Celestica is producing card with their own vendor id and device id.
Add these ids to driver to support this card.
Signed-off-by: Vadim Fedorenko <vadfed@fb.com>
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These #ifdefs are not required, so remove them.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use 'resource_size_t' instead of 'unsigned long' when computing the
pci start address, for the benefit of 32-bit platforms.
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Clang does not support this option so the build fails:
error: unknown warning option '-Wno-dangling-pointer' [-Werror,-Wunknown-warning-option]
Use cc-disable-warning so that the option is only added when it is
supported.
Fixes: bd1d129daa ("wifi: ath6k: silence false positive -Wno-dangling-pointer warning on GCC 12")
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20220524145655.869822-1-nathan@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-05-23
We've added 113 non-merge commits during the last 26 day(s) which contain
a total of 121 files changed, 7425 insertions(+), 1586 deletions(-).
The main changes are:
1) Speed up symbol resolution for kprobes multi-link attachments, from Jiri Olsa.
2) Add BPF dynamic pointer infrastructure e.g. to allow for dynamically sized ringbuf
reservations without extra memory copies, from Joanne Koong.
3) Big batch of libbpf improvements towards libbpf 1.0 release, from Andrii Nakryiko.
4) Add BPF link iterator to traverse links via seq_file ops, from Dmitrii Dolgov.
5) Add source IP address to BPF tunnel key infrastructure, from Kaixi Fan.
6) Refine unprivileged BPF to disable only object-creating commands, from Alan Maguire.
7) Fix JIT blinding of ld_imm64 when they point to subprogs, from Alexei Starovoitov.
8) Add BPF access to mptcp_sock structures and their meta data, from Geliang Tang.
9) Add new BPF helper for access to remote CPU's BPF map elements, from Feng Zhou.
10) Allow attaching 64-bit cookie to BPF link of fentry/fexit/fmod_ret, from Kui-Feng Lee.
11) Follow-ups to typed pointer support in BPF maps, from Kumar Kartikeya Dwivedi.
12) Add busy-poll test cases to the XSK selftest suite, from Magnus Karlsson.
13) Improvements in BPF selftest test_progs subtest output, from Mykola Lysenko.
14) Fill bpf_prog_pack allocator areas with illegal instructions, from Song Liu.
15) Add generic batch operations for BPF map-in-map cases, from Takshak Chahande.
16) Make bpf_jit_enable more user friendly when permanently on 1, from Tiezhu Yang.
17) Fix an array overflow in bpf_trampoline_get_progs(), from Yuntao Wang.
====================
Link: https://lore.kernel.org/r/20220523223805.27931-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEBsvAIBsPu6mG7thcrX5LkNig010FAmKL6K0THG1rbEBwZW5n
dXRyb25peC5kZQAKCRCtfkuQ2KDTXWu/CACuaIISoWD91Z4gdCLxpXVhXqeoqD7g
RfwI8r3sXR1MXxhlVGbA7VeU9DQ8e2ExwIedxGu3aCLtqBvMR9bsnTjy7PrmtGHL
PbZbIMDJ+IjH9BRJ3I2gfypQ/kzolnHUk83uXSx3JJPOjvojueJnsoYRU7XbnHoe
ovln6XS8a3XhrOQt9MqEAzv07Woe+edcNJ/Bjx00gXI5OcHYUhCbG+VVjA64NuHe
s3SdkeoNl9aDY+gtnW1TaI0sqGlWhmIGngqXLEa53/0JwfsYSLWMuJ41KQlXqhza
sFz8RC7l1L+yeinKpYaZGyIer/vvttWPl+EXnjAZ786xVg0RdENXM776
=Nez3
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-5.19-20220523' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2022-05-23
this is a pull request of 3 patches for net-next/master.
The first patch is by Julia Lawall and fixes a typo in the peak_usb
driver.
Jakub Kicinski contributes a patch for the kvaser_usb driver to
silence a GCC 12 -Warray-bounds warning.
The last patch is by me, target the ctucanfd platform driver and adds
a missing dependency to HAS_IOMEM.
