cxgb4: remove port mapper related code
iw_nes: remove port mapper related code
iwcm: common code for port mapper
net/9p: convert to new CQ API
IB/mlx5: Add support for don't trap rules
net/mlx5_core: Introduce forward to next priority action
net/mlx5_core: Create anchor of last flow table
iser: Accept arbitrary sg lists mapping if the device supports it
mlx5: Add arbitrary sg list support
IB/core: Add arbitrary sg_list support
IB/mlx5: Expose correct max_fast_reg_page_list_len
IB/mlx5: Make coding style more consistent
IB/mlx5: Convert UMR CQ to new CQ API
IB/ocrdma: Skip using unneeded intermediate variable
IB/ocrdma: Skip using unneeded intermediate variable
IB/ocrdma: Delete unnecessary variable initialisations in 11 functions
IB/core: Documentation fix in the MAD header file
IB/core: trivial prink cleanup.
...
Pull trivial tree updates from Jiri Kosina.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
drivers/rtc: broken link fix
drm/i915 Fix typos in i915_gem_fence.c
Docs: fix missing word in REPORTING-BUGS
lib+mm: fix few spelling mistakes
MAINTAINERS: add git URL for APM driver
treewide: Fix typo in printk
Now SYN_RECV request sockets are installed in ehash table, an ICMP
handler can find a request socket while another cpu handles an incoming
packet transforming this SYN_RECV request socket into an ESTABLISHED
socket.
We need to remove the now obsolete WARN_ON(req->sk), since req->sk
is set when a new child is created and added into listener accept queue.
If this race happens, the ICMP will do nothing special.
Fixes: 079096f103 ("tcp/dccp: install syn_recv requests into ehash table")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Ben Lazarus <blazarus@google.com>
Reported-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
vlan drivers lack proper propagation of gso_max_segs from
lower device.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The success of CMA allocation largely depends on the success of
migration and key factor of it is page reference count. Until now, page
reference is manipulated by direct calling atomic functions so we cannot
follow up who and where manipulate it. Then, it is hard to find actual
reason of CMA allocation failure. CMA allocation should be guaranteed
to succeed so finding offending place is really important.
In this patch, call sites where page reference is manipulated are
converted to introduced wrapper function. This is preparation step to
add tracepoint to each page reference manipulation function. With this
facility, we can easily find reason of CMA allocation failure. There is
no functional change in this patch.
In addition, this patch also converts reference read sites. It will
help a second step that renames page._count to something else and
prevents later attempt to direct access to it (Suggested by Andrew).
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Here's the big tty/serial driver pull request for 4.6-rc1.
Lots of changes in here, Peter has been on a tear again, with lots of
refactoring and bugs fixes, many thanks to the great work he has been
doing. Lots of driver updates and fixes as well, full details in the
shortlog.
All have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlbp8z8ACgkQMUfUDdst+ym1vwCgnOOCORaZyeQ4QrcxPAK5pHFn
VrMAoNHvDgNYtG+Hmzv25Lgp3HnysPin
=MLRG
-----END PGP SIGNATURE-----
Merge tag 'tty-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial updates from Greg KH:
"Here's the big tty/serial driver pull request for 4.6-rc1.
Lots of changes in here, Peter has been on a tear again, with lots of
refactoring and bugs fixes, many thanks to the great work he has been
doing. Lots of driver updates and fixes as well, full details in the
shortlog.
