Patch b2a846dbef ("gfs2: Ignore journal log writes for jdata holes")
tried (unsuccessfully) to fix a case in which writes were done to jdata
blocks, the blocks are sent to the ail list, then a punch_hole or truncate
operation caused the blocks to be freed. In other words, the ail items
are for jdata holes. Before b2a846dbef, the jdata hole caused function
gfs2_block_map to return -EIO, which was eventually interpreted as an
IO error to the journal, and then withdraw.
This patch changes function gfs2_get_block_noalloc, which is only used
for jdata writes, so it returns -ENODATA rather than -EIO, and when
-ENODATA is returned to gfs2_ail1_start_one, the error is ignored.
We can safely ignore it because gfs2_ail1_start_one is only called
when the jdata pages have already been written and truncated, so the
ail1 content no longer applies.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
This reverts commit b2a846dbef.
That commit changed the behavior of function gfs2_block_map to return
-ENODATA in cases where a hole (IOMAP_HOLE) is encountered and create is
false. While that fixed the intended problem for jdata, it also broke
other callers of gfs2_block_map such as some jdata block reads. Before
the patch, an encountered hole would be skipped and the buffer seen as
unmapped by the caller. The patch changed the behavior to return
-ENODATA, which is interpreted as an error by the caller.
The -ENODATA return code should be restricted to the specific case where
jdata holes are encountered during ail1 writes. That will be done in a
later patch.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
In the fail path of gfs2_check_blk_type, forgetting to call
gfs2_glock_dq_uninit will result in rgd_gh reference leak.
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Commit fc0e38dae6 ("GFS2: Fix glock deallocation race") fixed a
sd_glock_disposal accounting bug by adding a missing atomic_dec
statement, but it failed to wake up sd_glock_wait when that decrement
causes sd_glock_disposal to reach zero. As a consequence,
gfs2_gl_hash_clear can now run into a 10-minute timeout instead of
being woken up. Add the missing wakeup.
Fixes: fc0e38dae6 ("GFS2: Fix glock deallocation race")
Cc: stable@vger.kernel.org # v2.6.39+
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Right now, we can end up calling cancel_delayed_work_sync from within
delete_work_func via gfs2_lookup_by_inum -> gfs2_inode_lookup ->
gfs2_cancel_delete_work. When that happens, it will result in a
deadlock. Instead, gfs2_inode_lookup should skip the call to
gfs2_cancel_delete_work when called from delete_work_func (blktype ==
GFS2_BLKST_UNLINKED).
Reported-by: Alexander Ahring Oder Aring <aahringo@redhat.com>
Fixes: a0e3cc65fa ("gfs2: Turn gl_delete into a delayed work")
Cc: stable@vger.kernel.org # v5.8+
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, gfs2_fitrim was not properly checking for a "live" file
system. If the file system had something to trim and the file system
was read-only (or spectator) it would start the trim, but when it starts
the transaction, gfs2_trans_begin returns -EROFS (read-only file system)
and it errors out. However, if the file system was already trimmed so
there's no work to do, it never called gfs2_trans_begin. That code is
bypassed so it never returns the error. Instead, it returns a good
return code with 0 work. All this makes for inconsistent behavior:
The same fstrim command can return -EROFS in one case and 0 in another.
This tripped up xfstests generic/537 which reports the error as:
+fstrim with unrecovered metadata just ate your filesystem
This patch adds a check for a "live" (iow, active journal, iow, RW)
file system, and if not, returns the error properly.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Before commit 97fd734ba1, the local statfs_changeX inode was never
initialized for spectator mounts. However, it still checks for
spectator mounts when unmounting everything. There's no good reason to
lookup the statfs_changeX files because spectators cannot perform recovery.
It still, however, needs the master statfs file for statfs calls.
This patch adds the check for spectator mounts to init_statfs.
Fixes: 97fd734ba1 ("gfs2: lookup local statfs inodes prior to journal recovery")
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, function gfs2_meta_sync called filemap_fdatawrite to write
the address space for the metadata being synced. That's great for inodes, but
resource groups all point to the same superblock-address space, sdp->sd_aspace.
Each rgrp has its own range of blocks on which it should operate. That meant
every time an rgrp's metadata was synced, it would write all of them instead
of just the range.