* tag 'linux-can-next-for-5.19-20220523' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: ctucanfd: platform: add missing dependency to HAS_IOMEM
can: kvaser_usb: silence a GCC 12 -Warray-bounds warning
can: peak_usb: fix typo in comment
====================
Link: https://lore.kernel.org/r/20220523201045.1708855-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Add support for Realtek 8761BUV
- Add HCI_QUIRK_BROKEN_ENHANCED_SETUP_SYNC_CONN quirk
- Add support for RTL8852C
- Add a new PID/VID 0489/e0c8 for MT7921
- Add support for Qualcomm WCN785x
-----BEGIN PGP SIGNATURE-----
iQJNBAABCAA3FiEE7E6oRXp8w05ovYr/9JCA4xAyCykFAmKL8N4ZHGx1aXoudm9u
LmRlbnR6QGludGVsLmNvbQAKCRD0kIDjEDILKfy6EACPSdWECxGv+20lpBmgRbfF
1Ahu2rFfEtK5iDaTiFLqBOczGkaYnhjq9/Er4VsYHMH1DVedOKoTskzfa2V68j0L
xyCU44E0x314YI/B2sWoMAYejkPX265r0292KzZUpXM2s+S0Doh3Z52glMrjh13C
GbaTfukocBZ6HNIiXp8xQLIaD6MbKGhs2VSWuoXLQqASujrixm1ucglsHNbjfL6e
huSL/SoxKukX8qhlO19pJniROLKq0aC5tQSk66ihvhHWlNBTNJYkg6HoJ8vrB81d
lBjVjPjElbTljQIC+PeOSCSeOn+ELizsUdGgWxiZ2fgzgQvko0fDSnGSnpRSCnNH
zxSBs/pn3cgVS6rSIIzFXsnhdBgAoiwqqhwy+bKsi3nnIXGriZMn82Dpr7z/+QWB
di2wKlZSXw8LEhDaBxi8espe1NkdhgSYWI8c2hh40PLkydBpGXwag9FBkMM4cgsU
4p/riOd776EEVtwXI+lDcAdMFcbMLTf094qZWi1of93VUgDPoy8TSy3ZdshupZah
8UQyeKKYb3lxXIXd/i6C/jhYgPvo/8ZWv+OwysPpAzvvyhAagEKS1czSGJ01yjsy
1k+ebPY4CIHBBT23UFYKxD6Tgn9SAiqKtf0XtbYzCV2UD+QtUadc8MeGFtYb+0j1
ybtkiTT++lU3M9KfAMtH8A==
=XFUz
-----END PGP SIGNATURE-----
Merge tag 'for-net-next-2022-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
- Add support for Realtek 8761BUV
- Add HCI_QUIRK_BROKEN_ENHANCED_SETUP_SYNC_CONN quirk
- Add support for RTL8852C
- Add a new PID/VID 0489/e0c8 for MT7921
- Add support for Qualcomm WCN785x
* tag 'for-net-next-2022-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (26 commits)
Bluetooth: hci_sync: use hci_skb_event() helper
Bluetooth: eir: Add helpers for managing service data
Bluetooth: hci_sync: Fix attempting to suspend with unfiltered passive scan
Bluetooth: MGMT: Add conditions for setting HCI_CONN_FLAG_REMOTE_WAKEUP
Bluetooth: btmtksdio: fix the reset takes too long
Bluetooth: btmtksdio: fix possible FW initialization failure
Bluetooth: btmtksdio: fix use-after-free at btmtksdio_recv_event
Bluetooth: btbcm: Add entry for BCM4373A0 UART Bluetooth
Bluetooth: btusb: Add a new PID/VID 0489/e0c8 for MT7921
Bluetooth: btusb: Add 0x0bda:0x8771 Realtek 8761BUV devices
Bluetooth: btusb: Set HCI_QUIRK_BROKEN_ERR_DATA_REPORTING for QCA
Bluetooth: core: Fix missing power_on work cancel on HCI close
Bluetooth: btusb: add support for Qualcomm WCN785x
Bluetooth: protect le accept and resolv lists with hdev->lock
Bluetooth: use hdev lock for accept_list and reject_list in conn req
Bluetooth: use hdev lock in activate_scan for hci_is_adv_monitoring
Bluetooth: btrtl: Add support for RTL8852C
Bluetooth: btusb: Set HCI_QUIRK_BROKEN_ENHANCED_SETUP_SYNC_CONN for QCA
Bluetooth: Print broken quirks
Bluetooth: HCI: Add HCI_QUIRK_BROKEN_ENHANCED_SETUP_SYNC_CONN quirk
...
