From Nick's cover letter:
Linux powerpc new system call instruction and ABI
System Call Vectored (scv) ABI
==============================
The scv instruction is introduced with POWER9 / ISA3, it comes with an
rfscv counter-part. The benefit of these instructions is
performance (trading slower SRR0/1 with faster LR/CTR registers, and
entering the kernel with MSR[EE] and MSR[RI] left enabled, which can
reduce MSR updates. The scv instruction has 128 levels (not enough to
cover the Linux system call space).
Assignment and advertisement
----------------------------
The proposal is to assign scv levels conservatively, and advertise
them with HWCAP feature bits as we add support for more.
Linux has not enabled FSCR[SCV] yet, so executing the scv instruction
will cause the kernel to log a "SCV facility unavilable" message, and
deliver a SIGILL with ILL_ILLOPC to the process. Linux has defined a
HWCAP2 bit PPC_FEATURE2_SCV for SCV support, but does not set it.
This change allocates the zero level ('scv 0'), advertised with
PPC_FEATURE2_SCV, which will be used to provide normal Linux system
calls (equivalent to 'sc').
Attempting to execute scv with other levels will cause a SIGILL to be
delivered the same as before, but will not log a "SCV facility
unavailable" message (because the processor facility is enabled).
Calling convention
------------------
The proposal is for scv 0 to provide the standard Linux system call
ABI with the following differences from sc convention[1]:
- LR is to be volatile across scv calls. This is necessary because the
scv instruction clobbers LR. From previous discussion, this should
be possible to deal with in GCC clobbers and CFI.
- cr1 and cr5-cr7 are volatile. This matches the C ABI and would allow
the kernel system call exit to avoid restoring the volatile cr
registers (although we probably still would anyway to avoid
information leaks).
- Error handling: The consensus among kernel, glibc, and musl is to
move to using negative return values in r3 rather than CR0[SO]=1 to
indicate error, which matches most other architectures, and is
closer to a function call.
Notes
-----
- r0,r4-r8 are documented as volatile in the ABI, but the kernel patch
as submitted currently preserves them. This is to leave room for
deciding which way to go with these. Some small benefit was found by
preserving them[1] but I'm not convinced it's worth deviating from
the C function call ABI just for this. Release code should follow
the ABI.
Previous discussions:
https://lists.ozlabs.org/pipermail/linuxppc-dev/2020-April/208691.htmlhttps://lists.ozlabs.org/pipermail/linuxppc-dev/2020-April/209268.html
[1] https://github.com/torvalds/linux/blob/master/Documentation/powerpc/syscall64-abi.rst
[2] https://lists.ozlabs.org/pipermail/linuxppc-dev/2020-April/209263.html
Currently prefixed instructions are dumped as two separate word
instructions. Use mread_instr() so that prefixed instructions are read
as such and update the incrementor in the loop to take this into
account.
'dump_func' is print_insn_powerpc() which comes from ppc-dis.c which is
taken from binutils. When this is updated prefixed instructions will be
disassembled.
Currently dumping prefixed instructions looks like this:
0:mon> di c000000000094168
c000000000094168 0x06000000 .long 0x6000000
c00000000009416c 0x392a0003 addi r9,r10,3
c000000000094170 0x913f0028 stw r9,40(r31)
c000000000094174 0xe93f002a lwa r9,40(r31)
c000000000094178 0x7d234b78 mr r3,r9
c00000000009417c 0x383f0040 addi r1,r31,64
c000000000094180 0xebe1fff8 ld r31,-8(r1)
c000000000094184 0x4e800020 blr
c000000000094188 0x60000000 nop
...
c000000000094190 0x3c4c0121 addis r2,r12,289
c000000000094194 0x38429670 addi r2,r2,-27024
c000000000094198 0x7c0802a6 mflr r0
c00000000009419c 0x60000000 nop
c0000000000941a0 0xe9240100 ld r9,256(r4)
c0000000000941a4 0x39400001 li r10,1
After this it looks like:
0:mon> di c000000000094168
c000000000094168 0x06000000 0x392a0003 .long 0x392a000306000000
c000000000094170 0x913f0028 stw r9,40(r31)
c000000000094174 0xe93f002a lwa r9,40(r31)
c000000000094178 0x7d234b78 mr r3,r9
c00000000009417c 0x383f0040 addi r1,r31,64
c000000000094180 0xebe1fff8 ld r31,-8(r1)
c000000000094184 0x4e800020 blr
c000000000094188 0x60000000 nop
...
c000000000094190 0x3c4c0121 addis r2,r12,289
c000000000094194 0x38429570 addi r2,r2,-27280
c000000000094198 0x7c0802a6 mflr r0
c00000000009419c 0x60000000 nop
c0000000000941a0 0xe9240100 ld r9,256(r4)
c0000000000941a4 0x39400001 li r10,1
c0000000000941a8 0x3d02000b addis r8,r2,11
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200602052728.18227-2-jniethe5@gmail.com
There are quite a few places where instructions are printed, this is
done using a '%x' format specifier. With the introduction of prefixed
instructions, this does not work well. Currently in these places,
ppc_inst_val() is used for the value for %x so only the first word of
prefixed instructions are printed.
