Commit Graph

55257 Commits

Author SHA1 Message Date
Jiri Benc
7c383fb225 ip_tunnels: use tos and ttl fields also for IPv6
Rename the ipv4_tos and ipv4_ttl fields to just 'tos' and 'ttl', as they'll
be used with IPv6 tunnels, too.

Signed-off-by: Jiri Benc <jbenc@redhat.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-20 15:42:36 -07:00
Jiri Benc
c1ea5d672a ip_tunnels: add IPv6 addresses to ip_tunnel_key
Add the IPv6 addresses as an union with IPv4 ones. When using IPv4, the
newly introduced padding after the IPv4 addresses needs to be zeroed out.

Signed-off-by: Jiri Benc <jbenc@redhat.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-20 15:42:36 -07:00
Jeremy Linton
938049e18d net: xgene Remove xgene specific phy and MAC lookup functions
Convert the xgene_get_mac_address to device_get_mac_address(), and
xgene_get_phy_mode() to device_get_phy_mode().

Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-20 14:43:49 -07:00
Jeremy Linton
4d14a63400 smsc911x: Remove dev==NULL check.
The dev==NULL check in smsc911x_probe_config is useless
and isn't providing any additional protection. If a fwnode
doesn't exist then an appropriate error should be returned
by device_get_phy_mode() covering the original case
of a missing of/fwnode.

Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-20 14:36:25 -07:00
David S. Miller
ef09242f39 Major changes:
ath10k:
 
 * add support for qca99x0 family of devices
 * improve performance of tx_lock
 * add support for raw mode (802.11 frame format) and software crypto
   engine enabled via a module parameter
 
 ath9k:
 
 * add fast-xmit support
 
 wil6210:
 
 * implement TSO support
 * support bootloader v1 and onwards
 
 iwlwifi:
 
 * Deprecate -10.ucode
 * Clean ups towards multiple Rx queues
 * Add support for longer CMD IDs. This will be required by new
   firmwares since we are getting close to the u8 limit.
 * bugfixes for the D0i3 power state
 * Add basic support for FTM
 * polish the Miracast operation
 * fix a few power consumption issues
 * scan cleanup
 * fixes for D0i3 system state
 * add paging for devices that support it
 * add again the new RBD allocation model
 * add more options to the firmware debug system
 * add support for frag SKBs in Tx
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJV1FziAAoJEG4XJFUm622bEJwH/RdNlAK4+IS9Tx0K6EA2fDE3
 001J16in/1IPPr8/RmQWNzHGN5/GAYlAdl5v4fkwb8qvcDCyPlQbSEC8ghd32H6M
 G1101qEfGk9bhLTpI8xjeqsT1gl98LswPYNAfoRX4AJKAmNCkfJ1WILLi/Q2DUOf
 oG6IersuqQOdQbkXDnMm49FBZeSkVvzsJL+WQhKhYblh0bDH3qGuLcYvtkSnt+P8
 8QG5X+DPEpmaYcu+5E5N0XgffsdPj/+xXlFova4DFySDYb4OzEH1MYp/rHjPpnUo
 nDJqxZIgkkmhu0CGtvpWNeSZ7GQBI0Bzdd+dwBY5yyg5AqWuQ5A1W+4r3SjvHyU=
 =A8Ax
 -----END PGP SIGNATURE-----

Merge tag 'wireless-drivers-next-for-davem-2015-08-19' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
Major changes:

ath10k:

* add support for qca99x0 family of devices
* improve performance of tx_lock
* add support for raw mode (802.11 frame format) and software crypto
  engine enabled via a module parameter

ath9k:

* add fast-xmit support

wil6210:

* implement TSO support
* support bootloader v1 and onwards

iwlwifi:

* Deprecate -10.ucode
* Clean ups towards multiple Rx queues
* Add support for longer CMD IDs. This will be required by new
  firmwares since we are getting close to the u8 limit.
* bugfixes for the D0i3 power state
* Add basic support for FTM
* polish the Miracast operation
* fix a few power consumption issues
* scan cleanup
* fixes for D0i3 system state
* add paging for devices that support it
* add again the new RBD allocation model
* add more options to the firmware debug system
* add support for frag SKBs in Tx
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-20 14:13:25 -07:00
Johannes Berg
11ab35ed04 rt2x00: use DECLARE_EWMA
Instead of using the out-of-line EWMA calculation, use DECLARE_EWMA()
to create static inlines. On x86/64 this results in code that's one
byte larger (for me), but reduces struct link_ant and struct link
size by the two unsigned long values that store the parameters each.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-20 14:10:22 -07:00
Johannes Berg
46f26ddf56 ath5k: use DECLARE_EWMA
This reduces code size slightly (at least on x86/64) while also
removing memory consumption by two unsigned long values for each
ath5k device.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-20 14:10:22 -07:00
Johannes Berg
5377d75823 virtio_net: use DECLARE_EWMA
Instead of using the out-of-line EWMA calculation, use DECLARE_EWMA()
to create static inlines. On x86/64 this results in no change in code
size for me, but reduces the struct receive_queue size by the two
unsigned long values that store the parameters.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-20 14:10:22 -07:00
Yuval Mintz
0f8f27de19 bnx2x: Fix vxlan endianity issue
Commit f34fa14cc0 ("bnx2x: Add vxlan RSS support") has introduced an
endianity issue when passing the vxlan UDP port to the HW.

Reported-by: <fengguang.wu@intel.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-20 14:08:08 -07:00
Nikolay Aleksandrov
2640b39c28 vrf: ndo_add|del_slave drop unnecessary checks
When ndo_add|del_slave ops are used, they're taken from the respective
master device's netdev ops, so if the master device is a VRF only then
the VRF ops will get called thus no need to check the type of the
master.

Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-20 13:01:57 -07:00
Nikolay Aleksandrov
15df5e7112 vrf: move vrf_insert_slave so we can drop a goto label
We can simplify do_vrf_add_slave by moving vrf_insert_slave in the end
of the enslaving and thus eliminate an error goto label. It always
succeeds and isn't needed before that anyway.

Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-20 13:01:57 -07:00
Nikolay Aleksandrov
67f3a90b54 vrf: remove unnecessary duplicate check
The upper/lower functions already check for duplicate slaves so no need
to do it again.

Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-20 13:01:57 -07:00
Nikolay Aleksandrov
e367da02fe vrf: don't panic on cache create failure
It's pointless to panic on cache create failure when that case is handled
and even more so since it's not a kernel-wide fatal problem so don't
panic.

Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-20 13:01:56 -07:00
Nikolay Aleksandrov
57b8efa1a5 vrf: plug skb leaks
Currently whenever a packet different from ETH_P_IP is sent through the
VRF device it is leaked so plug the leaks and properly drop these
packets.

Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-20 12:59:42 -07:00
David S. Miller
def63be85f Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue
Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates 2015-08-18

This series contains updates to igb, e100, e1000e and ixgbe.

Shota Suzuki provides a fix for a possible overflow in
igb_set_interrupt_capability() which leads to an oops.  When changing the
number of queues by "ethtool -L", set IGB_FLAG_QUEUE_PAIRS in the same
manner as when initializing the igb driver.

Vasily Averin provides a fix for a missing rtnl_unlock() for when we
error out due to not being able to allocate memory for our queues.

Stefan Assman provides a couple of fixes for igb/igbvf.  First changes
the igb driver in probe to simply call igb_enable_sriov() instead of
igb_sriov_reinit() since we are starting from scratch.  Then in igbvf,
fix the driver where it does not clear the buffer_info->dma in all
cases after calling dma_unmap_single(), which was found by changing the
MTU twice.

Richard Cochran implements the periodic output function using the
programmable clock outputs available in i210 when possible, falling
back to the target time for longer periods.

Todd adds support for the Marvell PHY 1512 which is required for i354
devices.  Then updates igb to make sure SR-IOV init uses the correct
number of queues, since recent changes could result in the PF holding
onto all of the queues.