====================
Link: https://lore.kernel.org/r/20220523204151.3327345-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Fix crash when an LE Connection fails to be established.
-----BEGIN PGP SIGNATURE-----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=Ps3+
-----END PGP SIGNATURE-----
Merge tag 'for-net-2022-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- Fix crash when an LE Connection fails to be established.
* tag 'for-net-2022-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: hci_conn: Fix hci_connect_le_sync
====================
Link: https://lore.kernel.org/r/20220523200349.3322806-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Joanne Koong says:
====================
This patchset implements the basics of dynamic pointers in bpf.
A dynamic pointer (struct bpf_dynptr) is a pointer that stores extra metadata
alongside the address it points to. This abstraction is useful in bpf given
that every memory access in a bpf program must be safe. The verifier and bpf
helper functions can use the metadata to enforce safety guarantees for things
such as dynamically sized strings and kernel heap allocations.
From the program side, the bpf_dynptr is an opaque struct and the verifier
will enforce that its contents are never written to by the program.
It can only be written to through specific bpf helper functions.
There are several uses cases for dynamic pointers in bpf programs. Some
examples include: dynamically sized ringbuf reservations without extra
memcpys, dynamic string parsing and memory comparisons, dynamic memory
allocations that can be persisted in maps, and dynamic + ergonomic parsing of
sk_buff and xdp_md packet data.
At a high-level, the patches are as follows:
1/6 - Adds verifier support for dynptrs
2/6 - Adds bpf_dynptr_from_mem (local dynptr)
3/6 - Adds dynptr support for ring buffers
4/6 - Adds bpf_dynptr_read and bpf_dynptr_write
5/6 - Adds dynptr data slices (ptr to the dynptr data)
6/6 - Tests to check that the verifier rejects invalid cases and passes valid ones
This is the first dynptr patchset in a larger series. The next series of
patches will add dynptrs that support dynamic memory allocations that can also
be persisted in maps, support for parsing packet data through dynptrs, convenience
helpers for using dynptrs as iterators, and more helper functions for interacting
with strings and memory dynamically.
Changelog:
----------
v5 -> v6:
v5:
https://lore.kernel.org/bpf/20220520044245.3305025-1-joannelkoong@gmail.com/
* enforce PTR_TO_MAP_VALUE for bpf_dynptr_from_mem data in check_helper_call
instead of using DYNPTR_TYPE_LOCAL when checking func arg compatiblity
* remove MEM_DYNPTR modifier
v4 -> v5:
v4:
https://lore.kernel.org/bpf/20220509224257.3222614-1-joannelkoong@gmail.com/
* Remove malloc dynptr; this will be part of the 2nd patchset while we
figure out memory accounting
* For data slices, only set the register's ref_obj_id to dynptr_id (Alexei)
* Tidying (eg remove "inline", move offset checking to "check_func_arg_reg_off")
(David)
* Add a few new test cases, remove malloc-only ones.
