Commit Graph

146 Commits

Author SHA1 Message Date
Flavio Leitner
6a7cc41872 ipv6: send Change Status Report after DAD is completed
The RFC 3810 defines two type of messages for multicast
listeners. The "Current State Report" message, as the name
implies, refreshes the *current* state to the querier.
Since the querier sends Query messages periodically, there
is no need to retransmit the report.

On the other hand, any change should be reported immediately
using "State Change Report" messages. Since it's an event
triggered by a change and that it can be affected by packet
loss, the rfc states it should be retransmitted [RobVar] times
to make sure routers will receive timely.

Currently, we are sending "Current State Reports" after
DAD is completed.  Before that, we send messages using
unspecified address (::) which should be silently discarded
by routers.

This patch changes to send "State Change Report" messages
after DAD is completed fixing the behavior to be RFC compliant
and also to pass TAHI IPv6 testsuite.

Signed-off-by: Flavio Leitner <fbl@redhat.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-17 18:12:29 -08:00
Aruna-Hewapathirane
63862b5bef net: replace macros net_random and net_srandom with direct calls to prandom
This patch removes the net_random and net_srandom macros and replaces
them with direct calls to the prandom ones. As new commits only seem to
use prandom_u32 there is no use to keep them around.
This change makes it easier to grep for users of prandom_u32.

Signed-off-by: Aruna-Hewapathirane <aruna.hewapathirane@gmail.com>
Suggested-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14 15:15:25 -08:00
Salam Noureddine
9260d3e101 ipv6 mcast: use in6_dev_put in timer handlers instead of __in6_dev_put
It is possible for the timer handlers to run after the call to
ipv6_mc_down so use in6_dev_put instead of __in6_dev_put in the
handler function in order to do proper cleanup when the refcnt
reaches 0. Otherwise, the refcnt can reach zero without the
inet6_dev being destroyed and we end up leaking a reference to
the net_device and see messages like the following,

unregister_netdevice: waiting for eth0 to become free. Usage count = 1

Tested on linux-3.4.43.

Signed-off-by: Salam Noureddine <noureddine@aristanetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-30 22:28:58 -07:00
Daniel Borkmann
b4af8def5c net: ipv6: mld: introduce mld_{gq, ifc, dad}_stop_timer functions
We already have mld_{gq,ifc,dad}_start_timer() functions, so introduce
mld_{gq,ifc,dad}_stop_timer() functions to reduce code size and make it
more readable.

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04 14:53:21 -04:00
Daniel Borkmann
2b7c121f82 net: ipv6: mld: refactor query processing into v1/v2 functions
Make igmp6_event_query() a bit easier to read by refactoring code
parts into mld_process_v1() and mld_process_v2().

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04 14:53:21 -04:00
Daniel Borkmann
cc7f7ab758 net: ipv6: mld: similarly to MLDv2 have min max_delay of 1
Similarly as we do in MLDv2 queries, set a forged MLDv1 query with
0 ms mld_maxdelay to minimum timer shot time of 1 jiffies. This is
eventually done in igmp6_group_queried() anyway, so we can simplify
a check there.

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04 14:53:21 -04:00
Daniel Borkmann
58c0ecfd8d net: ipv6: mld: implement RFC3810 MLDv2 mode only
RFC3810, 10. Security Considerations says under subsection 10.1.
Query Message:

  A forged Version 1 Query message will put MLDv2 listeners on that
  link in MLDv1 Host Compatibility Mode. This scenario can be avoided
  by providing MLDv2 hosts with a configuration option to ignore
  Version 1 messages completely.

Hence, implement a MLDv2-only mode that will ignore MLDv1 traffic:

  echo 2 > /proc/sys/net/ipv6/conf/ethX/force_mld_version  or
  echo 2 > /proc/sys/net/ipv6/conf/all/force_mld_version

Note that <all> device has a higher precedence as it was previously
also the case in the macro MLD_V1_SEEN() that would "short-circuit"
if condition on <all> case.

