This patch reverts commit 8e5fc1a (perf_events: Fix transaction
recovery in group_sched_in()) because it had one flaw in case the
group could never be scheduled. It would cause time_enabled to get
negative.
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4cbeeeb7.0aefd80a.6e40.0e2f@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Dima noticed that we fail to correct the ->vruntime of sleeping tasks
when we move them between cgroups.
Reported-by: Dima Zavin <dima@android.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Tested-by: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1287150604.29097.1513.camel@twins>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (71 commits)
powerpc/44x: Update ppc44x_defconfig
powerpc/watchdog: Make default timeout for Book-E watchdog a Kconfig option
fsl_rio: Add comments for sRIO registers.
powerpc/fsl-booke: Add e55xx (64-bit) smp defconfig
powerpc/fsl-booke: Add p5020 DS board support
powerpc/fsl-booke64: Use TLB CAMs to cover linear mapping on FSL 64-bit chips
powerpc/fsl-booke: Add support for FSL Arch v1.0 MMU in setup_page_sizes
powerpc/fsl-booke: Add support for FSL 64-bit e5500 core
powerpc/85xx: add cache-sram support
powerpc/85xx: add ngPIXIS FPGA device tree node to the P1022DS board
powerpc: Fix compile error with paca code on ppc64e
powerpc/fsl-booke: Add p3041 DS board support
oprofile/fsl emb: Don't set MSR[PMM] until after clearing the interrupt.
powerpc/fsl-booke: Add PCI device ids for P2040/P3041/P5010/P5020 QoirQ chips
powerpc/mpc8xxx_gpio: Add support for 'qoriq-gpio' controllers
powerpc/fsl_booke: Add support to boot from core other than 0
powerpc/p1022: Add probing for individual DMA channels
powerpc/fsl_soc: Search all global-utilities nodes for rstccr
powerpc: Fix invalid page flags in create TLB CAM path for PTE_64BIT
powerpc/mpc83xx: Support for MPC8308 P1M board
...
Fix up conflict with the generic irq_work changes in arch/powerpc/kernel/time.c
* 'core-memblock-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (74 commits)
x86-64: Only set max_pfn_mapped to 512 MiB if we enter via head_64.S
xen: Cope with unmapped pages when initializing kernel pagetable
memblock, bootmem: Round pfn properly for memory and reserved regions
memblock: Annotate memblock functions with __init_memblock
memblock: Allow memblock_init to be called early
memblock/arm: Fix memblock_region_is_memory() typo
x86, memblock: Remove __memblock_x86_find_in_range_size()
memblock: Fix wraparound in find_region()
x86-32, memblock: Make add_highpages honor early reserved ranges
x86, memblock: Fix crashkernel allocation
arm, memblock: Fix the sparsemem build
memblock: Fix section mismatch warnings
powerpc, memblock: Fix memblock API change fallout
memblock, microblaze: Fix memblock API change fallout
x86: Remove old bootmem code
x86, memblock: Use memblock_memory_size()/memblock_free_memory_size() to get correct dma_reserve
x86: Remove not used early_res code
x86, memblock: Replace e820_/_early string with memblock_
x86: Use memblock to replace early_res
x86, memblock: Use memblock_debug to control debug message print out
...
Fix up trivial conflicts in arch/x86/kernel/setup.c and kernel/Makefile
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (278 commits)
arm: remove machine_desc.io_pg_offst and .phys_io
arm: use addruart macro to establish debug mappings
arm: return both physical and virtual addresses from addruart
arm/debug: consolidate addruart macros for CONFIG_DEBUG_ICEDCC
ARM: make struct machine_desc definition coherent with its comment
eukrea_mbimxsd-baseboard: Pass the correct GPIO to gpio_free
cpuimx27: fix compile when ULPI is selected
mach-pcm037_eet: fix compile errors
Fixing ethernet driver compilation error for i.MX31 ADS board
cpuimx51: update board support
mx5: add cpuimx51sd module and its baseboard
iomux-mx51: fix GPIO_1_xx 's IOMUX configuration
imx-esdhc: update devices registration
mx51: add resources for SD/MMC on i.MX51
iomux-mx51: fix SD1 and SD2's iomux configuration
clock-mx51: rename CLOCK1 to CLOCK_CCGR for better readability
clock-mx51: factorize clk_set_parent and clk_get_rate
eukrea_mbimxsd: add support for DVI displays
cpuimx25 & cpuimx35: fix OTG port registration in host mode
i.MX31 and i.MX35 : fix errate TLSbo65953 and ENGcm09472
...
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (96 commits)
apic, x86: Use BIOS settings for IBS and MCE threshold interrupt LVT offsets
apic, x86: Check if EILVT APIC registers are available (AMD only)
x86: ioapic: Call free_irte only if interrupt remapping enabled
arm: Use ARCH_IRQ_INIT_FLAGS
genirq, ARM: Fix boot on ARM platforms
genirq: Fix CONFIG_GENIRQ_NO_DEPRECATED=y build
x86: Switch sparse_irq allocations to GFP_KERNEL
genirq: Switch sparse_irq allocator to GFP_KERNEL
genirq: Make sparse_lock a mutex
x86: lguest: Use new irq allocator
genirq: Remove the now unused sparse irq leftovers
genirq: Sanitize dynamic irq handling
genirq: Remove arch_init_chip_data()
x86: xen: Sanitise sparse_irq handling
x86: Use sane enumeration
x86: uv: Clean up the direct access to irq_desc
x86: Make io_apic.c local functions static
genirq: Remove irq_2_iommu
x86: Speed up the irq_remapped check in hot pathes
intr_remap: Simplify the code further
...
Fix up trivial conflicts in arch/x86/Kconfig
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (29 commits)
sched: Export account_system_vtime()
sched: Call tick_check_idle before __irq_enter
sched: Remove irq time from available CPU power
sched: Do not account irq time to current task
x86: Add IRQ_TIME_ACCOUNTING
sched: Add IRQ_TIME_ACCOUNTING, finer accounting of irq time
sched: Add a PF flag for ksoftirqd identification
sched: Consolidate account_system_vtime extern declaration
sched: Fix softirq time accounting
sched: Drop group_capacity to 1 only if local group has extra capacity
sched: Force balancing on newidle balance if local group has capacity
sched: Set group_imb only a task can be pulled from the busiest cpu
sched: Do not consider SCHED_IDLE tasks to be cache hot
sched: Drop all load weight manipulation for RT tasks
sched: Create special class for stop/migrate work
sched: Unindent labels
sched: Comment updates: fix default latency and granularity numbers
tracing/sched: Add sched_pi_setprio tracepoint
sched: Give CPU bound RT tasks preference
sched: Try not to migrate higher priority RT tasks
...
* 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
lockdep: Check the depth of subclass
lockdep: Add improved subclass caching
affs: Use sema_init instead of init_MUTEX
hfs: Convert tree_lock to mutex
arm: Bcmring: semaphore cleanup
printk: Make console_sem a semaphore not a pseudo mutex
drivers/macintosh/adb: Do not claim that the semaphore is a mutex
parport: Semaphore cleanup
irda: Semaphore cleanup
net: Wan/cosa.c: Convert "mutex" to semaphore
net: Ppp_async: semaphore cleanup
hamradio: Mkiss: semaphore cleanup
hamradio: 6pack: semaphore cleanup
net: 3c527: semaphore cleanup
input: Serio/hp_sdc: semaphore cleanup
input: Serio/hil_mlc: semaphore cleanup
input: Misc/hp_sdc_rtc: semaphore cleanup
lockup_detector: Make callback function static
lockup detector: Fix grammar by adding a missing "to" in the comments
lockdep: Remove __debug_show_held_locks
With the addition of trace_softirq_raise() the softirq tracepoint got
even more convoluted. Why the tracepoints take two pointers to assign
an integer is beyond my comprehension.
But adding an extra case which treats the first pointer as an unsigned
long when the second pointer is NULL including the back and forth
type casting is just horrible.
Convert the softirq tracepoints to take a single unsigned int argument
for the softirq vector number and fix the call sites.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <alpine.LFD.2.00.1010191428560.6815@localhost6.localdomain6>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: mathieu.desnoyers@efficios.com
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
The tracing per_cpu buffers were limited to 999 CPUs for a mear
savings in stack space of a char array. Up the array to 30 characters
which is more than enough to hold a 64 bit number.
Reported-by: Robin Holt <holt@sgi.com>
Suggested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
All security modules shouldn't change sched_param parameter of
security_task_setscheduler(). This is not only meaningless, but also
make a harmful result if caller pass a static variable.
