The Renesas RZN1 DMA IP is based on a DW core, with eg. an additional
dmamux register located in the system control area which can take up to
32 requests (16 per DMA controller). Each DMA channel can be wired to
two different peripherals.
We need two additional information from the 'dmas' property: the channel
(bit in the dmamux register) that must be accessed and the value of the
mux for this channel.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220427095653.91804-6-miquel.raynal@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The dmamux register is located within the system controller.
Without syscon, we need an extra helper in order to give write access to
this register to a dmamux driver.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20220427095653.91804-5-miquel.raynal@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Just like for the NAND controller that is also on this SoC, let's
provide a SoC generic and a more specific couple of compatibles for the
DMA controller.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20220427095653.91804-4-miquel.raynal@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This system controller contains several registers that have nothing to
do with the clock handling, like the DMA mux register. Describe this
part of the system controller as a subnode.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20220427095653.91804-3-miquel.raynal@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The Renesas RZN1 DMA IP is based on a DW core, with eg. an additional
dmamux register located in the system control area which can take up to
32 requests (16 per DMA controller). Each DMA channel can be wired to
two different peripherals.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20220427095653.91804-2-miquel.raynal@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
speakupmap.h was not actually intended to be source code, speakupmap.map
is.
This resurrects the makemapdata.c and genmap.c tools to generate
speakupmap.h automatically from the input and speakup headers, and the
speakupmap.map keyboard mapping source file.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Link: https://lore.kernel.org/r/20220515230358.ikwt2kspiwvv5cf4@begin
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As per the current implementation only single callback data gets saved per
event, driver is throwing an error if try to register multiple callback for
same event. So at time of unregistration of any event required things are
event details and callback handler as parameter of xlnx_unregister_event().
As part of adding support of multiple callbacks for same event also require
change in prototype of xlnx_unregister_event().
During unregistration of any events, now required things are event details,
callback handler and agent's private data as parameter of
xlnx_unregister_event().
Also modify the usage of xlnx_unregister_event() in xilinx/zynqmp_power.c
driver as per new implementation.
Signed-off-by: Abhyuday Godhasara <abhyuday.godhasara@xilinx.com>
Link: https://lore.kernel.org/r/20220427074803.19009-3-abhyuday.godhasara@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As per the current implementation of only single callback data gets
saved per event, driver is throwing an error if try to register multiple
callback for same event.
Add support of multiple callbacks data for same event. So agent can
register for same event with multiple callbacks. Here event management
driver will store the callbacks as list in Hash table entry for that event.
Here each callback data contain 2 element as callback handler and private
data of agent driver.
Signed-off-by: Abhyuday Godhasara <abhyuday.godhasara@xilinx.com>
Link: https://lore.kernel.org/r/20220427074803.19009-2-abhyuday.godhasara@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is another instance of incorrect use of list iterator and
checking it for NULL.
The list iterator value 'map' will *always* be set and non-NULL
by list_for_each_entry(), so it is incorrect to assume that the
iterator value will be NULL if the list is empty (in this case, the
check 'if (!map) {' will always be false and never exit as expected).
To fix the bug, use a new variable 'iter' as the list iterator,
while use the original variable 'map' as a dedicated pointer to
point to the found element.
Without this patch, Kernel crashes with below trace:
Unable to handle kernel access to user memory outside uaccess routines
at virtual address 0000ffff7fb03750
...
Call trace:
fastrpc_map_create+0x70/0x290 [fastrpc]
fastrpc_req_mem_map+0xf0/0x2dc [fastrpc]
fastrpc_device_ioctl+0x138/0xc60 [fastrpc]
__arm64_sys_ioctl+0xa8/0xec
invoke_syscall+0x48/0x114
el0_svc_common.constprop.0+0xd4/0xfc
do_el0_svc+0x28/0x90
el0_svc+0x3c/0x130
el0t_64_sync_handler+0xa4/0x130
el0t_64_sync+0x18c/0x190
Code: 14000016 f94000a5 eb05029f 54000260 (b94018a6)
---[ end trace 0000000000000000 ]---
Fixes: 5c1b97c7d7 ("misc: fastrpc: add support for FASTRPC_IOCTL_MEM_MAP/UNMAP")
Cc: stable@vger.kernel.org
Reported-by: Jan Jablonsky <jjablonsky@snapchat.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220518152353.13058-1-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
alcor_pci doesn't set driver data to NULL and clear pci master when
probe fails. Doesn't clear pci master from remove interface. Clearing
pci master is necessary to disable bus mastering and prevent DMAs after
driver removal.