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04 14:53:20 -04:00
Daniel Borkmann
e3f5b17047 net: ipv6: mld: get rid of MLDV2_MRC and simplify calculation
Get rid of MLDV2_MRC and use our new macros for mantisse and
exponent to calculate Maximum Response Delay out of the Maximum
Response Code.

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04 14:53:20 -04:00
Daniel Borkmann
6c567b78c8 net: ipv6: mld: clean up MLD_V1_SEEN macro
Replace the macro with a function to make it more readable. GCC will
eventually decide whether to inline this or not (also, that's not
fast-path anyway).

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04 14:53:20 -04:00
Daniel Borkmann
89225d1ce6 net: ipv6: mld: fix v1/v2 switchback timeout to rfc3810, 9.12.
i) RFC3810, 9.2. Query Interval [QI] says:

   The Query Interval variable denotes the interval between General
   Queries sent by the Querier. Default value: 125 seconds. [...]

ii) RFC3810, 9.3. Query Response Interval [QRI] says:

  The Maximum Response Delay used to calculate the Maximum Response
  Code inserted into the periodic General Queries. Default value:
  10000 (10 seconds) [...] The number of seconds represented by the
  [Query Response Interval] must be less than the [Query Interval].

iii) RFC3810, 9.12. Older Version Querier Present Timeout [OVQPT] says:

  The Older Version Querier Present Timeout is the time-out for
  transitioning a host back to MLDv2 Host Compatibility Mode. When an
  MLDv1 query is received, MLDv2 hosts set their Older Version Querier
  Present Timer to [Older Version Querier Present Timeout].

  This value MUST be ([Robustness Variable] times (the [Query Interval]
  in the last Query received)) plus ([Query Response Interval]).

Hence, on *default* the timeout results in:

  [RV] = 2, [QI] = 125sec, [QRI] = 10sec
  [OVQPT] = [RV] * [QI] + [QRI] = 260sec

Having that said, we currently calculate [OVQPT] (here given as 'switchback'
variable) as ...

  switchback = (idev->mc_qrv + 1) * max_delay

RFC3810, 9.12. says "the [Query Interval] in the last Query received". In
section "9.14. Configuring timers", it is said:

  This section is meant to provide advice to network administrators on
  how to tune these settings to their network. Ambitious router
  implementations might tune these settings dynamically based upon
  changing characteristics of the network. [...]

iv) RFC38010, 9.14.2. Query Interval:

  The overall level of periodic MLD traffic is inversely proportional
  to the Query Interval. A longer Query Interval results in a lower
  overall level of MLD traffic. The value of the Query Interval MUST
  be equal to or greater than the Maximum Response Delay used to
  calculate the Maximum Response Code inserted in General Query
  messages.

I assume that was why switchback is calculated as is (3 * max_delay), although
this setting seems to be meant for routers only to configure their [QI]
interval for non-default intervals. So usage here like this is clearly wrong.

Concluding, the current behaviour in IPv6's multicast code is not conform
to the RFC as switch back is calculated wrongly. That is, it has a too small
value, so MLDv2 hosts switch back again to MLDv2 way too early, i.e. ~30secs
instead of ~260secs on default.

Hence, introduce necessary helper functions and fix this up properly as it
should be.

Introduced in 06da92283 ("[IPV6]: Add MLDv2 support."). Credits to Hannes
Frederic Sowa who also had a hand in this as well. Also thanks to Hangbin Liu
who did initial testing.

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Cc: David Stevens <dlstevens@us.ibm.com>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04 14:53:20 -04:00
Daniel Borkmann
9fd0784164 net: ipv6: mcast: minor: use defines for rfc3810/8.1 lengths
Instead of hard-coding length values, use a define to make it clear
where those lengths come from.