When the instructions are word instructions, only a single word should
be printed. For prefixed instructions both the prefix and suffix should
be printed. To accommodate both of these situations, instead of a '%x'
specifier use '%s' and introduce a helper, __ppc_inst_as_str() which
returns a char *. The char * __ppc_inst_as_str() returns is buffer that
is passed to it by the caller.
It is cumbersome to require every caller of __ppc_inst_as_str() to now
declare a buffer. To make it more convenient to use __ppc_inst_as_str(),
wrap it in a macro that uses a compound statement to allocate a buffer
on the caller's stack before calling it.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
[mpe: Drop 0x prefix to match most existings uses, especially xmon]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200602052728.18227-1-jniethe5@gmail.com
Add support for the scv instruction on POWER9 and later CPUs.
For now this implements the zeroth scv vector 'scv 0', as identical to
'sc' system calls, with the exception that LR is not preserved, nor
are volatile CR registers, and error is not indicated with CR0[SO],
but by returning a negative errno.
rfscv is implemented to return from scv type system calls. It can not
be used to return from sc system calls because those are defined to
preserve LR.
getpid syscall throughput on POWER9 is improved by 26% (428 to 318
cycles), largely due to reducing mtmsr and mtspr.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Fix ppc64e build]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200611081203.995112-3-npiggin@gmail.com
PowerISA v3.1 added three new perfromance
monitoring unit (PMU) speical purpose register (SPR).
They are Monitor Mode Control Register 3 (MMCR3),
Sampled Instruction Event Register 2 (SIER2),
Sampled Instruction Event Register 3 (SIER3).
Patch here adds a new dump function dump_310_sprs
to print these SPR values.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1594996707-3727-7-git-send-email-atrajeev@linux.vnet.ibm.com
I'm seeing RCU warnings when exiting xmon. xmon resets the NMI
watchdog, but does nothing with the RCU stall or soft lockup
watchdogs. Add a helper function that handles all three.
Signed-off-by: Anton Blanchard <anton@ozlabs.org>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200630100218.62a3c3fb@kryten.localdomain
Patch series "mm: consolidate definitions of page table accessors", v2.
The low level page table accessors (pXY_index(), pXY_offset()) are
duplicated across all architectures and sometimes more than once. For
instance, we have 31 definition of pgd_offset() for 25 supported
architectures.
Most of these definitions are actually identical and typically it boils
down to, e.g.
static inline unsigned long pmd_index(unsigned long address)
{
return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1);
}
static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address)
{
return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address);
}
These definitions can be shared among 90% of the arches provided
XYZ_SHIFT, PTRS_PER_XYZ and xyz_page_vaddr() are defined.
For architectures that really need a custom version there is always
possibility to override the generic version with the usual ifdefs magic.
These patches introduce include/linux/pgtable.h that replaces
include/asm-generic/pgtable.h and add the definitions of the page table
accessors to the new header.
This patch (of 12):
The linux/mm.h header includes <asm/pgtable.h> to allow inlining of the
functions involving page table manipulations, e.g. pte_alloc() and
pmd_alloc(). So, there is no point to explicitly include <asm/pgtable.h>
in the files that include <linux/mm.h>.
The include statements in such cases are remove with a simple loop:
for f in $(git grep -l "include <linux/mm.h>") ; do
sed -i -e '/include <asm\/pgtable.h>/ d' $f
done
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-1-rppt@kernel.org
Link: http://lkml.kernel.org/r/20200514170327.31389-2-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Here is the tty and serial driver updates for 5.8-rc1
Nothing huge at all, just a lot of little serial driver fixes, updates
for new devices and features, and other small things. Full details are
in the shortlog.
Note, you will get a conflict merging with your tree in the
Documentation/devicetree/bindings/serial/rs485.yaml file, but it should
be pretty obvious what to do. If not, I'm sure Rob will clean it all up
afterwards :)
All of these have been in linux-next with no issues for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXtzpCg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylRxACgjGtOKPjahONL4lWd0F8ZYEcyw7sAn34woBCO
BDUV3kolrRQ4OYNJWsHP
=TvqG
-----END PGP SIGNATURE-----
Merge tag 'tty-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here is the tty and serial driver updates for 5.8-rc1
Nothing huge at all, just a lot of little serial driver fixes, updates
for new devices and features, and other small things. Full details are
in the shortlog.
