According to the data sheet the ambient sensor's scale is 0.12 lux/step
(not 0.024 lux/step as used by vcnl4200) when the integration time is
80ms. The integration time is currently hardcoded in the driver to that
value.
See p. 8 in https://www.vishay.com/docs/84307/designingvcnl4040.pdf
Fixes: 5a441aade5 ("iio: light: vcnl4000 add support for the VCNL4040 proximity and light sensor")
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Previous versions of `iio_compute_scan_bytes` only aligned each element
to its own length (i.e. its own natural alignment). Because multiple
consecutive sets of scan elements are buffered this does not work in
case the computed scan bytes do not align with the natural alignment of
the first scan element in the set.
This commit fixes this by aligning the scan bytes to the natural
alignment of the largest scan element in the set.
Fixes: 959d2952d1 ("staging:iio: make iio_sw_buffer_preenable much more general.")
Signed-off-by: Lars Möllendorf <lars.moellendorf@plating.de>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
IIO triggered buffer depends on IIO buffer which is missing from Kconfig
file. This should go unnoticed most of the time because there's a
chance something else has already enabled buffers. In some rare cases
though one might experience kbuild warnings about unmet direct
dependencies and build failures due to missing symbols.
Fix this by selecting IIO_BUFFER explicitly.
Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com>
Fixes: a1d642266c ("iio: chemical: add support for Plantower PMS7003 sensor")
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
At the moment, attempting to probe a device with ST_LSM6DS3_ID
(e.g. using the st,lsm6ds3 compatible) fails with:
st_lsm6dsx_i2c 1-006b: unsupported whoami [69]
... even though 0x69 is the whoami listed for ST_LSM6DS3_ID.
This happens because st_lsm6dsx_check_whoami() also attempts
to match unspecified (zero-initialized) entries in the "id" array.
ST_LSM6DS3_ID = 0 will therefore match any entry in
st_lsm6dsx_sensor_settings (here: the first), because none of them
actually have all 12 entries listed in the "id" array.
Avoid this by additionally checking if "name" is set,
which is only set for valid entries in the "id" array.
Note: Although the problem was introduced earlier it did not surface until
commit 52f4b1f196 ("iio: imu: st_lsm6dsx: add support for accel/gyro unit of lsm9ds1")
because ST_LSM6DS3_ID was the first entry in st_lsm6dsx_sensor_settings.
Fixes: d068e4a0f9 ("iio: imu: st_lsm6dsx: add support to multiple devices with the same settings")
Cc: <stable@vger.kernel.org> # 5.4
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes device tree channel configuration.
ad7124 driver reads channels configuration from the device tree.
It expects to find channel specifications as child nodes.
Before this patch ad7124 driver assumed that the child nodes are parsed
by for_each_available_child_of_node in the order 0,1,2,3...
This is wrong and the real order of the children can be seen by running:
dtc -I fs /sys/firmware/devicetree/base on the machine.
For example, running this on an rpi 3B+ yields the real
children order: 4,2,0,7,5,3,1,6
Before this patch the driver assigned the channel configuration
like this:
- 0 <- 4
- 1 <- 2
- 2 <- 0
........
For example, the symptoms can be observed by connecting the 4th channel
to a 1V tension and then reading the in_voltage0-voltage19_raw sysfs
(multiplied of course by the scale) one would see that channel 0
measures 1V and channel 4 measures only noise.
Now the driver uses the reg property of each child in order to
correctly identify to which channel the parsed configuration
belongs to.
Fixes b3af341bbd: ("iio: adc: Add ad7124 support")
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix a simple bug in rotating array index.
Fixes: b26bf6ab71 ("cpuidle: New timer events oriented governor for tickless systems")
Signed-off-by: Ikjoon Jang <ikjn@chromium.org>
Cc: 5.1+ <stable@vger.kernel.org> # 5.1+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some of ASUS laptops like UX431FL keyboard backlight cannot be set to
brightness 0. According to ASUS' information, the brightness should be
0x80 ~ 0x83. This patch fixes it by following the logic.
Fixes: e9809c0b96 ("asus-wmi: add keyboard backlight support")
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Reviewed-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
At failure of attempt to detect protocol extension, ALSA dice driver
should be fallback to limited functionality. However it's not.
This commit fixes it.
Cc: <stable@vger.kernel.org> # v4.18+
Fixes: 58579c056c ("ALSA: dice: use extended protocol to detect available stream formats")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200113084630.14305-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALSA firewire-tascam driver can bring corruption due to spin lock without
restoration of IRQ flag in SoftIRQ context. This commit fixes the bug.