Fix alcor_pci_probe() to set driver data to NULL and clear pci master
from its error path. Fix alcor_pci_remove() to clear pci master.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220517203630.45232-1-skhan@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We can get "failed to disable" clock_unprepare warnings on unbind at least
for the serial console device if the unbind is done before the device has
been idled.
As some devices are using deferred idle, we must check the status for
pending idle work to idle the device.
Fixes: 76f0f772e4 ("bus: ti-sysc: Improve handling for no-reset-on-init and no-idle-on-init")
Cc: Romain Naour <romain.naour@smile.fr>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20220512053021.61650-1-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kobject_init_and_add() takes reference even when it fails.
According to the doc of kobject_init_and_add()
If this function returns an error, kobject_put() must be called to
properly clean up the memory associated with the object.
Fix this issue by calling kobject_put().
Fixes: 948af1f0bb ("firmware: Basic dmi-sysfs support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220511071421.9769-1-linmq006@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The print function dev_err() is redundant because
platform_get_irq_byname() already prints an error.
Eliminate the follow coccicheck warning:
./drivers/slimbus/qcom-ctrl.c:514:2-9: line 514 is redundant because
platform_get_irq() already prints an error
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220510095205.337-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
platform_get_irq() returns non-zero IRQ number on success,
negative error number on failure.
And the doc of platform_get_irq() provides a usage example:
int irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
Fix the check of return value to catch errors correctly.
Fixes: ad7fcbc308 ("slimbus: qcom: Add Qualcomm Slimbus controller driver")
Cc: stable@vger.kernel.org
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220510095205.337-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the following coccicheck warning:
drivers/comedi/drivers.c:857:12-13: WARNING opportunity for min().
min() macro is defined in include/linux/minmax.h. It avoids multiple
evaluations of the arguments when non-constant and performs strict
type-checking.
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Link: https://lore.kernel.org/r/20220513071608.49047-1-guozhengkui@vivo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When COMPILED_SOURCE is set, running
make ARCH=x86_64 COMPILED_SOURCE=1 cscope tags
could throw the following errors:
scripts/tags.sh: line 98: /usr/bin/realpath: Argument list too long
cscope: no source files found
scripts/tags.sh: line 98: /usr/bin/realpath: Argument list too long
ctags: No files specified. Try "ctags --help".
This is most likely to happen when the kernel is configured to build a
large number of modules, which has the consequence of passing too many
arguments when calling 'realpath' in 'all_compiled_sources()'.
Let's improve this by invoking 'realpath' through 'xargs', which takes
care of properly limiting the argument list.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20220516234646.531208-1-cristian.ciocaltea@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The text "dual BSD/GPLv2 license" is somewhat ambiguous, and moving this
over to SPDX is overdue. This commit adds SPDX tags to the relevant
files and clarifies that it's GPLv2 only and 3-clause BSD. It also
removes the old text, so that the SPDX tags are the only source of the
information.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The RISC-V port supports the rv32i and rv64i base ISAs, but provides no
mechanism to run 32-bit userspace on 64-bit systems. This adds that
support, via the COMPAT framework. As the RISC-V ISAs (and uABIs) were
developed concurrently, the resulting compat support is mostly generic.
This includes a handful of cleanups to the generic compat infrastructure
to more cleanly support RISC-V, followed by the RISC-V implementation.