All have been in linux-next for a while with no reported issues"
* tag 'tty-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (220 commits)
serial: 8250: describe CONFIG_SERIAL_8250_RSA
serial: samsung: optimize UART rx fifo access routine
serial: pl011: add mark/space parity support
serial: sa1100: make sa1100_register_uart_fns a function
tty: serial: 8250: add MOXA Smartio MUE boards support
serial: 8250: convert drivers to use up_to_u8250p()
serial: 8250/mediatek: fix building with SERIAL_8250=m
serial: 8250/ingenic: fix building with SERIAL_8250=m
serial: 8250/uniphier: fix modular build
Revert "drivers/tty/serial: make 8250/8250_ingenic.c explicitly non-modular"
Revert "drivers/tty/serial: make 8250/8250_mtk.c explicitly non-modular"
serial: mvebu-uart: initial support for Armada-3700 serial port
serial: mctrl_gpio: Add missing module license
serial: ifx6x60: avoid uninitialized variable use
tty/serial: at91: fix bad offset for UART timeout register
tty/serial: at91: restore dynamic driver binding
serial: 8250: Add hardware dependency to RT288X option
TTY, devpts: document pty count limiting
tty: goldfish: support platform_device with id -1
drivers: tty: goldfish: Add device tree bindings
...
sunrpc_cache_pipe_upcall() can detect a race if CACHE_PENDING is no longer
set. In this case it aborts the queuing of the upcall.
However it has already taken a new counted reference on "h" and
doesn't "put" it, even though it frees the data structure holding the reference.
So let's delay the "cache_get" until we know we need it.
Fixes: f9e1aedc6c ("sunrpc/cache: remove races with queuing an upcall.")
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Pull crypto update from Herbert Xu:
"Here is the crypto update for 4.6:
API:
- Convert remaining crypto_hash users to shash or ahash, also convert
blkcipher/ablkcipher users to skcipher.
- Remove crypto_hash interface.
- Remove crypto_pcomp interface.
- Add crypto engine for async cipher drivers.
- Add akcipher documentation.
- Add skcipher documentation.
Algorithms:
- Rename crypto/crc32 to avoid name clash with lib/crc32.
- Fix bug in keywrap where we zero the wrong pointer.
Drivers:
- Support T5/M5, T7/M7 SPARC CPUs in n2 hwrng driver.
- Add PIC32 hwrng driver.
- Support BCM6368 in bcm63xx hwrng driver.
- Pack structs for 32-bit compat users in qat.
- Use crypto engine in omap-aes.
- Add support for sama5d2x SoCs in atmel-sha.
- Make atmel-sha available again.
- Make sahara hashing available again.
- Make ccp hashing available again.
- Make sha1-mb available again.
- Add support for multiple devices in ccp.
- Improve DMA performance in caam.
- Add hashing support to rockchip"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (116 commits)
crypto: qat - remove redundant arbiter configuration
crypto: ux500 - fix checks of error code returned by devm_ioremap_resource()
crypto: atmel - fix checks of error code returned by devm_ioremap_resource()
crypto: qat - Change the definition of icp_qat_uof_regtype
hwrng: exynos - use __maybe_unused to hide pm functions
crypto: ccp - Add abstraction for device-specific calls
crypto: ccp - CCP versioning support
crypto: ccp - Support for multiple CCPs
crypto: ccp - Remove check for x86 family and model
crypto: ccp - memset request context to zero during import
lib/mpi: use "static inline" instead of "extern inline"
lib/mpi: avoid assembler warning
hwrng: bcm63xx - fix non device tree compatibility
crypto: testmgr - allow rfc3686 aes-ctr variants in fips mode.
crypto: qat - The AE id should be less than the maximal AE number
lib/mpi: Endianness fix
crypto: rockchip - add hash support for crypto engine in rk3288
crypto: xts - fix compile errors
crypto: doc - add skcipher API documentation
crypto: doc - update AEAD AD handling
...
The inner headers are invalid after a xfrm transformation.
So reset the skb encapsulation field to ensure nobody tries
to access the inner headers.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
We can hit an OOM condition if we are under presure because
we can not free the entries in gc_list fast enough. So add
a counter for the not yet freed entries in the gc_list and
refuse new allocations if the value is too high.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
When the ETHTOOL_GLINKSETTINGS implementation finds that userland is
using the wrong number of words of link mode bitmaps (or is trying to
find out the right numbers) it sets the cmd field to 0 in the response
structure.