Cc: Scott Bahling <sbahling@suse.com>
Cc: <stable@vger.kernel.org> # v4.21
Fixes: d716742243 ("ALSA: firewire-tascam: queue events for change of control surface")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200113085719.26788-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Adding new CML CPU model ID into platform driver support list.
Signed-off-by: Harry Pan <harry.pan@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Allow the user to configure the fan to turn on / speed-up at lower
thresholds then before (20 degrees Celcius as minimum instead of 40) and
likewise also allow the user to delay the fan speeding-up till the
temperature hits 90 degrees Celcius (was 70).
Cc: Jason Anderson <jasona.594@gmail.com>
Reported-by: Jason Anderson <jasona.594@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Use our default values when wrong module-parameters are given, instead of
refusing to load. Refusing to load leaves the fan at the BIOS default
setting, which is "Off". The CPU's thermal throttling should protect the
system from damage, but not-loading is really not the best fallback in this
case.
This commit fixes this by re-setting module-parameter values to their
defaults if they are out of range, instead of failing the probe with
-EINVAL.
Cc: stable@vger.kernel.org
Cc: Jason Anderson <jasona.594@gmail.com>
Reported-by: Jason Anderson <jasona.594@gmail.com>
Fixes: 594ce6db32 ("platform/x86: GPD pocket fan: Use a min-speed of 2 while charging")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
This commit fixes the potential deadlock caused by the console Rx
and Tx processing at the same time. Rx and Tx both take the console
and tmfifo spinlock but in different order which causes potential
deadlock. The fix is to use different tmfifo spinlock for Rx and
Tx since they protect different resources and it's safe to split
the lock.
Below is the reported call trace when copying/pasting large string
in the console.
Rx:
_raw_spin_lock_irqsave (hvc lock)
__hvc_poll
hvc_poll
in_intr
vring_interrupt
mlxbf_tmfifo_rxtx_one_desc (tmfifo lock)
mlxbf_tmfifo_rxtx
mlxbf_tmfifo_work_rxtx
Tx:
_raw_spin_lock_irqsave (tmfifo lock)
mlxbf_tmfifo_virtio_notify
virtqueue_notify
virtqueue_kick
put_chars
hvc_push
hvc_write (hvc lock)
...
do_tty_write
tty_write
Fixes: 1357dfd726 ("platform/mellanox: Add TmFifo driver for Mellanox BlueField Soc")
Cc: <stable@vger.kernel.org> # 5.4+
Reviewed-by: David Woods <dwoods@mellanox.com>
Signed-off-by: Liming Sun <lsun@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
This patch corrects the SPDX License Identifier style in
header files related to x86 Platform Specific Drivers.
For C header files Documentation/process/license-rules.rst
mandates C-like comments (opposed to C source files where
C++ style should be used).
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
When submitting a fenced command we must lock the object reservations
because virtio_gpu_queue_fenced_ctrl_buffer() unlocks after adding the
fence.
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Tested-by: Jann Horn <jannh@google.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200110094535.23472-1-kraxel@redhat.com
Two fixes for RISC-V:
- Clear FP registers during boot when FP support is present, rather than
when they aren't present
- Move the header files associated with the SiFive L2 cache controller
to drivers/soc (where the code was recently moved)
-----BEGIN PGP SIGNATURE-----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=qvPe
-----END PGP SIGNATURE-----
Merge tag 'riscv/for-v5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
"Two fixes for RISC-V:
- Clear FP registers during boot when FP support is present, rather
than when they aren't present
- Move the header files associated with the SiFive L2 cache
controller to drivers/soc (where the code was recently moved)"
* tag 'riscv/for-v5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fixup obvious bug for fp-regs reset
riscv: move sifive_l2_cache.h to include/soc
CSR_MISA is defined in Privileged Architectures' spec: 3.1.1 Machine
ISA Register misa. Every bit:1 indicate a feature, so we should beqz
reset_done when there is no F/D bit in csr_misa register.
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
[paul.walmsley@sifive.com: fix typo in commit message]
Fixes: 9e80635619 ("riscv: clear the instruction cache and all registers when booting")
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
The commit 9209fb5189 ("riscv: move sifive_l2_cache.c to drivers/soc")
moves the sifive L2 cache driver to driver/soc. It did not move the
header file along with the driver. Therefore this patch moves the header
file to driver/soc
Signed-off-by: Yash Shah <yash.shah@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
[paul.walmsley@sifive.com: updated to fix the include guard]
Fixes: 9209fb5189 ("riscv: move sifive_l2_cache.c to drivers/soc")
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Including:
- Two fixes for VT-d and generic IOMMU code to fix teardown on
error handling code paths.
