Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Driver strength parameter can be changed not only on S5PC100 but also
on S5PV210/S5PC110 platforms, so move the helper functions to the common
plat-samsung directory.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
This patch adds GPIOlib support for S5PV210.
Signed-off-by: Pannaga Bhushan <p.bhushan@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Timer interrupts range was defined as 43-47, what overlaps with VIC0 range
(32-64). This was caused probably by a typo while the common interrupts
definition was refactored. This patch moves timer interrupt range to safe
area of 11-15 (just before uart range).
This fixes the commit 87aef30eb3
("ARM: S5P: Change S5P_TIMER_IRQ based to 11 for SAMSUNG S5P series.")
which meant to move these into the old (and previously reserved)
ISA space.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
[ben-linux@fluff.org: update description]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
This patch adds DSS2 support to the beagleboard boardfile. DVI and
TV-out are supported.
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
Add LCD, Boot-up logo, framebuffer console, Keypad
and Power button support
Signed-off-by: Roger Quadros <roger.quadros@nokia.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
The Touch controller and LCD Panel share the same SPI bus 1.
So, we need to define the touch controller in the SPI board info
else, the SPI bus will be contended due to invalid state of
Touch controller's Chip Select thus preventing the LCD panel
from working.
Signed-off-by: Roger Quadros <roger.quadros@nokia.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
Adds basic support for LCD Panel on Nokia N900
Signed-off-by: Roger Quadros <roger.quadros@nokia.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
Define platform devices for all audio devices found on S5P6440
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Define platform devices for all audio devices found on S5P6442
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Define platform devices for all audio devices found on S5PV210
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
The pm-gpio.c code was incrementing the gpio_nr from the nr_gpios
field and the bank-bank offset inside the loop, and also in the
for() loop with a ++.
Remove the ++, as the number is already at the next GPIO, thus
ensuring that we don't skip a gpio bank by accident.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
As part of the cleanup, remove the old macros mapping GPIO numbers
to the base of the register now we have gpiolib to manage the GPIO
mappings for us.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Update a couple of S3C24XX and S3C2412 files that are still
using the GPIO number to register mapping calls to get the
s3c_gpio_chip and use the base field from that.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Start cleaning up the numbering of GPIO banks by removing the old
bank start definitions currently being used by some of the header
files.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Increase GPIOs number for S3C244X, and make S3C_GPIO_END
point to BANKJ end, otherwise gpiolib refuses to register
BANKJ
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
[ben-linux@fluff.org: Move pm fix to new patch]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Move the S3C_FB_MAX_WIN to the platform data to avoid
having to include the registers with the platform data.
Set S3C_FB_MAX_WIN to 5, which is the maximum that any
of the current hardware can do and the cost of having
it set to this for all is minimal (at least for the
platform data case), then always leave this as the maximum
for the systems supported.
Also remove the inclusion of <mach/regs-fb.h> from
the device definition in arch/arm/plat-samsung
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Fix the definition of the LCD clock bit, it is the TFT display
controller on bit 9, not the older STN on bit 10.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
This adds the xusbxti clock to S3C64XX platform.
Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Samsung's Soc S5PV210 has three PL330 DMACs. First is dedicated for
Memory->Memory data transfer while the other two meant for data
transfer with peripherals.
Define and add latter two PL330 DMACs as platform devices on the
S5PV210 platform.
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Samsung's Soc S5P6442 has two PL330 DMACs. First is dedicated for
Memory->Memory data transfer while the second is meant for data
transfer with peripherals.
Define and add the peripheral PL330 DMAC as platform device on the
S5P6442 platform.
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Samsung's Soc S5P6440 has one PL330 DMAC.
Define and add the PL330 DMAC as platform device on the
S5P6440 platform.
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Latest Samsung SoCs have one or more PL330 as their DMACs. This patch
implements the S3C DMA API for PL330 core driver.
The design has been kept as generic as possible while keeping effort to
add support for new SoCs to the minimum possible level.
Some of the salient features of this driver are:-
o Automatic scheduling of client requests onto DMAC if more than
one DMAC can reach the peripheral. Factors, such as current load
and number of exclusive but inactive peripherals that are
supported by the DMAC, are used to decide suitability of a DMAC
for a particular client.
o CIRCULAR buffer option is supported.
o The driver scales transparently with the number of DMACs and total
peripherals in the platform, since all peripherals are added to
the peripheral pool and DMACs to the controller pool.
For most conservative use of memory, smallest driver size and best
performance, we don't employ legacy data structures of the S3C DMA API.
That should not have any affect since those data structures are completely
invisible to the DMA clients.
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
This patch de-asserts the reset line that is connected to the USB
ULPI PHY on USB Host1.
This patch should be included with the original USB host enablement
set of patches of mx51 babbage hw, but was accidentily left out.
Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch moves RTC device definitions from mach-s3c64xx
to plat-samsung, to enable the other SoCs to use same device
definition.
Signed-off-by: Atul Dahiya <atul.dahiya@samsung.com>
Signed-off-by: Sangbeom Kim <sbkim73@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
The member "clock" of struct "sja1000_platform_data" is documented as
"CAN bus oscillator frequency in Hz" but it's actually used as the CAN
clock frequency, which is half of it. To avoid further confusion, this
patch fixes it by renaming the member to "osc_freq". That way, also
non mainline users will notice the change. The platform code for the
relevant boards is updated accordingly. Furthermore, pre-defined
values are now used for the members "ocr" and "cdr".