This is inconsistent with the implementation of every other ethtool
command, so let's remove that inconsistency before it gets into a
stable release.
Fixes: 3f1ac7a700 ("net: ethtool: add new ETHTOOL_xLINKSETTINGS API")
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
local_bh_disable() + spin_lock() is equivalent to spin_lock_bh(), same for
the unlock/enable case, so replace the calls by the appropriate wrappers.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
These patches include several bugfixes and cleanups for the NFSoRDMA client.
This includes bugfixes for NFS v4.1, proper RDMA_ERROR handling, and fixes
from the recent workqueue swicchover. These patches also switch xprtrdma to
use the new CQ API
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=aHja
-----END PGP SIGNATURE-----
Merge tag 'nfs-rdma-4.6-1' of git://git.linux-nfs.org/projects/anna/nfs-rdma
NFS: NFSoRDMA Client Side Changes
These patches include several bugfixes and cleanups for the NFSoRDMA client.
This includes bugfixes for NFS v4.1, proper RDMA_ERROR handling, and fixes
from the recent workqueue swicchover. These patches also switch xprtrdma to
use the new CQ API
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
* tag 'nfs-rdma-4.6-1' of git://git.linux-nfs.org/projects/anna/nfs-rdma: (787 commits)
xprtrdma: Use new CQ API for RPC-over-RDMA client send CQs
xprtrdma: Use an anonymous union in struct rpcrdma_mw
xprtrdma: Use new CQ API for RPC-over-RDMA client receive CQs
xprtrdma: Serialize credit accounting again
xprtrdma: Properly handle RDMA_ERROR replies
rpcrdma: Add RPCRDMA_HDRLEN_ERR
xprtrdma: Do not wait if ib_post_send() fails
xprtrdma: Segment head and tail XDR buffers on page boundaries
xprtrdma: Clean up dprintk format string containing a newline
xprtrdma: Clean up physical_op_map()
xprtrdma: Clean up unused RPCRDMA_INLINE_PAD_THRESH macro
$ make tags
GEN tags
ctags: Warning: drivers/acpi/processor_idle.c:64: null expansion of name pattern "\1"
ctags: Warning: drivers/xen/events/events_2l.c:41: null expansion of name pattern "\1"
ctags: Warning: kernel/locking/lockdep.c:151: null expansion of name pattern "\1"
ctags: Warning: kernel/rcu/rcutorture.c:133: null expansion of name pattern "\1"
ctags: Warning: kernel/rcu/rcutorture.c:135: null expansion of name pattern "\1"
ctags: Warning: kernel/workqueue.c:323: null expansion of name pattern "\1"
ctags: Warning: net/ipv4/syncookies.c:53: null expansion of name pattern "\1"
ctags: Warning: net/ipv6/syncookies.c:44: null expansion of name pattern "\1"
ctags: Warning: net/rds/page.c:45: null expansion of name pattern "\1"
Which are all the result of the DEFINE_PER_CPU pattern:
scripts/tags.sh:200: '/\<DEFINE_PER_CPU([^,]*, *\([[:alnum:]_]*\)/\1/v/'
scripts/tags.sh:201: '/\<DEFINE_PER_CPU_SHARED_ALIGNED([^,]*, *\([[:alnum:]_]*\)/\1/v/'
The below cures them. All except the workqueue one are within reasonable
distance of the 80 char limit. TJ do you have any preference on how to
fix the wq one, or shall we just not care its too long?
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pablo Neira Ayuso says:
====================
Netfilter/IPVS/OVS updates for net-next
The following patchset contains Netfilter/IPVS fixes and OVS NAT
support, more specifically this batch is composed of:
1) Fix a crash in ipset when performing a parallel flush/dump with
set:list type, from Jozsef Kadlecsik.
2) Make sure NFACCT_FILTER_* netlink attributes are in place before
accessing them, from Phil Turnbull.
3) Check return error code from ip_vs_fill_iph_skb_off() in IPVS SIP
helper, from Arnd Bergmann.
