forked from Minki/linux
8197b053a8
20 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
David Howells
|
d64f4554dd |
fscache: Provide a means to begin an operation
Provide a function to begin a read operation: int fscache_begin_read_operation( struct netfs_cache_resources *cres, struct fscache_cookie *cookie) This is primarily intended to be called by network filesystems on behalf of netfslib, but may also be called to use the I/O access functions directly. It attaches the resources required by the cache to cres struct from the supplied cookie. This holds access to the cache behind the cookie for the duration of the operation and forces cache withdrawal and cookie invalidation to perform synchronisation on the operation. cres->inval_counter is set from the cookie at this point so that it can be compared at the end of the operation. Note that this does not guarantee that the cache state is fully set up and able to perform I/O immediately; looking up and creation may be left in progress in the background. The operations intended to be called by the network filesystem, such as reading and writing, are expected to wait for the cookie to move to the correct state. This will, however, potentially sleep, waiting for a certain minimum state to be set or for operations such as invalidate to advance far enough that I/O can resume. Also provide a function for the cache to call to wait for the cache object to get to a state where it can be used for certain things: bool fscache_wait_for_operation(struct netfs_cache_resources *cres, enum fscache_want_stage stage); This looks at the cache resources provided by the begin function and waits for them to get to an appropriate stage. There's a choice of wanting just some parameters (FSCACHE_WANT_PARAM) or the ability to do I/O (FSCACHE_WANT_READ or FSCACHE_WANT_WRITE). Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: linux-cachefs@redhat.com Link: https://lore.kernel.org/r/163819603692.215744.146724961588817028.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/163906910672.143852.13856103384424986357.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/163967110245.1823006.2239170567540431836.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/164021513617.640689.16627329360866150606.stgit@warthog.procyon.org.uk/ # v4 |
||
|
David Howells
|
7f3283aba3 |
fscache: Implement cookie registration
Add functions to the fscache API to allow data file cookies to be acquired and relinquished by the network filesystem. It is intended that the filesystem will create such cookies per-inode under a volume. To request a cookie, the filesystem should call: struct fscache_cookie * fscache_acquire_cookie(struct fscache_volume *volume, u8 advice, const void *index_key, size_t index_key_len, const void *aux_data, size_t aux_data_len, loff_t object_size) The filesystem must first have created a volume cookie, which is passed in here. If it passes in NULL then the function will just return a NULL cookie. A binary key should be passed in index_key and is of size index_key_len. This is saved in the cookie and is used to locate the associated data in the cache. A coherency data buffer of size aux_data_len will be allocated and initialised from the buffer pointed to by aux_data. This is used to validate cache objects when they're opened and is stored on disk with them when they're committed. The data is stored in the cookie and will be updateable by various functions in later patches. The object_size must also be given. This is also used to perform a coherency check and to size the backing storage appropriately. This function disallows a cookie from being acquired twice in parallel, though it will cause the second user to wait if the first is busy relinquishing its cookie. When a network filesystem has finished with a cookie, it should call: void fscache_relinquish_cookie(struct fscache_volume *volume, bool retire) If retire is true, any backing data will be discarded immediately. Changes ======= ver #3: - fscache_hash()'s size parameter is now in bytes. Use __le32 as the unit to round up to. - When comparing cookies, simply see if the attributes are the same rather than subtracting them to produce a strcmp-style return[1]. - Add a check to see if the cookie is still hashed at the point of freeing. ver #2: - Don't hold n_accesses elevated whilst cache is bound to a cookie, but rather add a flag that prevents the state machine from being queued when n_accesses reaches 0. - Remove the unused cookie pointer field from the fscache_acquire tracepoint. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: linux-cachefs@redhat.com Link: https://lore.kernel.org/r/CAHk-=whtkzB446+hX0zdLsdcUJsJ=8_-0S1mE_R+YurThfUbLA@mail.gmail.com/ [1] Link: https://lore.kernel.org/r/163819590658.215744.14934902514281054323.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/163906891983.143852.6219772337558577395.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/163967088507.1823006.12659006350221417165.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/164021498432.640689.12743483856927722772.stgit@warthog.procyon.org.uk/ # v4 |
||
|
David Howells
|
62ab633523 |
fscache: Implement volume registration
