The evsel->name may have a different format for a topdown event, a pure
topdown name (e.g., topdown-fe-bound), or a PMU name + a topdown name
(e.g., cpu/topdown-fe-bound/). The cpu/topdown-fe-bound/ kind format
isn't supported by the arch_evlist__leader(). This format is a very
common format for a hybrid platform, which requires specifying the PMU
name for each event.
Without the patch,
$ perf stat -e '{instructions,slots,cpu/topdown-fe-bound/}' -a sleep 1
Performance counter stats for 'system wide':
<not counted> instructions
<not counted> slots
<not supported> cpu/topdown-fe-bound/
1.003482041 seconds time elapsed
Some events weren't counted. Try disabling the NMI watchdog:
echo 0 > /proc/sys/kernel/nmi_watchdog
perf stat ...
echo 1 > /proc/sys/kernel/nmi_watchdog
The events in group usually have to be from the same PMU. Try reorganizing the group.
With the patch,
$ perf stat -e '{instructions,slots,cpu/topdown-fe-bound/}' -a sleep 1
Performance counter stats for 'system wide':
157,383,996 slots
25,011,711 instructions
27,441,686 cpu/topdown-fe-bound/
1.003530890 seconds time elapsed
Fixes: bc355822f0 ("perf parse-events: Move slots only with topdown")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220518143900.1493980-4-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If any member in a group has a different cpu mask than the other
members, the current perf stat disables group. when the perf metrics
topdown events are part of the group, the below <not supported> error
will be triggered.
$ perf stat -e "{slots,topdown-retiring,uncore_imc_free_running_0/dclk/}" -a sleep 1
WARNING: grouped events cpus do not match, disabling group:
anon group { slots, topdown-retiring, uncore_imc_free_running_0/dclk/ }
Performance counter stats for 'system wide':
141,465,174 slots
<not supported> topdown-retiring
1,605,330,334 uncore_imc_free_running_0/dclk/
The perf metrics topdown events must always be grouped with a slots
event as leader.
Factor out evsel__remove_from_group() to only remove the regular events
from the group.
Remove evsel__must_be_in_group(), since no one use it anymore.
With the patch, the topdown events aren't broken from the group for the
splitting.
$ perf stat -e "{slots,topdown-retiring,uncore_imc_free_running_0/dclk/}" -a sleep 1
WARNING: grouped events cpus do not match, disabling group:
anon group { slots, topdown-retiring, uncore_imc_free_running_0/dclk/ }
Performance counter stats for 'system wide':
346,110,588 slots
124,608,256 topdown-retiring
1,606,869,976 uncore_imc_free_running_0/dclk/
1.003877592 seconds time elapsed
Fixes: a9a1790247 ("perf stat: Ensure group is defined on top of the same cpu mask")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220518143900.1493980-3-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The patch ("perf evlist: Keep topdown counters in weak group") fixes the
perf metrics topdown event issue when the topdown events are in a weak
group on a non-hybrid platform. However, it doesn't work for the hybrid
platform.
$./perf stat -e '{cpu_core/slots/,cpu_core/topdown-bad-spec/,
cpu_core/topdown-be-bound/,cpu_core/topdown-fe-bound/,
cpu_core/topdown-retiring/,cpu_core/branch-instructions/,
cpu_core/branch-misses/,cpu_core/bus-cycles/,cpu_core/cache-misses/,
cpu_core/cache-references/,cpu_core/cpu-cycles/,cpu_core/instructions/,
cpu_core/mem-loads/,cpu_core/mem-stores/,cpu_core/ref-cycles/,
cpu_core/cache-misses/,cpu_core/cache-references/}:W' -a sleep 1
Performance counter stats for 'system wide':
751,765,068 cpu_core/slots/ (84.07%)
<not supported> cpu_core/topdown-bad-spec/
<not supported> cpu_core/topdown-be-bound/
<not supported> cpu_core/topdown-fe-bound/
<not supported> cpu_core/topdown-retiring/
12,398,197 cpu_core/branch-instructions/ (84.07%)
1,054,218 cpu_core/branch-misses/ (84.24%)
539,764,637 cpu_core/bus-cycles/ (84.64%)
14,683 cpu_core/cache-misses/ (84.87%)
7,277,809 cpu_core/cache-references/ (77.30%)
222,299,439 cpu_core/cpu-cycles/ (77.28%)
63,661,714 cpu_core/instructions/ (84.85%)
0 cpu_core/mem-loads/ (77.29%)
12,271,725 cpu_core/mem-stores/ (77.30%)
542,241,102 cpu_core/ref-cycles/ (84.85%)
8,854 cpu_core/cache-misses/ (76.71%)
7,179,013 cpu_core/cache-references/ (76.31%)
1.003245250 seconds time elapsed
A hybrid platform has a different PMU name for the core PMUs, while
the current perf hard code the PMU name "cpu".