4) Add workaround to IPVS to reschedule existing connections to new
destination server by dropping the packet and wait for retransmission
of TCP syn packet, from Julian Anastasov.
5) Allow connection rescheduling in IPVS when in CLOSE state, also
from Julian.
6) Fix wrong offset of SIP Call-ID in IPVS helper, from Marco Angaroni.
7) Validate IPSET_ATTR_ETHER netlink attribute length, from Jozsef.
8) Check match/targetinfo netlink attribute size in nft_compat,
patch from Florian Westphal.
9) Check for integer overflow on 32-bit systems in x_tables, from
Florian Westphal.
Several patches from Jarno Rajahalme to prepare the introduction of
NAT support to OVS based on the Netfilter infrastructure:
10) Schedule IP_CT_NEW_REPLY definition for removal in
nf_conntrack_common.h.
11) Simplify checksumming recalculation in nf_nat.
12) Add comments to the openvswitch conntrack code, from Jarno.
13) Update the CT state key only after successful nf_conntrack_in()
invocation.
14) Find existing conntrack entry after upcall.
15) Handle NF_REPEAT case due to templates in nf_conntrack_in().
16) Call the conntrack helper functions once the conntrack has been
confirmed.
17) And finally, add the NAT interface to OVS.
The batch closes with:
18) Cleanup to use spin_unlock_wait() instead of
spin_lock()/spin_unlock(), from Nicholas Mc Guire.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The spin_lock()/spin_unlock() is synchronizing on the
nf_conntrack_locks_all_lock which is equivalent to
spin_unlock_wait() but the later should be more efficient.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
On loaded TCP servers, looking at millions of sockets can hold
cpu for many seconds, if the lookup condition is very narrow.
(eg : ss dst 1.2.3.4 )
Better add a cond_resched() to allow other processes to access
the cpu.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend OVS conntrack interface to cover NAT. New nested
OVS_CT_ATTR_NAT attribute may be used to include NAT with a CT action.
A bare OVS_CT_ATTR_NAT only mangles existing and expected connections.
If OVS_NAT_ATTR_SRC or OVS_NAT_ATTR_DST is included within the nested
attributes, new (non-committed/non-confirmed) connections are mangled
according to the rest of the nested attributes.
The corresponding OVS userspace patch series includes test cases (in
tests/system-traffic.at) that also serve as example uses.
This work extends on a branch by Thomas Graf at
https://github.com/tgraf/ovs/tree/nat.
Signed-off-by: Jarno Rajahalme <jarno@ovn.org>
Acked-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Joe Stringer <joe@ovn.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
There is no need to help connections that are not confirmed, so we can
delay helping new connections to the time when they are confirmed.
This change is needed for NAT support, and having this as a separate
patch will make the following NAT patch a bit easier to review.
Signed-off-by: Jarno Rajahalme <jarno@ovn.org>
Acked-by: Joe Stringer <joe@ovn.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Repeat the nf_conntrack_in() call when it returns NF_REPEAT. This
avoids dropping a SYN packet re-opening an existing TCP connection.
Signed-off-by: Jarno Rajahalme <jarno@ovn.org>
Acked-by: Joe Stringer <joe@ovn.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add a new function ovs_ct_find_existing() to find an existing
conntrack entry for which this packet was already applied to. This is
only to be called when there is evidence that the packet was already
tracked and committed, but we lost the ct reference due to an
userspace upcall.
ovs_ct_find_existing() is called from skb_nfct_cached(), which can now
hide the fact that the ct reference may have been lost due to an
upcall. This allows ovs_ct_commit() to be simplified.
This patch is needed by later "openvswitch: Interface with NAT" patch,
as we need to be able to pass the packet through NAT using the
original ct reference also after the reference is lost after an
upcall.
Signed-off-by: Jarno Rajahalme <jarno@ovn.org>
Acked-by: Joe Stringer <joe@ovn.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Only a successful nf_conntrack_in() call can effect a connection state
change, so it suffices to update the key only after the
nf_conntrack_in() returns.
