This commit changes logic to handle with the status of the device
at first checking for close state to return directly instead
of just do the stuff when device is open. This improves readability
avoiding one level indentation.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit changes type for device_open_status field of ks_wlan_private
structure from int to bool. This variable is only be set to 1
on ks_wlan_net_start and set to 0 on ks_wlan_net_stop. For this
purpose it is not necessary at all to use an integer because a bool
is enough. This also renames field name from device_open_status to
is_device_open.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit assigns dev_alloc_name() call to 'ret' variable to
check it after instead of check directly the call in the if
condition. This improves a bit readability. It also add an empty
line before the new assignment to separate it from the previous
check statement block.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit replaces type unsigned char which is the one which
is being used for firmware buffers with u8 type which is preferred.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit reviews and fixes error paths in ks7010_sdio_remove
driver function. It change logic to handle error directly
after priv dereference to avoid one level indentation. It also
removes a temporal netdev variable which wasn't being used in all
of the function calls. Also if send_stop_request call fails it
was making a direct 'return' instead of doing a properly cleaning.
Because of this a new 'err_free_card' label has been added.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit replaces deprecated create_workqueue call with the
alloc_workqueue one which is the one to be used now for this
purpose.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit moves MODULE_DEVICE_TABLE related code to the end of
the file. This is not necessary at all but moving it just before
its use improves readability.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit use an and operator in a if condition to avoid one
indentation level which is not needed at all.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit reviews debug and error messages in code located
in ks7010_sdio source file avoiding to use 'error' or 'ks7010'
because this file is using netdev_* functions and has non
sense to repeat information in log messages.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit reviews comment style used in ks7010_sdio source file
in order to be coherent with the rest of the code. Most comments
in this source are before definitions but only two of them have
been written at the right. So, be coherent moving this two to the
top of definitions. Also fix one multiline comment style to use
the normal preferred kernel style.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit adds REG suffix to register definitions related
with SDIO in order to improve readability.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit removes two definitions inside ks7010_sdio source file
because they are not being used at all.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit moves SDIO related register definitions from header
to source file. There is no need to have those into the header
because they are only being used in specific SDIO code.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit moves ROM_FILE from header to source file because
there is not being used outside this.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit removes casts in calls to michael_mic_function.
Most of them are nosense because types match perfectly function
parameters. To avoid also int casting for len parameter just
pass unsigned len to function which makes sense because is only
being called with unsigned int len parameters.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When refactoring the function msdc_init_gpd_bd, an error in the
calculation of the bd.next address was introduced. The offset has to
be added to the base address, not multiplied.
Fixes: 8f2395586c ("staging: mt7621-mmc: Refactor msdc_init_gpd_bd")
Reported-by: NeilBrown <neil@brown.name>
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Tested-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The card_workqueue field of msdc_host is already if 0'd out and there
are no references to it in the code (not even in unused code), so
remove it.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Reviewed-by: NeilBrown <neil@brown.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the current code there are '#if 0' out references on using a
tasklet instead of delayed_work. Removing these improves readability.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Reviewed-by: NeilBrown <neil@brown.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The functions msdc_command_resp and msdc_do_request are always called
with the host->lock lock held. By adding annotations, sparse is
informed about that.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Reviewed-by: NeilBrown <neil@brown.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Current code discard the address space information on the base address
of the mmc controller, that causes sparse warnings. It uses the raw
read write function, that is correct for the mips architecture (little
endian), but for portability the non-raw function should be used. Also
the clear/set bit macros do direct memory access, that is also correct
for mips, but not portable.
So the type of the base address is changed to void __iomem *, that is
the type returned by the ioremap function. The set/clear bit macros
are changed to functions, that use the portable read and write
functions. The use of the raw access functions is changed to use the
non-raw ones.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Reviewed-by: NeilBrown <neil@brown.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently the dma direction is manually determined by the read status,
there is a more portable function for it, mmc_get_dma_dir, use it.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Reviewed-by: NeilBrown <neil@brown.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The dma_map_sg function may merge several sglist entries into one, the
return value has to be saved to consider that. The data->sg_count
field is the position, where it should be saved, like it is done in
other mmc host drivers. Also the count of mapped entries is needed for
the dma setup.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Reviewed-by: NeilBrown <neil@brown.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix checkpatch: multiple assignments should be avoided, to improve
readability.