This patch remove policy and sched_param parameter from
security_task_setscheduler() becuase none of security module is
using it.
Cc: James Morris <jmorris@namei.org>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: James Morris <jmorris@namei.org>
With the binding of time extends to events we no longer need to use
the macro RB_TIMESTAMPS_PER_PAGE. Remove it.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There's a condition to check if we should add a time extend or
not in the fast path. But this condition is racey (in the sense
that we can add a unnecessary time extend, but nothing that
can break anything). We later check if the time or event time
delta should be zero or have real data in it (not racey), making
this first check redundant.
This check may help save space once in a while, but really is
not worth the hassle to try to save some space that happens at
most 134 ms at a time.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When the time between two timestamps is greater than
2^27 nanosecs (~134 ms) a time extend event is added that extends
the time difference to 59 bits (~18 years). This is due to
events only having a 27 bit field to store time.
Currently this time extend is a separate event. We add it just before
the event data that is being written to the buffer. But before
the event data is committed, the event data can also be discarded (as
with the case of filters). But because the time extend has already been
committed, it will stay in the buffer.
If lots of events are being filtered and no event is being
written, then every 134ms a time extend can be added to the buffer
without any data attached. To keep from filling the entire buffer
with time extends, a time extend will never be the first event
in a page because the page timestamp can be used. Time extends can
only fill the rest of a page with some data at the beginning.
This patch binds the time extend with the data. The difference here
is that the time extend is not committed before the data is added.
Instead, when a time extend is needed, the space reserved on
the ring buffer is the time extend + the data event size. The
time extend is added to the first part of the reserved block and
the data is added to the second. The time extend event is passed
back to the reserver, but since the reserver also uses a function
to find the data portion of the reserved block, no changes to the
ring buffer interface need to be made.
When a commit is discarded, we now remove both the time extend and
the event. With this approach no more than one time extend can
be in the buffer in a row. Data must always follow a time extend.
Thanks to Mathieu Desnoyers for suggesting this idea.
Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The delta between events is passed to the timestamp code by reference
and the timestamp code will reset the value. But it can be reset
from the caller. No need to pass it in by reference.
By changing the call to pass by value, lets gcc optimize the code
a bit more where it can store the delta in a register and not
worry about updating the reference.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The original code for the ring buffer had locations that modified
the timestamp and that change was used by the callers. Now,
the timestamp is not reused by the callers and there is no reason
to pass it by reference.
By changing the call to pass by value, lets gcc optimize the code
a bit more where it can store the timestamp in a register and not
worry about updating the reference.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Gcc inlines the slow path of the ring buffer write which can
hurt performance. This patch simply forces the slow path function
rb_move_tail() to always be a function.
The ring_buffer_benchmark module with reader_disabled=1 shows that
this patch changes the time to record an event from 135 ns to
132 ns. (3 ns or 2.22% improvement)
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The function start_func_tracer() was incorrectly added in the
#ifdef CONFIG_FUNCTION_TRACER condition, but is still used even
when function tracing is not enabled.
The calls to register_ftrace_function() and register_ftrace_graph()
become nops (and their arguments are even ignored), thus there is
no reason to hide start_func_tracer() when function tracing is
not enabled.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
futex_wait() is leaking key references due to futex_wait_setup()
acquiring an additional reference via the queue_lock() routine. The
nested key ref-counting has been masking bugs and complicating code
analysis. queue_lock() is only called with a previously ref-counted
key, so remove the additional ref-counting from the queue_(un)lock()
functions.
Also futex_wait_requeue_pi() drops one key reference too many in
unqueue_me_pi(). Remove the key reference handling from
unqueue_me_pi(). This was paired with a queue_lock() in
futex_lock_pi(), so the count remains unchanged.
Document remaining nested key ref-counting sites.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Reported-and-tested-by: Matthieu Fertré<matthieu.fertre@kerlabs.com>
Reported-by: Louis Rilling<louis.rilling@kerlabs.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
LKML-Reference: <4CBB17A8.70401@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@kernel.org
According to Jens, this code does not need the BKL at all,
it is sufficiently serialized by bd_mutex.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Jens Axboe <jaxboe@fusionio.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
The big kernel lock is going away, so make sure
that if it is disabled by Kconfig, we do not
try to validate it, which would result in
compile errors.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Commit a25909a4 (lockdep: Add an in_workqueue_context() lockdep-based
test function) added in_workqueue_context() but there hasn't been any
in-kernel user and the lockdep annotation in workqueue is scheduled to
change. Remove the unused function.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The documentation for schedule_on_each_cpu() states that it calls a
function on each online CPU from keventd. This can easily be
interpreted as an asyncronous call because the description does not
mention that flush_work is called. Clarify that it is synchronous.
tj: rephrased a bit
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
When CPU is idle and on first interrupt, irq_enter calls tick_check_idle()
to notify interruption from idle. But, there is a problem if this call
is done after __irq_enter, as all routines in __irq_enter may find
stale time due to yet to be done tick_check_idle.
Specifically, trace calls in __irq_enter when they use global clock and also
account_system_vtime change in this patch as it wants to use sched_clock_cpu()
to do proper irq timing.
But, tick_check_idle was moved after __irq_enter intentionally to
prevent problem of unneeded ksoftirqd wakeups by the commit ee5f80a:
irq: call __irq_enter() before calling the tick_idle_check
Impact: avoid spurious ksoftirqd wakeups
Moving tick_check_idle() before __irq_enter and wrapping it with
local_bh_enable/disable would solve both the problems.
Fixed-by: Yong Zhang <yong.zhang0@gmail.com>
Signed-off-by: Venkatesh Pallipadi <venki@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1286237003-12406-9-git-send-email-venki@google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The idea was suggested by Peter Zijlstra here:
http://marc.info/?l=linux-kernel&m=127476934517534&w=2
irq time is technically not available to the tasks running on the CPU.
This patch removes irq time from CPU power piggybacking on
sched_rt_avg_update().
Tested this by keeping CPU X busy with a network intensive task having 75%
oa a single CPU irq processing (hard+soft) on a 4-way system. And start seven
cycle soakers on the system. Without this change, there will be two tasks on
each CPU. With this change, there is a single task on irq busy CPU X and
remaining 7 tasks are spread around among other 3 CPUs.
Signed-off-by: Venkatesh Pallipadi <venki@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1286237003-12406-8-git-send-email-venki@google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Scheduler accounts both softirq and interrupt processing times to the
currently running task. This means, if the interrupt processing was
for some other task in the system, then the current task ends up being
penalized as it gets shorter runtime than otherwise.
Change sched task accounting to acoount only actual task time from
currently running task. Now update_curr(), modifies the delta_exec to
depend on rq->clock_task.
Note that this change only handles CONFIG_IRQ_TIME_ACCOUNTING case. We can
extend this to CONFIG_VIRT_CPU_ACCOUNTING with minimal effort. But, thats
for later.
This change will impact scheduling behavior in interrupt heavy conditions.
Tested on a 4-way system with eth0 handled by CPU 2 and a network heavy
task (nc) running on CPU 3 (and no RSS/RFS). With that I have CPU 2
spending 75%+ of its time in irq processing. CPU 3 spending around 35%
time running nc task.
Now, if I run another CPU intensive task on CPU 2, without this change
/proc/<pid>/schedstat shows 100% of time accounted to this task. With this
change, it rightly shows less than 25% accounted to this task as remaining
time is actually spent on irq processing.
Signed-off-by: Venkatesh Pallipadi <venki@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1286237003-12406-7-git-send-email-venki@google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
s390/powerpc/ia64 have support for CONFIG_VIRT_CPU_ACCOUNTING which does
the fine granularity accounting of user, system, hardirq, softirq times.
Adding that option on archs like x86 will be challenging however, given the
state of TSC reliability on various platforms and also the overhead it will
add in syscall entry exit.
Instead, add a lighter variant that only does finer accounting of
hardirq and softirq times, providing precise irq times (instead of timer tick
based samples). This accounting is added with a new config option
CONFIG_IRQ_TIME_ACCOUNTING so that there won't be any overhead for users not
interested in paying the perf penalty.
This accounting is based on sched_clock, with the code being generic.
So, other archs may find it useful as well.
This patch just adds the core logic and does not enable this logic yet.
Signed-off-by: Venkatesh Pallipadi <venki@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1286237003-12406-5-git-send-email-venki@google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
To account softirq time cleanly in scheduler, we need to identify whether
softirq is invoked in ksoftirqd context or softirq at hardirq tail context.