The evsel->pmu_name can be used to replace the "cpu" to fix the issue.
For a hybrid platform, the pmu_name must be non-NULL. Because there are
at least two core PMUs. The PMU has to be specified.
For a non-hybrid platform, the pmu_name may be NULL. Because there is
only one core PMU, "cpu". For a NULL pmu_name, we can safely assume that
it is a "cpu" PMU.
In case other PMUs also define the "slots" event, checking the PMU type
as well.
With the patch,
$ perf stat -e '{cpu_core/slots/,cpu_core/topdown-bad-spec/,
cpu_core/topdown-be-bound/,cpu_core/topdown-fe-bound/,
cpu_core/topdown-retiring/,cpu_core/branch-instructions/,
cpu_core/branch-misses/,cpu_core/bus-cycles/,cpu_core/cache-misses/,
cpu_core/cache-references/,cpu_core/cpu-cycles/,cpu_core/instructions/,
cpu_core/mem-loads/,cpu_core/mem-stores/,cpu_core/ref-cycles/,
cpu_core/cache-misses/,cpu_core/cache-references/}:W' -a sleep 1
Performance counter stats for 'system wide':
766,620,266 cpu_core/slots/ (84.06%)
73,172,129 cpu_core/topdown-bad-spec/ # 9.5% bad speculation (84.06%)
193,443,341 cpu_core/topdown-be-bound/ # 25.0% backend bound (84.06%)
403,940,929 cpu_core/topdown-fe-bound/ # 52.3% frontend bound (84.06%)
102,070,237 cpu_core/topdown-retiring/ # 13.2% retiring (84.06%)
12,364,429 cpu_core/branch-instructions/ (84.03%)
1,080,124 cpu_core/branch-misses/ (84.24%)
564,120,383 cpu_core/bus-cycles/ (84.65%)
36,979 cpu_core/cache-misses/ (84.86%)
7,298,094 cpu_core/cache-references/ (77.30%)
227,174,372 cpu_core/cpu-cycles/ (77.31%)
63,886,523 cpu_core/instructions/ (84.87%)
0 cpu_core/mem-loads/ (77.31%)
12,208,782 cpu_core/mem-stores/ (77.31%)
566,409,738 cpu_core/ref-cycles/ (84.87%)
23,118 cpu_core/cache-misses/ (76.71%)
7,212,602 cpu_core/cache-references/ (76.29%)
1.003228667 seconds time elapsed
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220518143900.1493980-2-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Flushing system-wide workqueues is dangerous and will be forbidden.
Replace system_wq with local isert_login_wq.
Link: https://lore.kernel.org/r/fbe5e9a8-0110-0c22-b7d6-74d53948d042@I-love.SAKURA.ne.jp
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Kernel doc validator is not happy:
pinctrl-intel.c:865: warning: No description found for return value of 'intel_gpio_to_pin'
pinctrl-intel.c:904: warning: No description found for return value of 'intel_pin_to_gpio'
2 warnings
Add return sections to the kernel documentation of the above mentioned
functions.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
To eventually get rid of all legacy drivers convert this driver to the
modern world implementing .apply().
The size check for state->period is moved to .apply() to make sure that
the values of state->duty_cycle and state->period are passed to
pwm_samsung_config without change while they are discarded to int.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Use if and else instead of if(A) and if (!A).
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
From the kernel point of view there are only few ops that needs to be exposed:
Hi,
SOF is using dma-trace (or dtrace) as a firmware tracing method, which is only
supported with IPC3 and it is not applicable for IPC4.
Currently the dtrace is 'open managed' regardless of IPC version (we do force
disable it for IPC4, but the dtrace calls remain in place).
From the kernel point of view there are only few ops that needs to be exposed
by the firmware tracing support and everything else is IPC private, should not
be known by the core.
This series converts the current dma-trace as ipc3 specific firmware tracing
sub-component and moves all private data out from generic code.