* palmer/riscv-compat:
riscv: compat: Add COMPAT Kbuild skeletal support
riscv: compat: ptrace: Add compat_arch_ptrace implement
riscv: compat: signal: Add rt_frame implementation
riscv: compat: vdso: Add setup additional pages implementation
riscv: compat: vdso: Add COMPAT_VDSO base code implementation
riscv: compat: Add hw capability check for elf
riscv: compat: Add elf.h implementation
riscv: compat: process: Add UXL_32 support in start_thread
riscv: compat: syscall: Add entry.S implementation
riscv: compat: syscall: Add compat_sys_call_table implementation
riscv: compat: Support TASK_SIZE for compat mode
riscv: compat: Add basic compat data type implementation
riscv: Fixup difference with defconfig
syscalls: compat: Fix the missing part for __SYSCALL_COMPAT
asm-generic: compat: Cleanup duplicate definitions
fs: stat: compat: Add __ARCH_WANT_COMPAT_STAT
arch: Add SYSVIPC_COMPAT for all architectures
compat: consolidate the compat_flock{,64} definition
uapi: always define F_GETLK64/F_SETLK64/F_SETLKW64 in fcntl.h
uapi: simplify __ARCH_FLOCK{,64}_PAD a little
Commit 9474be34a7 ("binder: add failed transaction logging info")
dereferences target_{proc,thread} after they have been potentially
freed by binder_proc_dec_tmpref() and binder_thread_dec_tmpref().
This patch delays the release of the two references after their last
usage. Fixes the following two errors reported by smatch:
drivers/android/binder.c:3562 binder_transaction() error: dereferencing freed memory 'target_proc'
drivers/android/binder.c:3563 binder_transaction() error: dereferencing freed memory 'target_thread'
Fixes: 9474be34a7 ("binder: add failed transaction logging info")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Todd Kjos <tkjos@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20220517185817.598872-1-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make sure we use unsigned format specifier %u for binder commands as
most of them are encoded above INT_MAX. This prevents negative values
when logging them as in the following case:
[ 211.895781] binder: 8668:8668 BR_REPLY 258949 0:0, cmd -2143260157 size 0-0 ptr 0000006e766a8000-0000006e766a8000
Acked-by: Todd Kjos <tkjos@google.com>
Acked-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20220509231901.3852573-1-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a helper to check if the character is a flow control one. This
rework prepares for adding lookahead done check cleanly to
n_tty_receive_char_flow_ctrl() between n_tty_is_char_flow_ctrl() and
the actions taken on the flow control characters.
No functional changes intended.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220426144935.54893-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Only CS7 and CS8 seem supported but CSIZE was not sanitized in termios
c_cflag. The driver sets 7 bits whenever data_bits is not 8 so default
to CS7 when CSIZE is not CS8.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220519081808.3776-10-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add CSIZE sanitization for unsupported CSIZE configurations. In
addition, if parity is asked for but CSx was unsupported, the sensible
result is CS8+parity which requires setting USART_CR1_M0 like with 9
bits.
Incorrect CSIZE results in miscalculation of the frame bits in
tty_get_char_size() or in its predecessor where the roughly the same
code is directly within uart_update_timeout().
Fixes: c8a9d04394 (serial: stm32: fix word length configuration)
Cc: Erwan Le Ray <erwan.leray@st.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220519081808.3776-9-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Only CS7 and CS8 seem supported but CSIZE is not sanitized from CS5 or
CS6 to CS8. In addition, ASC_CTL_MODE_7BIT_PAR suggests that CS7 has
to have parity, thus add PARENB.
Incorrect CSIZE results in miscalculation of the frame bits in
tty_get_char_size() or in its predecessor where the roughly the same
code is directly within uart_update_timeout().
Fixes: c4b0585607 (serial:st-asc: Add ST ASC driver.)
Cc: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220519081808.3776-8-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Only CS8 is supported but CSIZE was not sanitized to CS8.
Set CSIZE correctly so that userspace knows the effective value.
Incorrect CSIZE also results in miscalculation of the frame bits in
tty_get_char_size() or in its predecessor where the roughly the same
code is directly within uart_update_timeout().