All of these have been in linux-next with no issues for a while"
* tag 'tty-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (67 commits)
tty: serial: qcom_geni_serial: Add 51.2MHz frequency support
tty: serial: imx: clear Ageing Timer Interrupt in handler
serial: 8250_fintek: Add F81966 Support
sc16is7xx: Add flag to activate IrDA mode
dt-bindings: sc16is7xx: Add flag to activate IrDA mode
serial: 8250: Support rs485 bus termination GPIO
serial: 8520_port: Fix function param documentation
dt-bindings: serial: Add binding for rs485 bus termination GPIO
vt: keyboard: avoid signed integer overflow in k_ascii
serial: 8250: Enable 16550A variants by default on non-x86
tty: hvc_console, fix crashes on parallel open/close
serial: imx: Initialize lock for non-registered console
sc16is7xx: Read the LSR register for basic device presence check
sc16is7xx: Allow sharing the IRQ line
sc16is7xx: Use threaded IRQ
sc16is7xx: Always use falling edge IRQ
tty: n_gsm: Fix bogus i++ in gsm_data_kick
tty: n_gsm: Remove unnecessary test in gsm_print_packet()
serial: stm32: add no_console_suspend support
tty: serial: fsl_lpuart: Use __maybe_unused instead of #if CONFIG_PM_SLEEP
...
- Support for userspace to send requests directly to the on-chip GZIP
accelerator on Power9.
- Rework of our lockless page table walking (__find_linux_pte()) to make it
safe against parallel page table manipulations without relying on an IPI for
serialisation.
- A series of fixes & enhancements to make our machine check handling more
robust.
- Lots of plumbing to add support for "prefixed" (64-bit) instructions on
Power10.
- Support for using huge pages for the linear mapping on 8xx (32-bit).
- Remove obsolete Xilinx PPC405/PPC440 support, and an associated sound driver.
- Removal of some obsolete 40x platforms and associated cruft.
- Initial support for booting on Power10.
- Lots of other small features, cleanups & fixes.
Thanks to:
Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan, Andrey Abramov,
Aneesh Kumar K.V, Balamuruhan S, Bharata B Rao, Bulent Abali, Cédric Le
Goater, Chen Zhou, Christian Zigotzky, Christophe JAILLET, Christophe Leroy,
Dmitry Torokhov, Emmanuel Nicolet, Erhard F., Gautham R. Shenoy, Geoff Levand,
George Spelvin, Greg Kurz, Gustavo A. R. Silva, Gustavo Walbon, Haren Myneni,
Hari Bathini, Joel Stanley, Jordan Niethe, Kajol Jain, Kees Cook, Leonardo
Bras, Madhavan Srinivasan., Mahesh Salgaonkar, Markus Elfring, Michael
Neuling, Michal Simek, Nathan Chancellor, Nathan Lynch, Naveen N. Rao,
Nicholas Piggin, Oliver O'Halloran, Paul Mackerras, Pingfan Liu, Qian Cai, Ram
Pai, Raphael Moreira Zinsly, Ravi Bangoria, Sam Bobroff, Sandipan Das, Segher
Boessenkool, Stephen Rothwell, Sukadev Bhattiprolu, Tyrel Datwyler, Wolfram
Sang, Xiongfeng Wang.
-----BEGIN PGP SIGNATURE-----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=o0WU
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Support for userspace to send requests directly to the on-chip GZIP
accelerator on Power9.
- Rework of our lockless page table walking (__find_linux_pte()) to
make it safe against parallel page table manipulations without
relying on an IPI for serialisation.
- A series of fixes & enhancements to make our machine check handling
more robust.
- Lots of plumbing to add support for "prefixed" (64-bit) instructions
on Power10.
- Support for using huge pages for the linear mapping on 8xx (32-bit).
- Remove obsolete Xilinx PPC405/PPC440 support, and an associated sound
driver.
- Removal of some obsolete 40x platforms and associated cruft.
- Initial support for booting on Power10.
- Lots of other small features, cleanups & fixes.
Thanks to: Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan,
Andrey Abramov, Aneesh Kumar K.V, Balamuruhan S, Bharata B Rao, Bulent
Abali, Cédric Le Goater, Chen Zhou, Christian Zigotzky, Christophe
JAILLET, Christophe Leroy, Dmitry Torokhov, Emmanuel Nicolet, Erhard F.,
Gautham R. Shenoy, Geoff Levand, George Spelvin, Greg Kurz, Gustavo A.
R. Silva, Gustavo Walbon, Haren Myneni, Hari Bathini, Joel Stanley,
Jordan Niethe, Kajol Jain, Kees Cook, Leonardo Bras, Madhavan
Srinivasan., Mahesh Salgaonkar, Markus Elfring, Michael Neuling, Michal
Simek, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin,
Oliver O'Halloran, Paul Mackerras, Pingfan Liu, Qian Cai, Ram Pai,
Raphael Moreira Zinsly, Ravi Bangoria, Sam Bobroff, Sandipan Das, Segher
Boessenkool, Stephen Rothwell, Sukadev Bhattiprolu, Tyrel Datwyler,
Wolfram Sang, Xiongfeng Wang.
