Exynos DRM reported that all planes for all supported sub-devices supports
only three pixel formats: XRGB24, ARGB24 and NV12. This patch lets each
Exynos DRM sub-drivers to provide the list of supported pixel formats
and registers this list to DRM core.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The current code was ignoring the end of update for all overlay planes,
caring only for the primary plane update in case of pageflip.
This change adds a change to start to check for pending updates for all
planes through exynos_plane->pending_fb. At the start of plane update the
pending_fb is set with the fb to be shown on the screen. Then only when to
fb is already presented in the screen we set pending_fb to NULL to
signal that the update was finished.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
fixup! drm/exynos: check for pending fb before finish update
Rename crtc_{widht,height} to crtc_{w,h} and src_{width,height} to
src_{w,h} to make it similar to the atomic state names.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
For some fields the use of struct exynos_drm_plane filled with data from
the plane state just creates a source of duplicated information and
overhead. Here we change the crtc drivers to access the plane state
directly simplifying the code by not relying on a exynos internal struct.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
We already have the plane pointer in before calling .update_plane() or
disable_plane() so pass it directly to those calls avoiding a new
conversion from zpos to struct exynos_drm_plane.
v2: don't remove check for suspended in FIMD (comment by Joonyoung)
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Get rid of legacy DRM vblank function that are less clear to use.
The new ones basically requires only the crtc as parameters.
It also clean ups exynos_drm_crtc_finish_pageflip() parameters as a
consequence.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Already drm_iommu_attach_device checks whether support iommu internally.
It should clear channels always regardless iommu support. We didn't know
because we can detect the problem when iommu is enabled, so we don't
have to use drm_iommu_attach_device_if_possible and then we can remove
drm_iommu_attach_device_if_possible and clear_channels function pointer.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Driver uses only VSYNC interrupts, so we need to cache VSYNC bit state only.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The driver uses bool protected by mutex to track power state.
The patch replaces this combo with single bit and atomic bitops.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Already drm_iommu_attach_device and drm_iommu_detach_device check
whether support iommu internally, so we don't have to call
is_drm_iommu_supported before call them.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
INT_EN cache field was updated only by mixer_enable_vblank.
The patch adds update also by mixer_disable_vblank function.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The driver used incorrect flags to clear interrupt status.
The patch fixes it.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Every CRTC drivers in Exynos DRM implements the code which checks
whether IOMMU is supported or not, and if supported enable it.
Making new helper for it generalize each CRTC drivers.
Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
With atomic modesetting all the control for CRTC, Planes, Encoders and
Connectors should come from DRM core, so the driver is not allowed to
enable or disable planes from inside the crtc_enable()/disable() call.
But it needs to disable planes with crtc_disable in exynos driver
internally. Because crtc is disabled before plane is disabled, it means
plane_disable just returns without any register changes, then we cannot
be sure setting register to disable plane when crtc is disable.
This patch removes this chainned calls to enable plane from exynos hw
drivers code letting only DRM core touch planes except to disable plane.
Also it leads eliminable enabled and resume of struct exynos_drm_plane.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The reason waiting vblank is to be power gated and disabled clocks after
dma operation is completed. The dma operation is stopped already before
be power gated and clocks are disabled when mixer is disabled by commit
381be025ac1a6("drm/exynos: stop mixer before gating clocks during
poweroff"). Don't need to wait vblank anymore.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
In case there are multiple pipelines and deferred probe occurs, only components
of the first pipeline were bound. As a result only one pipeline was available.
The main cause of this issue was dynamic generation of component match table -
every component driver during probe registered itself on helper list, if there
was at least one pipeline present on this list component match table were
created without deferred components.
This patch removes this helper list, instead it creates match table from
existing devices requiring exynos_drm KMS drivers. This way match table do not
depend on probe/deferral order and contains all KMS components.
As a side effect patch makes the code cleaner and significantly smaller.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
To follow more closely the new atomic API we split the dpms()
helper into the enable() and disable() helper to get exactly the
same semantics.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The index for the hardware layer is always >=0. Previous
code that also used -1 as special index is now gone.
Also apply this to 'ch_enabled' (decon/fimd), since the
variable is on the same line (and is again always unsigned).
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The Exynos DRM code does not modify the ops provided by CRTC driver in
exynos_drm_crtc_create() call.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The platform_device_id is not modified by the driver and core uses it as
const.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Move the defines for the pixelformats that the mixer supports out
of mixer_graph_buffer() to the top of the source.
Then select the mixer pixelformat (pf) in mixer_graph_buffer() based on
the plane's pf (and not bpp).
Also add handling of RGB565 and XRGB1555 to the switch statement and
exit early if the plane has an unsupported pf.
Partially based on 'drm/exynos: enable/disable blend based on pixel
format' by Gustavo Padovan <gustavo.padovan@collabora.co.uk>.
v2: Use the shorter MXR_FORMAT as prefix.
v3: Re-add ARGB8888 because of compatibility reasons
(suggested by Joonyoung Shim).
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Acked-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
All the necessary code is already there, just need to
handle the format in the switch statement.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Acked-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The video processor (VP) supports four formats: NV12, NV21 and its
tiled variants. All these formats are bi-planar, so the buffer
count in vp_video_buffer() is always 2.
Also properly exit if we're called with an invalid (non-VP) pixelformat.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Acked-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Calculation ratio from exynos_drm plane codes, then each hw drivers can
use it without extra operation. Also this fixes width and height of
source used for actual crtc shown via screen.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
It's more reasonable to use src_x and src_y to represent source as
counterpart of destination(crtc). Already we are using src_width and
src_height for width and height of source.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
While the VP (video processor) supports arbitrary scaling
of its input, the mixer just supports a simple 2x (line
doubling) scaling. Expose this functionality and exit
early when an unsupported scaling configuration is
encountered.
