Commit Graph

484 Commits

Author SHA1 Message Date
Jan Kara
53e872681f ext4: fix deadlock in journal_unmap_buffer()
We cannot wait for transaction commit in journal_unmap_buffer()
because we hold page lock which ranks below transaction start.  We
solve the issue by bailing out of journal_unmap_buffer() and
jbd2_journal_invalidatepage() with -EBUSY.  Caller is then responsible
for waiting for transaction commit to finish and try invalidation
again. Since the issue can happen only for page stradding i_size, it
is simple enough to manually call jbd2_journal_invalidatepage() for
such page from ext4_setattr(), check the return value and wait if
necessary.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-25 13:29:52 -05:00
Jan Kara
4520fb3c36 ext4: split off ext4_journalled_invalidatepage()
In data=journal mode we don't need delalloc or DIO handling in invalidatepage
and similarly in other modes we don't need the journal handling. So split
invalidatepage implementations.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-25 13:28:54 -05:00
Tao Ma
aef1c8513c ext4: let ext4_truncate handle inline data correctly
Signed-off-by: Robin Dong <sanbai@taobao.com>
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:06:02 -05:00
Tao Ma
9c3569b50f ext4: add delalloc support for inline data
For delayed allocation mode, we write to inline data if the file
is small enough. And in case of we write to some offset larger
than the inline size, the 1st page is dirtied, so that
ext4_da_writepages can handle the conversion. When the 1st page
is initialized with blocks, the inline part is removed.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:05:57 -05:00
Tao Ma
3fdcfb668f ext4: add journalled write support for inline data
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:05:57 -05:00
Tao Ma
f19d5870cb ext4: add normal write support for inline data
For a normal write case (not journalled write, not delayed
allocation), we write to the inline if the file is small and convert
it to an extent based file when the write is larger than the max
inline size.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:05:51 -05:00
Tao Ma
46c7f25454 ext4: add read support for inline data
Let readpage and readpages handle the case when we want to read an
inlined file.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:04:52 -05:00
Tao Ma
67cf5b09a4 ext4: add the basic function for inline data support
Implement inline data with xattr.

Now we use "system.data" to store xattr, and the xattr will
be extended if the i_size is increased while we don't release
the space during truncate.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:04:46 -05:00
Tao Ma
152a7b0a80 ext4: move extra inode read to a new function
Currently, in ext4_iget we do a simple check to see whether
there does exist some information starting from the end
of i_extra_size. With inline data added, this procedure
is more complicated. So move it to a new function named
ext4_iget_extra_inode.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-02 11:13:24 -05:00
Theodore Ts'o
69c499d152 ext4: restructure ext4_ext_direct_IO()
Remove a level of indentation by moving the DIO read and extending
write case to the beginning of the file.  This results in no actual
programmatic changes to the file, but makes it easier to
read/understand.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-11-29 21:13:48 -05:00
Theodore Ts'o
f3b59291a6 ext4: remove calls to ext4_jbd2_file_inode() from delalloc write path
The calls to ext4_jbd2_file_inode() are needed to guarantee that we do
not expose stale data in the data=ordered mode.  However, they are not
necessary because in all of the cases where we have newly allocated
blocks in the delayed allocation write path, we immediately submit the
dirty pages for I/O.  Hence, we can avoid the overhead of adding the
inode to the list of inodes whose data pages will be to be flushed out
to disk completely during the next commit operation.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-11-15 23:08:57 -05:00
Eric Sandeen
66bea92c69 ext4: init pagevec in ext4_da_block_invalidatepages
ext4_da_block_invalidatepages is missing a pagevec_init(),
which means that pvec->cold contains random garbage.

This affects whether the page goes to the front or
back of the LRU when ->cold makes it to
free_hot_cold_page()

Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
2012-11-14 22:22:05 -05:00
Zheng Liu
7d1b1fbc95 ext4: reimplement ext4_find_delay_alloc_range on extent status tree
Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: Allison Henderson <achender@linux.vnet.ibm.com>
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-11-08 21:57:35 -05:00
Zheng Liu
51865fda28 ext4: let ext4 maintain extent status tree
This patch lets ext4 maintain extent status tree.

Currently it only tracks delay extent status in extent status tree.  When a
delay allocation is issued, the related delay extent will be inserted into
extent status tree.  When a delay extent is written out or invalidated, it will
be removed from this tree.

Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: Allison Henderson <achender@linux.vnet.ibm.com>
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-11-08 21:57:32 -05:00
Anatol Pomozov
8b0f165f79 ext4: remove code duplication in ext4_get_block_write_nolock()
729f52c6be introduced function ext4_get_block_write_nolock() that
is very similar to _ext4_get_block(). Eliminate code duplication
by passing different flags to _ext4_get_block()

Tested: xfs tests

Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-11-08 15:07:16 -05:00
Linus Torvalds
6432f21284 The big new feature added this time is supporting online resizing
using the meta_bg feature.  This allows us to resize file systems
 which are greater than 16TB.  In addition, the speed of online
 resizing has been improved in general.
 