Regards,
Peter
---
Peter Ujfalusi (8):
ASoC: SOF: Introduce IPC independent ops for firmware tracing support
ASoC: SOF: Rename dtrace_is_supported flag to fw_trace_is_supported
ASoC: SOF: Clone the trace code to ipc3-dtrace as fw_tracing
implementation
ASoC: SOF: Switch to IPC generic firmware tracing
ASoC: SOF: ipc3-dtrace: Move host ops wrappers from generic header to
private
ASoC: SOF: Modify the host trace_init parameter list to include dmab
ASoC: SOF: Introduce opaque storage of private data for firmware
tracing
ASoC: SOF: ipc3-dtrace: Move dtrace related variables local from
sof_dev
sound/soc/sof/Makefile | 1 +
sound/soc/sof/amd/acp-trace.c | 4 +-
sound/soc/sof/amd/acp.h | 2 +-
sound/soc/sof/core.c | 13 +-
sound/soc/sof/debug.c | 2 +-
sound/soc/sof/intel/hda-dsp.c | 2 +-
sound/soc/sof/intel/hda-trace.c | 4 +-
sound/soc/sof/intel/hda.h | 2 +-
sound/soc/sof/ipc.c | 6 +
sound/soc/sof/ipc3-dtrace.c | 649 ++++++++++++++++++++++++++++++++
sound/soc/sof/ipc3-priv.h | 38 ++
sound/soc/sof/ipc3.c | 3 +-
sound/soc/sof/ops.c | 2 +-
sound/soc/sof/ops.h | 26 --
sound/soc/sof/pm.c | 8 +-
sound/soc/sof/sof-priv.h | 53 +--
sound/soc/sof/trace.c | 621 ++----------------------------
17 files changed, 767 insertions(+), 669 deletions(-)
create mode 100644 sound/soc/sof/ipc3-dtrace.c
--
2.36.1
Renamed hte dt binding directory to timestamp according review comment.
Addressed minor comment about having HTE acronym first in the common dt
binding document.
The change reflects above renaming in MAINTAINERS files too.
Signed-off-by: Dipen Patel <dipenp@nvidia.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The "free_name" variable is sometimes used without being initialized.
Fixes: 31ab09b421 ("drivers: Add hardware timestamp engine (HTE) subsystem")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Dipen Patel <dipenp@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Stat events can come from disk and so need a degree of validation. They
contain a CPU which needs looking up via CPU map to access a counter.
Add the CPU to index translation, alongside validity checking.
Discussion thread:
https://lore.kernel.org/linux-perf-users/CAP-5=fWQR=sCuiSMktvUtcbOLidEpUJLCybVF6=BRvORcDOq+g@mail.gmail.com/
Fixes: 7ac0089d13 ("perf evsel: Pass cpu not cpu map index to synthesize")
Reported-by: Michael Petlan <mpetlan@redhat.com>
Suggested-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Dave Marchevsky <davemarchevsky@fb.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Lv Ruyi <lv.ruyi@zte.com.cn>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: netdev@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: Yonghong Song <yhs@fb.com>
Link: http://lore.kernel.org/lkml/20220519032005.1273691-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
- set non-mdts limits in nvme_scan_work (Chaitanya Kulkarni)
- add support for TP4084 - Time-to-Ready Enhancements (me)
-----BEGIN PGP SIGNATURE-----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=6fdL
-----END PGP SIGNATURE-----
Merge tag 'nvme-5.19-2022-05-19' of git://git.infradead.org/nvme into for-5.19/drivers
Pull NVMe updates from Christoph:
"nvme updates for Linux 5.19
- set non-mdts limits in nvme_scan_work (Chaitanya Kulkarni)
- add support for TP4084 - Time-to-Ready Enhancements (me)"
* tag 'nvme-5.19-2022-05-19' of git://git.infradead.org/nvme:
nvme: set non-mdts limits in nvme_scan_work
nvme: add support for TP4084 - Time-to-Ready Enhancements
Avi Kivity reported a problem where the __weak
btf__load_from_kernel_by_id() in tools/perf/util/bpf-event.c was being
used and it called btf__get_from_id() in tools/lib/bpf/btf.c that in
turn called back to btf__load_from_kernel_by_id(), resulting in an
endless loop.
Fix this by adding a feature test to check if
btf__load_from_kernel_by_id() is available when building perf with
LIBBPF_DYNAMIC=1, and if not then provide the fallback to the old
btf__get_from_id(), that doesn't call back to btf__load_from_kernel_by_id()
since at that time it didn't exist at all.
