Karsten Graul says:
====================
net/smc: fixes 2021-09-20
Please apply the following patches for smc to netdev's net tree.
The first patch adds a missing error check, and the second patch
fixes a possible leak of a lock in a worker.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The abort_work is scheduled when a connection was detected to be
out-of-sync after a link failure. The work calls smc_conn_kill(),
which calls smc_close_active_abort() and that might end up calling
smc_close_cancel_work().
smc_close_cancel_work() cancels any pending close_work and tx_work but
needs to release the sock_lock before and acquires the sock_lock again
afterwards. So when the sock_lock was NOT acquired before then it may
be held after the abort_work completes. Thats why the sock_lock is
acquired before the call to smc_conn_kill() in __smc_lgr_terminate(),
but this is missing in smc_conn_abort_work().
Fix that by acquiring the sock_lock first and release it after the
call to smc_conn_kill().
Fixes: b286a0651e ("net/smc: handle incoming CDC validation message")
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit in Fixes introduced early_reserve_memory() to do all needed
initial memblock_reserve() calls in one function. Unfortunately, the call
of early_reserve_memory() is done too late for Xen dom0, as in some
cases a Xen hook called by e820__memory_setup() will need those memory
reservations to have happened already.
Move the call of early_reserve_memory() before the call of
e820__memory_setup() in order to avoid such problems.
Fixes: a799c2bd29 ("x86/setup: Consolidate early memory reservations")
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20210920120421.29276-1-jgross@suse.com
The initial observation was that in PV mode under Xen 32-bit user space
didn't work anymore. Attempts of system calls ended in #GP(0x402). All
of the sudden the vector 0x80 handler was not in place anymore. As it
turns out up to 5.13 redundant initialization did occur: Once from
cpu_initialize_context() (through its VCPUOP_initialise hypercall) and a
2nd time while each CPU was brought fully up. This 2nd initialization is
now gone, uncovering that the 1st one was flawed: Unlike for the
set_trap_table hypercall, a full virtual IDT needs to be specified here;
the "vector" fields of the individual entries are of no interest. With
many (kernel) IDT entries still(?) (i.e. at that point at least) empty,
the syscall vector 0x80 ended up in slot 0x20 of the virtual IDT, thus
becoming the domain's handler for vector 0x20.
Make xen_convert_trap_info() fit for either purpose, leveraging the fact
that on the xen_copy_trap_info() path the table starts out zero-filled.
This includes moving out the writing of the sentinel, which would also
have lead to a buffer overrun in the xen_copy_trap_info() case if all
(kernel) IDT entries were populated. Convert the writing of the sentinel
to clearing of the entire table entry rather than just the address
field.
(I didn't bother trying to identify the commit which uncovered the issue
in 5.14; the commit named below is the one which actually introduced the
bad code.)
Fixes: f87e4cac4f ("xen: SMP guest support")
Cc: stable@vger.kernel.org
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/7a266932-092e-b68f-f2bb-1473b61adc6e@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Commit 8480ed9c2b ("xen/balloon: use a kernel thread instead a
workqueue") switched the Xen balloon driver to use a kernel thread.
Unfortunately the patch omitted to call try_to_freeze() or to use
wait_event_freezable_timeout(), causing a system suspend to fail.
Fixes: 8480ed9c2b ("xen/balloon: use a kernel thread instead a workqueue")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20210920100345.21939-1-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Various places in the nvme code that rely on ctrl->namespace to be
ordered. Ensure that the namespae is inserted into the list at the
right position from the start instead of sorting it after the fact.
Fixes: 540c801c65 ("NVMe: Implement namespace list scanning")
Reported-by: Anton Eidelman <anton.eidelman@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
When the controller sends us multiple r2t PDUs in a single
request we need to account for it correctly as our send/recv
context run concurrently (i.e. we get a new r2t with r2t_offset
before we updated our iterator and req->data_sent marker). This
can cause wrong offsets to be sent to the controller.