 We also fix a number of races, some of which could lead to deadlocks,
 in ext4's Asynchronous I/O and online defrag support, thanks to good
 work by Dmitry Monakhov.
 
 There are also a large number of more minor bug fixes and cleanups
 from a number of other ext4 contributors, quite of few of which have
 submitted fixes for the first time.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABCAAGBQJQbxMXAAoJENNvdpvBGATwlg4QAJZ4mHNSL2eaaxjRtTbL1pAz
 +FVXpJ3lhw1lSfE9hJGqPVE8EfU2fWjIqxEI7dgh95Tukc5pUnPAQ2/hBz8ZA0qq
 o0AFMk3mRnvCEh6HsZfumsV83eqpR3k/zEy4uFH+KtxBskPe2sEKy3B7qOxvgdKW
 Gh8B2WqF2BpIj9WIT1P9G6xsxZW64EMHTbWcgRhuoRD7bakDNnwQ3kElz/TJQU5q
 bM/5wE7pqKwU2J1L0Ho0mxDi0f/BbXeJdA9k1tQy2KM1pZwHtpj4Ls0qmfoi49GE
 KyZqQOXlFbAz/9tidPDceY5KoRRQm1MwZ+1MimQX1P+40cs/w3pNu3yiibcaXIru
 UZ63AQMCj5JHMcFNVi20sVCwjU/ibNtEO75cfDD4bzPgHJvfCj73EbHTLl21nbTu
 izIMffhJEHmRnmRXiiortYVuI4b19oIfnXg7eclrJoUWSuGwKKsJOc5nMjDqidG4
 B7Gq4TD89sGkIYzx+50E+ll2ispcBN0BQnGqp4k2BzgDyEHhuFYk7VuVQvJgCGTi
 eobzQJj7JUXPWxyemcAVkQTtUq4vVbkm/IwS+/GA9b9Z80X8hR8x6EVHUW5lX3qC
 YHoBSCU4XKZXXWqzx0fIVCXyKKFiBzM+OXcgHOKH90vK8k6kPmPODhNCxvV3pITU
 jfl9q+X1dY4SpybZjLt5
 =iYeV
 -----END PGP SIGNATURE-----

Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

Pull ext4 updates from Ted Ts'o:
 "The big new feature added this time is supporting online resizing
  using the meta_bg feature.  This allows us to resize file systems
  which are greater than 16TB.  In addition, the speed of online
  resizing has been improved in general.

  We also fix a number of races, some of which could lead to deadlocks,
  in ext4's Asynchronous I/O and online defrag support, thanks to good
  work by Dmitry Monakhov.

  There are also a large number of more minor bug fixes and cleanups
  from a number of other ext4 contributors, quite of few of which have
  submitted fixes for the first time."

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (69 commits)
  ext4: fix ext4_flush_completed_IO wait semantics
  ext4: fix mtime update in nodelalloc mode
  ext4: fix ext_remove_space for punch_hole case
  ext4: punch_hole should wait for DIO writers
  ext4: serialize truncate with owerwrite DIO workers
  ext4: endless truncate due to nonlocked dio readers
  ext4: serialize unlocked dio reads with truncate
  ext4: serialize dio nonlocked reads with defrag workers
  ext4: completed_io locking cleanup
  ext4: fix unwritten counter leakage
  ext4: give i_aiodio_unwritten a more appropriate name
  ext4: ext4_inode_info diet
  ext4: convert to use leXX_add_cpu()
  ext4: ext4_bread usage audit
  fs: reserve fallocate flag codepoint
  ext4: remove redundant offset check in mext_check_arguments()
  ext4: don't clear orphan list on ro mount with errors
  jbd2: fix assertion failure in commit code due to lacking transaction credits
  ext4: release donor reference when EXT4_IOC_MOVE_EXT ioctl fails
  ext4: enable FITRIM ioctl on bigalloc file system
  ...
2012-10-08 06:36:39 +09:00
Linus Torvalds
99dbb1632f Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull the trivial tree from Jiri Kosina:
 "Tiny usual fixes all over the place"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits)
  doc: fix old config name of kprobetrace
  fs/fs-writeback.c: cleanup riteback_sb_inodes kerneldoc
  btrfs: fix the commment for the action flags in delayed-ref.h
  btrfs: fix trivial typo for the comment of BTRFS_FREE_INO_OBJECTID
  vfs: fix kerneldoc for generic_fh_to_parent()
  treewide: fix comment/printk/variable typos
  ipr: fix small coding style issues
  doc: fix broken utf8 encoding
  nfs: comment fix
  platform/x86: fix asus_laptop.wled_type module parameter
  mfd: printk/comment fixes
  doc: getdelays.c: remember to close() socket on error in create_nl_socket()
  doc: aliasing-test: close fd on write error
  mmc: fix comment typos
  dma: fix comments
  spi: fix comment/printk typos in spi
  Coccinelle: fix typo in memdup_user.cocci
  tmiofb: missing NULL pointer checks
  tools: perf: Fix typo in tools/perf
  tools/testing: fix comment / output typos
  ...
2012-10-01 09:06:36 -07:00
Theodore Ts'o
041bbb6d36 ext4: fix mtime update in nodelalloc mode
Commits 5e8830dc85 and 41c4d25f78 introduced a regression into
v3.6-rc1 for ext4 in nodealloc mode, such that mtime updates would not
take place for files modified via mmap if the page was already in the
page cache.  This would also affect ext3 file systems mounted using
the ext4 file system driver.