Tested on Fedora 35 where we have libbpf-devel 0.4.0 with LIBBPF_DYNAMIC
where we don't have btf__load_from_kernel_by_id() and thus its feature
test fail, not defining HAVE_LIBBPF_BTF__LOAD_FROM_KERNEL_BY_ID:
$ cat /tmp/build/perf-urgent/feature/test-libbpf-btf__load_from_kernel_by_id.make.output
test-libbpf-btf__load_from_kernel_by_id.c: In function ‘main’:
test-libbpf-btf__load_from_kernel_by_id.c:6:16: error: implicit declaration of function ‘btf__load_from_kernel_by_id’ [-Werror=implicit-function-declaration]
6 | return btf__load_from_kernel_by_id(20151128, NULL);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
$
$ nm /tmp/build/perf-urgent/perf | grep btf__load_from_kernel_by_id
00000000005ba180 T btf__load_from_kernel_by_id
$
$ objdump --disassemble=btf__load_from_kernel_by_id -S /tmp/build/perf-urgent/perf
/tmp/build/perf-urgent/perf: file format elf64-x86-64
<SNIP>
00000000005ba180 <btf__load_from_kernel_by_id>:
#include "record.h"
#include "util/synthetic-events.h"
#ifndef HAVE_LIBBPF_BTF__LOAD_FROM_KERNEL_BY_ID
struct btf *btf__load_from_kernel_by_id(__u32 id)
{
5ba180: 55 push %rbp
5ba181: 48 89 e5 mov %rsp,%rbp
5ba184: 48 83 ec 10 sub $0x10,%rsp
5ba188: 64 48 8b 04 25 28 00 mov %fs:0x28,%rax
5ba18f: 00 00
5ba191: 48 89 45 f8 mov %rax,-0x8(%rbp)
5ba195: 31 c0 xor %eax,%eax
struct btf *btf;
#pragma GCC diagnostic push
#pragma GCC diagnostic ignored "-Wdeprecated-declarations"
int err = btf__get_from_id(id, &btf);
5ba197: 48 8d 75 f0 lea -0x10(%rbp),%rsi
5ba19b: e8 a0 57 e5 ff call 40f940 <btf__get_from_id@plt>
5ba1a0: 89 c2 mov %eax,%edx
#pragma GCC diagnostic pop
return err ? ERR_PTR(err) : btf;
5ba1a2: 48 98 cltq
5ba1a4: 85 d2 test %edx,%edx
5ba1a6: 48 0f 44 45 f0 cmove -0x10(%rbp),%rax
}
<SNIP>
Fixes: 218e7b775d ("perf bpf: Provide a weak btf__load_from_kernel_by_id() for older libbpf versions")
Reported-by: Avi Kivity <avi@scylladb.com>
Link: https://lore.kernel.org/linux-perf-users/f0add43b-3de5-20c5-22c4-70aff4af959f@scylladb.com
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/linux-perf-users/YobjjFOblY4Xvwo7@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Validation of signed input should be done before casting to unsigned int.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Suggested-by: Mark Brown <broonie@kernel.org>
Fixes: 2fbe467bcb ("ASoC: max98090: Reject invalid values in custom control put()")
Link: https://lore.kernel.org/r/1652999486-29653-1-git-send-email-khoroshilov@ispras.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
Add two new opcodes that userspace can use for admin commands:
NVME_URING_CMD_ADMIN : non-vectroed
NVME_URING_CMD_ADMIN_VEC : vectored variant
Wire up support when these are issued on controller node(/dev/nvmeX).
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220520090630.70394-3-joshi.k@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Factor out a helper consolidating the error checks, and fix typo in a
comment too. This is in preparation to support admin commands on this
path.
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220520090630.70394-2-joshi.k@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We get new interesting formating with clang-format greater or equal to 6
as stated in the removed comments. Miguel Ojeda suggested to even move
the minimal clang-format version to 11, which is the minimum LLVM
supported at the moment [1].
Automatically updated with:
sed -i 's/^\(\s*\)#\(\S*\s\+\S*\) # Unknown to clang-format.*/\1\2/' .clang-format
Link: https://lore.kernel.org/r/CANiq72nLOfmEt-CZBmm2ouEB_x6Jm9ggDVFCVJxYxKw7O0LTzQ@mail.gmail.com [1]
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Tom Rix <trix@redhat.com>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Link: https://lore.kernel.org/r/20220506160106.522341-3-mic@digikod.net
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add tools/ to the shell fragment generating the for_each list and update
it. This is useful to format files in the tools directory (e.g.
selftests) with the same coding style as the kernel.