To fix that, we will first know that this may happen only in
the send sequence of the last page, hence we will take
the r2t_offset to the h2c PDU data_offset, and in
nvme_tcp_try_send_data loop, we make sure to increment
the request markers also when we completed a PDU but
we are expecting more r2t PDUs as we still did not send
the entire data of the request.
Fixes: 825619b09a ("nvme-tcp: fix possible use-after-completion")
Reported-by: Nowak, Lukasz <Lukasz.Nowak@Dell.com>
Tested-by: Nowak, Lukasz <Lukasz.Nowak@Dell.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Remove the freeze/unfreeze around changes to the number of hardware
queues. Study and retest has indicated there are no ios that can be
active at this point so there is nothing to freeze.
nvme-fc is draining the queues in the shutdown and error recovery path
in __nvme_fc_abort_outstanding_ios.
This patch primarily reverts 88e837ed0f "nvme-fc: wait for queues to
freeze before calling update_hr_hw_queues". It's not an exact revert as
it leaves the adjusting of hw queues only if the count changes.
Signed-off-by: James Smart <jsmart2021@gmail.com>
[dwagner: added explanation why no IO is pending]
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
To avoid race between time out and tear down, in tear down process,
first we quiesce the queue, and then delete the timer and cancel
the time out work for the queue.
This patch merges the admin and io sync ops into the queue teardown logic
as shown in the RDMA patch 3017013dcc "nvme-rdma: avoid race between time
out and tear down". There is no teardown_lock in nvme-fc.
Signed-off-by: James Smart <jsmart2021@gmail.com>
Tested-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
In case the number of hardware queues changes, we need to update the
tagset and the mapping of ctx to hctx first.
If we try to create and connect the I/O queues first, this operation
will fail (target will reject the connect call due to the wrong number
of queues) and hence we bail out of the recreate function. Then we
will to try the very same operation again, thus we don't make any
progress.
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Pull AFS fixes from David Howells:
"Fixes for AFS problems that can cause data corruption due to
interaction with another client modifying data cached locally:
- When d_revalidating a dentry, don't look at the inode to which it
points. Only check the directory to which the dentry belongs. This
was confusing things and causing the silly-rename cleanup code to
remove the file now at the dentry of a file that got deleted.
- Fix mmap data coherency. When a callback break is received that
relates to a file that we have cached, the data content may have
been changed (there are other reasons, such as the user's rights
having been changed). However, we're checking it lazily, only on
entry to the kernel, which doesn't happen if we have a writeable
shared mapped page on that file.
We make the kernel keep track of mmapped files and clear all PTEs
mapping to that file as soon as the callback comes in by calling
unmap_mapping_pages() (we don't necessarily want to zap the
pagecache). This causes the kernel to be reentered when userspace
tries to access the mmapped address range again - and at that point
we can query the server and, if we need to, zap the page cache.
Ideally, I would check each file at the point of notification, but
that involves poking the server[*] - which is holding an exclusive
lock on the vnode it is changing, waiting for all the clients it
notified to reply. This could then deadlock against the server.
Further, invalidating the pagecache might call ->launder_page(),
which would try to write to the file, which would definitely
deadlock. (AFS doesn't lease file access).
[*] Checking to see if the file content has changed is a matter of
comparing the current data version number, but we have to ask
the server for that. We also need to get a new callback promise
and we need to poke the server for that too.
- Add some more points at which the inode is validated, since we're
doing it lazily, notably in ->read_iter() and ->page_mkwrite(), but
also when performing some directory operations.
Ideally, checking in ->read_iter() would be done in some derivation
of filemap_read(). If we're going to call the server to read the
file, then we get the file status fetch as part of that.
- The above is now causing us to make a lot more calls to
afs_validate() to check the inode - and afs_validate() takes the
RCU read lock each time to make a quick check (ie.
afs_check_validity()). This is entirely for the purpose of checking
cb_s_break to see if the server we're using reinitialised its list
of callbacks - however this isn't a very common event, so most of
the time we're taking this needlessly.
Add a new cell-wide counter to count the number of
reinitialisations done by any server and check that - and only if
that changes, take the RCU read lock and check the server list (the
server list may change, but the cell a file is part of won't).