The problem was that ext4_page_mkwrite() had a shortcut which would
avoid calling __block_page_mkwrite() under some circumstances, and the
above two commit transferred the responsibility of calling
file_update_time() to __block_page_mkwrite --- which woudln't get
called in some circumstances.

Since __block_page_mkwrite() only has three callers,
block_page_mkwrite(), ext4_page_mkwrite, and nilfs_page_mkwrite(), the
best way to solve this is to move the responsibility for calling
file_update_time() to its caller.

This problem was found via xfstests #215 with a file system mounted
with -o nodelalloc.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp>
Cc: stable@vger.kernel.org
2012-09-30 23:04:56 -04:00
Dmitry Monakhov
1f555cfa29 ext4: serialize truncate with owerwrite DIO workers
Jan Kara have spotted interesting issue:
There are  potential data corruption issue with  direct IO overwrites
racing with truncate:
 Like:
  dio write                      truncate_task
  ->ext4_ext_direct_IO
   ->overwrite == 1
    ->down_read(&EXT4_I(inode)->i_data_sem);
    ->mutex_unlock(&inode->i_mutex);
                               ->ext4_setattr()
                                ->inode_dio_wait()
                                ->truncate_setsize()
                                ->ext4_truncate()
                                 ->down_write(&EXT4_I(inode)->i_data_sem);
    ->__blockdev_direct_IO
     ->ext4_get_block
     ->submit_io()
    ->up_read(&EXT4_I(inode)->i_data_sem);
                                 # truncate data blocks, allocate them to
                                 # other inode - bad stuff happens because
                                 # dio is still in flight.

In order to serialize with truncate dio worker should grab extra i_dio_count
reference before drop i_mutex.

Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-09-29 00:58:26 -04:00
Dmitry Monakhov
1b65007e98 ext4: endless truncate due to nonlocked dio readers
If we have enough aggressive DIO readers, truncate and other dio
waiters will wait forever inside inode_dio_wait(). It is reasonable
to disable nonlock DIO read optimization during truncate.

Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-09-29 00:56:15 -04:00
Dmitry Monakhov
1c9114f9c0 ext4: serialize unlocked dio reads with truncate
Current serialization will works only for DIO which holds
i_mutex, but nonlocked DIO following race is possible:

dio_nolock_read_task            truncate_task
				->ext4_setattr()
				 ->inode_dio_wait()
->ext4_ext_direct_IO
  ->ext4_ind_direct_IO
    ->__blockdev_direct_IO
      ->ext4_get_block
				 ->truncate_setsize()
				 ->ext4_truncate()
				 #alloc truncated blocks
				 #to other inode
      ->submit_io()
     #INFORMATION LEAK

In order to serialize with unlocked DIO reads we have to
rearrange wait sequence
1) update i_size first
2) if i_size about to be reduced wait for outstanding DIO requests
3) and only after that truncate inode blocks

Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-09-29 00:55:23 -04:00
Dmitry Monakhov
17335dcc47 ext4: serialize dio nonlocked reads with defrag workers
Inode's block defrag and ext4_change_inode_journal_flag() may
affect nonlocked DIO reads result, so proper synchronization
required.

- Add missed inode_dio_wait() calls where appropriate
- Check inode state under extra i_dio_count reference.

Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-09-29 00:41:21 -04:00
Dmitry Monakhov
28a535f9a0 ext4: completed_io locking cleanup
Current unwritten extent conversion state-machine is very fuzzy.
- For unknown reason it performs conversion under i_mutex. What for?
  My diagnosis:
  We already protect extent tree with i_data_sem, truncate and punch_hole
  should wait for DIO, so the only data we have to protect is end_io->flags
  modification, but only flush_completed_IO and end_io_work modified this
  flags and we can serialize them via i_completed_io_lock.