Add functions to the fscache API to allow volumes to be acquired and relinquished by the network filesystem. A volume is an index of data storage cache objects. A volume is represented by a volume cookie in the API. A filesystem would typically create a volume for a superblock and then create per-inode cookies within it. To request a volume, the filesystem calls: struct fscache_volume * fscache_acquire_volume(const char *volume_key, const char *cache_name, const void *coherency_data, size_t coherency_len) The volume_key is a printable string used to match the volume in the cache. It should not contain any '/' characters. For AFS, for example, this would be "afs,<cellname>,<volume_id>", e.g. "afs,example.com,523001". The cache_name can be NULL, but if not it should be a string indicating the name of the cache to use if there's more than one available. The coherency data, if given, is an arbitrarily-sized blob that's attached to the volume and is compared when the volume is looked up. If it doesn't match, the old volume is judged to be out of date and it and everything within it is discarded. Acquiring a volume twice concurrently is disallowed, though the function will wait if an old volume cookie is being relinquishing. When a network filesystem has finished with a volume, it should return the volume cookie by calling: void fscache_relinquish_volume(struct fscache_volume *volume, const void *coherency_data, bool invalidate) If invalidate is true, the entire volume will be discarded; if false, the volume will be synced and the coherency data will be updated. Changes ======= ver #4: - Removed an extraneous param from kdoc on fscache_relinquish_volume()[3]. ver #3: - fscache_hash()'s size parameter is now in bytes. Use __le32 as the unit to round up to. - When comparing cookies, simply see if the attributes are the same rather than subtracting them to produce a strcmp-style return[2]. - Make the coherency data an arbitrary blob rather than a u64, but don't store it for the moment. ver #2: - Fix error check[1]. - Make a fscache_acquire_volume() return errors, including EBUSY if a conflicting volume cookie already exists. No error is printed now - that's left to the netfs. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: linux-cachefs@redhat.com Link: https://lore.kernel.org/r/20211203095608.GC2480@kili/ [1] Link: https://lore.kernel.org/r/CAHk-=whtkzB446+hX0zdLsdcUJsJ=8_-0S1mE_R+YurThfUbLA@mail.gmail.com/ [2] Link: https://lore.kernel.org/r/20211220224646.30e8205c@canb.auug.org.au/ [3] Link: https://lore.kernel.org/r/163819588944.215744.1629085755564865996.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/163906890630.143852.13972180614535611154.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/163967086836.1823006.8191672796841981763.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/164021495816.640689.4403156093668590217.stgit@warthog.procyon.org.uk/ # v4 |
||
|
David Howells
|
9549332df4 |
fscache: Implement cache registration
Implement a register of caches and provide functions to manage it.
Two functions are provided for the cache backend to use:
(1) Acquire a cache cookie:
struct fscache_cache *fscache_acquire_cache(const char *name)
This gets the cache cookie for a cache of the specified name and moves
it to the preparation state. If a nameless cache cookie exists, that
will be given this name and used.
(2) Relinquish a cache cookie:
void fscache_relinquish_cache(struct fscache_cache *cache);
This relinquishes a cache cookie, cleans it and makes it available if
it's still referenced by a network filesystem.
Note that network filesystems don't deal with cache cookies directly, but
rather go straight to the volume registration.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
Link: https://lore.kernel.org/r/163819587157.215744.13523139317322503286.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/163906889665.143852.10378009165231294456.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/163967085081.1823006.2218944206363626210.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/164021494847.640689.10109692261640524343.stgit@warthog.procyon.org.uk/ # v4
|
||
|
David Howells
|
1e1236b841 |
fscache: Introduce new driver
Introduce basic skeleton of the new, rewritten fscache driver. Changes ======= ver #3: - Use remove_proc_subtree(), not remove_proc_entry() to remove a populated dir. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: linux-cachefs@redhat.com Link: https://lore.kernel.org/r/163819584034.215744.4290533472390439030.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/163906887770.143852.3577888294989185666.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/163967080039.1823006.5702921801104057922.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/164021491014.640689.4292699878317589512.stgit@warthog.procyon.org.uk/ # v4 |
||
|
David Howells
|
2cee6fbb7f |
fscache: Remove the contents of the fscache driver, pending rewrite
Remove the code that comprises the fscache driver as it's going to be substantially rewritten, with the majority of the code being erased in the rewrite. A small piece of linux/fscache.h is left as that is #included by a bunch of network filesystems. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: linux-cachefs@redhat.com Link: https://lore.kernel.org/r/163819578724.215744.18210619052245724238.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/163906884814.143852.6727245089843862889.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/163967077097.1823006.1377665951499979089.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/164021485548.640689.13876080567388696162.stgit@warthog.procyon.org.uk/ # v4 |