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch moves ADC device definition to plat-samsung.
Because that is generic to the S3C64XX and S5P Series SoCs.
Signed-off-by: Naveen Krishna Ch <ch.naveen@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Seems like a typo, wrong setup leads to broken image on ipaq screen.
Signed-off-by: Mike Solovyev <ms@sk.2-ch.org>
Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
The ARCH_REQUIRE_GPIOLIB config option will select GPIOLIB which
in turn will select GENERIC_GPIO. Because of this, there is no
reason to do the select GENERIC_GPIO in arch/arm/Kconfig for the
architectures that have ARCH_REQUIRE_GPIOLIB.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
In preparation for removing volatile from the atomic_t definition, this
patch adds a volatile cast to all the atomic read functions.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is a reworking of an original patch posted by Aaro Koskinen:
oprofile does not work with PM, because sysdev_suspend() is done with
interrupts disabled and oprofile needs a mutex. Implementing oprofile
as a platform device solves this problem.
Cc: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Enable hardware perf-events if CPU_HAS_PMU and select
HAVE_OPROFILE if HAVE_PERF_EVENTS. If no hardware support
is present, OProfile will fall back to timer mode.
This patch also removes the old OProfile drivers in favour
of the code implemented by perf.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
There are currently two hardware performance monitoring subsystems in
the kernel for ARM: OProfile and perf-events. This creates the
following problems:
1.) Duplicate PMU accessor code. Inevitable code drift may lead to
bugs in one framework that are fixed in the other.
2.) Locking issues. OProfile doesn't reprogram hardware counters
between profiling runs if the events to be monitored have not been
changed. This means that other profiling frameworks cannot use the
counters if OProfile is in use.
3.) Due to differences in the two frameworks, it may not be possible to
compare the results obtained by OProfile with those obtained by perf.
This patch removes the OProfile PMU driver code and replaces it with
calls to perf, therefore solving the issues mentioned above.
The only userspace-visible change is the lack of SCU counter support
for 11MPCore. This is currently unsupported by OProfile userspace tools anyway and therefore shouldn't cause any problems.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Jamie Iles <jamie.iles@picochip.com>
Cc: Jean Pihet <jpihet@mvista.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
For OProfile to initialise oprofilefs correctly, it needs to know
the number of counters it can represent.
This patch adds a function to the ARM perf-events backend to return
the number of hardware counters available for the current PMU.
Cc: Jamie Iles <jamie.iles@picochip.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The perf-events framework for ARM only supports v6 and v7 cores.
This patch adds support for xscale v1 and v2 PMUs to perf, based on the
OProfile drivers in arch/arm/oprofile/op_model_xscale.c
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The ARM perf-events framework provides support for a number of different
PMUs using struct arm_pmu. The char *name field of this struct can be
used to identify the PMU, but this is cumbersome if used outside of perf.
This patch replaces the name string for a PMU with an enum, which holds
a unique ID for the PMU being represented. This ID can be used to index
an array of names within perf, so no functionality is lost. The presence
of the ID field, allows other kernel subsystems [currently oprofile] to
use their own mappings for the PMU name.
Cc: Jean Pihet <jpihet@mvista.com>
Acked-by: Jamie Iles <jamie.iles@picochip.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The current PMU infrastructure for ARM requires that the IRQs for the PMU
device are fixed at compile time and are selected based on the ARCH_ or MACH_ flags. This has the disadvantage of tying the Kernel down to a
particular board as far as profiling is concerned.
This patch replaces the compile-time IRQ registration with a runtime mechanism which allows the IRQs to be registered with the framework as
a platform_device.
A further advantage of this change is that there is scope for registering
different types of performance counters in the future by changing the id
of the platform_device and attaching different resources to it.
Acked-by: Jamie Iles <jamie.iles@picochip.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Provide a configuration option to allow the ARMv6 to use normal
bufferable memory for coherent DMA. This option is forced to 'y'
for ARMv7, and offered as a configuration option on ARMv6.
Enabling this option requires drivers to have the necessary barriers
to ensure that data in DMA coherent memory is visible prior to the
DMA operation commencing.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested on actual hardware using the g_ether and g_serial gadget drivers.
Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The Eyebot robot needs the OTG port in host mode on the smartbot.
Add a new board definition so we can select the usb host/device
mode at boot with the mx31moboard_baseboard boot parameter.
Signed-off-by: Philippe Rétornaz <philippe.retornaz@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In preparation for a new robot which needs the
OTG port as host.
This moves the OTG device registration into board
initialisation.
Signed-off-by: Philippe Rétornaz <philippe.retornaz@epfl.ch>
Acked-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Setup the pad with correct pull-up/down before doing the reset.
Assert the PHY enable signal so the reset is really done.
Signed-off-by: Philippe Rétornaz <philippe.retornaz@epfl.ch>
Acked-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
All other functions have the channel argument of type 'unsigned int'
the s3c2410_dma_devconfig also accept the same value as argument but
treat it as type 'int'. Remove this anomaly by make it 'unsigned int'.
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Add sclk clocks of type 'struct clksrc_clk' clock. The 'group2' of
clock clock sources is also added. This patch also changes the the
'id' member value of the uclk1 clock for instance instance 0 since
there are 4 instances of the uclk1 clock.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Add the sclk_audio(0/1/2) clocks and sclk_spdif clock of type
'struct clksrc_clk' clock. Also, add clk_pcmcdclk(0/1/2) clocks
of type 'struct clk' clock.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Add sclk_dac, sclk_mixer and sclk_hdmi clocks. These clocks
are of type 'struct clksrc_clk' and so have a corresponding
clock list. These clocks are also added to the list of
clocks to be registered at boot time.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
This patch adds the following system clocks.