Add PF_KSOFTIRQD for that purpose.
As all PF flag bits are currently taken, create space by moving one of the
infrequently used bits (PF_THREAD_BOUND) down in task_struct to be along
with some other state fields.
Signed-off-by: Venkatesh Pallipadi <venki@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1286237003-12406-4-git-send-email-venki@google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Peter Zijlstra found a bug in the way softirq time is accounted in
VIRT_CPU_ACCOUNTING on this thread:
http://lkml.indiana.edu/hypermail//linux/kernel/1009.2/01366.html
The problem is, softirq processing uses local_bh_disable internally. There
is no way, later in the flow, to differentiate between whether softirq is
being processed or is it just that bh has been disabled. So, a hardirq when bh
is disabled results in time being wrongly accounted as softirq.
Looking at the code a bit more, the problem exists in !VIRT_CPU_ACCOUNTING
as well. As account_system_time() in normal tick based accouting also uses
softirq_count, which will be set even when not in softirq with bh disabled.
Peter also suggested solution of using 2*SOFTIRQ_OFFSET as irq count
for local_bh_{disable,enable} and using just SOFTIRQ_OFFSET while softirq
processing. The patch below does that and adds API in_serving_softirq() which
returns whether we are currently processing softirq or not.
Also changes one of the usages of softirq_count in net/sched/cls_cgroup.c
to in_serving_softirq.
Looks like many usages of in_softirq really want in_serving_softirq. Those
changes can be made individually on a case by case basis.
Signed-off-by: Venkatesh Pallipadi <venki@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1286237003-12406-2-git-send-email-venki@google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When SD_PREFER_SIBLING is set on a sched domain, drop group_capacity to 1
only if the local group has extra capacity. The extra check prevents the case
where you always pull from the heaviest group when it is already under-utilized
(possible with a large weight task outweighs the tasks on the system).
For example, consider a 16-cpu quad-core quad-socket machine with MC and NUMA
scheduling domains. Let's say we spawn 15 nice0 tasks and one nice-15 task,
and each task is running on one core. In this case, we observe the following
events when balancing at the NUMA domain:
- find_busiest_group() will always pick the sched group containing the niced
task to be the busiest group.
- find_busiest_queue() will then always pick one of the cpus running the
nice0 task (never picks the cpu with the nice -15 task since
weighted_cpuload > imbalance).
- The load balancer fails to migrate the task since it is the running task
and increments sd->nr_balance_failed.
- It repeats the above steps a few more times until sd->nr_balance_failed > 5,
at which point it kicks off the active load balancer, wakes up the migration
thread and kicks the nice 0 task off the cpu.
The load balancer doesn't stop until we kick out all nice 0 tasks from
the sched group, leaving you with 3 idle cpus and one cpu running the
nice -15 task.
When balancing at the NUMA domain, we drop sgs.group_capacity to 1 if the child
domain (in this case MC) has SD_PREFER_SIBLING set. Subsequent load checks are
not relevant because the niced task has a very large weight.
In this patch, we add an extra condition to the "if(prefer_sibling)" check in
update_sd_lb_stats(). We drop the capacity of a group only if the local group
has extra capacity, ie. nr_running < group_capacity. This patch preserves the
original intent of the prefer_siblings check (to spread tasks across the system
in low utilization scenarios) and fixes the case above.
It helps in the following ways:
- In low utilization cases (where nr_tasks << nr_cpus), we still drop
group_capacity down to 1 if we prefer siblings.
- On very busy systems (where nr_tasks >> nr_cpus), sgs.nr_running will most
likely be > sgs.group_capacity.
- When balancing large weight tasks, if the local group does not have extra
capacity, we do not pick the group with the niced task as the busiest group.
This prevents failed balances, active migration and the under-utilization
described above.
Signed-off-by: Nikhil Rao <ncrao@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1287173550-30365-5-git-send-email-ncrao@google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch forces a load balance on a newly idle cpu when the local group has
extra capacity and the busiest group does not have any. It improves system
utilization when balancing tasks with a large weight differential.
Under certain situations, such as a niced down task (i.e. nice = -15) in the
presence of nr_cpus NICE0 tasks, the niced task lands on a sched group and
kicks away other tasks because of its large weight. This leads to sub-optimal
utilization of the machine. Even though the sched group has capacity, it does
not pull tasks because sds.this_load >> sds.max_load, and f_b_g() returns NULL.
With this patch, if the local group has extra capacity, we shortcut the checks
in f_b_g() and try to pull a task over. A sched group has extra capacity if the
group capacity is greater than the number of running tasks in that group.
Thanks to Mike Galbraith for discussions leading to this patch and for the
insight to reuse SD_NEWIDLE_BALANCE.
Signed-off-by: Nikhil Rao <ncrao@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1287173550-30365-4-git-send-email-ncrao@google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When cycling through sched groups to determine the busiest group, set
group_imb only if the busiest cpu has more than 1 runnable task. This patch
fixes the case where two cpus in a group have one runnable task each, but there
is a large weight differential between these two tasks. The load balancer is
unable to migrate any task from this group, and hence do not consider this
group to be imbalanced.
Signed-off-by: Nikhil Rao <ncrao@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1286996978-7007-3-git-send-email-ncrao@google.com>
[ small code readability edits ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch adds a check in task_hot to return if the task has SCHED_IDLE
policy. SCHED_IDLE tasks have very low weight, and when run with regular
workloads, are typically scheduled many milliseconds apart. There is no
need to consider these tasks hot for load balancing.
Signed-off-by: Nikhil Rao <ncrao@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1287173550-30365-2-git-send-email-ncrao@google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Trades a call + conditional + ret for an unconditional jmp.
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20101014203625.501657727@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Now that there's still only a few users around, rename things to make
them more consistent.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20101014203625.448565169@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
hw_breakpoint creation needs to account stuff per-task to ensure there
is always sufficient hardware resources to back these things due to
ptrace.
With the perf per pmu context changes the event initialization no
longer has access to the event context, for the simple reason that we
need to first find the pmu (result of initialization) before we can
find the context.
This makes hw_breakpoints unhappy, because it can no longer do per
task accounting, cure this by frobbing a task pointer in the event::hw
bits for now...
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20101014203625.391543667@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
So that we can pass the task pointer to the event allocation, so that
we can use task associated data during event initialization.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20101014203625.340789919@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Currently it looks like find_lively_task_by_vpid() takes a task ref
and relies on find_get_context() to drop it.
The problem is that perf_event_create_kernel_counter() shouldn't be
dropping task refs.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Matt Helsley <matthltc@us.ibm.com>
LKML-Reference: <20101014203625.278436085@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Matt found we trigger the WARN_ON_ONCE() in perf_group_attach() when we take
the move_group path in perf_event_open().
Since we cannot de-construct the group (we rely on it to move the events), we
have to simply ignore the double attach. The group state is context invariant
and doesn't need changing.
Reported-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1287135757.29097.1368.camel@twins>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Provide a mechanism that allows running code in IRQ context. It is
most useful for NMI code that needs to interact with the rest of the
system -- like wakeup a task to drain buffers.
Perf currently has such a mechanism, so extract that and provide it as
a generic feature, independent of perf so that others may also
benefit.
The IRQ context callback is generated through self-IPIs where
possible, or on architectures like powerpc the decrementer (the
built-in timer facility) is set to generate an interrupt immediately.
Architectures that don't have anything like this get to do with a
callback from the timer tick. These architectures can call
irq_work_run() at the tail of any IRQ handlers that might enqueue such
work (like the perf IRQ handler) to avoid undue latencies in
processing the work.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Kyle McMartin <kyle@mcmartin.ca>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
[ various fixes ]
Signed-off-by: Huang Ying <ying.huang@intel.com>
LKML-Reference: <1287036094.7768.291.camel@yhuang-dev>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The group_sched_in() function uses a transactional approach to schedule
a group of events. In a group, either all events can be scheduled or
none are. To schedule each event in, the function calls event_sched_in().
In case of error, event_sched_out() is called on each event in the group.
The problem is that event_sched_out() does not completely cancel the
effects of event_sched_in(). Furthermore event_sched_out() changes the
state of the event as if it had run which is not true is this particular
case.
Those inconsistencies impact time tracking fields and may lead to events
in a group not all reporting the same time_enabled and time_running values.