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Tom Rix <trix@redhat.com>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Link: https://lore.kernel.org/r/20220506160106.522341-2-mic@digikod.net
[Reworded and rebased on top of previous commits]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Convert the rk808 bindings into yaml format. clock-output-names varies
in maxItems depending on whether or not the clock-cells is 0 or 1. For
the rk805, rk809, and rk817. This preserves behavior with the existing
driver handling setting the clock for these specific PMICs. When this
driver is corrected and the devicetrees updated this logic can be
removed (since the rk805, rk808, and rk817 only have one actual clock).
Note this patch was previously sent as a series, all of the patches in
the series except this one have been committed to mainline.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220519161731.1168-1-macroalpha82@gmail.com
This avoids differences when different people run the command,
which is relevant for our use case, e.g.:
$ LC_ALL=en_US.UTF-8 sort test
ata_for_each_link
__ata_qc_for_each
ata_qc_for_each
$ LC_ALL=C sort test
__ata_qc_for_each
ata_for_each_link
ata_qc_for_each
Link: https://lore.kernel.org/lkml/CANiq72=7=ZpAObWRmposOmnyZ8XR_eNHCBtA3bu3fusmcPUwDA@mail.gmail.com/
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
* Print offset instead of page number for bad blocks
Raw NAND controller drivers:
* Cadence: Fix possible null-ptr-deref in cadence_nand_dt_probe()
* CS553X: simplify the return expression of cs553x_write_ctrl_byte()
* Davinci: Remove redundant unsigned comparison to zero
* Denali: Use managed device resources
* GPMI:
- Add large oob bch setting support
- Rename the variable ecc_chunk_size
- Uninline the gpmi_check_ecc function
- Add strict ecc strength check
- Refactor BCH geometry settings function
* Intel: Fix possible null-ptr-deref in ebu_nand_probe()
* MPC5121: Check before clk_disable_unprepare() not needed
* Mtk:
- MTD_NAND_ECC_MEDIATEK should depend on ARCH_MEDIATEK
- Also parse the default nand-ecc-engine property if available
- Make mtk_ecc.c a separated module
* OMAP ELM:
- Convert the bindings to yaml
- Describe the bindings for AM64 ELM
- Add support for its compatible
* Renesas: Use runtime PM instead of the raw clock API and update the
bindings accordingly
* Rockchip: Check before clk_disable_unprepare() not needed
* TMIO: Check return value after calling platform_get_resource()
Raw NAND chip driver:
* Kioxia: Add support for TH58NVG3S0HBAI4 and TC58NVG0S3HTA00
SPI-NAND chip drivers:
* Gigadevice:
- Add support for:
- GD5FxGM7xExxG
- GD5F{2,4}GQ5xExxG
- GD5F1GQ5RExxG
- GD5FxGQ4xExxG
- Fix Quad IO for GD5F1GQ5UExxG
* XTX: Add support for XT26G0xA
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmKD51AACgkQJWrqGEe9
VoQJ8AgAo8qjO5QQmd76v1q1Regxxl7RsH7hr7r9gJfgTwzhQC/xIyTiorcVPG7B
UDNu4Dwe3OAPbmU54TQNS/AMQkgHGMcIRTVut8+oL+ZnjYl+gv261GxmsfxaK/Hu
Vvvq9X0iyaKpZfyq3uksbsxiXbwMn4fHT7Reaimc9Thw+XKD7AcYWCuFb9GAWfaf
XQUVLg6y4Qk4BR9ZpYAx2v5FH4amJV9RKKTIqiymwcjnBZjYOI29wgKwY1hX+3bm
2Wu4wcccWhDzlV0Casf/hIGBydKx3omV+cJHLtmx7s+dqPvYSUGuvR2nbq5wuMqp
ZcAYeRhGEAYMYcMB/QuKmh4g/Js26w==
=QyqB
-----END PGP SIGNATURE-----
Merge tag 'nand/for-5.19' into mtd/next
NAND core:
* Print offset instead of page number for bad blocks
Raw NAND controller drivers:
* Cadence: Fix possible null-ptr-deref in cadence_nand_dt_probe()
* CS553X: simplify the return expression of cs553x_write_ctrl_byte()
* Davinci: Remove redundant unsigned comparison to zero
* Denali: Use managed device resources
* GPMI:
- Add large oob bch setting support
- Rename the variable ecc_chunk_size
- Uninline the gpmi_check_ecc function
- Add strict ecc strength check
- Refactor BCH geometry settings function
* Intel: Fix possible null-ptr-deref in ebu_nand_probe()
* MPC5121: Check before clk_disable_unprepare() not needed
* Mtk:
- MTD_NAND_ECC_MEDIATEK should depend on ARCH_MEDIATEK
- Also parse the default nand-ecc-engine property if available
- Make mtk_ecc.c a separated module
* OMAP ELM:
- Convert the bindings to yaml
- Describe the bindings for AM64 ELM
- Add support for its compatible
* Renesas: Use runtime PM instead of the raw clock API and update the
bindings accordingly
* Rockchip: Check before clk_disable_unprepare() not needed
* TMIO: Check return value after calling platform_get_resource()
Raw NAND chip driver:
* Kioxia: Add support for TH58NVG3S0HBAI4 and TC58NVG0S3HTA00
SPI-NAND chip drivers:
* Gigadevice:
- Add support for:
- GD5FxGM7xExxG
- GD5F{2,4}GQ5xExxG
- GD5F1GQ5RExxG
- GD5FxGQ4xExxG
- Fix Quad IO for GD5F1GQ5UExxG
* XTX: Add support for XT26G0xA
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
- Read back written SR value to make sure the write was done correctly.