1. clk_sclk_hdmiphy
2. clk_sclk_usbphy0
3. clk_sclk_usbphy1
4. sclk_dmc (dram memory controller clock)
5. sclk_onenand
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
This patch adds the following.
1. Adds 'clk_sclk_hdmi27m' clock to represent the HDMI 27MHz clock.
2. Adds 'clk_vpllsrc; clock of type clksrc_clk to represent the
input clock for VPLL.
3. Adds 'clk_sclk_vpll' clock of type clksrc_clk to represent the
output of the MUX_VPLL mux.
4. Add clk_sclk_hdmi27m, clk_vpllsrc and clk_sclk_vpll to the list
of clocks to be registered.
5. Adds boot time print of 'clk_sclk_vpll' clock rate.
6. Adds 'clk_fout_vpll' clock to plat-s5p such that it is reusable
on other s5p platforms.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
The clk_p83 clock, which is the PCLK clock for PSYS domain, is of
type 'struct clk' whereas on S5PV210, this clock is suitable to be
of type clksrc_clk clock (since it has a clock divider). So this
patch replaces the 'struct clk' type clock to 'struct clksrc_clk'
type clock for the PCLK PSYS clock.
This patch modifies the following.
1. Removes definitions and usage of 'clk_p66' clock.
2. Adds 'clk_pclk_psys' clock which is of type 'struct clksrc_clk'.
3. Replaces all usage of clk_p66 with clk_pclk_psys clock.
4. Adds clk_pclk_psys into list of clocks to be registered.
5. Removes the sys_clks array since it is no longer required.
Also the registration of clocks in sys_clks is also removed.
6. Remove the 'GET_DIV' as it is no longer required.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
The clk_p83 clock, which is the PCLK clock for DSYS domain, is of
type 'struct clk' whereas on S5PV210, this clock is suitable to be
of type clksrc_clk clock (since it has a clock divider). So this
patch replaces the 'struct clk' type clock to 'struct clksrc_clk'
type clock for the PCLK DSYS clock.
This patch modifies the following.
1. Remove definitions and usage of 'clk_p83' clock.
2. Adds 'clk_pclk_dsys' clock which is of type 'struct clksrc_clk'.
3. Replace all usage of clk_p83 with clk_pclk_dsys clock.
4. Adds clk_pclk_dsys into list of clocks to be registered.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
The clk_h100 clock represents the IMEM clock for the MSYS domain.
This clock rate of this clock is always half of the hclk_msys clock.
There is an issue when getting the clock rate of the clk_h100 clock
(clock get_rate hclk_h100 always returns clock rate that is equal to
the hclk_msys clock rate).
This patch modifies the following.
1. Moves the definition of the clk_h100 clock into the 'init_clocks'
list with the appropriate parent, ctrlbit, enable and ops fields.
2. The name of the clock is changed from 'clk_h100' to 'hclk_imem'
to represent more clearly that is represents the IMEM clock in
the MSYS domain.
3. The function to get the clock rate of the hclk_imem clock is added.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
The clk_p100 clock, which is the PCLK clock for MSYS domain, is of
type 'struct clk' whereas on S5PV210, this clock is suitable to be
of type clksrc_clk clock (since it has a choice of clock source
and a pre-divider). So this patch replaces the 'struct clk' type
clock to 'struct clksrc_clk' type clock for the PCLK MSYS clock.
This patch modifies the following.
1. Remove definitions and usage of 'clk_p100' clock.
2. Adds 'clk_pclk_msys' clock which is of type 'struct clksrc_clk'.
3. Replace all usage of clk_p100 with clk_pclk_msys clock.
4. Adds clk_pclk_msys into list of clocks to be registered.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
The clk_h133 clock, which is the HCLK clock for PSYS domain, is of
type 'struct clk' whereas on S5PV210, this clock is suitable to be
of type clksrc_clk clock (since it has a choice of clock source
and a pre-divider). So this patch replaces the 'struct clk' type
clock to 'struct clksrc_clk' type clock for the HCLK PSYS clock.
This patch modifies the following.
1. Remove definitions and usage of 'clk_h133' clock.
2. Adds 'clk_hclk_psys' clock which is of type 'struct clksrc_clk'.
3. Replace all usage of clk_h133 with clk_hclk_psys clock.
4. Adds clk_hclk_psys into list of clocks to be registered.
5. Removes the clock rate calculation of hclk133 and replaces
it with code that derives the HCLK PSYS clock rate from
the clk_hclk_psys clock.
6. Modify printing of the system clock rates.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
The clk_h166 clock, which is the HCLK clock for DSYS domain, is of
type 'struct clk' whereas on S5PV210, this clock is suitable to be
of type clksrc_clk clock (since it has a choice of clock source
and a pre-divider). So this patch replaces the 'struct clk' type
clock to 'struct clksrc_clk' type clock for the HCLK DSYS clock.
This patch modifies the following.
1. Remove definitions and usage of 'clk_h166' clock.
2. Adds 'clk_sclk_a2m' clock which is one of possible parent clock
sources for the DSYS HCLK clock.
3. Adds 'clk_hclk_dsys' clock which is of type 'struct clksrc_clk'.
4. Replace all usage of clk_h166 with clk_hclk_dsys clock.
5. Adds clk_sclk_a2m and clk_hclk_dsys into list of clocks to
be registered.