Similarly, INPCK, PARMRK, and BRKINT are reported textually unsupported
but were not cleared in termios c_iflag which is the machine-readable
format.
Fixes: 45c054d081 (tty: serial: add driver for the SiFive UART)
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220519081808.3776-7-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Only CS7 and CS8 seem supported but CSIZE is not sanitized from
CS5 or CS6 to CS8.
Set CSIZE correctly so that userspace knows the effective value.
Incorrect CSIZE also results in miscalculation of the frame bits in
tty_get_char_size() or in its predecessor where the roughly the same
code is directly within uart_update_timeout().
Fixes: 1da177e4c3 (Linux-2.6.12-rc2)
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220519081808.3776-6-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Only CS7 and CS8 are supported but CSIZE is not sanitized with
CS5 or CS6 to CS8.
Set CSIZE correctly so that userspace knows the effective value.
Incorrect CSIZE also results in miscalculation of the frame bits in
tty_get_char_size() or in its predecessor where the roughly the same
code is directly within uart_update_timeout().
Fixes: 1da177e4c3 (Linux-2.6.12-rc2)
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220519081808.3776-5-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Only CS7 and CS8 are supported but CSIZE is not sanitized after
fallthrough from CS5 or CS6 to CS7.
Set CSIZE correctly so that userspace knows the effective value.
Incorrect CSIZE also results in miscalculation of the frame bits in
tty_get_char_size() or in its predecessor where the roughly the same
code is directly within uart_update_timeout().
Fixes: c10b13325c (tty: serial: Add RDA8810PL UART driver)
Cc: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220519081808.3776-4-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Only CS7 and CS8 seem supported but CSIZE is not sanitized to CS8 in
the default: block.
Set CSIZE correctly so that userspace knows the effective value.
Incorrect CSIZE also results in miscalculation of the frame bits in
tty_get_char_size() or in its predecessor where the roughly the same
code is directly within uart_update_timeout().
Fixes: 5930cb3511 (serial: driver for Conexant Digicolor USART)
Acked-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220519081808.3776-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
BRKINT is within c_iflag rather than c_cflag.
Fixes: ea017f5853 (tty: serial: uartlite: Prevent changing fixed parameters)
Reviewed-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220519081808.3776-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/tty/serial/cpm_uart/cpm_uart_core.c: In function ‘cpm_uart_init_port’:
drivers/tty/serial/cpm_uart/cpm_uart_core.c:1251:7: error: ‘udbg_port’ undeclared (first use in this function); did you mean ‘uart_port’?
if (!udbg_port)
^~~~~~~~~
uart_port
commit d142585bce leave this corner, wrap it with #ifdef block
Fixes: d142585bce ("serial: cpm_uart: Protect udbg definitions by CONFIG_SERIAL_CPM_CONSOLE")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20220518135452.39480-1-yuehaibing@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For the case of console_suspend disabled, if back to back suspend/resume
test is executed, at the end of test, sometimes console would appear to
be frozen not responding to input. This would happen because, during
resume, rx transactions can come in before system is ready, malfunction
of rx happens in turn resulting in console appearing to be stuck.
Do a stop_rx in suspend sequence to prevent this.
Signed-off-by: Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com>
Link: https://lore.kernel.org/r/1652692810-31148-1-git-send-email-quic_vnivarth@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace the UART frequency table 'root_freq[]' with logic around
clk_round_rate() so that SoC details like the available clk frequencies
can change and this driver still works. This reduces tight coupling
between this UART driver and the SoC clk driver because we no longer
have to update the 'root_freq[]' array for new SoCs. Instead the driver
determines the available frequencies at runtime.
Signed-off-by: Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com>
Link: https://lore.kernel.org/r/1652697510-30543-1-git-send-email-quic_vnivarth@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The RZ/V2M SoC has an additional clock to access the registers. The HW
manual says this clock should not be touched as it is used by the
"ISP Firmware".