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-20 23:52:02 -07:00
Daniel Borkmann
c2cef4e888 net: ipv6: minor: *_start_timer: rather use unsigned long
For the functions mld_gq_start_timer(), mld_ifc_start_timer(),
and mld_dad_start_timer(), rather use unsigned long than int
as we operate only on unsigned values anyway. This seems more
appropriate as there is no good reason to do type conversions
to int, that could lead to future errors.

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-20 23:52:02 -07:00
Daniel Borkmann
846989635b net: ipv6: igmp6_event_query: use msecs_to_jiffies
Use proper API functions to calculate jiffies from milliseconds and
not the crude method of dividing HZ by a value. This ensures more
accurate values even in the case of strange HZ values. While at it,
also simplify code in the mlh2 case by using max().

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-20 23:52:02 -07:00
Hannes Frederic Sowa
fc4eba58b4 ipv6: make unsolicited report intervals configurable for mld
Commit cab70040df ("net: igmp:
Reduce Unsolicited report interval to 1s when using IGMPv3") and
2690048c01 ("net: igmp: Allow user-space
configuration of igmp unsolicited report interval") by William Manley made
igmp unsolicited report intervals configurable per interface and corrected
the interval of unsolicited igmpv3 report messages resendings to 1s.

Same needs to be done for IPv6:

MLDv1 (RFC2710 7.10.): 10 seconds
MLDv2 (RFC3810 9.11.): 1 second

Both intervals are configurable via new procfs knobs
mldv1_unsolicited_report_interval and mldv2_unsolicited_report_interval.

(also added .force_mld_version to ipv6_devconf_dflt to bring structs in
line without semantic changes)

v2:
a) Joined documentation update for IPv4 and IPv6 MLD/IGMP
   unsolicited_report_interval procfs knobs.
b) incorporate stylistic feedback from William Manley

v3:
a) add new DEVCONF_* values to the end of the enum (thanks to David
   Miller)

Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: William Manley <william.manley@youview.com>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-13 17:05:04 -07:00
Hannes Frederic Sowa
9d4a031464 ipv4, ipv6: send igmpv3/mld packets with TC_PRIO_CONTROL
v2:
a) Also send ipv4 igmp messages with TC_PRIO_CONTROL

Cc: William Manley <william.manley@youview.com>
Cc: Lukas Tribus <luky-37@hotmail.com>
Acked-by: Benjamin LaHaise <bcrl@kvack.org>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-28 11:13:55 -07:00
Amerigo Wang
8965779d2c ipv6,mcast: always hold idev->lock before mca_lock
dingtianhong reported the following deadlock detected by lockdep:

 ======================================================
 [ INFO: possible circular locking dependency detected ]
 3.4.24.05-0.1-default #1 Not tainted
 -------------------------------------------------------
 ksoftirqd/0/3 is trying to acquire lock:
  (&ndev->lock){+.+...}, at: [<ffffffff8147f804>] ipv6_get_lladdr+0x74/0x120

 but task is already holding lock:
  (&mc->mca_lock){+.+...}, at: [<ffffffff8149d130>] mld_send_report+0x40/0x150

 which lock already depends on the new lock.

 the existing dependency chain (in reverse order) is:

 -> #1 (&mc->mca_lock){+.+...}:
        [<ffffffff810a8027>] validate_chain+0x637/0x730
        [<ffffffff810a8417>] __lock_acquire+0x2f7/0x500
        [<ffffffff810a8734>] lock_acquire+0x114/0x150
        [<ffffffff814f691a>] rt_spin_lock+0x4a/0x60
        [<ffffffff8149e4bb>] igmp6_group_added+0x3b/0x120
        [<ffffffff8149e5d8>] ipv6_mc_up+0x38/0x60
        [<ffffffff81480a4d>] ipv6_find_idev+0x3d/0x80
        [<ffffffff81483175>] addrconf_notify+0x3d5/0x4b0
        [<ffffffff814fae3f>] notifier_call_chain+0x3f/0x80
        [<ffffffff81073471>] raw_notifier_call_chain+0x11/0x20
        [<ffffffff813d8722>] call_netdevice_notifiers+0x32/0x60
        [<ffffffff813d92d4>] __dev_notify_flags+0x34/0x80
        [<ffffffff813d9360>] dev_change_flags+0x40/0x70
        [<ffffffff813ea627>] do_setlink+0x237/0x8a0
        [<ffffffff813ebb6c>] rtnl_newlink+0x3ec/0x600
        [<ffffffff813eb4d0>] rtnetlink_rcv_msg+0x160/0x310
        [<ffffffff814040b9>] netlink_rcv_skb+0x89/0xb0
        [<ffffffff813eb357>] rtnetlink_rcv+0x27/0x40
        [<ffffffff81403e20>] netlink_unicast+0x140/0x180
        [<ffffffff81404a9e>] netlink_sendmsg+0x33e/0x380
        [<ffffffff813c4252>] sock_sendmsg+0x112/0x130
        [<ffffffff813c537e>] __sys_sendmsg+0x44e/0x460
        [<ffffffff813c5544>] sys_sendmsg+0x44/0x70
        [<ffffffff814feab9>] system_call_fastpath+0x16/0x1b

 -> #0 (&ndev->lock){+.+...}:
        [<ffffffff810a798e>] check_prev_add+0x3de/0x440
        [<ffffffff810a8027>] validate_chain+0x637/0x730
        [<ffffffff810a8417>] __lock_acquire+0x2f7/0x500
        [<ffffffff810a8734>] lock_acquire+0x114/0x150
        [<ffffffff814f6c82>] rt_read_lock+0x42/0x60
        [<ffffffff8147f804>] ipv6_get_lladdr+0x74/0x120
        [<ffffffff8149b036>] mld_newpack+0xb6/0x160
        [<ffffffff8149b18b>] add_grhead+0xab/0xc0
        [<ffffffff8149d03b>] add_grec+0x3ab/0x460
        [<ffffffff8149d14a>] mld_send_report+0x5a/0x150
        [<ffffffff8149f99e>] igmp6_timer_handler+0x4e/0xb0
        [<ffffffff8105705a>] call_timer_fn+0xca/0x1d0
        [<ffffffff81057b9f>] run_timer_softirq+0x1df/0x2e0
        [<ffffffff8104e8c7>] handle_pending_softirqs+0xf7/0x1f0
        [<ffffffff8104ea3b>] __do_softirq_common+0x7b/0xf0
        [<ffffffff8104f07f>] __thread_do_softirq+0x1af/0x210
        [<ffffffff8104f1c1>] run_ksoftirqd+0xe1/0x1f0
        [<ffffffff8106c7de>] kthread+0xae/0xc0
        [<ffffffff814fff74>] kernel_thread_helper+0x4/0x10

actually we can just hold idev->lock before taking pmc->mca_lock,
and avoid taking idev->lock again when iterating idev->addr_list,
since the upper callers of mld_newpack() already take
read_lock_bh(&idev->lock).

Reported-by: dingtianhong <dingtianhong@huawei.com>
Cc: dingtianhong <dingtianhong@huawei.com>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Tested-by: Ding Tianhong <dingtianhong@huawei.com>
Tested-by: Chen Weilong <chenweilong@huawei.com>
Signed-off-by: Cong Wang <amwang@redhat.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-01 23:39:21 -07:00
Hannes Frederic Sowa
b173ee488d ipv6: resend MLD report if a link-local address completes DAD
RFC3590/RFC3810 specifies we should resend MLD reports as soon as a
valid link-local address is available.

We now use the valid_ll_addr_cnt to check if it is necessary to resend
a new report.

Changes since Flavio Leitner's version:
a) adapt for valid_ll_addr_cnt
b) resend first reports directly in the path and just arm the timer for
   mc_qrv-1 resends.