6. Removes the clock rate calculation of hclk166 and replaces
it with code that derives the HCLK DSYS clock rate from
the clk_hclk_dsys clock.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
The clk_h200 represents the HCLK for the MSYS domain. This clock
is of type 'struct clk' but on V210, it is more suitable to be of
type 'struct clksrc_clk' (since it is a divided version of the
armclk). The replacement clock is renamed as clk_hclk_msys to
indicate that it represents the HCLK for MSYS domain.
This patch modifies the following.
1. Removes the usage of the clk_h200 clock.
2. Adds the new clock 'clk_hclk_msys'.
3. Adds clk_hclk_msys to the list of sysclks to be registered.
4. Modifies the hclk_msys clock rate calculation procedure to
be based on the new clk_hclk_msys clock.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
This patch modifies the following.
1. Adds arm clock 'clk_armclk' of type clksrc_clk clock type.
2. Adds arm clock to the list of system clocks 'sysclks' for
registering it along with other system clocks.
3. Modifies the armclk clock rate calculation procedure to be
based on the new clk_armclk clock.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
The assignment of clock rates for fout apll/mpll/epll is moved further
up in the s5pv210_setup_clocks function because the subsequent patches
require the clock rate of fout clocks to be setup.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
This patch modifies the following.
1. Registers the mout_apll clksrc_clk clock.
2. The mout_mpll and mout_epll clocks were registered as 'struct clk'
types and then their parents were setup using the s3c_set_clksrc
function. This patch reduces the two steps into one by registering
the mout_mpll and mout_epll clocks using the s3c_register_clksrc
function.
3. As per point 2 above, the init_parents array is no longer required.
So the mout clocks are now put together in a new array named 'sysclks'.
The sysclks array will list the system level clocks and more
clocks will be added to it in the subsequent patches.
4. The clks array is left empty because of the movement of mpll and epll
clocks into the sysclks array. It is not deleted since subsequent
patches will add clocks into this array.
Signed-off-by: Thomas Abraham <thomas.ab <at> samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim <at> samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
The system clock definitions are currently defined below the
peripheral clock definitions in the V210 clock code. For the V210
clock updates that follow this patch, it is required that the
system clock definitions such as the mout_apll and mout_mpll be
defined prior to the device clock definitions. This patch
re-arranges the system clock defintions for the clock updates that
follow this patch.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Between "clean D line..." and "invalidate I line" operations in
v7_coherent_user_range(), the memory page may get swapped out.
And the fault on "invalidate I line" could not be properly handled
causing the oops.
In ARMv6 "external abort on linefetch" replaced by "instruction cache
maintenance fault". Let's handle it as translation fault. It fixes the
issue.
I'm not sure if it's reasonable to check arch version in run-time.
Let's do it in compile time for now.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Siarhei Siamashka <siarhei.siamashka@nokia.com>
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Enabling CONFIG_USER_DEBUG allows NWFPE to complain about every FP
exception, which with some programs can cause the kernel message log
to fill with NWFPE debug, swamping out other messages.
This change allows NWFPE debugging to be configured at run time.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
PL330 is a configurable DMA controller PrimeCell device.
The register map of the device is well defined.
The configuration of a particular implementation can be
read from the six configuration registers CR0-4,Dn.
This patch implements a driver for the specification:-
http://infocenter.arm.com/help/topic/com.arm.doc.ddi0424a/DDI0424A_dmac_pl330_r0p0_trm.pdf
The exported interface should be sufficient to implement
a driver for any DMA API.
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The L310 cache controller's interface is almost identical
to the L210. One major difference is that the PL310 can
have up to 16 ways.
This change uses the cache's part ID and the Associativity
bits in the AUX_CTRL register to determine the number of ways.
Also, this version prints out the CACHE_ID and AUX_CTRL registers.
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Jason S. McMullan <jason.mcmullan@netronome.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
These files include linux/bootmem.h without using anything from this
file; remove the unnecessary include.
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Convert code away from ->read_proc/->write_proc interfaces. Switch to
proc_create()/proc_create_data() which makes addition of proc entries
reliable wrt NULL ->proc_fops, NULL ->data and so on.
Problem with ->read_proc et al is described here commit
786d7e1612 "Fix rmmod/read/write races in
/proc entries"
This patch is part of an effort to remove the old simple procfs PAGE_SIZE
buffer interface.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* master.kernel.org:/home/rmk/linux-2.6-arm:
ARM: 6126/1: ARM mpcore_wdt: fix build failure and other fixes
ARM: 6125/1: ARM TWD: move TWD registers to common header
ARM: 6110/1: Fix Thumb-2 kernel builds when UACCESS_WITH_MEMCPY is enabled
ARM: 6112/1: Use the Inner Shareable I-cache and BTB ops on ARMv7 SMP
ARM: 6111/1: Implement read/write for ownership in the ARMv6 DMA cache ops
ARM: 6106/1: Implement copy_to_user_page() for noMMU
ARM: 6105/1: Fix the __arm_ioremap_caller() definition in nommu.c
DA8xx OHCI driver fails to load due to failing clk_get() call for the USB 2.0
clock. Arrange matching USB 2.0 clock by the clock name instead of the device.
(Adding another CLK() entry for "ohci.0" device won't do -- in the future I'll
also have to enable USB 2.0 clock to configure CPPI 4.1 module, in which case
I won't have any device at all.)