This patch eliminates function gfs2_meta_sync and tailors specific metasync
functions for inodes and rgrps.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Hi,
Before this patch, function init_journal's "undo" directive jumped to label
fail_jinode_gh. But now that it does statfs initialization, it needs to
jump to fail_statfs instead. Failure to do so means that mount failures
after init_journal is successful will neglect to let go of the proper
statfs information, stranding the statfs_changeX inodes. This makes it
impossible to free its glocks, and results in:
gfs2: fsid=sda.s: G: s:EX n:2/805f f:Dqob t:EX d:UN/603701000 a:0 v:0 r:4 m:200 p:1
gfs2: fsid=sda.s: H: s:EX f:H e:0 p:1397947 [(ended)] init_journal+0x548/0x890 [gfs2]
gfs2: fsid=sda.s: I: n:6/32863 t:8 f:0x00 d:0x00000201 s:24 p:0
gfs2: fsid=sda.s: G: s:SH n:5/805f f:Dqob t:SH d:UN/603712000 a:0 v:0 r:3 m:200 p:0
gfs2: fsid=sda.s: H: s:SH f:EH e:0 p:1397947 [(ended)] gfs2_inode_lookup+0x1fb/0x410 [gfs2]
VFS: Busy inodes after unmount of sda. Self-destruct in 5 seconds. Have a nice day...
The next time the file system is mounted, it then reuses the same glocks,
which ends in a kernel NULL pointer dereference when trying to dump the
reused glock.
This patch makes the "undo" function of init_journal jump to fail_statfs
so the statfs files are properly deconstructed upon failure.
Fixes: 97fd734ba1 ("gfs2: lookup local statfs inodes prior to journal recovery")
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Gfs2 creates an address space for its rgrps called sd_aspace, but it never
called truncate_inode_pages_final on it. This confused vfs greatly which
tried to reference the address space after gfs2 had freed the superblock
that contained it.
This patch adds a call to truncate_inode_pages_final for sd_aspace, thus
avoiding the use-after-free.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Function gfs2_clear_rgrpd calls kfree(rgd->rd_bits) before calling
return_all_reservations, but return_all_reservations still dereferences
rgd->rd_bits in __rs_deltree. Fix that by moving the call to kfree below the
call to return_all_reservations.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Apply the outstanding statfs changes in the journal head to the
master statfs file. Zero out the local statfs file for good measure.
Previously, statfs updates would be read in from the local statfs inode and
synced to the master statfs inode during recovery.
We now use the statfs updates in the journal head to update the master statfs
inode instead of reading in from the local statfs inode. To preserve backward
compatibility with kernels that can't do this, we still need to keep the
local statfs inode up to date by writing changes to it. At some point in the
future, we can do away with the local statfs inodes altogether and keep the
statfs changes solely in the journal.
Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
We need to lookup the master statfs inode and the local statfs
inodes earlier in the mount process (in init_journal) so journal
recovery can use them when it attempts to recover the statfs info.
We lookup all the local statfs inodes and store them in a linked
list to allow a node to recover statfs info for other nodes in the
cluster.
Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
And read these in __get_log_header() from the log header.
Also make gfs2_statfs_change_out() non-static so it can be used
outside of super.c
Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
The gfs2_glock structure has a gl_vm member, introduced in commit 7005c3e4ae
("GFS2: Use range based functions for rgrp sync/invalidation"), which stores
the location of resource groups within their address space. This structure is
in a union with iopen glock specific fields. It was introduced because at
unmount time, the resource group objects were destroyed before flushing out any
pending resource group glock work, and flushing out such work could require
flushing / truncating the address space.
Since commit b3422cacdd ("gfs2: Rework how rgrp buffer_heads are managed"),
any pending resource group glock work is flushed out before destroying the
resource group objects. So the resource group objects will now always exist in
rgrp_go_sync and rgrp_go_inval, and we now simply compute the gl_vm values
where needed instead of caching them. This also eliminates the union.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Only initialize gl_delete for iopen glocks, but more importantly, only access
it for iopen glocks in flush_delete_work: flush_delete_work is called for
different types of glocks including rgrp glocks, and those use gl_vm which is
in a union with gl_delete. Without this fix, we'll end up clobbering gl_vm,
which results in general memory corruption.