* tag 'powerpc-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (299 commits)
powerpc/pseries: Make vio and ibmebus initcalls pseries specific
cxl: Remove dead Kconfig options
powerpc: Add POWER10 architected mode
powerpc/dt_cpu_ftrs: Add MMA feature
powerpc/dt_cpu_ftrs: Enable Prefixed Instructions
powerpc/dt_cpu_ftrs: Advertise support for ISA v3.1 if selected
powerpc: Add support for ISA v3.1
powerpc: Add new HWCAP bits
powerpc/64s: Don't set FSCR bits in INIT_THREAD
powerpc/64s: Save FSCR to init_task.thread.fscr after feature init
powerpc/64s: Don't let DT CPU features set FSCR_DSCR
powerpc/64s: Don't init FSCR_DSCR in __init_FSCR()
powerpc/32s: Fix another build failure with CONFIG_PPC_KUAP_DEBUG
powerpc/module_64: Use special stub for _mcount() with -mprofile-kernel
powerpc/module_64: Simplify check for -mprofile-kernel ftrace relocations
powerpc/module_64: Consolidate ftrace code
powerpc/32: Disable KASAN with pages bigger than 16k
powerpc/uaccess: Don't set KUEP by default on book3s/32
powerpc/uaccess: Don't set KUAP by default on book3s/32
powerpc/8xx: Reduce time spent in allow_user_access() and friends
...
Show the address of the tasks regs in the process listing in xmon. The
regs should always be on the stack page that we also print the address
of, but it's still helpful not to have to find them by hand.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200520111740.953679-1-mpe@ellerman.id.au
In a few places we want to calculate the address of the next
instruction. Previously that was simple, we just added 4 bytes, or if
using a u32 * we incremented that pointer by 1.
But prefixed instructions make it more complicated, we need to advance
by either 4 or 8 bytes depending on the actual instruction. We also
can't do pointer arithmetic using struct ppc_inst, because it is
always 8 bytes in size on 64-bit, even though we might only need to
advance by 4 bytes.
So add a ppc_inst_next() helper which calculates the location of the
next instruction, if the given instruction was located at the given
address. Note the instruction doesn't need to actually be at the
address in memory.
Although it would seem natural for the value to be passed by value,
that makes it too easy to write a loop that will read off the end of a
page, eg:
for (; src < end; src = ppc_inst_next(src, *src),
dest = ppc_inst_next(dest, *dest))
As noticed by Christophe and Jordan, if end is the exact end of a
page, and the next page is not mapped, this will fault, because *dest
will read 8 bytes, 4 bytes into the next page.
So value is passed by reference, so the helper can be careful to use
ppc_inst_read() on it.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Jordan Niethe <jniethe5@gmail.com>
Link: https://lore.kernel.org/r/20200522133318.1681406-1-mpe@ellerman.id.au
Add support for 2nd DAWR in xmon. With this, we can have two
simultaneous breakpoints from xmon.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Michael Neuling <mikey@neuling.org>
Link: https://lore.kernel.org/r/20200514111741.97993-17-ravi.bangoria@linux.ibm.com
Xmon allows overwriting breakpoints because it's supported by only
one DAWR. But with multiple DAWRs, overwriting becomes ambiguous
or unnecessary complicated. So let's not allow it.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Michael Neuling <mikey@neuling.org>
Link: https://lore.kernel.org/r/20200514111741.97993-16-ravi.bangoria@linux.ibm.com
Introduce new parameter 'nr' to __set_breakpoint() which indicates
which DAWR should be programed. Also convert current_brk variable
to an array.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Michael Neuling <mikey@neuling.org>
Link: https://lore.kernel.org/r/20200514111741.97993-7-ravi.bangoria@linux.ibm.com
Power10 is introducing second DAWR. Use real register names from ISA
for current macros:
s/SPRN_DAWR/SPRN_DAWR0/
s/SPRN_DAWRX/SPRN_DAWRX0/
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Michael Neuling <mikey@neuling.org>
Link: https://lore.kernel.org/r/20200514111741.97993-2-ravi.bangoria@linux.ibm.com
Do not allow placing xmon breakpoints on the suffix of a prefix
instruction.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
[mpe: Don't split printf strings across lines]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200506034050.24806-27-jniethe5@gmail.com
For powerpc64, redefine the ppc_inst type so both word and prefixed
instructions can be represented. On powerpc32 the type will remain the
same. Update places which had assumed instructions to be 4 bytes long.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Reviewed-by: Alistair Popple <alistair@popple.id.au>
[mpe: Rework the get_user_inst() macros to be parameterised, and don't
assign to the dest if an error occurred. Use CONFIG_PPC64 not
__powerpc64__ in a few places. Address other comments from
Christophe. Fix some sparse complaints.]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200506034050.24806-24-jniethe5@gmail.com
When a new breakpoint is created, the second instruction of that
breakpoint is patched with a trap instruction. This assumes the length
of the instruction is always the same. In preparation for prefixed
instructions, remove this assumption. Insert the trap instruction at the
same time the first instruction is inserted.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Alistair Popple <alistair@popple.id.au>
Link: https://lore.kernel.org/r/20200506034050.24806-20-jniethe5@gmail.com
Currently in xmon, mread() is used for reading instructions. In
preparation for prefixed instructions, create and use a new function,
mread_instr(), especially for reading instructions.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Alistair Popple <alistair@popple.id.au>
Link: https://lore.kernel.org/r/20200506034050.24806-19-jniethe5@gmail.com
Prefixed instructions will mean there are instructions of different
length. As a result dereferencing a pointer to an instruction will not
necessarily give the desired result. Introduce a function for reading
instructions from memory into the instruction data type.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Alistair Popple <alistair@popple.id.au>
Link: https://lore.kernel.org/r/20200506034050.24806-13-jniethe5@gmail.com
Currently unsigned ints are used to represent instructions on powerpc.