||
|
David Howells
|
58f386a73f |
fscache: Remove the object list procfile
Remove the object list procfile from fscache as objects will become entirely internal to the cache. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> cc: linux-cachefs@redhat.com Link: https://lore.kernel.org/r/162431198332.2908479.5847286163455099669.stgit@warthog.procyon.org.uk/ |
||
|
David Howells
|
6ae9bd8bb0 |
fscache, cachefiles: Remove the histogram stuff
Remove the histogram stuff as it's mostly going to be outdated. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> cc: linux-cachefs@redhat.com Link: https://lore.kernel.org/r/162431195953.2908479.16770977195634296638.stgit@warthog.procyon.org.uk/ |
||
|
David Howells
|
26aaeffcaf |
fscache, cachefiles: Add alternate API to use kiocb for read/write to cache
Add an alternate API by which the cache can be accessed through a kiocb, doing async DIO, rather than using the current API that tells the cache where all the pages are. The new API is intended to be used in conjunction with the netfs helper library. A filesystem must pick one or the other and not mix them. Filesystems wanting to use the new API must #define FSCACHE_USE_NEW_IO_API before #including the header. This prevents them from continuing to use the old API at the same time as there are incompatibilities in how the PG_fscache page bit is used. Changes: v6: - Provide a routine to shape a write so that the start and length can be aligned for DIO[3]. v4: - Use the vfs_iocb_iter_read/write() helpers[1] - Move initial definition of fscache_begin_read_operation() here. - Remove a commented-out line[2] - Combine ki->term_func calls in cachefiles_read_complete()[2]. - Remove explicit NULL initialiser[2]. - Remove extern on func decl[2]. - Put in param names on func decl[2]. - Remove redundant else[2]. - Fill out the kdoc comment for fscache_begin_read_operation(). - Rename fs/fscache/page2.c to io.c to match later patches. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-and-tested-by: Jeff Layton <jlayton@kernel.org> Tested-by: Dave Wysochanski <dwysocha@redhat.com> Tested-By: Marc Dionne <marc.dionne@auristor.com> cc: Christoph Hellwig <hch@lst.de> cc: linux-cachefs@redhat.com cc: linux-afs@lists.infradead.org cc: linux-nfs@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: ceph-devel@vger.kernel.org cc: v9fs-developer@lists.sourceforge.net cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20210216102614.GA27555@lst.de/ [1] Link: https://lore.kernel.org/r/20210216084230.GA23669@lst.de/ [2] Link: https://lore.kernel.org/r/161781047695.463527.7463536103593997492.stgit@warthog.procyon.org.uk/ [3] Link: https://lore.kernel.org/r/161118142558.1232039.17993829899588971439.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161161037850.2537118.8819808229350326503.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/161340402057.1303470.8038373593844486698.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/161539545919.286939.14573472672781434757.stgit@warthog.procyon.org.uk/ # v4 Link: https://lore.kernel.org/r/161653801477.2770958.10543270629064934227.stgit@warthog.procyon.org.uk/ # v5 Link: https://lore.kernel.org/r/161789084517.6155.12799689829859169640.stgit@warthog.procyon.org.uk/ # v6 |
||
Greg Kroah-Hartman
|
b24413180f |
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
David Howells
|
4fbf4291aa |
FS-Cache: Allow the current state of all objects to be dumped
Allow the current state of all fscache objects to be dumped by doing: cat /proc/fs/fscache/objects By default, all objects and all fields will be shown. This can be restricted by adding a suitable key to one of the caller's keyrings (such as the session keyring): keyctl add user fscache:objlist "<restrictions>" @s The <restrictions> are: K Show hexdump of object key (don't show if not given) A Show hexdump of object aux data (don't show if not given) And paired restrictions: C Show objects that have a cookie c Show objects that don't have a cookie B Show objects that are busy b Show objects that aren't busy W Show objects that have pending writes w Show objects that don't have pending writes R Show objects that have outstanding reads r Show objects that don't have outstanding reads S Show objects that have slow work queued s Show objects that don't have slow work queued If neither side of a restriction pair is given, then both are implied. For example: keyctl add user fscache:objlist KB @s shows objects that are busy, and lists their object keys, but does not dump their auxiliary data. It also implies "CcWwRrSs", but as 'B' is given, 'b' is not implied. Signed-off-by: David Howells <dhowells@redhat.com> |
||
|
David Howells
|
b510882281 |
FS-Cache: Implement data I/O part of netfs API
Implement the data I/O part of the FS-Cache netfs API. The documentation and
API header file were added in a previous patch.
This patch implements the following functions for the netfs to call:
(*) fscache_attr_changed().
Indicate that the object has changed its attributes. The only attribute
currently recorded is the file size. Only pages within the set file size
will be stored in the cache.