- Introduce a common function for Read ID that manufacturer drivers can
use to verify the Octal DTR switch worked correctly.
- Add helpers for read/write any register commands so manufacturer
drivers don't open code it every time.
- Clarify rdsr dummy cycles documentation.
- Add debugfs entry to expose internal flash parameters and state.
SPI NOR manufacturer drivers changes:
- Add support for Winbond W25Q512NW-IM, and Eon EN25QH256A.
- Move spi_nor_write_ear() to Winbond module since only Winbond flashes
use it.
- Rework Micron and Cypress Octal DTR enable methods to improve
readability.
- Use the common Read ID function to verify switch to Octal DTR mode for
Micron and Cypress flashes.
- Skip polling status on volatile register writes for Micron and Cypress
flashes since the operation is instant.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQTlUWNzXGEo3bFmyIR4drqP028CQUCYoH1/QAKCRAR4drqP028
CXQeAP9hAfNGV55cOsd+z+3+xOxKeAYN/PC7UmXSvFgJZKYEqgEA/UF+SwsrOTyd
x+5UwNSOvrUX404j6ROP0kH4/kzARAY=
=Krne
-----END PGP SIGNATURE-----
Merge tag 'spi-nor/for-5.19' into mtd/next
SPI NOR core changes:
- Read back written SR value to make sure the write was done correctly.
- Introduce a common function for Read ID that manufacturer drivers can
use to verify the Octal DTR switch worked correctly.
- Add helpers for read/write any register commands so manufacturer
drivers don't open code it every time.
- Clarify rdsr dummy cycles documentation.
- Add debugfs entry to expose internal flash parameters and state.
SPI NOR manufacturer drivers changes:
- Add support for Winbond W25Q512NW-IM, and Eon EN25QH256A.
- Move spi_nor_write_ear() to Winbond module since only Winbond flashes
use it.
- Rework Micron and Cypress Octal DTR enable methods to improve
readability.
- Use the common Read ID function to verify switch to Octal DTR mode for
Micron and Cypress flashes.
- Skip polling status on volatile register writes for Micron and Cypress
flashes since the operation is instant.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Re-run the shell fragment that generated the original list.
This brings it up to date, so that the next patches that tweak it
further are more clear on what they change.
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
For EABI stack unwinding, when loading .ko module
the EXIDX sections will be added to a unwind_table list.
However not all EXIDX sections are added because EXIDX
sections are searched by hardcoded section names.
For functions in other sections such as .ref.text
or .kprobes.text, gcc generates seprated EXIDX sections
(such as .ARM.exidx.ref.text or .ARM.exidx.kprobes.text).
These extra EXIDX sections are not loaded, so when unwinding
functions in these sections, we will failed with:
unwind: Index not found xxx
To fix that, I refactor the code for searching and adding
EXIDX sections:
- Check section type to search EXIDX tables (0x70000001)
instead of strcmp() the hardcoded names. Then find the
corresponding text sections by their section names.
- Add a unwind_table list in module->arch to save their own
unwind_table instead of the fixed-lenth array.
- Save .ARM.exidx.init.text section ptr, because it should
be cleaned after module init.
Now all EXIDX sections of .ko can be added correctly.
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Enable the workaround for the 764319 Cortex A-9 erratum.
CP14 read accesses to the DBGPRSR and DBGOSLSR registers generate an
unexpected Undefined Instruction exception when the DBGSWENABLE external
pin is set to 0, even when the CP14 accesses are performed from a
privileged mode. The work around catches the exception in a way
the kernel does not stop execution with the use of undef_hook. This
has been found to effect the HPE GXP SoC.
Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
The assembler does not permit 'LDR PC, <sym>' when the symbol lives in a
different section, which is why we have been relying on rather fragile
open-coded arithmetic to load the address of the vector_swi routine into
the program counter using a single LDR instruction in the SWI slot in
the vector table. The literal was moved to a different section to in
commit 19accfd373 ("ARM: move vector stubs") to ensure that the
vector stubs page does not need to be mapped readable for user space,
which is the case for the vector page itself, as it carries the kuser
helpers as well.
So the cross-section literal load is open-coded, and this relies on the
address of vector_swi to be at the very start of the vector stubs page,
and we won't notice if we got it wrong until booting the kernel and see
it break. Fortunately, it was guaranteed to break, so this was fragile
but not problematic.
Now that we have added two other variants of the vector table, we have 3
occurrences of the same trick, and so the size of our ISA/compiler/CPU
validation space has tripled, in a way that may cause regressions to only
be observed once booting the image in question on a CPU that exercises a
particular vector table.
So let's switch to true cross section references, and let the linker fix
them up like it fixes up all the other cross section references in the
vector page.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
In order to minimize potential confusion regarding numbered labels
appearing in a different order in the assembler output due to the use of
subsections, use a named local label to jump back into the vector
handler code from the associated loop8 mitigation sequence.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
The loop8 mitigation for Spectre-BHB only requires a CPU local DSB
rather than a systemwide one, which is much more costly. And by the same
reasoning as why it is justified to omit the ISB after BPIALL, we can
also elide the ISB and rely on the exception return for the context
synchronization.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
The BPIALL mitigation for Spectre-BHB adds a single instruction to the
handler sequence that doesn't clobber any registers. Given that these
sequences are 10 instructions long, they don't fit neatly into a
cacheline anyway, so we can simply move that single instruction to the
start of the unmitigated one, and rearrange the symbol names accordingly.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
ARMv7 has MOVW/MOVT instruction pairs to load symbol addresses into
registers without having to rely on literal loads that go via the
D-cache. For older cores, we now support a similar arrangement, based
on PC-relative group relocations.
This means we can elide most literal loads entirely from the entry path,
by switching to the ldr_va macro to emit the appropriate sequence
depending on the target architecture revision.
While at it, switch to the bl_r macro for invoking the right PABT/DABT
helpers instead of setting the LR register explicitly, which does not
play well with cores that speculate across function returns.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
When CONFIG_SMP is not defined, the CPU offset is always zero, and so
we can simplify the sequence to load a per-CPU variable.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Add new amba_read_periphid() helper to simplify error handling.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
Add the ability to generate debug dumps on MediaTek SOF implementations.
Add a test to demonstrate that when the guest programs an event select
it is matched correctly in the pmu event filter and not inadvertently
filtered. This could happen on AMD if the high nybble[1] in the event
select gets truncated away only leaving the bottom byte[2] left for
matching.
This is a contrived example used for the convenience of demonstrating
this issue, however, this can be applied to event selects 0x28A (OC
Mode Switch) and 0x08A (L1 BTB Correction), where 0x08A could end up
being denied when the event select was only set up to deny 0x28A.
[1] bits 35:32 in the event select register and bits 11:8 in the event
select.
[2] bits 7:0 in the event select register and bits 7:0 in the event
select.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Message-Id: <20220517051238.2566934-3-aaronlewis@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a helper function that creates a pmu event filter given an event
list. Currently, a pmu event filter can only be created with the same
hard coded event list. Add a way to create one given a different event
list.
Also, rename make_pmu_event_filter to alloc_pmu_event_filter to clarify
it's purpose given the introduction of create_pmu_event_filter.
No functional changes intended.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Message-Id: <20220517051238.2566934-2-aaronlewis@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When returning from the compare function the u64 is truncated to an
int. This results in a loss of the high nybble[1] in the event select
and its sign if that nybble is in use. Switch from using a result that
can end up being truncated to a result that can only be: 1, 0, -1.
[1] bits 35:32 in the event select register and bits 11:8 in the event
select.
Fixes: 7ff775aca4 ("KVM: x86/pmu: Use binary search to check filtered events")
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220517051238.2566934-1-aaronlewis@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Because build-testing is over-rated, fix a few trivial objtool complaints:
vmlinux.o: warning: objtool: __tdx_module_call+0x3e: missing int3 after ret
vmlinux.o: warning: objtool: __tdx_hypercall+0x6e: missing int3 after ret
Fixes: eb94f1b6a7 ("x86/tdx: Add __tdx_module_call() and __tdx_hypercall() helper functions")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220520083839.GR2578@worktop.programming.kicks-ass.net
Commit c087c6e7b5 ("objtool: Fix type of reloc::addend") failed to
appreciate cross building from ILP32 hosts, where 'int' == 'long' and
the issue persists.