This has worked well as instructions have always been 4 byte words.
However, ISA v3.1 introduces some changes to instructions that mean
this scheme will no longer work as well. This change is Prefixed
Instructions. A prefixed instruction is made up of a word prefix
followed by a word suffix to make an 8 byte double word instruction.
No matter the endianness of the system the prefix always comes first.
Prefixed instructions are only planned for powerpc64.
Introduce a ppc_inst type to represent both prefixed and word
instructions on powerpc64 while keeping it possible to exclusively
have word instructions on powerpc32.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
[mpe: Fix compile error in emulate_spe()]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200506034050.24806-12-jniethe5@gmail.com
In preparation for an instruction data type that can not be directly
used with the '==' operator use functions for checking equality.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Balamuruhan S <bala24@linux.ibm.com>
Link: https://lore.kernel.org/r/20200506034050.24806-11-jniethe5@gmail.com
In preparation for introducing a more complicated instruction type to
accommodate prefixed instructions use an accessor for getting an
instruction as a u32.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200506034050.24806-8-jniethe5@gmail.com
In preparation for instructions having a more complex data type start
using a macro, ppc_inst(), for making an instruction out of a u32. A
macro is used so that instructions can be used as initializer elements.
Currently this does nothing, but it will allow for creating a data type
that can represent prefixed instructions.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
[mpe: Change include guard to _ASM_POWERPC_INST_H]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Alistair Popple <alistair@popple.id.au>
Link: https://lore.kernel.org/r/20200506034050.24806-7-jniethe5@gmail.com
A modulo operation is used for calculating the current offset from a
breakpoint within the breakpoint table. As instruction lengths are
always a power of 2, this can be replaced with a bitwise 'and'. The
current check for word alignment can be replaced with checking that the
lower 2 bits are not set.
Suggested-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Alistair Popple <alistair@popple.id.au>
Link: https://lore.kernel.org/r/20200506034050.24806-5-jniethe5@gmail.com
The instructions for xmon's breakpoint are stored bpt_table[] which is in
the data section. This is problematic as the data section may be marked
as no execute. Move bpt_table[] to the text section.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200506034050.24806-4-jniethe5@gmail.com
To execute an instruction out of line after a breakpoint, the NIP is set
to the address of struct bpt::instr. Here a copy of the instruction that
was replaced with a breakpoint is kept, along with a trap so normal flow
can be resumed after XOLing. The struct bpt's are located within the
data section. This is problematic as the data section may be marked as
no execute.
Instead of each struct bpt holding the instructions to be XOL'd, make a
new array, bpt_table[], with enough space to hold instructions for the
number of supported breakpoints. A later patch will move this to the
text section.
Make struct bpt::instr a pointer to the instructions in bpt_table[]
associated with that breakpoint. This association is a simple mapping:
bpts[n] -> bpt_table[n * words per breakpoint]. Currently we only need
the copied instruction followed by a trap, so 2 words per breakpoint.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Alistair Popple <alistair@popple.id.au>
Link: https://lore.kernel.org/r/20200506034050.24806-3-jniethe5@gmail.com
For modifying instructions in xmon, patch_instruction() can serve the
same role that store_inst() is performing with the advantage of not
being specific to xmon. In some places patch_instruction() is already
being using followed by store_inst(). In these cases just remove the
store_inst(). Otherwise replace store_inst() with patch_instruction().
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Link: https://lore.kernel.org/r/20200506034050.24806-2-jniethe5@gmail.com
With earlier commits, the API no longer discards the const-ness of the
sysrq_key_op. As such we can add the notation.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: linux-kernel@vger.kernel.org
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: linuxppc-dev@lists.ozlabs.org
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://lore.kernel.org/r/20200513214351.2138580-6-emil.l.velikov@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A new system call interrupt will be added with a new trap number.
Hide the explicit 0xc00 test behind an accessor to reduce churn
in callers.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Make it a static inline]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200507121332.2233629-3-mpe@ellerman.id.au
The pt_regs.trap field keeps 4 low bits for some metadata about the
trap or how it was handled, which is masked off in order to test the
architectural trap number.
Add a set_trap() accessor to set this, equivalent to TRAP() for
returning it. This is actually not quite the equivalent of TRAP()
because it always clears the low bits, which may be harmless if
it can only be updated via ptrace syscall, but it seems dangerous.
In fact settting TRAP from ptrace doesn't seem like a great idea
so maybe it's better deleted.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Make it a static inline rather than a shouty macro]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200507121332.2233629-2-mpe@ellerman.id.au
Declaring setjmp()/longjmp() as taking longs makes the signature
non-standard, and makes clang complain. In the past, this has been
worked around by adding -ffreestanding to the compile flags.
