[BUG]
If we have a btrfs image with dirty log, along with an unsupported RO
compatible flag:
log_root 30474240
...
compat_flags 0x0
compat_ro_flags 0x40000003
( FREE_SPACE_TREE |
FREE_SPACE_TREE_VALID |
unknown flag: 0x40000000 )
Then even if we can only mount it RO, we will still cause metadata
update for log replay:
BTRFS info (device dm-1): flagging fs with big metadata feature
BTRFS info (device dm-1): using free space tree
BTRFS info (device dm-1): has skinny extents
BTRFS info (device dm-1): start tree-log replay
This is definitely against RO compact flag requirement.
[CAUSE]
RO compact flag only forces us to do RO mount, but we will still do log
replay for plain RO mount.
Thus this will result us to do log replay and update metadata.
This can be very problematic for new RO compat flag, for example older
kernel can not understand v2 cache, and if we allow metadata update on
RO mount and invalidate/corrupt v2 cache.
[FIX]
Just reject the mount unless rescue=nologreplay is provided:
BTRFS error (device dm-1): cannot replay dirty log with unsupport optional features (0x40000000), try rescue=nologreplay instead
We don't want to set rescue=nologreply directly, as this would make the
end user to read the old data, and cause confusion.
Since the such case is really rare, we're mostly fine to just reject the
mount with an error message, which also includes the proper workaround.
CC: stable@vger.kernel.org #4.9+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When using "btrfs inspect-internal dump-super" to inspect an fs with
dirty log, it always shows the log_root_transid as 0:
log_root 30474240
log_root_transid 0 <<<
log_root_level 0
It turns out that, btrfs_super_block::log_root_transid is never really
utilized (even no read for it).
This can date back to the introduction of btrfs into upstream kernel.
In fact, when reading log tree root, we always use
btrfs_super_block::generation + 1 as the expected generation.
So here we're completely safe to mark this member deprecated.
In theory we can easily reuse this member for other purposes, but to be
extra safe, here we follow the leafsize way, by adding "__unused_" for
log_root_transid.
And we can safely remove the accessors, since there is no such callers
from the very beginning.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
submit_one_bio always works on the bio and compression flags from a
btrfs_bio_ctrl structure. Pass the explicitly and clean up the
calling conventions by handling a NULL bio in submit_one_bio, and
using the btrfs_bio_ctrl to pass the mirror number as well.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Merge end_write_bio and flush_write_bio into a single submit_write_bio
helper, that either submits the bio or ends it if a negative errno was
passed in. This consolidates a lot of duplicated checks in the callers.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
submit_one_bio is only used for page cache I/O, so the inode can be
trivially derived from the first page in the bio.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are two separate checks in the bounds checker, the first one being
a special case of the second. As this function is performance critical
due to checking access to any eb member, reducing the size can slightly
improve performance.
On a release build on x86_64 the helper is completely inlined so the
function call overhead is also gone.
There was a report of 5% performance drop on metadata heavy workload,
that disappeared after disabling asserts. The most significant part of
that is the bounds checker.
https://lore.kernel.org/linux-btrfs/20200724164147.39925-1-josef@toxicpanda.com/
After the analysis, the optimized code removes the worst overhead which
is the function call and the performance was restored.
https://lore.kernel.org/linux-btrfs/20200730110943.GE3703@twin.jikos.cz/
1. baseline, asserts on, setget check on
run time: 46s
run time with perf: 48s
2. asserts on, comment out setget check
run time: 44s
run time with perf: 47s
So this is confirms the 5% difference
3. asserts on, optimized seget check
run time: 44s
run time with perf: 47s
The optimizations are reducing the number of ifs to 1 and inlining the
hot path. Low-level stuff, gets the performance back. Patch below.
4. asserts off, no setget check
run time: 44s
run time with perf: 45s
This verifies that asserts other than the setget check have negligible
impact on performance and it's not harmful to keep them on.
Analysis where the performance is lost:
* check_setget_bounds is short function, but it's still a function call,
changing the flow of instructions and given how many times it's
called the overhead adds up
* there are two conditions, one to check if the range is
completely outside (member_offset > eb->len) or partially inside
(member_offset + size > eb->len)
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The use of kmap() is being deprecated in favor of kmap_local_page() where
it is feasible. With kmap_local_page(), the mapping is per thread, CPU
local and not globally visible.
Therefore, use kmap_local_page() / kunmap_local() in lzo.c wherever the
mappings are per thread and not globally visible.
Tested on QEMU + KVM 32 bits VM with 4GB of RAM and HIGHMEM64G enabled.
Suggested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The use of kmap() is being deprecated in favor of kmap_local_page() where
it is feasible. With kmap_local_page(), the mapping is per thread, CPU
local and not globally visible.
Therefore, use kmap_local_page() / kunmap_local() in inode.c wherever the
mappings are per thread and not globally visible.
Tested on QEMU + KVM 32 bits VM with 4GB of RAM and HIGHMEM64G enabled.
Suggested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The bios submitted from btrfs_map_bio don't really interact with the
rest of btrfs and the only btrfs_bio member actually used in the
low-level bios is the pointer to the btrfs_io_context used for endio
handler.
Use a union in struct btrfs_io_stripe that allows the endio handler to
find the btrfs_io_context and remove the spurious ->device assignment
so that a plain fs_bio_set bio can be used for the low-level bios
allocated inside btrfs_map_bio.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Move all per-stripe handling into submit_stripe_bio and use a label to
cleanup instead of duplicating the logic.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
All reads bio that go through btrfs_map_bio need to be completed in
user context. And read I/Os are the most common and timing critical
in almost any file system workloads.
Embed a work_struct into struct btrfs_bio and use it to complete all
read bios submitted through btrfs_map, using the REQ_META flag to decide
which workqueue they are placed on.
This removes the need for a separate 128 byte allocation (typically
rounded up to 192 bytes by slab) for all reads with a size increase
of 24 bytes for struct btrfs_bio. Future patches will reorganize
struct btrfs_bio to make use of this extra space for writes as well.
(All sizes are based a on typical 64-bit non-debug build)
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Set REQ_META in btrfs_submit_metadata_bio instead of the various callers.
We'll start relying on this flag inside of btrfs in a bit, and this
ensures it is always set correctly.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Compressed write bio completion is the only user of btrfs_bio_wq_end_io
for writes, and the use of btrfs_bio_wq_end_io is a little suboptimal
here as we only real need user context for the final completion of a
compressed_bio structure, and not every single bio completion.
Add a work_struct to struct compressed_bio instead and use that to call
finish_compressed_bio_write. This allows to remove all handling of
write bios in the btrfs_bio_wq_end_io infrastructure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
The bio completion handler of the bio used for the compressed data is
already run in a workqueue using btrfs_bio_wq_end_io, so don't schedule
the completion of the original bio to the same workqueue again but just
execute it directly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of attaching an extra allocation an indirect call to each
low-level bio issued by the RAID code, add a work_struct to struct
btrfs_raid_bio and only defer the per-rbio completion action. The
per-bio action for all the I/Os are trivial and can be safely done
from interrupt context.
As a nice side effect this also allows sharing the boilerplate code
for the per-bio completions
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Split btrfs_submit_data_bio into one helper for reads and one for writes.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There is no exit block and cleanup and the function is reasonably short
so we can use inline return and not the goto. This makes the function
more straight forward.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Assign ->mirror_num and ->bi_status in btrfs_end_bioc instead of
duplicating the logic in the callers. Also remove the bio argument as
it always must be bioc->orig_bio and the now pointless bioc_error that
did nothing but assign bi_sector to the same value just sampled in the
caller.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that the new support is implemented, allow the ioctl to accept v2
and the compressed flag, and update the version in sysfs.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that all of the pieces are in place, we can use the ENCODED_WRITE
command to send compressed extents when appropriate.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For encoded writes in send v2, we will get the encoded data with
btrfs_encoded_read_regular_fill_pages(), which expects a list of raw
pages. To avoid extra buffers and copies, we should read directly into
the send buffer. Therefore, we need the raw pages for the send buffer.
We currently allocate the send buffer with kvmalloc(), which may return
a kmalloc'd buffer or a vmalloc'd buffer. For vmalloc, we can get the
pages with vmalloc_to_page(). For kmalloc, we could use virt_to_page().
However, the buffer size we use (144K) is not a power of two, which in
theory is not guaranteed to return a page-aligned buffer, and in
practice would waste a lot of memory due to rounding up to the next
power of two. 144K is large enough that it usually gets allocated with
vmalloc(), anyways. So, for send v2, replace kvmalloc() with vmalloc()
and save the pages in an array.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The length field of the send stream TLV header is 16 bits. This means
that the maximum amount of data that can be sent for one write is 64K
minus one. However, encoded writes must be able to send the maximum
compressed extent (128K) in one command, or more. To support this, send
stream version 2 encodes the DATA attribute differently: it has no
length field, and the length is implicitly up to the end of containing
command (which has a 32bit length field). Although this is necessary
for encoded writes, normal writes can benefit from it, too.
Also add a check to enforce that the DATA attribute is last. It is only
strictly necessary for v2, but we might as well make v1 consistent with
it.
For v2, let's bump up the send buffer to the maximum compressed extent
size plus 16K for the other metadata (144K total). Since this will most
likely be vmalloc'd (and always will be after the next commit), we round
it up to the next page since we might as well use the rest of the page
on systems with >16K pages.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This adds the definitions of the new commands for send stream version 2
and their respective attributes: fallocate, FS_IOC_SETFLAGS (a.k.a.
chattr), and encoded writes. It also documents two changes to the send
stream format in v2: the receiver shouldn't assume a maximum command
size, and the DATA attribute is encoded differently to allow for writes
larger than 64k. These will be implemented in subsequent changes, and
then the ioctl will accept the new version and flag.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit e77fbf9903 ("btrfs: send: prepare for v2 protocol") added
_BTRFS_SEND_C_MAX_V* macros equal to the maximum command number for the
version plus 1, but as written this creates gaps in the number space.
The maximum command number is currently 22, and __BTRFS_SEND_C_MAX_V1 is
accordingly 23. But then __BTRFS_SEND_C_MAX_V2 is 24, suggesting that v2
has a command numbered 23, and __BTRFS_SEND_C_MAX is 25, suggesting that
23 and 24 are valid commands.
Instead, let's explicitly number all of the commands, attributes, and
sentinel MAX constants.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We collect these statistics but have never exposed them in any way. I
also didn't find any patches that ever attempted to make use of them.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Adds write-only trigger to force new chunk allocation for a given block
group type. It is at
/sys/fs/btrfs/<uuid>/allocation/<type>/force_chunk_alloc
Note: this is now only for debugging and testing and is enabled with the
CONFIG_BTRFS_DEBUG configuration option. The transaction is
started from sysfs context and can be problematic in some cases.
Signed-off-by: Stefan Roesch <shr@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ Changes from the original submission:
- update changelog
- drop unnecessary error messages
- switch value to bool and use kstrtobool
- move BTRFS_ATTR_W definition
- add comment for using transaction
]
Signed-off-by: David Sterba <dsterba@suse.com>
Add new sysfs knob
/sys/fs/btrfs/<uuid>/allocation/<type>/chunk_size.
This allows to query the chunk size and also set the chunk size.
Constraints:
- can be changed by root only
- system chunk size can't be set
- maximum chunk size is 10% of the filesystem size
- final value is rounded down to a multiple of 256M
- cannot be set on zoned filesystem
Note, that rounding and the 10% clamp will result to a different value
on filesystems smaller than 10G, typically 768M.
Signed-off-by: Stefan Roesch <shr@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ Changes to original submission:
- document setting constraints
- drop read-only requirement
- drop unnecessary error messages
- fix return values of _store callback
- use memparse for the value
- fix rounding down to 256M
]
Signed-off-by: David Sterba <dsterba@suse.com>
The chunk size is stored in the btrfs_space_info structure. It is
initialized at the start and is then used.
A new API is added to update the current chunk size. This API is used
to be able to expose the chunk_size as a sysfs setting.
Signed-off-by: Stefan Roesch <shr@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ rename and merge helpers, switch atomic type to u64, style fixes ]
Signed-off-by: David Sterba <dsterba@suse.com>
While running generic/475 in a loop I got the following error
BTRFS critical (device dm-11): corrupt leaf: root=5 block=31096832 slot=69, bad key order, prev (263 96 531) current (263 96 524)
<snip>
item 65 key (263 96 517) itemoff 14132 itemsize 33
item 66 key (263 96 523) itemoff 14099 itemsize 33
item 67 key (263 96 525) itemoff 14066 itemsize 33
item 68 key (263 96 531) itemoff 14033 itemsize 33
item 69 key (263 96 524) itemoff 14000 itemsize 33
As you can see here we have 3 dir index keys with the dir index value of
523, 524, and 525 inserted between 517 and 524. This occurs because our
dir index insertion code will bulk insert all dir index items on the
node regardless of their actual key value.
This makes sense on a normally running system, because if there's a gap
in between the items there was a deletion before the item was inserted,
so there's not going to be an overlap of the dir index items that need
to be inserted and what exists on disk.
However during log replay this isn't necessarily true, we could have any
number of dir indexes in the tree already.
Fix this by seeing if we're replaying the log, and if we are simply skip
batching if there's a gap in the key space.
This file system was left broken from the fstest, I tested this patch
against the broken fs to make sure it replayed the log properly, and
then btrfs checked the file system after the log replay to verify
everything was ok.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Whenever we want to create a new dir index item (when creating an inode,
create a hard link, rename a file) we reserve 1 unit of metadata space
for it in a transaction (that's 256K for a node/leaf size of 16K), and
then create a delayed insertion item for it to be added later to the
subvolume's tree. That unit of metadata is kept until the delayed item
is inserted into the subvolume tree, which may take a while to happen
(in the worst case, it's done only when the transaction commits). If we
have multiple dir index items to insert for the same directory, say N
index items, and they all fit in a single leaf of metadata, then we are
holding N units of reserved metadata space when all we need is 1 unit.
This change addresses that, whenever a new delayed dir index item is
added, we release the unit of metadata the caller has reserved when it
started the transaction if adding that new dir index item does not
result in touching one more metadata leaf, otherwise the reservation
is kept by transferring it from the transaction block reserve to the
delayed items block reserve, just like before. Given that with a leaf
size of 16K we can have a few hundred dir index items in a single leaf
(the exact value depends on file name lengths), this reduces pressure on
metadata reservation by releasing unnecessary space much sooner.
