Commit Graph

5969 Commits

Author SHA1 Message Date
Linus Torvalds
e6dce825fb TTY/Serial patches for 4.9-rc1
Here is the big TTY and Serial patch set for 4.9-rc1.
 
 It also includes some drivers/dma/ changes, as those were needed by some
 serial drivers, and they were all acked by the DMA maintainer.  Also in
 here is the long-suffering ACPI SPCR patchset, which was passed around
 from maintainer to maintainer like a hot-potato.  Seems I was the
 sucker^Wlucky one.  All of those patches have been acked by the various
 subsystem maintainers as well.
 
 All of this has been in linux-next with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iFYEABECABYFAlfyNjEPHGdyZWdAa3JvYWguY29tAAoJEDFH1A3bLfspwIcAn2uN
 qCD8xQJ0Cs61hD1nUzhNygG8AJ94I4zz/fPGpyh/CtJfLQwtUdLhNA==
 =Rken
 -----END PGP SIGNATURE-----

Merge tag 'tty-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty and serial updates from Greg KH:
 "Here is the big tty and serial patch set for 4.9-rc1.

  It also includes some drivers/dma/ changes, as those were needed by
  some serial drivers, and they were all acked by the DMA maintainer.

  Also in here is the long-suffering ACPI SPCR patchset, which was
  passed around from maintainer to maintainer like a hot-potato. Seems I
  was the sucker^Wlucky one. All of those patches have been acked by the
  various subsystem maintainers as well.

  All of this has been in linux-next with no reported issues"

* tag 'tty-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (111 commits)
  Revert "serial: pl011: add console matching function"
  MAINTAINERS: update entry for atmel_serial driver
  serial: pl011: add console matching function
  ARM64: ACPI: enable ACPI_SPCR_TABLE
  ACPI: parse SPCR and enable matching console
  of/serial: move earlycon early_param handling to serial
  Revert "drivers/tty: Explicitly pass current to show_stack"
  tty: amba-pl011: Don't complain on -EPROBE_DEFER when no irq
  nios2: dts: 10m50: Add tx-threshold parameter
  serial: 8250: Set Altera 16550 TX FIFO Threshold
  serial: 8250: of: Load TX FIFO Threshold from DT
  Documentation: dt: serial: Add TX FIFO threshold parameter
  drivers/tty: Explicitly pass current to show_stack
  serial: imx: Fix DCD reading
  serial: stm32: mark symbols static where possible
  serial: xuartps: Add some register initialisation to cdns_early_console_setup()
  serial: xuartps: Removed unwanted checks while reading the error conditions
  serial: xuartps: Rewrite the interrupt handling logic
  serial: stm32: use mapbase instead of membase for DMA
  tty/serial: atmel: fix fractional baud rate computation
  ...
2016-10-03 20:11:49 -07:00
Linus Torvalds
597f03f9d1 Merge branch 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull CPU hotplug updates from Thomas Gleixner:
 "Yet another batch of cpu hotplug core updates and conversions:

   - Provide core infrastructure for multi instance drivers so the
     drivers do not have to keep custom lists.

   - Convert custom lists to the new infrastructure. The block-mq custom
     list conversion comes through the block tree and makes the diffstat
     tip over to more lines removed than added.

   - Handle unbalanced hotplug enable/disable calls more gracefully.

   - Remove the obsolete CPU_STARTING/DYING notifier support.

   - Convert another batch of notifier users.

   The relayfs changes which conflicted with the conversion have been
   shipped to me by Andrew.

   The remaining lot is targeted for 4.10 so that we finally can remove
   the rest of the notifiers"

* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
  cpufreq: Fix up conversion to hotplug state machine
  blk/mq: Reserve hotplug states for block multiqueue
  x86/apic/uv: Convert to hotplug state machine
  s390/mm/pfault: Convert to hotplug state machine
  mips/loongson/smp: Convert to hotplug state machine
  mips/octeon/smp: Convert to hotplug state machine
  fault-injection/cpu: Convert to hotplug state machine
  padata: Convert to hotplug state machine
  cpufreq: Convert to hotplug state machine
  ACPI/processor: Convert to hotplug state machine
  virtio scsi: Convert to hotplug state machine
  oprofile/timer: Convert to hotplug state machine
  block/softirq: Convert to hotplug state machine
  lib/irq_poll: Convert to hotplug state machine
  x86/microcode: Convert to hotplug state machine
  sh/SH-X3 SMP: Convert to hotplug state machine
  ia64/mca: Convert to hotplug state machine
  ARM/OMAP/wakeupgen: Convert to hotplug state machine
  ARM/shmobile: Convert to hotplug state machine
  arm64/FP/SIMD: Convert to hotplug state machine
  ...
2016-10-03 19:43:08 -07:00
Linus Torvalds
999dcbe241 Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
 "The irq departement proudly presents:

   - A rework of the core infrastructure to optimally spread interrupt
     for multiqueue devices. The first version was a bit naive and
     failed to take thread siblings and other details into account.
     Developed in cooperation with Christoph and Keith.

   - Proper delegation of softirqs to ksoftirqd, so if ksoftirqd is
     active then no further softirq processsing on interrupt return
     happens. Otherwise we try to delegate and still run another batch
     of network packets in the irq return path, which then tries to
     delegate to ksoftirqd .....

   - A proper machine parseable sysfs based alternative for
     /proc/interrupts.

   - ACPI support for the GICV3-ITS and ARM interrupt remapping

   - Two new irq chips from the ARM SoC zoo: STM32-EXTI and MVEBU-PIC

   - A new irq chip for the JCore (SuperH)

   - The usual pile of small fixlets in core and irqchip drivers"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits)
  softirq: Let ksoftirqd do its job
  genirq: Make function __irq_do_set_handler() static
  ARM/dts: Add EXTI controller node to stm32f429
  ARM/STM32: Select external interrupts controller
  drivers/irqchip: Add STM32 external interrupts support
  Documentation/dt-bindings: Document STM32 EXTI controller bindings
  irqchip/mips-gic: Use for_each_set_bit to iterate over local IRQs
  pci/msi: Retrieve affinity for a vector
  genirq/affinity: Remove old irq spread infrastructure
  genirq/msi: Switch to new irq spreading infrastructure
  genirq/affinity: Provide smarter irq spreading infrastructure
  genirq/msi: Add cpumask allocation to alloc_msi_entry
  genirq: Expose interrupt information through sysfs
  irqchip/gicv3-its: Use MADT ITS subtable to do PCI/MSI domain initialization
  irqchip/gicv3-its: Factor out PCI-MSI part that might be reused for ACPI
  irqchip/gicv3-its: Probe ITS in the ACPI way
  irqchip/gicv3-its: Refactor ITS DT init code to prepare for ACPI
  irqchip/gicv3-its: Cleanup for ITS domain initialization
  PCI/MSI: Setup MSI domain on a per-device basis using IORT ACPI table
  ACPI: Add new IORT functions to support MSI domain handling
  ...
2016-10-03 19:10:15 -07:00
Linus Torvalds
110a9e42b6 Merge branch 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 apic updates from Ingo Molnar:
 "The main changes are:

   - Persistent CPU/node numbering across CPU hotplug/unplug events.
     This is a pretty involved series of changes that first fetches all
     the information during bootup and then uses it for the various
     hotplug/unplug methods. (Gu Zheng, Dou Liyang)

   - IO-APIC hot-add/remove fixes and enhancements. (Rui Wang)

   - ... various fixes, cleanups and enhancements"

* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
  x86/apic: Fix silent & fatal merge conflict in __generic_processor_info()
  acpi: Fix broken error check in map_processor()
  acpi: Validate processor id when mapping the processor
  acpi: Provide mechanism to validate processors in the ACPI tables
  x86/acpi: Set persistent cpuid <-> nodeid mapping when booting
  x86/acpi: Enable MADT APIs to return disabled apicids
  x86/acpi: Introduce persistent storage for cpuid <-> apicid mapping
  x86/acpi: Enable acpi to register all possible cpus at boot time
  x86/numa: Online memory-less nodes at boot time
  x86/apic: Get rid of apic_version[] array
  x86/apic: Order irq_enter/exit() calls correctly vs. ack_APIC_irq()
  x86/ioapic: Ignore root bridges without a companion ACPI device
  x86/apic: Update comment about disabling processor focus
  x86/smpboot: Check APIC ID before setting up default routing
  x86/ioapic: Fix IOAPIC failing to request resource
  x86/ioapic: Fix lost IOAPIC resource after hot-removal and hotadd
  x86/ioapic: Fix setup_res() failing to get resource
  x86/ioapic: Support hot-removal of IOAPICs present during boot
  x86/ioapic: Change prototype of acpi_ioapic_add()
  x86/apic, ACPI: Fix incorrect assignment when handling apic/x2apic entries
  ...
2016-10-03 15:36:06 -07:00
Linus Torvalds
72d39926f0 ACPI material for v4.9-rc1
- Update of the ACPICA code in the kernel to upstream revision 20160831 with
    the following major changes:
    * New mechanism for GPE masking.
    * Fixes for issues related to the LoadTable operator and table loading.
    * Fixes for issues related to so-called module-level code (MLC), that is
      AML that doesn't belong to any methods.
    * Change of the return value of the _OSI method to reflect the Windows
      behavior.
    * GAS (Generic Address Structure) support fix related to 32-bit FADT
      addresses.
    * Elimination of unnecessary FADT version 2 support.
    * ACPI tools fixes and cleanups.
    From Bob Moore, Lv Zheng, and Jung-uk Kim.
 