Fixes: a0e3cc65fa ("gfs2: Turn gl_delete into a delayed work")
Cc: stable@vger.kernel.org # v5.8+
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
The comments before function glock_hash_walk had the wrong name and
an extra parameter. This simply fixes the comments.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, glock.c maintained a flag, GLF_QUEUED, which indicated
when a glock had a holder queued. It was only checked for inode glocks,
although set and cleared by all glocks, and it was only used to determine
whether the glock should be held for the minimum hold time before releasing.
The problem is that the flag is not accurate at all. If a process holds
the glock, the flag is set. When they dequeue the glock, it only cleared
the flag in cases when the state actually changed. So if the state doesn't
change, the flag may still be set, even when nothing is queued.
This happens to iopen glocks often: the get held in SH, then the file is
closed, but the glock remains in SH mode.
We don't need a special flag to indicate this: we can simply tell whether
the glock has any items queued to the holders queue. It's a waste of cpu
time to maintain it.
This patch eliminates the flag in favor of simply checking list_empty
on the glock holders.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
When flushing out its ail1 list, gfs2_write_jdata_page calls function
__block_write_full_page passing in function gfs2_get_block_noalloc.
But there was a problem when a process wrote to a jdata file, then
truncated it or punched a hole, leaving references to the blocks within
the new hole in its ail list, which are to be written to the journal log.
In writing them to the journal, after calling gfs2_block_map, function
gfs2_get_block_noalloc determined that the (hole-punched) block was not
mapped, so it returned -EIO to generic_writepages, which passed it back
to gfs2_ail1_start_one. This, in turn, performed a withdraw, assuming
there was a real IO error writing to the journal.
This might be a valid error when writing metadata to the journal, but for
journaled data writes, it does not warrant a withdraw.
This patch adds a check to function gfs2_block_map that makes an exception
for journaled data writes that correspond to jdata holes: If the iomap
get function returns a block type of IOMAP_HOLE, it instead returns
-ENODATA which does not cause the withdraw. Other errors are returned as
before.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Function gfs2_block_map had a lot of redundancy between its create and
no_create paths. This patch simplifies the code to eliminate the redundancy.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
With jdata writes, we frequently got into situations where gfs2 deadlocked
because of this calling sequence:
gfs2_ail1_start
gfs2_ail1_flush - for every tr on the sd_ail1_list:
gfs2_ail1_start_one - for every bd on the tr's tr_ail1_list:
generic_writepages
write_cache_pages passing __writepage()
calls clear_page_dirty_for_io which calls set_page_dirty:
which calls jdata_set_page_dirty which sets PageChecked.
__writepage() calls
mapping->a_ops->writepage AKA gfs2_jdata_writepage
However, gfs2_jdata_writepage checks if PageChecked is set, and if so, it
ignores the write and redirties the page. The problem is that write_cache_pages
calls clear_page_dirty_for_io, which often calls set_page_dirty(). See comments
in page-writeback.c starting with "Yes, Virginia". If it's jdata,
set_page_dirty will call jdata_set_page_dirty which will set PageChecked.
That causes a conflict because it makes it look like the page has been
redirtied by another writer, in which case we need to skip writing it and
redirty the page. That ends up in a deadlock because it isn't a "real" writer
and nothing will ever clear PageChecked.
If we do have a real writer, it will have started a transaction. So this
patch checks if a transaction is in use, and if not, it skips setting
PageChecked. That way, the page will be dirtied, cleaned, and written
appropriately.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Patch 380f7c65a7 changed gfs2_releasepage
so that it held the sd_ail_lock spin_lock for most of its processing.
It did this for some mysterious undocumented bug somewhere in the
evict code path. But in the nine years since, evict has been reworked
and fixed many times, and so have the transactions and ail list.
I can't see a reason to hold the sd_ail_lock unless it's protecting
the actual ail lists hung off the transactions. Therefore, this patch
removes the locking to increase speed and efficiency, and to further help
us rework the log flush code to be more concurrent with transactions.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
This patch is one baby step toward simplifying the journal management.
It simply changes function gfs2_ail1_empty_one from a void to an int and
makes it return a count of active items. This allows the caller to check
the return code rather than list_empty on the tr_ail1_list. This way
we can, in a later patch, combine transaction ail1 and ail2 lists.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, when blocks were freed, it called gfs2_meta_wipe to
take the metadata out of the pending journal blocks. It did this mostly
by calling another function called gfs2_remove_from_journal. This is
shortsighted because it does not do anything with jdata blocks which
may also be in the journal.