The following fs_mark test showed some improvement when creating many
files in parallel on machine running a non debug kernel (debian's default
kernel config) with 12 cores:
$ cat test.sh
#!/bin/bash
DEV=/dev/nvme0n1
MNT=/mnt/nvme0n1
MOUNT_OPTIONS="-o ssd"
FILES=100000
THREADS=$(nproc --all)
echo "performance" | \
tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor
mkfs.btrfs -f $DEV
mount $MOUNT_OPTIONS $DEV $MNT
OPTS="-S 0 -L 10 -n $FILES -s 0 -t $THREADS -k"
for ((i = 1; i <= $THREADS; i++)); do
OPTS="$OPTS -d $MNT/d$i"
done
fs_mark $OPTS
umount $MNT
Before:
FSUse% Count Size Files/sec App Overhead
2 1200000 0 225991.3 5465891
4 2400000 0 345728.1 5512106
4 3600000 0 346959.5 5557653
8 4800000 0 329643.0 5587548
8 6000000 0 312657.4 5606717
8 7200000 0 281707.5 5727985
12 8400000 0 88309.8 5020422
12 9600000 0 85835.9 5207496
16 10800000 0 81039.2 5404964
16 12000000 0 58548.6 5842468
After:
FSUse% Count Size Files/sec App Overhead
2 1200000 0 230604.5 5778375
4 2400000 0 348908.3 5508072
4 3600000 0 357028.7 5484337
6 4800000 0 342898.3 5565703
6 6000000 0 314670.8 5751555
8 7200000 0 282548.2 5778177
12 8400000 0 90844.9 5306819
12 9600000 0 86963.1 5304689
16 10800000 0 89113.2 5455248
16 12000000 0 86693.5 5518933
The "after" results are after applying this patch and all the other
patches in the same patchset, which is comprised of the following
changes:
btrfs: balance btree dirty pages and delayed items after a rename
btrfs: free the path earlier when creating a new inode
btrfs: balance btree dirty pages and delayed items after clone and dedupe
btrfs: add assertions when deleting batches of delayed items
btrfs: deal with deletion errors when deleting delayed items
btrfs: refactor the delayed item deletion entry point
btrfs: improve batch deletion of delayed dir index items
btrfs: assert that delayed item is a dir index item when adding it
btrfs: improve batch insertion of delayed dir index items
btrfs: do not BUG_ON() on failure to reserve metadata for delayed item
btrfs: set delayed item type when initializing it
btrfs: reduce amount of reserved metadata for delayed item insertion
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently we set the type of a delayed item only after successfully
inserting it into its respective rbtree. This is fine, as the type
is not used anywhere before that point, but for the next patch in the
series, there will be the need to check the type of a delayed item
before inserting it into a rbtree.
So set the type of a delayed item immediately after allocating it.
This also makes the trivial wrappers for adding insertion and deletion
useless, so it removes them as well.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At btrfs_insert_delayed_dir_index(), we don't expect the metadata
reservation for the delayed dir index item insertion to fail, because the
caller is supposed to have reserved 1 unit of metadata space for that.
All callers are able to deal with an error in case that happens, so there
is no need for something so drastic as a BUG_ON() in case of failure.
Instead just emit a warning, so that's easily noticed during development
(fstests in particular), and return the error to the caller.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently we group delayed dir index items for insertion as a single batch
(a single btree operation) as long as their keys are sequential in the key
space.
For example we have delayed index items for the following index keys:
10, 11, 12, 15, 16, 20, 21
We end up building three batches:
1) First one for index keys 10, 11 and 12;
2) Second one for index keys 15 and 16;
3) Third one for index keys 20 and 21.
However, since the dir index numbers come from a monotonically increasing
counter and are never reused, we could group all these items into a single
batch. The existence of holes in the sequence happens only when we had
delayed dir index items for insertion that got deleted before they were
flushed to the subvolume's tree.
The delayed items are stored in a rbtree based on their key order, so
we can just group items into a batch as long as they all fit in a leaf,
and ignore if there's a gap (key offset, index number) between two
consecutive items. This is more efficient and reduces the amount of
time spent when running delayed items if there are gaps between dir
index items.
For example running the following test script:
$ cat test.sh
#!/bin/bash
DEV=/dev/sdj
MNT=/mnt/sdj
mkfs.btrfs -f $DEV
mount $DEV $MNT
NUM_FILES=100
mkdir $MNT/testdir
for ((i = 1; i <= $NUM_FILES; i++)); do
echo -n > $MNT/testdir/file_$i
done
# Now delete every other file, to create gaps in the dir index keys.
for ((i = 1; i <= $NUM_FILES; i += 2)); do
rm -f $MNT/testdir/file_$i
done
start=$(date +%s%N)
sync
end=$(date +%s%N)
dur=$(( (end - start) / 1000000 ))
echo -e "\nsync took $dur milliseconds"
umount $MNT
While having the following bpftrace script running in another shell:
$ cat bpf-delayed-items-inserts.sh
#!/usr/bin/bpftrace
/* Must add 'noinline' to btrfs_insert_delayed_items(). */
k:btrfs_insert_delayed_items
{
@start_insert_delayed_items[tid] = nsecs;
}
k:btrfs_insert_empty_items
/@start_insert_delayed_items[tid]/
{
@insert_batches = count();
}
kr:btrfs_insert_delayed_items
/@start_insert_delayed_items[tid]/
{
$dur = (nsecs - @start_insert_delayed_items[tid]) / 1000;
@btrfs_insert_delayed_items_total_time = sum($dur);
delete(@start_insert_delayed_items[tid]);
}
Before this change:
@btrfs_insert_delayed_items_total_time: 576
@insert_batches: 51
After this change:
@btrfs_insert_delayed_items_total_time: 174
@insert_batches: 2
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
All delayed items are for dir index items, we don't support any other item
types at the moment. So simplify __btrfs_add_delayed_item() and add an
assertion for checking the item's key type. This also allows the next
change to be simpler and avoid to check key types. In case we add support
for different item types in the future, then we'll hit the assertion
during development and be able to adjust any code that is assuming delayed
items are always associated to dir index items.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently we group delayed dir index items for deletion in a single batch
(single btree operation) as long as they all exist in the same leaf and as
long as their keys are sequential in the key space. For example if we have
a leaf that has dir index items with offsets:
2, 3, 4, 6, 7, 10
And we have delayed dir index items for deleting all these indexes, and
no delayed items for any other index keys in between, then we end up
deleting in 3 batches:
1) First batch for indexes 2, 3 and 4;
2) Second batch for indexes 6 and 7;
3) Third batch for index 10.
This is a waste because we can delete all the index keys in a single
batch. What matters is that each consecutive delayed index key matches
each consecutive dir index key in a leaf.
So update the logic at btrfs_batch_delete_items() to check only for a
key match between delayed dir index items and dir index items in a leaf.
Also avoid the useless first iteration on comparing the key of the
first slot to delete with the key of the first delayed item, as it's
silly since they always match, as the delayed item's key was used for
the btree search that gave us the path we have.
This is more efficient and reduces runtime of running delayed items, as
well as lock contention on the subvolume's tree.
For example, the following test script:
$ cat test.sh
#!/bin/bash
DEV=/dev/sdj
MNT=/mnt/sdj
mkfs.btrfs -f $DEV
mount $DEV $MNT
NUM_FILES=1000
mkdir $MNT/testdir
for ((i = 1; i <= $NUM_FILES; i++)); do
echo -n > $MNT/testdir/file_$i
done
# Now delete every other file, to create gaps in the dir index keys.
for ((i = 1; i <= $NUM_FILES; i += 2)); do
rm -f $MNT/testdir/file_$i
done
# Sync to force any delayed items to be flushed to the tree.
sync
start=$(date +%s%N)
rm -fr $MNT/testdir
end=$(date +%s%N)
dur=$(( (end - start) / 1000000 ))
echo -e "\nrm -fr took $dur milliseconds"
umount $MNT
Running that test script while having the following bpftrace script
running in another shell:
$ cat bpf-measure.sh
#!/usr/bin/bpftrace
/* Add 'noinline' to btrfs_delete_delayed_items()'s definition. */
k:btrfs_delete_delayed_items
{
@start_delete_delayed_items[tid] = nsecs;
}
k:btrfs_del_items
/@start_delete_delayed_items[tid]/
{
@delete_batches = count();
}
kr:btrfs_delete_delayed_items
/@start_delete_delayed_items[tid]/
{
$dur = (nsecs - @start_delete_delayed_items[tid]) / 1000;
@btrfs_delete_delayed_items_total_time = sum($dur);
delete(@start_delete_delayed_items[tid]);
}
Before this change:
@btrfs_delete_delayed_items_total_time: 9563
@delete_batches: 1001
After this change:
@btrfs_delete_delayed_items_total_time: 7328
@delete_batches: 509
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The delayed item deletion entry point, btrfs_delete_delayed_items(), is a
bit convoluted for a few reasons:
1) It's really a loop disguised with labels and goto statements;
2) There's a 'delete_fail' label which isn't only for error cases, we can
jump to that label even if no error happened, if we simply don't have
more delayed items to delete;
3) Unnecessarily keeps track of the current and previous items for no
good reason, as after getting the next item and releasing the current
one, it just jumps to the 'again' label just to look again for the
first delayed item;
4) When a delayed item is not in the tree (because it was already deleted
before), it releases the item while holding a path locked, which is
not necessary and adds more contention to the tree, specially taking
into account that the path came from a deletion search, meaning we have
write locks for nodes at levels 2, 1 and 0. And releasing the item is
not computationally trivial (rb tree deletion, a kfree() and some
trivial things).
So refactor it to use a while loop and add some comments to make it more
obvious why we can have delayed items without a matching item in the tree
as well as why not keep the delayed node locked all the time when running
all its deletion items. This is also a preparation for some upcoming work
involving delayed items.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently, btrfs_delete_delayed_items() ignores any errors returned from
btrfs_batch_delete_items(). This looks fishy but it's not a problem at
the moment because:
1) Two of the errors returned from btrfs_batch_delete_items() are for
impossible cases, cases where a delayed item does not match any item
in the leaf the path points to - btrfs_delete_delayed_items() always
calls btrfs_batch_delete_items() with a path that points to a leaf
that contains an item matching a delayed item;
2) btrfs_batch_delete_items() may return an error from btrfs_del_items(),
in which case it does not release the delayed items of the batch.
At the moment this is harmless because btrfs_del_items() actually is
always able to delete items, even if it returns an error - when it
returns an error it's because it ended up with a leaf mostly empty
(less than 1/3 full) and failed to migrate items from that leaf into
its neighbour leaves - this is not critical, as all the items were
deleted, we just left the tree a bit unbalanced, but it's still a
valid tree and causes no harm, and future operations on the tree will
eventually balance it.
So even if we get an error from btrfs_del_items(), the delayed items
will not be released but the next time we run delayed items we will
find out, at btrfs_delete_delayed_items(), that they are not present
in the tree anymore and then release them.
This is all a bit subtle, and it's certainly prone to be a disaster in
case btrfs_del_items() changes one day and may return errors before being
able to delete all the requested items, in which case we could leave the
filesystem in an inconsistent state as we would commit a transaction
despite a failure from deleting items from the tree.
So make btrfs_delete_delayed_items() check for any errors from the call
to btrfs_batch_delete_items().
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are a few impossible cases that btrfs_batch_delete_items() tries to
deal with:
1) Getting a path pointing to a NULL leaf;
2) The leaf slot is pointing beyond the last item in the leaf;
3) We can't find a single item to delete.
The first case is impossible because the given path was returned by a
successful call to btrfs_search_slot(). Replace the BUG_ON() with an
ASSERT for this.
The second case is impossible because we are always called when a delayed
item matches an item in the given leaf. So add an ASSERT() for that and
if that condition is not satisfied, trigger a warning and return an error.
The third case is impossible exactly because of the same reason as the
second case. The given delayed item matches one item in the leaf, so we
know that our batch always has at least one item. Add an ASSERT to check
that, trigger a warning if that expectation fails and return an error.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When reflinking extents (clone and deduplication), we need to touch the
btree of the destination inode's subvolume, as well as potentially
create a delayed inode for the destination inode (if it was not created
before). However we are neither balancing the btree dirty pages nor the
delayed items after such operations, so if we have a task that is doing
a long series of clone or deduplication operations, it can result in
accumulation of too many btree dirty pages and delayed items.
So just call btrfs_btree_balance_dirty() after clone and deduplication,
just like we do for every other system call that results on modifying a
btree and adding delayed items.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When creating an inode, through btrfs_create_new_inode(), we release the
path we allocated before once we don't need it anymore. But we keep it
allocated until we return from that function, which is wasteful because
after we release the path we do several things that can allocate yet
another path: inheriting properties, setting the xattrs used by ACLs and
secutiry modules, adding an orphan item (O_TMPFILE case) or adding a
dir item (for the non-O_TMPFILE case).
So instead of releasing the path once we don't need it anymore, free it
instead. This way we avoid having two paths allocated until we return
from btrfs_create_new_inode().
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
A rename operation modifies a subvolume's btree, to remove the old dir
item, add the new dir item, remove an inode ref and add a new inode ref.
It can also create the delayed inode for the inodes involved in the
operation, and it creates two delayed dir index items, one to delete
the old name and another one to add the new name.
However we are neither balancing the btree dirty pages nor the delayed
items after a rename, which can result in accumulation of too many
btree dirty pages and delayed items, specially if a task is doing a
series of rename operations (for example it can happen for package
installations/upgrades through the zypper tool).
So just call btrfs_btree_balance_dirty() after a rename, just like we
do for every other system call that results on modifying a btree and
adding delayed items.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add tracepoint for better insight to how the RAID56 data are submitted.
The output looks like this: (trace event header and UUID skipped)
raid56_read_partial: full_stripe=389152768 devid=3 type=DATA1 offset=32768 opf=0x0 physical=323059712 len=32768
raid56_read_partial: full_stripe=389152768 devid=1 type=DATA2 offset=0 opf=0x0 physical=67174400 len=65536
raid56_write_stripe: full_stripe=389152768 devid=3 type=DATA1 offset=0 opf=0x1 physical=323026944 len=32768
raid56_write_stripe: full_stripe=389152768 devid=2 type=PQ1 offset=0 opf=0x1 physical=323026944 len=32768
The above debug output is from a 32K data write into an empty RAID56
data chunk.
Some explanation on the event output:
full_stripe: the logical bytenr of the full stripe
devid: btrfs devid
type: raid stripe type.
DATA1: the first data stripe
DATA2: the second data stripe
PQ1: the P stripe
PQ2: the Q stripe
offset: the offset inside the stripe.
opf: the bio op type
physical: the physical offset the bio is for
len: the length of the bio
The first two lines are from partial RMW read, which is reading the
remaining data stripes from disks.
The last two lines are for full stripe RMW write, which is writing the
involved two 16K stripes (one for DATA1 stripe, one for P stripe).
The stripe for DATA2 doesn't need to be written.
There are 5 types of trace events:
- raid56_read_partial
Read remaining data for regular read/write path.
- raid56_write_stripe
Write the modified stripes for regular read/write path.
- raid56_scrub_read_recover
Read remaining data for scrub recovery path.
- raid56_scrub_write_stripe
Write the modified stripes for scrub path.
- raid56_scrub_read
Read remaining data for scrub path.