  - ACPI sysfs interface updates to fix GPE handling (on top of the new GPE
    masking mechanism in ACPICA) and issues related to table loading (Lv Zheng).
 
  - New watchdog driver based on the ACPI WDAT (ACPI Watchdog Action Table),
    needed on some platforms to replace the iTCO watchdog that doesn't work there
    and related updates of the intel_pmc_ipc, i2c/i801 and MFD/lcp_ich drivers
    (Mika Westerberg).
 
  - Driver core fix to prevent it from leaking secondary fwnode objects during
    device removal (Lukas Wunner).
 
  - New definitions of built-in properties for UART in ACPI-based x86 SoC drivers
    and a 8250_dw driver quirk for the APM X-Gene SoC (Heikki Krogerus).
 
  - New device ID for the Vulcan SPI controller and constification of local
    strucures in the AMD SoC (APD) ACPI driver (Kamlakant Patel, Julia Lawall).
 
  - Fix for a bug causing the allocation of PCI resorces to fail if
    ACPI-enumerated child platform devices are registered below the PCI
    devices in question (Mika Westerberg).
 
  - Change of the default polarity for PCI legacy IRQs to high on systems
    booting wth ACPI on platforms with a GIC interrupt controller model
    fixing the discrepancy between the specification and HW behavior (Lorenzo
    Pieralisi).
 
  - Fixes for the handling of system suspend/resume in the ACPI EC driver and
    update of that driver to make it cope with the cases when the EC device
    defined in the ECDT has to be used throughout the entire system life cycle
    (Lv Zheng).
 
  - Update of the ACPI CPPC library to allow it to batch requests sent over the
    PCC channel (to reduce overhead), to support the fixed functional hardware
    (FFH) CPPC registers access type, to notify the mailbox framework about TX
    completions when the interrupt flag is set for the PCC mailbox, and to
    support HW-Reduced Communication Subspace type 2 (Ashwin Chaugule, Prashanth
    Prakash, Srinivas Pandruvada, Hoan Tran).
 
  - ACPI button driver fix and documentation update related to the handling of
    laptop lids (Lv Zheng).
 
  - ACPI battery driver initialization fix (Carlos Garnacho).
 
  - ACPI GPIO enumeration documentation update (Mika Westerberg).
 
  - Assorted updates of the core ACPI bus type code (Lukas Wunner, Lv Zheng).
 
  - Assorted cleanups of the ACPI table parsing code and the x86-specific ACPI
    code (Al Stone).
 
  - Fixes for assorted ACPI-related issues found in linux-next (Wei Yongjun).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJX8Y5+AAoJEILEb/54YlRx73oP/RiAi86NKjOj+GfYceVe37jn
 6lSqoMugjgTQHRYvYiQCjJ/BR0GzQZqUkz9TAu1Op14+rhTH3OhSfPizzJWCpVfA
 G9l9ZRQNnsKNs14bbYmWtmWduh46dFLVFJqo+M/0H3ZMFZu6Adcb+1SBtXHUoQ6L
 z69ngFxTu3yRvqS4cmm5h7SOx5W2uZZl8zViJW8jgyGhUBStG87gzR6wsYBldGCk
 XFxcaGWBXRccWGAQLSwfs0psQccEooCqbpsDqaUdrK/mI0rsQr88f25ZxEE7Zw7H
 bv3py1cgJBZRq36L7eBGQXjIE7YQey6qG2lug2zsUJWe+vzy2vHjHVJHuBXKKgv3
 txOA6QZx63UgEyN3zFT7K5ek6uOnkKdeE+s+Laj+K/x4V2R6gbtgO011EVcXy+bI
 NvqsO76tfPHpwrn5s1VVc5lcEBEPHKHb+WulHrqhSSU4ivk0gtJDeSI+c8xta6YT
 XwSry5tozDLkG1uEZqkyY1XTlOUAHO8E6YcrlOv2z1+mG7L8OH/vCp1apzgexsZA
 1683AH5cwKc3KaP+4QdKGdxY2BDxb7OTVh3cGy4kAYb6tqQ/vj7vlRiJvtaMBtFw
 xJn3buuagwJzKtgebpA565opvyFAfUX/RNFlTP63aXAefSAgq6KLq70vKFxkIZto
 H1LpUbmiEbuBml8CBGb1
 =xDOQ
 -----END PGP SIGNATURE-----

Merge tag 'acpi-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI updates from Rafael Wysocki:
 "First off, the ACPICA code in the kernel is updated to upstream
  revision 20160831 that brings in a few bug fixes and cleanups. In
  particular, it is possible to mask GPEs now (and the sysfs interface
  for GPE control is fixed on top of that), problems related to the
  table loading mechanism are fixed and all code related to FADT version
  2 (which has never been part of the ACPI specification) is dropped.

  On the new features front, there is a new watchdog driver based on the
  ACPI WDAT (ACPI Watchdog Action Table), needed on some platforms to
  replace the iTCO watchdog that doesn't work there, and some UART
  devices get new definitions of built-in properties (to be accessed via
  the generic device properties API).

  Also, included is a fix for an ACPI-related PCI resorces allocation
  issue and a few problems in the EC driver and in the button and
  battery drivers are fixed.

  In addition to that, the ACPI CPPC library is updated to make batching
  of requests sent over the PCC channel possible (which reduces the PCC
  usage overhead substantially in some cases) and to support functional
  fixed hardware (FFH) type of CPPC registers access (which will allow
  CPPC to be used on x86 too in the future).

  As usual, there are some assorted fixes and cleanups too.

  Specifics:

   - Update of the ACPICA code in the kernel to upstream revision
     20160831 with the following major changes:

      * New mechanism for GPE masking.
      * Fixes for issues related to the LoadTable operator and table
        loading.
      * Fixes for issues related to so-called module-level code (MLC),
        that is AML that doesn't belong to any methods.
      * Change of the return value of the _OSI method to reflect the
        Windows behavior.
      * GAS (Generic Address Structure) support fix related to 32-bit
        FADT addresses.
      * Elimination of unnecessary FADT version 2 support.
      * ACPI tools fixes and cleanups.

     From Bob Moore, Lv Zheng, and Jung-uk Kim.

   - ACPI sysfs interface updates to fix GPE handling (on top of the new
     GPE masking mechanism in ACPICA) and issues related to table
     loading (Lv Zheng).

   - New watchdog driver based on the ACPI WDAT (ACPI Watchdog Action
     Table), needed on some platforms to replace the iTCO watchdog that
     doesn't work there and related updates of the intel_pmc_ipc,
     i2c/i801 and MFD/lcp_ich drivers (Mika Westerberg).

   - Driver core fix to prevent it from leaking secondary fwnode objects
     during device removal (Lukas Wunner).

   - New definitions of built-in properties for UART in ACPI-based x86
     SoC drivers and a 8250_dw driver quirk for the APM X-Gene SoC
     (Heikki Krogerus).

   - New device ID for the Vulcan SPI controller and constification of
     local strucures in the AMD SoC (APD) ACPI driver (Kamlakant Patel,
     Julia Lawall).

   - Fix for a bug causing the allocation of PCI resorces to fail if
     ACPI-enumerated child platform devices are registered below the PCI
     devices in question (Mika Westerberg).

   - Change of the default polarity for PCI legacy IRQs to high on
     systems booting wth ACPI on platforms with a GIC interrupt
     controller model fixing the discrepancy between the specification
     and HW behavior (Lorenzo Pieralisi).

   - Fixes for the handling of system suspend/resume in the ACPI EC
     driver and update of that driver to make it cope with the cases
     when the EC device defined in the ECDT has to be used throughout
     the entire system life cycle (Lv Zheng).