- Patch for the Intel VT-d driver to fix handling of non-PCI
devices
- Fix W=1 compile warning in dma-iommu code
-----BEGIN PGP SIGNATURE-----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=rTxu
-----END PGP SIGNATURE-----
Merge tag 'iommu-fixes-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- Two fixes for VT-d and generic IOMMU code to fix teardown on error
handling code paths.
- Patch for the Intel VT-d driver to fix handling of non-PCI devices
- Fix W=1 compile warning in dma-iommu code
* tag 'iommu-fixes-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/dma: fix variable 'cookie' set but not used
iommu/vt-d: Unlink device if failed to add to group
iommu: Remove device link to group on failure
iommu/vt-d: Fix adding non-PCI devices to Intel IOMMU
For plain text output, it incorrectly prints the pointer value
"void *data". The "void *data" is actually pointing to memory that
contains a bpf-map's value. The intention is to print the content of
the bpf-map's value instead of printing the pointer pointing to the
bpf-map's value.
In this case, a member of the bpf-map's value is a pointer type.
Thus, it should print the "*(void **)data".
Fixes: 22c349e8db ("tools: bpftool: fix format strings and arguments for jsonw_printf()")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Link: https://lore.kernel.org/bpf/20200110231644.3484151-1-kafai@fb.com
Pull i2c fixes from Wolfram Sang:
"Two driver bugfixes, a documentation fix, and a removal of a spec
violation for the bus recovery algorithm in the core"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: fix bus recovery stop mode timing
i2c: bcm2835: Store pointer to bus clock
dt-bindings: i2c: at91: fix i2c-sda-hold-time-ns documentation for sam9x60
i2c: at91: fix clk_offset for sam9x60
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCXhhtDQAKCRCRxhvAZXjc
orQ3AQD7H2ovZbPIpWbwOnRIExBF4O8gPDfFc/J/RweZx40v/AD/QwfFnq0TpmUc
UfS4zzLxJ4K+L4RYWId5v8MFHGIu8QQ=
=LmmJ
-----END PGP SIGNATURE-----
Merge tag 'clone3-tls-v5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull thread fixes from Christian Brauner:
"This contains a series of patches to fix CLONE_SETTLS when used with
clone3().
The clone3() syscall passes the tls argument through struct clone_args
instead of a register. This means, all architectures that do not
implement copy_thread_tls() but still support CLONE_SETTLS via
copy_thread() expecting the tls to be located in a register argument
based on clone() are currently unfortunately broken. Their tls value
will be garbage.
The patch series fixes this on all architectures that currently define
__ARCH_WANT_SYS_CLONE3. It also adds a compile-time check to ensure
that any architecture that enables clone3() in the future is forced to
also implement copy_thread_tls().
My ultimate goal is to get rid of the copy_thread()/copy_thread_tls()
split and just have copy_thread_tls() at some point in the not too
distant future (Maybe even renaming copy_thread_tls() back to simply
copy_thread() once the old function is ripped from all arches). This
is dependent now on all arches supporting clone3().
While all relevant arches do that now there are still four missing:
ia64, m68k, sh and sparc. They have the system call reserved, but not
implemented. Once they all implement clone3() we can get rid of
ARCH_WANT_SYS_CLONE3 and HAVE_COPY_THREAD_TLS.
This series also includes a minor fix for the arm64 uapi headers which
caused __NR_clone3 to be missing from the exported user headers.
Unfortunately the series came in a little late especially given that
it touches a range of architectures. Due to the holidays not all arch
maintainers responded in time probably due to their backlog. Will and
Arnd have thankfully acked the arm specific changes.
Given that the changes are straightforward and rather minimal combined
with the fact the that clone3() with CLONE_SETTLS is broken I decided
to send them post rc3 nonetheless"
* tag 'clone3-tls-v5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
um: Implement copy_thread_tls
clone3: ensure copy_thread_tls is implemented
xtensa: Implement copy_thread_tls
riscv: Implement copy_thread_tls
parisc: Implement copy_thread_tls
arm: Implement copy_thread_tls
arm64: Implement copy_thread_tls
arm64: Move __ARCH_WANT_SYS_CLONE3 definition to uapi headers
My Netronome email address may become inactive soon.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
A couple of locations accidentally misspelled snapshot as shapshot.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The function to obtain a unique snapshot id was mistakenly typo'd as
devlink_region_shapshot_id_get. Fix this typo by renaming the function
and all of its users.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We've got quite a few bug reports showing the SOF driver being loaded
unintentionally recently, and the reason seems to be that users didn't
know the module option change: with the recent kernel, a new option
dsp_driver=1 has to be passed to a new module snd-intel-dspcfg
instead of snd_hda_intel.dmic_detect=0 option.