- Don't update vnode->cb_s_break and ->cb_v_break inside the validity
checking loop. The cb_lock is done with read_seqretry, so we might
go round the loop a second time after resetting those values - and
that could cause someone else checking validity to miss something
(I think).
Also included are patches for fixes for some bugs encountered whilst
debugging this:
- Fix a leak of afs_read objects and fix a leak of keys hidden by
that.
- Fix a leak of pages that couldn't be added to extend a writeback.
- Fix the maintenance of i_blocks when i_size is changed by a local
write or a local dir edit"
Link: https://bugzilla.kernel.org/show_bug.cgi?id=214217 [1]
Link: https://lore.kernel.org/r/163111665183.283156.17200205573146438918.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/163113612442.352844.11162345591911691150.stgit@warthog.procyon.org.uk/ # i_blocks patch
* tag 'afs-fixes-20210913' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
afs: Fix updating of i_blocks on file/dir extension
afs: Fix corruption in reads at fpos 2G-4G from an OpenAFS server
afs: Try to avoid taking RCU read lock when checking vnode validity
afs: Fix mmap coherency vs 3rd-party changes
afs: Fix incorrect triggering of sillyrename on 3rd-party invalidation
afs: Add missing vnode validation checks
afs: Fix page leak
afs: Fix missing put on afs_read objects and missing get on the key therein
Pull ksmbd server fixes from Steve French:
"Three ksmbd fixes, including an important security fix for path
processing, and a buffer overflow check, and a trivial fix for
incorrect header inclusion"
* tag '5.15-rc1-ksmbd' of git://git.samba.org/ksmbd:
ksmbd: add validation for FILE_FULL_EA_INFORMATION of smb2_get_info
ksmbd: prevent out of share access
ksmbd: transport_rdma: Don't include rwlock.h directly
Pull cifs client fixes from Steve French:
- two deferred close fixes (for bugs found with xfstests 478 and 461)
- a deferred close improvement in rename
- two trivial fixes for incorrect Linux comment formatting of multiple
cifs files (pointed out by automated kernel test robot and
checkpatch)
* tag '5.15-rc1-smb3' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Not to defer close on file when lock is set
cifs: Fix soft lockup during fsstress
cifs: Deferred close performance improvements
cifs: fix incorrect kernel doc comments
cifs: remove pathname for file from SPDX header
The function __bad_area_nosemaphore() calls kernelmode_fixup_or_oops()
with the parameter @signal being actually @pkey, which will send a
signal numbered with the argument in @pkey.
This bug can be triggered when the kernel fails to access user-given
memory pages that are protected by a pkey, so it can go down the
do_user_addr_fault() path and pass the !user_mode() check in
__bad_area_nosemaphore().
Most cases will simply run the kernel fixup code to make an -EFAULT. But
when another condition current->thread.sig_on_uaccess_err is met, which
is only used to emulate vsyscall, the kernel will generate the wrong
signal.
Add a new parameter @pkey to kernelmode_fixup_or_oops() to fix this.
[ bp: Massage commit message, fix build error as reported by the 0day
bot: https://lkml.kernel.org/r/202109202245.APvuT8BX-lkp@intel.com ]
Fixes: 5042d40a26 ("x86/fault: Bypass no_context() for implicit kernel faults from usermode")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jiashuo Liang <liangjs@pku.edu.cn>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20210730030152.249106-1-liangjs@pku.edu.cn
Pull spi fixes from Mark BrownL
"This contains a couple of fixes, one fix for handling of zero length
transfers on Rockchip devices and a warning fix which will conflict
with a version you did but cleans up some extra unneeded forward
declarations as well which seems a bit neater"
* tag 'spi-fix-v5.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: tegra20-slink: Declare runtime suspend and resume functions conditionally
spi: rockchip: handle zero length transfers without timing out
Pull regulator fixes from Mark Brown:
"A couple of small device specific fixes that have been sent since the
merge window, neither of which stands out particularly"
* tag 'regulator-fix-v5.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: max14577: Revert "regulator: max14577: Add proper module aliases strings"
regulator: qcom-rpmh-regulator: fix pm8009-1 ldo7 resource name
nvkm test builds fail with the following error.