This operation is submitted for asynchronous processing, and will return
immediately. It will return -ENOMEM if an out of memory error is
encountered, -ENOBUFS if the object is not actually cached, or 0 if the
operation is successfully queued.
(*) fscache_read_or_alloc_page().
(*) fscache_read_or_alloc_pages().
Request data be fetched from the disk, and allocate internal metadata to
track the netfs pages and reserve disk space for unknown pages.
These operations perform semi-asynchronous data reads. Upon returning
they will indicate which pages they think can be retrieved from disk, and
will have set in progress attempts to retrieve those pages.
These will return, in order of preference, -ENOMEM on memory allocation
error, -ERESTARTSYS if a signal interrupted proceedings, -ENODATA if one
or more requested pages are not yet cached, -ENOBUFS if the object is not
actually cached or if there isn't space for future pages to be cached on
this object, or 0 if successful.
In the case of the multipage function, the pages for which reads are set
in progress will be removed from the list and the page count decreased
appropriately.
If any read operations should fail, the completion function will be given
an error, and will also be passed contextual information to allow the
netfs to fall back to querying the server for the absent pages.
For each successful read, the page completion function will also be
called.
Any pages subsequently tracked by the cache will have PG_fscache set upon
them on return. fscache_uncache_page() must be called for such pages.
If supplied by the netfs, the mark_pages_cached() cookie op will be
invoked for any pages now tracked.
(*) fscache_alloc_page().
Allocate internal metadata to track a netfs page and reserve disk space.
This will return -ENOMEM on memory allocation error, -ERESTARTSYS on
signal, -ENOBUFS if the object isn't cached, or there isn't enough space
in the cache, or 0 if successful.
Any pages subsequently tracked by the cache will have PG_fscache set upon
them on return. fscache_uncache_page() must be called for such pages.
If supplied by the netfs, the mark_pages_cached() cookie op will be
invoked for any pages now tracked.
(*) fscache_write_page().
Request data be stored to disk. This may only be called on pages that
have been read or alloc'd by the above three functions and have not yet
been uncached.
This will return -ENOMEM on memory allocation error, -ERESTARTSYS on
signal, -ENOBUFS if the object isn't cached, or there isn't immediately
enough space in the cache, or 0 if successful.
On a successful return, this operation will have queued the page for
asynchronous writing to the cache. The page will be returned with
PG_fscache_write set until the write completes one way or another. The
caller will not be notified if the write fails due to an I/O error. If
that happens, the object will become available and all pending writes will
be aborted.
Note that the cache may batch up page writes, and so it may take a while
to get around to writing them out.
The caller must assume that until PG_fscache_write is cleared the page is
use by the cache. Any changes made to the page may be reflected on disk.
The page may even be under DMA.
(*) fscache_uncache_page().
Indicate that the cache should stop tracking a page previously read or
alloc'd from the cache. If the page was alloc'd only, but unwritten, it
will not appear on disk.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Steve Dickson <steved@redhat.com>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Daire Byrne <Daire.Byrne@framestore.com>
|
||
|
David Howells
|
952efe7b78 |
FS-Cache: Add and document asynchronous operation handling
Add and document asynchronous operation handling for use by FS-Cache's data
storage and retrieval routines.
The following documentation is added to:
Documentation/filesystems/caching/operations.txt
================================
ASYNCHRONOUS OPERATIONS HANDLING
================================
========
OVERVIEW
========
FS-Cache has an asynchronous operations handling facility that it uses for its
data storage and retrieval routines. Its operations are represented by
fscache_operation structs, though these are usually embedded into some other
structure.
This facility is available to and expected to be be used by the cache backends,
and FS-Cache will create operations and pass them off to the appropriate cache
backend for completion.
To make use of this facility, <linux/fscache-cache.h> should be #included.
===============================
OPERATION RECORD INITIALISATION
===============================
An operation is recorded in an fscache_operation struct:
struct fscache_operation {
union {
struct work_struct fast_work;
struct slow_work slow_work;
};
unsigned long flags;
fscache_operation_processor_t processor;
...
};
Someone wanting to issue an operation should allocate something with this
struct embedded in it. They should initialise it by calling:
void fscache_operation_init(struct fscache_operation *op,
fscache_operation_release_t release);
with the operation to be initialised and the release function to use.
The op->flags parameter should be set to indicate the CPU time provision and
the exclusivity (see the Parameters section).
The op->fast_work, op->slow_work and op->processor flags should be set as
appropriate for the CPU time provision (see the Parameters section).
FSCACHE_OP_WAITING may be set in op->flags prior to each submission of the
operation and waited for afterwards.