This change is needed for the later NAT patches.
Signed-off-by: Jarno Rajahalme <jarno@ovn.org>
Acked-by: Joe Stringer <joe@ovn.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This makes the code easier to understand and the following patches
more focused.
Signed-off-by: Jarno Rajahalme <jarno@ovn.org>
Acked-by: Joe Stringer <joe@ovn.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
NAT checksum recalculation code assumes existence of skb_dst, which
becomes a problem for a later patch in the series ("openvswitch:
Interface with NAT."). Simplify this by removing the check on
skb_dst, as the checksum will be dealt with later in the stack.
Suggested-by: Pravin Shelar <pshelar@nicira.com>
Signed-off-by: Jarno Rajahalme <jarno@ovn.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Remove the definition of IP_CT_NEW_REPLY from the kernel as it does
not make sense. This allows the definition of IP_CT_NUMBER to be
simplified as well.
Signed-off-by: Jarno Rajahalme <jarno@ovn.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Rework the netdev event handler, similar to what the Mellanox Spectrum
driver does, to easily welcome more events later (for example
NETDEV_PRECHANGEUPPER) and use netdev helpers (such as
netif_is_bridge_master).
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
netdev_upper_dev_unlink() which notifies NETDEV_CHANGEUPPER, returns
void, as well as del_nbp(). So there's no advantage to catch an eventual
error from the port_bridge_leave routine at the DSA level.
Make this routine void for the DSA layer and its existing drivers.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rename DSA port_join_bridge and port_leave_bridge routines to
respectively port_bridge_join and port_bridge_leave in order to respect
an implicit Port::Bridge namespace.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zefir Kurtisi reported kernel panic with an openwrt specific patch.
However, it turns out that mainline has a similar bug waiting to happen.
Once NF_HOOK() returns the skb is in undefined state and must not be
used. Moreover, the okfn must consume the skb to support async
processing (NF_QUEUE).
Current okfn in this spot doesn't consume it and caller assumes that
NF_HOOK return value tells us if skb was freed or not, but thats wrong.
It "works" because no in-tree user registers a NFPROTO_BRIDGE hook at
LOCAL_IN that returns STOLEN or NF_QUEUE verdicts.
Once we add NF_QUEUE support for nftables bridge this will break --
NF_QUEUE holds the skb for async processing, caller will erronoulsy
return RX_HANDLER_PASS and on reinject netfilter will access free'd skb.
Fix this by pushing skb up the stack in the okfn instead.
NB: It also seems dubious to use LOCAL_IN while bypassing PRE_ROUTING
completely in this case but this is how its been forever so it seems
preferable to not change this.
Cc: Felix Fietkau <nbd@openwrt.org>
Cc: Zefir Kurtisi <zefir.kurtisi@neratec.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Tested-by: Zefir Kurtisi <zefir.kurtisi@neratec.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johan Hedberg says:
====================
pull request: bluetooth-next 2016-03-12
Here's the last bluetooth-next pull request for the 4.6 kernel.
- New USB ID for AR3012 in btusb
- New BCM2E55 ACPI ID
- Buffer overflow fix for the Add Advertising command
- Support for a new Bluetooth LE limited privacy mode
- Fix for firmware activation in btmrvl_sdio
- Cleanups to mac802154 & 6lowpan code
Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The fixed phys delete function simply removed the fixed phy from the
internal linked list and freed the memory. It however did not
unregister the associated phy device. This meant it was still possible
to find the phy device on the mdio bus.
Make fixed_phy_del() an internal function and add a
fixed_phy_unregister() to unregisters the phy device and then uses
fixed_phy_del() to free resources.