v3 -> v4:
v3:
https://lore.kernel.org/bpf/20220428211059.4065379-1-joannelkoong@gmail.com/
1/6 - Change mem ptr + size check to use more concise inequality expression
(David + Andrii)
2/6 - Add check for meta->uninit_dynptr_regno not already set (Andrii)
Move DYNPTR_TYPE_FLAG_MASK to include/linux/bpf.h (Andrii)
3/6 - Remove four underscores for invoking BPF_CALL (Andrii)
Add __BPF_TYPE_FLAG_MAX and use it for __BPF_TYPE_LAST_FLAG (Andrii)
4/6 - Fix capacity to be bpf_dynptr size value in check_off_len (Andrii)
Change -EINVAL to -E2BIG if len + offset is out of bounds (Andrii)
5/6 - Add check for only 1 dynptr arg for dynptr data function (Andrii)
6/6 - For ringbuf map, set max_entries from userspace (Andrii)
Use err ?: ... for interactring with dynptr APIs (Andrii)
Define array_map2 for add_dynptr_to_map2 test where value is a struct
with an embedded dynptr
Remove ref id from missing_put_callback message, since on different
environments, ref id is not always = 1
v2 -> v3:
v2:
https://lore.kernel.org/bpf/20220416063429.3314021-1-joannelkoong@gmail.com/
* Reorder patches (move ringbuffer patch to be right after the verifier +
* malloc
dynptr patchset)
* Remove local type dynptrs (Andrii + Alexei)
* Mark stack slot as STACK_MISC after any writes into a dynptr instead of
* explicitly prohibiting writes (Alexei)
* Pass number of slots, not memory size to is_spi_bounds_valid (Kumar)
* Check reference leaks by adding dynptr id to state->refs instead of checking
stack slots (Alexei)
v1 -> v2:
v1: https://lore.kernel.org/bpf/20220402015826.3941317-1-joannekoong@fb.com/
1/7 -
* Remove ARG_PTR_TO_MAP_VALUE_UNINIT alias and use
ARG_PTR_TO_MAP_VALUE | MEM_UNINIT directly (Andrii)
* Drop arg_type_is_mem_ptr() wrapper function (Andrii)
2/7 -
* Change name from MEM_RELEASE to OBJ_RELEASE (Andrii)
* Use meta.release_ref instead of ref_obj_id != 0 to determine whether
to release reference (Kumar)
* Drop type_is_release_mem() wrapper function (Andrii)
3/7 -
* Add checks for nested dynptrs edge-cases, which could lead to corrupt
* writes of the dynptr stack variable.
* Add u64 flags to bpf_dynptr_from_mem() and bpf_dynptr_alloc() (Andrii)
* Rename from bpf_malloc/bpf_free to bpf_dynptr_alloc/bpf_dynptr_put
(Alexei)
* Support alloc flag __GFP_ZERO (Andrii)
* Reserve upper 8 bits in dynptr size and offset fields instead of
reserving just the upper 4 bits (Andrii)
* Allow dynptr zero-slices (Andrii)
* Use the highest bit for is_rdonly instead of the 28th bit (Andrii)
* Rename check_* functions to is_* functions for better readability
(Andrii)
* Add comment for code that checks the spi bounds (Andrii)
4/7 -
* Fix doc description for bpf_dynpt_read (Toke)
* Move bpf_dynptr_check_off_len() from function patch 1 to here (Andrii)
5/7 -
* When finding the id for the dynptr to associate the data slice with,
look for dynptr arg instead of assuming it is BPF_REG_1.
6/7 -
* Add __force when casting from unsigned long to void * (kernel test
* robot)
* Expand on docs for ringbuf dynptr APIs (Andrii)
7/7 -
* Use table approach for defining test programs and error messages
* (Andrii)
* Print out full log if there’s an error (Andrii)
* Use bpf_object__find_program_by_name() instead of specifying
program name as a string (Andrii)
* Add 6 extra cases: invalid_nested_dynptrs1, invalid_nested_dynptrs2,
invalid_ref_mem1, invalid_ref_mem2, zero_slice_access,
and test_alloc_zero_bytes
* Add checking for edge cases (eg allocing with invalid flags)
====================
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
This patch adds tests for dynptrs, which include cases that the
verifier needs to reject (for example, a bpf_ringbuf_reserve_dynptr
without a corresponding bpf_ringbuf_submit/discard_dynptr) as well
as cases that should successfully pass.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220523210712.3641569-7-joannelkoong@gmail.com
This patch adds a new helper function
void *bpf_dynptr_data(struct bpf_dynptr *ptr, u32 offset, u32 len);
which returns a pointer to the underlying data of a dynptr. *len*
must be a statically known value. The bpf program may access the returned
data slice as a normal buffer (eg can do direct reads and writes), since
the verifier associates the length with the returned pointer, and
enforces that no out of bounds accesses occur.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220523210712.3641569-6-joannelkoong@gmail.com
This patch adds two helper functions, bpf_dynptr_read and
bpf_dynptr_write:
long bpf_dynptr_read(void *dst, u32 len, struct bpf_dynptr *src, u32 offset);
long bpf_dynptr_write(struct bpf_dynptr *dst, u32 offset, void *src, u32 len);
The dynptr passed into these functions must be valid dynptrs that have
been initialized.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220523210712.3641569-5-joannelkoong@gmail.com
Currently, our only way of writing dynamically-sized data into a ring
buffer is through bpf_ringbuf_output but this incurs an extra memcpy
cost. bpf_ringbuf_reserve + bpf_ringbuf_commit avoids this extra
memcpy, but it can only safely support reservation sizes that are
statically known since the verifier cannot guarantee that the bpf
program won’t access memory outside the reserved space.