==========
PARAMETERS
==========
There are a number of parameters that can be set in the operation record's flag
parameter. There are three options for the provision of CPU time in these
operations:
(1) The operation may be done synchronously (FSCACHE_OP_MYTHREAD). A thread
may decide it wants to handle an operation itself without deferring it to
another thread.
This is, for example, used in read operations for calling readpages() on
the backing filesystem in CacheFiles. Although readpages() does an
asynchronous data fetch, the determination of whether pages exist is done
synchronously - and the netfs does not proceed until this has been
determined.
If this option is to be used, FSCACHE_OP_WAITING must be set in op->flags
before submitting the operation, and the operating thread must wait for it
to be cleared before proceeding:
wait_on_bit(&op->flags, FSCACHE_OP_WAITING,
fscache_wait_bit, TASK_UNINTERRUPTIBLE);
(2) The operation may be fast asynchronous (FSCACHE_OP_FAST), in which case it
will be given to keventd to process. Such an operation is not permitted
to sleep on I/O.
This is, for example, used by CacheFiles to copy data from a backing fs
page to a netfs page after the backing fs has read the page in.
If this option is used, op->fast_work and op->processor must be
initialised before submitting the operation:
INIT_WORK(&op->fast_work, do_some_work);
(3) The operation may be slow asynchronous (FSCACHE_OP_SLOW), in which case it
will be given to the slow work facility to process. Such an operation is
permitted to sleep on I/O.
This is, for example, used by FS-Cache to handle background writes of
pages that have just been fetched from a remote server.
If this option is used, op->slow_work and op->processor must be
initialised before submitting the operation:
fscache_operation_init_slow(op, processor)
Furthermore, operations may be one of two types:
(1) Exclusive (FSCACHE_OP_EXCLUSIVE). Operations of this type may not run in
conjunction with any other operation on the object being operated upon.
An example of this is the attribute change operation, in which the file
being written to may need truncation.
(2) Shareable. Operations of this type may be running simultaneously. It's
up to the operation implementation to prevent interference between other
operations running at the same time.
=========
PROCEDURE
=========
Operations are used through the following procedure:
(1) The submitting thread must allocate the operation and initialise it
itself. Normally this would be part of a more specific structure with the
generic op embedded within.
(2) The submitting thread must then submit the operation for processing using
one of the following two functions:
int fscache_submit_op(struct fscache_object *object,
struct fscache_operation *op);
int fscache_submit_exclusive_op(struct fscache_object *object,
struct fscache_operation *op);
The first function should be used to submit non-exclusive ops and the
second to submit exclusive ones. The caller must still set the
FSCACHE_OP_EXCLUSIVE flag.
If successful, both functions will assign the operation to the specified
object and return 0. -ENOBUFS will be returned if the object specified is
permanently unavailable.
The operation manager will defer operations on an object that is still
undergoing lookup or creation. The operation will also be deferred if an
operation of conflicting exclusivity is in progress on the object.
If the operation is asynchronous, the manager will retain a reference to
it, so the caller should put their reference to it by passing it to:
void fscache_put_operation(struct fscache_operation *op);
(3) If the submitting thread wants to do the work itself, and has marked the
operation with FSCACHE_OP_MYTHREAD, then it should monitor
FSCACHE_OP_WAITING as described above and check the state of the object if
necessary (the object might have died whilst the thread was waiting).
When it has finished doing its processing, it should call
fscache_put_operation() on it.
(4) The operation holds an effective lock upon the object, preventing other
exclusive ops conflicting until it is released. The operation can be
enqueued for further immediate asynchronous processing by adjusting the
CPU time provisioning option if necessary, eg:
op->flags &= ~FSCACHE_OP_TYPE;
op->flags |= ~FSCACHE_OP_FAST;
and calling:
void fscache_enqueue_operation(struct fscache_operation *op)
This can be used to allow other things to have use of the worker thread
pools.
=====================
ASYNCHRONOUS CALLBACK
=====================
When used in asynchronous mode, the worker thread pool will invoke the
processor method with a pointer to the operation. This should then get at the
container struct by using container_of():
static void fscache_write_op(struct fscache_operation *_op)
{
struct fscache_storage *op =
container_of(_op, struct fscache_storage, op);
...
}
The caller holds a reference on the operation, and will invoke
fscache_put_operation() when the processor function returns. The processor
function is at liberty to call fscache_enqueue_operation() or to take extra
references.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Steve Dickson <steved@redhat.com>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Daire Byrne <Daire.Byrne@framestore.com>
|
||
|
David Howells
|
36c9559022 |
FS-Cache: Object management state machine
Implement the cache object management state machine.