Modify DSA to use this new API function, so we don't leak phys.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
All ports types can have a fixed PHY associated with it. Remove the
check which limits removal to only CPU and DSA ports.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
The phy is disconnected from the slave in dsa_slave_destroy(). Don't
destroy fixed link phys until after this, since there can be fixed
linked phys connected to ports.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the phy is disconnected, the parent pointer to the netdev it was
attached to is set to NULL. The code then tries to suspend the phy,
but dsa_slave_fixed_link_update needs the parent pointer to determine
which switch the phy is connected to. So it dereferenced a NULL
pointer. Check for this condition.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Calling ib_poll_cq() to sort through WCs during a completion is a
common pattern amongst RDMA consumers. Since commit 14d3a3b249
("IB: add a proper completion queue abstraction"), WC sorting can
be handled by the IB core.
By converting to this new API, xprtrdma is made a better neighbor to
other RDMA consumers, as it allows the core to schedule the delivery
of completions more fairly amongst all active consumers.
Because each ib_cqe carries a pointer to a completion method, the
core can now post its own operations on a consumer's QP, and handle
the completions itself, without changes to the consumer.
Send completions were previously handled entirely in the completion
upcall handler (ie, deferring to a process context is unneeded).
Thus IB_POLL_SOFTIRQ is a direct replacement for the current
xprtrdma send code path.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Devesh Sharma <devesh.sharma@broadcom.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Calling ib_poll_cq() to sort through WCs during a completion is a
common pattern amongst RDMA consumers. Since commit 14d3a3b249
("IB: add a proper completion queue abstraction"), WC sorting can
be handled by the IB core.
By converting to this new API, xprtrdma is made a better neighbor to
other RDMA consumers, as it allows the core to schedule the delivery
of completions more fairly amongst all active consumers.
Because each ib_cqe carries a pointer to a completion method, the
core can now post its own operations on a consumer's QP, and handle
the completions itself, without changes to the consumer.
xprtrdma's reply processing is already handled in a work queue, but
there is some initial order-dependent processing that is done in the
soft IRQ context before a work item is scheduled.
IB_POLL_SOFTIRQ is a direct replacement for the current xprtrdma
receive code path.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Devesh Sharma <devesh.sharma@broadcom.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Commit fe97b47cd6 ("xprtrdma: Use workqueue to process RPC/RDMA
replies") replaced the reply tasklet with a workqueue that allows
RPC replies to be processed in parallel. Thus the credit values in
RPC-over-RDMA replies can be applied in a different order than in
which the server sent them.
To fix this, revert commit eba8ff660b ("xprtrdma: Move credit
update to RPC reply handler"). Reverting is done by hand to
accommodate code changes that have occurred since then.
Fixes: fe97b47cd6 ("xprtrdma: Use workqueue to process . . .")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
These are shorter than RPCRDMA_HDRLEN_MIN, and they need to
complete the waiting RPC.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If ib_post_send() in ro_unmap_sync() fails, the WRs have not been
posted, no completions will fire, and wait_for_completion() will
wait forever. Skip the wait in that case.
To ensure the MRs are invalid, disconnect.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
A single memory allocation is used for the pair of buffers wherein
the RPC client builds an RPC call message and decodes its matching
reply. These buffers are sized based on the maximum possible size
of the RPC call and reply messages for the operation in progress.
This means that as the call buffer increases in size, the start of
the reply buffer is pushed farther into the memory allocation.
RPC requests are growing in size. It used to be that both the call
and reply buffers fit inside a single page.
But these days, thanks to NFSv4 (and especially security labels in
NFSv4.2) the maximum call and reply sizes are large. NFSv4.0 OPEN,
for example, now requires a 6KB allocation for a pair of call and
reply buffers, and NFSv4 LOOKUP is not far behind.
As the maximum size of a call increases, the reply buffer is pushed
far enough into the buffer's memory allocation that a page boundary
can appear in the middle of it.
When the maximum possible reply size is larger than the client's
RDMA receive buffers (currently 1KB), the client has to register a
Reply chunk for the server to RDMA Write the reply into.