Reported-by: Flavio Leitner <fleitner@redhat.com>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: David Stevens <dlstevens@us.ibm.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Flavio Leitner <fbl@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-28 21:19:17 -07:00
Simon Horman
29a3cad5c6 ipv6: Correct comparisons and calculations using skb->tail and skb-transport_header
This corrects an regression introduced by "net: Use 16bits for *_headers
fields of struct skbuff" when NET_SKBUFF_DATA_USES_OFFSET is not set. In
that case skb->tail will be a pointer whereas skb->transport_header
will be an offset from head. This is corrected by using wrappers that
ensure that comparisons and calculations are always made using pointers.

Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-28 23:49:07 -07:00
Gao feng
ece31ffd53 net: proc: change proc_net_remove to remove_proc_entry
proc_net_remove is only used to remove proc entries
that under /proc/net,it's not a general function for
removing proc entries of netns. if we want to remove
some proc entries which under /proc/net/stat/, we still
need to call remove_proc_entry.

this patch use remove_proc_entry to replace proc_net_remove.
we can remove proc_net_remove after this patch.

Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-18 14:53:08 -05:00
Gao feng
d4beaa66ad net: proc: change proc_net_fops_create to proc_create
Right now, some modules such as bonding use proc_create
to create proc entries under /proc/net/, and other modules
such as ipv4 use proc_net_fops_create.

It looks a little chaos.this patch changes all of
proc_net_fops_create to proc_create. we can remove
proc_net_fops_create after this patch.

Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-18 14:53:08 -05:00
YOSHIFUJI Hideaki / 吉藤英明
ec16ef2228 ipv6 mcast: Do not join device multicast for interface-local multicasts.
RFC4291 (IPv6 addressing architecture) says that interface-Local scope
spans only a single interface on a node.  We should not join L2 device
multicast list for addresses in interface-local (or smaller) scope.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-11 00:21:44 -05:00
Jean Sacren
56db1c5f41 mcast: do not check 'rv' twice in a row
With the loop, don't check 'rv' twice in a row. Without the loop, 'rv'
doesn't even need to be checked.

Make the comment more grammar-friendly.

Signed-off-by: Jean Sacren <sakiwit@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-04 13:26:49 -05:00
YOSHIFUJI Hideaki / 吉藤英明
07c2fecc36 ipv6 mcast: Use ipv6_addr_equal() in ip6_mc_source().
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-29 22:58:40 -05:00
YOSHIFUJI Hideaki / 吉藤英明
2576f17dfa ipv6: Unshare ip6_nd_hdr() and change return type to void.
- move ip6_nd_hdr() to its users' source files.
  In net/ipv6/mcast.c, it will be called ip6_mc_hdr().
- make return type to void since this function never fails.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-21 13:33:15 -05:00
YOSHIFUJI Hideaki / 吉藤英明
12fd84f438 ipv6: Remove unused neigh argument for icmp6_dst_alloc() and its callers.
Because of rt->n removal, we do not need neigh argument any more.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-18 14:41:13 -05:00
YOSHIFUJI Hideaki / 吉藤英明
daad151263 ipv6: Make ipv6_is_mld() inline and use it from ip6_mc_input().
Move generalized version of ipv6_is_mld() to header,
and use it from ip6_mc_input().

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-13 20:17:14 -05:00
Eric Dumazet
0e1efe9d5e ipv6: avoid taking locks at socket dismantle
ipv6_sock_mc_close() is called for ipv6 sockets at close time, and most
of them don't use multicast.

Add a test to avoid contention on a shared spinlock.

Same heuristic applies for ipv6_sock_ac_close(), to avoid contention
on a shared rwlock.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-05 16:01:28 -05:00
Amerigo Wang
94e187c015 ipv6: introduce ip6_rt_put()
As suggested by Eric, we could introduce a helper function
for ipv6 too, to avoid checking if rt is NULL before
dst_release().

Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-03 14:59:05 -04:00
Li Wei
a858d64b77 ipv6: fix unappropriate errno returned for non-multicast address
We need to check the passed in multicast address and return
appropriate errno(EINVAL) if it is not valid. And it's no need
to walk through the ipv6_mc_list in this situation.