Also, since the trace events are included at super.c, we have to export
needed structure definitions to 'raid56.h' and include the header in
super.c, or we're unable to access those members.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ reformat comments ]
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
With added debugging, it turns out the following write sequence would
cause extra read which is unnecessary:
# xfs_io -f -s -c "pwrite -b 32k 0 32k" -c "pwrite -b 32k 32k 32k" \
-c "pwrite -b 32k 64k 32k" -c "pwrite -b 32k 96k 32k" \
$mnt/file
The debug message looks like this (btrfs header skipped):
partial rmw, full stripe=389152768 opf=0x0 devid=3 type=1 offset=32768 physical=323059712 len=32768
partial rmw, full stripe=389152768 opf=0x0 devid=1 type=2 offset=0 physical=67174400 len=65536
full stripe rmw, full stripe=389152768 opf=0x1 devid=3 type=1 offset=0 physical=323026944 len=32768
full stripe rmw, full stripe=389152768 opf=0x1 devid=2 type=-1 offset=0 physical=323026944 len=32768
partial rmw, full stripe=298844160 opf=0x0 devid=1 type=1 offset=32768 physical=22052864 len=32768
partial rmw, full stripe=298844160 opf=0x0 devid=2 type=2 offset=0 physical=277872640 len=65536
full stripe rmw, full stripe=298844160 opf=0x1 devid=1 type=1 offset=0 physical=22020096 len=32768
full stripe rmw, full stripe=298844160 opf=0x1 devid=3 type=-1 offset=0 physical=277872640 len=32768
partial rmw, full stripe=389152768 opf=0x0 devid=3 type=1 offset=0 physical=323026944 len=32768
partial rmw, full stripe=389152768 opf=0x0 devid=1 type=2 offset=0 physical=67174400 len=65536
^^^^
Still partial read, even 389152768 is already cached by the first.
write.
full stripe rmw, full stripe=389152768 opf=0x1 devid=3 type=1 offset=32768 physical=323059712 len=32768
full stripe rmw, full stripe=389152768 opf=0x1 devid=2 type=-1 offset=32768 physical=323059712 len=32768
partial rmw, full stripe=298844160 opf=0x0 devid=1 type=1 offset=0 physical=22020096 len=32768
partial rmw, full stripe=298844160 opf=0x0 devid=2 type=2 offset=0 physical=277872640 len=65536
^^^^
Still partial read for 298844160.
full stripe rmw, full stripe=298844160 opf=0x1 devid=1 type=1 offset=32768 physical=22052864 len=32768
full stripe rmw, full stripe=298844160 opf=0x1 devid=3 type=-1 offset=32768 physical=277905408 len=32768
This means every 32K writes, even they are in the same full stripe,
still trigger read for previously cached data.
This would cause extra RAID56 IO, making the btrfs raid56 cache useless.
[CAUSE]
Commit d4e28d9b5f ("btrfs: raid56: make steal_rbio() subpage
compatible") tries to make steal_rbio() subpage compatible, but during
that conversion, there is one thing missing.
We no longer rely on PageUptodate(rbio->stripe_pages[i]), but
rbio->stripe_nsectors[i].uptodate to determine if a sector is uptodate.
This means, previously if we switch the pointer, everything is done,
as the PageUptodate flag is still bound to that page.
But now we have to manually mark the involved sectors uptodate, or later
raid56_rmw_stripe() will find the stolen sector is not uptodate, and
assemble the read bio for it, wasting IO.
[FIX]
We can easily fix the bug, by also update the
rbio->stripe_sectors[].uptodate in steal_rbio().
With this fixed, now the same write pattern no longer leads to the same
unnecessary read:
partial rmw, full stripe=389152768 opf=0x0 devid=3 type=1 offset=32768 physical=323059712 len=32768
partial rmw, full stripe=389152768 opf=0x0 devid=1 type=2 offset=0 physical=67174400 len=65536
full stripe rmw, full stripe=389152768 opf=0x1 devid=3 type=1 offset=0 physical=323026944 len=32768
full stripe rmw, full stripe=389152768 opf=0x1 devid=2 type=-1 offset=0 physical=323026944 len=32768
partial rmw, full stripe=298844160 opf=0x0 devid=1 type=1 offset=32768 physical=22052864 len=32768
partial rmw, full stripe=298844160 opf=0x0 devid=2 type=2 offset=0 physical=277872640 len=65536
full stripe rmw, full stripe=298844160 opf=0x1 devid=1 type=1 offset=0 physical=22020096 len=32768
full stripe rmw, full stripe=298844160 opf=0x1 devid=3 type=-1 offset=0 physical=277872640 len=32768
^^^ No more partial read, directly into the write path.
full stripe rmw, full stripe=389152768 opf=0x1 devid=3 type=1 offset=32768 physical=323059712 len=32768
full stripe rmw, full stripe=389152768 opf=0x1 devid=2 type=-1 offset=32768 physical=323059712 len=32768
full stripe rmw, full stripe=298844160 opf=0x1 devid=1 type=1 offset=32768 physical=22052864 len=32768
full stripe rmw, full stripe=298844160 opf=0x1 devid=3 type=-1 offset=32768 physical=277905408 len=32768
Fixes: d4e28d9b5f ("btrfs: raid56: make steal_rbio() subpage compatible")
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Both memzero_page and memcpy_to_page already call flush_dcache_page so
we can remove the calls from btrfs code.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
If we have only 8K partial write at the beginning of a full RAID56
stripe, we will write the following contents:
0 8K 32K 64K
Disk 1 (data): |XX| | |
Disk 2 (data): | | |
Disk 3 (parity): |XXXXXXXXXXXXXXX|XXXXXXXXXXXXXXX|
|X| means the sector will be written back to disk.
Note that, although we won't write any sectors from disk 2, but we will
write the full 64KiB of parity to disk.
This behavior is fine for now, but not for the future (especially for
RAID56J, as we waste quite some space to journal the unused parity
stripes).
So here we will also utilize the btrfs_raid_bio::dbitmap, anytime we
queue a higher level bio into an rbio, we will update rbio::dbitmap to
indicate which vertical stripes we need to writeback.
And at finish_rmw(), we also check dbitmap to see if we need to write
any sector in the vertical stripe.
So after the patch, above example will only lead to the following
writeback pattern:
0 8K 32K 64K
Disk 1 (data): |XX| | |
Disk 2 (data): | | |
Disk 3 (parity): |XX| | |
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Previously we use "unsigned long *" for those two bitmaps.
But since we only support fixed stripe length (64KiB, already checked in
tree-checker), "unsigned long *" is really a waste of memory, while we
can just use "unsigned long".
This saves us 8 bytes in total for scrub_parity.
To be extra safe, add an ASSERT() making sure calclulated @nsectors is
always smaller than BITS_PER_LONG.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Previsouly we use "unsigned long *" for those two bitmaps.
But since we only support fixed stripe length (64KiB, already checked in
tree-checker), "unsigned long *" is really a waste of memory, while we
can just use "unsigned long".
This saves us 8 bytes in total for btrfs_raid_bio.
To be extra safe, add an ASSERT() making sure calculated
@stripe_nsectors is always smaller than BITS_PER_LONG.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This eliminates 2 labels and makes the code generally more streamlined.
Also rename the 'out_bargs' label to 'out_unlock' since bargs is going
to be freed under the 'out' label. This also fixes a memory leak since
bargs wasn't correctly freed in one of the condition which are now moved
in btrfs_try_lock_balance.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function contains the factored out locking sequence of
btrfs_ioctl_balance. Having this piece of code separate helps to
simplify btrfs_ioctl_balance which has too complicated. This will be
used in the next patch to streamline the logic in btrfs_ioctl_balance.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use the new btrfs_bio_for_each_sector iterator to simplify
btrfs_check_read_dio_bio.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add a helper that works similar to __bio_for_each_segment, but instead of
iterating over PAGE_SIZE chunks it iterates over each sector.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
[hch: split from a larger patch, and iterate over the offset instead of
the offset bits]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add parameter comments ]
Signed-off-by: David Sterba <dsterba@suse.com>
Add a helper to find the csum for a byte offset into the csum buffer.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Untangle the goto and move the code it jumps to so it goes in the order
of the most likely states first.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
Add a helper to end I/O on a single sector, which will come in handy
with the new read repair code.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function submit_data_read_repair() is only called for buffered data
read path, thus those members can be calculated using bvec directly:
- start
start = page_offset(bvec->bv_page) + bvec->bv_offset;
- end
end = start + bvec->bv_len - 1;
- page
page = bvec->bv_page;
- pgoff
pgoff = bvec->bv_offset;
Thus we can safely replace those 4 parameters with just one bio_vec.
Also remove the unused return value.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
[hch: also remove the return value]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Although we have several data csum verification code, we never have a
function really just to verify checksum for one sector.
Function check_data_csum() do extra work for error reporting, thus it
requires a lot of extra things like file offset, bio_offset etc.
Function btrfs_verify_data_csum() is even worse, it will utilize page
checked flag, which means it can not be utilized for direct IO pages.
Here we introduce a new helper, btrfs_check_sector_csum(), which really
only accept a sector in page, and expected checksum pointer.
We use this function to implement check_data_csum(), and export it for
incoming patch.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
[hch: keep passing the csum array as an arguments, as the callers want
to print it, rename per request]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The following functions do special handling for RAID56 chunks:
- btrfs_is_parity_mirror()
Check if the range is in RAID56 chunks.
- btrfs_full_stripe_len()
Either return sectorsize for non-RAID56 profiles or full stripe length
for RAID56 chunks.
But if a filesystem without any RAID56 chunks, it will not have RAID56
incompat flags, and we can skip the chunk tree looking up completely.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The <linux/mm.h> already provides the PAGE_ALIGNED macro. Let's
use it instead of IS_ALIGNED and passing PAGE_SIZE directly.
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Fanjun Kong <bh1scw@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Fix the comment to represent the actual logic used for sb_write_pointer
- Empty[0] && In use[1] should be an invalid state instead of returning
zone 0 wp
- Empty[0] && Full[1] should be returning zone 0 wp instead of zone 1 wp
- In use[0] && Empty[1] should be returning zone 0 wp instead of being an
invalid state
- In use[0] && Full[1] should be returning zone 0 wp instead of returning
zone 1 wp
- Full[0] && Empty[1] should be returning zone 1 wp instead of returning
zone 0 wp
- Full[0] && In use[1] should be returning zone 1 wp instead of returning
zone 0 wp
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=lo96
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.19-2022-07-21' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"Fix for a bad kfree() introduced in this cycle, and a quick fix for
disabling buffer recycling for IORING_OP_READV.
The latter will get reworked for 5.20, but it gets the job done for
5.19"
* tag 'io_uring-5.19-2022-07-21' of git://git.kernel.dk/linux-block:
io_uring: do not recycle buffer in READV
io_uring: fix free of unallocated buffer list
READV cannot recycle buffers as it would lose some of the data required to
reimport that buffer.
Reported-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Fixes: b66e65f414 ("io_uring: never call io_buffer_select() for a buffer re-select")
Signed-off-by: Dylan Yudaken <dylany@fb.com>
Link: https://lore.kernel.org/r/20220721131325.624788-1-dylany@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=/47A
-----END PGP SIGNATURE-----
Merge tag 'for-5.19-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs reverts from David Sterba:
"Due to a recent report [1] we need to revert the radix tree to xarray
conversion patches.
There's a problem with sleeping under spinlock, when xa_insert could
allocate memory under pressure. We use GFP_NOFS so this is a real
problem that we unfortunately did not discover during review.
I'm sorry to do such change at rc6 time but the revert is IMO the
safer option, there are patches to use mutex instead of the spin locks
but that would need more testing. The revert branch has been tested on
a few setups, all seem ok.
The conversion to xarray will be revisited in the future"
Link: https://lore.kernel.org/linux-btrfs/cover.1657097693.git.fdmanana@suse.com/ [1]
* tag 'for-5.19-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Revert "btrfs: turn delayed_nodes_tree into an XArray"
Revert "btrfs: turn name_cache radix tree into XArray in send_ctx"
Revert "btrfs: turn fs_info member buffer_radix into XArray"
Revert "btrfs: turn fs_roots_radix in btrfs_fs_info into an XArray"
stable. Most of it is in netfs but I picked it up into ceph tree on
agreement with David.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAmLRle4THGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHziwNrB/wLIT7pDkZl2h1LclJS1WfgzgPkaOVq
sN8RO+QH3zIx5av/b3BH/R9Ilp2M4QjWr7f5y3emVZPxV9KQ2lrUj30XKecfIO4+
nGU3YunO+rfaUTyySJb06VFfhLpOjxjWGFEjgAO+exiWz4zl2h8dOXqYBTE/cStT
+721WZKYR25UK7c7kp/LgRC9QhjqH1MDm7wvPOAg6CR7mw2OiwjYD7o8Ou+zvGfp
6GimxbWouJNT+/xW2T3wIJsmQuwZbw4L4tsLSfhKTk57ooKtR1cdm0h/N7LM1bQa
fijU36LdGJGqKKF+kVJV73sNuPIZGY+KVS+ApiuOJ/LMDXxoeuiYtewT
=P3hf
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-5.19-rc7' of https://github.com/ceph/ceph-client
Pull ceph fix from Ilya Dryomov:
"A folio locking fixup that Xiubo and David cooperated on, marked for
stable. Most of it is in netfs but I picked it up into ceph tree on
agreement with David"
* tag 'ceph-for-5.19-rc7' of https://github.com/ceph/ceph-client:
netfs: do not unlock and put the folio twice
This reverts commit 253bf57555.
Revert the xarray conversion, there's a problem with potential
sleep-inside-spinlock [1] when calling xa_insert that triggers GFP_NOFS
allocation. The radix tree used the preloading mechanism to avoid
sleeping but this is not available in xarray.
Conversion from spin lock to mutex is possible but at time of rc6 is
riskier than a clean revert.
[1] https://lore.kernel.org/linux-btrfs/cover.1657097693.git.fdmanana@suse.com/
Reported-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This reverts commit 4076942021.
Revert the xarray conversion, there's a problem with potential
sleep-inside-spinlock [1] when calling xa_insert that triggers GFP_NOFS
allocation. The radix tree used the preloading mechanism to avoid
sleeping but this is not available in xarray.
Conversion from spin lock to mutex is possible but at time of rc6 is
riskier than a clean revert.
[1] https://lore.kernel.org/linux-btrfs/cover.1657097693.git.fdmanana@suse.com/
Reported-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This reverts commit 8ee922689d.
Revert the xarray conversion, there's a problem with potential
sleep-inside-spinlock [1] when calling xa_insert that triggers GFP_NOFS
allocation. The radix tree used the preloading mechanism to avoid
sleeping but this is not available in xarray.
Conversion from spin lock to mutex is possible but at time of rc6 is
riskier than a clean revert.
[1] https://lore.kernel.org/linux-btrfs/cover.1657097693.git.fdmanana@suse.com/
Reported-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This reverts commit 48b36a602a.
Revert the xarray conversion, there's a problem with potential
sleep-inside-spinlock [1] when calling xa_insert that triggers GFP_NOFS
allocation. The radix tree used the preloading mechanism to avoid
sleeping but this is not available in xarray.
Conversion from spin lock to mutex is possible but at time of rc6 is
riskier than a clean revert.
[1] https://lore.kernel.org/linux-btrfs/cover.1657097693.git.fdmanana@suse.com/
Reported-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This reverts commit 4a57a84000.
Dave Chinner reports:
"As I suspected would occur, this change causes test failures. e.g
generic/517 in fstests fails with:
generic/517 1s ... - output mismatch [..]
-deduped 131172/131172 bytes at offset 65536
+deduped 131072/131172 bytes at offset 65536"
can you please revert this commit for the 5.19 series to give us more
time to investigate and consider the impact of the the API change on
userspace applications before we commit to changing the API"
That changed return value seems to reflect reality, but with the fstest
change, let's revert for now.