That is, actually there are two tricky things here:
- We changed the whole detection in another module and another
option semantics.
- The existing option for skipping the DSP probe was also renamed.
For avoiding the confusion and giving user more hint, this patch
reverts the renamed option dsp_driver back to dmic_detect for
snd-hda-intel module, and show the warning about the module option
change when the non-default value is passed.
Fixes: 82d9d54a6c ("ALSA: hda: add Intel DSP configuration / probe code")
Link: https://lore.kernel.org/r/20200109082000.26729-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Dan Murphy says:
====================
DP83822 and DP83TC811 Fixes
Two fixes on net/phy/Kconfig for the TI ethernet PHYs.
First fixed the typo in the Kconfig for the DP83TC811 where it incorretly stated
that the support was for a DP83TC822 which does not exist.
Second fix was to update the DP83822 Kconfig entry to indicate support for the
DP83825 devices in the description and the prompt.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Update the Kconfig description to indicate support for the DP83825I
device as well.
Fixes: 32b12dc8fde1 ("net: phy: Add DP83825I to the DP83822 driver")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix typo in the Kconfig for the DP83TC811 as it indicates support for
the DP83TC822 which is incorrect.
Fixes: 6d749428788b {"net: phy: DP83TC811: Introduce support for the DP83TC811 phy")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAl4XkqoQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgfPdCACArEwY6eMQspCf9akFXt1splXKKk6eygtZ
vKduoK0A0CGmYF3XGo0umk7KX5b2NZdvFbUiFzBv/zyrBL05yY86KIRUx+qCh8En
HIKDDL8grI4yyJftvcQeLo52B4Jw1SfP91MFSgowmOkTVlqlVwXDpn2cs/ShRD78
Z0fatPZ8XnHeiIpcAcsJLPlZXPDNORPkDv/ePBLepmT5CgQJWsZfeULNK8xP5Z4P
tJLyQPWM2Hz9tOlECVIGwNoIYlchN2erhy35UNstUIkew6MCOM2L4LfkV7jJ1b49
rZ1qlYlq+fVV+Ut+fNAusjK2Nn2Zh4zQ3bRd1qPxmeXS3SUstHJo
=mlvF
-----END PGP SIGNATURE-----
Merge tag 'v5.5-rockchip-dtsfixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes
A fix for the Beelink A1 IR receiver setting the correct polarity.
* tag 'v5.5-rockchip-dtsfixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Fix IR on Beelink A1
Link: https://lore.kernel.org/r/2054603.JKFSmqfO19@phil
Signed-off-by: Olof Johansson <olof@lixom.net>
- Fix i.MX8MM SDMA1 AHB clock setting to remove a "Timeout waiting for CH0"
error seen with UART1.
- Correct compatible of RV3029 RTC device on imx6q-dhcom board.
- Correct interrupt trigger type for magnetometer on board
imx8mq-librem5-devkit.
- A series from Anson Huang to fix vdd3p0 power supplier for a few NXP
development board.
- Fix imx6q-icore-mipi board to use 1.5 version of i.Core MX6DL, so
that Ethernet interface on the board works properly.
- Fix Toradex Colibri board to get NAND flash support back.
- Fix SGTL5000 VDDIO regulator connection for imx6q-dhcom, which
is connected to PMIC SW2 output rather than a fixed 3V3 rail.
- Fix 'reg' of CPU node on imx7ulp to get rid of a warning given by
kernel.
- Fix endian setting for DCFG on LS1028A SoC, so that register access
of DCFG becomes correct.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl4Xz5gUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM44xgf+J/WZaUY9S9tvl9w9kMdmmB71WSVY
qCgWTS6FUvw7AiJ+4mUzXXTP+Wwb0c1wBtvI4FRk6MhkHEc1nSkhJ5I9++bDD7BV
2ktAIJmC2uSHdazq/wjDMi4T6LGnmRv1xKkEvib2/CBVzET9PoGJY2stS8R0r2xf
WwCvMb0Lc7Twp0/nlY+h8ItHL50ZZuBSqW83P26zQdImHKMwRiAdlFa7eiZu82nV
sPadYbtf07yUfeLpUfYXo/nFZ+Q2c+tJGUNxm0hXGvc+FaWS4MM44luBTN2fpaVl
vAg2LKvdaWGbDZk0Q6WQdMsleDaHs3JdbaNrqBePbYyTnMll8N31ek3PWg==
=Hv2B
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-5.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.5, round 2:
- Fix i.MX8MM SDMA1 AHB clock setting to remove a "Timeout waiting for CH0"
error seen with UART1.