The bpf_dynptr abstraction allows for dynamically-sized ring buffer
reservations without the extra memcpy.
There are 3 new APIs:
long bpf_ringbuf_reserve_dynptr(void *ringbuf, u32 size, u64 flags, struct bpf_dynptr *ptr);
void bpf_ringbuf_submit_dynptr(struct bpf_dynptr *ptr, u64 flags);
void bpf_ringbuf_discard_dynptr(struct bpf_dynptr *ptr, u64 flags);
These closely follow the functionalities of the original ringbuf APIs.
For example, all ringbuffer dynptrs that have been reserved must be
either submitted or discarded before the program exits.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/bpf/20220523210712.3641569-4-joannelkoong@gmail.com
This patch adds a new api bpf_dynptr_from_mem:
long bpf_dynptr_from_mem(void *data, u32 size, u64 flags, struct bpf_dynptr *ptr);
which initializes a dynptr to point to a bpf program's local memory. For now
only local memory that is of reg type PTR_TO_MAP_VALUE is supported.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220523210712.3641569-3-joannelkoong@gmail.com
This patch adds the bulk of the verifier work for supporting dynamic
pointers (dynptrs) in bpf.
A bpf_dynptr is opaque to the bpf program. It is a 16-byte structure
defined internally as:
struct bpf_dynptr_kern {
void *data;
u32 size;
u32 offset;
} __aligned(8);
The upper 8 bits of *size* is reserved (it contains extra metadata about
read-only status and dynptr type). Consequently, a dynptr only supports
memory less than 16 MB.
There are different types of dynptrs (eg malloc, ringbuf, ...). In this
patchset, the most basic one, dynptrs to a bpf program's local memory,
is added. For now only local memory that is of reg type PTR_TO_MAP_VALUE
is supported.
In the verifier, dynptr state information will be tracked in stack
slots. When the program passes in an uninitialized dynptr
(ARG_PTR_TO_DYNPTR | MEM_UNINIT), the stack slots corresponding
to the frame pointer where the dynptr resides at are marked
STACK_DYNPTR. For helper functions that take in initialized dynptrs (eg
bpf_dynptr_read + bpf_dynptr_write which are added later in this
patchset), the verifier enforces that the dynptr has been initialized
properly by checking that their corresponding stack slots have been
marked as STACK_DYNPTR.
The 6th patch in this patchset adds test cases that the verifier should
successfully reject, such as for example attempting to use a dynptr
after doing a direct write into it inside the bpf program.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/bpf/20220523210712.3641569-2-joannelkoong@gmail.com
Kernel Test Robot complains about passing zero to PTR_ERR for the said
line, suppress it by using PTR_ERR_OR_ZERO.
Fixes: c0a5a21c25 ("bpf: Allow storing referenced kptr in map")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220521132620.1976921-1-memxor@gmail.com
Introduce bpf_arch_text_invalidate and use it to fill unused part of the
bpf_prog_pack with illegal instructions when a BPF program is freed.
Fixes: 57631054fa ("bpf: Introduce bpf_prog_pack allocator")
Fixes: 33c9805860 ("bpf: Introduce bpf_jit_binary_pack_[alloc|finalize|free]")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220520235758.1858153-4-song@kernel.org
Introduce a memset like API for text_poke. This will be used to fill the
unused RX memory with illegal instructions.
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/bpf/20220520235758.1858153-3-song@kernel.org
bpf_prog_pack enables sharing huge pages among multiple BPF programs.
These pages are marked as executable before the JIT engine fill it with
BPF programs. To make these pages safe, fill the hole bpf_prog_pack with
illegal instructions before making it executable.