Alex Williamson provides a fix in the case where a guest OS does not
support hot-unplug, so disable SR-IOV prior to unregister_netdev() to
avoid the problem.

Jia-Ju Bai provides several patches, first knocks some collecting dust
off an old e100 driver to add a check to avoid a null pointer
dereference.  Then cleans up a possible resource leak by releasing the
skb buffer allocated when the e100_xmit_prepare() runs into an issue
in the DMA mapping.  In igb, add a missing rtnl_unlock() for when we
error out due to igb_sriov_reinit() in the igb_init_interrupt_scheme().
Provides a e1000e fix, based on suggestions from Alex Duyck to move
head/tail register writing to e1000_configure_tx/rx() to avoid a
possible null pointer dereference (similar to igb driver).  Lastly,
fix a possible memory leak in igb_probe(), where the memory shadow_vfta
allocated by kcalloc in igb_sw_init() is not freed.

Mark simplifies port-specific macros for ixgbe by eliminating explicit
comparisons with 0 and enclose formal parameters in parens to eliminate
the risk of an operator precedence issue.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18 20:21:32 -07:00
Nikolay Aleksandrov
58aa90875d vrf: simplify the netdev notifier function
We can drop the check because if vrf_ptr is present then we must have
the vrf device as a master and since we're running with rtnl it can't go
away.

Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18 20:16:52 -07:00
Nikolay Aleksandrov
3a4a27d3bd vrf: don't check for dstats and rth in uninit path
dstats and rth are always present because we fail the device registration
if they can't be allocated in vrf_init() (ndo_init) so drop the unnecessary
checks.

Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18 20:16:52 -07:00
Nikolay Aleksandrov
db5dbec5ef vrf: drop unused num_slaves member
slave_queue has a num_slaves member which is unused, drop it.

Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18 20:16:52 -07:00
Nikolay Aleksandrov
17d95f5ee2 vrf: drop unnecessary dev refcnt changes
netdev_master_upper_dev_link/unlink already do a dev_hold/put on the
devices being linked, so no need to take another reference.

Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18 20:16:52 -07:00
Andrew Schwartzmeyer
954591b9f3 hv_netvsc: Fix dereference of nvdev before check
Passes static analysis by Smatch.

Signed-off-by: Andrew Schwartzmeyer <andschwa@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18 20:15:01 -07:00
Dan Carpenter
c938a00344 cxgb4: memory corruption in debugfs
You can't use kstrtoul() with an int or it causes memory corruption.
Also j should be unsigned or we have underflow bugs.

I considered changing "j" to unsigned long but everything fits in a u32.

Fixes: 8e3d04fd7d ('cxgb4: Add MPS tracing support')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18 19:06:58 -07:00
David S. Miller
3dc33e2322 enic: Fix namespace pollution causing build errors.
drivers/net/built-in.o: In function `.vnic_wq_devcmd2_alloc':
(.text+0x49fe40): multiple definition of `.vnic_wq_devcmd2_alloc'
drivers/scsi/built-in.o:(.text+0xb4318): first defined here
drivers/net/built-in.o:(.opd+0x2af00): multiple definition of `vnic_wq_devcmd2_alloc'
drivers/scsi/built-in.o:(.opd+0xad70): first defined here
drivers/net/built-in.o: In function `.vnic_wq_init_start':
(.text+0x49f9c0): multiple definition of `.vnic_wq_init_start'
drivers/scsi/built-in.o:(.text+0xb3b58): first defined here
drivers/net/built-in.o:(.opd+0x2ae88): multiple definition of `vnic_wq_init_start'
drivers/scsi/built-in.o:(.opd+0xace0): first defined here

Rename these to 'enic_*' to avoid the conflict with the functiosn of
the same name in the snic scsi driver.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18 14:24:30 -07:00
Rajesh Borundia
f34fa14cc0 bnx2x: Add vxlan RSS support
Latest FW submission added some vxlan offload capabilities to our device.
This patch adds the ability to connect to the vxlan NDOs and configure
the UDP port associated with it in the HW.

The device would now be capable of performing RSS according to the
inner headers of the vxlan packets.