- Correct compatible of RV3029 RTC device on imx6q-dhcom board.
- Correct interrupt trigger type for magnetometer on board
imx8mq-librem5-devkit.
- A series from Anson Huang to fix vdd3p0 power supplier for a few NXP
development board.
- Fix imx6q-icore-mipi board to use 1.5 version of i.Core MX6DL, so
that Ethernet interface on the board works properly.
- Fix Toradex Colibri board to get NAND flash support back.
- Fix SGTL5000 VDDIO regulator connection for imx6q-dhcom, which
is connected to PMIC SW2 output rather than a fixed 3V3 rail.
- Fix 'reg' of CPU node on imx7ulp to get rid of a warning given by
kernel.
- Fix endian setting for DCFG on LS1028A SoC, so that register access
of DCFG becomes correct.
* tag 'imx-fixes-5.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx7: Fix Toradex Colibri iMX7S 256MB NAND flash support
ARM: dts: imx6sll-evk: Remove incorrect power supply assignment
ARM: dts: imx6sl-evk: Remove incorrect power supply assignment
ARM: dts: imx6sx-sdb: Remove incorrect power supply assignment
ARM: dts: imx6qdl-sabresd: Remove incorrect power supply assignment
ARM: dts: imx6q-icore-mipi: Use 1.5 version of i.Core MX6DL
arm64: dts: imx8mq-librem5-devkit: use correct interrupt for the magnetometer
ARM: dts: imx6q-dhcom: Fix SGTL5000 VDDIO regulator connection
ARM: dts: imx7ulp: fix reg of cpu node
arm64: dts: imx8mm: Change SDMA1 ahb clock for imx8mm
arm64: dts: ls1028a: fix endian setting for dcfg
ARM: dts: imx6q-dhcom: fix rtc compatible
Link: https://lore.kernel.org/r/20200110011836.GW4456@T480
Signed-off-by: Olof Johansson <olof@lixom.net>
The commit cited below causes devlink to emit a warning if a type was
not set on a devlink port for longer than 30 seconds to "prevent
misbehavior of drivers". This proved to be problematic when
unregistering the backing netdev. The flow is always:
devlink_port_type_clear() // schedules the warning
unregister_netdev() // blocking
devlink_port_unregister() // cancels the warning
The call to unregister_netdev() can block for long periods of time for
various reasons: RTNL lock is contended, large amounts of configuration
to unroll following dismantle of the netdev, etc. This results in
devlink emitting a warning despite the driver behaving correctly.
In emulated environments (of future hardware) which are usually very
slow, the warning can also be emitted during port creation as more than
30 seconds can pass between the time the devlink port is registered and
when its type is set.
In addition, syzbot has hit this warning [1] 1974 times since 07/11/19
without being able to produce a reproducer. Probably because
reproduction depends on the load or other bugs (e.g., RTNL not being
released).
To prevent bogus warnings, increase the timeout to 1 hour.
[1] https://syzkaller.appspot.com/bug?id=e99b59e9c024a666c9f7450dc162a4b74d09d9cb
Fixes: 136bf27fc0 ("devlink: add warning in case driver does not set port type")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: syzbot+b0a18ed7b08b735d2f41@syzkaller.appspotmail.com
Reported-by: Alex Veber <alexve@mellanox.com>
Tested-by: Alex Veber <alexve@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The EC on the Wilco platform responds with 0xFF to commands related to
the keyboard backlight on the absence of a keyboard backlight module.
This change allows the EC driver to continue loading even if the
backlight module is not present.
Fixes: 119a3cb6d6 ("platform/chrome: wilco_ec: Add keyboard backlight LED support")
Signed-off-by: Daniel Campello <campello@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Pull HID fix from Jiri Kosina:
"A regression fix for EPOLLOUT handling in hidraw and uhid"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: hidraw, uhid: Always report EPOLLOUT
Here are a number of USB and PHY driver fixes for 5.5-rc6
Nothing all that unusual, just the a bunch of small fixes for a lot of
different reported issues. The PHY driver fixes are in here as they
interacted with the usb drivers.
Full details of the patches are in the shortlog, and all of these have
been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXhjpVA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylDcgCeL+XYo/Qf/mN3du3RLYzE8lPxh3UAn3DXqiaj
XwZUHkevbaQfbRdGD9iS
=URSF
-----END PGP SIGNATURE-----
Merge tag 'usb-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/PHY fixes from Greg KH:
"Here are a number of USB and PHY driver fixes for 5.5-rc6
Nothing all that unusual, just the a bunch of small fixes for a lot of
different reported issues. The PHY driver fixes are in here as they
interacted with the usb drivers.