The logic in rpcrdma_convert_iovs() assumes that xdr_buf head and
tail buffers would always be contained on a single page. It supplies
just one segment for the head and one for the tail.
FMR, for example, registers up to a page boundary (only a portion of
the reply buffer in the OPEN case above). But without additional
segments, it doesn't register the rest of the buffer.
When the server tries to write the OPEN reply, the RDMA Write fails
with a remote access error since the client registered only part of
the Reply chunk.
rpcrdma_convert_iovs() must split the XDR buffer into multiple
segments, each of which are guaranteed not to contain a page
boundary. That way fmr_op_map is given the proper number of segments
to register the whole reply buffer.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Devesh Sharma <devesh.sharma@broadcom.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
physical_op_unmap{_sync} don't use mr_nsegs, so don't bother to set
it in physical_op_map.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Per RFC4898, they count segments sent/received
containing a positive length data segment (that includes
retransmission segments carrying data). Unlike
tcpi_segs_out/in, tcpi_data_segs_out/in excludes segments
carrying no data (e.g. pure ack).
The patch also updates the segs_in in tcp_fastopen_add_skb()
so that segs_in >= data_segs_in property is kept.
Together with retransmission data, tcpi_data_segs_out
gives a better signal on the rxmit rate.
v6: Rebase on the latest net-next
v5: Eric pointed out that checking skb->len is still needed in
tcp_fastopen_add_skb() because skb can carry a FIN without data.
Hence, instead of open coding segs_in and data_segs_in, tcp_segs_in()
helper is used. Comment is added to the fastopen case to explain why
segs_in has to be reset and tcp_segs_in() has to be called before
__skb_pull().
v4: Add comment to the changes in tcp_fastopen_add_skb()
and also add remark on this case in the commit message.
v3: Add const modifier to the skb parameter in tcp_segs_in()
v2: Rework based on recent fix by Eric:
commit a9d99ce28e ("tcp: fix tcpi_segs_in after connection establishment")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Cc: Chris Rapier <rapier@psc.edu>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Marcelo Ricardo Leitner <mleitner@redhat.com>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
gcc points out code that is not indented the way it is
interpreted:
net/caif/cfpkt_skbuff.c: In function 'cfpkt_setlen':
net/caif/cfpkt_skbuff.c:289:4: error: statement is indented as if it were guarded by... [-Werror=misleading-indentation]
return cfpkt_getlen(pkt);
^~~~~~
net/caif/cfpkt_skbuff.c:286:3: note: ...this 'else' clause, but it is not
else
^~~~
It is clear from the context that not returning here would be
a bug, as we'd end up passing a negative length into a function
that takes a u16 length, so it is not missing curly braces
here, and I'm assuming that the indentation is the only part
that's wrong about it.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The syzkaller fuzzer hit the following use-after-free:
Call Trace:
[<ffffffff8175ea0e>] __asan_report_load8_noabort+0x3e/0x40 mm/kasan/report.c:295
[<ffffffff851cc31a>] __sys_recvmmsg+0x6fa/0x7f0 net/socket.c:2261
[< inline >] SYSC_recvmmsg net/socket.c:2281
[<ffffffff851cc57f>] SyS_recvmmsg+0x16f/0x180 net/socket.c:2270
[<ffffffff86332bb6>] entry_SYSCALL_64_fastpath+0x16/0x7a
arch/x86/entry/entry_64.S:185
And, as Dmitry rightly assessed, that is because we can drop the
reference and then touch it when the underlying recvmsg calls return
some packets and then hit an error, which will make recvmmsg to set
sock->sk->sk_err, oops, fix it.
Reported-and-Tested-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Kostya Serebryany <kcc@google.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Fixes: a2e2725541 ("net: Introduce recvmmsg socket syscall")
http://lkml.kernel.org/r/20160122211644.GC2470@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Expand headroom further in order to be able to fit the larger IPv6
header. Prior to this patch this caused a skb under panic for certain
tipc packets when using IPv6 UDP bearer(s).
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