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
McBSP module in OMAP4 needs to be able to set its tx/rx threshold
and enable the transmitter/receiver when starting an audio stream.
Signed-off-by: Jorge Eduardo Candelaria <jorge.candelaria@ti.com>
Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
In OMAP4, there is only one irq line for TX and RX paths. Use
the correct irq line to avoid errors at runtime.
Also, request irq line only once (instead of requesting for TX
and RX).
Signed-off-by: Jorge Eduardo Candelaria <jorge.candelaria@ti.com>
Acked-by: Jarkko Nikula <jhnikula@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
This rejects unaligned device virtual address('da') and physical
address('pa') and informs error to caller when a page table entry is
set. Otherwise, a wrong address can be used by IO device.
Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Cc: Hari Kanigeri <h-kanigeri2@ti.com>
Searching avaialable spaces should be stopped as soon as it turns out
that there's no possibility with the rest of it.
Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Inserting a gap page between IOVMAs could detect an override on other
IOVMA with iommu fault. This was originally suggested by Sakari Ailus
and based on the work and comment by David Cohen.
Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Cc: David Cohen <david.cohen@nokia.com>
Cc: Sakari Ailus <Sakari.Ailus@nokia.com>
This CONFIG_OMAP_IOMMU_DEBUG option cannot be selected because it's
not visible on menu. Make this option selectable.
Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
There are some places to scan iotlb entries. This iteration macro
could make these code a bit simpler with proceeding iotlb entries
transparently.
Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Tested-by: Hari Kanigeri <h-kanigeri2@ti.com>
This patch adds TLB preservation support to IOMMU module
Signed-off-by: Hari Kanigeri <h-kanigeri2@ti.com>
Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
This patch provides the iommu support for OMAP4 co-processors.
Signed-off-by: Hari Kanigeri <h-kanigeri2@ti.com>
Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
This patch includes changes to omap3-iommu.c file to make it generic
for all OMAPs. Renamed omap3-iommu.c to omap-iommu.c
[Hiroshi DOYU: Remove unnecessary "iommu-y" in Makefile]
Signed-off-by: Hari Kanigeri <h-kanigeri2@ti.com>
Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Declare 'audio-bus' clock for IISv4 controller of S3C6410.
Even though the name is same as that for IISv3, the id is
set to -1(just one instance of the controller is available)
which helps always fetch the correct clock.
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Declare possible sources of CLKAUDIO[2]/audio-bus for IISv4 controller.
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Declare the source of clock provided at Xi2sCDCLK2 pin for IISv4 controller.
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Add a kirkwood_nand_init_rnb() call to allow boards which
have RnB line detection to register this instead of a
static delay.
Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Add support for a board to register a callback to get the state of the
RnB line if it has it attached.
Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Enables basic boot support for the MSM7x30 SURF development
board.
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
The MSM7x30 does not have a separate bank of memory for shared
memory communication with the radio CPU. Set the kernel base
address 2MB in, to use this first 2MB for this purpose.
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
The MSM SOC's DMA controller contains several security domains.
On the MSM7x00, only security domain 3 is accessible to our CPU.
The 7x30, however, uses security domain 2. Fix up the register
definition macros to select this appropriately, based on
configured target.
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
This adds a clock list, and common resource structures
for MSM7x30.
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
Add a header describing the io regions for MSM7x30.
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
Enable CONFIG_ARCH_QSD8X50. This is the first SOC with the
Scorpion processor.
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
Support different RAM base addresses used by Qualcomm SOCs, with
QSD8x50 as the first addtional one.
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
This adds a clock list, and common resource structures
for QSD8x50.
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
Add a header describing the io regions for QSD8x50.
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
Some SoC need to redefine MSM_DGT_BASE from it's default.
This allows it to be defined in a header to override the
default value.
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
GPIO support for Qualcomm SOCs requires interaction with the
radio (baseband processor). This API allows the different boards
to enable GPIO through the radio processor in a generic way.
Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
The 'PCOM' method of clock control (commands issued to the radio
CPU) is shared across several (but not all) Qualcomm SOCs.
Generalize this clock mechanism so these other SOCs can be added.
Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
Scorpion-based SOCs from Qualcomm use a different interrupt
controller 'sirc'.
Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
msm_iomap.h is specific to the MSM7x00 series devices. Generalize
this in preparation to support more devices.
Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
irqs.h is specific to the MSM7x00 series devices. Generalize
this in preparation to support more devices.
Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
devices.c is specific to the MSM7x00 series of SOCs. Rename
appropriately in preparation to support more devices.
Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
More complete AEMIF support for boards.
Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Added PINMUX configurations for the CLKOUT0 .. CLKOUT2
functions, for boards that want to use these clocks.
Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Board code may want to use them.
Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
This patch allows for a more flexible ioremap() interception based on iotable
contents.
With this patch, the ioremap() interception code can properly translate
addresses only after davinci_soc_info has been initialized. Consequently,
in soc-specific init functions, davinci_common_init() has to happen before any
ioremap() attempts. The da8xx init sequence has been suitably modified to meet
this restriction.
Signed-off-by: Cyril Chemparathy <cyril@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
This patch modifies the pinmux implementation so as to ioremap() the pinmux
register area on first use.
Signed-off-by: Cyril Chemparathy <cyril@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
This patch implements the following:
- interrupt initialization uses ioremap() instead of passing a virtual address
via davinci_soc_info.
