Commit Graph

10 Commits

Author SHA1 Message Date
Geert Uytterhoeven
2e7c416cba ARM: dts: imx: Use generic uart-has-rtscts DT property
As of commit 1006ed7e1b ("serial: imx: Use generic uart-has-rtscts
DT property"), the Freescale IMX UART driver recognizes the generic
"uart-has-rtscts" DT property, deprecating the vendor-specific
"fsl,uart-has-rtscts" DT property. Hence replace the latter by the
former in all DTS files.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-11 14:48:05 +08:00
Sudeep Holla
26cefdd15d ARM: dts: imx: replace legacy wakeup property with 'wakeup-source'
Though the keyboard and other driver will continue to support the legacy
"gpio-key,wakeup", "linux,wakeup" and "enable-sdio-wakeup" boolean
property to enable the wakeup source, "wakeup-source" is the new
standard binding.

This patch replaces all the legacy wakeup properties with the unified
"wakeup-source" property in order to avoid any futher copy-paste
duplication.

Cc: Sascha Hauer <kernel@pengutronix.de>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-02-29 16:14:31 +08:00
Fabio Estevam
d23dfefaf0 ARM: dts: imx6sl-warp: Add changes for rev1.12
Warp board rev1.12 is the version of the hardware that will be publicly
available for the customers.

It uses UART5 as the Bluetooth serial port as well as some
additional signals for HOSTWAKE on Wifi and Bluetooth.

Make the changes to support the rev1.12 hardware.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-08-11 23:15:11 +08:00
Fabio Estevam
6e2a92b26d ARM: dts: imx6sl-warp: Add the SD2_RESET pin
imx6sl-warp has SD2_RESET pin connected to the eMMC reset line,
so add this pin to the usdhc2 group.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-07-15 10:20:34 +08:00
Fabio Estevam
0c1e18963d ARM: dts: imx6sl-warp: Fix OTG roles
USBOTG1 always work on peripheral mode and USBOTG in host mode, so fix
their roles accordingly.

Tested by mounting the MMC card as a storage device:

modprobe g_mass_storage file=/dev/mmcblk0p2

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03 15:03:58 +08:00
Fabio Estevam
d000d5e129 ARM: dts: imx6sl-warp: Remove USB regulators
According to the warp schematics there are no regulators for the USB OTG
ports, so let's remove them.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03 15:03:58 +08:00
Fabio Estevam
e6c8b3d49c ARM: dts: imx6sl-warp: Remove unused regulator
The 'reg_1p8v' regulator is not used anywhere, so let's remove it.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03 15:03:58 +08:00
Fabio Estevam
159097f86d ARM: dts: imx6sl-warp: Add BCM4330 support
Warp has a Murata chip based on a BCM4330 that provides Wifi and Bluetooth
functionality.

Add support for it.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-03-30 16:43:50 +08:00
Fabio Estevam
649b1fe856 ARM: dts: imx6sl-warp: Pass 'bus-width' property
USDHC2 port uses all the 8 data signals, so pass the 'bus-width' property
accordingly.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-03-30 16:43:34 +08:00
Otavio Salvador
27b0b9d851 ARM: dts: warp: Add initial WaRP Board support
The WaRP Board is a Wearable Reference Plaform. The board features:

 - Freescale i.MX6 SoloLite processor with 512MB of RAM
 - Freescale FXOS8700CQ 6-axis Xtrinsic sensor
 - Freescale Kinetis KL16 MCU
 - Freescale Xtrinsic MMA955xL intelligent motion sensing platform

The board implements a hybrid architecture to address the evolving
needs of the wearables market. The platform consists of a main board
and an example daughtercard with the ability to add additional
daughtercards for different usage models.

For more information about the project, visit:

 http://www.warpboard.org/

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-03-30 16:42:23 +08:00