Signed-off-by: Li Wei <lw@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 01:35:03 -07:00
Eric Dumazet
a50feda546 ipv6: bool/const conversions phase2
Mostly bool conversions, some inline removals and const additions.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-19 01:08:16 -04:00
Joe Perches
f32138319c net: ipv6: Standardize prefixes for message logging
Add #define pr_fmt(fmt) as appropriate.

Add "IPv6: " to appropriate files.

Convert printk(KERN_<LEVEL> to pr_<level> (but not KERN_DEBUG).
Standardize on "%s: " not "%s(): " when emitting __func__.
Use "%s: ", __func__ instead of embedding function name.
Coalesce formats, align arguments.

ADDRCONF output is now prefixed with "IPv6: "

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-16 01:01:03 -04:00
David S. Miller
06eb4eafbd Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2012-04-10 14:30:45 -04:00
RongQing.Li
ce713ee5a1 net: replace continue with break to reduce unnecessary loop in xxx_xmarksources
The conditional which decides to skip inactive filters does not
change with the change of loop index, so it is unnecessary to
check them many times.

Signed-off-by: RongQing.Li <roy.qing.li@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-05 05:42:18 -04:00
RongQing.Li
78d50217ba ipv6: fix array index in ip6_mc_add_src()
Convert array index from the loop bound to the loop index.

And remove the void type conversion to ip6_mc_del1_src() return
code, seem it is unnecessary, since ip6_mc_del1_src() does not
use __must_check similar attribute, no compiler will report the
warning when it is removed.

v2: enrich the commit header

Signed-off-by: RongQing.Li <roy.qing.li@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-05 00:00:42 -04:00
RongQing.Li
c577923756 ipv6: Don't dev_hold(dev) in ip6_mc_find_dev_rcu.
ip6_mc_find_dev_rcu() is called with rcu_read_lock(), so don't
need to dev_hold().
With dev_hold(), not corresponding dev_put(), will lead to leak.

[ bug introduced in 96b52e61be (ipv6: mcast: RCU conversions) ]

Signed-off-by: RongQing.Li <roy.qing.li@gmail.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-16 21:56:42 -07:00
David S. Miller
d191854282 ipv6: Kill rt6i_dev and rt6i_expires defines.
It just obscures that the netdevice pointer and the expires value are
implemented in the dst_entry sub-object of the ipv6 route.

And it makes grepping for dst_entry member uses much harder too.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-28 20:19:20 -05:00
David S. Miller
87a115783e ipv6: Move xfrm_lookup() call down into icmp6_dst_alloc().
And return error pointers.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-06 17:04:13 -05:00
Jun Zhao
99d2f47aa9 ipv6 : mcast : Delete useless parameter in ip6_mc_add1_src()
Need not to used 'delta' flag when add single-source to interface
filter source list.

Signed-off-by: Jun Zhao <mypopydev@gmail.com>
Signed-off-by: David S. Miller <davem@drr.davemloft.net>
2011-11-30 23:10:02 -05:00
Alexey Dobriyan
4e3fd7a06d net: remove ipv6_addr_copy()
C assignment can handle struct in6_addr copying.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-22 16:43:32 -05:00
Herbert Xu
a7ae199224 ipv6: Remove all uses of LL_ALLOCATED_SPACE
ipv6: Remove all uses of LL_ALLOCATED_SPACE

The macro LL_ALLOCATED_SPACE was ill-conceived.  It applies the
alignment to the sum of needed_headroom and needed_tailroom.  As
the amount that is then reserved for head room is needed_headroom
with alignment, this means that the tail room left may be too small.

This patch replaces all uses of LL_ALLOCATED_SPACE in net/ipv6
with the macro LL_RESERVED_SPACE and direct reference to
needed_tailroom.