The following documentation is added to illuminate the working of this state
machine. It will also be added as:
Documentation/filesystems/caching/object.txt
====================================================
IN-KERNEL CACHE OBJECT REPRESENTATION AND MANAGEMENT
====================================================
==============
REPRESENTATION
==============
FS-Cache maintains an in-kernel representation of each object that a netfs is
currently interested in. Such objects are represented by the fscache_cookie
struct and are referred to as cookies.
FS-Cache also maintains a separate in-kernel representation of the objects that
a cache backend is currently actively caching. Such objects are represented by
the fscache_object struct. The cache backends allocate these upon request, and
are expected to embed them in their own representations. These are referred to
as objects.
There is a 1:N relationship between cookies and objects. A cookie may be
represented by multiple objects - an index may exist in more than one cache -
or even by no objects (it may not be cached).
Furthermore, both cookies and objects are hierarchical. The two hierarchies
correspond, but the cookies tree is a superset of the union of the object trees
of multiple caches:
NETFS INDEX TREE : CACHE 1 : CACHE 2
: :
: +-----------+ :
+----------->| IObject | :
+-----------+ | : +-----------+ :
| ICookie |-------+ : | :
+-----------+ | : | : +-----------+
| +------------------------------>| IObject |
| : | : +-----------+
| : V : |
| : +-----------+ : |
V +----------->| IObject | : |
+-----------+ | : +-----------+ : |
| ICookie |-------+ : | : V
+-----------+ | : | : +-----------+
| +------------------------------>| IObject |
+-----+-----+ : | : +-----------+
| | : | : |
V | : V : |
+-----------+ | : +-----------+ : |
| ICookie |------------------------->| IObject | : |
+-----------+ | : +-----------+ : |
| V : | : V
| +-----------+ : | : +-----------+
| | ICookie |-------------------------------->| IObject |
| +-----------+ : | : +-----------+
V | : V : |
+-----------+ | : +-----------+ : |
| DCookie |------------------------->| DObject | : |
+-----------+ | : +-----------+ : |
| : : |
+-------+-------+ : : |
| | : : |
V V : : V
+-----------+ +-----------+ : : +-----------+
| DCookie | | DCookie |------------------------>| DObject |
+-----------+ +-----------+ : : +-----------+
: :
In the above illustration, ICookie and IObject represent indices and DCookie
and DObject represent data storage objects. Indices may have representation in
multiple caches, but currently, non-index objects may not. Objects of any type
may also be entirely unrepresented.
As far as the netfs API goes, the netfs is only actually permitted to see
pointers to the cookies. The cookies themselves and any objects attached to
those cookies are hidden from it.
===============================
OBJECT MANAGEMENT STATE MACHINE
===============================
Within FS-Cache, each active object is managed by its own individual state
machine. The state for an object is kept in the fscache_object struct, in
object->state. A cookie may point to a set of objects that are in different
states.
Each state has an action associated with it that is invoked when the machine
wakes up in that state. There are four logical sets of states:
(1) Preparation: states that wait for the parent objects to become ready. The
representations are hierarchical, and it is expected that an object must
be created or accessed with respect to its parent object.
(2) Initialisation: states that perform lookups in the cache and validate
what's found and that create on disk any missing metadata.
(3) Normal running: states that allow netfs operations on objects to proceed
and that update the state of objects.
(4) Termination: states that detach objects from their netfs cookies, that
delete objects from disk, that handle disk and system errors and that free
up in-memory resources.
In most cases, transitioning between states is in response to signalled events.
When a state has finished processing, it will usually set the mask of events in
which it is interested (object->event_mask) and relinquish the worker thread.
Then when an event is raised (by calling fscache_raise_event()), if the event
is not masked, the object will be queued for processing (by calling
fscache_enqueue_object()).
PROVISION OF CPU TIME
---------------------
The work to be done by the various states is given CPU time by the threads of
the slow work facility (see Documentation/slow-work.txt). This is used in
preference to the workqueue facility because:
(1) Threads may be completely occupied for very long periods of time by a
particular work item. These state actions may be doing sequences of
synchronous, journalled disk accesses (lookup, mkdir, create, setxattr,
getxattr, truncate, unlink, rmdir, rename).
(2) Threads may do little actual work, but may rather spend a lot of time
sleeping on I/O. This means that single-threaded and 1-per-CPU-threaded
workqueues don't necessarily have the right numbers of threads.
LOCKING SIMPLIFICATION
----------------------
Because only one worker thread may be operating on any particular object's
state machine at once, this simplifies the locking, particularly with respect
to disconnecting the netfs's representation of a cache object (fscache_cookie)
from the cache backend's representation (fscache_object) - which may be
requested from either end.