drivers/gpu/drm/nouveau/nvkm/engine/device/ctrl.c: In function 'nvkm_control_mthd_pstate_info':
drivers/gpu/drm/nouveau/nvkm/engine/device/ctrl.c:60:35: error: overflow in conversion from 'int' to '__s8' {aka 'signed char'} changes value from '-251' to '5'
The code builds on most architectures, but fails on parisc where ENOSYS
is defined as 251.
Replace the error code with -ENODEV (-19). The actual error code does
not really matter and is not passed to userspace - it just has to be
negative.
Fixes: 7238eca4cf ("drm/nouveau: expose pstate selection per-power source in sysfs")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The code is unreachable for HVM or PVH, and it also makes little sense
in auto-translated environments. On Arm, with
xen_{create,destroy}_contiguous_region() both being stubs, I have a hard
time seeing what good the Xen specific variant does - the generic one
ought to be fine for all purposes there. Still Arm code explicitly
references symbols here, so the code will continue to be included there.
Instead of making PCI_XEN's "select" conditional, simply drop it -
SWIOTLB_XEN will be available unconditionally in the PV case anyway, and
is - as explained above - dead code in non-PV environments.
This in turn allows dropping the stubs for
xen_{create,destroy}_contiguous_region(), the former of which was broken
anyway - it failed to set the DMA handle output.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/5947b8ae-fdc7-225c-4838-84712265fc1e@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
xen_swiotlb and pci_xen_swiotlb_init() are only used within the file
defining them, so make them static and remove the stubs. Otoh
pci_xen_swiotlb_detect() has a use (as function pointer) from the main
pci-swiotlb.c file - convert its stub to a #define to NULL.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/aef5fc33-9c02-4df0-906a-5c813142e13c@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
The driver's module init function, pcifront_init(), invokes
xen_pv_domain() first thing. That construct produces constant "false"
when !CONFIG_XEN_PV. Hence there's no point building the driver in
non-PV configurations.
Drop the (now implicit and generally wrong) X86 dependency: At present,
XEN_PV can only be set when X86 is also enabled. In general an
architecture supporting Xen PV (and PCI) would want to have this driver
built.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/3a7f6c9b-215d-b593-8056-b5fe605dafd7@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
While the hypervisor hasn't been enforcing this, we would still better
avoid issuing requests with GFNs not aligned to the requested order.
Instead of altering the value also in the call to panic(), drop it
there for being static and hence easy to determine without being part
of the panic message.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/7b3998e3-1233-4e5a-89ec-d740e77eb166@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Guangbin Huang says:
====================
net: hns3: add some fixes for -net
This series adds some fixes for the HNS3 ethernet driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
hclge_get_reset_status() should return the tqp reset status.
However, if the CMDQ fails, the caller will take it as tqp reset
success status by mistake. Therefore, uses a parameters to get
the tqp reset status instead.
Fixes: 46a3df9f97 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The input parameters may not be reliable, so check the vlan id before
using it, otherwise may set wrong vlan id into hardware.
Fixes: dc8131d846 ("net: hns3: Fix for packet loss due wrong filter config in VLAN tbls")
Signed-off-by: liaoguojia <liaoguojia@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The input parameters may not be reliable. Before using the
queue id, we should check this parameter. Otherwise, memory
overwriting may occur.
Fixes: d341001846 ("net: hns3: refactor the mailbox message between PF and VF")
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
vport_id include PF and VFs, vport_id = 0 means PF, other values mean VFs.
So the actual vf id is equal to vport_id minus 1.
Some VF print logs are actually vport, and logs of vf id actually use
vport id, so this patch fixes them.
Fixes: ac887be5b0 ("net: hns3: change print level of RAS error log from warning to error")
Fixes: adcf738b80 ("net: hns3: cleanup some print format warning")
Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The vf id from ethtool is added 1 before configured to driver.