It aslo moves the second assignment out of the if/else block, that is
valid, because drv_mode is of type msdc_mode, an enum with only those
three elements, so one of the if/ else if statements is always
taken. And the second assignment can happen after the conditions.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Reviewed-by: NeilBrown <neil@brown.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the msdc_drv_pm function the variable mmc is dereferenced before
checked. Reordering fixes that.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 5a3e59ce3a, because the
necessary changes were applied in the "staging: nvec: convert to use GPIO
descriptors" patch.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch is to add driver for the DPAA2 1588 timer module (RTC)
which interfaces to up to an unlimited number of 10/100/1000 or
10G ethernet MACs, providing current time, alarm, and fiper support.
The 1588 IP control block includes these distinctive features.
- External GPIO trigger for time-stamping
- 2 Time-stamp alarms
- 3 FIPER pulse generators
- Phase adjusted output timer clock
Currently this driver only supports basic functions like
settime/gettime/adjtime/adjfreq.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove unneeded call to dev_set_drvdata(dev, NULL) since the device
will be deallocated in any case.
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change the mapping of the QBMan cache enabled area from using ioremap_wc()
to devm_memremap(). This allows the __iomem attribute to be removed from
the pointer (which makes sense as accesses treat this as cacheable memory
not IO memory). These changes allow sparse checks to pass.
Also use devm_ioremap() for the cache inhibited area so unmap occurs
automatically when the device is released.
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dm_TXPowerTrackingCallback_TSSI() is never called in atomic context.
dm_TXPowerTrackingCallback_TSSI() is only called by
dm_txpower_trackingcallback(), which is set a parameter of
INIT_DELAYED_WORK() in rtl8192_init_priv_task().
Despite never getting called from atomic context,
dm_TXPowerTrackingCallback_TSSI() calls mdelay() to busily wait.
This is not necessary and can be replaced with usleep_range() to
avoid busy waiting.
This is found by a static analysis tool named DCNS written by myself.
And I also manually check it
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rtl8192_usb_disconnect() is never called in atomic context.
rtl8192_usb_disconnect() is only set as ".disconnect" in
struct usb_driver.
Despite never getting called from atomic context,
rtl8192_usb_disconnect() calls mdelay() to busily wait.
This is not necessary and can be replaced with usleep_range() to
avoid busy waiting.
This is found by a static analysis tool named DCNS written by myself.
And I also manually check it.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ieee80211_softmac_init() is never called in atomic context.
The call chains ending up at ieee80211_softmac_init() is:
[1] ieee80211_softmac_init() <- alloc_ieee80211_rsl() <-
rtl8192_usb_probe()
rtl8192_usb_probe() is set as ".probe" in struct usb_driver.
Despite never getting called from atomic context,
ieee80211_softmac_init() calls kzalloc() with GFP_ATOMIC,
which does not sleep for allocation.
GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL,
which can sleep and improve the possibility of sucessful allocation.
This is found by a static analysis tool named DCNS written by myself.
And I also manually check it.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
prism2_wep_init() is never called in atomic context.
prism2_wep_init() is only set as ".init" in
struct ieee80211_crypto_ops.
The call chains ending up at "->init" function are:
[1] ->init() <- ieee80211_wpa_set_encryption() <-
ieee80211_wpa_supplicant_ioctl()
[2] ->init() <- ieee80211_wx_set_encode_ext_rsl() <-
r8192_wx_set_enc_ext()
[3] ->init() <- ieee80211_wx_set_encode_rsl() <-
r8192_wx_set_enc()
ieee80211_wpa_supplicant_ioctl(), r8192_wx_set_enc_ext() and
r8192_wx_set_enc() call mutex_lock(), which indicates these functions
are not called in atomic context.
Despite never getting called from atomic context,
prism2_wep_init() calls kzalloc() with GFP_ATOMIC,
which does not sleep for allocation.
GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL,
which can sleep and improve the possibility of sucessful allocation.
This is found by a static analysis tool named DCNS written by myself.
And I also manually check it
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ieee80211_tkip_init() is never called in atomic context.
ieee80211_tkip_init() is only set as ".init" in
struct ieee80211_crypto_ops.