This is demonstrated with the example below:
$ task -eunhalted_core_cycles,baclears,baclears -e unhalted_core_cycles,baclears,baclears sleep 5
1946101 unhalted_core_cycles (32.85% scaling, ena=829181, run=556827)
11423 baclears (32.85% scaling, ena=829181, run=556827)
7671 baclears (0.00% scaling, ena=556827, run=556827)
2250443 unhalted_core_cycles (57.83% scaling, ena=962822, run=405995)
11705 baclears (57.83% scaling, ena=962822, run=405995)
11705 baclears (57.83% scaling, ena=962822, run=405995)
Notice that in the first group, the last baclears event does not
report the same timings as its siblings.
This issue comes from the fact that tstamp_stopped is updated
by event_sched_out() as if the event had actually run.
To solve the issue, we must ensure that, in case of error, there is
no change in the event state whatsoever. That means timings must
remain as they were when entering group_sched_in().
To do this we defer updating tstamp_running until we know the
transaction succeeded. Therefore, we have split event_sched_in()
in two parts separating the update to tstamp_running.
Similarly, in case of error, we do not want to update tstamp_stopped.
Therefore, we have split event_sched_out() in two parts separating
the update to tstamp_stopped.
With this patch, we now get the following output:
$ task -eunhalted_core_cycles,baclears,baclears -e unhalted_core_cycles,baclears,baclears sleep 5
2492050 unhalted_core_cycles (71.75% scaling, ena=1093330, run=308841)
11243 baclears (71.75% scaling, ena=1093330, run=308841)
11243 baclears (71.75% scaling, ena=1093330, run=308841)
1852746 unhalted_core_cycles (0.00% scaling, ena=784489, run=784489)
9253 baclears (0.00% scaling, ena=784489, run=784489)
9253 baclears (0.00% scaling, ena=784489, run=784489)
Note that the uneven timing between groups is a side effect of
the process spending most of its time sleeping, i.e., not enough
event rotations (but that's a separate issue).
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4cb86b4c.41e9d80a.44e9.3e19@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
You can only call update_context_time() when the context
is active, i.e., the thread it is attached to is still running.
However, perf_event_read() can be called even when the context
is inactive, e.g., user read() the counters. The call to
update_context_time() must be conditioned on the status of
the context, otherwise, bogus time_enabled, time_running may
be returned. Here is an example on AMD64. The task program
is an example from libpfm4. The -p prints deltas every 1s.
$ task -p -e cpu_clk_unhalted sleep 5
2,266,610 cpu_clk_unhalted (0.00% scaling, ena=2,158,982, run=2,158,982)
0 cpu_clk_unhalted (0.00% scaling, ena=2,158,982, run=2,158,982)
0 cpu_clk_unhalted (0.00% scaling, ena=2,158,982, run=2,158,982)
0 cpu_clk_unhalted (0.00% scaling, ena=2,158,982, run=2,158,982)
0 cpu_clk_unhalted (0.00% scaling, ena=2,158,982, run=2,158,982)
5,242,358,071 cpu_clk_unhalted (99.95% scaling, ena=5,000,359,984, run=2,319,270)
Whereas if you don't read deltas, e.g., no call to perf_event_read() until
the process terminates:
$ task -e cpu_clk_unhalted sleep 5
2,497,783 cpu_clk_unhalted (0.00% scaling, ena=2,376,899, run=2,376,899)
Notice that time_enable, time_running are bogus in the first example
causing bogus scaling.
This patch fixes the problem, by conditionally calling update_context_time()
in perf_event_read().
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: stable@kernel.org
LKML-Reference: <4cb856dc.51edd80a.5ae0.38fb@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Current look_up_lock_class() doesn't check the parameter "subclass".
This rarely rises problems because the main caller of this function,
register_lock_class(), checks it.
But register_lock_class() is not the only function which calls
look_up_lock_class(). lock_set_class() and its callees also call it.
And lock_set_class() doesn't check this parameter.
This will rise problems when the the value of subclass is larger than
MAX_LOCKDEP_SUBCLASSES. Because the address (used as the key of class)
caliculated with too large subclass has a probability to point
another key in different lock_class_key.
Of course this problem depends on the memory layout and
occurs with really low probability.
Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Vojtech Pavlik <vojtech@ucw.cz>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1286958626-986-1-git-send-email-mitake@dcl.info.waseda.ac.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Current lockdep_map only caches one class with subclass == 0,
and looks up hash table of classes when subclass != 0.
It seems that this has no problem because the case of
subclass != 0 is rare. But locks of struct rq are
acquired with subclass == 1 when task migration is executed.
Task migration is high frequent event, so I modified lockdep
to cache subclasses.
I measured the score of perf bench sched messaging.
This patch has slightly but certain (order of milli seconds
or 10 milli seconds) effect when lots of tasks are running.
I'll show the result in the tail of this description.
NR_LOCKDEP_CACHING_CLASSES specifies how many classes can be
cached in the instances of lockdep_map.
I discussed with Peter Zijlstra in LinuxCon Japan about
this approach and he taught me that caching every subclasses(8)
is cleary waste of memory. So number of cached classes
should be configurable.
=== Score comparison of benchmarks ===
# "min" means best score, and "max" means worst score
for i in `seq 1 10`; do ./perf bench -f simple sched messaging; done
before: min: 0.565000, max: 0.583000, avg: 0.572500
after: min: 0.559000, max: 0.568000, avg: 0.563300
# with more processes
for i in `seq 1 10`; do ./perf bench -f simple sched messaging -g 40; done
before: min: 2.274000, max: 2.298000, avg: 2.286300
after: min: 2.242000, max: 2.270000, avg: 2.259700
Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1286269311-28336-2-git-send-email-mitake@dcl.info.waseda.ac.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Load weights are for the CFS, they do not belong in the RT task. This makes all
RT scheduling classes leave the CFS weights alone.
This fixes a real bug as well: I noticed the following phonomena: a process
elevated to SCHED_RR forks with SCHED_RESET_ON_FORK set, and the child is
indeed SCHED_OTHER, and the niceval is indeed reset to 0. However the weight
inserted by set_load_weight() remains at 0, giving the task insignificat
priority.
With this fix, the weight is reset to what the task had before being elevated
to SCHED_RR/SCHED_FIFO.
Cc: Lennart Poettering <lennart@poettering.net>
Cc: stable@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1286807811-10568-1-git-send-email-linus.walleij@stericsson.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In order to separate the stop/migrate work thread from the SCHED_FIFO
implementation, create a special class for it that is of higher priority than
SCHED_FIFO itself.
This currently solves a problem where cpu-hotplug consumes so much cpu-time
that the SCHED_FIFO class gets throttled, but has the bandwidth replenishment
timer pending on the now dead cpu.
It is also required for when we add the planned deadline scheduling class above
SCHED_FIFO, as the stop/migrate thread still needs to transcent those tasks.
Tested-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1285165776.2275.1022.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Labels should be on column 0.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Even though the parent is recorded with the normal function tracing
of the latency tracers (irqsoff and wakeup), the function graph
recording is bogus.
This is due to the function graph messing with the return stack.
The latency tracers pass in as the parent CALLER_ADDR0, which
works fine for plain function tracing. But this causes bogus output
with the graph tracer:
3) <idle>-0 | d.s3. 0.000 us | return_to_handler();
3) <idle>-0 | d.s3. 0.000 us | _raw_spin_unlock_irqrestore();
3) <idle>-0 | d.s3. 0.000 us | return_to_handler();
3) <idle>-0 | d.s3. 0.000 us | trace_hardirqs_on();
The "return_to_handle()" call is the trampoline of the
function graph tracer, and is meaningless in this context.
Cc: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The preempt and irqsoff tracers have three types of function tracers.
Normal function tracer, function graph entry, and function graph return.
Each of these use a complex dance to prevent recursion and whether
to trace the data or not (depending if interrupts are enabled or not).
This patch moves the duplicate code into a single routine, to
prevent future mistakes with modifying duplicate complex code.
Cc: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The wakeup tracer has three types of function tracers. Normal
function tracer, function graph entry, and function graph return.
Each of these use a complex dance to prevent recursion and whether
to trace the data or not (depending on the wake_task variable).
This patch moves the duplicate code into a single routine, to
prevent future mistakes with modifying duplicate complex code.
Cc: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add function graph support for wakeup latency tracer.