   - Update of the ACPI CPPC library to allow it to batch requests sent
     over the PCC channel (to reduce overhead), to support the fixed
     functional hardware (FFH) CPPC registers access type, to notify the
     mailbox framework about TX completions when the interrupt flag is
     set for the PCC mailbox, and to support HW-Reduced Communication
     Subspace type 2 (Ashwin Chaugule, Prashanth Prakash, Srinivas
     Pandruvada, Hoan Tran).

   - ACPI button driver fix and documentation update related to the
     handling of laptop lids (Lv Zheng).

   - ACPI battery driver initialization fix (Carlos Garnacho).

   - ACPI GPIO enumeration documentation update (Mika Westerberg).

   - Assorted updates of the core ACPI bus type code (Lukas Wunner, Lv
     Zheng).

   - Assorted cleanups of the ACPI table parsing code and the
     x86-specific ACPI code (Al Stone).

   - Fixes for assorted ACPI-related issues found in linux-next (Wei
     Yongjun)"

* tag 'acpi-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (98 commits)
  ACPI / documentation: Use recommended name in GPIO property names
  watchdog: wdat_wdt: Fix warning for using 0 as NULL
  watchdog: wdat_wdt: fix return value check in wdat_wdt_probe()
  platform/x86: intel_pmc_ipc: Do not create iTCO watchdog when WDAT table exists
  i2c: i801: Do not create iTCO watchdog when WDAT table exists
  mfd: lpc_ich: Do not create iTCO watchdog when WDAT table exists
  ACPI / bus: Adjust ACPI subsystem initialization for new table loading mode
  ACPICA: Parser: Fix a regression in LoadTable support
  ACPICA: Tables: Fix "UNLOAD" code path lock issues
  ACPI / watchdog: Add support for WDAT hardware watchdog
  ACPI / platform: Pay attention to parent device's resources
  PCI: Add pci_find_resource()
  ACPI / CPPC: Support PCC with interrupt flag
  ACPI / sysfs: Update sysfs signature handling code
  ACPI / sysfs: Fix an issue for LoadTable opcode
  ACPICA: Tables: Fix a regression in acpi_tb_find_table()
  ACPI / tables: Remove duplicated include from tables.c
  ACPI / APD: constify local structures
  x86: ACPI: make variable names clearer in acpi_parse_madt_lapic_entries()
  x86: ACPI: remove extraneous white space after semicolon
  ...
2016-10-03 10:11:58 -07:00
Rafael J. Wysocki
8c4b172123 Merge branches 'acpi-button', 'acpi-battery' and 'acpi-doc'
* acpi-button:
  ACPI / button: Add document for ACPI control method lid device restrictions
  ACPI / button: Fix an issue in button.lid_init_state=ignore mode

* acpi-battery:
  ACPI / battery: Add sysfs representation after checking _BST

* acpi-doc:
  ACPI / documentation: Use recommended name in GPIO property names
2016-10-02 01:40:20 +02:00
Rafael J. Wysocki
0137a337d7 Merge branches 'acpi-wdat' and 'acpi-ec'
* acpi-wdat:
  watchdog: wdat_wdt: Fix warning for using 0 as NULL
  watchdog: wdat_wdt: fix return value check in wdat_wdt_probe()
  platform/x86: intel_pmc_ipc: Do not create iTCO watchdog when WDAT table exists
  i2c: i801: Do not create iTCO watchdog when WDAT table exists
  mfd: lpc_ich: Do not create iTCO watchdog when WDAT table exists
  ACPI / watchdog: Add support for WDAT hardware watchdog

* acpi-ec:
  ACPI / EC: Fix issues related to boot_ec
  ACPI / EC: Fix a gap that ECDT EC cannot handle EC events
  ACPI / EC: Fix a memory leakage issue in acpi_ec_add()
  ACPI / EC: Cleanup first_ec/boot_ec code
  ACPI / EC: Enable event freeze mode to improve event handling for suspend process
  ACPI / EC: Add PM operations to improve event handling for suspend process
  ACPI / EC: Add PM operations to improve event handling for resume process
  ACPI / EC: Fix an issue that SCI_EVT cannot be detected after event is enabled
  ACPI / EC: Add EC_FLAGS_QUERY_ENABLED to reveal a hidden logic
  ACPI / EC: Add PM operations for suspend/resume noirq stage
2016-10-02 01:40:07 +02:00
Rafael J. Wysocki
0d573c6a01 Merge branches 'acpi-x86', 'acpi-cppc' and 'acpi-soc'
* acpi-x86:
  x86: ACPI: make variable names clearer in acpi_parse_madt_lapic_entries()
  x86: ACPI: remove extraneous white space after semicolon

* acpi-cppc:
  ACPI / CPPC: Support PCC with interrupt flag
  ACPI / CPPC: Add prefix cppc to cpudata structure name
  ACPI / CPPC: Add support for functional fixed hardware address
  ACPI / CPPC: Don't return on CPPC probe failure
  ACPI / CPPC: Allow build with ACPI_CPU_FREQ_PSS config
  ACPI / CPPC: check for error bit in PCC status field
  ACPI / CPPC: move all PCC related information into pcc_data
  ACPI / CPPC: add sysfs support to compute delivered performance
  ACPI / CPPC: set a non-zero value for transition_latency
  ACPI / CPPC: support for batching CPPC requests
  ACPI / CPPC: acquire pcc_lock only while accessing PCC subspace
  ACPI / CPPC: restructure read/writes for efficient sys mapped reg ops
  mailbox: pcc: Support HW-Reduced Communication Subspace type 2

* acpi-soc:
  ACPI / APD: constify local structures
  ACPI / APD: Add device HID for Vulcan SPI controller
2016-10-02 01:39:09 +02:00
Rafael J. Wysocki
4ec9e2890a Merge branch 'acpi-bus'
* acpi-bus:
  ACPI / bus: Adjust ACPI subsystem initialization for new table loading mode
  ACPI / bus: Make acpi_get_first_physical_node() public
2016-10-02 01:38:44 +02:00
Rafael J. Wysocki
84a78c724b Merge branches 'acpi-sysfs', 'acpi-pci' and 'acpi-tables'
* acpi-sysfs:
  ACPI / sysfs: Update sysfs signature handling code
  ACPI / sysfs: Fix an issue for LoadTable opcode
  ACPI / sysfs: Use new GPE masking mechanism in GPE interface

* acpi-pci:
  ACPI / platform: Pay attention to parent device's resources
  PCI: Add pci_find_resource()
  ACPI / PCI: fix GIC irq model default PCI IRQ polarity

* acpi-tables:
  ACPI / tables: Remove duplicated include from tables.c
  ACPI / tables: do not report the number of entries ignored by acpi_parse_entries()
  ACPI / tables: fix acpi_parse_entries_array() so it traverses all subtables
  ACPI / tables: fix incorrect counts returned by acpi_parse_entries_array()
2016-10-02 01:38:34 +02:00
Rafael J. Wysocki
9274139f4e Merge branch 'acpica'
* acpica: (45 commits)
  ACPICA: Parser: Fix a regression in LoadTable support
  ACPICA: Tables: Fix "UNLOAD" code path lock issues
  ACPICA: Tables: Fix a regression in acpi_tb_find_table()
  ACPICA: Update version to 20160831
  ACPICA: Tables: Tune table mutex to be a leaf lock
  ACPICA: Dispatcher: Fix a mutex issue for method auto serialization
  ACPICA: Namespace: Fix dynamic table loading issues
  ACPICA: Namespace: Add acpi_ns_get_node_unlocked()
  ACPICA: Interpreter: Fix MLC issues by switching to new term_list grammar for table loading
  ACPICA: Update return value for intenal _OSI method
  ACPICA: Tables: Override all 64-bit GAS fields when acpi_gbl_use32_bit_fadt_addresses is TRUE
  ACPICA: Tables: Add new table events indicating table installation/uninstallation
  ACPICA: Tables: Remove wrong table event macros
  ACPICA: Tables: Remove acpi_tb_install_fixed_table()
  ACPICA: Add a couple of casts to uthex.c
  ACPICA: Cleanup for all string-to-integer conversions
  ACPICA: Debugger: Add subcommand for predefined name execution
  ACPICA: Update version to 20160729
  ACPICA: OSL: Fix a regression that old GCC requires a workaround for strchr()
  ACPICA: OSL: Cleanup the inclusion order of the compiler-specific headers
  ...
2016-10-02 01:37:32 +02:00
Rafael J. Wysocki
52ff5adc1f Merge branch 'device-properties'
* device-properties:
  serial: 8250_dw: Add quirk for APM X-Gene SoC
  ACPI / LPSS: Provide build-in properties of the UART
  ACPI / APD: Provide build-in properties of the UART
  driver core: Don't leak secondary fwnode on device removal
2016-10-02 01:35:42 +02:00
Aleksey Makarov
ad1696f6f0 ACPI: parse SPCR and enable matching console
'ARM Server Base Boot Requiremets' [1] mentions SPCR (Serial Port
Console Redirection Table) [2] as a mandatory ACPI table that
specifies the configuration of serial console.