=================
THE SET OF STATES
=================
The object state machine has a set of states that it can be in. There are
preparation states in which the object sets itself up and waits for its parent
object to transit to a state that allows access to its children:
(1) State FSCACHE_OBJECT_INIT.
Initialise the object and wait for the parent object to become active. In
the cache, it is expected that it will not be possible to look an object
up from the parent object, until that parent object itself has been looked
up.
There are initialisation states in which the object sets itself up and accesses
disk for the object metadata:
(2) State FSCACHE_OBJECT_LOOKING_UP.
Look up the object on disk, using the parent as a starting point.
FS-Cache expects the cache backend to probe the cache to see whether this
object is represented there, and if it is, to see if it's valid (coherency
management).
The cache should call fscache_object_lookup_negative() to indicate lookup
failure for whatever reason, and should call fscache_obtained_object() to
indicate success.
At the completion of lookup, FS-Cache will let the netfs go ahead with
read operations, no matter whether the file is yet cached. If not yet
cached, read operations will be immediately rejected with ENODATA until
the first known page is uncached - as to that point there can be no data
to be read out of the cache for that file that isn't currently also held
in the pagecache.
(3) State FSCACHE_OBJECT_CREATING.
Create an object on disk, using the parent as a starting point. This
happens if the lookup failed to find the object, or if the object's
coherency data indicated what's on disk is out of date. In this state,
FS-Cache expects the cache to create
The cache should call fscache_obtained_object() if creation completes
successfully, fscache_object_lookup_negative() otherwise.
At the completion of creation, FS-Cache will start processing write
operations the netfs has queued for an object. If creation failed, the
write ops will be transparently discarded, and nothing recorded in the
cache.
There are some normal running states in which the object spends its time
servicing netfs requests:
(4) State FSCACHE_OBJECT_AVAILABLE.
A transient state in which pending operations are started, child objects
are permitted to advance from FSCACHE_OBJECT_INIT state, and temporary
lookup data is freed.
(5) State FSCACHE_OBJECT_ACTIVE.
The normal running state. In this state, requests the netfs makes will be
passed on to the cache.
(6) State FSCACHE_OBJECT_UPDATING.
The state machine comes here to update the object in the cache from the
netfs's records. This involves updating the auxiliary data that is used
to maintain coherency.
And there are terminal states in which an object cleans itself up, deallocates
memory and potentially deletes stuff from disk:
(7) State FSCACHE_OBJECT_LC_DYING.
The object comes here if it is dying because of a lookup or creation
error. This would be due to a disk error or system error of some sort.
Temporary data is cleaned up, and the parent is released.
(8) State FSCACHE_OBJECT_DYING.
The object comes here if it is dying due to an error, because its parent
cookie has been relinquished by the netfs or because the cache is being
withdrawn.
Any child objects waiting on this one are given CPU time so that they too
can destroy themselves. This object waits for all its children to go away
before advancing to the next state.
(9) State FSCACHE_OBJECT_ABORT_INIT.
The object comes to this state if it was waiting on its parent in
FSCACHE_OBJECT_INIT, but its parent died. The object will destroy itself
so that the parent may proceed from the FSCACHE_OBJECT_DYING state.
(10) State FSCACHE_OBJECT_RELEASING.
(11) State FSCACHE_OBJECT_RECYCLING.
The object comes to one of these two states when dying once it is rid of
all its children, if it is dying because the netfs relinquished its
cookie. In the first state, the cached data is expected to persist, and
in the second it will be deleted.
(12) State FSCACHE_OBJECT_WITHDRAWING.
The object transits to this state if the cache decides it wants to
withdraw the object from service, perhaps to make space, but also due to
error or just because the whole cache is being withdrawn.
(13) State FSCACHE_OBJECT_DEAD.
The object transits to this state when the in-memory object record is
ready to be deleted. The object processor shouldn't ever see an object in
this state.
THE SET OF EVENTS
-----------------
There are a number of events that can be raised to an object state machine:
(*) FSCACHE_OBJECT_EV_UPDATE
The netfs requested that an object be updated. The state machine will ask
the cache backend to update the object, and the cache backend will ask the
netfs for details of the change through its cookie definition ops.
(*) FSCACHE_OBJECT_EV_CLEARED
This is signalled in two circumstances:
(a) when an object's last child object is dropped and
(b) when the last operation outstanding on an object is completed.
This is used to proceed from the dying state.
(*) FSCACHE_OBJECT_EV_ERROR
This is signalled when an I/O error occurs during the processing of some
object.