The call chains ending up at "->init" function are:
[1] ->init() <- ieee80211_wpa_set_encryption() <-
ieee80211_wpa_supplicant_ioctl()
[2] ->init() <- ieee80211_wx_set_encode_ext_rsl() <-
r8192_wx_set_enc_ext()
[3] ->init() <- ieee80211_wx_set_encode_rsl() <-
r8192_wx_set_enc()
ieee80211_wpa_supplicant_ioctl(), r8192_wx_set_enc_ext() and
r8192_wx_set_enc() call mutex_lock(), which indicates these functions
are not called in atomic context.
Despite never getting called from atomic context,
ieee80211_tkip_init() calls kzalloc() with GFP_ATOMIC,
which does not sleep for allocation.
GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL,
which can sleep and improve the possibility of sucessful allocation.
This is found by a static analysis tool named DCNS written by myself.
And I also manually check it.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ieee80211_ccmp_init() is never called in atomic context.
ieee80211_ccmp_init() is only set as ".init" in
struct ieee80211_crypto_ops.
The call chains ending up at "->init" function are:
[1] ->init() <- ieee80211_wpa_set_encryption() <-
ieee80211_wpa_supplicant_ioctl()
[2] ->init() <- ieee80211_wx_set_encode_ext_rsl() <-
r8192_wx_set_enc_ext()
[3] ->init() <- ieee80211_wx_set_encode_rsl() <-
r8192_wx_set_enc()
ieee80211_wpa_supplicant_ioctl(), r8192_wx_set_enc_ext() and
r8192_wx_set_enc() call mutex_lock(), which indicates these functions
are not called in atomic context.
Despite never getting called from atomic context,
ieee80211_ccmp_init() calls kzalloc() with GFP_ATOMIC,
which does not sleep for allocation.
GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL,
which can sleep and improve the possibility of sucessful allocation.
This is found by a static analysis tool named DCNS written by myself.
And I also manually check it.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Added blank spaces between a plus sign in order to standardize the coding
style.
Signed-off-by: Joao Dalben <jhdalben@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix most checkpatch.pl issues of type:
CHECK: Alignment should match open parenthesis
Signed-off-by: Gabriel Francisco Mandaji <gfmandaji@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove dependencies on HAS_DMA where a Kconfig symbol depends on another
symbol that implies HAS_DMA, and, optionally, on "|| COMPILE_TEST".
In most cases this other symbol is an architecture or platform specific
symbol, or PCI.
Generic symbols and drivers without platform dependencies keep their
dependencies on HAS_DMA, to prevent compiling subsystems or drivers that
cannot work anyway.
This simplifies the dependencies, and allows to improve compile-testing.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We need to free the kthreads in error case before leaving
vchiq_init_state() otherwise we leak resources.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move all calls of wake_up_process to one point, whichs makes the
following implementation of clean-up code easier.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
vchiq_initialise() is used in non-interrupt context, so we can
replace udelay with usleep_range as suggested by timers-howto.txt.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Multiline dereferences aren't nice to review. So fix this checkpatch
warning.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It's better to use the __func__ macro instead of open-code the function
name. This fixes the following checkpatch warning:
WARNING: Prefer using '"%s...", __func__' to using 'x',
this function's name, in a string
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hiding memset behind a macro isn't the best, because it relies on that
the parameter is not a pointer. Luckily all user has been removed, so
we can remove BITSET_ZERO too.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This removes the stackhog in process_free_queue by allocating the
necessary memory within the recycle thread main function instead
of the stack.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The bail out branch in case of a invalid tx_pos missed a semaphore
release. Dan Carpenter found this with a static checker.
Fixes: d1eab9dec6 ("staging: vchiq_core: Bail out in case of invalid tx_pos")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the checkpatch.pl warning:
WARNING: line over 80 characters
+ vbva = (void __force *)vbox->vbva_buffers + i *
VBVA_MIN_BUFFER_SIZE;
Signed-off-by: Daniel Junho <djunho@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove unnecessary braces {} around an 'if' statement block with a single
statement. Issue found by checkpatch.
Signed-off-by: Eyal Ilsar <edilsar@gmail.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some typos and grammar issues were found in the documentation. These
mistakes were fixed.
Signed-off-by: Shannon Booth <shannon.ml.booth@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