The graph output is enabled by setting the 'display-graph'
trace option.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
LKML-Reference: <1285243253-7372-4-git-send-email-jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Move trace_graph_function() and print_graph_headers_flags() functions
to the trace_function_graph.c to be globaly available.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
LKML-Reference: <1285243253-7372-3-git-send-email-jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The check_irq_entry and check_irq_return could be called
from graph event context. In such case there's no graph
private data allocated. Adding checks to handle this case.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
LKML-Reference: <20100924154102.GB1818@jolsa.brq.redhat.com>
[ Fixed some grammar in the comments ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
SoCs have a standard set of tuples consisting of frequency and
voltage pairs that the device will support per voltage domain. These
are called Operating Performance Points or OPPs. The actual
definitions of OPP varies over silicon versions. For a specific domain,
we can have a set of {frequency, voltage} pairs. As the kernel boots
and more information is available, a default set of these are activated
based on the precise nature of device. Further on operation, based on
conditions prevailing in the system (such as temperature), some OPP
availability may be temporarily controlled by the SoC frameworks.
To implement an OPP, some sort of power management support is necessary
hence this library depends on CONFIG_PM.
Contributions include:
Sanjeev Premi for the initial concept:
http://patchwork.kernel.org/patch/50998/
Kevin Hilman for converting original design to device-based.
Kevin Hilman and Paul Walmsey for cleaning up many of the function
abstractions, improvements and data structure handling.
Romit Dasgupta for using enums instead of opp pointers.
Thara Gopinath, Eduardo Valentin and Vishwanath BS for fixes and
cleanups.
Linus Walleij for recommending this layer be made generic for usage
in other architectures beyond OMAP and ARM.
Mark Brown, Andrew Morton, Rafael J. Wysocki, Paul E. McKenney for
valuable improvements.
Discussions and comments from:
http://marc.info/?l=linux-omap&m=126033945313269&w=2http://marc.info/?l=linux-omap&m=125482970102327&w=2http://marc.info/?t=125809247500002&r=1&w=2http://marc.info/?l=linux-omap&m=126025973426007&w=2http://marc.info/?t=128152609200064&r=1&w=2http://marc.info/?t=128468723000002&r=1&w=2
incorporated.
v1: http://marc.info/?t=128468723000002&r=1&w=2
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
If the device which fails to resume is part of a loadable kernel module
it won't be checked at startup against the magic number stored in the
RTC.
Add a read-only sysfs attribute /sys/power/pm_trace_dev_match which
contains a list of newline separated devices (usually just the one)
which currently match the last magic number. This allows the device
which is failing to resume to be found after the modules are loaded
again.
Signed-off-by: James Hogan <james@albanarts.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Since we are adding compression to the kernel's hibernate code,
change signature used by it to mark swap spaces, so that earlier
kernels don't attempt to restore compressed images they cannot
handle.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
If there is a wakeup event during the freezing of tasks, suspend or
hibernation will fail anyway. Since try_to_freeze_tasks() can take
up to 20 seconds to complete or fail, aborting it as soon as a wakeup
event is detected improves the worst case wakeup latency.
Based on a patch from Arve Hjønnevåg.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
The hibernate resume code checks if there is an image to resume from
on every boot and, if the kernel is built with CONFIG_PM_DEBUG set
and the image is not present, it prints some scary messages
suggesting there was a boot error of some sort. Apparently, some
users are confused by them, so make them look less scary and adjust
the other hibernate resume debug messages to match them.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Introduce struct wakeup_source for representing system wakeup sources
within the kernel and for collecting statistics related to them.
Make the recently introduced helper functions pm_wakeup_event(),
pm_stay_awake() and pm_relax() use struct wakeup_source objects
internally, so that wakeup statistics associated with wakeup devices
can be collected and reported in a consistent way (the definition of
pm_relax() is changed, which is harmless, because this function is
not called directly by anyone yet). Introduce new wakeup-related
sysfs device attributes in /sys/devices/.../power for reporting the
device wakeup statistics.
Change the global wakeup events counters event_count and
events_in_progress into atomic variables, so that it is not necessary
to acquire a global spinlock in pm_wakeup_event(), pm_stay_awake()
and pm_relax(), which should allow us to avoid lock contention in
these functions on SMP systems with many wakeup devices.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
The default hibernation image size is currently hard coded and euqal
to 500 MB, which is not a reasonable default on many contemporary
systems. Make it equal 2/5 of the total RAM size (this is slightly
below the maximum, i.e. 1/2 of the total RAM size, and seems to be
generally suitable).
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Tested-by: M. Vefa Bicakci <bicave@superonline.com>
One comment in hibernate_preallocate_memory() is wrong, so fix it and
add one more comment to clarify the meaning of the fixed one.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Although we need the PM workqueue to be freezable, we don't need it
to be singlethread. Also, the number of concurrent work items
running on a single CPU need not be constrained. For these reasons
use alloc_workqueue() directly, with suitable arguments, instead of
create_freezeable_workqueue(), to create the runtime PM workqueue.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Tejun Heo <tj@kernel.org>
Fix the following build warning:
warning: (PM_SLEEP_SMP && SMP && (ARCH_SUSPEND_POSSIBLE || \
ARCH_HIBERNATION_POSSIBLE) && PM_SLEEP) selects HOTPLUG_CPU which \
has unmet direct dependencies (SMP && HOTPLUG)
by selecting HOTPLUG along with CPU_HOTPLUG.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Compress hibernation image with LZO in order to save on I/O and
therefore time to hibernate/thaw.
[rjw: Added hibernate=nocompress command line option instead of just
nocompress which would be confusing, fixed a couple of compiler
warnings, fixed kerneldoc comments, minor cleanups.]
Signed-off-by: Bojan Smojver <bojan@rexursive.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
sysctl check complains with a WARN() when proc_doulongvec_minmax() or
proc_doulongvec_ms_jiffies_minmax() are used by a vector of longs (with
more than one element), with no min or max value specified.
This is unexpected, given we had a bug on this min/max handling :)
Reported-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: David Miller <davem@davemloft.net>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
All file_operations should get a .llseek operation so we can make
nonseekable_open the default for future file operations without a
.llseek pointer.
The three cases that we can automatically detect are no_llseek, seq_lseek
and default_llseek. For cases where we can we can automatically prove that
the file offset is always ignored, we use noop_llseek, which maintains
the current behavior of not returning an error from a seek.
New drivers should normally not use noop_llseek but instead use no_llseek
and call nonseekable_open at open time. Existing drivers can be converted
to do the same when the maintainer knows for certain that no user code
relies on calling seek on the device file.
The generated code is often incorrectly indented and right now contains
comments that clarify for each added line why a specific variant was
chosen. In the version that gets submitted upstream, the comments will
be gone and I will manually fix the indentation, because there does not
seem to be a way to do that using coccinelle.
Some amount of new code is currently sitting in linux-next that should get
the same modifications, which I will do at the end of the merge window.
Many thanks to Julia Lawall for helping me learn to write a semantic
patch that does all this.
===== begin semantic patch =====
// This adds an llseek= method to all file operations,
// as a preparation for making no_llseek the default.
//
// The rules are
// - use no_llseek explicitly if we do nonseekable_open
// - use seq_lseek for sequential files
// - use default_llseek if we know we access f_pos
// - use noop_llseek if we know we don't access f_pos,
// but we still want to allow users to call lseek
//
@ open1 exists @
identifier nested_open;
@@
nested_open(...)
{
<+...
nonseekable_open(...)
...+>
}
@ open exists@
identifier open_f;
identifier i, f;
identifier open1.nested_open;
@@
int open_f(struct inode *i, struct file *f)
{
<+...
(
nonseekable_open(...)
|
nested_open(...)
)
...+>
}
@ read disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
<+...
(
*off = E
|
*off += E
|
func(..., off, ...)
|
E = *off
)
...+>
}
@ read_no_fpos disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
... when != off
}
@ write @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
<+...
(
*off = E
|
*off += E
|
func(..., off, ...)
|
E = *off
)
...+>
}
@ write_no_fpos @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
... when != off
}
@ fops0 @
identifier fops;
@@
struct file_operations fops = {
...
};
@ has_llseek depends on fops0 @
identifier fops0.fops;
identifier llseek_f;
@@
struct file_operations fops = {
...
.llseek = llseek_f,
...
};
@ has_read depends on fops0 @
identifier fops0.fops;
identifier read_f;
@@
struct file_operations fops = {
...
.read = read_f,
...
};
@ has_write depends on fops0 @
identifier fops0.fops;
identifier write_f;
@@
struct file_operations fops = {
...
.write = write_f,
...
};
@ has_open depends on fops0 @
identifier fops0.fops;
identifier open_f;
@@
struct file_operations fops = {
...
.open = open_f,
...
};
// use no_llseek if we call nonseekable_open
////////////////////////////////////////////
@ nonseekable1 depends on !has_llseek && has_open @
identifier fops0.fops;
identifier nso ~= "nonseekable_open";
@@
struct file_operations fops = {
... .open = nso, ...