This patch expands the function so that it wipes out jdata blocks from
the journal as well, and it wipes it from the ail1 list if it hasn't
been written back yet. Since it now processes jdata blocks as well,
the function has been renamed from gfs2_meta_wipe to gfs2_journal_wipe.
New function gfs2_ail1_wipe wants a static view of the ail list, so it
locks the sd_ail_lock when removing items. To accomplish this, function
gfs2_remove_from_journal no longer locks the sd_ail_lock, and it's now
the caller's responsibility to do so.
I was going to make sd_ail_lock locking conditional, but the practice is
generally frowned upon. For details, see: https://lwn.net/Articles/109066/
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
This patch adds some code to enhance the log_blocks trace point. It
reports the number of free log blocks. This makes the trace point much
more useful, especially for debugging performance problems when we can
tell when the journal gets full and needs to wait for flushes, etc.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Function gfs2_write_revokes was incrementing and decrementing the number
of log blocks free, but there was never a log_blocks trace point for it.
Thus, the free blocks from a log_blocks trace would jump around
mysteriously.
This patch adds the missing trace points so the trace makes more sense.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Since the function is only used for writing jdata pages, this patch
simply renames function gfs2_write_full_page to a more appropriate
name: gfs2_write_jdata_page. This makes the code easier to understand.
The function was only called in one place, which passed in a pointer to
function gfs2_get_block_noalloc. The function doesn't need to be
passed in. Therefore, this also eliminates the unnecessary parameter
to increase efficiency.
I also took the liberty of cleaning up the function comments.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
In gfs2_check_sb(), no validation checks are performed with regards to
the size of the superblock.
syzkaller detected a slab-out-of-bounds bug that was primarily caused
because the block size for a superblock was set to zero.
A valid size for a superblock is a power of 2 between 512 and PAGE_SIZE.
Performing validation checks and ensuring that the size of the superblock
is valid fixes this bug.
Reported-by: syzbot+af90d47a37376844e731@syzkaller.appspotmail.com
Tested-by: syzbot+af90d47a37376844e731@syzkaller.appspotmail.com
Suggested-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com>
[Minor code reordering.]
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
syzkaller found the following splat with CONFIG_DEBUG_KOBJECT_RELEASE=y:
Read of size 1 at addr ffff000028e896b8 by task kworker/1:2/228
CPU: 1 PID: 228 Comm: kworker/1:2 Tainted: G S 5.9.0-rc8+ #101
Hardware name: linux,dummy-virt (DT)
Workqueue: events kobject_delayed_cleanup
Call trace:
dump_backtrace+0x0/0x4d8
show_stack+0x34/0x48
dump_stack+0x174/0x1f8
print_address_description.constprop.0+0x5c/0x550
kasan_report+0x13c/0x1c0
__asan_report_load1_noabort+0x34/0x60
memcmp+0xd0/0xd8
gfs2_uevent+0xc4/0x188
kobject_uevent_env+0x54c/0x1240
kobject_uevent+0x2c/0x40
__kobject_del+0x190/0x1d8
kobject_delayed_cleanup+0x2bc/0x3b8
process_one_work+0x96c/0x18c0
worker_thread+0x3f0/0xc30
kthread+0x390/0x498
ret_from_fork+0x10/0x18
Allocated by task 1110:
kasan_save_stack+0x28/0x58
__kasan_kmalloc.isra.0+0xc8/0xe8
kasan_kmalloc+0x10/0x20
kmem_cache_alloc_trace+0x1d8/0x2f0
alloc_super+0x64/0x8c0
sget_fc+0x110/0x620
get_tree_bdev+0x190/0x648
gfs2_get_tree+0x50/0x228
vfs_get_tree+0x84/0x2e8
path_mount+0x1134/0x1da8
do_mount+0x124/0x138
__arm64_sys_mount+0x164/0x238
el0_svc_common.constprop.0+0x15c/0x598
do_el0_svc+0x60/0x150
el0_svc+0x34/0xb0
el0_sync_handler+0xc8/0x5b4
el0_sync+0x15c/0x180
Freed by task 228:
kasan_save_stack+0x28/0x58
kasan_set_track+0x28/0x40
kasan_set_free_info+0x24/0x48
__kasan_slab_free+0x118/0x190
kasan_slab_free+0x14/0x20
slab_free_freelist_hook+0x6c/0x210
kfree+0x13c/0x460
Use the same pattern as f2fs + ext4 where the kobject destruction must
complete before allowing the FS itself to be freed. This means that we
need an explicit free_sbd in the callers.