Signed-off-by: Rajesh Borundia <Rajesh.Borundia@qlogic.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18 14:21:10 -07:00
Andrew Lunn
6083ce715f dsa: mv88e6xxx: Set DSA mode based on chip abilities
Older devices only support a single DSA frame format, where as newer
devices have two. Take this into account when configuring a DSA port.
The port needs to be in plain old DSA mode, since this is a DSA link,
where as the newer format can be used for the CPU port.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18 14:17:21 -07:00
Andrew Lunn
60045cbfc0 net: dsa: Add dsa_is_dsa_port() helper
Add an inline helper for determining is a port is a DSA port.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18 14:17:21 -07:00
Jacob Keller
56d1392f2f ixgbe: TRIVIAL fix up double 'the' and comment style
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-08-18 14:06:07 -07:00
Mark Rustad
d147329b0a ixgbe: Simplify port-specific macros
Simplify port-specific macros by eliminating explicit comparison
with 0. More importantly, enclose formal parameter in parens to
eliminate the risk of an operator precedence surprise.

Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-08-18 14:06:07 -07:00
Todd Fujinaka
ceee3450b3 igb: make sure SR-IOV init uses the right number of queues
Recent changes to igb_probe_vfs() could lead to the PF holding onto all
of the queues. Reorder igb_probe_vfs() to be before
gb_init_queue_configuration() and add some more error checking.

Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-08-18 14:06:07 -07:00
Stefan Assmann
fae5ecaee3 igbvf: clear buffer_info->dma after dma_unmap_single()
The driver doesn't clear buffer_info->dma after calling
dma_unmap_single() in all cases. This has been discovered by changing
the mtu twice, which caused the following backtrace.

[   68.569280] WARNING: CPU: 2 PID: 1860 at drivers/iommu/intel-iommu.c:3517 intel_unmap+0x20c/0x220()
[   68.579392] Driver unmaps unmatched page at PFN fffc2a40
[   68.585322] Modules linked in: igbvf ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat kvm_intel kvm igb megs
[   68.599163] CPU: 2 PID: 1860 Comm: ifconfig Not tainted 4.2.0-rc4+ #147
[   68.606543] Hardware name: IBM  -[546025Z]-/00Y7630, BIOS -[VVE134TUS-1.51]- 10/17/2013
[   68.615473]  0000000000000dbd ffff88046441bb08 ffffffff81a5ad0b ffffffff81e2f9ea
[   68.623775]  ffff88046441bb58 ffff88046441bb48 ffffffff81056b55 ffff88047fc583c0
[   68.632075]  0000000000000000 ffff880469a8e600 00000000fffc2a40 ffff880465b32098
[   68.640375] Call Trace:
[   68.643109]  [<ffffffff81a5ad0b>] dump_stack+0x48/0x5d
[   68.648844]  [<ffffffff81056b55>] warn_slowpath_common+0x95/0xe0
[   68.655549]  [<ffffffff81056c56>] warn_slowpath_fmt+0x46/0x70
[   68.661960]  [<ffffffff8158a614>] ? find_iova+0x54/0x90
[   68.667791]  [<ffffffff815988dc>] intel_unmap+0x20c/0x220
[   68.673815]  [<ffffffff8159891e>] intel_unmap_page+0xe/0x10
[   68.680038]  [<ffffffffa0067536>] igbvf_clean_rx_ring+0x96/0x370 [igbvf]
[   68.687516]  [<ffffffffa0067915>] igbvf_down+0x105/0x110 [igbvf]
[   68.694219]  [<ffffffffa0067beb>] igbvf_change_mtu+0x16b/0x180 [igbvf]
[...]

Signed-off-by: Stefan Assmann <sassmann@kpanic.de>
Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-08-18 14:06:06 -07:00
Jia-Ju Bai
42ad1a03b4 igb: Fix a memory leak in igb_probe
In error handling code of igb_probe, the memory adapter->shadow_vfta
allocated by kcalloc in igb_sw_init is not freed. So when register_netdev
or igb_init_i2c is failed, a memory leak will occur.
This patch adds kfree to fix it.

Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-08-18 14:06:06 -07:00
Jia-Ju Bai
0845d45e90 e1000e: Modify Tx/Rx configurations to avoid null pointer dereferences in e1000_open
When e1000e_setup_rx_resources is failed in e1000_open,
e1000e_free_tx_resources in "err_setup_rx" segment is executed.
"writel(0, tx_ring->head)" statement in e1000_clean_tx_ring
in e1000e_free_tx_resources will cause a null poonter dereference(crash),
because "tx_ring->head" is only assigned in e1000_configure_tx
in e1000_configure, but it is after e1000e_setup_rx_resources.

This patch moves head/tail register writing to e1000_configure_tx/rx,
which can fix this problem. It is inspired by igb_configure_tx_ring
in the igb driver.

Specially, thank Alexander Duyck for his valuable suggestion.

Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-08-18 14:06:06 -07:00
Jia-Ju Bai
3eb14ea8d9 igb: Fix a deadlock in igb_sriov_reinit
When igb_init_interrupt_scheme in igb_sriov_reinit is failed, the lock
acquired by rtnl_lock() is not released, which causes a deadlock.
This patch adds rtnl_unlock() in error handling to fix it.

Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-08-18 14:06:05 -07:00
Jia-Ju Bai
5e5d49422d e100: Release skb when DMA mapping is failed in e100_xmit_prepare
When pci_dma_mapping_error in e100_xmit_prepare is failed, the skb buffer
allocated by netdev_alloc_skb_ip_align in e100_rx_alloc_skb is not
released, which causes a possible resource leak.
This patch adds error handling code to fix it.

Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-08-18 14:06:05 -07:00
Jia-Ju Bai
9ad607b4a9 e100: Add a check after pci_pool_create to avoid null pointer dereference
The driver lacks the check of nic->cbs_pool after pci_pool_create
in e100_probe. When this function is failed, a null pointer dereference
occurs when pci_pool_alloc uses nic->cbs_pool in e100_alloc_cbs.
This patch adds a check and related error handling code to fix it.

Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-08-18 14:06:05 -07:00
Alex Williamson
c23d92b80e igb: Teardown SR-IOV before unregister_netdev()
When the .remove() callback for a PF is called, SR-IOV support for the
device is disabled, which requires unbinding and removing the VFs.
The VFs may be in-use either by the host kernel or userspace, such as
assigned to a VM through vfio-pci.  In this latter case, the VFs may
be removed either by shutting down the VM or hot-unplugging the
devices from the VM.  Unfortunately in the case of a Windows 2012 R2
guest, hot-unplug is broken due to the ordering of the PF driver
teardown.  Disabling SR-IOV prior to unregister_netdev() avoids this
issue.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-08-18 14:06:05 -07:00
Todd Fujinaka
51045ecff0 igb: add support for 1512 PHY
This patch adds support for Marvell PHY 1512 (required for I354).

Submitted by: Maciej Szwed <maciej.szwed@intel.com>
Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-08-18 14:06:04 -07:00
Richard Cochran
30c72916d7 igb: implement high frequency periodic output signals
In addition to interrupt driven target time output events, the i210
also has two programmable clock outputs.  These clocks support periods
between 16 nanoseconds and 140 milliseconds.  This patch implements
the periodic output function using the clock outputs when possible,
falling back to the target time for longer periods.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-08-18 14:06:04 -07:00
Stefan Assmann
6423fc3416 igb: do not re-init SR-IOV during probe
During driver probing the following code path is triggered.
igb_probe
->igb_sw_init
  ->igb_probe_vfs
    ->igb_pci_enable_sriov
      ->igb_sriov_reinit

Doing the SR-IOV re-init is not necessary during probing since we're
starting from scratch. Here we can call igb_enable_sriov() right away.