Defer initialization of DT earlycon until ACPI/DT decision is made.

Parse the ACPI SPCR table, setup earlycon if required,
enable specified console.

Thanks to Peter Hurley for explaining how this should work.

[1] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.den0044a/index.html
[2] https://msdn.microsoft.com/en-us/library/windows/hardware/dn639132(v=vs.85).aspx

Signed-off-by: Aleksey Makarov <aleksey.makarov@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Tested-by: Christopher Covington <cov@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-28 17:46:46 +02:00
Thomas Gleixner
1e1b37273c Merge branch 'x86/urgent' into x86/apic
Bring in the upstream modifications so we can fixup the silent merge
conflict which is introduced by this merge.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-26 15:47:03 -04:00
Lv Zheng
1ef356681e ACPI / bus: Adjust ACPI subsystem initialization for new table loading mode
This patch enables the following initialization order for the
new table loading mode (which is enabled by setting
acpi_gbl_parse_table_as_term_list to TRUE):

  1. Install default region handlers (SystemMemory, SystemIo, PciConfig,
     EmbeddedControl via ECDT) without evaluating _REG;

  2. Load the table and execute the module level AML opcodes instantly.

Signed-off-by: Lv Zheng <lv.zheng@intel.com>
[ rjw: Subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-26 14:46:53 +02:00
Rafael J. Wysocki
f42106fe65 Merge branch 'acpica' into acpi-bus 2016-09-26 14:44:12 +02:00
Lv Zheng
7a0b71dc80 ACPICA: Parser: Fix a regression in LoadTable support
ACPICA commit a78506e0ce8ab1d20db2a055d99cf9143e89eb29

LoadTable allows an alternative RootPathString than the default "\", while
the new table execution support fails to keep this logic.

This regression can be detected by ASLTS - TLT0.tst4, this patch fixes this
regression.

Linux upstream is not affected by this regression as we haven't enabled the
new table execution support there. BZ 1326, Lv Zheng.

Link: https://github.com/acpica/acpica/commit/a78506e0
Link: https://bugs.acpica.org/show_bug.cgi?id=1326
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-24 02:16:53 +02:00
Lv Zheng
9febcdc071 ACPICA: Tables: Fix "UNLOAD" code path lock issues
ACPICA commit 39227380f5b99c51b897a3ffedd88508aa26789b

The previous lock fixes didn't cover "Unload" opcode and table unload APIs,
this patch fixes lock issues in the "Unload" code path. BZ 1325, Lv Zheng.

Link: https://github.com/acpica/acpica/commit/39227380
Link: https://bugs.acpica.org/show_bug.cgi?id=1325
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-24 02:16:52 +02:00
Mika Westerberg
058dfc7670 ACPI / watchdog: Add support for WDAT hardware watchdog
Starting from Intel Skylake the iTCO watchdog timer registers were moved to
reside in the same register space with SMBus host controller.  Not all
needed registers are available though and we need to unhide P2SB (Primary
to Sideband) device briefly to be able to read status of required NO_REBOOT
bit. The i2c-i801.c SMBus driver used to handle this and creation of the
iTCO watchdog platform device.

Windows, on the other hand, does not use the iTCO watchdog hardware
directly even if it is available. Instead it relies on ACPI Watchdog Action
Table (WDAT) table to describe the watchdog hardware to the OS. This table
contains necessary information about the the hardware and also set of
actions which are executed by a driver as needed.

This patch implements a new watchdog driver that takes advantage of the
ACPI WDAT table. We split the functionality into two parts: first part
enumerates the WDAT table and if found, populates resources and creates
platform device for the actual driver. The second part is the driver
itself.

The reason for the split is that this way we can make the driver itself to
be a module and loaded automatically if the WDAT table is found. Otherwise
the module is not loaded.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-24 02:10:04 +02:00
Thomas Gleixner
c183a603e8 acpi: Fix broken error check in map_processor()
map_processor() checks the cpuid value returned by acpi_map_cpuid() for -1
but acpi_map_cpuid() returns -EINVAL in case of error.

As a consequence the error is ignored and the following access into percpu
data with that negative cpuid results in a boot crash.

This happens always when NR_CPUS/nr_cpu_ids is smaller than the number of
processors listed in the ACPI tables.

Use a proper error check for id < 0 so the function returns instead of
trying to map CPU#(-EINVAL).

Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Dou Liyang <douly.fnst@cn.fujitsu.com>
Cc: Gu Zheng <guz.fnst@cn.fujitsu.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Cc: akpm@linux-foundation.org
Cc: chen.tang@easystack.cn
Cc: cl@linux.com
Cc: gongzhaogang@inspur.com
Cc: isimatu.yasuaki@jp.fujitsu.com
Cc: izumi.taku@jp.fujitsu.com
Cc: kamezawa.hiroyu@jp.fujitsu.com
Cc: len.brown@intel.com
Cc: lenb@kernel.org
Cc: linux-acpi@vger.kernel.org
Cc: linux-mm@kvack.org
Cc: mika.j.penttila@gmail.com
Cc: rafael@kernel.org
Cc: rjw@rjwysocki.net
Cc: tj@kernel.org
Cc: yasu.isimatu@gmail.com
Fixes: dc6db24d24 ("x86/acpi: Set persistent cpuid <-> nodeid mapping when booting")
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1609231705570.5640@nanos
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-23 18:04:56 +02:00
Dou Liyang
fd74da217d acpi: Validate processor id when mapping the processor
When we want to identify whether the proc_id is unreasonable or not, we
can call the "acpi_processor_validate_proc_id" function. It will search
in the duplicate IDs. If we find the proc_id in the IDs, we return true
to the call function. Conversely, the false represents available.

When we establish all possible cpuid <-> nodeid mapping to handle the
cpu hotplugs, we will use the proc_id from ACPI table.

We do validation when we get the proc_id. If the result is true, we
will stop the mapping.

[ tglx: Mark the new function __init ]

Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: mika.j.penttila@gmail.com
Cc: len.brown@intel.com
Cc: rafael@kernel.org
Cc: rjw@rjwysocki.net
Cc: yasu.isimatu@gmail.com
Cc: linux-mm@kvack.org
Cc: linux-acpi@vger.kernel.org
Cc: isimatu.yasuaki@jp.fujitsu.com
Cc: gongzhaogang@inspur.com
Cc: tj@kernel.org
Cc: izumi.taku@jp.fujitsu.com
Cc: cl@linux.com
Cc: chen.tang@easystack.cn
Cc: akpm@linux-foundation.org
Cc: kamezawa.hiroyu@jp.fujitsu.com
Cc: lenb@kernel.org
Link: http://lkml.kernel.org/r/1472114120-3281-8-git-send-email-douly.fnst@cn.fujitsu.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-21 21:18:40 +02:00
Dou Liyang
8e089eaa19 acpi: Provide mechanism to validate processors in the ACPI tables
[Problem]

When we set cpuid <-> nodeid mapping to be persistent, it will use the DSDT
As we know, the ACPI tables are just like user's input in that respect, and
we don't crash if user's input is unreasonable.

Such as, the mapping of the proc_id and pxm in some machine's ACPI table is
like this:

proc_id   |    pxm
--------------------
0       <->     0
1       <->     0
2       <->     1
3       <->     1
89      <->     0
89      <->     0
89      <->     0
89      <->     1
89      <->     1
89      <->     2
89      <->     3
.....

We can't be sure which one is correct to the proc_id 89. We may map a wrong
node to a cpu. When pages are allocated, this may cause a kernal panic.

So, we should provide mechanisms to validate the ACPI tables, just like we
do validation to check user's input in web project.

The mechanism is that the processor objects which have the duplicate IDs
are not valid.

[Solution]

We add a validation function, like this:

foreach Processor in DSDT
	proc_id = get_ACPI_Processor_number(Processor)
	if (proc_id exists )
		mark both of them as being unreasonable;

The function will record the unique or duplicate processor IDs.

The duplicate processor IDs such as 89 are regarded as the unreasonable IDs
which mean that the processor objects in question are not valid.