Full details of the patches are in the shortlog, and all of these have
been in linux-next with no reported issues"
* tag 'usb-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (24 commits)
usb: missing parentheses in USE_NEW_SCHEME
usb: ohci-da8xx: ensure error return on variable error is set
usb: musb: Disable pullup at init
usb: musb: fix idling for suspend after disconnect interrupt
usb: typec: ucsi: Fix the notification bit offsets
USB: Fix: Don't skip endpoint descriptors with maxpacket=0
USB-PD tcpm: bad warning+size, PPS adapters
phy/rockchip: inno-hdmi: round clock rate down to closest 1000 Hz
usb: chipidea: host: Disable port power only if previously enabled
usb: cdns3: should not use the same dev_id for shared interrupt handler
usb: dwc3: gadget: Fix request complete check
usb: musb: dma: Correct parameter passed to IRQ handler
usb: musb: jz4740: Silence error if code is -EPROBE_DEFER
usb: udc: tegra: select USB_ROLE_SWITCH
USB: core: fix check for duplicate endpoints
phy: cpcap-usb: Drop extra write to usb2 register
phy: cpcap-usb: Improve host vs docked mode detection
phy: cpcap-usb: Prevent USB line glitches from waking up modem
phy: mapphone-mdm6600: Fix uninitialized status value regression
phy: cpcap-usb: Fix flakey host idling and enumerating of devices
...
Here is a single fix, for the chrdev core, for 5.5-rc6
There's been a long-standing race condition triggered by syzbot, and
occasionally real people, in the chrdev open() path. Will finally took
the time to track it down and fix it for real before the holidays.
Here's that one patch, it's been in linux-next for a while with no
reported issues and it does fix the reported problem.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXhjcRA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykIyQCfcrNOyyFktEj7/qiVJrMLbzVWoWYAoMHtNQcG
3IYmNNJ+eXXJEiOgeZ4J
=J0bS
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fix from Greg KH:
"Here is a single fix, for the chrdev core, for 5.5-rc6
There's been a long-standing race condition triggered by syzbot, and
occasionally real people, in the chrdev open() path. Will finally took
the time to track it down and fix it for real before the holidays.
Here's that one patch, it's been in linux-next for a while with no
reported issues and it does fix the reported problem"
* tag 'char-misc-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
chardev: Avoid potential use-after-free in 'chrdev_open()'
Here are some small staging driver fixes for 5.5-rc6.
Nothing major here, just some small fixes for a comedi driver, the
vt6656 driver, and a new device id for the rtl8188eu driver.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXhjdDg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylG4wCfaB05qwUQnBHeHQC1vl8ZLt2eH7oAmwSoLT9h
J43QQPrLqR/KVVVCt0/J
=6GNV
-----END PGP SIGNATURE-----
Merge tag 'staging-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging fixes from Greg KH:
"Here are some small staging driver fixes for 5.5-rc6.
Nothing major here, just some small fixes for a comedi driver, the
vt6656 driver, and a new device id for the rtl8188eu driver.
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: rtl8188eu: Add device code for TP-Link TL-WN727N v5.21
staging: comedi: adv_pci1710: fix AI channels 16-31 for PCI-1713
staging: vt6656: set usb_set_intfdata on driver fail.
staging: vt6656: remove bool from vnt_radio_power_on ret
staging: vt6656: limit reg output to block size
staging: vt6656: correct return of vnt_init_registers.
staging: vt6656: Fix non zero logical return of, usb_control_msg
Here are two tty/serial driver fixes for 5.5-rc6.
The first fixes a much much reported issue with a previous tty port link
patch that is in your tree, and the second fixes a problem where the
serdev driver would claim ACPI devices that it shouldn't be claiming.
Both have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXhjdnA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynu9wCeK2+UkGRHnRu36Gnct0GitHsfYucAn35UwsfR
+R9QXskGEDl5NdWkPG77
=BTqO
-----END PGP SIGNATURE-----
Merge tag 'tty-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are two tty/serial driver fixes for 5.5-rc6.
The first fixes a much much reported issue with a previous tty port
link patch that is in your tree, and the second fixes a problem where
the serdev driver would claim ACPI devices that it shouldn't be
claiming.