Fixes: 57631054fa ("bpf: Introduce bpf_prog_pack allocator")
Fixes: 33c9805860 ("bpf: Introduce bpf_jit_binary_pack_[alloc|finalize|free]")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220520235758.1858153-2-song@kernel.org
The kernel test robot noticed that the ctucanfd platform driver fails
during modpost on platforms that don't support IOMEM.
| ERROR: modpost: "devm_ioremap_resource" [drivers/net/can/ctucanfd/ctucanfd_platform.ko] undefined!
This patch adds the missing HAS_IOMEM dependency.
Link: https://lore.kernel.org/all/20220523123720.1656611-1-mkl@pengutronix.de
Fixes: e8f0c23a24 ("can: ctucanfd: CTU CAN FD open-source IP core - platform/SoC support.")
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Cc: Ondrej Ille <ondrej.ille@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This driver does a lot of casting of smaller buffers to
struct kvaser_cmd_ext, GCC 12 does not like that:
| drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c:489:65: warning: array subscript ‘struct kvaser_cmd_ext[0]’ is partly outside array bounds of ‘unsigned char[32]’ [-Warray-bounds]
| drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c:489:23: note: in expansion of macro ‘le16_to_cpu’
| 489 | ret = le16_to_cpu(((struct kvaser_cmd_ext *)cmd)->len);
| | ^~~~~~~~~~~
Temporarily silence this warning (move it to W=1 builds).
Link: https://lore.kernel.org/all/20220520194659.2356903-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tested-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The handling of connection failures shall be handled by the request
completion callback as already done by hci_cs_le_create_conn, also make
sure to use hci_conn_failed instead of hci_le_conn_failed as the later
don't actually call hci_conn_del to cleanup.
Link: https://github.com/bluez/bluez/issues/340
Fixes: 8e8b92ee60 ("Bluetooth: hci_sync: Add hci_le_create_conn_sync")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Spelling mistake (triple letters) in comment.
Detected with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/bpf/20220521111145.81697-84-Julia.Lawall@inria.fr
Spelling mistake (triple letters) in comment.
Detected with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Daniel Müller <deso@posteo.net>
Link: https://lore.kernel.org/bpf/20220521111145.81697-71-Julia.Lawall@inria.fr
Maciej Fijalkowski has gracefully accepted to become the third
maintainer for the AF_XDP code. Thank you Maciej!
Signed-off-by: Magnus Karlsson <magnus.karlsson@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn@kernel.org>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20220523083254.32285-1-magnus.karlsson@gmail.com
This instance is the only opencoded version of the macro, so have it
follow suit.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
If found, register the DSA internally allocated slave_mii_bus with an OF
"mdio" child object. It can save some drivers from creating their
custom internal MDIO bus.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Looks like almost all changes to this driver had been tree-wide
refactoring since git era begun. There is one commit from Al
15 years ago which could potentially be fixing a real bug.
The driver is using virt_to_bus() and is a real magnet for pointless
cleanups. It seems unlikely to have real users. Let's try to shed
this maintenance burden.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Preserve the error code from mtk_foe_entry_commit(). Do not return
success.
Fixes: c4f033d9e0 ("net: ethernet: mtk_eth_soc: rework hardware flow table management")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean says:
====================
DSA changes for multiple CPU ports (part 2)
As explained in part 1:
https://patchwork.kernel.org/project/netdevbpf/cover/20220511095020.562461-1-vladimir.oltean@nxp.com/
I am trying to enable the second internal port pair from the NXP LS1028A
Felix switch for DSA-tagged traffic via "ocelot-8021q". This series
represents part 2 (of an unknown number) of that effort.
This series deals only with a minor bug fix (first patch) and with code
reorganization in the Felix DSA driver and in the Ocelot switch library.
Hopefully this will lay the ground for a clean introduction of new UAPI
for changing the DSA master of a user port in part 3.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Update the VCAP filters to support multiple tag_8021q CPU ports.
TX works using a filter for VLAN ID on the ingress of the CPU port, with
a redirect and a VLAN pop action. This can be updated trivially by
amending the ingress port mask of this rule to match on all tag_8021q
CPU ports.