- machine definitions directly point to cp_intc_init() or davinci_irq_init()
- davinci_intc_type and davinci_intc_base now get initialized in controller
specific init functions instead of davinci_common_init()
- minor fix in davinci_irq_init() to use intc_irq_num instead of
DAVINCI_N_AINTC_IRQ
Signed-off-by: Cyril Chemparathy <cyril@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
This patch modifies the psc and clock control code to use ioremap()ed
registers.
Signed-off-by: Cyril Chemparathy <cyril@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
This patch eliminates IO_ADDRESS() usage for Davinci timer definitions. The
timer code has correspondingly been modified to ioremap() MMRs instead.
Signed-off-by: Cyril Chemparathy <cyril@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
This patch replaces the jtag id base info in davinci_soc_info with a physical
address which is then ioremap()ed within common code.
This patch (in combination with a similar change for PSC) will allow us to
eliminate the SYSCFG nastiness in DA8xx code.
Signed-off-by: Cyril Chemparathy <cyril@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
This patch modifies the RTC unlock code to use ioremap() maps instead of
IO_ADDRESS() translation.
Signed-off-by: Cyril Chemparathy <cyril@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
This patch modifies the gpio_base definition in davinci_soc_info to be a
physical address, which is then ioremap()ed by the gpio initialization
function.
Signed-off-by: Cyril Chemparathy <cyril@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
In the edma driver, most of the long lines in 'if condition' are
broken after the logical operator '&&' except two instances.
This patch fixes that to bring consistency across the file.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
This patch replaces occurences of (1 << x) with
BIT(x) as it makes for much better reading.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
This provides some serious scheduling for the Nomadik family by
introducing a sched_clock() using the MTU clock source in the
same manner as e.g. OMAP or U300. This type of solutions has been
discussed at no end in the past, however we need this resolution
for making measurements and using HRTimers.
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This patch adds platform side support code for the EP93xx SPI
driver. This includes clock, resources and muxing. There is a new
function: ep93xx_register_spi() which can be used by board support
code to register new SPI devices for the board.
This patch depends on patch
5998/1 ep93xx: added chip revision reading function
Cc: Ryan Mallon <ryan@bluewatersys.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Martin Guy <martinwguy@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This patch adds the following.
1. Add new definitions of clock of type 'struct clksrc_clk'.
2. Add gate control function for GATE_SCLK1 which is required
for new clock additions.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
The clock source options avaialable in the clkset_mmc_spi are
applicable to clocks such as sclk_post, sclk_dispcon and
sclk_fimgvg. So this set is renamed as clkset_group1 to indicate
that it can be used as clock sources for other clocks and not
just for sclk_spi and sclk_mmc clocks.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Add definitions of clocks of type 'struct clk'.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
The pclk_low clock is of type 'struct clk' whereas on S5P6440,
the pclk_low clock is more suitable to be of type 'struct clksrc_clk'
(since pclk_low clock is a divided clock of hclk_low clock).
This patch modifies the following.
1. Removes the definition and usage of clk_p_clk clock.
2. Adds the clk_pclk_low clock of type 'struct clksrc_clk' clock.
3. Adds clk_pclk_low to the list of system clocks.
4. The clock rate of pclk_low is derived from the clk_pclk_low clock.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
The clk_h_low clock is of type 'struct clk' whereas on S5P6440,
the hclk_low clock is more suitable to be of type 'struct clksrc_clk'
(since hclk_low clock is derived from a choice of clock sources and
then divided by a divisor).
This patch modifies the following.
1. Removes the definition and usage of clk_h_clk clock.
2. Adds the clk_hclk_low clock of type 'struct clksrc_clk' clock.
3. Adds clk_hclk_low to the list of system clocks.
4. The clock rate of hclk_low is derived from the clk_hclk_low clock.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
The clk_p clock is of type 'struct clk' whereas on S5P6440,
the pclk is more suitable to be of type 'struct clksrc_clk'
(since pclk clock is divided version of hclk).
This patch modifies the following.
1. Adds the 'clk_pclk' clock which is of type 'struct clksrc_clk'.
2. Adds clk_pclk into the list of sysclks.
3. The clock rate 'pclk' is modified to be derived from clk_pclk.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
The clk_h clock is of type 'struct clk' whereas on S5P6440,
the hclk is more suitable to be of type 'struct clksrc_clk'
(since hclk clock is divided version of armclk)
This patch modifies the following.
1. Adds the 'clk_hclk' clock which is of type 'struct clksrc_clk'.
2. Removes all references to the clk_h clock.
3. Addes clk_hclk into the list of sysclks.
4. The clock rate 'hclk' is modified to be derived from clk_hclk.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
The clk_arm clock is of type 'struct clk' whereas on S5P6440,
the arm clock is more suitable to be of type 'struct clksrc_clk'
(since arm clock is divided version of apll clock).
This patch modifies the following.
1. Removes the usage of clk_arm clock (defined in plat-s5p) and
defines the new clock 'clk_armclk' of type 'struct clksrc_clk'.
2. Rearranges the assignment of clock rate for the fout_a/m/epll
clocks. This will help in calculating the clock rate of fclk
from clk_armclk clock and setup the clock rate for fout_m/epll
for subsequent patches which depend on it.
3. Modifies the clock rate calculation of fclk to be based on
the newly added clk_armclk clock.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
This patch modifies the following.
1. Modifies the dout_mpll clock type as clksrc_clk clock type.
This modification allows the use of common clock code in
managing the dout_mpll clock (which otherwise would need
custom defined functions such as s5p6440_clk_doutmpll_get_rate).