  Currently all these games with mutex_trylock result in the following deadlock
   truncate:                          kworker:
    ext4_setattr                       ext4_end_io_work
    mutex_lock(i_mutex)
    inode_dio_wait(inode)  ->BLOCK
                             DEADLOCK<- mutex_trylock()
                                        inode_dio_done()
  #TEST_CASE1_BEGIN
  MNT=/mnt_scrach
  unlink $MNT/file
  fallocate -l $((1024*1024*1024)) $MNT/file
  aio-stress -I 100000 -O -s 100m -n -t 1 -c 10 -o 2 -o 3 $MNT/file
  sleep 2
  truncate -s 0 $MNT/file
  #TEST_CASE1_END

Or use 286's xfstests https://github.com/dmonakhov/xfstests/blob/devel/286

This patch makes state machine simple and clean:

(1) xxx_end_io schedule final extent conversion simply by calling
    ext4_add_complete_io(), which append it to ei->i_completed_io_list
    NOTE1: because of (2A) work should be queued only if
    ->i_completed_io_list was empty, otherwise the work is scheduled already.

(2) ext4_flush_completed_IO is responsible for handling all pending
    end_io from ei->i_completed_io_list
    Flushing sequence consists of following stages:
    A) LOCKED: Atomically drain completed_io_list to local_list
    B) Perform extents conversion
    C) LOCKED: move converted io's to to_free list for final deletion
       	     This logic depends on context which we was called from.
    D) Final end_io context destruction
    NOTE1: i_mutex is no longer required because end_io->flags modification
    is protected by ei->ext4_complete_io_lock

Full list of changes:
- Move all completion end_io related routines to page-io.c in order to improve
  logic locality
- Move open coded logic from various xx_end_xx routines to ext4_add_complete_io()
- remove EXT4_IO_END_FSYNC
- Improve SMP scalability by removing useless i_mutex which does not
  protect io->flags anymore.
- Reduce lock contention on i_completed_io_lock by optimizing list walk.
- Rename ext4_end_io_nolock to end4_end_io and make it static
- Check flush completion status to ext4_ext_punch_hole(). Because it is
  not good idea to punch blocks from corrupted inode.

Changes since V3 (in request to Jan's comments):
  Fall back to active flush_completed_IO() approach in order to prevent
  performance issues with nolocked DIO reads.
Changes since V2:
  Fix use-after-free caused by race truncate vs end_io_work

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-09-29 00:14:55 -04:00
Dmitry Monakhov
f45ee3a1ea ext4: ext4_inode_info diet
Generic inode has unused i_private pointer which may be used as cur_aio_dio
storage.

TODO: If cur_aio_dio will be passed as an argument to get_block_t this allow
      to have concurent AIO_DIO requests.

Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-09-28 23:21:09 -04:00
Jan Kara
b71fc079b5 ext4: fix fdatasync() for files with only i_size changes
Code tracking when transaction needs to be committed on fdatasync(2) forgets
to handle a situation when only inode's i_size is changed. Thus in such
situations fdatasync(2) doesn't force transaction with new i_size to disk
and that can result in wrong i_size after a crash.

Fix the issue by updating inode's i_datasync_tid whenever its size is
updated.

CC: <stable@vger.kernel.org> # >= 2.6.32
Reported-by: Kristian Nielsen <knielsen@knielsen-hq.org>
Signed-off-by: Jan Kara <jack@suse.cz>
2012-09-26 21:52:20 -04:00
Theodore Ts'o
00d4e7362e ext4: fix potential deadlock in ext4_nonda_switch()
In ext4_nonda_switch(), if the file system is getting full we used to
call writeback_inodes_sb_if_idle().  The problem is that we can be
holding i_mutex already, and this causes a potential deadlock when
writeback_inodes_sb_if_idle() when it tries to take s_umount.  (See
lockdep output below).

As it turns out we don't need need to hold s_umount; the fact that we
are in the middle of the write(2) system call will keep the superblock
pinned.  Unfortunately writeback_inodes_sb() checks to make sure
s_umount is taken, and the VFS uses a different mechanism for making
sure the file system doesn't get unmounted out from under us.  The
simplest way of dealing with this is to just simply grab s_umount
using a trylock, and skip kicking the writeback flusher thread in the
very unlikely case that we can't take a read lock on s_umount without
blocking.

Also, we now check the cirteria for kicking the writeback thread
before we decide to whether to fall back to non-delayed writeback, so
if there are any outstanding delayed allocation writes, we try to get
them resolved as soon as possible.