Both have been in linux-next for a while with no reported issues"
* tag 'tty-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serdev: Don't claim unsupported ACPI serial devices
tty: always relink the port
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl4YvdoQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpoOuD/0eZkvtim/ZyEzj081PZUkslWwjNvEZV9+o
iYWMp0PBDyYgR79ca86EVTevcMiVxPnKpQl5DT+p9L1JzZ7dFc8U7fTpygjwbzx0
FdHlPQt+oN4TsGl3hpTGGnw2ArbCHnqqj31ahgo87zo0a01xv33C3QeGFyXEIYoR
F0QQ5E7EAyT2umKKflX9PWnrbOQZ91p2P3m+AE0TtOXMUgTi2KJKHUFu+G5OOwZB
dM41GvyZDY9WA7bUlFeOp0mRZsiGkfEsI59VP6AR8ZkxwsOeHLrVB5iBEGPiTDL2
dUwLwbGrLYFtwLEh4yd0aKt9++H2RZjJwi4ssyaDkkWCMQHECQXwd34DBmrV/qia
hgh/4DV0E1X3MZFYOk44zp8kwjgpmU9MCH3dFU0bWnzm9WrvtS9uBDjgEDkn6zty
xONSQeyHWVFQFwIjG260YEbuTplOTFP5rNWEf2CHWMHuk9kp8kfATWt9wlazYhtz
OUELfWmkrGk8nqMN4Ee+ty582I8gxk48IGwiJHOYh1gMHHgFnJbgr97Pe2NCLLee
9elkJnUQSdXuF314uznrAf7XLiEC0hfHGnPCTD8pAMf2DYOGKNeivh2wtdhd98cu
AvHew9qnI2C/oahY+DaE4wunP4VlNZ/ZeNAl0h8KG7uNBCA4uFtyBMNimnKVNblw
7KDsQ3vDIg==
=1bsG
-----END PGP SIGNATURE-----
Merge tag 'block-5.5-2020-01-10' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A few fixes that should go into this round.
This pull request contains two NVMe fixes via Keith, removal of a dead
function, and a fix for the bio op for read truncates (Ming)"
* tag 'block-5.5-2020-01-10' of git://git.kernel.dk/linux-block:
nvmet: fix per feat data len for get_feature
nvme: Translate more status codes to blk_status_t
fs: move guard_bio_eod() after bio_set_op_attrs
block: remove unused mp_bvec_last_segment
-----BEGIN PGP SIGNATURE-----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=TzX1
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.5-2020-01-10' of git://git.kernel.dk/linux-block
Pull io_uring fix from Jens Axboe:
"Single fix for this series, fixing a regression with the short read
handling.
This just removes it, as it cannot safely be done for all cases"
* tag 'io_uring-5.5-2020-01-10' of git://git.kernel.dk/linux-block:
io_uring: remove punt of short reads to async context
* sm_ftl: Fix NULL pointer warning.
Raw NAND:
* Cadence: fix compile testing.
* STM32: Avoid locking.
Onenand:
* Fix several sparse/build warnings.
SPI-NOR:
* Add a flag to fix interaction with Micron parts.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAl4YipIACgkQJWrqGEe9
VoTr/Af9GDYEaD5ZnYeOwTSs43Cd62K7wzPar9tE20xu5VVmPXmyIgSmxyoPXpjh
O89xxahrG4sD0vokSWstjgZVTzBEu2DHkeOsjD6j7buXlv5LN8o4dAqw7k6+Hle5
T5qHZogcO2HK+4OijIP6xJ6hQMGz4YxZvhw34zEqdPYivxTK8X3EDEuQDns9bMUr
nPOjCYhOoR//iIRUA+l78VEnA2unnGGhaQhBxGm43xwqYLrOMsmz859pjbt1DGob
B3w2MlJ33ADBhA3/7PswAb8Otz6yPT8eq/8a8Pl+t9SZIwgZGBnjv/kzkBaZQ0r7
UCe2aVD97l5OkIBoIfPA+thbavrHwQ==
=TapA
-----END PGP SIGNATURE-----
Merge tag 'mtd/fixes-for-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD fixes from Miquel Raynal:
"MTD:
- sm_ftl: Fix NULL pointer warning.
Raw NAND:
- Cadence: fix compile testing.
- STM32: Avoid locking.
Onenand:
- Fix several sparse/build warnings.
SPI-NOR:
- Add a flag to fix interaction with Micron parts"
* tag 'mtd/fixes-for-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: spi-nor: Fix the writing of the Status Register on micron flashes
mtd: sm_ftl: fix NULL pointer warning
mtd: onenand: omap2: Pass correct flags for prep_dma_memcpy
mtd: onenand: samsung: Fix iomem access with regular memcpy
mtd: onenand: omap2: Fix errors in style
mtd: cadence: Fix cast to pointer from integer of different size warning
mtd: rawnand: stm32_fmc2: avoid to lock the CPU bus
A few piled ASoC fixes and usual HD-audio and USB-audio fixups.