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Jamie Iles <jamie@nuviainc.com>
[Also go to fail_free when init_names fails.]
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
When an rindex entry is found to be corrupt, compute_bitstructs() calls
gfs2_consist_rgrpd() which calls gfs2_rgrp_dump() like this:
gfs2_rgrp_dump(NULL, rgd->rd_gl, fs_id_buf);
gfs2_rgrp_dump then dereferences the gl without checking it and we get
BUG: KASAN: null-ptr-deref in gfs2_rgrp_dump+0x28/0x280
because there's no rgrp glock involved while reading the rindex on mount.
Fix this by changing gfs2_rgrp_dump to take an rgrp argument.
Reported-by: syzbot+43fa87986bdd31df9de6@syzkaller.appspotmail.com
Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Switch to using the iomap readpage and writepage helpers for all I/O in
the ordered and writeback modes, and thus eliminate using buffer_heads
for I/O in these cases. The journaled data mode is left untouched.
(Andreas Gruenbacher: In gfs2_unstuffer_page, switch from mark_buffer_dirty
to set_page_dirty instead of accidentally leaving the page / buffer clean.)
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, we were not calling truncate_inode_pages_final for the
address space for glocks, which left the possibility of a leak. We now
take care of the problem instead of complaining, and we do it during
glock tear-down..
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Now that we've factored out the deleted and undeleted dinode cases
in gfs2_evict_inode, we can greatly simplify the logic. Now the
function is easy to read and understand.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Now that we've factored out the delete-dinode case to simplify
gfs2_evict_inode, we take it a step further and factor out the other
case: where we don't delete the inode.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
This patch further simplifies function gfs2_evict_inode() by adding a
new function evict_should_delete. The function may also lock the inode
glock.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Function gfs2_evict_inode is way too big, complex and unreadable. This
is a baby step toward breaking it apart to be more readable. It factors
out the portion that deletes the online bits for a dinode that is
unlinked and needs to be deleted. A future patch will factor out more.
(If I factor out too much, the patch itself becomes unreadable).
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Function gfs2_evict_inode is too big and unreadable. This patch is just
a baby step toward improving that. This first step just renames variable
error to ret. This will help make future patches more readable.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Use DEFINE_SEQ_ATTRIBUTE macro to simplify the code.
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Commit ca399c96e9 changes gfs2_log_flush to not withdraw the
filesystem while holding the log flush lock, but it fails to check if
the filesystem needs to be withdrawn once the log flush lock has been
released. Likewise, commit f05b86db31 depends on gfs2_log_flush to
trigger for delayed withdraws. Add that and clean up the code flow
somewhat.
In gfs2_put_super, add a check for delayed withdraws that have been
missed to prevent these kinds of bugs in the future.
Fixes: ca399c96e9 ("gfs2: flesh out delayed withdraw for gfs2_log_flush")
Fixes: f05b86db31 ("gfs2: Prepare to withdraw as soon as an IO error occurs in log write")
Cc: stable@vger.kernel.org # v5.7+: 462582b99b: gfs2: add some much needed cleanup for log flushes that fail
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
-----BEGIN PGP SIGNATURE-----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=Wou+
-----END PGP SIGNATURE-----
Merge tag 'gfs2-v5.9-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 fix from Andreas Gruenbacher:
"Fix a memory leak on filesystem withdraw.
We didn't detect this bug because we have slab merging on by default
(CONFIG_SLAB_MERGE_DEFAULT). Adding 'slub_nomerge' to the kernel
command line exposed the problem"
* tag 'gfs2-v5.9-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: add some much needed cleanup for log flushes that fail
When a log flush fails due to io errors, it signals the failure but does
not clean up after itself very well. This is because buffers are added to
the transaction tr_buf and tr_databuf queue, but the io error causes
gfs2_log_flush to bypass the "after_commit" functions responsible for
dequeueing the bd elements. If the bd elements are added to the ail list
before the error, function ail_drain takes care of dequeueing them.
But if they haven't gotten that far, the elements are forgotten and
make the transactions unable to be freed.