   [ INFO: possible circular locking dependency detected ]
   3.6.0-rc1-00042-gce894ca #367 Not tainted
   -------------------------------------------------------
   dd/8298 is trying to acquire lock:
    (&type->s_umount_key#18){++++..}, at: [<c02277d4>] writeback_inodes_sb_if_idle+0x28/0x46

   but task is already holding lock:
    (&sb->s_type->i_mutex_key#8){+.+...}, at: [<c01ddcce>] generic_file_aio_write+0x5f/0xd3

   which lock already depends on the new lock.

   2 locks held by dd/8298:
    #0:  (sb_writers#2){.+.+.+}, at: [<c01ddcc5>] generic_file_aio_write+0x56/0xd3
    #1:  (&sb->s_type->i_mutex_key#8){+.+...}, at: [<c01ddcce>] generic_file_aio_write+0x5f/0xd3

   stack backtrace:
   Pid: 8298, comm: dd Not tainted 3.6.0-rc1-00042-gce894ca #367
   Call Trace:
    [<c015b79c>] ? console_unlock+0x345/0x372
    [<c06d62a1>] print_circular_bug+0x190/0x19d
    [<c019906c>] __lock_acquire+0x86d/0xb6c
    [<c01999db>] ? mark_held_locks+0x5c/0x7b
    [<c0199724>] lock_acquire+0x66/0xb9
    [<c02277d4>] ? writeback_inodes_sb_if_idle+0x28/0x46
    [<c06db935>] down_read+0x28/0x58
    [<c02277d4>] ? writeback_inodes_sb_if_idle+0x28/0x46
    [<c02277d4>] writeback_inodes_sb_if_idle+0x28/0x46
    [<c026f3b2>] ext4_nonda_switch+0xe1/0xf4
    [<c0271ece>] ext4_da_write_begin+0x27/0x193
    [<c01dcdb0>] generic_file_buffered_write+0xc8/0x1bb
    [<c01ddc47>] __generic_file_aio_write+0x1dd/0x205
    [<c01ddce7>] generic_file_aio_write+0x78/0xd3
    [<c026d336>] ext4_file_write+0x480/0x4a6
    [<c0198c1d>] ? __lock_acquire+0x41e/0xb6c
    [<c0180944>] ? sched_clock_cpu+0x11a/0x13e
    [<c01967e9>] ? trace_hardirqs_off+0xb/0xd
    [<c018099f>] ? local_clock+0x37/0x4e
    [<c0209f2c>] do_sync_write+0x67/0x9d
    [<c0209ec5>] ? wait_on_retry_sync_kiocb+0x44/0x44
    [<c020a7b9>] vfs_write+0x7b/0xe6
    [<c020a9a6>] sys_write+0x3b/0x64
    [<c06dd4bd>] syscall_call+0x7/0xb

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
2012-09-19 22:42:36 -04:00
Carlos Maiolino
90b0a97323 ext4: fix possible non-initialized variable in htree_dirblock_to_tree()
htree_dirblock_to_tree() declares a non-initialized 'err' variable,
which is passed as a reference to another functions expecting them to
set this variable with their error codes.

It's passed to ext4_bread(), which then passes it to ext4_getblk(). If
ext4_map_blocks() returns 0 due to a lookup failure, leaving the
ext4_getblk() buffer_head uninitialized, it will make ext4_getblk()
return to ext4_bread() without initialize the 'err' variable, and
ext4_bread() will return to htree_dirblock_to_tree() with this variable
still uninitialized.  htree_dirblock_to_tree() will pass this variable
with garbage back to ext4_htree_fill_tree(), which expects a number of
directory entries added to the rb-tree. which, in case, might return a
fake non-zero value due the garbage left in the 'err' variable, leading
the kernel to an Oops in ext4_dx_readdir(), once this is expecting a
filled rb-tree node, when in turn it will have a NULL-ed one, causing an
invalid page request when trying to get a fname struct from this NULL-ed
rb-tree node in this line:

fname = rb_entry(info->curr_node, struct fname, rb_hash);

The patch itself initializes the err variable in
htree_dirblock_to_tree() to avoid usage mistakes by the called
functions, and also fix ext4_getblk() to return a initialized 'err'
variable when ext4_map_blocks() fails a lookup.

Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-09-17 23:39:12 -04:00
Anatol Pomozov
4907cb7b19 treewide: fix comment/printk/variable typos
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-09-01 10:33:05 -07:00
Zheng Liu
8a2f8460e8 ext4: remove duplicated declarations in inode.c
In patch cb20d51883, ext4_set_bh_endio
and ext4_end_io_buffer_write are declared at the beginning of inode.c,
and again later on in the middle of the file.  Remove the second set
of duplicated function declarations.

Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-08-19 18:07:40 -04:00
Artem Bityutskiy
f6463b0da6 ext4: nuke pdflush from comments
The pdflush thread is long gone, so this patch removes references to pdflush
from ext4 comments.

Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-08-04 12:15:34 +04:00
Artem Bityutskiy
7652bdfcb5 ext4: nuke write_super from comments
The '->write_super' superblock method is gone, and this patch removes all the
references to 'write_super' from ext3.

Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-08-04 12:15:33 +04:00
Linus Torvalds
a0e881b7c1 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull second vfs pile from Al Viro:
 "The stuff in there: fsfreeze deadlock fixes by Jan (essentially, the
  deadlock reproduced by xfstests 068), symlink and hardlink restriction
  patches, plus assorted cleanups and fixes.

  Note that another fsfreeze deadlock (emergency thaw one) is *not*
  dealt with - the series by Fernando conflicts a lot with Jan's, breaks
  userland ABI (FIFREEZE semantics gets changed) and trades the deadlock
  for massive vfsmount leak; this is going to be handled next cycle.
  There probably will be another pull request, but that stuff won't be
  in it."

Fix up trivial conflicts due to unrelated changes next to each other in
drivers/{staging/gdm72xx/usb_boot.c, usb/gadget/storage_common.c}

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (54 commits)
  delousing target_core_file a bit
  Documentation: Correct s_umount state for freeze_fs/unfreeze_fs
  fs: Remove old freezing mechanism
  ext2: Implement freezing
  btrfs: Convert to new freezing mechanism
  nilfs2: Convert to new freezing mechanism
  ntfs: Convert to new freezing mechanism
  fuse: Convert to new freezing mechanism
  gfs2: Convert to new freezing mechanism
  ocfs2: Convert to new freezing mechanism
  xfs: Convert to new freezing code
  ext4: Convert to new freezing mechanism
  fs: Protect write paths by sb_start_write - sb_end_write
  fs: Skip atime update on frozen filesystem
  fs: Add freezing handling to mnt_want_write() / mnt_drop_write()
  fs: Improve filesystem freezing handling
  switch the protection of percpu_counter list to spinlock
  nfsd: Push mnt_want_write() outside of i_mutex
  btrfs: Push mnt_want_write() outside of i_mutex
  fat: Push mnt_want_write() outside of i_mutex
  ...
2012-08-01 10:26:23 -07:00
Jan Kara
8e8ad8a57c ext4: Convert to new freezing mechanism
We remove most of frozen checks since upper layer takes care of blocking all
writes. We have to handle protection in ext4_page_mkwrite() in a special way
because we cannot use generic block_page_mkwrite(). Also we add a freeze
protection to ext4_evict_inode() so that iput() of unlinked inode cannot modify
a frozen filesystem (we cannot easily instrument ext4_journal_start() /
ext4_journal_stop() with freeze protection because we are missing the
superblock pointer in ext4_journal_stop() in nojournal mode).

CC: linux-ext4@vger.kernel.org
CC: "Theodore Ts'o" <tytso@mit.edu>
BugLink: https://bugs.launchpad.net/bugs/897421
Tested-by: Kamal Mostafa <kamal@canonical.com>
Tested-by: Peter M. Petrakis <peter.petrakis@canonical.com>
Tested-by: Dann Frazier <dann.frazier@canonical.com>
Tested-by: Massimo Morana <massimo.morana@canonical.com>
Acked-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-31 09:45:48 +04:00
Theodore Ts'o
03179fe923 ext4: undo ext4_calc_metadata_amount if we fail to claim space
The function ext4_calc_metadata_amount() has side effects, although
it's not obvious from its function name.  So if we fail to claim
space, regardless of whether we retry to claim the space again, or
return an error, we need to undo these side effects.

Otherwise we can end up incorrectly calculating the number of metadata
blocks needed for the operation, which was responsible for an xfstests
failure for test #271 when using an ext2 file system with delalloc
enabled.

Reported-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
2012-07-23 00:00:20 -04:00
Brian Foster
97795d2a5b ext4: don't let i_reserved_meta_blocks go negative
If we hit a condition where we have allocated metadata blocks that
were not appropriately reserved, we risk underflow of
ei->i_reserved_meta_blocks.  In turn, this can throw
sbi->s_dirtyclusters_counter significantly out of whack and undermine
the nondelalloc fallback logic in ext4_nonda_switch().  Warn if this
occurs and set i_allocated_meta_blocks to avoid this problem.