[ tglx: Add __init[data] annotations ]

Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: mika.j.penttila@gmail.com
Cc: len.brown@intel.com
Cc: rafael@kernel.org
Cc: rjw@rjwysocki.net
Cc: yasu.isimatu@gmail.com
Cc: linux-mm@kvack.org
Cc: linux-acpi@vger.kernel.org
Cc: isimatu.yasuaki@jp.fujitsu.com
Cc: gongzhaogang@inspur.com
Cc: tj@kernel.org
Cc: izumi.taku@jp.fujitsu.com
Cc: cl@linux.com
Cc: chen.tang@easystack.cn
Cc: akpm@linux-foundation.org
Cc: kamezawa.hiroyu@jp.fujitsu.com
Cc: lenb@kernel.org
Link: http://lkml.kernel.org/r/1472114120-3281-7-git-send-email-douly.fnst@cn.fujitsu.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-21 21:18:39 +02:00
Gu Zheng
dc6db24d24 x86/acpi: Set persistent cpuid <-> nodeid mapping when booting
The whole patch-set aims at making cpuid <-> nodeid mapping persistent. So that,
when node online/offline happens, cache based on cpuid <-> nodeid mapping such as
wq_numa_possible_cpumask will not cause any problem.
It contains 4 steps:
1. Enable apic registeration flow to handle both enabled and disabled cpus.
2. Introduce a new array storing all possible cpuid <-> apicid mapping.
3. Enable _MAT and MADT relative apis to return non-present or disabled cpus' apicid.
4. Establish all possible cpuid <-> nodeid mapping.

This patch finishes step 4.

This patch set the persistent cpuid <-> nodeid mapping for all enabled/disabled
processors at boot time via an additional acpi namespace walk for processors.

[ tglx: Remove the unneeded exports ]

Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: mika.j.penttila@gmail.com
Cc: len.brown@intel.com
Cc: rafael@kernel.org
Cc: rjw@rjwysocki.net
Cc: yasu.isimatu@gmail.com
Cc: linux-mm@kvack.org
Cc: linux-acpi@vger.kernel.org
Cc: isimatu.yasuaki@jp.fujitsu.com
Cc: gongzhaogang@inspur.com
Cc: tj@kernel.org
Cc: izumi.taku@jp.fujitsu.com
Cc: cl@linux.com
Cc: chen.tang@easystack.cn
Cc: akpm@linux-foundation.org
Cc: kamezawa.hiroyu@jp.fujitsu.com
Cc: lenb@kernel.org
Link: http://lkml.kernel.org/r/1472114120-3281-6-git-send-email-douly.fnst@cn.fujitsu.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-21 21:18:39 +02:00
Gu Zheng
8ad893faf2 x86/acpi: Enable MADT APIs to return disabled apicids
The whole patch-set aims at making cpuid <-> nodeid mapping persistent. So that,
when node online/offline happens, cache based on cpuid <-> nodeid mapping such as
wq_numa_possible_cpumask will not cause any problem.
It contains 4 steps:
1. Enable apic registeration flow to handle both enabled and disabled cpus.
2. Introduce a new array storing all possible cpuid <-> apicid mapping.
3. Enable _MAT and MADT relative apis to return non-present or disabled cpus' apicid.
4. Establish all possible cpuid <-> nodeid mapping.

This patch finishes step 3.

There are four mappings in the kernel:
1. nodeid (logical node id)   <->   pxm        (persistent)
2. apicid (physical cpu id)   <->   nodeid     (persistent)
3. cpuid (logical cpu id)     <->   apicid     (not persistent, now persistent by step 2)
4. cpuid (logical cpu id)     <->   nodeid     (not persistent)

So, in order to setup persistent cpuid <-> nodeid mapping for all possible CPUs,
we should:
1. Setup cpuid <-> apicid mapping for all possible CPUs, which has been done in step 1, 2.
2. Setup cpuid <-> nodeid mapping for all possible CPUs. But before that, we should
   obtain all apicids from MADT.

All processors' apicids can be obtained by _MAT method or from MADT in ACPI.
The current code ignores disabled processors and returns -ENODEV.

After this patch, a new parameter will be added to MADT APIs so that caller
is able to control if disabled processors are ignored.

Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: mika.j.penttila@gmail.com
Cc: len.brown@intel.com
Cc: rafael@kernel.org
Cc: rjw@rjwysocki.net
Cc: yasu.isimatu@gmail.com
Cc: linux-mm@kvack.org
Cc: linux-acpi@vger.kernel.org
Cc: isimatu.yasuaki@jp.fujitsu.com
Cc: gongzhaogang@inspur.com
Cc: tj@kernel.org
Cc: izumi.taku@jp.fujitsu.com
Cc: cl@linux.com
Cc: chen.tang@easystack.cn
Cc: akpm@linux-foundation.org
Cc: kamezawa.hiroyu@jp.fujitsu.com
Cc: lenb@kernel.org
Link: http://lkml.kernel.org/r/1472114120-3281-5-git-send-email-douly.fnst@cn.fujitsu.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-21 21:18:39 +02:00
Dan Williams
11294d63ac nfit: fail DSMs that return non-zero status by default
For the DSMs where the kernel knows the format of the output buffer and
originates those DSMs from within the kernel, return -EIO for any
non-zero status.  If the BIOS is indicating a status that we do not know
how to handle, fail the DSM.

Cc: <stable@vger.kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-09-21 09:35:19 -07:00
Sebastian Andrzej Siewior
64f3bf2f85 ACPI/processor: Convert to hotplug state machine
Install the callbacks via the state machine.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-acpi@vger.kernel.org
Cc: rt@linutronix.de
Cc: Len Brown <lenb@kernel.org>
Link: http://lkml.kernel.org/r/20160906170457.32393-12-bigeasy@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-19 21:44:29 +02:00
Mika Westerberg
a252d881c5 ACPI / platform: Pay attention to parent device's resources
Given following simplified device hierarchy:

  // PCI device having BAR0 (RMEM) split between 4 GPIO devices.
  Device (P2S)
  {
      Name (_ADR, 0x000d0000)

      Device (GPO0)
      {
          Name (_HID, "INT3452")
          Name (_UID, 1)
          Name (_CRS, ResourceTemplate () {
              Memory32Fixed (ReadWrite, 0, 0x4000, RMEM + 0x0000)
          })
      }

      Device (GPO1)
      {
          Name (_HID, "INT3452")
          Name (_UID, 2)
          Name (_CRS, ResourceTemplate () {
              Memory32Fixed (ReadWrite, 0, 0x4000, RMEM + 0x4000)
          })
      }

      Device (GPO2)
      {
          Name (_HID, "INT3452")
          Name (_UID, 3)
          Name (_CRS, ResourceTemplate () {
              Memory32Fixed (ReadWrite, 0, 0x4000, RMEM + 0x8000)
          })
      }

      Device (GPO3)
      {
          Name (_HID, "INT3452")
          Name (_UID, 4)
          Name (_CRS, ResourceTemplate () {
              Memory32Fixed (ReadWrite, 0, 0x4000, RMEM + 0xc000)
          })
      }
  }

The current ACPI platform enumeration code allocates resources from the
global MMIO resource pool (/proc/iomem) for all the four GPIO devices.
After this PCI core calls pcibios_resource_survey() to allocate resources
for all PCI devices including the parent device for these GPIO devices
(P2S). Since that resource range has already been reserved the allocation
fails.

The reason for this is that we never bother with parent device's resources
when ACPI platform devices are created.

Fix this by checking whether there is a parent device and in that case make
sure we assign correct parent resource to the resources for the child ACPI
platform device. Currently we only deal with parent devices if they are PCI
devices but we may expand this later to cover other bus types as well.

Reported-by: Aaron Durbin <adurbin@google.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-17 01:17:17 +02:00
Hoan Tran
b59c4b3dcd ACPI / CPPC: Support PCC with interrupt flag
For PCC mailbox with interrupt flag, CPPC should call mbox_chan_txdone()
function to notify the mailbox framework about TX completion.

Signed-off-by: Hoan Tran <hotran@apm.com>
Reviewed-by: Prashanth Prakash <pprakash@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-17 01:14:24 +02:00
Lv Zheng
914c619409 ACPI / sysfs: Update sysfs signature handling code
This patch cleans up sysfs table signature handling code:

 1. Convert the signature handling code to use the ACPICA APIs to
    benefit from the future improvements of the APIs.

 2. Add 'filename' attribute in order to handle both BE/LE name tags.

 3. Add instance check in order to avoid the possible buffer overflow
    related to the table file name.

Signed-off-by: Lv Zheng <lv.zheng@intel.com>
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-17 01:12:34 +02:00
Lv Zheng
307ecb0aa3 ACPI / sysfs: Fix an issue for LoadTable opcode
OEM tables can be installed via RSDT/XSDT, in this case, they have already
been created under /sys/firmware/acpi/tables.