Some of them are for ASoC core, but rather about error-handling.
-----BEGIN PGP SIGNATURE-----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=/0Br
-----END PGP SIGNATURE-----
Merge tag 'sound-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A few piled ASoC fixes and usual HD-audio and USB-audio fixups. Some
of them are for ASoC core error-handling"
* tag 'sound-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda: enable regmap internal locking
ALSA: hda/realtek - Add quirk for the bass speaker on Lenovo Yoga X1 7th gen
ALSA: hda/realtek - Set EAPD control to default for ALC222
ALSA: usb-audio: Apply the sample rate quirk for Bose Companion 5
ALSA: hda/realtek - Add new codec supported for ALCS1200A
ASoC: Intel: boards: Fix compile-testing RT1011/RT5682
ASoC: SOF: imx8: Fix dsp_box offset
ASoC: topology: Prevent use-after-free in snd_soc_get_pcm_runtime()
ASoC: fsl_audmix: add missed pm_runtime_disable
ASoC: stm32: spdifrx: fix input pin state management
ASoC: stm32: spdifrx: fix race condition in irq handler
ASoC: stm32: spdifrx: fix inconsistent lock state
ASoC: core: Fix access to uninitialized list heads
ASoC: soc-core: Set dpcm_playback / dpcm_capture
ASoC: SOF: imx8: fix memory allocation failure check on priv->pd_dev
ASoC: SOF: Intel: hda: hda-dai: fix oops on hda_link .hw_free
ASoC: SOF: fix fault at driver unload after failed probe
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRuKdf4M92Gi9vqihve5qtOL396pgUCXhQyogAKCRDe5qtOL396
puHcAQC2B5eXcxXeEEdIDsK6xMJMIkikyTUTiBeBPVesOd3QQQD/XuD65VfOLCbO
ZLEzpsEyX9zY194Ga8u0ovyRovjW6gw=
=Xoh0
-----END PGP SIGNATURE-----
Merge tag 'thermal-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal fix from Daniel Lezcano:
"Fix backward compatibility with old DTBs on QCOM tsens (Amit
Kucheria)"
* tag 'thermal-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
drivers: thermal: tsens: Work with old DTBs
Prevent the cpufreq-dt driver from probing Tegra20/30 (Dmitry Osipenko)
and prevent the Intel RAPL power capping driver from crashing during
CPU initialization due to a NULL pointer dereference if the processor
model in use is not known to it (Harry Pan).
-----BEGIN PGP SIGNATURE-----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=ukHp
-----END PGP SIGNATURE-----
Merge tag 'pm-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"Prevent the cpufreq-dt driver from probing Tegra20/30 (Dmitry
Osipenko) and prevent the Intel RAPL power capping driver from
crashing during CPU initialization due to a NULL pointer dereference
if the processor model in use is not known to it (Harry Pan)"
* tag 'pm-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
powercap: intel_rapl: add NULL pointer check to rapl_mmio_cpu_online()
cpufreq: dt-platdev: Blacklist NVIDIA Tegra20 and Tegra30 SoCs
Sven-Haegar reported looping on fib dumps when 255.255.255.255 route has
been added to a table. The looping is caused by the key rolling over from
FFFFFFFF to 0. When dumping a specific table only, we need a means to detect
when the table dump is done. The key and count saved to cb args are both 0
only at the start of the table dump. If key is 0 and count > 0, then we are
in the rollover case. Detect and return to avoid looping.
This only affects dumps of a specific table; for dumps of all tables
(the case prior to the change in the Fixes tag) inet_dump_fib moved
the entry counter to the next table and reset the cb args used by
fib_table_dump and fn_trie_dump_leaf, so the rollover ffffffff back
to 0 did not cause looping with the dumps.
Fixes: effe679266 ("net: Enable kernel side filtering of route dumps")
Reported-by: Sven-Haegar Koch <haegar@sdinet.de>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jose Abreu says:
====================
net: stmmac: Filtering fixes
Two single fixes for the L3 and L4 filtering in stmmac.
1) Updates the internal status of RSS when disabling it in order to keep
internal driver status consistent.
2) Do not lets user add a filter if RSS is enabled because the filter will
not work correctly as RSS bypasses this mechanism.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
RSS, when enabled, will bypass the L3 and L4 filtering causing it not
to work. Add a check before trying to setup the filters.
Fixes: 425eabddaf ("net: stmmac: Implement L3/L4 Filters using TC Flower")
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