Running igb_sriov_reinit() during igb_probe() also seems to cause
occasional packet loss on some onboard 82576 NICs. Reproduced on
Dell and HP servers with onboard 82576 NICs.
Example:
Intel Corporation 82576 Gigabit Network Connection [8086:10c9] (rev 01)
Subsystem: Dell Device [1028:0481]

Signed-off-by: Stefan Assmann <sassmann@kpanic.de>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-08-18 14:06:04 -07:00
Vasily Averin
f468adc944 igb: missing rtnl_unlock in igb_sriov_reinit()
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-08-18 14:06:03 -07:00
Shota Suzuki
72ddef0506 igb: Fix oops caused by missing queue pairing
When initializing igb driver (e.g. 82576, I350), IGB_FLAG_QUEUE_PAIRS is
set if adapter->rss_queues exceeds half of max_rss_queues in
igb_init_queue_configuration().
On the other hand, IGB_FLAG_QUEUE_PAIRS is not set even if the number of
queues exceeds half of max_combined in igb_set_channels() when changing
the number of queues by "ethtool -L".
In this case, if numvecs is larger than MAX_MSIX_ENTRIES (10), the size
of adapter->msix_entries[], an overflow can occur in
igb_set_interrupt_capability(), which in turn leads to an oops.

Fix this problem as follows:
 - When changing the number of queues by "ethtool -L", set
   IGB_FLAG_QUEUE_PAIRS in the same way as initializing igb driver.
 - When increasing the size of q_vector, reallocate it appropriately.
   (With IGB_FLAG_QUEUE_PAIRS set, the size of q_vector gets larger.)

Another possible way to fix this problem is to cap the queues at its
initial number, which is the number of the initial online cpus. But this
is not the optimal way because we cannot increase queues when another
cpu becomes online.

Note that before commit cd14ef54d2 ("igb: Change to use statically
allocated array for MSIx entries"), this problem did not cause oops
but just made the number of queues become 1 because of entering msi_only
mode in igb_set_interrupt_capability().

Fixes: 907b783579 ("igb: Add ethtool support to configure number of channels")
CC: stable <stable@vger.kernel.org>
Signed-off-by: Shota Suzuki <suzuki_shota_t3@lab.ntt.co.jp>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-08-18 14:06:03 -07:00
Phil Sutter
4676a15207 net: caif: convert to using IFF_NO_QUEUE
Signed-off-by: Phil Sutter <phil@nwl.cc>
Cc: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18 11:55:07 -07:00
Phil Sutter
3db6da1f07 net: mac80211_hwsim: convert to using IFF_NO_QUEUE
Signed-off-by: Phil Sutter <phil@nwl.cc>
Cc: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18 11:55:07 -07:00
Phil Sutter
3a9c0a1bb8 net: hostap: convert to using IFF_NO_QUEUE
Signed-off-by: Phil Sutter <phil@nwl.cc>
Cc: Jouni Malinen <j@w1.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18 11:55:07 -07:00
Phil Sutter
bf485bcf0d net: ipvlan: convert to using IFF_NO_QUEUE
Signed-off-by: Phil Sutter <phil@nwl.cc>
Cc: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18 11:55:06 -07:00
Phil Sutter
1e6f20ca6c net: bonding: convert to using IFF_NO_QUEUE
Signed-off-by: Phil Sutter <phil@nwl.cc>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <gospo@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18 11:55:06 -07:00
Phil Sutter
22dba393a3 net: vxlan: convert to using IFF_NO_QUEUE
Signed-off-by: Phil Sutter <phil@nwl.cc>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18 11:55:05 -07:00
Phil Sutter
22e380a649 net: team: convert to using IFF_NO_QUEUE
Signed-off-by: Phil Sutter <phil@nwl.cc>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18 11:55:05 -07:00
Phil Sutter
85773a61a3 net: nlmon: convert to using IFF_NO_QUEUE
Signed-off-by: Phil Sutter <phil@nwl.cc>
Cc: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18 11:55:05 -07:00
Phil Sutter
e65db2b724 net: loopback: convert to using IFF_NO_QUEUE
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18 11:55:05 -07:00
Phil Sutter
ed961ac233 net: geneve: convert to using IFF_NO_QUEUE
Signed-off-by: Phil Sutter <phil@nwl.cc>
Cc: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18 11:55:05 -07:00