This patch introduces new function trans_drain which drains the bd
elements from the transaction so they can be freed properly.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
- Make sure transactions won't be started recursively in gfs2_block_zero_range.
(Bug introduced in 5.4 when switching to iomap_zero_range.)
- Fix a glock holder refcount leak introduced in the iopen glock locking
scheme rework merged in 5.8.
- A few other small improvements (debugging, stack usage, comment fixes).
-----BEGIN PGP SIGNATURE-----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=+Nig
-----END PGP SIGNATURE-----
Merge tag 'gfs2-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 updates from Andreas Gruenbacher:
- Make sure transactions won't be started recursively in
gfs2_block_zero_range (bug introduced in 5.4 when switching to
iomap_zero_range)
- Fix a glock holder refcount leak introduced in the iopen glock
locking scheme rework merged in 5.8.
- A few other small improvements (debugging, stack usage, comment
fixes).
* tag 'gfs2-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: When gfs2_dirty_inode gets a glock error, dump the glock
gfs2: Never call gfs2_block_zero_range with an open transaction
gfs2: print details on transactions that aren't properly ended
gfs2: Fix inaccurate comment
fs: Fix typo in comment
gfs2: Fix refcount leak in gfs2_glock_poke
gfs2: Pass glock holder to gfs2_file_direct_{read,write}
gfs2: Add some flags missing from glock output
Before this patch, if function gfs2_dirty_inode got an error when
trying to lock the inode glock, it complained, but it didn't say
what glock or inode had the problem.
In this case, it almost always means that dinode_in found an error
with the dinode in the file system. So it makes sense to dump the
glock, which tells us the location of the dinode in the file system.
That will allow us to analyze the corruption from the metadata.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, some functions started transactions then they called
gfs2_block_zero_range. However, gfs2_block_zero_range, like writes, can
start transactions, which results in a recursive transaction error.
For example:
do_shrink
trunc_start
gfs2_trans_begin <------------------------------------------------
gfs2_block_zero_range
iomap_zero_range(inode, from, length, NULL, &gfs2_iomap_ops);
iomap_apply ... iomap_zero_range_actor
iomap_begin
gfs2_iomap_begin
gfs2_iomap_begin_write
actor (iomap_zero_range_actor)
iomap_zero
iomap_write_begin
gfs2_iomap_page_prepare
gfs2_trans_begin <------------------------
This patch reorders the callers of gfs2_block_zero_range so that they
only start their transactions after the call. It also adds a BUG_ON to
ensure this doesn't happen again.
Fixes: 2257e468a6 ("gfs2: implement gfs2_block_zero_range using iomap_zero_range")
Cc: stable@vger.kernel.org # v5.5+
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
If function gfs2_trans_begin is called with another transaction active
it BUGs out, but it doesn't give any details about the duplicate.
This patch moves function gfs2_print_trans and calls it when this
situation arises for better debugging.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
The comment regarding journal flush thresholds is wrong. This patch fixes it.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
- Make sure we call ->iomap_end with a failure code if ->iomap_begin
failed in any way; some filesystems need to try to undo things.
- Don't invalidate the page cache during direct reads since we already
sync'd the cache with disk.
- Make direct writes fall back to the page cache if the pre-write
cache invalidation fails. This avoids a cache coherency problem.
- Fix some idiotic virus scanner warning bs in the previous tag.
-----BEGIN PGP SIGNATURE-----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=rjsZ
-----END PGP SIGNATURE-----
Merge tag 'iomap-5.9-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull iomap updates from Darrick Wong:
"The most notable changes are:
- iomap no longer invalidates the page cache when performing a direct
read, since doing so is unnecessary and the old directio code
doesn't do that either.
- iomap embraced the use of returning ENOTBLK from a direct write to
trigger falling back to a buffered write since ext4 already did
this and btrfs wants it for their port.
- iomap falls back to buffered writes if we're doing a direct write
and the page cache invalidation after the flush fails; this was
necessary to handle a corner case in the btrfs port.
- Remove email virus scanner detritus that was accidentally included
in yesterday's pull request. Clearly I need(ed) to update my git
branch checker scripts. :("
* tag 'iomap-5.9-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
iomap: fall back to buffered writes for invalidation failures
xfs: use ENOTBLK for direct I/O to buffered I/O fallback
iomap: Only invalidate page cache pages on direct IO writes
iomap: Make sure iomap_end is called after iomap_begin