As such, use s64/int64_t/Elf64_Sxword for this field and suffer the
pain that is ISO C99 printf formats for it.
Fixes: c087c6e7b5 ("objtool: Fix type of reloc::addend")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
[peterz: reword changelog, s/long long/s64/]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/alpine.LRH.2.02.2205161041260.11556@file01.intranet.prod.int.rdu2.redhat.com
Nathan reported objtool failing with the following messages:
warning: objtool: no non-local symbols !?
warning: objtool: gelf_update_symshndx: invalid section index
The problem is due to commit 4abff6d48d ("objtool: Fix code relocs
vs weak symbols") failing to consider the case where an object would
have no non-local symbols.
The problem that commit tries to address is adding a STB_LOCAL symbol
to the symbol table in light of the ELF spec's requirement that:
In each symbol table, all symbols with STB_LOCAL binding preced the
weak and global symbols. As ``Sections'' above describes, a symbol
table section's sh_info section header member holds the symbol table
index for the first non-local symbol.
The approach taken is to find this first non-local symbol, move that
to the end and then re-use the freed spot to insert a new local symbol
and increment sh_info.
Except it never considered the case of object files without global
symbols and got a whole bunch of details wrong -- so many in fact that
it is a wonder it ever worked :/
Specifically:
- It failed to re-hash the symbol on the new index, so a subsequent
find_symbol_by_index() would not find it at the new location and a
query for the old location would now return a non-deterministic
choice between the old and new symbol.
- It failed to appreciate that the GElf wrappers are not a valid disk
format (it works because GElf is basically Elf64 and we only
support x86_64 atm.)
- It failed to fully appreciate how horrible the libelf API really is
and got the gelf_update_symshndx() call pretty much completely
wrong; with the direct consequence that if inserting a second
STB_LOCAL symbol would require moving the same STB_GLOBAL symbol
again it would completely come unstuck.
Write a new elf_update_symbol() function that wraps all the magic
required to update or create a new symbol at a given index.
Specifically, gelf_update_sym*() require an @ndx argument that is
relative to the @data argument; this means you have to manually
iterate the section data descriptor list and update @ndx.
Fixes: 4abff6d48d ("objtool: Fix code relocs vs weak symbols")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/YoPCTEYjoPqE4ZxB@hirez.programming.kicks-ass.net
Remove empty files which were supposed to get removed with the
respective commits removing the functionality in them:
$ find arch/x86/ -empty
arch/x86/lib/mmx_32.c
arch/x86/include/asm/fpu/internal.h
arch/x86/include/asm/mmx.h
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220520101723.12006-1-bp@alien8.de
On some systems it can take a long time for the hardware to enable the
GA log of the AMD IOMMU. The current wait time is only 0.1ms, but
testing showed that it can take up to 14ms for the GA log to enter
running state after it has been enabled.
Sometimes the long delay happens when booting the system, sometimes
only on resume. Adjust the timeout accordingly to not print a warning
when hardware takes a longer than usual.
There has already been an attempt to fix this with commit
9b45a7738e ("iommu/amd: Fix loop timeout issue in iommu_ga_log_enable()")
But that commit was based on some wrong math and did not fix the issue
in all cases.
Cc: "D. Ziegfeld" <dzigg@posteo.de>
Cc: Jörg-Volker Peetz <jvpeetz@web.de>
Fixes: 8bda0cfbdc ("iommu/amd: Detect and initialize guest vAPIC log")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20220520102214.12563-1-joro@8bytes.org
Alex Elder says:
====================
net: ipa: a mix of patches
This series includes a mix of things things that are generally
minor. The first four are sort of unrelated fixes, and summarizing
them here wouldn't be that helpful.
The last three together make it so only the "configuration data" we
need after initialization is saved for later use. Most such data is
used only during driver initialization. But endpoint configuration
is needed later, so the last patch saves a copy of that. Eventually
we'll want to support reconfiguring endpoints at runtime as well,
and this will facilitate that.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
All elements of the default endpoint configuration are used in the
code when programming an endpoint for use. But none of the other
configuration data is ever needed once things are initialized.
So rather than saving a pointer to *all* of the configuration data,
save a copy of only the endpoint configuration portion.
This will eventually allow endpoint configuration to be modifiable
at runtime. But even before that it means we won't keep a pointer
to configuration data after when no longer needed.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