This condition is reproduced by xfstests 270 against ext2 with
delalloc enabled:

Mar 28 08:58:02 localhost kernel: [  171.526344] EXT4-fs (loop1): delayed block allocation failed for inode 14 at logical offset 64486 with max blocks 64 with error -28
Mar 28 08:58:02 localhost kernel: [  171.526346] EXT4-fs (loop1): This should not happen!! Data will be lost

270 ultimately fails with an inconsistent filesystem and requires an
fsck to repair.  The cause of the error is an underflow in
ext4_da_update_reserve_space() due to an unreserved meta block
allocation.

Signed-off-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
2012-07-22 23:59:40 -04:00
Artem Bityutskiy
b50924c2c6 ext4: remove unnecessary argument from __ext4_handle_dirty_metadata()
The '__ext4_handle_dirty_metadata()' does not need the 'now' argument
anymore and we can kill it.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
2012-07-22 20:37:31 -04:00
Zheng Liu
4bd809dbbf ext4: don't take the i_mutex lock when doing DIO overwrites
Aligned and overwrite direct I/O can be parallelized.  In
ext4_file_dio_write, we first check whether these conditions are
satisfied or not.  If so, we take i_data_sem and release i_mutex lock
directly.  Meanwhile iocb->private is set to indicate that this is a
dio overwrite, and it will be handled in ext4_ext_direct_IO.

[ Added fix from Dan Carpenter to fix locking bug on the error path. ]

CC: Tao Ma <tm@tao.ma>
CC: Eric Sandeen <sandeen@redhat.com>
CC: Robin Dong <hao.bigrat@gmail.com>
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
2012-07-22 20:19:31 -04:00
Zheng Liu
729f52c6be ext4: add a new nolock flag in ext4_map_blocks
EXT4_GET_BLOCKS_NO_LOCK flag is added to indicate that we don't need
to acquire i_data_sem lock in ext4_map_blocks.  Meanwhile, it changes
ext4_get_block() to not start a new journal because when we do a
overwrite dio, there is no any metadata that needs to be modified.

We define a new function called ext4_get_block_write_nolock, which is
used in dio overwrite nolock.  In this function, it doesn't try to
acquire i_data_sem lock and doesn't start a new journal as it does a
lookup.

CC: Tao Ma <tm@tao.ma>
CC: Eric Sandeen <sandeen@redhat.com>
CC: Robin Dong <hao.bigrat@gmail.com>
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-07-09 16:29:29 -04:00
Linus Torvalds
4edebed866 Ext4 updates for 3.5
The major new feature added in this update is Darrick J. Wong's
 metadata checksum feature, which adds crc32 checksums to ext4's
 metadata fields.  There is also the usual set of cleanups and bug
 fixes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.10 (GNU/Linux)
 
 iQIcBAABCAAGBQJPyNleAAoJENNvdpvBGATwtLMP/i3WsPyTvxmYP6HttHXQb8Jk
 GYCoTQ5bZMuTbOwOGg3w137cXWBv5uuPpxIk79YVLHSWx6HuanlGIa7/VnPKIaLu
 2ihuvVfnrDqpwQ4MJaSq4R1Eka9JCwZ7HbYYo+fYOVobxgw588JVV9VVI9EdKRGz
 z11UkW8iHE0f6Xa5gOhdAMkR0uaPnxwJX/qHZYiHuognRivuwMglqWJSiMr8nQmo
 A2GmeoLehhW+k65IqgTCmSW6ZgFTvZdk6bskQIij3fOYHW3hHn/gcLFtmLTIZ/B5
 LZdg/lngPYve+R/UyypliGKi+pv1qNEiTiBm0rrBgsdZFkBdGj0soSvGZzeK+Mp4
 Q1vAmOBPYPFzs6nVzPst2n/osryyykFCK6TgSGZ50dosJ0NO8cBeDdX/gh9JKD2R
 yQUMUltOCCSj/eWU4iwqZ0T3FXRiH/+S3XMHznoKJiwUyGDBNQy4+Yg2k2WzUXrz
 Cu5t5BwNG2WNP7y5Et/wmUIzpC7VPId4qYmGyHe7OwTxSJgW+6f7GVkHfjWcDMuv
 pGgEUiInbMmLajP3v2/LKfVU4hXLZy4uJbhoBgDdeIpZrnPifJG/MwDOS4W+dLVT
 tDzgO1SAh3/E4jATreZ5bjzD/HGsfe1OX09UH3Pbc1EcgkrLnyrQXFwdHshdVu4A
 cxMoKNPVCQJySb1UrLkO
 =SdJJ
 -----END PGP SIGNATURE-----

Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

Pull Ext4 updates from Theodore Ts'o:
 "The major new feature added in this update is Darrick J Wong's
  metadata checksum feature, which adds crc32 checksums to ext4's
  metadata fields.

  There is also the usual set of cleanups and bug fixes."