This also fixes the problem with needed_headroom changing between
allocating the skb and reserving the head room.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-18 14:37:09 -05:00
Yan, Zheng
e05c4ad3ed mcast: Fix source address selection for multicast listener report
Should check use count of include mode filter instead of total number
of include mode filters.

Signed-off-by: Zheng Yan <zheng.z.yan@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-24 17:46:15 -07:00
Linus Torvalds
06f4e926d2 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1446 commits)
  macvlan: fix panic if lowerdev in a bond
  tg3: Add braces around 5906 workaround.
  tg3: Fix NETIF_F_LOOPBACK error
  macvlan: remove one synchronize_rcu() call
  networking: NET_CLS_ROUTE4 depends on INET
  irda: Fix error propagation in ircomm_lmp_connect_response()
  irda: Kill set but unused variable 'bytes' in irlan_check_command_param()
  irda: Kill set but unused variable 'clen' in ircomm_connect_indication()
  rxrpc: Fix set but unused variable 'usage' in rxrpc_get_transport()
  be2net: Kill set but unused variable 'req' in lancer_fw_download()
  irda: Kill set but unused vars 'saddr' and 'daddr' in irlan_provider_connect_indication()
  atl1c: atl1c_resume() is only used when CONFIG_PM_SLEEP is defined.
  rxrpc: Fix set but unused variable 'usage' in rxrpc_get_peer().
  rxrpc: Kill set but unused variable 'local' in rxrpc_UDP_error_handler()
  rxrpc: Kill set but unused variable 'sp' in rxrpc_process_connection()
  rxrpc: Kill set but unused variable 'sp' in rxrpc_rotate_tx_window()
  pkt_sched: Kill set but unused variable 'protocol' in tc_classify()
  isdn: capi: Use pr_debug() instead of ifdefs.
  tg3: Update version to 3.119
  tg3: Apply rx_discards fix to 5719/5720
  ...

Fix up trivial conflicts in arch/x86/Kconfig and net/mac80211/agg-tx.c
as per Davem.
2011-05-20 13:43:21 -07:00
Lai Jiangshan
e3cbf28fa6 net,rcu: convert call_rcu(ipv6_mc_socklist_reclaim) to kfree_rcu()
The rcu callback ipv6_mc_socklist_reclaim() just calls a kfree(),
so we use kfree_rcu() instead of the call_rcu(ipv6_mc_socklist_reclaim).

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2011-05-07 22:51:02 -07:00
Eric Dumazet
b71d1d426d inet: constify ip headers and in6_addr
Add const qualifiers to structs iphdr, ipv6hdr and in6_addr pointers
where possible, to make code intention more obvious.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-22 11:04:14 -07:00
David S. Miller
4c9483b2fb ipv6: Convert to use flowi6 where applicable.
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-12 15:08:54 -08:00
Hagen Paul Pfeifer
4b66fef9b5 mcast: net_device dev not used
ip6_mc_source(), ip6_mc_msfilter() as well as ip6_mc_msfget() declare
and assign dev but do not use the variable afterwards.

Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-07 15:51:13 -08:00
David S. Miller
452edd598f xfrm: Return dst directly from xfrm_lookup()
Instead of on the stack.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-02 13:27:41 -08:00
Eric Dumazet
456b61bca8 ipv6: mcast: RCU conversion
ipv6_sk_mc_lock rwlock becomes a spinlock.

readers (inet6_mc_check()) now takes rcu_read_lock() instead of read
lock. Writers dont need to disable BH anymore.

struct ipv6_mc_socklist objects are reclaimed after one RCU grace
period.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-24 11:16:42 -08:00
Joe Perches
8a22c99a80 net/ipv6/mcast.c: Remove unnecessary semicolons
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-15 11:07:16 -08:00
Changli Gao
d8d1f30b95 net-next: remove useless union keyword
remove useless union keyword in rtable, rt6_info and dn_route.

Since there is only one member in a union, the union keyword isn't useful.

Signed-off-by: Changli Gao <xiaosuo@gmail.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-10 23:31:35 -07:00