RX works using a filter for ingress port on the egress of the CPU port,
with a VLAN push action. Here we need to replicate these filters for
each tag_8021q CPU port, and let them all have the same action.
This means that the OCELOT_VCAP_ES0_TAG_8021Q_RXVLAN() cookie needs to
encode a unique value for every {user port, CPU port} pair it's given.
Do this by encoding the CPU port in the upper 16 bits of the cookie, and
the user port in the lower 16 bits.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is a desire for the felix driver to gain support for multiple
tag_8021q CPU ports, but the current model prevents it.
This is because ocelot_apply_bridge_fwd_mask() only takes into
consideration whether a port is a tag_8021q CPU port, but not whose CPU
port it is.
We need a model where we can have a direct affinity between an ocelot
port and a tag_8021q CPU port. This serves as the basis for multiple CPU
ports.
Declare a "dsa_8021q_cpu" backpointer in struct ocelot_port which
encodes that affinity. Repurpose the "ocelot_set_dsa_8021q_cpu" API to
"ocelot_assign_dsa_8021q_cpu" to express the change of paradigm.
Note that this change makes the first practical use of the new
ocelot_port->index field in ocelot_port_unassign_dsa_8021q_cpu(), where
we need to remove the old tag_8021q CPU port from the reserved VLAN range.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Absorb the final details of calling ocelot_port_{,un}set_dsa_8021q_cpu(),
i.e. the need to lock &ocelot->fwd_domain_lock, into the callee, to
simplify the caller and permit easier code reuse later.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add more logic to ocelot_port_{,un}set_dsa_8021q_cpu() from the ocelot
switch lib by encapsulating the ocelot_apply_bridge_fwd_mask() call that
felix used to have.
This is necessary because the CPU port change procedure will also need
to do this, and it's good to reduce code duplication by having an entry
point in the ocelot switch lib that does all that is needed.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
PGID_CPU must be updated every time a port is configured or unconfigured
as a tag_8021q CPU port. The ocelot switch lib already has a hook for
that operation, so move the updating of PGID_CPU to those hooks.
These bits are pretty specific to DSA, so normally I would keep them out
of the common switch lib, but when tag_8021q is in use, this has
implications upon the forwarding mask determined by
ocelot_apply_bridge_fwd_mask() and called extensively by the switch lib.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
PGID_BC is configured statically by ocelot_init() to flood towards the
CPU port module, and dynamically by ocelot_port_set_bcast_flood()
towards all user ports.
When the tagging protocol changes, the intention is to turn off flooding
towards the old pipe towards the host, and to turn it on towards the new
pipe.
Due to a recent change which removed the adjustment of PGID_BC from
felix_set_host_flood(), 3 things happen.
- when we change from NPI to tag_8021q mode: in this mode, the CPU port
module is accessed via registers, and used to read PTP packets with
timestamps. We fail to disable broadcast flooding towards the CPU port
module, and to enable broadcast flooding towards the physical port
that serves as a DSA tag_8021q CPU port.
- from tag_8021q to NPI mode: in this mode, the CPU port module is
redirected to a physical port. We fail to disable broadcast flooding
towards the physical tag_8021q CPU port, and to enable it towards the
CPU port module at ocelot->num_phys_ports.
- when the ports are put in promiscuous mode, we also fail to update
PGID_BC towards the host pipe of the current protocol.
First issue means that felix_check_xtr_pkt() has to do extra work,
because it will not see only PTP packets, but also broadcasts. It needs
to dequeue these packets just to drop them.
Third issue is inconsequential, since PGID_BC is allocated from the
nonreserved multicast PGID space, and these PGIDs are conveniently
initialized to 0x7f (i.e. flood towards all ports except the CPU port
module). Broadcasts reach the NPI port via ocelot_init(), and reach the
tag_8021q CPU port via the hardware defaults.
Second issue is also inconsequential, because we fail both at disabling
and at enabling broadcast flooding on a port, so the defaults mentioned
above are preserved, and they are fine except for the performance impact.
Fixes: 7a29d220f4 ("net: dsa: felix: reimplement tagging protocol change with function pointers")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the process of checking whether RDMAv2 is available, the current
implementation first sets ini->smcrv2.ib_dev_v2, and then allocates
smc buf desc, but the latter may fail. Unfortunately, the caller
will only check the former. In this case, a NULL pointer reference
will occur in smc_clc_send_confirm_accept() when accessing
conn->rmb_desc.