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (44 commits)
  ext4: hole-punch use truncate_pagecache_range
  jbd2: use kmem_cache_zalloc wrapper instead of flag
  ext4: remove mb_groups before tearing down the buddy_cache
  ext4: add ext4_mb_unload_buddy in the error path
  ext4: don't trash state flags in EXT4_IOC_SETFLAGS
  ext4: let getattr report the right blocks in delalloc+bigalloc
  ext4: add missing save_error_info() to ext4_error()
  ext4: add debugging trigger for ext4_error()
  ext4: protect group inode free counting with group lock
  ext4: use consistent ssize_t type in ext4_file_write()
  ext4: fix format flag in ext4_ext_binsearch_idx()
  ext4: cleanup in ext4_discard_allocated_blocks()
  ext4: return ENOMEM when mounts fail due to lack of memory
  ext4: remove redundundant "(char *) bh->b_data" casts
  ext4: disallow hard-linked directory in ext4_lookup
  ext4: fix potential integer overflow in alloc_flex_gd()
  ext4: remove needs_recovery in ext4_mb_init()
  ext4: force ro mount if ext4_setup_super() fails
  ext4: fix potential NULL dereference in ext4_free_inodes_counts()
  ext4/jbd2: add metadata checksumming to the list of supported features
  ...
2012-06-01 10:12:15 -07:00
Tao Ma
9660755100 ext4: let getattr report the right blocks in delalloc+bigalloc
In delayed allocation, i_reserved_data_blocks now indicates
clusters, not blocks. So report it in the right number.

This can be easily exposed by the following command:
echo foo > blah; du -hc blah; sync; du -hc blah

Reported-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-05-31 22:54:16 -04:00
Eric W. Biederman
08cefc7ab8 userns: Convert ext4 to user kuid/kgid where appropriate
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-05-15 14:59:27 -07:00
Darrick J. Wong
feb0ab32a5 ext4: make block group checksums use metadata_csum algorithm
metadata_csum supersedes uninit_bg.  Convert the ROCOMPAT uninit_bg
flag check to a helper function that covers both, and make the
checksum calculation algorithm use either crc16 or the metadata_csum
chosen algorithm depending on which flag is set.  Print a warning if
we try to mount a filesystem with both feature flags set.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-04-29 18:45:10 -04:00
Darrick J. Wong
814525f4df ext4: calculate and verify inode checksums
This patch introduces to ext4 the ability to calculate and verify
inode checksums.  This requires the use of a new ro compatibility flag
and some accompanying e2fsprogs patches to provide the relevant
features in tune2fs and e2fsck.  The inode generation changes have
been integrated into this patch.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-04-29 18:31:10 -04:00
Darrick J. Wong
a9c4731780 ext4: calculate and verify superblock checksum
Calculate and verify the superblock checksum.  Since the UUID and
block group number are embedded in each copy of the superblock, we
need only checksum the entire block.  Refactor some of the code to
eliminate open-coding of the checksum update call.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-04-29 18:29:10 -04:00
Artem Bityutskiy
1b8b9750f0 ext4: do not mark superblock as dirty unnecessarily
Commit a0375156ca cleaned up superblock
dirtying handling, but missed one place. This patch does what was
intended: if we have the journal, then we update the superblock
through the journal rather than doing this directly.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-03-21 22:28:29 -04:00
Allison Henderson
7335519274 ext4: correct ext4_punch_hole return codes
ext4_punch_hole returns -ENOTSUPP but it should be using -EOPNOTSUPP

Signed-off-by: Allison Henderson <achender@linux.vnet.ibm.com>
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-03-21 22:23:31 -04:00
Lukas Czerner
afcff5d80a ext4: remove restrictive checks for EOFBLOCKS_FL
We are going to remove the EOFBLOCKS_FL flag in the future, so this is
the first part of the removal. We can not remove it entirely just now,
since the e2fsck is still checking for it and it might cause headache to
some people. Instead, remove the restrictive checks now and the rest
later, when the new e2fsck code is out and common enough.

This is also needed because punch hole already breaks the EOFBLOCKS_FL
semantics, so it might cause the some troubles. So simply remove it.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-03-21 21:47:55 -04:00
Theodore Ts'o
92b9781658 ext4: change some printk() calls to use ext4_msg() instead
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-03-19 23:41:49 -04:00
Theodore Ts'o
1084f252e3 ext4: remove trailing newlines from ext4_msg() and ext4_error() messages
The functions ext4_msg() and ext4_error() already tack on a trailing
newline, so remove the unnecessary extra newline.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-03-19 23:13:43 -04:00
Joe Perches
ace36ad431 ext4: add no_printk argument validation, fix fallout
Add argument validation to debug functions.
Use ##__VA_ARGS__.

Fix format and argument mismatches.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-03-19 23:11:43 -04:00