2. s5p6440_clk_doutmpll_get_rate function is removed as it is
no longer needed.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
This patch modifies the following.
1. Registers the mout_apll clksrc_clk clock.
2. The mout_mpll and mout_epll were registered as 'struct clk'
types and then their parents were setup using the s3c_set_clksrc
function. This patch reduces the two steps into one by registering
the mout_mpll and mout_epll clocks using the s3c_register_clksrc
function.
3. As per point 2 above, the init_parents array is no longer required.
So the mout clocks are now put together in a new array named 'sysclks'.
The sysclks array will list the system level clocks and more
clocks will be added to it in the subsequent patches.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
The generic gpiolib provides a debugfs interface to GPIOs which
provides identical (but nicer looking) data as the OMAP specific one.
This patch completely drops the OMAP specific interface
(/debug/omap_gpio) in favor of using the generic one (/debug/gpio.)
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
setwkuena and setdataout are covered already by wake_en and dataout fields.
Signed-off-by: Tero Kristo <tero.kristo@nokia.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Ensure GPIO debounce clocks are disabled when idle. Otherwise,
clocks will prevent PER powerdomain from entering retention.
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Currently, the GPIO 'prepare' hook is only called when going to
off-mode, while the function is called 'prepare_for_retention.' This
patch renames the function to 'prepare_for_idle' and calls it for any
powersate != PWRDM_POWER_ON passing in the powerstate.
The hook itself is then responsible for doing various preparation
based on the powerstate.
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
According to the GPIO 'Wakeup and Interrupt' section of the TRM[1],
wake-up requests can only be generated on edge transitions.
Also for OMAP3, only edge GPIOs may lose interrupts when PER enters
RET/OFF state, this is addressed by gpio prepare|resume idle functions
[1] Section 25.5.3.1 OMAP34xx_ES3.1_TRM_V_Q
Signed-off-by: Chunqiu Wang <cqwang@motorola.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Off mode is now using the omap2 retention fix code for scanning GPIOs
during off-mode transitions. All the *non_wakeup_gpios variables
are now used for off-mode transition tracking on OMAP3. This patch fixes
cases where GPIO state changes are missed during off-mode.
Signed-off-by: Tero Kristo <tero.kristo@nokia.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
We can remove this wakeup dependency since now, when
GPIO2-6 are enabled for IO-pad wakeup, PER domain is gauranteed
to be awake or be woken up to service.
The previous dependency did not handle all corner cases. Since there
was no sleep dependency between CORE and PER domains, if PER enters
RET and CORE is ON, PER will not be active for GPIO handling.
Signed-off-by: Mike Chan <mike@android.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
IO events can also come from GPIO modules, which reside in the PER domain.
It is possible for the PER to enter RET while CORE is still in ON.
If GPIO 2-6 are enabled for IO-pad wakeups, the PER domain will not
wakeup in this case, unless we enable it.
Signed-off-by: Mike Chan <mike@android.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
This patch enables the wakeup capabilities of ads7846 touchscreen driver.
ads7846 driver can now wakeup the system from suspend on OMAP3430 EVM
and SDP boards.
The earlier approach of enabling wakeup on the touchscreen GPIO pin during
board level mux init is removed. Instead the wakeup flag in
ads7846_platform_data is enabled. Based on the flag, the ads7846 driver
will do an enable_irq_wake which will eventually call into the OMAP GPIO
layer and will enable the wakeup capability on the GPIO pin.
Signed-off-by: Ranjith Lohithakshan <ranjithl@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
OMAP3530 TRM section 7.4.4.4.2 requires OFFOUTENABLE to be set (active low)
if wakeup capabilities are enabled on a pad. During OFF mode testing
on OMAP3530 EVM, it was observed that the device was not residing in
the OFF state. The device enters into the OFF state and immediately exits
from that state as if an IO wakeup event has occured. The issue was traced
down to the pad configuration of wkaeup enabled pad's.
Signed-off-by: Ranjith Lohithakshan <ranjithl@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Millisecond resolution is possible and there are use cases for it
(automatic testing).
Seconds-based interface is preserved for compatibility.
Signed-off-by: Ari Kauppi <Ext-Ari.Kauppi@nokia.com>
Reviewed-by: Phil Carmody <ext-phil.2.carmody@nokia.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
While handling PRCM IRQs, mask out interrupts that are not enabled in
PRM_IRQENABLE_MPU. If these are not masked out, non-enabled
interrupts are caught, a WARN() is printed due to no 'handler' and the
events are cleared. In addition to being noisy, this can also
interfere with independent polling of this register by SR/VP code.
This was noticed using SmartReflex transitions which cause the VPx_*
interrupts to be handled since they are set in PRM_IRQSTATUS_MPU even
but not enabled in PRM_IRQENABLE_MPU.
Acked-by: Mike Turquette <mturquette@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
This fixes the following warning,
arch/arm/mach-msm/smd_debug.c:240: warning: initialization from incompatible pointer type
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Without a debug uart selected you get this failure,
arch/arm/mach-msm/board-trout.c:85: error: 'MSM_DEBUG_UART_PHYS' undeclared here (not in a function)
arch/arm/mach-msm/board-trout.c:86: error: 'MSM_DEBUG_UART_BASE' undeclared here (not in a function)
This just removes these lines in that case.
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
This removes the Kconfig menu option. SMD can still be selected
but it's done inside the Kconfig file and not via the menu.