Requested-by: Dave Chinner <david@fromorbit.com>
Link: https://lore.kernel.org/all/20220714223238.GH3600936@dread.disaster.area/
Cc: Ansgar Lößer <ansgar.loesser@tu-darmstadt.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=FxnJ
-----END PGP SIGNATURE-----
Merge tag '5.19-rc6-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Three smb3 client fixes:
- two multichannel fixes: fix a potential deadlock freeing a channel,
and fix a race condition on failed creation of a new channel
- mount failure fix: work around a server bug in some common older
Samba servers by avoiding padding at the end of the negotiate
protocol request"
* tag '5.19-rc6-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb3: workaround negprot bug in some Samba servers
cifs: remove unnecessary locking of chan_lock while freeing session
cifs: fix race condition with delayed threads
- Enable SETATTR(time_create) to fix regression with Mac OS clients
- Fix a lockd crasher and broken NLM UNLCK behavior
-----BEGIN PGP SIGNATURE-----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=T8gK
-----END PGP SIGNATURE-----
Merge tag 'nfsd-5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
"Notable regression fixes:
- Enable SETATTR(time_create) to fix regression with Mac OS clients
- Fix a lockd crasher and broken NLM UNLCK behavior"
* tag 'nfsd-5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
lockd: fix nlm_close_files
lockd: set fl_owner when unlocking files
NFSD: Decode NFSv4 birth time attribute
check_write_begin() will unlock and put the folio when return
non-zero. So we should avoid unlocking and putting it twice in
netfs layer.
Change the way ->check_write_begin() works in the following two ways:
(1) Pass it a pointer to the folio pointer, allowing it to unlock and put
the folio prior to doing the stuff it wants to do, provided it clears
the folio pointer.
(2) Change the return values such that 0 with folio pointer set means
continue, 0 with folio pointer cleared means re-get and all error
codes indicating an error (no special treatment for -EAGAIN).
[ bagasdotme: use Sphinx code text syntax for *foliop pointer ]
Cc: stable@vger.kernel.org
Link: https://tracker.ceph.com/issues/56423
Link: https://lore.kernel.org/r/cf169f43-8ee7-8697-25da-0204d1b4343e@redhat.com
Co-developed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Mount can now fail to older Samba servers due to a server
bug handling padding at the end of the last negotiate
context (negotiate contexts typically are rounded up to 8
bytes by adding padding if needed). This server bug can
be avoided by switching the order of negotiate contexts,
placing a negotiate context at the end that does not
require padding (prior to the recent netname context fix
this was the case on the client).
Fixes: 73130a7b1a ("smb3: fix empty netname context on secondary channels")
Reported-by: Julian Sikorski <belegdol@gmail.com>
Tested-by: Julian Sikorski <belegdol+github@gmail.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When using the FIDEDUPRANGE ioctl, in case of success the requested size
is returned. In some cases this might not be the actual amount of bytes
deduplicated.
This change modifies vfs_dedupe_file_range() to report the actual amount
of bytes deduplicated, instead of the requested amount.
Link: https://lore.kernel.org/linux-fsdevel/5548ef63-62f9-4f46-5793-03165ceccacc@tu-darmstadt.de/
Reported-by: Ansgar Lößer <ansgar.loesser@kom.tu-darmstadt.de>
Reported-by: Max Schlecht <max.schlecht@informatik.hu-berlin.de>
Reported-by: Björn Scheuermann <scheuermann@kom.tu-darmstadt.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Darrick J Wong <djwong@kernel.org>
Signed-off-by: Ansgar Lößer <ansgar.loesser@kom.tu-darmstadt.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If dedupe of an EOF block is not constrainted to match against only
other EOF blocks with the same EOF offset into the block, it can
match against any other block that has the same matching initial
bytes in it, even if the bytes beyond EOF in the source file do
not match.
Fix this by constraining the EOF block matching to only match
against other EOF blocks that have identical EOF offsets and data.
This allows "whole file dedupe" to continue to work without allowing
eof blocks to randomly match against partial full blocks with the
same data.
Reported-by: Ansgar Lößer <ansgar.loesser@tu-darmstadt.de>
Fixes: 1383a7ed67 ("vfs: check file ranges before cloning files")
Link: https://lore.kernel.org/linux-fsdevel/a7c93559-4ba1-df2f-7a85-55a143696405@tu-darmstadt.de/
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCYs11GgAKCRDh3BK/laaZ
PAD3APsHu08aHid5O/zPnD/90BNqAo3ruvu2WhI5wa8Dacd5SwEAgoSlH2Tx3iy9
4zWK4zZX98qAGyI+ij5aejc0TvONqAE=
=4KjV
-----END PGP SIGNATURE-----
Merge tag 'ovl-fixes-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs fix from Miklos Szeredi:
"Add a temporary fix for posix acls on idmapped mounts introduced in
this cycle. A proper fix will be added in the next cycle"
* tag 'ovl-fixes-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: turn off SB_POSIXACL with idmapped layers temporarily
In cifs_put_smb_ses, when we're freeing the last ref count to
the session, we need to free up each channel. At this point,
it is unnecessary to take chan_lock, since we have the last
reference to the ses.
Picking up this lock also introduced a deadlock because it calls
cifs_put_tcp_ses, which locks cifs_tcp_ses_lock.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Acked-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
On failure to create a new channel, first cancel the
delayed threads, which could try to search for this
channel, and not find it.
The other option was to put the tcp session for the
channel first, before decrementing chan_count. But
that would leave a reference to the tcp session, when
it has been freed already.
So going with the former option and cancelling the
delayed works first, before rolling back the channel.
Fixes: aa45dadd34 ("cifs: change iface_list from array to sorted linked list")
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Acked-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
-----BEGIN PGP SIGNATURE-----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=Cxvn
-----END PGP SIGNATURE-----
Merge tag 'for-5.19-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A more fixes that seem to me to be important enough to get merged
before release:
- in zoned mode, fix leak of a structure when reading zone info, this
happens on normal path so this can be significant
- in zoned mode, revert an optimization added in 5.19-rc1 to finish a
zone when the capacity is full, but this is not reliable in all
cases
- try to avoid short reads for compressed data or inline files when
it's a NOWAIT read, applications should handle that but there are
two, qemu and mariadb, that are affected"
* tag 'for-5.19-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: zoned: drop optimization of zone finish
btrfs: zoned: fix a leaked bioc in read_zone_info
btrfs: return -EAGAIN for NOWAIT dio reads/writes on compressed and inline extents
This loop condition tries a bit too hard to be clever. Just test for
the two indices we care about explicitly.
Cc: J. Bruce Fields <bfields@fieldses.org>
Fixes: 7f024fcd5c ("Keep read and write fds with each nlm_file")
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
and the remainder for longer-term issues.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYsxt9wAKCRDdBJ7gKXxA
jnjWAQD6ts4tgsX+hQ5lrZjWRvYIxH/I4jbtxyMyhc+iKarotAD+NILVgrzIvr0v
ijlA4LLtmdhN1UWdSomUm3bZVn6n+QA=
=1375
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2022-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"Mainly MM fixes. About half for issues which were introduced after
5.18 and the remainder for longer-term issues"
* tag 'mm-hotfixes-stable-2022-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: split huge PUD on wp_huge_pud fallback
nilfs2: fix incorrect masking of permission flags for symlinks
mm/rmap: fix dereferencing invalid subpage pointer in try_to_migrate_one()
riscv/mm: fix build error while PAGE_TABLE_CHECK enabled without MMU
Documentation: highmem: use literal block for code example in highmem.h comment
mm: sparsemem: fix missing higher order allocation splitting
mm/damon: use set_huge_pte_at() to make huge pte old
sh: convert nommu io{re,un}map() to static inline functions
mm: userfaultfd: fix UFFDIO_CONTINUE on fallocated shmem pages
Unlocking a POSIX lock on an inode with vfs_lock_file only works if
the owner matches. Ensure we set it in the request.
Cc: J. Bruce Fields <bfields@fieldses.org>
Fixes: 7f024fcd5c ("Keep read and write fds with each nlm_file")
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
NFSD has advertised support for the NFSv4 time_create attribute
since commit e377a3e698 ("nfsd: Add support for the birth time
attribute").
Igor Mammedov reports that Mac OS clients attempt to set the NFSv4
birth time attribute via OPEN(CREATE) and SETATTR if the server
indicates that it supports it, but since the above commit was
merged, those attempts now fail.
Table 5 in RFC 8881 lists the time_create attribute as one that can
be both set and retrieved, but the above commit did not add server
support for clients to provide a time_create attribute. IMO that's
a bug in our implementation of the NFSv4 protocol, which this commit
addresses.
Whether NFSD silently ignores the new birth time or actually sets it
is another matter. I haven't found another filesystem service in the
Linux kernel that enables users or clients to modify a file's birth
time attribute.
This commit reflects my (perhaps incorrect) understanding of whether
Linux users can set a file's birth time. NFSD will now recognize a
time_create attribute but it ignores its value. It clears the
time_create bit in the returned attribute bitmask to indicate that
the value was not used.
Reported-by: Igor Mammedov <imammedo@redhat.com>
Fixes: e377a3e698 ("nfsd: Add support for the birth time attribute")
Tested-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
As Chris explains, the comment above exit_itimers() is not correct,
we can race with proc_timers_seq_ops. Change exit_itimers() to clear
signal->posix_timers with ->siglock held.
Cc: <stable@vger.kernel.org>
Reported-by: chris@accessvector.net
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=ZK3Q
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.19-2022-07-09' of git://git.kernel.dk/linux-block
Pull io_uring fix from Jens Axboe:
"A single fix for an issue that came up yesterday that we should plug
for -rc6.
This is a regression introduced in this cycle"
* tag 'io_uring-5.19-2022-07-09' of git://git.kernel.dk/linux-block:
io_uring: check that we have a file table when allocating update slots
If IORING_FILE_INDEX_ALLOC is set asking for an allocated slot, the
helper doesn't check if we actually have a file table or not. The non
alloc path does do that correctly, and returns -ENXIO if we haven't set
one up.
Do the same for the allocated path, avoiding a NULL pointer dereference
when trying to find a free bit.
Fixes: a7c41b4687 ("io_uring: let IORING_OP_FILES_UPDATE support choosing fixed file slots")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=FDkz
-----END PGP SIGNATURE-----
Merge tag 'fscache-fixes-20220708' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull fscache fixes from David Howells:
- Fix a check in fscache_wait_on_volume_collision() in which the
polarity is reversed. It should complain if a volume is still marked
acquisition-pending after 20s, but instead complains if the mark has
been cleared (ie. the condition has cleared).
Also switch an open-coded test of the ACQUIRE_PENDING volume flag to
use the helper function for consistency.
- Not a fix per se, but neaten the code by using a helper to check for
the DROPPED state.
- Fix cachefiles's support for erofs to only flush requests associated
with a released control file, not all requests.
- Fix a race between one process invalidating an object in the cache
and another process trying to look it up.
* tag 'fscache-fixes-20220708' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
fscache: Fix invalidation/lookup race
cachefiles: narrow the scope of flushed requests when releasing fd
fscache: Introduce fscache_cookie_is_dropped()
fscache: Fix if condition in fscache_wait_on_volume_collision()
-----BEGIN PGP SIGNATURE-----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=w3SQ
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.19-2022-07-08' of git://git.kernel.dk/linux-block
Pull io_uring tweak from Jens Axboe:
"Just a minor tweak to an addition made in this release cycle: padding
a 32-bit value that's in a 64-bit union to avoid any potential
funkiness from that"
* tag 'io_uring-5.19-2022-07-08' of git://git.kernel.dk/linux-block:
io_uring: explicit sqe padding for ioctl commands
We have an optimization in do_zone_finish() to send REQ_OP_ZONE_FINISH only
when necessary, i.e. we don't send REQ_OP_ZONE_FINISH when we assume we
wrote fully into the zone.
The assumption is determined by "alloc_offset == capacity". This condition
won't work if the last ordered extent is canceled due to some errors. In
that case, we consider the zone is deactivated without sending the finish
command while it's still active.
This inconstancy results in activating another block group while we cannot
really activate the underlying zone, which causes the active zone exceeds
errors like below.
BTRFS error (device nvme3n2): allocation failed flags 1, wanted 520192 tree-log 0, relocation: 0
nvme3n2: I/O Cmd(0x7d) @ LBA 160432128, 127 blocks, I/O Error (sct 0x1 / sc 0xbd) MORE DNR
active zones exceeded error, dev nvme3n2, sector 0 op 0xd:(ZONE_APPEND) flags 0x4800 phys_seg 1 prio class 0
nvme3n2: I/O Cmd(0x7d) @ LBA 160432128, 127 blocks, I/O Error (sct 0x1 / sc 0xbd) MORE DNR
active zones exceeded error, dev nvme3n2, sector 0 op 0xd:(ZONE_APPEND) flags 0x4800 phys_seg 1 prio class 0
Fix the issue by removing the optimization for now.
Fixes: 8376d9e1ed ("btrfs: zoned: finish superblock zone once no space left for new SB")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The bioc would leak on the normal completion path and also on the RAID56
check (but that one won't happen in practice due to the invalid
combination with zoned mode).
Fixes: 7db1c5d14d ("btrfs: zoned: support dev-replace in zoned filesystems")
CC: stable@vger.kernel.org # 5.16+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
[ update changelog ]
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When doing a direct IO read or write, we always return -ENOTBLK when we
find a compressed extent (or an inline extent) so that we fallback to
buffered IO. This however is not ideal in case we are in a NOWAIT context
(io_uring for example), because buffered IO can block and we currently
have no support for NOWAIT semantics for buffered IO, so if we need to
fallback to buffered IO we should first signal the caller that we may
need to block by returning -EAGAIN instead.
This behaviour can also result in short reads being returned to user
space, which although it's not incorrect and user space should be able
to deal with partial reads, it's somewhat surprising and even some popular
applications like QEMU (Link tag #1) and MariaDB (Link tag #2) don't
deal with short reads properly (or at all).
The short read case happens when we try to read from a range that has a
non-compressed and non-inline extent followed by a compressed extent.
After having read the first extent, when we find the compressed extent we
return -ENOTBLK from btrfs_dio_iomap_begin(), which results in iomap to
treat the request as a short read, returning 0 (success) and waiting for
previously submitted bios to complete (this happens at
fs/iomap/direct-io.c:__iomap_dio_rw()). After that, and while at
btrfs_file_read_iter(), we call filemap_read() to use buffered IO to
read the remaining data, and pass it the number of bytes we were able to
read with direct IO. Than at filemap_read() if we get a page fault error
when accessing the read buffer, we return a partial read instead of an
-EFAULT error, because the number of bytes previously read is greater
than zero.
So fix this by returning -EAGAIN for NOWAIT direct IO when we find a
compressed or an inline extent.
Reported-by: Dominique MARTINET <dominique.martinet@atmark-techno.com>
Link: https://lore.kernel.org/linux-btrfs/YrrFGO4A1jS0GI0G@atmark-techno.com/
Link: https://jira.mariadb.org/browse/MDEV-27900?focusedCommentId=216582&page=com.atlassian.jira.plugin.system.issuetabpanels%3Acomment-tabpanel#comment-216582
Tested-by: Dominique MARTINET <dominique.martinet@atmark-techno.com>
CC: stable@vger.kernel.org # 5.10+
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This cycle we added support for mounting overlayfs on top of idmapped
mounts. Recently I've started looking into potential corner cases when
trying to add additional tests and I noticed that reporting for POSIX ACLs
is currently wrong when using idmapped layers with overlayfs mounted on top
of it.