So it's necessary to minus 1 when printing it, in order to
keep consistent with user's configuration.
Fixes: dd74f815dd ("net: hns3: Add support for rule add/delete for flow director")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When user change rss 'hfunc' without set rss 'hkey' by ethtool
-X command, the driver will ignore the 'hfunc' for the hkey is
NULL. It's unreasonable. So fix it.
Fixes: 46a3df9f97 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Fixes: 374ad29176 ("net: hns3: Add RSS general configuration support for VF")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adding back the nonstandard ioctl commands caused -Wrestrict warnings
when building with 'make W=1':
drivers/staging/r8188eu/os_dep/ioctl_linux.c: In function 'rtw_mp_read_rf':
drivers/staging/r8188eu/os_dep/ioctl_linux.c:5515:27: error: 'sprintf' argument 3 overlaps destination object 'extra' [-Werror=restrict]
5515 | sprintf(extra, "%s %d", extra, strtou);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/staging/r8188eu/os_dep/ioctl_linux.c:5470:54: note: destination object referenced by 'restrict'-qualified argument 1 was declared here
5470 | struct iw_point *wrqu, char *extra)
| ~~~~~~^~~~~
Change these to the same construct used elsewhere in that driver,
with an offset to the string to make the warning go away.
The ioctl commands were previously removed, and it's unlikely that
anything is actually using them, so ideally I would prefer to have
them removed again.
The lack of range checking of the 'extra' output buffer is also
slightly worrying, but I did not check whether this could cause
harm.
Fixes: 2b42bd58b3 ("staging: r8188eu: introduce new os_dep dir for RTL8188eu driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210920095525.1150678-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Without CONFIG_COMMON_CLK, this fails to link:
arm-linux-gnueabi-ld: drivers/ptp/ptp_ocp.o: in function `ptp_ocp_register_i2c':
ptp_ocp.c:(.text+0xcc0): undefined reference to `__clk_hw_register_fixed_rate'
arm-linux-gnueabi-ld: ptp_ocp.c:(.text+0xcf4): undefined reference to `devm_clk_hw_register_clkdev'
arm-linux-gnueabi-ld: drivers/ptp/ptp_ocp.o: in function `ptp_ocp_detach':
ptp_ocp.c:(.text+0x1c24): undefined reference to `clk_hw_unregister_fixed_rate'
Fixes: a7e1abad13 ("ptp: Add clock driver for the OpenCompute TimeCard.")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
0xac24 device ID is already defined and used via
BANDB_DEVICE_ID_USO9ML2_4. Remove the duplicate from the list.
Fixes: 27f1281d5f ("USB: serial: Extra device/vendor ID for mos7840 driver")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
The smallest TX ring size we support must fit a TX SKB with MAX_SKB_FRAGS
+ 1. Because the first TX BD for a packet is always a long TX BD, we
need an extra TX BD to fit this packet. Define BNXT_MIN_TX_DESC_CNT with
this value to make this more clear. The current code uses a minimum
that is off by 1. Fix it using this constant.
The tx_wake_thresh to determine when to wake up the TX queue is half the
ring size but we must have at least BNXT_MIN_TX_DESC_CNT for the next
packet which may have maximum fragments. So the comparison of the
available TX BDs with tx_wake_thresh should be >= instead of > in the
current code. Otherwise, at the smallest ring size, we will never wake
up the TX queue and will cause TX timeout.
Fixes: c0c050c58d ("bnxt_en: New Broadcom ethernet driver.")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadocm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The resilient nexthop group torture tests in fib_nexthop.sh exposed a
possible division by zero while replacing a resilient group [1]. The
division by zero occurs when the data path sees a resilient nexthop
group with zero buckets.
The tests replace a resilient nexthop group in a loop while traffic is
forwarded through it. The tests do not specify the number of buckets
while performing the replacement, resulting in the kernel allocating a
stub resilient table (i.e, 'struct nh_res_table') with zero buckets.
This table should never be visible to the data path, but the old nexthop
group (i.e., 'oldg') might still be used by the data path when the stub
table is assigned to it.