The implementation looks like it only ever propagates the value
(in longjmp) or sets it to 1 (in setjmp), and we only call longjmp
with integer parameters.
This allows removing -ffreestanding from the compilation flags.
Fixes: c9029ef9c9 ("powerpc: Avoid clang warnings around setjmp and longjmp")
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: Clement Courbet <courbet@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200330080400.124803-1-courbet@google.com
The reason debuggers add an ASCII dump to other types of memory dumps
is to give the user visual reference points in the case that ASCII
strings are adjacent to other structures or element. For example,
when examining the task_struct structure one can look for the comm[]
string and use it to locate other important elements.
ASCII strings do not have endianess, they exist in memory in the same
order regardless of CPU endianess. ASCII strings are, by definition,
human readable and so should be presented in a human readable format.
For these reasons, the supplemental ASCII dump does not re-order
the strings from memory to match the endianess of the corresponding
16, 32, or 64 bit words. That would make the ASCII dump much less
useful.
Signed-off-by: Douglas Miller <dougmill@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1488205694-13337-1-git-send-email-dougmill@linux.vnet.ibm.com
In xmon we have two variables that are used by the dump commands.
There's ndump which is the number of bytes to dump using 'd', and
nidump which is the number of instructions to dump using 'di'.
ndump starts as 64 and nidump starts as 16, but both can be set by the
user.
It's fairly common to be pasting addresses into xmon when trying to
debug something, and if you inadvertently double paste an address like
so:
0:mon> di c000000002101f6c c000000002101f6c
The second value is interpreted as the number of instructions to dump.
Luckily it doesn't dump 13 quintrillion instructions, the value is
limited to MAX_DUMP (128K). But as each instruction is dumped on a
single line, that's still a lot of output. If you're on a slow console
that can take multiple minutes to print. If you were "just popping in
and out of xmon quickly before the RCU/hardlockup detector fires" you
are now having a bad day.
Things are not as bad with 'd' because we print 16 bytes per line, so
it's fewer lines. But it's still quite a lot.
So shrink the maximum for 'd' to 64K (one page), which is 4096 lines.
For 'di' add a new limit which is the above / 4 - because instructions
are 4 bytes, meaning again we can dump one page.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200219110007.31195-1-mpe@ellerman.id.au
The ls (lookup symbol) and zr (reboot) commands use xmon's getstring()
helper to read a string argument from the xmon prompt. This function
skips over leading whitespace, but doesn't check if the first
"non-whitespace" character is a newline which causes some odd
behaviour (<enter> indicates a the enter key was pressed):
0:mon> ls printk<enter>
printk: c0000000001680c4
0:mon> ls<enter>
printk<enter>
Symbol '
printk' not found.
0:mon>
With commit 2d9b332d99 ("powerpc/xmon: Allow passing an argument to
ppc_md.restart()") we have a similar problem with the zr command.
Previously zr took no arguments so "zr<enter> would trigger a reboot.
With that patch applied a second newline needs to be sent in order for
the reboot to occur. Fix this by checking if the leading whitespace
ended on a newline:
0:mon> ls<enter>
Symbol '' not found.
Fixes: 2d9b332d99 ("powerpc/xmon: Allow passing an argument to ppc_md.restart()")
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200217041343.2454-1-oohall@gmail.com
Fix couple of compile errors I stumbled upon with CONFIG_XMON=y and
CONFIG_XMON_DISASSEMBLY=n
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200123010455.GA15080@us.ibm.com
On PowerNV a few different kinds of reboot are supported. We'd like to be
able to exercise these from xmon so allow 'zr' to take an argument, and
pass that to the ppc_md.restart() function.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191101085522.3055-1-oohall@gmail.com
ASDR is HV-privileged and must only be accessed in HV-mode.
Fixes a Program Check (0x700) when xmon in a VM dumps SPRs.
Fixes: d1e1b351f5 ("powerpc/xmon: Add ISA v3.0 SPRs to SPR dump")
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200107021633.GB29843@us.ibm.com
Commit aea447141c ("powerpc: Disable -Wbuiltin-requires-header when
setjmp is used") disabled -Wbuiltin-requires-header because of a
warning about the setjmp and longjmp declarations.
r367387 in clang added another diagnostic around this, complaining
that there is no jmp_buf declaration.
In file included from ../arch/powerpc/xmon/xmon.c:47:
../arch/powerpc/include/asm/setjmp.h:10:13: error: declaration of
built-in function 'setjmp' requires the declaration of the 'jmp_buf'
type, commonly provided in the header <setjmp.h>.
[-Werror,-Wincomplete-setjmp-declaration]
extern long setjmp(long *);
^
../arch/powerpc/include/asm/setjmp.h:11:13: error: declaration of
built-in function 'longjmp' requires the declaration of the 'jmp_buf'
type, commonly provided in the header <setjmp.h>.
[-Werror,-Wincomplete-setjmp-declaration]
extern void longjmp(long *, long);
^
2 errors generated.