I have sent out an patch that fixes this and makes POSIX ACLs work
correctly but the patch is a bit bigger and we're already at -rc5 so I
recommend we simply don't raise SB_POSIXACL when idmapped layers are
used. Then we can fix the VFS part described below for the next merge
window so we can have good exposure in -next.
I'm going to give a rather detailed explanation to both the origin of the
problem and mention the solution so people know what's going on.
Let's assume the user creates the following directory layout and they have
a rootfs /var/lib/lxc/c1/rootfs. The files in this rootfs are owned as you
would expect files on your host system to be owned. For example, ~/.bashrc
for your regular user would be owned by 1000:1000 and /root/.bashrc would
be owned by 0:0. IOW, this is just regular boring filesystem tree on an
ext4 or xfs filesystem.
The user chooses to set POSIX ACLs using the setfacl binary granting the
user with uid 4 read, write, and execute permissions for their .bashrc
file:
setfacl -m u:4:rwx /var/lib/lxc/c2/rootfs/home/ubuntu/.bashrc
Now they to expose the whole rootfs to a container using an idmapped
mount. So they first create:
mkdir -pv /vol/contpool/{ctrover,merge,lowermap,overmap}
mkdir -pv /vol/contpool/ctrover/{over,work}
chown 10000000:10000000 /vol/contpool/ctrover/{over,work}
The user now creates an idmapped mount for the rootfs:
mount-idmapped/mount-idmapped --map-mount=b:0:10000000:65536 \
/var/lib/lxc/c2/rootfs \
/vol/contpool/lowermap
This for example makes it so that
/var/lib/lxc/c2/rootfs/home/ubuntu/.bashrc which is owned by uid and gid
1000 as being owned by uid and gid 10001000 at
/vol/contpool/lowermap/home/ubuntu/.bashrc.
Assume the user wants to expose these idmapped mounts through an overlayfs
mount to a container.
mount -t overlay overlay \
-o lowerdir=/vol/contpool/lowermap, \
upperdir=/vol/contpool/overmap/over, \
workdir=/vol/contpool/overmap/work \
/vol/contpool/merge
The user can do this in two ways:
(1) Mount overlayfs in the initial user namespace and expose it to the
container.
(2) Mount overlayfs on top of the idmapped mounts inside of the container's
user namespace.
Let's assume the user chooses the (1) option and mounts overlayfs on the
host and then changes into a container which uses the idmapping
0:10000000:65536 which is the same used for the two idmapped mounts.
Now the user tries to retrieve the POSIX ACLs using the getfacl command
getfacl -n /vol/contpool/lowermap/home/ubuntu/.bashrc
and to their surprise they see:
# file: vol/contpool/merge/home/ubuntu/.bashrc
# owner: 1000
# group: 1000
user::rw-
user:4294967295:rwx
group::r--
mask::rwx
other::r--
indicating the uid wasn't correctly translated according to the idmapped
mount. The problem is how we currently translate POSIX ACLs. Let's inspect
the callchain in this example:
idmapped mount /vol/contpool/merge: 0:10000000:65536
caller's idmapping: 0:10000000:65536
overlayfs idmapping (ofs->creator_cred): 0:0:4k /* initial idmapping */
sys_getxattr()
-> path_getxattr()
-> getxattr()
-> do_getxattr()
|> vfs_getxattr()
| -> __vfs_getxattr()
| -> handler->get == ovl_posix_acl_xattr_get()
| -> ovl_xattr_get()
| -> vfs_getxattr()
| -> __vfs_getxattr()
| -> handler->get() /* lower filesystem callback */
|> posix_acl_fix_xattr_to_user()
{
4 = make_kuid(&init_user_ns, 4);
4 = mapped_kuid_fs(&init_user_ns /* no idmapped mount */, 4);
/* FAILURE */
-1 = from_kuid(0:10000000:65536 /* caller's idmapping */, 4);
}
If the user chooses to use option (2) and mounts overlayfs on top of
idmapped mounts inside the container things don't look that much better:
idmapped mount /vol/contpool/merge: 0:10000000:65536
caller's idmapping: 0:10000000:65536
overlayfs idmapping (ofs->creator_cred): 0:10000000:65536
sys_getxattr()
-> path_getxattr()
-> getxattr()
-> do_getxattr()
|> vfs_getxattr()
| -> __vfs_getxattr()
| -> handler->get == ovl_posix_acl_xattr_get()
| -> ovl_xattr_get()
| -> vfs_getxattr()
| -> __vfs_getxattr()
| -> handler->get() /* lower filesystem callback */
|> posix_acl_fix_xattr_to_user()
{
4 = make_kuid(&init_user_ns, 4);
4 = mapped_kuid_fs(&init_user_ns, 4);
/* FAILURE */
-1 = from_kuid(0:10000000:65536 /* caller's idmapping */, 4);
}
As is easily seen the problem arises because the idmapping of the lower
mount isn't taken into account as all of this happens in do_gexattr(). But
do_getxattr() is always called on an overlayfs mount and inode and thus
cannot possible take the idmapping of the lower layers into account.
This problem is similar for fscaps but there the translation happens as
part of vfs_getxattr() already. Let's walk through an fscaps overlayfs
callchain:
setcap 'cap_net_raw+ep' /var/lib/lxc/c2/rootfs/home/ubuntu/.bashrc
The expected outcome here is that we'll receive the cap_net_raw capability
as we are able to map the uid associated with the fscap to 0 within our
container. IOW, we want to see 0 as the result of the idmapping
translations.
If the user chooses option (1) we get the following callchain for fscaps:
idmapped mount /vol/contpool/merge: 0:10000000:65536
caller's idmapping: 0:10000000:65536
overlayfs idmapping (ofs->creator_cred): 0:0:4k /* initial idmapping */
sys_getxattr()
-> path_getxattr()
-> getxattr()
-> do_getxattr()
-> vfs_getxattr()
-> xattr_getsecurity()
-> security_inode_getsecurity() ________________________________
-> cap_inode_getsecurity() | |
{ V |
10000000 = make_kuid(0:0:4k /* overlayfs idmapping */, 10000000); |
10000000 = mapped_kuid_fs(0:0:4k /* no idmapped mount */, 10000000); |
/* Expected result is 0 and thus that we own the fscap. */ |
0 = from_kuid(0:10000000:65536 /* caller's idmapping */, 10000000); |
} |
-> vfs_getxattr_alloc() |
-> handler->get == ovl_other_xattr_get() |
-> vfs_getxattr() |
-> xattr_getsecurity() |
-> security_inode_getsecurity() |
-> cap_inode_getsecurity() |
{ |
0 = make_kuid(0:0:4k /* lower s_user_ns */, 0); |
10000000 = mapped_kuid_fs(0:10000000:65536 /* idmapped mount */, 0); |
10000000 = from_kuid(0:0:4k /* overlayfs idmapping */, 10000000); |
|____________________________________________________________________|
}
-> vfs_getxattr_alloc()
-> handler->get == /* lower filesystem callback */
And if the user chooses option (2) we get:
idmapped mount /vol/contpool/merge: 0:10000000:65536
caller's idmapping: 0:10000000:65536
overlayfs idmapping (ofs->creator_cred): 0:10000000:65536
sys_getxattr()
-> path_getxattr()
-> getxattr()
-> do_getxattr()
-> vfs_getxattr()
-> xattr_getsecurity()
-> security_inode_getsecurity() _______________________________
-> cap_inode_getsecurity() | |
{ V |
10000000 = make_kuid(0:10000000:65536 /* overlayfs idmapping */, 0); |
10000000 = mapped_kuid_fs(0:0:4k /* no idmapped mount */, 10000000); |
/* Expected result is 0 and thus that we own the fscap. */ |
0 = from_kuid(0:10000000:65536 /* caller's idmapping */, 10000000); |
} |
-> vfs_getxattr_alloc() |
-> handler->get == ovl_other_xattr_get() |
|-> vfs_getxattr() |
-> xattr_getsecurity() |
-> security_inode_getsecurity() |
-> cap_inode_getsecurity() |
{ |
0 = make_kuid(0:0:4k /* lower s_user_ns */, 0); |
10000000 = mapped_kuid_fs(0:10000000:65536 /* idmapped mount */, 0); |
0 = from_kuid(0:10000000:65536 /* overlayfs idmapping */, 10000000); |
|____________________________________________________________________|
}
-> vfs_getxattr_alloc()
-> handler->get == /* lower filesystem callback */
We can see how the translation happens correctly in those cases as the
conversion happens within the vfs_getxattr() helper.
For POSIX ACLs we need to do something similar. However, in contrast to
fscaps we cannot apply the fix directly to the kernel internal posix acl
data structure as this would alter the cached values and would also require
a rework of how we currently deal with POSIX ACLs in general which almost
never take the filesystem idmapping into account (the noteable exception
being FUSE but even there the implementation is special) and instead
retrieve the raw values based on the initial idmapping.
The correct values are then generated right before returning to
userspace. The fix for this is to move taking the mount's idmapping into
account directly in vfs_getxattr() instead of having it be part of
posix_acl_fix_xattr_to_user().
To this end we simply move the idmapped mount translation into a separate
step performed in vfs_{g,s}etxattr() instead of in
posix_acl_fix_xattr_{from,to}_user().
To see how this fixes things let's go back to the original example. Assume
the user chose option (1) and mounted overlayfs on top of idmapped mounts
on the host:
idmapped mount /vol/contpool/merge: 0:10000000:65536
caller's idmapping: 0:10000000:65536
overlayfs idmapping (ofs->creator_cred): 0:0:4k /* initial idmapping */
sys_getxattr()
-> path_getxattr()
-> getxattr()
-> do_getxattr()
|> vfs_getxattr()
| |> __vfs_getxattr()
| | -> handler->get == ovl_posix_acl_xattr_get()
| | -> ovl_xattr_get()
| | -> vfs_getxattr()
| | |> __vfs_getxattr()
| | | -> handler->get() /* lower filesystem callback */
| | |> posix_acl_getxattr_idmapped_mnt()
| | {
| | 4 = make_kuid(&init_user_ns, 4);
| | 10000004 = mapped_kuid_fs(0:10000000:65536 /* lower idmapped mount */, 4);
| | 10000004 = from_kuid(&init_user_ns, 10000004);
| | |_______________________
| | } |
| | |
| |> posix_acl_getxattr_idmapped_mnt() |
| { |
| V
| 10000004 = make_kuid(&init_user_ns, 10000004);
| 10000004 = mapped_kuid_fs(&init_user_ns /* no idmapped mount */, 10000004);
| 10000004 = from_kuid(&init_user_ns, 10000004);
| } |_________________________________________________
| |
| |
|> posix_acl_fix_xattr_to_user() |
{ V
10000004 = make_kuid(0:0:4k /* init_user_ns */, 10000004);
/* SUCCESS */
4 = from_kuid(0:10000000:65536 /* caller's idmapping */, 10000004);
}
And similarly if the user chooses option (1) and mounted overayfs on top of
idmapped mounts inside the container:
idmapped mount /vol/contpool/merge: 0:10000000:65536
caller's idmapping: 0:10000000:65536
overlayfs idmapping (ofs->creator_cred): 0:10000000:65536
sys_getxattr()
-> path_getxattr()
-> getxattr()
-> do_getxattr()
|> vfs_getxattr()
| |> __vfs_getxattr()
| | -> handler->get == ovl_posix_acl_xattr_get()
| | -> ovl_xattr_get()
| | -> vfs_getxattr()
| | |> __vfs_getxattr()
| | | -> handler->get() /* lower filesystem callback */
| | |> posix_acl_getxattr_idmapped_mnt()
| | {
| | 4 = make_kuid(&init_user_ns, 4);
| | 10000004 = mapped_kuid_fs(0:10000000:65536 /* lower idmapped mount */, 4);
| | 10000004 = from_kuid(&init_user_ns, 10000004);
| | |_______________________
| | } |
| | |
| |> posix_acl_getxattr_idmapped_mnt() |
| { V
| 10000004 = make_kuid(&init_user_ns, 10000004);
| 10000004 = mapped_kuid_fs(&init_user_ns /* no idmapped mount */, 10000004);
| 10000004 = from_kuid(0(&init_user_ns, 10000004);
| |_________________________________________________
| } |
| |
|> posix_acl_fix_xattr_to_user() |
{ V
10000004 = make_kuid(0:0:4k /* init_user_ns */, 10000004);
/* SUCCESS */
4 = from_kuid(0:10000000:65536 /* caller's idmappings */, 10000004);
}
The last remaining problem we need to fix here is ovl_get_acl(). During
ovl_permission() overlayfs will call:
ovl_permission()
-> generic_permission()
-> acl_permission_check()
-> check_acl()
-> get_acl()
-> inode->i_op->get_acl() == ovl_get_acl()
> get_acl() /* on the underlying filesystem)
->inode->i_op->get_acl() == /*lower filesystem callback */
-> posix_acl_permission()
passing through the get_acl request to the underlying filesystem. This will
retrieve the acls stored in the lower filesystem without taking the
idmapping of the underlying mount into account as this would mean altering
the cached values for the lower filesystem. The simple solution is to have
ovl_get_acl() simply duplicate the ACLs, update the values according to the
idmapped mount and return it to acl_permission_check() so it can be used in
posix_acl_permission(). Since overlayfs doesn't cache ACLs they'll be
released right after.
Link: https://github.com/brauner/mount-idmapped/issues/9
Cc: Seth Forshee <sforshee@digitalocean.com>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: linux-unionfs@vger.kernel.org
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Fixes: bc70682a49 ("ovl: support idmapped layers")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
32 bit sqe->cmd_op is an union with 64 bit values. It's always a good
idea to do padding explicitly. Also zero check it in prep, so it can be
used in the future if needed without compatibility concerns.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/e6b95a05e970af79000435166185e85b196b2ba2.1657202417.git.asml.silence@gmail.com
[axboe: turn bitwise OR into logical variant]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If an NFS file is opened for writing and closed, fscache_invalidate() will
be asked to invalidate the file - however, if the cookie is in the
LOOKING_UP state (or the CREATING state), then request to invalidate
doesn't get recorded for fscache_cookie_state_machine() to do something
with.
Fix this by making __fscache_invalidate() set a flag if it sees the cookie
is in the LOOKING_UP state to indicate that we need to go to invalidation.
Note that this requires a count on the n_accesses counter for the state
machine, which that will release when it's done.
fscache_cookie_state_machine() then shifts to the INVALIDATING state if it
sees the flag.
Without this, an nfs file can get corrupted if it gets modified locally and
then read locally as the cache contents may not get updated.
Fixes: d24af13e2e ("fscache: Implement cookie invalidation")
Reported-by: Max Kellermann <mk@cm4all.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Max Kellermann <mk@cm4all.com>
Link: https://lore.kernel.org/r/YlWWbpW5Foynjllo@rabbit.intern.cm-ag [1]
When an anonymous fd is released, only flush the requests
associated with it, rather than all of requests in xarray.
Fixes: 9032b6e858 ("cachefiles: implement on-demand read")
Signed-off-by: Jia Zhu <zhujia.zj@bytedance.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://listman.redhat.com/archives/linux-cachefs/2022-June/006937.html
After waiting for the volume to complete the acquisition with timeout,
the if condition under which potential volume collision occurs should be
acquire the volume is still pending rather than not pending so that we
will continue to wait until the pending flag is cleared. Also, use the
existing test pending wrapper directly instead of test_bit().