Fix this by only assigning the stub table to the old nexthop group after
making sure the group is no longer used by the data path.
Tested with fib_nexthops.sh:
Tests passed: 222
Tests failed: 0
[1]
divide error: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 1850 Comm: ping Not tainted 5.14.0-custom-10271-ga86eb53057fe #1107
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-4.fc34 04/01/2014
RIP: 0010:nexthop_select_path+0x2d2/0x1a80
[...]
Call Trace:
fib_select_multipath+0x79b/0x1530
fib_select_path+0x8fb/0x1c10
ip_route_output_key_hash_rcu+0x1198/0x2da0
ip_route_output_key_hash+0x190/0x340
ip_route_output_flow+0x21/0x120
raw_sendmsg+0x91d/0x2e10
inet_sendmsg+0x9e/0xe0
__sys_sendto+0x23d/0x360
__x64_sys_sendto+0xe1/0x1b0
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Cc: stable@vger.kernel.org
Fixes: 283a72a559 ("nexthop: Add implementation of resilient next-hop groups")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The process will cause napi.state to contain NAPI_STATE_SCHED and
not in the poll_list, which will cause napi_disable() to get stuck.
The prefix "NAPI_STATE_" is removed in the figure below, and
NAPI_STATE_HASHED is ignored in napi.state.
CPU0 | CPU1 | napi.state
===============================================================================
napi_disable() | | SCHED | NPSVC
napi_enable() | |
{ | |
smp_mb__before_atomic(); | |
clear_bit(SCHED, &n->state); | | NPSVC
| napi_schedule_prep() | SCHED | NPSVC
| napi_poll() |
| napi_complete_done() |
| { |
| if (n->state & (NPSVC | | (1)
| _BUSY_POLL))) |
| return false; |
| ................ |
| } | SCHED | NPSVC
| |
clear_bit(NPSVC, &n->state); | | SCHED
} | |
| |
napi_schedule_prep() | | SCHED | MISSED (2)
(1) Here return direct. Because of NAPI_STATE_NPSVC exists.
(2) NAPI_STATE_SCHED exists. So not add napi.poll_list to sd->poll_list
Since NAPI_STATE_SCHED already exists and napi is not in the
sd->poll_list queue, NAPI_STATE_SCHED cannot be cleared and will always
exist.
1. This will cause this queue to no longer receive packets.
2. If you encounter napi_disable under the protection of rtnl_lock, it
will cause the entire rtnl_lock to be locked, affecting the overall
system.
This patch uses cmpxchg to implement napi_enable(), which ensures that
there will be no race due to the separation of clear two bits.
Fixes: 2d8bff1269 ("netpoll: Close race condition between poll_one_napi and napi_disable")
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
FPGA Manager fixes for 5.15
Tom and Jiapeng's fixes address smatch warnings around missing return
values in error cases.
Russ' change addresses an issue where registers are being accessed too
early resulting in invalid data being read.
All patches have been reviewed on the mailing list, and have been in the
last few linux-next releases (as part of my fixes branch) without issues.
Signed-off-by: Moritz Fischer <mdf@kernel.org>
* tag 'fpga-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga:
fpga: dfl: Avoid reads to AFU CSRs during enumeration
fpga: machxo2-spi: Fix missing error code in machxo2_write_complete()
fpga: machxo2-spi: Return an error on failure
Oded writes:
This tag contains the following fixes for 5.15-rc3:
- Fix potential race when user waiting for interrupt ioctl
- Prevent possible kernel oops in staged CS ioctl
- Use direct MSI mechanism in Gaudi as a WA for a H/W issue
regarding FLR
- Don't support collective wait ioctl operation when it
is not supported. e.g. when the NIC ports are disabled
- Fix configuration of one of the security mechanism.
- Change error print to be rate-limited as it can be initiated
by the user and spam the kernel log
- Fix return value of CS ioctl when doing staged CS
- Fix CS ioctl code when user doesn't supply an offset for
the memory area that we use as fence.