We are not using the standard library's longjmp/setjmp implementations
for obvious reasons; make this clear to clang by using -ffreestanding
on these files.
Cc: stable@vger.kernel.org # 4.14+
Suggested-by: Segher Boessenkool <segher@kernel.crashing.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191119045712.39633-3-natechancellor@gmail.com
Xmon should be either fully or partially disabled depending on the
kernel lockdown state.
Put xmon into read-only mode for lockdown=integrity and prevent user
entry into xmon when lockdown=confidentiality. Xmon checks the lockdown
state on every attempted entry:
(1) during early xmon'ing
(2) when triggered via sysrq
(3) when toggled via debugfs
(4) when triggered via a previously enabled breakpoint
The following lockdown state transitions are handled:
(1) lockdown=none -> lockdown=integrity
set xmon read-only mode
(2) lockdown=none -> lockdown=confidentiality
clear all breakpoints, set xmon read-only mode,
prevent user re-entry into xmon
(3) lockdown=integrity -> lockdown=confidentiality
clear all breakpoints, set xmon read-only mode,
prevent user re-entry into xmon
Suggested-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Christopher M. Riedl <cmr@informatik.wtf>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190907061124.1947-3-cmr@informatik.wtf
Read-only mode should not prevent listing and clearing any active
breakpoints.
Tested-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Christopher M. Riedl <cmr@informatik.wtf>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190907061124.1947-2-cmr@informatik.wtf
When looping on the list of interrupts, add the current value of the
PQ bits with a load on the ESB page. This has the side effect of
faulting the ESB page of all interrupts.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190910081850.26038-2-clg@kaod.org
Modify the xmon 'dxi' command to query all interrupts if no IRQ number
is specified.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190814154754.23682-4-clg@kaod.org
The xmon 'dxi' command calls OPAL to query the XIVE configuration of a
interrupt. This can only be done on baremetal (PowerNV) and it will
crash a pseries machine.
Introduce a new XIVE get_irq_config() operation which implements a
different query depending on the platform, PowerNV or pseries, and
modify xmon to use a top level wrapper.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190814154754.23682-3-clg@kaod.org
Currently, the xmon 'dx' command calls OPAL to dump the XIVE state in
the OPAL logs and also outputs some of the fields of the internal XIVE
structures in Linux. The OPAL calls can only be done on baremetal
(PowerNV) and they crash a pseries machine. Fix by checking the
hypervisor feature of the CPU.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190814154754.23682-2-clg@kaod.org
Notable changes:
- Removal of the NPU DMA code, used by the out-of-tree Nvidia driver, as well
as some other functions only used by drivers that haven't (yet?) made it
upstream.
- A fix for a bug in our handling of hardware watchpoints (eg. perf record -e
mem: ...) which could lead to register corruption and kernel crashes.
- Enable HAVE_ARCH_HUGE_VMAP, which allows us to use large pages for vmalloc
when using the Radix MMU.
- A large but incremental rewrite of our exception handling code to use gas
macros rather than multiple levels of nested CPP macros.
And the usual small fixes, cleanups and improvements.
Thanks to:
Alastair D'Silva, Alexey Kardashevskiy, Andreas Schwab, Aneesh Kumar K.V, Anju
T Sudhakar, Anton Blanchard, Arnd Bergmann, Athira Rajeev, Cédric Le Goater,
Christian Lamparter, Christophe Leroy, Christophe Lombard, Christoph Hellwig,
Daniel Axtens, Denis Efremov, Enrico Weigelt, Frederic Barrat, Gautham R.
Shenoy, Geert Uytterhoeven, Geliang Tang, Gen Zhang, Greg Kroah-Hartman, Greg
Kurz, Gustavo Romero, Krzysztof Kozlowski, Madhavan Srinivasan, Masahiro
Yamada, Mathieu Malaterre, Michael Neuling, Nathan Lynch, Naveen N. Rao,
Nicholas Piggin, Nishad Kamdar, Oliver O'Halloran, Qian Cai, Ravi Bangoria,
Sachin Sant, Sam Bobroff, Satheesh Rajendran, Segher Boessenkool, Shaokun
Zhang, Shawn Anastasio, Stewart Smith, Suraj Jitindar Singh, Thiago Jung
Bauermann, YueHaibing.
-----BEGIN PGP SIGNATURE-----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=3dBZ
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Notable changes:
- Removal of the NPU DMA code, used by the out-of-tree Nvidia driver,
as well as some other functions only used by drivers that haven't
(yet?) made it upstream.
- A fix for a bug in our handling of hardware watchpoints (eg. perf
record -e mem: ...) which could lead to register corruption and
kernel crashes.
- Enable HAVE_ARCH_HUGE_VMAP, which allows us to use large pages for
vmalloc when using the Radix MMU.
- A large but incremental rewrite of our exception handling code to
use gas macros rather than multiple levels of nested CPP macros.
And the usual small fixes, cleanups and improvements.