+.llseek = no_llseek, /* nonseekable */
};
@ nonseekable2 depends on !has_llseek @
identifier fops0.fops;
identifier open.open_f;
@@
struct file_operations fops = {
... .open = open_f, ...
+.llseek = no_llseek, /* open uses nonseekable */
};
// use seq_lseek for sequential files
/////////////////////////////////////
@ seq depends on !has_llseek @
identifier fops0.fops;
identifier sr ~= "seq_read";
@@
struct file_operations fops = {
... .read = sr, ...
+.llseek = seq_lseek, /* we have seq_read */
};
// use default_llseek if there is a readdir
///////////////////////////////////////////
@ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier readdir_e;
@@
// any other fop is used that changes pos
struct file_operations fops = {
... .readdir = readdir_e, ...
+.llseek = default_llseek, /* readdir is present */
};
// use default_llseek if at least one of read/write touches f_pos
/////////////////////////////////////////////////////////////////
@ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read.read_f;
@@
// read fops use offset
struct file_operations fops = {
... .read = read_f, ...
+.llseek = default_llseek, /* read accesses f_pos */
};
@ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write.write_f;
@@
// write fops use offset
struct file_operations fops = {
... .write = write_f, ...
+ .llseek = default_llseek, /* write accesses f_pos */
};
// Use noop_llseek if neither read nor write accesses f_pos
///////////////////////////////////////////////////////////
@ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
identifier write_no_fpos.write_f;
@@
// write fops use offset
struct file_operations fops = {
...
.write = write_f,
.read = read_f,
...
+.llseek = noop_llseek, /* read and write both use no f_pos */
};
@ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write_no_fpos.write_f;
@@
struct file_operations fops = {
... .write = write_f, ...
+.llseek = noop_llseek, /* write uses no f_pos */
};
@ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
@@
struct file_operations fops = {
... .read = read_f, ...
+.llseek = noop_llseek, /* read uses no f_pos */
};
@ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
@@
struct file_operations fops = {
...
+.llseek = noop_llseek, /* no read or write fn */
};
===== End semantic patch =====
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Julia Lawall <julia@diku.dk>
Cc: Christoph Hellwig <hch@infradead.org>
The config option used by archs to let the build system know that
the C version of the recordmcount works for said arch is currently
called HAVE_C_MCOUNT_RECORD which enables BUILD_C_RECORDMCOUNT. To
be more consistent with the name that all archs may use, it has been
renamed to HAVE_C_RECORDMCOUNT. This will be less confusing since
we are building a C recordmcount and not a mcount_record.
Suggested-by: Ingo Molnar <mingo@elte.hu>
Cc: <linux-arch@vger.kernel.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: linux-kbuild@vger.kernel.org
Cc: John Reiser <jreiser@bitwagon.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This patch adds the support for the C version of recordmcount and
compile times show ~ 12% improvement.
After verifying this works, other archs can add:
HAVE_C_MCOUNT_RECORD
in its Kconfig and it will use the C version of recordmcount
instead of the perl version.
Cc: <linux-arch@vger.kernel.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: linux-kbuild@vger.kernel.org
Cc: John Reiser <jreiser@bitwagon.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The race is described as follows:
CPU X CPU Y
remove_hrtimer
// state & QUEUED == 0
timer->state = CALLBACK
unlock timer base
timer->f(n) //very long
hrtimer_start
lock timer base
remove_hrtimer // no effect
hrtimer_enqueue
timer->state = CALLBACK |
QUEUED
unlock timer base
hrtimer_start
lock timer base
remove_hrtimer
mode = INACTIVE
// CALLBACK bit lost!
switch_hrtimer_base
CALLBACK bit not set:
timer->base
changes to a
different CPU.
lock this CPU's timer base
The bug was introduced with commit ca109491f (hrtimer: removing all ur
callback modes) in 2.6.29
[ tglx: Feed new state via local variable and add a comment. ]
Signed-off-by: Salman Qazi <sqazi@google.com>
Cc: akpm@linux-foundation.org
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20101012142351.8485.21823.stgit@dungbeetle.mtv.corp.google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@kernel.org
Targeted preemption latency and minimal preemption granularity
for CPU-bound tasks have been changed.
This patch updates the comments about these values.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <20101014160913.eb24fef4.yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Convert futex_requeue() function parameters to use @name
kernel-doc notation and add @fshared & @cmpval to prevent
kernel-doc warnings.
Add @list to struct futex_q.
Fix a few typos.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
LKML-Reference: <20101013110234.89b06043.randy.dunlap@oracle.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Fix selftest to clear flags field for reusing probes
because the flags field can be modified by Kprobes.
This also set NULL to kprobe.addr instead of 0.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: 2nddept-manager@sdl.hitachi.co.jp
LKML-Reference: <20101014031024.4100.50107.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Fix
kernel/trace/trace_functions_graph.c: In function ‘trace_print_graph_duration’:
kernel/trace/trace_functions_graph.c:652: warning: comparison of distinct pointer types lacks a cast
when building 36-rc6 on a 32-bit due to the strict type check failing
in the min() macro.
Signed-off-by: Borislav Petkov <bp@alien8.de>
Cc: Chase Douglas <chase.douglas@canonical.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <20100929080823.GA13595@liondog.tnic>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
This option can be set to verify the full conversion to the new chip
functions. Fix the fallout of the patch rework, so the core code
compiles and works with it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Time stamps for the ring buffer are created by the difference between
two events. Each page of the ring buffer holds a full 64 bit timestamp.
Each event has a 27 bit delta stamp from the last event. The unit of time
is nanoseconds, so 27 bits can hold ~134 milliseconds. If two events
happen more than 134 milliseconds apart, a time extend is inserted
to add more bits for the delta. The time extend has 59 bits, which
is good for ~18 years.
Currently the time extend is committed separately from the event.
If an event is discarded before it is committed, due to filtering,
the time extend still exists. If all events are being filtered, then
after ~134 milliseconds a new time extend will be added to the buffer.
This can only happen till the end of the page. Since each page holds
a full timestamp, there is no reason to add a time extend to the
beginning of a page. Time extends can only fill a page that has actual
data at the beginning, so there is no fear that time extends will fill
more than a page without any data.
When reading an event, a loop is made to skip over time extends
since they are only used to maintain the time stamp and are never
given to the caller. As a paranoid check to prevent the loop running
forever, with the knowledge that time extends may only fill a page,
a check is made that tests the iteration of the loop, and if the
iteration is more than the number of time extends that can fit in a page
a warning is printed and the ring buffer is disabled (all of ftrace
is also disabled with it).
There is another event type that is called a TIMESTAMP which can
hold 64 bits of data in the theoretical case that two events happen
18 years apart. This code has not been implemented, but the name
of this event exists, as well as the structure for it. The
size of a TIMESTAMP is 16 bytes, where as a time extend is only
8 bytes. The macro used to calculate how many time extends can fit on
a page used the TIMESTAMP size instead of the time extend size
cutting the amount in half.
The following test case can easily trigger the warning since we only
need to have half the page filled with time extends to trigger the
warning:
# cd /sys/kernel/debug/tracing/
# echo function > current_tracer
# echo 'common_pid < 0' > events/ftrace/function/filter
# echo > trace
# echo 1 > trace_marker
# sleep 120
# cat trace
Enabling the function tracer and then setting the filter to only trace
functions where the process id is negative (no events), then clearing
the trace buffer to ensure that we have nothing in the buffer,
then write to trace_marker to add an event to the beginning of a page,
sleep for 2 minutes (only 35 seconds is probably needed, but this
guarantees the bug), and then finally reading the trace which will
trigger the bug.
This patch fixes the typo and prevents the false positive of that warning.
Reported-by: Hans J. Koch <hjk@linutronix.de>
Tested-by: Hans J. Koch <hjk@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Stable Kernel <stable@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
It needs to be investigated whether it can be replaced by a real
mutex, but that needs more thought.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Christoph Hellwig <hch@infradead.org>
LKML-Reference: <20100907125057.179587334@linutronix.de>
The allocator functions are now called outside of preempt disabled
regions. Switch to GFP_KERNEL.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
The move_irq_desc() function was only used due to the problem that the
allocator did not free the old descriptors. So the descriptors had to
be moved in create_irq_nr(). That's history.
The code would have never been able to move active interrupt
descriptors on affinity settings. That can be done in a completely
different way w/o all this horror.