- Spelling mistake fix
* tag 'misc-habanalabs-fixes-2021-09-19' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux:
habanalabs: expose a single cs seq in staged submissions
habanalabs: fix wait offset handling
habanalabs: rate limit multi CS completion errors
habanalabs/gaudi: fix LBW RR configuration
habanalabs: Fix spelling mistake "FEADBACK" -> "FEEDBACK"
habanalabs: fail collective wait when not supported
habanalabs/gaudi: use direct MSI in single mode
habanalabs: fix kernel OOPs related to staged cs
habanalabs: fix potential race in interrupt wait ioctl
Attempt to mount 9p file system as root gives the following kernel panic:
9pnet_virtio: no channels available for device root
Kernel panic - not syncing: VFS: Unable to mount root "root" (9p), err=-2
CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.15.0-rc1+ #127
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Call Trace:
dump_stack_lvl+0x45/0x59
panic+0x1e2/0x44b
? __warn_printk+0xf3/0xf3
? free_unref_page+0x2d4/0x4a0
? trace_hardirqs_on+0x32/0x120
? free_unref_page+0x2d4/0x4a0
mount_root+0x189/0x1e0
prepare_namespace+0x136/0x165
kernel_init_freeable+0x3b8/0x3cb
? rest_init+0x2e0/0x2e0
kernel_init+0x19/0x130
ret_from_fork+0x1f/0x30
Kernel Offset: disabled
---[ end Kernel panic - not syncing: VFS: Unable to mount root "root" (9p), err=-2 ]---
QEMU command line:
"qemu-system-x86_64 -append root=/dev/root rw rootfstype=9p rootflags=trans=virtio ..."
This error is because root_device_name is truncated in prepare_namespace() from
being "/dev/root" to be "root" prior to call to mount_nodev_root().
As a solution, don't treat errors in mount_nodev_root() as errors that
require panics and allow failback to the mount flow that existed before
patch citied in Fixes tag.
Fixes: f9259be6a9 ("init: allow mounting arbitrary non-blockdevice filesystems as root")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
split_fs_names() currently takes comma separate list of filesystems
and converts it into individual filesystem strings. Pleaces these
strings in the input buffer passed by caller and returns number of
strings.
If caller manages to pass input string bigger than buffer, then we
can write beyond the buffer. Or if string just fits buffer, we will
still write beyond the buffer as we append a '\0' byte at the end.
Pass size of input buffer to split_fs_names() and put enough checks
in place so such buffer overrun possibilities do not occur.
This patch does few things.
- Add a parameter "size" to split_fs_names(). This specifies size
of input buffer.
- Use strlcpy() (instead of strcpy()) so that we can't go beyond
buffer size. If input string "names" is larger than passed in
buffer, input string will be truncated to fit in buffer.
- Stop appending extra '\0' character at the end and avoid one
possibility of going beyond the input buffer size.
- Do not use extra loop to count number of strings.
- Previously if one passed "rootfstype=foo,,bar", split_fs_names()
will return only 1 string "foo" (and "bar" will be truncated
due to extra ,). After this patch, now split_fs_names() will
return 3 strings ("foo", zero-sized-string, and "bar").
Callers of split_fs_names() have been modified to check for
zero sized string and skip to next one.
Reported-by: xu xin <xu.xin16@zte.com.cn>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Nathan Chancellor reports that the recent change to pci_iounmap in
commit 9caea00076 ("parisc: Declare pci_iounmap() parisc version only
when CONFIG_PCI enabled") causes build errors on arm64.
It took me about two hours to convince myself that I think I know what
the logic of that mess of #ifdef's in the <asm-generic/io.h> header file
really aim to do, and rewrite it to be easier to follow.
Famous last words.
Anyway, the code has now been lifted from that grotty header file into
lib/pci_iomap.c, and has fairly extensive comments about what the logic
is. It also avoids indirecting through another confusing (and badly
named) helper function that has other preprocessor config conditionals.
Let's see what odd architecture did something else strange in this area
to break things. But my arm64 cross build is clean.