Fixes: 62ab633523 ("fscache: Implement volume registration")
Signed-off-by: Yue Hu <huyue2@coolpad.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Link: https://listman.redhat.com/archives/linux-cachefs/2022-May/006918.html
The permission flags of newly created symlinks are wrongly dropped on
nilfs2 with the current umask value even though symlinks should have 777
(rwxrwxrwx) permissions:
$ umask
0022
$ touch file && ln -s file symlink; ls -l file symlink
-rw-r--r--. 1 root root 0 Jun 23 16:29 file
lrwxr-xr-x. 1 root root 4 Jun 23 16:29 symlink -> file
This fixes the bug by inserting a missing check that excludes
symlinks.
Link: https://lkml.kernel.org/r/1655974441-5612-1-git-send-email-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: Tommy Pettersson <ptp@lysator.liu.se>
Reported-by: Ciprian Craciun <ciprian.craciun@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
- Fix statfs blocking on background inode gc workers
- Fix some broken inode lock assertion code
- Fix xattr leaf buffer leaks when cancelling a deferred xattr update
operation
- Clean up xattr recovery to make it easier to understand.
- Fix xattr leaf block verifiers tripping over empty blocks.
- Remove complicated and error prone xattr leaf block bholding mess.
- Fix a bug where an rt extent crossing EOF was treated as "posteof"
blocks and cleaned unnecessarily.
- Fix a UAF when log shutdown races with unmount.
-----BEGIN PGP SIGNATURE-----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=8QeL
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.19-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
"This fixes some stalling problems and corrects the last of the
problems (I hope) observed during testing of the new atomic xattr
update feature.
- Fix statfs blocking on background inode gc workers
- Fix some broken inode lock assertion code
- Fix xattr leaf buffer leaks when cancelling a deferred xattr update
operation
- Clean up xattr recovery to make it easier to understand.
- Fix xattr leaf block verifiers tripping over empty blocks.
- Remove complicated and error prone xattr leaf block bholding mess.
- Fix a bug where an rt extent crossing EOF was treated as "posteof"
blocks and cleaned unnecessarily.
- Fix a UAF when log shutdown races with unmount"
* tag 'xfs-5.19-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: prevent a UAF when log IO errors race with unmount
xfs: dont treat rt extents beyond EOF as eofblocks to be cleared
xfs: don't hold xattr leaf buffers across transaction rolls
xfs: empty xattr leaf header blocks are not corruption
xfs: clean up the end of xfs_attri_item_recover
xfs: always free xattri_leaf_bp when cancelling a deferred op
xfs: use invalidate_lock to check the state of mmap_lock
xfs: factor out the common lock flags assert
xfs: introduce xfs_inodegc_push()
xfs: bound maximum wait time for inodegc work
- Bugfixes:
- Allocate a fattr for _nfs4_discover_trunking()
- Fix module reference count leak in nfs4_run_state_manager()
-----BEGIN PGP SIGNATURE-----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=OYKI
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-5.19-3' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client fixes from Anna Schumaker:
- Allocate a fattr for _nfs4_discover_trunking()
- Fix module reference count leak in nfs4_run_state_manager()
* tag 'nfs-for-5.19-3' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFSv4: Add an fattr allocation to _nfs4_discover_trunking()
NFS: restore module put when manager exits.
issue on the MDS side, but for now we are going with this one-liner
to avoid busy looping and potential soft lockups.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAmK/C8MTHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi1cEB/9CiJoDsc1v+DrP/4Ud/AbI4LMffMcr
tkHmUo8ZT5D4feUzSFE6iKgb3gRCJUkYKzesywQ7Xhv7Mr6/DKB4+t9QtrympZFd
sAg775mHkL0NI6/OLnLSRva/r627PFk6f1v8OWENOjsw01PLOtWAB/B5FqlgN8tG
EQLfX0G83o4AXt4NcPCcsucPh7FxC2iKe8XWqAE6VTjkKnyz3IQHvSLweWV68U8R
ht6eun8H+slx8Kw1lSZfW/XoFGFO4uKntCh/CKKH28ZqaXrxrdsfmXSVOMlOi351
qxPfrTPgaSfvWQLbYQfPdQZCsfyyPgP2wdAVfpy56vk0yoxi2TLGBPsD
=bu9O
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-5.19-rc5' of https://github.com/ceph/ceph-client
Pull ceph fix from Ilya Dryomov:
"A ceph filesystem fix, marked for stable.
There appears to be a deeper issue on the MDS side, but for now we are
going with this one-liner to avoid busy looping and potential soft
lockups"
* tag 'ceph-for-5.19-rc5' of https://github.com/ceph/ceph-client:
ceph: wait on async create before checking caps for syncfs
-----BEGIN PGP SIGNATURE-----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=Edge
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.19-2022-07-01' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"Two minor tweaks:
- While we still can, adjust the send/recv based flags to be in
->ioprio rather than in ->addr2. This is consistent with eg accept,
and also doesn't waste a full 64-bit field for flags (Pavel)
- 5.18-stable fix for re-importing provided buffers. Not much real
world relevance here as it'll only impact non-pollable files gone
async, which is more of a practical test case rather than something
that is used in the wild (Dylan)"
* tag 'io_uring-5.19-2022-07-01' of git://git.kernel.dk/linux-block:
io_uring: fix provided buffer import
io_uring: keep sendrecv flags in ioprio
KASAN reported the following use after free bug when running
generic/475:
XFS (dm-0): Mounting V5 Filesystem
XFS (dm-0): Starting recovery (logdev: internal)
XFS (dm-0): Ending recovery (logdev: internal)
Buffer I/O error on dev dm-0, logical block 20639616, async page read
Buffer I/O error on dev dm-0, logical block 20639617, async page read
XFS (dm-0): log I/O error -5
XFS (dm-0): Filesystem has been shut down due to log error (0x2).
XFS (dm-0): Unmounting Filesystem
XFS (dm-0): Please unmount the filesystem and rectify the problem(s).
==================================================================
BUG: KASAN: use-after-free in do_raw_spin_lock+0x246/0x270
Read of size 4 at addr ffff888109dd84c4 by task 3:1H/136
CPU: 3 PID: 136 Comm: 3:1H Not tainted 5.19.0-rc4-xfsx #rc4 8e53ab5ad0fddeb31cee5e7063ff9c361915a9c4
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
Workqueue: xfs-log/dm-0 xlog_ioend_work [xfs]
Call Trace:
<TASK>
dump_stack_lvl+0x34/0x44
print_report.cold+0x2b8/0x661
? do_raw_spin_lock+0x246/0x270
kasan_report+0xab/0x120
? do_raw_spin_lock+0x246/0x270
do_raw_spin_lock+0x246/0x270
? rwlock_bug.part.0+0x90/0x90
xlog_force_shutdown+0xf6/0x370 [xfs 4ad76ae0d6add7e8183a553e624c31e9ed567318]
xlog_ioend_work+0x100/0x190 [xfs 4ad76ae0d6add7e8183a553e624c31e9ed567318]
process_one_work+0x672/0x1040
worker_thread+0x59b/0xec0
? __kthread_parkme+0xc6/0x1f0
? process_one_work+0x1040/0x1040
? process_one_work+0x1040/0x1040
kthread+0x29e/0x340
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x1f/0x30
</TASK>
Allocated by task 154099:
kasan_save_stack+0x1e/0x40
__kasan_kmalloc+0x81/0xa0
kmem_alloc+0x8d/0x2e0 [xfs]
xlog_cil_init+0x1f/0x540 [xfs]
xlog_alloc_log+0xd1e/0x1260 [xfs]
xfs_log_mount+0xba/0x640 [xfs]
xfs_mountfs+0xf2b/0x1d00 [xfs]
xfs_fs_fill_super+0x10af/0x1910 [xfs]
get_tree_bdev+0x383/0x670
vfs_get_tree+0x7d/0x240
path_mount+0xdb7/0x1890
__x64_sys_mount+0x1fa/0x270
do_syscall_64+0x2b/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
Freed by task 154151:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x30
kasan_set_free_info+0x20/0x30
____kasan_slab_free+0x110/0x190
slab_free_freelist_hook+0xab/0x180
kfree+0xbc/0x310
xlog_dealloc_log+0x1b/0x2b0 [xfs]
xfs_unmountfs+0x119/0x200 [xfs]
xfs_fs_put_super+0x6e/0x2e0 [xfs]
generic_shutdown_super+0x12b/0x3a0
kill_block_super+0x95/0xd0
deactivate_locked_super+0x80/0x130
cleanup_mnt+0x329/0x4d0
task_work_run+0xc5/0x160
exit_to_user_mode_prepare+0xd4/0xe0
syscall_exit_to_user_mode+0x1d/0x40
entry_SYSCALL_64_after_hwframe+0x46/0xb0
This appears to be a race between the unmount process, which frees the
CIL and waits for in-flight iclog IO; and the iclog IO completion. When
generic/475 runs, it starts fsstress in the background, waits a few
seconds, and substitutes a dm-error device to simulate a disk falling
out of a machine. If the fsstress encounters EIO on a pure data write,
it will exit but the filesystem will still be online.
The next thing the test does is unmount the filesystem, which tries to
clean the log, free the CIL, and wait for iclog IO completion. If an
iclog was being written when the dm-error switch occurred, it can race
with log unmounting as follows:
Thread 1 Thread 2
xfs_log_unmount
xfs_log_clean
xfs_log_quiesce
xlog_ioend_work
<observe error>
xlog_force_shutdown
test_and_set_bit(XLOG_IOERROR)
xfs_log_force
<log is shut down, nop>
xfs_log_umount_write
<log is shut down, nop>
xlog_dealloc_log
xlog_cil_destroy
<wait for iclogs>
spin_lock(&log->l_cilp->xc_push_lock)
<KABOOM>
Therefore, free the CIL after waiting for the iclogs to complete. I
/think/ this race has existed for quite a few years now, though I don't
remember the ~2014 era logging code well enough to know if it was a real
threat then or if the actual race was exposed only more recently.
Fixes: ac983517ec ("xfs: don't sleep in xlog_cil_force_lsn on shutdown")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
A regression has been reported by Nicolas Boichat, found while using the
copy_file_range syscall to copy a tracefs file.
Before commit 5dae222a5f ("vfs: allow copy_file_range to copy across
devices") the kernel would return -EXDEV to userspace when trying to
copy a file across different filesystems. After this commit, the
syscall doesn't fail anymore and instead returns zero (zero bytes
copied), as this file's content is generated on-the-fly and thus reports
a size of zero.
Another regression has been reported by He Zhe - the assertion of
WARN_ON_ONCE(ret == -EOPNOTSUPP) can be triggered from userspace when
copying from a sysfs file whose read operation may return -EOPNOTSUPP.
Since we do not have test coverage for copy_file_range() between any two
types of filesystems, the best way to avoid these sort of issues in the
future is for the kernel to be more picky about filesystems that are
allowed to do copy_file_range().
This patch restores some cross-filesystem copy restrictions that existed
prior to commit 5dae222a5f ("vfs: allow copy_file_range to copy across
devices"), namely, cross-sb copy is not allowed for filesystems that do
not implement ->copy_file_range().
Filesystems that do implement ->copy_file_range() have full control of
the result - if this method returns an error, the error is returned to
the user. Before this change this was only true for fs that did not
implement the ->remap_file_range() operation (i.e. nfsv3).
Filesystems that do not implement ->copy_file_range() still fall-back to
the generic_copy_file_range() implementation when the copy is within the
same sb. This helps the kernel can maintain a more consistent story
about which filesystems support copy_file_range().
nfsd and ksmbd servers are modified to fall-back to the
generic_copy_file_range() implementation in case vfs_copy_file_range()
fails with -EOPNOTSUPP or -EXDEV, which preserves behavior of
server-side-copy.
fall-back to generic_copy_file_range() is not implemented for the smb
operation FSCTL_DUPLICATE_EXTENTS_TO_FILE, which is arguably a correct
change of behavior.
Fixes: 5dae222a5f ("vfs: allow copy_file_range to copy across devices")
Link: https://lore.kernel.org/linux-fsdevel/20210212044405.4120619-1-drinkcat@chromium.org/
Link: https://lore.kernel.org/linux-fsdevel/CANMq1KDZuxir2LM5jOTm0xx+BnvW=ZmpsG47CyHFJwnw7zSX6Q@mail.gmail.com/
Link: https://lore.kernel.org/linux-fsdevel/20210126135012.1.If45b7cdc3ff707bc1efa17f5366057d60603c45f@changeid/
Link: https://lore.kernel.org/linux-fsdevel/20210630161320.29006-1-lhenriques@suse.de/
Reported-by: Nicolas Boichat <drinkcat@chromium.org>
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Luis Henriques <lhenriques@suse.de>
Fixes: 64bf5ff58d ("vfs: no fallback for ->copy_file_range")
Link: https://lore.kernel.org/linux-fsdevel/20f17f64-88cb-4e80-07c1-85cb96c83619@windriver.com/
Reported-by: He Zhe <zhe.he@windriver.com>
Tested-by: Namjae Jeon <linkinjeon@kernel.org>
Tested-by: Luis Henriques <lhenriques@suse.de>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit f49169c97f ("NFSD: Remove svc_serv_ops::svo_module") removed
calls to module_put_and_kthread_exit() from threads that acted as SUNRPC
servers and had a related svc_serv_ops structure. This was correct.
It ALSO removed the module_put_and_kthread_exit() call from
nfs4_run_state_manager() which is NOT a SUNRPC service.
Consequently every time the NFSv4 state manager runs the module count
increments and won't be decremented. So the nfsv4 module cannot be
unloaded.
So restore the module_put_and_kthread_exit() call.
Fixes: f49169c97f ("NFSD: Remove svc_serv_ops::svo_module")
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
io_import_iovec uses the s pointer, but this was changed immediately
after the iovec was re-imported and so it was imported into the wrong
place.
Change the ordering.
Fixes: 2be2eb02e2 ("io_uring: ensure reads re-import for selected buffers")
Signed-off-by: Dylan Yudaken <dylany@fb.com>
Link: https://lore.kernel.org/r/20220630132006.2825668-1-dylany@fb.com
[axboe: ensure we don't half-import as well]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull fanotify fix from Jan Kara:
"A fix for recently added fanotify API to have stricter checks and
refuse some invalid flag combinations to make our life easier in the
future"
* tag 'fsnotify_for_v5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fanotify: refine the validation checks on non-dir inode mask
We waste a u64 SQE field for flags even though we don't need as many
bits and it can be used for something more useful later. Store io_uring
specific send/recv flags in sqe->ioprio instead of ->addr2.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Fixes: 0455d4ccec ("io_uring: add POLL_FIRST support for send/sendmsg and recv/recvmsg")
[axboe: change comment in io_uring.h as well]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=8zjT
-----END PGP SIGNATURE-----
Merge tag '5.19-rc4-ksmbd-server-fixes' of git://git.samba.org/ksmbd
Pull ksmbd server fixes from Steve French:
- seek null check (don't use f_seek op directly and blindly)
- offset validation in FSCTL_SET_ZERO_DATA
- fallocate fix (relates e.g. to xfstests generic/091 and 263)
- two cleanup fixes
- fix socket settings on some arch
* tag '5.19-rc4-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: use vfs_llseek instead of dereferencing NULL
ksmbd: check invalid FileOffset and BeyondFinalZero in FSCTL_ZERO_DATA
ksmbd: set the range of bytes to zero without extending file size in FSCTL_ZERO_DATA
ksmbd: remove duplicate flag set in smb2_write
ksmbd: smbd: Remove useless license text when SPDX-License-Identifier is already used
ksmbd: use SOCK_NONBLOCK type for kernel_accept()
Currently, we'll call ceph_check_caps, but if we're still waiting
on the reply, we'll end up spinning around on the same inode in
flush_dirty_session_caps. Wait for the async create reply before
flushing caps.