For this kind of tables, normally LoadTable opcode will be executed to load
them. If LoadTable opcode is executed after acpi_sysfs_init(),
acpi_sysfs_table_handler() will be invoked, thus a redundant table file
will be created under /sys/firmware/acpi/tables/dynamic. Then running
"acpidump" on such platform results in an error, complaining blank empty
table (see Link 1 below).

The bug can be reproduced by customizing an OEM1 table, allowing it to be
overridden via 'table_sigs' (drivers/acpi/tables.c), adding the following
code to the customized DSDT to load it:

  Name (OEMH, Zero)
  Name (OEMF, One)
  If (LEqual (OEMF, One)) {
      Store (LoadTable ("OEM1", "Intel", "Test"), OEMH)
      Store (Zero, OEMF)
  }

In order to make sure that the OEM1 table is installed after
acpi_sysfs_init(), acpi_sysfs_init() can be moved before invoking
acpi_load_tables(). Then the following command execution result can be
seen:
 # acpidump > acpidump.txt
 Could not read table header: /sysfs/firmware/acpi/tables/dynamic/OEM12
 Could not get ACPI table at index 17, AE_BAD_HEADER

Link: https://bugzilla.kernel.org/show_bug.cgi?id=150841 # [1]
Link: https://github.com/acpica/acpica/commit/ed6a5fbc
Reported-by: Jason Voelz <jason.voelz@intel.com>
Reported-by: Francisco Leoner <francisco.j.lenoer.soto@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-17 01:10:43 +02:00
Rafael J. Wysocki
2375020559 Merge branch 'acpica' into acpi-sysfs 2016-09-17 01:08:27 +02:00
Lv Zheng
86ec64bc38 ACPICA: Tables: Fix a regression in acpi_tb_find_table()
In the following commit, the return value of acpi_tb_find_table() is
incorrect:

commit ac0f06ebb8
Author: Lv Zheng <lv.zheng@intel.com>
Date:   Wed Sep 7 14:07:24 2016 +0800

    ACPICA: Tables: Tune table mutex to be a leaf lock

    ACPICA commit f564d57c6501b97a2871f0b4c048e79910f71783

This causes LoadTable opcode to fail. Fix this mistake.

Signed-off-by: Lv Zheng <lv.zheng@intel.com>
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-17 01:07:57 +02:00
Wei Yongjun
ffcbed8418 ACPI / tables: Remove duplicated include from tables.c
Remove duplicated include.

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-17 01:03:32 +02:00
Julia Lawall
a217726a7d ACPI / APD: constify local structures
For structure types defined in the same file or local header files, find
top-level static structure declarations that have the following
properties:
1. Never reassigned.
2. Address never taken
3. Not passed to a top-level macro call
4. No pointer or array-typed field passed to a function or stored in a
variable.
Declare structures having all of these properties as const.

Done using Coccinelle.
Based on a suggestion by Joe Perches <joe@perches.com>.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-13 03:13:30 +02:00
Rafael J. Wysocki
f75ee9a881 Merge branch 'device-properties' into acpi-soc 2016-09-13 03:12:20 +02:00
Tomasz Nowicki
4bf2efd26d ACPI: Add new IORT functions to support MSI domain handling
For ITS, MSI functionality consists on building domain stack and
during that process we need to reference to domain stack components
e.g. before we create new DOMAIN_BUS_PCI_MSI domain we need to specify
its DOMAIN_BUS_NEXUS parent domain. In order to manage that process
properly, maintain list which elements contain domain token
(unique for MSI domain stack) and ITS ID: iort_register_domain_token()
and iort_deregister_domain_token(). Then retrieve domain token
any time later with ITS ID being key off: iort_find_domain_token().
With domain token and domain type we are able to find corresponding
IRQ domain.

Since IORT is prepared to describe MSI domain on a per-device basis,
use existing IORT helpers and implement two calls:
1. iort_msi_map_rid() to map MSI RID for a device
2. iort_get_device_domain() to find domain token for a device

Signed-off-by: Tomasz Nowicki <tn@semihalf.com>
Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net>
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-09-12 20:32:40 +01:00
Tomasz Nowicki
88ef16d888 ACPI: I/O Remapping Table (IORT) initial support
IORT shows representation of IO topology for ARM based systems.
It describes how various components are connected together on
parent-child basis e.g. PCI RC -> SMMU -> ITS. Also see IORT spec.
http://infocenter.arm.com/help/topic/com.arm.doc.den0049b/DEN0049B_IO_Remapping_Table.pdf

Initial support allows to detect IORT table presence and save its
root pointer obtained through acpi_get_table(). The pointer validity
depends on acpi_gbl_permanent_mmap because if acpi_gbl_permanent_mmap
is not set while using IORT nodes we would dereference unmapped pointers.

For the aforementioned reason call acpi_iort_init() from acpi_init()
which guarantees acpi_gbl_permanent_mmap to be set at that point.

Add generic helpers which are helpful for scanning and retrieving
information from IORT table content. List of the most important helpers:
- iort_find_dev_node() finds IORT node for a given device
- iort_node_map_rid() maps device RID and returns IORT node which provides
  final translation

IORT support is placed under drivers/acpi/arm64/ new directory due to its
ARM64 specific nature. The code there is considered only for ARM64.
The long term plan is to keep all ARM64 specific tables support
in this place e.g. GTDT table.

Signed-off-by: Tomasz Nowicki <tn@semihalf.com>
Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net>
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-09-12 20:32:30 +01:00
Linus Torvalds
98ac9a608d Merge branch 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:
 "nvdimm fixes for v4.8, two of them are tagged for -stable:

   - Fix devm_memremap_pages() to use track_pfn_insert().  Otherwise,
     DAX pmd mappings end up with an uncached pgprot, and unusable
     performance for the device-dax interface.  The device-dax interface
     appeared in 4.7 so this is tagged for -stable.

   - Fix a couple VM_BUG_ON() checks in the show_smaps() path to
     understand DAX pmd entries.  This fix is tagged for -stable.

   - Fix a mis-merge of the nfit machine-check handler to flip the
     polarity of an if() to match the final version of the patch that
     Vishal sent for 4.8-rc1.  Without this the nfit machine check
     handler never detects / inserts new 'badblocks' entries which
     applications use to identify lost portions of files.

   - For test purposes, fix the nvdimm_clear_poison() path to operate on
     legacy / simulated nvdimm memory ranges.  Without this fix a test
     can set badblocks, but never clear them on these ranges.

   - Fix the range checking done by dax_dev_pmd_fault().  This is not
     tagged for -stable since this problem is mitigated by specifying
     aligned resources at device-dax setup time.

  These patches have appeared in a next release over the past week.  The
  recent rebase you can see in the timestamps was to drop an invalid fix
  as identified by the updated device-dax unit tests [1].  The -mm
  touches have an ack from Andrew"

[1]: "[ndctl PATCH 0/3] device-dax test for recent kernel bugs"
   https://lists.01.org/pipermail/linux-nvdimm/2016-September/006855.html

* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  libnvdimm: allow legacy (e820) pmem region to clear bad blocks
  nfit, mce: Fix SPA matching logic in MCE handler
  mm: fix cache mode of dax pmd mappings
  mm: fix show_smap() for zone_device-pmd ranges
  dax: fix mapping size check
2016-09-10 09:58:52 -07:00
Lorenzo Pieralisi
10b68700ad ACPI / PCI: fix GIC irq model default PCI IRQ polarity
On ACPI ARM based systems the GIC interrupt controller
and corresponding interrupt model permit only the high
polarity for level interrupts.

ACPI firmware describes PCI legacy IRQs through entries
in the _PRT objects. Entries in the _PRT can be of two types:

- Static: not configurable, trigger/polarity default to level-low,
  _PRT entry defines the global GSI interrupt number
- Configurable: _PRT interrupt entry contains a reference to the
  corresponding PCI interrupt link device (that in turn provides the
  interrupt descriptor through its _CRS/_PRS methods)

Configurable IRQ entries are not currently allowed by the ACPI
specification on ARM since they can only be used for interrupt pins that
are routable, as per ACPI specifications (version 6.1, 6.2.13):

"[...] There are two ways that _PRT can be used. Typically, the
interrupt input that a given PCI interrupt is on is configurable. For
example, a given PCI interrupt might be configured for either IRQ 10 or
11 on an 8259 interrupt controller. In this model, each interrupt is
represented in the ACPI namespace as a PCI Interrupt Link Device. [...]"