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Link: https://lore.kernel.org/r/20220512072649.7879-1-phil.edworthy@renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
SER_RS485_RTS_ON_SEND and SER_RS485_RTS_AFTER_SEND relate to behavior
within RS485 operation. The driver checks if they have the same value
which is not possible to realize with the hardware. The check is taken
regardless of SER_RS485_ENABLED flag and -EINVAL is returned when the
check fails, which creates problems.
This check makes it unnecessarily complicated to turn RS485 mode off as
simple zeroed serial_rs485 struct will trigger that equal values check.
In addition, the driver itself memsets its rs485 structure to zero when
RS485 is disabled but if userspace would try to make an TIOCSRS485
ioctl() call with the very same struct, it would end up failing with
-EINVAL which doesn't make much sense.
Resolve the problem by moving the check inside SER_RS485_ENABLED block.
Fixes: 7ecc77011c ("serial: 8250_fintek: Return -EINVAL on invalid configuration")
Cc: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/035c738-8ea5-8b17-b1d7-84a7b3aeaa51@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It was found that some MediaTek SoCs are incompatible with this
change. Also, this register was mistakenly understood as it was
related to the 16550A register layout selection but, at least
on some IPs, if not all, it's related to something else unknown.
This reverts commit 6f81fdded0.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Fixes: 6f81fdded0 ("serial: 8250_mtk: Make sure to select the right FEATURE_SEL")
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Link: https://lore.kernel.org/r/20220510122620.150342-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
__msm_console_write() assumes that interrupts are disabled, but
with threaded console printers it is possible that the write()
callback of the console is called with interrupts enabled.
Explicitly disable interrupts using local_irq_save() to preserve
the assumed context.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Link: https://lore.kernel.org/r/20220506213324.470461-1-john.ogness@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The uart_ops startup() callback is called without interrupts
disabled and without port->lock locked, relatively late during the
boot process (from the call path of console_on_rootfs()). If the
device is a console, it was already previously registered and could
be actively printing messages.
Since the startup() callback is reading/writing registers used by
the console write() callback (AML_UART_CONTROL), its access must
be synchronized using the port->lock. Currently it is not.
The startup() callback is the only function that explicitly enables
interrupts. Without the synchronization, it is possible that
interrupts become accidentally permanently disabled.
CPU0 CPU1
meson_serial_console_write meson_uart_startup
-------------------------- ------------------
spin_lock(port->lock)
val = readl(AML_UART_CONTROL)
uart_console_write()
writel(INT_EN, AML_UART_CONTROL)
writel(val, AML_UART_CONTROL)
spin_unlock(port->lock)
Add port->lock synchronization to meson_uart_startup() to avoid
racing with meson_serial_console_write().
Also add detailed comments to meson_uart_reset() explaining why it
is *not* using port->lock synchronization.
Link: https://lore.kernel.org/lkml/2a82eae7-a256-f70c-fd82-4e510750906e@samsung.com
Fixes: ff7693d079 ("ARM: meson: serial: add MesonX SoC on-chip uart driver")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Link: https://lore.kernel.org/r/20220508103547.626355-1-john.ogness@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Slightly simplify ->probe() and drop a few goto labels by using
devm_add_action_or_reset() for clock and reset cleanup.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220509172129.37770-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The of_irq.h and of_platform.h are not used by the driver. On the
other hand, the mod_devicetable.h missed. Drop the former two and
add the latter one.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220509161911.37164-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use B0 to check zero baudrate rather than literal 0.
While at it, remove extra parenthesis around CBAUD.
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220513082906.11096-6-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
if (termios->c_cflag & CRTSCTS) guarantees that CRTSCTS is not ever set
in the else block so clearing it is unnecessary.
While at it, remove also one pair of extra parenthesis.
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220513082906.11096-5-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
IBSHIFT is defined by all architectures since commit d0ffb805b7
("arch/alpha, termios: implement BOTHER, IBSHIFT and termios2").
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220513082906.11096-4-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
BOTHER is defined by all architectures since commit d0ffb805b7
("arch/alpha, termios: implement BOTHER, IBSHIFT and termios2").
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220513082906.11096-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