Fixes: 9caea00076 ("parisc: Declare pci_iounmap() parisc version only when CONFIG_PCI enabled")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Ulrich Teichert <krypton@ulrich-teichert.org>
Cc: James Bottomley <James.Bottomley@hansenpartnership.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull x86 fixes from Borislav Petkov:
- Prevent a infinite loop in the MCE recovery on return to user space,
which was caused by a second MCE queueing work for the same page and
thereby creating a circular work list.
- Make kern_addr_valid() handle existing PMD entries, which are marked
not present in the higher level page table, correctly instead of
blindly dereferencing them.
- Pass a valid address to sanitize_phys(). This was caused by the
mixture of inclusive and exclusive ranges. memtype_reserve() expect
'end' being exclusive, but sanitize_phys() wants it inclusive. This
worked so far, but with end being the end of the physical address
space the fail is exposed.
- Increase the maximum supported GPIO numbers for 64bit. Newer SoCs
exceed the previous maximum.
* tag 'x86_urgent_for_v5.15_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Avoid infinite loop for copy from user recovery
x86/mm: Fix kern_addr_valid() to cope with existing but not present entries
x86/platform: Increase maximum GPIO number for X86_64
x86/pat: Pass valid address to sanitize_phys()
Pull perf event fix from Thomas Gleixner:
"A single fix for the perf core where a value read with READ_ONCE() was
checked and then reread which makes all the checks invalid. Reuse the
already read value instead"
* tag 'perf-urgent-2021-09-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
events: Reuse value read using READ_ONCE instead of re-reading it
Pull locking fixes from Thomas Gleixner:
"A set of updates for the RT specific reader/writer locking base code:
- Make the fast path reader ordering guarantees correct.
- Code reshuffling to make the fix simpler"
[ This plays ugly games with atomic_add_return_release() because we
don't have a plain atomic_add_release(), and should really be cleaned
up, I think - Linus ]
* tag 'locking-urgent-2021-09-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rwbase: Take care of ordering guarantee for fastpath reader
locking/rwbase: Extract __rwbase_write_trylock()
locking/rwbase: Properly match set_and_save_state() to restore_state()
Pull powerpc fixes from Michael Ellerman:
- Fix crashes when scv (System Call Vectored) is used to make a syscall
when a transaction is active, on Power9 or later.
- Fix bad interactions between rfscv (Return-from scv) and Power9
fake-suspend mode.
- Fix crashes when handling machine checks in LPARs using the Hash MMU.
- Partly revert a recent change to our XICS interrupt controller code,
which broke the recently added Microwatt support.
Thanks to Cédric Le Goater, Eirik Fuller, Ganesh Goudar, Gustavo Romero,
Joel Stanley, Nicholas Piggin.
* tag 'powerpc-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/xics: Set the IRQ chip data for the ICS native backend
powerpc/mce: Fix access error in mce handler
KVM: PPC: Book3S HV: Tolerate treclaim. in fake-suspend mode changing registers
powerpc/64s: system call rfscv workaround for TM bugs
selftests/powerpc: Add scv versions of the basic TM syscall tests
powerpc/64s: system call scv tabort fix for corrupt irq soft-mask state
Pull Kbuild fixes from Masahiro Yamada:
- Fix bugs in checkkconfigsymbols.py
- Fix missing sys import in gen_compile_commands.py
- Fix missing FORCE warning for ARCH=sh builds
- Fix -Wignored-optimization-argument warnings for Clang builds
- Turn -Wignored-optimization-argument into an error in order to stop
building instead of sprinkling warnings
* tag 'kbuild-fixes-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: Add -Werror=ignored-optimization-argument to CLANG_FLAGS
x86/build: Do not add -falign flags unconditionally for clang
kbuild: Fix comment typo in scripts/Makefile.modpost
sh: Add missing FORCE prerequisites in Makefile
gen_compile_commands: fix missing 'sys' package
checkkconfigsymbols.py: Remove skipping of help lines in parse_kconfig_file
checkkconfigsymbols.py: Forbid passing 'HEAD' to --commit