ARM platforms GIC configurations do not allow dynamic IRQ routing,
since routing is statically laid out at synthesis time; therefore PCI
interrupt links cannot be used for PCI legacy IRQ descriptions in the
_PRT on ARM systems.

On the other hand, current core ACPI code handling PCI legacy IRQs
consider IRQ trigger/polarity for static _PRT entries as level-low.

On ARM systems with a GIC interrupt controller and corresponding
ACPI interrupt model this does not work in that GIC interrupt
controller is only capable of handling level interrupts whose
polarity is high (for PCI legacy IRQs - that are level-low by
specification - this means that the legacy IRQs are inverted before
reaching the interrupt controller pin), resulting in IRQ allocation
failures such as:

genirq: Setting trigger mode 8 for irq 18 failed (gic_set_type+0x0/0x48)

Change the default polarity for PCI legacy IRQs to high on systems
booting wth ACPI on platforms with a GIC interrupt controller model,
fixing the discrepancy between specification and HW behaviour.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Duc Dang <dhdang@apm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-10 02:50:50 +02:00
Lv Zheng
ac0f06ebb8 ACPICA: Tables: Tune table mutex to be a leaf lock
ACPICA commit f564d57c6501b97a2871f0b4c048e79910f71783

This patch tunes MTX_TABLES into a leaf lock by always ensuring it is
released before holding other locks.

This patch also collects all table loading related functions into
acpi_tb_load_table() (invoked by load_table opcode) and
acpi_tb_install_and_load_table() (invoked by Load opcode and acpi_load_table()) so
that we can have lock tuning code collected at the boundary of these 2
functions. Lv Zheng.

Link: https://github.com/acpica/acpica/commit/f564d57c
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Dutch Guy <lucht_piloot@gmx.net>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-10 02:43:03 +02:00
Lv Zheng
441ad11d07 ACPICA: Dispatcher: Fix a mutex issue for method auto serialization
ACPICA commit fd305eda14f1a1e684edef4fac53f194bf00ed3f

This patch fixes an issue with acpi_ds_auto_serialized_method().
The parser will invoke acpi_ex_release_all_mutexes(), which in return
cause mutexes held in ACPI_ERROR_METHOD() failed. Lv Zheng.

Link: https://bugs.acpica.org/show_bug.cgi?id=1324
Link: https://github.com/acpica/acpica/commit/fd305eda
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Greg White <gwhite@kupulau.com>
Tested-by: Dutch Guy <lucht_piloot@gmx.net>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-10 02:43:02 +02:00
Lv Zheng
74f51b80a0 ACPICA: Namespace: Fix dynamic table loading issues
ACPICA commit 767ee53354e0c4b7e8e7c57c6dd7bf569f0d52bb

There are issues related to the namespace/interpreter locks, which causes
several ACPI functionalities not specification compliant. The lock issues
were detectec when we were trying to fix the functionalities (please see
Link # [1] for the details).

What's the lock issues? Let's first look into the namespace/interpreter
lock usages inside of the object evaluation and the table loading which are
the key AML interpretion code paths:
Table loading:
acpi_ns_load_table
	L(Namespace)
	acpi_ns_parse_table
		acpi_ns_one_complete_parse(LOAD_PASS1/LOAD_PASS2)
			acpi_ds_load1_begion_op
			acpi_ds_load1_end_op
			acpi_ds_load2_begion_op
			acpi_ds_load2_end_op
	U(Namespace)
Object evaluation:
acpi_ns_evaluate
	L(Interpreter)
	acpi_ps_execute_method
		acpi_ds_exec_begin_op
		acpi_ds_exec_end_op
			U(Interpreter)
			acpi_ns_load_table
				L(Namespace)
				U(Namespace)
			acpi_ev_initialize_region
				L(Namespace)
				U(Namespace)
			address_space.Setup
			address_space.Handler
			acpi_os_wait_semaphore
			acpi_os_acquire_mutex
			acpi_os_sleep
			L(Interpreter)
	U(Interpreter)
	L(Interpreter)
	acpi_ex_resolve_node_to_value
	U(Interpreter)
	acpi_ns_check_return_value
Where:
  1. L(Interpreter) means acquire(MTX_INTERPRETER);
  2. U(Interpreter) means release(MTX_INTERPRETER);
  3. L(Namespace) means acquire(MTX_NAMESPACE);
  4. U(Namespace) means release(MTX_NAMESPACE);

We can see that acpi_ns_exec_module_code() (which invokes acpi_ns_evaluate) is
implemented in a deferred way just in order to avoid to reacquire the
namespace lock. This is in fact the root cause of many other ACPICA issues:
1. We now know for sure that the module code should be executed right in
   place by the Windows AML interpreter. So in the current design, if
   the region initializations/accesses or the table loadings (where the
   namespace surely should be locked again) happening during the table
   loading period, dead lock could happen because ACPICA never unlocks the
   namespace during the AML interpretion.
2. ACPICA interpreter just ensures that all static namespace nodes (named
   objects created during the acpi_load_tables()) are created
   (acpi_ns_lookup()) with the correct lock held, but doesn't ensure that
   the named objects created by the control method are created with the
   same correct lock held. It requires the control methods to be executed
   in a serial way after "loading a table", that's why ACPICA requires
   method auto serialization.

This patch fixes these software design issues by extending interpreter
enter/exit APIs to hold both interpreter/namespace locks to ensure the lock
order correctness, so that we can get these code paths:
Table loading:
acpi_ns_load_table
	E(Interpreter)
		acpi_ns_parse_table
			acpi_ns_one_complete_parse
			acpi_ns_execute_table
				X(Interpreter)
				acpi_ns_load_table
				acpi_ev_initialize_region
				address_space.Setup
				address_space.Handler
				acpi_os_wait_semaphore
				acpi_os_acquire_mutex
				acpi_os_sleep
				E(Interpreter)
	X(Interpreter)
Object evaluation:
acpi_ns_evaluate
	E(Interpreter)
	acpi_ps_execute_method
		X(Interpreter)
		acpi_ns_load_table
		acpi_ev_initialize_region
		address_space.Setup
		address_space.Handler
		acpi_os_wait_semaphore
		acpi_os_acquire_mutex
		acpi_os_sleep
		E(Interpreter)
	X(Interpreter)
Where:
  1. E(Interpreter) means acquire(MTX_INTERPRETER, MTX_NAMESPACE);
  2. X(Interpreter) means release(MTX_NAMESPACE, MTX_INTERPRETER);

After this change, we can see:
1. All namespace nodes creations are locked by the namespace lock.
2. All namespace nodes referencing are locked with the same lock.
3. But we also can notice a defact that, all namespace nodes deletions
   could be affected by this change. As a consequence,
   acpi_ns_delete_namespace_subtree() may delete a static namespace node that
   is still referenced by the interpreter (for example, the parser scopes).
Currently, we needn't worry about the last defact because in ACPICA, table
unloading is not fully functioning, its design strictly relies on the fact
that when the namespace deletion happens, either the AML table or the OSPMs
should have been notified and thus either the AML table or the OSPMs
shouldn't reference deletion-related namespace nodes during the namespace
deletion. And this change still works with the above restrictions applied.
While making this a-step-forward helps us to correct the wrong grammar to
pull many things back to the correct rail. And pulling things back to the
correct rail in return makes it possible for us to support fully
functioning table unloading after doing many cleanups.

While this patch is generated, all namespace locks are examined to ensure
that they can meet either of the following pattens:
1. L(Namespace)
   U(Namespace)
2. E(Interpreter)
   X(Interpreter)
3. E(Interpreter)
   X(Interpreter)
   L(Namespace)
   U(Namespace)
   E(Interpreter)
   X(Interpreter)
We ensure this by adding X(Interpreter)/E(Interpreter) or removing
U(Namespace)/L(Namespace) for those currently are executed in the following
order:
   E(Interpreter)
   L(Namespace)
   U(Namespace)
   X(Interpreter)
And adding E(Interpreter)/X(Interpreter) for those currently are executed
in the following order:
   X(Interpreter)
   E(Interpreter)

Originally, the interpreter lock is held for the execution AML opcodes, the
namespace lock is held for the named object creation AML opcodes. Since
they are actually same in MS interpreter (can all be executed during the
table loading), we can combine the 2 locks and tune the locking code better
in this way. Lv Zheng.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=153541 # [1]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=121701 # [1]
Link: https://bugs.acpica.org/show_bug.cgi?id=1323
Link: https://github.com/acpica/acpica/commit/767ee533
Reported-and-tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reported-and-tested-by: Greg White <gwhite@kupulau.com>
Reported-and-tested-by: Dutch Guy <lucht_piloot@gmx.net>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-10 02:43:02 +02:00
Lv Zheng
c2d981aaed ACPICA: Namespace: Add acpi_ns_get_node_unlocked()
ACPICA commit 3ef1a1bf5612fe1a629424c09eaaeb6f299d313c

Add acpi_ns_get_node_unlocked() to be used when ACPI_MTX_NAMESPACE is
locked. Lv Zheng.