Cc: stable@vger.kernel.org
URL: https://tracker.ceph.com/issues/55823
Fixes: fbed7045f5 ("ceph: wait for async create reply before sending any cap messages")
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
On a system with a realtime volume and a 28k realtime extent,
generic/491 fails because the test opens a file on a frozen filesystem
and closing it causes xfs_release -> xfs_can_free_eofblocks to
mistakenly think that the the blocks of the realtime extent beyond EOF
are posteof blocks to be freed. Realtime extents cannot be partially
unmapped, so this is pointless. Worse yet, this triggers posteof
cleanup, which stalls on a transaction allocation, which is why the test
fails.
Teach the predicate to account for realtime extents properly.
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Now that we've established (again!) that empty xattr leaf buffers are
ok, we no longer need to bhold them to transactions when we're creating
new leaf blocks. Get rid of the entire mechanism, which should simplify
the xattr code quite a bit.
The original justification for using bhold here was to prevent the AIL
from trying to write the empty leaf block into the fs during the brief
time that we release the buffer lock. The reason for /that/ was to
prevent recovery from tripping over the empty ondisk block.
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
TLDR: Revert commit 51e6104fdb ("xfs: detect empty attr leaf blocks in
xfs_attr3_leaf_verify") because it was wrong.
Every now and then we get a corruption report from the kernel or
xfs_repair about empty leaf blocks in the extended attribute structure.
We've long thought that these shouldn't be possible, but prior to 5.18
one would shake loose in the recoveryloop fstests about once a month.
A new addition to the xattr leaf block verifier in 5.19-rc1 makes this
happen every 7 minutes on my testing cloud. I added a ton of logging to
detect any time we set the header count on an xattr leaf block to zero.
This produced the following dmesg output on generic/388:
XFS (sda4): ino 0x21fcbaf leaf 0x129bf78 hdcount==0!
Call Trace:
<TASK>
dump_stack_lvl+0x34/0x44
xfs_attr3_leaf_create+0x187/0x230
xfs_attr_shortform_to_leaf+0xd1/0x2f0
xfs_attr_set_iter+0x73e/0xa90
xfs_xattri_finish_update+0x45/0x80
xfs_attr_finish_item+0x1b/0xd0
xfs_defer_finish_noroll+0x19c/0x770
__xfs_trans_commit+0x153/0x3e0
xfs_attr_set+0x36b/0x740
xfs_xattr_set+0x89/0xd0
__vfs_setxattr+0x67/0x80
__vfs_setxattr_noperm+0x6e/0x120
vfs_setxattr+0x97/0x180
setxattr+0x88/0xa0
path_setxattr+0xc3/0xe0
__x64_sys_setxattr+0x27/0x30
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
So now we know that someone is creating empty xattr leaf blocks as part
of converting a sf xattr structure into a leaf xattr structure. The
conversion routine logs any existing sf attributes in the same
transaction that creates the leaf block, so we know this is a setxattr
to a file that has no attributes at all.
Next, g/388 calls the shutdown ioctl and cycles the mount to trigger log
recovery. I also augmented buffer item recovery to call ->verify_struct
on any attr leaf blocks and complain if it finds a failure:
XFS (sda4): Unmounting Filesystem
XFS (sda4): Mounting V5 Filesystem
XFS (sda4): Starting recovery (logdev: internal)
XFS (sda4): xattr leaf daddr 0x129bf78 hdrcount == 0!
Call Trace:
<TASK>
dump_stack_lvl+0x34/0x44
xfs_attr3_leaf_verify+0x3b8/0x420
xlog_recover_buf_commit_pass2+0x60a/0x6c0
xlog_recover_items_pass2+0x4e/0xc0
xlog_recover_commit_trans+0x33c/0x350
xlog_recovery_process_trans+0xa5/0xe0
xlog_recover_process_data+0x8d/0x140
xlog_do_recovery_pass+0x19b/0x720
xlog_do_log_recovery+0x62/0xc0
xlog_do_recover+0x33/0x1d0
xlog_recover+0xda/0x190
xfs_log_mount+0x14c/0x360
xfs_mountfs+0x517/0xa60
xfs_fs_fill_super+0x6bc/0x950
get_tree_bdev+0x175/0x280
vfs_get_tree+0x1a/0x80
path_mount+0x6f5/0xaa0
__x64_sys_mount+0x103/0x140
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7fc61e241eae
And a moment later, the _delwri_submit of the recovered buffers trips
the same verifier and recovery fails:
XFS (sda4): Metadata corruption detected at xfs_attr3_leaf_verify+0x393/0x420 [xfs], xfs_attr3_leaf block 0x129bf78
XFS (sda4): Unmount and run xfs_repair
XFS (sda4): First 128 bytes of corrupted metadata buffer:
00000000: 00 00 00 00 00 00 00 00 3b ee 00 00 00 00 00 00 ........;.......
00000010: 00 00 00 00 01 29 bf 78 00 00 00 00 00 00 00 00 .....).x........
00000020: a5 1b d0 02 b2 9a 49 df 8e 9c fb 8d f8 31 3e 9d ......I......1>.
00000030: 00 00 00 00 02 1f cb af 00 00 00 00 10 00 00 00 ................
00000040: 00 50 0f b0 00 00 00 00 00 00 00 00 00 00 00 00 .P..............
00000050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
XFS (sda4): Corruption of in-memory data (0x8) detected at _xfs_buf_ioapply+0x37f/0x3b0 [xfs] (fs/xfs/xfs_buf.c:1518). Shutting down filesystem.
XFS (sda4): Please unmount the filesystem and rectify the problem(s)
XFS (sda4): log mount/recovery failed: error -117
XFS (sda4): log mount failed
I think I see what's going on here -- setxattr is racing with something
that shuts down the filesystem:
Thread 1 Thread 2
-------- --------
xfs_attr_sf_addname
xfs_attr_shortform_to_leaf
<create empty leaf>
xfs_trans_bhold(leaf)
xattri_dela_state = XFS_DAS_LEAF_ADD
<roll transaction>
<flush log>
<shut down filesystem>
xfs_trans_bhold_release(leaf)
<discover fs is dead, bail>
Thread 3
--------
<cycle mount, start recovery>
xlog_recover_buf_commit_pass2
xlog_recover_do_reg_buffer
<replay empty leaf buffer from recovered buf item>
xfs_buf_delwri_queue(leaf)
xfs_buf_delwri_submit
_xfs_buf_ioapply(leaf)
xfs_attr3_leaf_write_verify
<trip over empty leaf buffer>
<fail recovery>
As you can see, the bhold keeps the leaf buffer locked and thus prevents
the *AIL* from tripping over the ichdr.count==0 check in the write
verifier. Unfortunately, it doesn't prevent the log from getting
flushed to disk, which sets up log recovery to fail.
So. It's clear that the kernel has always had the ability to persist
attr leaf blocks with ichdr.count==0, which means that it's part of the
ondisk format now.
Unfortunately, this check has been added and removed multiple times
throughout history. It first appeared in[1] kernel 3.10 as part of the
early V5 format patches. The check was later discovered to break log
recovery and hence disabled[2] during log recovery in kernel 4.10.
Simultaneously, the check was added[3] to xfs_repair 4.9.0 to try to
weed out the empty leaf blocks. This was still not correct because log
recovery would recover an empty attr leaf block successfully only for
regular xattr operations to trip over the empty block during of the
block during regular operation. Therefore, the check was removed
entirely[4] in kernel 5.7 but removal of the xfs_repair check was
forgotten. The continued complaints from xfs_repair lead to us
mistakenly re-adding[5] the verifier check for kernel 5.19. Remove it
once again.
[1] 517c22207b ("xfs: add CRCs to attr leaf blocks")
[2] 2e1d23370e ("xfs: ignore leaf attr ichdr.count in verifier
during log replay")
[3] f7140161 ("xfs_repair: junk leaf attribute if count == 0")
[4] f28cef9e4d ("xfs: don't fail verifier on empty attr3 leaf
block")
[5] 51e6104fdb ("xfs: detect empty attr leaf blocks in
xfs_attr3_leaf_verify")
Looking at the rest of the xattr code, it seems that files with empty
leaf blocks behave as expected -- listxattr reports no attributes;
getxattr on any xattr returns nothing as expected; removexattr does
nothing; and setxattr can add attributes just fine.
Original-bug: 517c22207b ("xfs: add CRCs to attr leaf blocks")
Still-not-fixed-by: 2e1d23370e ("xfs: ignore leaf attr ichdr.count in verifier during log replay")
Removed-in: f28cef9e4d ("xfs: don't fail verifier on empty attr3 leaf block")
Fixes: 51e6104fdb ("xfs: detect empty attr leaf blocks in xfs_attr3_leaf_verify")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Commit ceaf69f8ea ("fanotify: do not allow setting dirent events in
mask of non-dir") added restrictions about setting dirent events in the
mask of a non-dir inode mark, which does not make any sense.
For backward compatibility, these restictions were added only to new
(v5.17+) APIs.
It also does not make any sense to set the flags FAN_EVENT_ON_CHILD or
FAN_ONDIR in the mask of a non-dir inode. Add these flags to the
dir-only restriction of the new APIs as well.
Move the check of the dir-only flags for new APIs into the helper
fanotify_events_supported(), which is only called for FAN_MARK_ADD,
because there is no need to error on an attempt to remove the dir-only
flags from non-dir inode.
Fixes: ceaf69f8ea ("fanotify: do not allow setting dirent events in mask of non-dir")
Link: https://lore.kernel.org/linux-fsdevel/20220627113224.kr2725conevh53u4@quack3.lan/
Link: https://lore.kernel.org/r/20220627174719.2838175-1-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
commit 555dbf1a9a ("nfsd: Replace use of rwsem with errseq_t")
incidentally broke translation of -EINVAL to nfserr_notsupp.
The patch restores that.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Fixes: 555dbf1a9a ("nfsd: Replace use of rwsem with errseq_t")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The end of this function could use some cleanup -- the EAGAIN
conditionals make it harder to figure out what's going on with the
disposal of xattri_leaf_bp, and the dual error/ret variables aren't
needed. Turn the EAGAIN case into a separate block documenting all the
subtleties of recovering in the middle of an xattr update chain, which
makes the rest of the prologue much simpler.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
While running the following fstest with logged xattrs DISabled, I
noticed the following:
# FSSTRESS_AVOID="-z -f unlink=1 -f rmdir=1 -f creat=2 -f mkdir=2 -f
getfattr=3 -f listfattr=3 -f attr_remove=4 -f removefattr=4 -f
setfattr=20 -f attr_set=60" ./check generic/475
INFO: task u9:1:40 blocked for more than 61 seconds.
Tainted: G O 5.19.0-rc2-djwx #rc2
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:u9:1 state:D stack:12872 pid: 40 ppid: 2 flags:0x00004000
Workqueue: xfs-cil/dm-0 xlog_cil_push_work [xfs]
Call Trace:
<TASK>
__schedule+0x2db/0x1110
schedule+0x58/0xc0
schedule_timeout+0x115/0x160
__down_common+0x126/0x210
down+0x54/0x70
xfs_buf_lock+0x2d/0xe0 [xfs 0532c1cb1d67dd81d15cb79ac6e415c8dec58f73]
xfs_buf_item_unpin+0x227/0x3a0 [xfs 0532c1cb1d67dd81d15cb79ac6e415c8dec58f73]
xfs_trans_committed_bulk+0x18e/0x320 [xfs 0532c1cb1d67dd81d15cb79ac6e415c8dec58f73]
xlog_cil_committed+0x2ea/0x360 [xfs 0532c1cb1d67dd81d15cb79ac6e415c8dec58f73]
xlog_cil_push_work+0x60f/0x690 [xfs 0532c1cb1d67dd81d15cb79ac6e415c8dec58f73]
process_one_work+0x1df/0x3c0
worker_thread+0x53/0x3b0
kthread+0xea/0x110
ret_from_fork+0x1f/0x30
</TASK>
This appears to be the result of shortform_to_leaf creating a new leaf
buffer as part of adding an xattr to a file. The new leaf buffer is
held and attached to the xfs_attr_intent structure, but then the
filesystem shuts down. Instead of the usual path (which adds the attr
to the held leaf buffer which releases the hold), we instead cancel the
entire deferred operation.
Unfortunately, xfs_attr_cancel_item doesn't release any attached leaf
buffers, so we leak the locked buffer. The CIL cannot do anything
about that, and hangs. Fix this by teaching it to release leaf buffers,
and make XFS a little more careful about not leaving a dangling
reference.
The prologue of xfs_attri_item_recover is (in this author's opinion) a
little hard to figure out, so I'll clean that up in the next patch.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
We should use invalidate_lock and XFS_MMAPLOCK_SHARED to check the state
of mmap_lock rw_semaphore in xfs_isilocked(), rather than i_rwsem and
XFS_IOLOCK_SHARED.
Fixes: 2433480a7e ("xfs: Convert to use invalidate_lock")
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
There are similar lock flags assert in xfs_ilock(), xfs_ilock_nowait(),
xfs_iunlock(), thus we can factor it out into a helper that is clear.
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Fixes for post-5.18 changes:
- fix for a damon boot hang, from SeongJae
- fix for a kfence warning splat, from Jason Donenfeld
- fix for zero-pfn pinning, from Alex Williamson
- fix for fallocate hole punch clearing, from Mike Kravetz
Fixes pre-5.18 material:
- fix for a performance regression, from Marcelo
- fix for a hwpoisining BUG from zhenwei pi
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYri4RgAKCRDdBJ7gKXxA
jmhsAQDCvGqtIUhgkTwid8KBRNbowsg0LXd6k+gUjcxBhH403wEA0r0cxxkDAmgr
QNXn/qZRzQP2ji+pdjH9NBOsd2g2XQA=
=UGJ7
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2022-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"Minor things, mainly - mailmap updates, MAINTAINERS updates, etc.