Remove all of it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Use the cleanup functions of the dynamic allocator. No need to have
separate implementations.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
This function should have not been there in the first place.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
sparse irq sets up NR_IRQS_LEGACY irq descriptors and archs then go
ahead and allocate more.
Use the unused return value of arch_probe_nr_irqs() to let the
architecture return the number of early allocations. Fix up all users.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Make irq_to_desc_alloc_node() a wrapper around the new allocator.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Mark a range of interrupts as allocated. In the SPARSE_IRQ=n case we
need this to update the bitmap for the legacy irqs so the enumerator
via irq_get_next_irq() works.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
/proc/irq never removes any entries, but when irq descriptors can be
freed for real this is necessary. Otherwise we'd reference a freed
descriptor in /proc/irq/N
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
The current sparse_irq allocator has several short comings due to
failures in the design or the lack of it:
- Requires iteration over the number of active irqs to find a free slot
(Some architectures have grown their own workarounds for this)
- Removal of entries is not possible
- Racy between create_irq_nr and destroy_irq (plugged by horrible
callbacks)
- Migration of active irq descriptors is not possible
- No bulk allocation of irq ranges
- Sprinkeled irq_desc references all over the place outside of kernel/irq/
(The previous chip functions series is addressing this issue)
Implement a sane allocator which fixes the above short comings (though
migration of active descriptors needs a full tree wide cleanup of the
direct and mostly unlocked access to irq_desc).
The new allocator still uses a radix_tree, but uses a bitmap for
keeping track of allocated irq numbers. That allows:
- Fast lookup of a free slot
- Allows the removal of descriptors
- Prevents the create/destroy race
- Bulk allocation of consecutive irq ranges
- Basic design is ready for migration of life descriptors after
further cleanups
The bitmap is also used in the SPARSE_IRQ=n case for lookup and
raceless (de)allocation of irq numbers. So it removes the requirement
for looping through the descriptor array to find slots.
Right now it uses sparse_irq_lock to protect the bitmap and the radix
tree, but after cleaning up all users we should be able convert that
to a mutex and to switch the radix_tree and decriptor allocations to
GFP_KERNEL.
[ Folded in a bugfix from Yinghai Lu ]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Arch code sets it's own irq_desc.status flags right after boot and for
dynamically allocated interrupts. That might involve iterating over a
huge array.
Allow ARCH_IRQ_INIT_FLAGS to set separate flags aside of IRQ_DISABLED
which is the default.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
The statistics accessor is only used by proc/stats and
show_interrupts(). Both are compiled in.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
early_init_irq_lock_class() is called way before anything touches the
irq descriptors. In case of SPARSE_IRQ=y this is a NOP operation
because the radix tree is empty at this point. For the SPARSE_IRQ=n
case it's sufficient to set the lock class in early_init_irq().
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
kernel/irq/handle.c has become a dumpground for random code in random
order. Split out the irq descriptor management and the dummy irq_chip
implementation into separate files. Cleanup the include maze while at
it.
No code change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Get the data structure from the core and provide inline wrappers to
access the irq_data members.
Provide accessor inlines for irq_data as well.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Provide a irq_desc.status modifier function to cleanup the direct
access to irq_desc in arch and driver code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
perf events: repair incorrect use of copy_from_user
This makes the perf_event_period() return 0 instead of
-EFAULT on success.
Signed-off-by: John Blackwood<john.blackwood@ccur.com>
Signed-off-by: Joe Korty <joe.korty@ccur.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20100928220311.GA18145@tsunami.ccur.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Reason for merge:
Forward-port urgent change to arch/x86/mm/srat_64.c to the memblock tree.
Resolved Conflicts:
arch/x86/mm/srat_64.c
Originally-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Introduce perf_pmu_name() helper function that returns the name of the
pmu. This gives us a generic way to get the name of a pmu regardless of
how an architecture identifies it internally.
Signed-off-by: Matt Fleming <matt@console-pimps.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Robert Richter <robert.richter@amd.com>
Add WQ_MEM_RECLAIM flag which currently maps to WQ_RESCUER, mark
WQ_RESCUER as internal and replace all external WQ_RESCUER usages to
WQ_MEM_RECLAIM.
This makes the API users express the intent of the workqueue instead
of indicating the internal mechanism used to guarantee forward
progress. This is also to make it cleaner to add more semantics to
WQ_MEM_RECLAIM. For example, if deemed necessary, memory reclaim
workqueues can be made highpri.
This patch doesn't introduce any functional change.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
The policy function keep_working() didn't check GCWQ_HIGHPRI_PENDING
and could return %false with highpri work pending. This could lead to
late execution of a highpri work which was delayed due to @max_active
throttling if other works are actively consuming CPU cycles.
For example, the following could happen.
1. Work W0 which burns CPU cycles.
2. Two works W1 and W2 are queued to a highpri wq w/ @max_active of 1.
3. W1 starts executing and W2 is put to delayed queue. W0 and W1 are
both runnable.
4. W1 finishes which puts W2 to pending queue but keep_working()
incorrectly returns %false and the worker goes to sleep.
5. W0 finishes and W2 starts execution.
With this patch applied, W2 starts execution as soon as W1 finishes.
Signed-off-by: Tejun Heo <tj@kernel.org>
* 'hwpoison-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-mce-2.6:
HWPOISON: Stop shrinking at right page count
HWPOISON: Report correct address granuality for AO huge page errors
HWPOISON: Copy si_addr_lsb to user
page-types.c: fix name of unpoison interface
When proc_doulongvec_minmax() is used with an array of longs, and no
min/max check requested (.extra1 or .extra2 being NULL), we dereference a
NULL pointer for the second element of the array.
Noticed while doing some changes in network stack for the "16TB problem"
Fix is to not change min & max pointers in __do_proc_doulongvec_minmax(),
so that all elements of the vector share an unique min/max limit, like
proc_dointvec_minmax().
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Americo Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This addresses the following RCU lockdep splat:
[0.051203] CPU0: AMD QEMU Virtual CPU version 0.12.4 stepping 03
[0.052999] lockdep: fixing up alternatives.
[0.054105]
[0.054106] ===================================================
[0.054999] [ INFO: suspicious rcu_dereference_check() usage. ]
[0.054999] ---------------------------------------------------
[0.054999] kernel/sched.c:616 invoked rcu_dereference_check() without protection!
[0.054999]
[0.054999] other info that might help us debug this:
[0.054999]
[0.054999]
[0.054999] rcu_scheduler_active = 1, debug_locks = 1
[0.054999] 3 locks held by swapper/1:
[0.054999] #0: (cpu_add_remove_lock){+.+.+.}, at: [<ffffffff814be933>] cpu_up+0x42/0x6a
[0.054999] #1: (cpu_hotplug.lock){+.+.+.}, at: [<ffffffff810400d8>] cpu_hotplug_begin+0x2a/0x51
[0.054999] #2: (&rq->lock){-.-...}, at: [<ffffffff814be2f7>] init_idle+0x2f/0x113
[0.054999]
[0.054999] stack backtrace:
[0.054999] Pid: 1, comm: swapper Not tainted 2.6.35 #1
[0.054999] Call Trace:
[0.054999] [<ffffffff81068054>] lockdep_rcu_dereference+0x9b/0xa3
[0.054999] [<ffffffff810325c3>] task_group+0x7b/0x8a
[0.054999] [<ffffffff810325e5>] set_task_rq+0x13/0x40
[0.054999] [<ffffffff814be39a>] init_idle+0xd2/0x113
[0.054999] [<ffffffff814be78a>] fork_idle+0xb8/0xc7
[0.054999] [<ffffffff81068717>] ? mark_held_locks+0x4d/0x6b
[0.054999] [<ffffffff814bcebd>] do_fork_idle+0x17/0x2b
[0.054999] [<ffffffff814bc89b>] native_cpu_up+0x1c1/0x724
[0.054999] [<ffffffff814bcea6>] ? do_fork_idle+0x0/0x2b
[0.054999] [<ffffffff814be876>] _cpu_up+0xac/0x127
[0.054999] [<ffffffff814be946>] cpu_up+0x55/0x6a
[0.054999] [<ffffffff81ab562a>] kernel_init+0xe1/0x1ff
[0.054999] [<ffffffff81003854>] kernel_thread_helper+0x4/0x10
[0.054999] [<ffffffff814c353c>] ? restore_args+0x0/0x30
[0.054999] [<ffffffff81ab5549>] ? kernel_init+0x0/0x1ff
[0.054999] [<ffffffff81003850>] ? kernel_thread_helper+0x0/0x10
[0.056074] Booting Node 0, Processors #1lockdep: fixing up alternatives.