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
When booting up we need to wait for the modem processor to
partially boot. This is because the modem processor does
resource allocation for us. If we don't wait the modem won't
honor our requests and we end up crashing or in an unknown
state. This change just formalizes the waiting process.
Signed-off-by: Daniel Walker <c_dwalke@quicinc.com>
This irq handler isn't used in all cases, so add the proper ifdef. This
eliminates a compiler warning due to the function not getting used.
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
This just removed some unneeded predefines. One needed a whole
function moved down further. The others could just be deleted.
No functional changes.
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
This moves the msm_a2m_int() function into the header, and
does a small macro clean up to be more inline with Linux
norms. No functional changes.
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
"unsigned" translates to "unsigned int", but this value holds an
address. We always want to use unsigned long for addresses since
it will change size to fit the machine.
This just convert the one address holder to unsigned long.
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
This modifies SMD to use either the package v3 or package v4,
but not both. The current code tries to allocate as v4 on all
system which can produce a scary looking error message on boot up,
smem_find(16, 40): wrong size 16424
smd_alloc_channel() cid=02 size=08192 'SMD_RPCCALL'
With this error the code then falls back on the package v3 allocation
method. This method is inefficient because it causes a slow down
on some systems even when the allocation method can be determined
at compile time. It also causes a kernel size increase that effects
all system and is not needed.
This change corrects the allocation to use one method or the other
and not both.
Signed-off-by: Daniel Walker <c_dwalke@quicinc.com>
Forcing the alignment prevents gcc from generating byte reads for word
member variables. Lack of this caused issues when the app processor
modified struct members and the modem saw a partial word write.
Signed-off-by: Dima Zavin <dima@android.com>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Some smd clients may write from multiple threads, in which case it's
not safe to call smd_write without holding a lock. smd_write_atomic()
provides the same functionality as smd_write() but obtains the smd
lock first.
Signed-off-by: Brian Swetland <swetland@google.com>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Don't mark a channel as allocated if we failed to allocate it
(perhaps the modem updated one table but not the other, etc)
Signed-off-by: Brian Swetland <swetland@google.com>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
When we read data out of the sender's fifo, we need to advance the sender's
tail pointer, not the receiver's.
Signed-off-by: Haley Teng <Haley_Teng@htc.com>
Acked-by: Dima Zavin <dima@android.com>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
- QSD8250 has a DSP that speaks SMD, in addition to the modem
- handle a separate list of modem vs dsp channels
- install dsp smd irq handler as necessary
Signed-off-by: Brian Swetland <swetland@google.com>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
- pull debug code into smd_debug.c
- move necessary structures and defines into smd_private.h
- fix some comment formatting, etc
Signed-off-by: Brian Swetland <swetland@google.com>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
The new protocol require writing to two state fields, and reading
several fields.
Signed-off-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
- support both v2 and v1 style smd channels
- support both v2 and v1 smsm shared state
- update smsm state defines and smem item enum
- prep work for dealing with smd to qdsp6
- simplify some smem access to minimize use of smem_alloc() at runtime
Signed-off-by: Brian Swetland <swetland@google.com>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
This code provides the low level interface to the "shared memory
state machine" (smsm), and the virtual serial channels (smd), used
to communicate with the baseband processor. Higher level transports
(rpc, ethernet, AT command channel, etc) ride on top of this.
Signed-off-by: Brian Swetland <swetland@google.com>
Also, convert all SDCC IRQ resources to be named. No longer pass status_irq
in the platform_data
Signed-off-by: Dima Zavin <dima@android.com>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Support independent enable and disable by clients for common
vreg. First enable switches on and last disable switches off.
This change has no check for voltage level so clients
must agree on level for common vreg.
Signed-off-by: Matthew Wilson <mtwilson@quicinc.com>
Fixes the following warning,
arch/arm/mach-msm/acpuclock-arm11.c:138: warning: 'freq_table' defined but not used
when CONFIG_CPU_FREQ_TABLE is not enabled.
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Keep track of the success/failure of the last vreg proc comm
command, and return that on debugfs reads.
Signed-off-by: Steve Muckle <smuckle@quicinc.com>
This adds acpuclock-arm11.c from Google. This provides control
over the cpu frequency for arm11 cpu's.
This has shared authorship between Google, and Qualcomm. Most
of it was written by Mike Chan at Google.
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
This moves the TWD register set of MPcore to a common
existing file so that watchdog driver can access it
Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Move HWMON platform definition from plat-s3c24xx to plat-samsung
and adjust mach-bast to use the new s3c_hwmon_set_platdata().
This allows usage of dev-hwmon by other Samsung SoCs.
Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
This patch removes static of s5p6440_sysclass, s5p6442_sysclass,
and s5pv210_sysclass for defintion as extern.
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
The address ben@fluff.org is old, ben-linux@fluff.org has been in use
for a long time, and we should fixup all the occasions of the older
address to avoid confusion.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
According to datasheet GPG13-15 must be configured as input in NAND
boot mode, otherwise device will not be able to wake up
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
If PM_H1940 is enabled, kernel _must_ be located upper then 0x30008000,
because this area (0x30000000-0x30100000) can be used by bootloader. If
kernel is located at 0x30008000, bootloader will corrupt kernel's code during
resume.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
In order to prevent code ambiguous, add namespace on functions in ssp driver.
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Support regulator MAX8649, PMIC MAX8925 into the Jasper.
Backlight & power supply components of MAX8925 are enabled in Jasper.
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Sync twsi index to register index. It's used to avoid typo error.
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