Fixes for this merge window:
- fix for a damon boot hang, from SeongJae
- fix for a kfence warning splat, from Jason Donenfeld
- fix for zero-pfn pinning, from Alex Williamson
- fix for fallocate hole punch clearing, from Mike Kravetz
Fixes for previous releases:
- fix for a performance regression, from Marcelo
- fix for a hwpoisining BUG from zhenwei pi"
* tag 'mm-hotfixes-stable-2022-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mailmap: add entry for Christian Marangi
mm/memory-failure: disable unpoison once hw error happens
hugetlbfs: zero partial pages during fallocate hole punch
mm: memcontrol: reference to tools/cgroup/memcg_slabinfo.py
mm: re-allow pinning of zero pfns
mm/kfence: select random number before taking raw lock
MAINTAINERS: add maillist information for LoongArch
MAINTAINERS: update MM tree references
MAINTAINERS: update Abel Vesa's email
MAINTAINERS: add MEMORY HOT(UN)PLUG section and add David as reviewer
MAINTAINERS: add Miaohe Lin as a memory-failure reviewer
mailmap: add alias for jarkko@profian.com
mm/damon/reclaim: schedule 'damon_reclaim_timer' only after 'system_wq' is initialized
kthread: make it clear that kthread_create_on_node() might be terminated by any fatal signal
mm: lru_cache_disable: use synchronize_rcu_expedited
mm/page_isolation.c: fix one kernel-doc comment
-----BEGIN PGP SIGNATURE-----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=rUrf
-----END PGP SIGNATURE-----
Merge tag 'for-5.19-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- zoned relocation fixes:
- fix critical section end for extent writeback, this could lead
to out of order write
- prevent writing to previous data relocation block group if space
gets low
- reflink fixes:
- fix race between reflinking and ordered extent completion
- proper error handling when block reserve migration fails
- add missing inode iversion/mtime/ctime updates on each iteration
when replacing extents
- fix deadlock when running fsync/fiemap/commit at the same time
- fix false-positive KCSAN report regarding pid tracking for read locks
and data race
- minor documentation update and link to new site
* tag 'for-5.19-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Documentation: update btrfs list of features and link to readthedocs.io
btrfs: fix deadlock with fsync+fiemap+transaction commit
btrfs: don't set lock_owner when locking extent buffer for reading
btrfs: zoned: fix critical section of relocation inode writeback
btrfs: zoned: prevent allocation from previous data relocation BG
btrfs: do not BUG_ON() on failure to migrate space when replacing extents
btrfs: add missing inode updates on each iteration when replacing extents
btrfs: fix race between reflinking and ordered extent completion
- Use updated exfat_chain directly instead of snapshot values in rename.
-----BEGIN PGP SIGNATURE-----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=GSFP
-----END PGP SIGNATURE-----
Merge tag 'exfat-for-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat
Pull exfat fix from Namjae Jeon:
- Use updated exfat_chain directly instead of snapshot values in
rename.
* tag 'exfat-for-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: use updated exfat_chain directly during renaming
-----BEGIN PGP SIGNATURE-----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=Y554
-----END PGP SIGNATURE-----
Merge tag '5.19-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs client fixes from Steve French:
"Fixes addressing important multichannel, and reconnect issues.
Multichannel mounts when the server network interfaces changed, or ip
addresses changed, uncovered problems, especially in reconnect, but
the patches for this were held up until recently due to some lock
conflicts that are now addressed.
Included in this set of fixes:
- three fixes relating to multichannel reconnect, dynamically
adjusting the list of server interfaces to avoid problems during
reconnect
- a lock conflict fix related to the above
- two important fixes for negotiate on secondary channels (null
netname can unintentionally cause multichannel to be disabled to
some servers)
- a reconnect fix (reporting incorrect IP address in some cases)"
* tag '5.19-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update cifs_ses::ip_addr after failover
cifs: avoid deadlocks while updating iface
cifs: periodically query network interfaces from server
cifs: during reconnect, update interface if necessary
cifs: change iface_list from array to sorted linked list
smb3: use netname when available on secondary channels
smb3: fix empty netname context on secondary channels
By not checking whether llseek is NULL, this might jump to NULL. Also,
it doesn't check FMODE_LSEEK. Fix this by using vfs_llseek(), which
always does the right thing.
Fixes: f441584858 ("cifsd: add file operations")
Cc: stable@vger.kernel.org
Cc: linux-cifs@vger.kernel.org
Cc: Ronnie Sahlberg <lsahlber@redhat.com>
Cc: Hyunchul Lee <hyc.lee@gmail.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
This includes some urgent fixes to avoid generating corrupted inodes
caused by compressed and inline_data files. In addition, another patch
tries to avoid wrong error report which prevents a roll-forward
recovery.
-----BEGIN PGP SIGNATURE-----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=m3Fh
-----END PGP SIGNATURE-----
Merge tag 'f2fs-for-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs fixes from Jaegeuk Kim:
"Some urgent fixes to avoid generating corrupted inodes caused by
compressed and inline_data files.
In addition, avoid a wrong error report which prevents a roll-forward
recovery"
* tag 'f2fs-for-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
f2fs: do not count ENOENT for error case
f2fs: fix iostat related lock protection
f2fs: attach inline_data after setting compression
cifs_ses::ip_addr wasn't being updated in cifs_session_setup() when
reconnecting SMB sessions thus returning wrong value in
/proc/fs/cifs/DebugData.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Cc: stable@kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
-----BEGIN PGP SIGNATURE-----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=Z57a
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.19-2022-06-24' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"A few fixes that should go into the 5.19 release. All are fixing
issues that either happened in this release, or going to stable.
In detail:
- A small series of fixlets for the poll handling, all destined for
stable (Pavel)
- Fix a merge error from myself that caused a potential -EINVAL for
the recv/recvmsg flag setting (me)
- Fix a kbuf recycling issue for partial IO (me)
- Use the original request for the inflight tracking (me)
- Fix an issue introduced this merge window with trace points using a
custom decoder function, which won't work for perf (Dylan)"
* tag 'io_uring-5.19-2022-06-24' of git://git.kernel.dk/linux-block:
io_uring: use original request task for inflight tracking
io_uring: move io_uring_get_opcode out of TP_printk
io_uring: fix double poll leak on repolling
io_uring: fix wrong arm_poll error handling
io_uring: fail links when poll fails
io_uring: fix req->apoll_events
io_uring: fix merge error in checking send/recv addr2 flags
io_uring: mark reissue requests with REQ_F_PARTIAL_IO
We use cifs_tcp_ses_lock to protect a lot of things.
Not only does it protect the lists of connections, sessions,
tree connects, open file lists, etc., we also use it to
protect some fields in each of it's entries.
In this case, cifs_mark_ses_for_reconnect takes the
cifs_tcp_ses_lock to traverse the lists, and then calls
cifs_update_iface. However, that can end up calling
cifs_put_tcp_session, which picks up the same lock again.
Avoid this by taking a ref for the session, drop the lock,
and then call update iface.
Also, in cifs_update_iface, avoid nested locking of iface_lock
and chan_lock, as much as possible. When unavoidable, we need
to pick iface_lock first.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
FileOffset should not be greater than BeyondFinalZero in FSCTL_ZERO_DATA.
And don't call ksmbd_vfs_zero_data() if length is zero.
Cc: stable@vger.kernel.org
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
generic/091, 263 test failed since commit f66f8b94e7 ("cifs: when
extending a file with falloc we should make files not-sparse").
FSCTL_ZERO_DATA sets the range of bytes to zero without extending file
size. The VFS_FALLOCATE_FL_KEEP_SIZE flag should be used even on
non-sparse files.
Cc: stable@vger.kernel.org
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The writethrough flag is set again if is_rdma_channel is false.
Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The current blocking mechanism for pushing the inodegc queue out to
disk can result in systems becoming unusable when there is a long
running inodegc operation. This is because the statfs()
implementation currently issues a blocking flush of the inodegc
queue and a significant number of common system utilities will call
statfs() to discover something about the underlying filesystem.
This can result in userspace operations getting stuck on inodegc
progress, and when trying to remove a heavily reflinked file on slow
storage with a full journal, this can result in delays measuring in
hours.
Avoid this problem by adding "push" function that expedites the
flushing of the inodegc queue, but doesn't wait for it to complete.
Convert xfs_fs_statfs() and xfs_qm_scall_getquota() to use this
mechanism so they don't block but still ensure that queued
operations are expedited.
Fixes: ab23a77687 ("xfs: per-cpu deferred inode inactivation queues")
Reported-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
[djwong: fix _getquota_next to use _inodegc_push too]
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Currently inodegc work can sit queued on the per-cpu queue until
the workqueue is either flushed of the queue reaches a depth that
triggers work queuing (and later throttling). This means that we
could queue work that waits for a long time for some other event to
trigger flushing.
Hence instead of just queueing work at a specific depth, use a
delayed work that queues the work at a bound time. We can still
schedule the work immediately at a given depth, but we no long need
to worry about leaving a number of items on the list that won't get
processed until external events prevail.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
- Check for NULL in kretprobe_dispatcher()
NULL can now be passed in, make sure it can handle it
- Clean up unneeded #endif #ifdef of the same preprocessor check in the
middle of the block.
- Comment clean up
- Remove unneeded initialization of the "ret" variable in
__trace_uprobe_create()
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYrMu9hQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qpuZAP9gS8Xcd7nenV3i9j4lCFktWQrvQwvh
wyNb9UuLqPVMUQEAkk4hzq38P2UvEOZ+v+WdJnXfOb3wpFhrxWFycz5ZVAw=
=9WXA
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
- Check for NULL in kretprobe_dispatcher()
NULL can now be passed in, make sure it can handle it
- Clean up unneeded #endif #ifdef of the same preprocessor
check in the middle of the block.
- Comment clean up
- Remove unneeded initialization of the "ret" variable in
__trace_uprobe_create()
* tag 'trace-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing/uprobes: Remove unwanted initialization in __trace_uprobe_create()
tracefs: Fix syntax errors in comments
tracing: Simplify conditional compilation code in tracing_set_tracer()
tracing/kprobes: Check whether get_kretprobe() returns NULL in kretprobe_dispatcher()
In prior kernels, we did file assignment always at prep time. This meant
that req->task == current. But after deferring that assignment and then
pushing the inflight tracking back in, we've got the inflight tracking
using current when it should in fact now be using req->task.
Fixup that error introduced by adding the inflight tracking back after
file assignments got modifed.
Fixes: 9cae36a094 ("io_uring: reinstate the inflight tracking")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, we only query the server for network interfaces
information at the time of mount, and never afterwards.
This can be a problem, especially for services like Azure,
where the IP address of the channel endpoints can change
over time.
With this change, we schedule a 600s polling of this info
from the server for each tree connect.
An alternative for periodic polling was to do this only at
the time of reconnect. But this could delay the reconnect
time slightly. Also, there are some challenges w.r.t how
we have cifs_reconnect implemented today.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Going forward, the plan is to periodically query the server
for it's interfaces (when multichannel is enabled).
This change allows checking for inactive interfaces during
reconnect, and reconnect to a new interface if necessary.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
A server's published interface list can change over time, and needs
to be updated. We've storing iface_list as a simple array, which
makes it difficult to manipulate an existing list.
With this change, iface_list is modified into a linked list of
interfaces, which is kept sorted by speed.
Also added a reference counter for an iface entry, so that each
channel can maintain a backpointer to the iface and drop it
easily when needed.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Some servers do not allow null netname contexts, which would cause
multichannel to revert to single channel when mounting to some
servers (e.g. Azure xSMB). The previous patch fixed that by avoiding
incorrectly sending the netname context when there would be a null
hostname sent in the netname context, while this patch fixes the null
hostname for the secondary channel by using the hostname of the
primary channel for the secondary channel.
Fixes: 4c14d7043f ("cifs: populate empty hostnames for extra channels")
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
This contains a couple of fixes:
- fid refcounting was incorrect in some corner cases and would
leak resources, only freed at umount time. The first three commits
fix three such cases
- cache=loose or fscache was broken when trying to write a partial
page to a file with no read permission since the rework a few releases
ago. The fix taken here is just to restore old behavior of using the
special 'writeback_fid' for such reads, which is open as root/RDWR
and such not get complains that we try to read on a WRONLY fid.
Long-term it'd be nice to get rid of this and not issue the read at
all (skip cache?) in such cases, but that direction hasn't progressed
-----BEGIN PGP SIGNATURE-----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=2yZw
-----END PGP SIGNATURE-----
Merge tag '9p-for-5.19-rc4' of https://github.com/martinetd/linux
Pull 9pfs fixes from Dominique Martinet:
"A couple of fid refcount and fscache fixes:
- fid refcounting was incorrect in some corner cases and would leak
resources, only freed at umount time. The first three commits fix
three such cases
- 'cache=loose' or fscache was broken when trying to write a partial
page to a file with no read permission since the rework a few
releases ago.
The fix taken here is just to restore old behavior of using the
special 'writeback_fid' for such reads, which is open as root/RDWR
and such not get complains that we try to read on a WRONLY fid.
Long-term it'd be nice to get rid of this and not issue the read at
all (skip cache?) in such cases, but that direction hasn't
progressed"
* tag '9p-for-5.19-rc4' of https://github.com/martinetd/linux:
9p: fix EBADF errors in cached mode
9p: Fix refcounting during full path walks for fid lookups
9p: fix fid refcount leak in v9fs_vfs_get_link
9p: fix fid refcount leak in v9fs_vfs_atomic_open_dotl
We have re-polling for partial IO, so a request can be polled twice. If
it used two poll entries the first time then on the second
io_arm_poll_handler() it will find the old apoll entry and NULL
kmalloc()'ed second entry, i.e. apoll->double_poll, so leaking it.
Fixes: 10c873334f ("io_uring: allow re-poll if we made progress")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/fee2452494222ecc7f1f88c8fb659baef971414a.1655852245.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=eORM
-----END PGP SIGNATURE-----
Merge tag 'for-5.19-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- print more error messages for invalid mount option values
- prevent remount with v1 space cache for subpage filesystem
- fix hang during unmount when block group reclaim task is running
* tag 'for-5.19-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: add error messages to all unrecognized mount options
btrfs: prevent remounting to v1 space cache for subpage mount
btrfs: fix hang during unmount when block group reclaim task is running
The recent patch to make afs_getattr consult the server didn't account
for the pseudo-inodes employed by the dynamic root-type afs superblock
not having a volume or a server to access, and thus an oops occurs if
such a directory is stat'd.
Fix this by checking to see if the vnode->volume pointer actually points
anywhere before following it in afs_getattr().
This can be tested by stat'ing a directory in /afs. It may be
sufficient just to do "ls /afs" and the oops looks something like:
BUG: kernel NULL pointer dereference, address: 0000000000000020
...
RIP: 0010:afs_getattr+0x8b/0x14b
...
Call Trace:
<TASK>
vfs_statx+0x79/0xf5
vfs_fstatat+0x49/0x62
Fixes: 2aeb8c86d4 ("afs: Fix afs_getattr() to refetch file status if callback break occurred")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/165408450783.1031787.7941404776393751186.stgit@warthog.procyon.org.uk/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Otherwise, we can get a wrong cp_error mark.
Cc: <stable@vger.kernel.org>
Fixes: a7b8618aa2 ("f2fs: avoid infinite loop to flush node pages")
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
apoll_events should be set once in the beginning of poll arming just as
poll->events and not change after. However, currently io_uring resets it
on each __io_poll_execute() for no clear reason. There is also a place
in __io_arm_poll_handler() where we add EPOLLONESHOT to downgrade a
multishot, but forget to do the same thing with ->apoll_events, which is
buggy.
Fixes: 81459350d5 ("io_uring: cache req->apoll->events in req->cflags")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Hao Xu <howeyxu@tencent.com>
Link: https://lore.kernel.org/r/0aef40399ba75b1a4d2c2e85e6e8fd93c02fc6e4.1655814213.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