Link: https://github.com/acpica/acpica/commit/3ef1a1bf
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Greg White <gwhite@kupulau.com>
Tested-by: Dutch Guy <lucht_piloot@gmx.net>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-10 02:43:02 +02:00
Lv Zheng
de56ba95e8 ACPICA: Interpreter: Fix MLC issues by switching to new term_list grammar for table loading
ACPICA commit 0e24fb67cde08d7df7671d7d7b183490dc79707e

The MLC (Module Level Code) is an ACPICA terminology describing the AML
code out of any control method, its support is an indication of the
interpreter behavior during the table loading.

The original implementation of MLC in ACPICA had several issues:
1. Out of any control method, besides of the object creating opcodes, only
   the code blocks wrapped by "If/Else/While" opcodes were supported.
2. The supported MLC code blocks were executed after loading the table
   rather than being executed right in place.
   ============================================================
   The demo of this order issue is as follows:
     Name (OBJ1, 1)
     If (CND1 == 1)
     {
       Name (OBJ2, 2)
     }
     Name (OBJ3, 3)
   The original MLC support created OBJ2 after OBJ3's creation.
   ============================================================
Other than these limitations, MLC support in ACPICA looks correct. And
supporting this should be easy/natural for ACPICA, but enabling of this was
blocked by some ACPICA internal and OSPM specific initialization order
issues we've fixed recently. The wrong support started from the following
false bug fixing commit:
  Commit: 7f0c826a43
  Subject: ACPICA: Add support for module-level executable AML code
  Commit: 9a884ab64a
  Subject: ACPICA: Add additional module-level code support
  ...

We can confirm Windows interpreter behavior via reverse engineering means.
It can be proven that not only If/Else/While wrapped code blocks, all
opcodes can be executed at the module level, including operation region
accesses. And it can be proven that the MLC should be executed right in
place, not in such a deferred way executed after loading the table.

And the above facts indeed reflect the spec words around ACPI definition
block tables (DSDT/SSDT/...), the entire table and the Scope object is
defined by the AML specification in BNF style as:
  AMLCode := def_block_header term_list
  def_scope := scope_op pkg_length name_string term_list
The bodies of the scope opening terms (AMLCode/Scope) are all term_list,
thus the table loading should be no difference than the control method
evaluations as the body of the Method is also defined by the AML
specification as term_list:
  def_method := method_op pkg_length name_string method_flags term_list
The only difference is: after evaluating control method, created named
objects may be freed due to no reference, while named objects created by
the table loading should only be freed after unloading the table.

So this patch follows the spec and the de-facto standard behavior, enables
the new grammar (term_list) for the table loading.

By doing so, beyond the fixes to the above issues, we can see additional
differences comparing to the old grammar based table loading:
1. Originally, beyond the scope opening terms (AMLCode/Scope),
   If/Else/While wrapped code blocks under the scope creating terms
   (Device/power_resource/Processor/thermal_zone) are also supported as
   deferred MLC, which violates the spec defined grammar where object_list
   is enforced. With MLC support improved as non-deferred, the interpreter
   parses such scope creating terms as term_list rather object_list like the
   scope opening terms.
   After probing the Windows behavior and proving that it also parses these
   terms as term_list, we submitted an ECR (Engineering Change Request) to
   the ASWG (ACPI Specification Working Group) to clarify this. The ECR is
   titled as "ASL Grammar Clarification for Executable AML Opcodes" and has
   been accepted by the ASWG. The new grammar will appear in ACPI
   specification 6.2.
2. Originally, Buffer/Package/operation_region/create_XXXField/bank_field
   arguments are evaluated in a deferred way after loading the table. With
   MLC support improved, they are also parsed right in place during the
   table loading.
   This is also Windows compliant and the only difference is the removal
   of the debugging messages implemented before acpi_ds_execute_arguments(),
   see Link # [1] for the details. A previous commit should have ensured
   that acpi_check_address_range() won't regress.

Note that enabling this feature may cause regressions due to long term
Linux ACPI support on top of the wrong grammar. So this patch also prepares
a global option to be used to roll back to the old grammar during the
period between a regression is reported and the regression is
root-cause-fixed. Lv Zheng.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=112911 # [1]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=117671 # [1]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=153541 # [1]
Link: https://github.com/acpica/acpica/issues/122
Link: https://bugs.acpica.org/show_bug.cgi?id=963
Link: https://github.com/acpica/acpica/commit/0e24fb67
Reported-and-tested-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Reported-by: Ehsan <dashesy@gmail.com>
Reported-and-tested-by: Dutch Guy <lucht_piloot@gmx.net>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-10 02:43:02 +02:00
Bob Moore
955f485dc4 ACPICA: Update return value for intenal _OSI method
ACPICA commit 82101009c7c04845edb3495e66a274a613758bca

Instead of 0xFFFFFFFF, _OSI is now defined to return "Ones".
This is for compatibility with Windows. The ACPI spec will
be updated to reflect this.

Link: https://github.com/acpica/acpica/commit/82101009
Reported-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-10 02:43:02 +02:00
Lv Zheng
4e0b26d391 ACPICA: Tables: Override all 64-bit GAS fields when acpi_gbl_use32_bit_fadt_addresses is TRUE
ACPICA commit aaace77db4c3b267a65b75c33f84ace6f65bbcf7

Originally, when acpi_gbl_use32_bit_fadt_addresses is TRUE, GAS override can
only happen when the Address field mismatches.

According to the investigation result, Windows may favor 32-bit FADT
addresses in some cases. So we need this quirk working after enabling full
GAS support. This requires us to override GAS access_size/bit_width/bit_offset
fields as long as acpi_gbl_use32_bit_fadt_addresses is TRUE.
This patch enhances this quirk mechanism to make it working with full GAS
support. Lv Zheng.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=151501
Link: https://github.com/acpica/acpica/commit/aaace77d
Reported-and-tested-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-10 02:43:01 +02:00
Lv Zheng
bdbe5df025 ACPICA: Tables: Add new table events indicating table installation/uninstallation
ACPICA commit ed6a5fbc694f3a27d93014391aa9a6f6fe490461

This patch adds 2 new table events to indicate table
installation/uninstallation.

Currently, as ACPICA never uninstalls tables, this patch thus only adds
table handler invocation for the table installation event. Lv Zheng.

The 2 events are to be used to fix a sysfs table handling issue related to
LoadTable opcode (see Link # [1] below). The actual sysfs fixing code is
not included, the sysfs fixes will be sent as separate patches.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=150841 # [1]
Link: https://github.com/acpica/acpica/commit/ed6a5fbc
Reported-by: Jason Voelz <jason.voelz@intel.com>
Reported-by: Francisco Leoner <francisco.j.lenoer.soto@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-10 02:43:01 +02:00
Lv Zheng
752db10160 ACPICA: Tables: Remove acpi_tb_install_fixed_table()
ACPICA commit 42c7b848d2faa02c7691ef2c53ea741c23cd4665

acpi_tb_install_fixed_table() is now redundant as we've removed the fixed
table indexing mechanism:
  Commit: 8ec3f45907
  Subject: ACPICA: Tables: Fix global table list issues by removing
           fixed table indexes
This patch cleans up the code accordingly.

No functional change. Lv Zheng.

Link: https://bugs.acpica.org/show_bug.cgi?id=1320
Link: https://github.com/acpica/acpica/commit/42c7b848
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-10 02:43:00 +02:00
Bob Moore
eacce4b6ce ACPICA: Add a couple of casts to uthex.c
ACPICA commit 2ba5d3fdaa24d66d67694cbae6ec66971a7a67c1

Required in some environments.

Link: https://github.com/acpica/acpica/commit/2ba5d3fd
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-10 02:43:00 +02:00
Bob Moore
5ebd2eaaef ACPICA: Cleanup for all string-to-integer conversions
ACPICA commit e2e72a351201fd58e4694418859ae2c247dafca0

Consolidate multiple versions of strtoul64 to one common version.
limit possible bases to either 10 or 16.
Handles both implicit and explicit conversions.
Added a 2-character ascii-to-hex function for GPEs and buffers.
Adds a new file, utstrtoul64.c

Link: https://github.com/acpica/acpica/commit/e2e72a35
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-10 02:37:59 +02:00