This patch does two things:
1. Use the return code to determine whether V2 is available.
2. If the return code is NODEV, continue to check whether V1 is
available.
Fixes: e49300a6bf ("net/smc: add listen processing for SMC-Rv2")
Signed-off-by: liuyacan <liuyacan@corp.netease.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Same trigger condition as commit 86434744. When setsockopt runs
in parallel to a connect(), and switch the socket into fallback
mode. Then the sk_refcnt is incremented in smc_connect(), but
its state stay in SMC_INIT (NOT SMC_ACTIVE). This cause the
corresponding sk_refcnt decrement in __smc_release() will not be
performed.
Fixes: 86434744fe ("net/smc: add fallback check to connect()")
Signed-off-by: liuyacan <liuyacan@corp.netease.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski says:
====================
Fix/silence GCC 12 warnings in drivers/net/wireless/
as mentioned off list we'd like to get GCC 12 warnings quashed.
This set takes care of the warnings we have in drivers/net/wireless/
mostly by relegating them to W=1/W=2 builds.
====================
Link: https://lore.kernel.org/r/20220520194320.2356236-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
carl9170 has a big union (struct carl9170_cmd) with all the command
types in it. But it allocates buffers only large enough for a given
command. This upsets GCC 12:
drivers/net/wireless/ath/carl9170/cmd.c:125:30: warning: array subscript ‘struct carl9170_cmd[0]’ is partly outside array bounds of ‘unsigned char[8]’ [-Warray-bounds]
125 | tmp->hdr.cmd = cmd;
| ~~~~~~~~~~~~~^~~~~
Punt the warning to W=1 for now. Hopefully GCC will learn to
recognize which fields are in-bounds.
Acked-by: Christian Lamparter <chunkeey@gmail.com>
Acked-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
GCC 12 really doesn't like partial struct allocations:
drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:2202:32: warning: array subscript ‘struct brcmf_ext_join_params_le[0]’ is partly outside array bounds of ‘void[70]’ [-Warray-bounds]
2202 | ext_join_params->scan_le.passive_time =
| ^~
brcmfmac is trying to save 2 bytes at the end by either allocating
or not allocating a channel member. Let's keep @join_params_size
the "right" size but kmalloc() the full structure.
Acked-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
GCC 12 says:
drivers/net/wireless/intel/iwlwifi/mvm/sta.c:1076:37: warning: array subscript -1 is below array bounds of ‘struct iwl_mvm_tid_data[9]’ [-Warray-bounds]
1076 | if (mvmsta->tid_data[tid].state != IWL_AGG_OFF)
| ~~~~~~~~~~~~~~~~^~~~~
Whatever, tid is a bit from for_each_set_bit(), it's clearly unsigned.
Acked-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For some reason GCC 12 decided to complain about the common
pattern of queuing an object onto a list on the stack in ath6k:
inlined from ‘ath6kl_htc_mbox_tx’ at drivers/net/wireless/ath/ath6kl/htc_mbox.c:1142:3:
include/linux/list.h:74:19: warning: storing the address of local variable ‘queue’ in ‘*&packet_15(D)->list.prev’ [-Wdangling-pointer=]
74 | new->prev = prev;
| ~~~~~~~~~~^~~~~~
Move the warning to W=1, hopefully it goes away with a compiler
update.
Acked-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The .value is a two-dim array, not a pointer.
struct iqk_matrix_regs {
bool iqk_done;
long value[1][IQK_MATRIX_REG_NUM];
};
Acked-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
GCC 12 says:
drivers/net/wireless/ath/ath9k/mac.c: In function ‘ath9k_hw_resettxqueue’:
drivers/net/wireless/ath/ath9k/mac.c:373:22: warning: array subscript 32 is above array bounds of ‘struct ath9k_tx_queue_info[10]’ [-Warray-bounds]
373 | qi = &ah->txq[q];
| ~~~~~~~^~~
I don't know where it got the 32 from, relegate the warning to W=1+.
Acked-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