[0.130045] #2lockdep: fixing up alternatives.
[0.203089] #3 Ok.
[0.275286] Brought up 4 CPUs
[0.276005] Total of 4 processors activated (16017.17 BogoMIPS).
The cgroup_subsys_state structures referenced by idle tasks are never
freed, because the idle tasks should be part of the root cgroup,
which is not removable.
The problem is that while we do in-fact hold rq->lock, the newly spawned
idle thread's cpu is not yet set to the correct cpu so the lockdep check
in task_group():
lockdep_is_held(&task_rq(p)->lock)
will fail.
But this is a chicken and egg problem. Setting the CPU's runqueue requires
that the CPU's runqueue already be set. ;-)
So insert an RCU read-side critical section to avoid the complaint.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Using ACCESS_ONCE() to observe the jiffies_stall/rnp->qsmask value
due to the caller didn't hold the root_rcu/rnp node's lock. Although
use without ACCESS_ONCE() is safe due to the value loaded being used
but once, the ACCESS_ONCE() is a good documentation aid -- the variables
are being loaded without the services of a lock.
Signed-off-by: Dongdong Deng <dongdong.deng@windriver.com>
CC: Dipankar Sarma <dipankar@in.ibm.com>
CC: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
> ===================================================
> [ INFO: suspicious rcu_dereference_check() usage. ]
> ---------------------------------------------------
> /home/greearb/git/linux.wireless-testing/kernel/sched.c:618 invoked rcu_dereference_check() without protection!
>
> other info that might help us debug this:
>
> rcu_scheduler_active = 1, debug_locks = 1
> 1 lock held by ifup/23517:
> #0: (&rq->lock){-.-.-.}, at: [<c042f782>] task_fork_fair+0x3b/0x108
>
> stack backtrace:
> Pid: 23517, comm: ifup Not tainted 2.6.36-rc6-wl+ #5
> Call Trace:
> [<c075e219>] ? printk+0xf/0x16
> [<c0455842>] lockdep_rcu_dereference+0x74/0x7d
> [<c0426854>] task_group+0x6d/0x79
> [<c042686e>] set_task_rq+0xe/0x57
> [<c042f79e>] task_fork_fair+0x57/0x108
> [<c042e965>] sched_fork+0x82/0xf9
> [<c04334b3>] copy_process+0x569/0xe8e
> [<c0433ef0>] do_fork+0x118/0x262
> [<c076302f>] ? do_page_fault+0x16a/0x2cf
> [<c044b80c>] ? up_read+0x16/0x2a
> [<c04085ae>] sys_clone+0x1b/0x20
> [<c04030a5>] ptregs_clone+0x15/0x30
> [<c0402f1c>] ? sysenter_do_call+0x12/0x38
Here a newly created task is having its runqueue assigned. The new task
is not yet on the tasklist, so cannot go away. This is therefore a false
positive, suppress with an RCU read-side critical section.
Reported-by: Ben Greear <greearb@candelatech.com
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Ben Greear <greearb@candelatech.com
The original hwpoison code added a new siginfo field si_addr_lsb to
pass the granuality of the fault address to user space. Unfortunately
this field was never copied to user space. Fix this here.
I added explicit checks for the MCEERR codes to avoid having
to patch all potential callers to initialize the field.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
As suggested by Linus, push the irqs_disabled() down to the
rcu_read_lock_bh_held() level so that all callers get the benefit
of the correct check.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
With all the recent module loading cleanups, we've minimized the code
that sits under module_mutex, fixing various deadlocks and making it
possible to do most of the module loading in parallel.
However, that whole conversion totally missed the rather obscure code
that adds a new module to the list for BUG() handling. That code was
doubly obscure because (a) the code itself lives in lib/bugs.c (for
dubious reasons) and (b) it gets called from the architecture-specific
"module_finalize()" rather than from generic code.
Calling it from arch-specific code makes no sense what-so-ever to begin
with, and is now actively wrong since that code isn't protected by the
module loading lock any more.
So this commit moves the "module_bug_{finalize,cleanup}()" calls away
from the arch-specific code, and into the generic code - and in the
process protects it with the module_mutex so that the list operations
are now safe.
Future fixups:
- move the module list handling code into kernel/module.c where it
belongs.
- get rid of 'module_bug_list' and just use the regular list of modules
(called 'modules' - imagine that) that we already create and maintain
for other reasons.
Reported-and-tested-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Adrian Bunk <bunk@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
These two tracepoints allow tracking when and how a work is queued and
activated. This patch is based on Frederic's patch to add queue_work
trace point.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Define workqueue_work event class and use it for workqueue_execute_end
trace point. Also, move trace/events/workqueue.h include downwards
such that all struct definitions are visible to it. This is to
prepare for more tracepoints and doesn't cause any functional change.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
The BKL is only used in remount_fs and get_sb that are both protected by
the superblocks s_umount rw_semaphore. Therefore it is safe to remove the
BKL entirely.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This patch is a preparation necessary to remove the BKL from do_new_mount().
It explicitly adds calls to lock_kernel()/unlock_kernel() around
get_sb/fill_super operations for filesystems that still uses the BKL.
I've read through all the code formerly covered by the BKL inside
do_kern_mount() and have satisfied myself that it doesn't need the BKL
any more.
do_kern_mount() is already called without the BKL when mounting the rootfs
and in nfsctl. do_kern_mount() calls vfs_kern_mount(), which is called
from various places without BKL: simple_pin_fs(), nfs_do_clone_mount()
through nfs_follow_mountpoint(), afs_mntpt_do_automount() through
afs_mntpt_follow_link(). Both later functions are actually the filesystems
follow_link inode operation. vfs_kern_mount() is calling the specified
get_sb function and lets the filesystem do its job by calling the given
fill_super function.
Therefore I think it is safe to push down the BKL from the VFS to the
low-level filesystems get_sb/fill_super operation.
[arnd: do not add the BKL to those file systems that already
don't use it elsewhere]
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Christoph Hellwig <hch@infradead.org>
This option covers now the old chip functions and the irq_desc data
fields which are moving to struct irq_data. More stuff will follow.
Pretty handy for testing a conversion, whether something broke or not.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
This patch fixes an error in perf_event_open() when the pid
provided by the user is invalid. find_lively_task_by_vpid()
does not return NULL on error but an error code. Without the
fix the error code was silently passed to find_get_context()
which would eventually cause a invalid pointer dereference.
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: peterz@infradead.org
Cc: paulus@samba.org
Cc: davem@davemloft.net
Cc: fweisbec@gmail.com
Cc: perfmon2-devel@lists.sf.net
Cc: eranian@gmail.com
Cc: robert.richter@amd.com
LKML-Reference: <4ca9a5d1.e8e9d80a.3dbb.ffff8f2e@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Wrap the old chip function retrigger() until the migration is complete
and the old chip functions are removed.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20100927121843.025801092@linutronix.de>
Reviewed-by: H. Peter Anvin <hpa@zytor.com>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Wrap the old chip function set_wake() until the migration is complete
and the old chip functions are removed.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20100927121842.927527393@linutronix.de>
Reviewed-by: H. Peter Anvin <hpa@zytor.com>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Wrap the old chip function set_type() until the migration is complete
and the old chip functions are removed.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20100927121842.832261548@linutronix.de>
Reviewed-by: H. Peter Anvin <hpa@zytor.com>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Wrap the old chip function set_affinity() until the migration is
complete and the old chip functions are removed.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20100927121842.732894108@linutronix.de>
Reviewed-by: H. Peter Anvin <hpa@zytor.com>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Wrap the old chip function startup() until the migration is complete and
the old chip functions are removed.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20100927121842.635152961@linutronix.de>
Reviewed-by: H. Peter Anvin <hpa@zytor.com>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Wrap the old chip functions disable() and shutdown() until the
migration is complete and the old chip functions are removed.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20100927121842.532070631@linutronix.de>
Reviewed-by: H. Peter Anvin <hpa@zytor.com>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Wrap the old chip function enable() until the migration is complete and
the old chip functions are removed.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20100927121842.437159182@linutronix.de>
Reviewed-by: H. Peter Anvin <hpa@zytor.com>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Wrap the old chip function eoi() until the migration is complete and
the old chip functions are removed.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20100927121842.339657617@linutronix.de>
Reviewed-by: H. Peter Anvin <hpa@zytor.com>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Wrap the old chip function mask_ack() until the migration is complete
and the old chip functions are removed.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20100927121842.240806983@linutronix.de>
Reviewed-by: H. Peter Anvin <hpa@zytor.com>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