Thanks to: Alastair D'Silva, Alexey Kardashevskiy, Andreas Schwab,
Aneesh Kumar K.V, Anju T Sudhakar, Anton Blanchard, Arnd Bergmann,
Athira Rajeev, Cédric Le Goater, Christian Lamparter, Christophe
Leroy, Christophe Lombard, Christoph Hellwig, Daniel Axtens, Denis
Efremov, Enrico Weigelt, Frederic Barrat, Gautham R. Shenoy, Geert
Uytterhoeven, Geliang Tang, Gen Zhang, Greg Kroah-Hartman, Greg Kurz,
Gustavo Romero, Krzysztof Kozlowski, Madhavan Srinivasan, Masahiro
Yamada, Mathieu Malaterre, Michael Neuling, Nathan Lynch, Naveen N.
Rao, Nicholas Piggin, Nishad Kamdar, Oliver O'Halloran, Qian Cai, Ravi
Bangoria, Sachin Sant, Sam Bobroff, Satheesh Rajendran, Segher
Boessenkool, Shaokun Zhang, Shawn Anastasio, Stewart Smith, Suraj
Jitindar Singh, Thiago Jung Bauermann, YueHaibing"
* tag 'powerpc-5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (163 commits)
powerpc/powernv/idle: Fix restore of SPRN_LDBAR for POWER9 stop state.
powerpc/eeh: Handle hugepages in ioremap space
ocxl: Update for AFU descriptor template version 1.1
powerpc/boot: pass CONFIG options in a simpler and more robust way
powerpc/boot: add {get, put}_unaligned_be32 to xz_config.h
powerpc/irq: Don't WARN continuously in arch_local_irq_restore()
powerpc/module64: Use symbolic instructions names.
powerpc/module32: Use symbolic instructions names.
powerpc: Move PPC_HA() PPC_HI() and PPC_LO() to ppc-opcode.h
powerpc/module64: Fix comment in R_PPC64_ENTRY handling
powerpc/boot: Add lzo support for uImage
powerpc/boot: Add lzma support for uImage
powerpc/boot: don't force gzipped uImage
powerpc/8xx: Add microcode patch to move SMC parameter RAM.
powerpc/8xx: Use IO accessors in microcode programming.
powerpc/8xx: replace #ifdefs by IS_ENABLED() in microcode.c
powerpc/8xx: refactor programming of microcode CPM params.
powerpc/8xx: refactor printing of microcode patch name.
powerpc/8xx: Refactor microcode write
powerpc/8xx: refactor writing of CPM microcode arrays
...
Even when we have HugeTLB and THP disabled, kernel linear map can still be
mapped with hugepages. This is only an issue with radix translation because hash
MMU doesn't map kernel linear range in linux page table and other kernel
map areas are not mapped using hugepage.
Add config independent helpers and put WARN_ON() when we don't expect things
to be mapped via hugepages.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The bad stack test in interrupt handlers has a few problems. For
performance it is taken in the common case, which is a fetch bubble
and a waste of i-cache.
For code development and maintainence, it requires yet another stack
frame setup routine, and that constrains all exception handlers to
follow the same register save pattern which inhibits future
optimisation.
Remove the test/branch and replace it with a trap. Teach the program
check handler to use the emergency stack for this case.
This does not result in quite so nice a message, however the SRR0 and
SRR1 of the crashed interrupt can be seen in r11 and r12, as is the
original r1 (adjusted by INT_FRAME_SIZE). These are the most important
parts to debugging the issue.
The original r9-12 and cr0 is lost, which is the main downside.
kernel BUG at linux/arch/powerpc/kernel/exceptions-64s.S:847!
Oops: Exception in kernel mode, sig: 5 [#1]
BE SMP NR_CPUS=2048 NUMA PowerNV
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted
NIP: c000000000009108 LR: c000000000cadbcc CTR: c0000000000090f0
REGS: c0000000fffcbd70 TRAP: 0700 Not tainted
MSR: 9000000000021032 <SF,HV,ME,IR,DR,RI> CR: 28222448 XER: 20040000
CFAR: c000000000009100 IRQMASK: 0
GPR00: 000000000000003d fffffffffffffd00 c0000000018cfb00 c0000000f02b3166
GPR04: fffffffffffffffd 0000000000000007 fffffffffffffffb 0000000000000030
GPR08: 0000000000000037 0000000028222448 0000000000000000 c000000000ca8de0
GPR12: 9000000002009032 c000000001ae0000 c000000000010a00 0000000000000000
GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR20: c0000000f00322c0 c000000000f85200 0000000000000004 ffffffffffffffff
GPR24: fffffffffffffffe 0000000000000000 0000000000000000 000000000000000a
GPR28: 0000000000000000 0000000000000000 c0000000f02b391c c0000000f02b3167
NIP [c000000000009108] decrementer_common+0x18/0x160
LR [c000000000cadbcc] .vsnprintf+0x3ec/0x4f0
Call Trace:
Instruction dump:
996d098a 994d098b 38610070 480246ed 48005518 60000000 38200000 718a4000
7c2a0b78 3821fd00 41c20008 e82d0970 <0981fd00> f92101a0 f9610170 f9810178
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