(*) FSCACHE_OBJECT_EV_RELEASE
(*) FSCACHE_OBJECT_EV_RETIRE
These are signalled when the netfs relinquishes a cookie it was using.
The event selected depends on whether the netfs asks for the backing
object to be retired (deleted) or retained.
(*) FSCACHE_OBJECT_EV_WITHDRAW
This is signalled when the cache backend wants to withdraw an object.
This means that the object will have to be detached from the netfs's
cookie.
Because the withdrawing releasing/retiring events are all handled by the object
state machine, it doesn't matter if there's a collision with both ends trying
to sever the connection at the same time. The state machine can just pick
which one it wants to honour, and that effects the other.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Steve Dickson <steved@redhat.com>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Daire Byrne <Daire.Byrne@framestore.com>
|
||
|
David Howells
|
726dd7ff10 |
FS-Cache: Add netfs registration
Add functions to register and unregister a network filesystem or other client of the FS-Cache service. This allocates and releases the cookie representing the top-level index for a netfs, and makes it available to the netfs. If the FS-Cache facility is disabled, then the calls are optimised away at compile time. Note that whilst this patch may appear to work with FS-Cache enabled and a netfs attempting to use it, it will leak the cookie it allocates for the netfs as fscache_relinquish_cookie() is implemented in a later patch. This will cause the slab code to emit a warning when the module is removed. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Steve Dickson <steved@redhat.com> Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Tested-by: Daire Byrne <Daire.Byrne@framestore.com> |
||
|
David Howells
|
955d00917f |
FS-Cache: Provide a slab for cookie allocation
Provide a slab from which can be allocated the FS-Cache cookies that will be presented to the netfs. Also provide a slab constructor and a function to recursively discard a cookie and its ancestor chain. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Steve Dickson <steved@redhat.com> Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Tested-by: Daire Byrne <Daire.Byrne@framestore.com> |
||
|
David Howells
|
0e04d4cefc |
FS-Cache: Add cache tag handling
Implement two features of FS-Cache:
(1) The ability to request and release cache tags - names by which a cache may
be known to a netfs, and thus selected for use.
(2) An internal function by which a cache is selected by consulting the netfs,
if the netfs wishes to be consulted.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Steve Dickson <steved@redhat.com>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Daire Byrne <Daire.Byrne@framestore.com>
|
||
|
David Howells
|
a6891645cf |
FS-Cache: Root index definition
Add a description of the root index of the cache for later patches to make use
of.
The root index is owned by FS-Cache itself. When a netfs requests caching
facilities, FS-Cache will, if one doesn't already exist, create an entry in
the root index with the key being the name of the netfs ("AFS" for example),
and the auxiliary data holding the index structure version supplied by the
netfs:
FSDEF
|
+-----------+
| |
NFS AFS
[v=1] [v=1]
If an entry with the appropriate name does already exist, the version is
compared. If the version is different, the entire subtree from that entry
will be discarded and a new entry created.
The new entry will be an index, and a cookie referring to it will be passed to
the netfs. This is then the root handle by which the netfs accesses the
cache. It can create whatever objects it likes in that index, including
further indices.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Steve Dickson <steved@redhat.com>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Daire Byrne <Daire.Byrne@framestore.com>
|
||
|
David Howells
|
7394daa8c6 |
FS-Cache: Add use of /proc and presentation of statistics
Make FS-Cache create its /proc interface and present various statistical information through it. Also provide the functions for updating this information. These features are enabled by: CONFIG_FSCACHE_PROC CONFIG_FSCACHE_STATS CONFIG_FSCACHE_HISTOGRAM The /proc directory for FS-Cache is also exported so that caching modules can add their own statistics there too. The FS-Cache module is loadable at this point, and the statistics files can be examined by userspace: cat /proc/fs/fscache/stats cat /proc/fs/fscache/histogram Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Steve Dickson <steved@redhat.com> Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Tested-by: Daire Byrne <Daire.Byrne@framestore.com> |
||
|
David Howells
|
06b3db1b9b |
FS-Cache: Add main configuration option, module entry points and debugging
Add the main configuration option, allowing FS-Cache to be selected; the module entry and exit functions and the debugging stuff used by these patches. The two configuration options added are: CONFIG_FSCACHE CONFIG_FSCACHE_DEBUG The first enables the facility, and the second makes the debugging statements enableable through the "debug" module parameter. The value of this parameter is a bitmask as described in: Documentation/filesystems/caching/fscache.txt The module can be loaded at this point, but all it will do at this point in the patch series is to start up the slow work facility and shut it down again. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Steve Dickson <steved@redhat.com> Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Tested-by: Daire Byrne <Daire.Byrne@framestore.com> |