This was tested with modetest's DRM plane test (from
the libdrm test suite) on an Odroid-X2 (Exynos4412).
v2: Put if- and return-statement on different lines.
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Acked-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Usually userspace don't want to have two overlay planes on the same zpos
so this change assign a different zpos for each plane. Before this change
a zpos of value zero was created for all planes so the userspace had to
set up the zpos of every plane it wanted to use.
Also all places that were storing zpos positions are now unsigned int.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
struct {fimd,mixer,vidi}_win_data was just keeping the same data
as struct exynos_drm_plane thus get ride of it and use exynos_drm_plane
directly.
It changes how planes are created and remove .win_mode_set() callback
that was only filling all *_win_data structs.
v2: check for return of exynos_plane_init()
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
When performing a modeset, use the framebuffer pitch value to set FIMD
IMG_SIZE and Mixer SPAN registers. These are both defined as pitch - the
distance between contiguous lines (bytes for FIMD, pixels for mixer).
Fixes display on Snow (1366x768).
Signed-off-by: Daniel Stone <daniels@collabora.com>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Summary:
- Add code cleanups and bug fixups.
- Add a new display controller dirver, DECON which is a new display
controller of Exynos7 SoC. This device is much different from
FIMD of Exynos4 and Exynos4 SoC series.
* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
drm/exynos: Add DECON driver
drm/exynos: fix NULL pointer reference
drm/exynos: remove exynos_plane_dpms
drm/exynos: remove mode property of exynos crtc
drm/exynos: Remove exynos_plane_dpms() call with no effect
drm/exynos: fix DMA_ATTR_NO_KERNEL_MAPPING usage
drm/exynos: hdmi: replace fb size with mode size from win commit
drm/exynos: fix no hdmi output
drm/exynos: use driver internal struct
drm/exynos: fix wrong pipe calculation for crtc
drm/exynos: remove to use unnecessary MODULE_xxx macro
drm/exynos: remove DRM_EXYNOS_DMABUF config
drm/exynos: IOMMU support should not be selectable by user
drm/exynos: add support for 'hdmi' clock
Flushing out my drm-misc queue with a few oddball things all over.
* tag 'topic/drm-misc-2015-02-06' of git://anongit.freedesktop.org/drm-intel:
drm: Use static attribute groups for managing connector sysfs entries
drm: remove DRM_FORMAT_NV12MT
drm/modes: Print the mode status in human readable form
drm/irq: Don't disable vblank interrupts when already disabled
For default graphic window, mixer_win_commit() sets display size
register as fb size. Calling setplane with smaller fb size than
mode size to default window causes distorted display result. So
this patch replaces fb size with mode size for display size from
the mixer_win_commit().
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Acked-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The hdmi outputs black screen only even though under the hood Xorg and
framebuffer console are fine : devices found and initialized, but
not a pixel out.
Commit 93bca243ec ("drm/exynos: remove struct exynos_drm_manager")
changed the call order of mixer_initialize with regards to
exynos_drm_crtc_create.
This changes breaks hdmi out on Odroid U2 (linux-next with added
Marek Szyprowski v4 hdmi patchset from linux-samsung-soc ML).
Restore the previous call ordering get hdmi to ouput proper pixels:
ie call mixer_initialize first then exynos_drm_crtc_create.
Fixes: 93bca243ec ("drm/exynos: remove struct exynos_drm_manager")
Signed-off-by: Alban Browaeys <prahal@yahoo.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Use driver internal struct as argument instead of struct exynos_drm_crtc
except functions of exynos_drm_crtc_ops and instead of struct
exynos_drm_display except functions of exynos_drm_display_ops.
It can reduce unnecessary variable declaration.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Mixed need to have hdmi clock enabled to properly perform power on/off
sequences, so add handling of this clock directly to the mixer driver.
Dependency between hdmi clock and mixer module has been observed on
Exynos4 based boards.
Suggested-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
So this has been merged originally in
commit 83052d4d5c
Author: Seung-Woo Kim <sw0312.kim@samsung.com>
Date: Thu Dec 15 15:40:55 2011 +0900
drm: Add multi buffer plane pixel formats
which hasn't seen a lot of review really. The problem is that it's not
a real pixel format, but just a different way to lay out NV12 pixels
in macroblocks, i.e. a tiling format.
The new way of doing this is with the soon-to-be-merged fb modifiers.
This was brough up in some long irc discussion around the entire
topic, as an example of where things have gone wrong. Luckily we can
correct the mistake:
- The kms side support for NV12MT is all dead code because
format_check in drm_crtc.c never accepted NV12MT.
- The gem side for the gsc support doesn't look better: The code
forgets to set the pixel format and makes a big mess with the tiling
mode bits, inadvertedly setting them all.
Conclusion: This never really worked (at least not in upstream) and
hence we can safely correct our mistake here.
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Rob Clark <robclark@freedesktop.org>
Cc: Daniel Stone <daniel@fooishbar.org>
Cc: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Rob Clark <robclark@freedesktop.org>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Acked-by: Joonyoung Shim <jy0922.shim@samsung.com>
Acked-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
exynos_drm_manager was just a redundant struct to represent the crtc as
well. In this commit we merge exynos_drm_manager into exynos_drm_crtc to
remove an unnecessary level of indirection easing the understand of the
flow on exynos.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
manager-drm_dev is only accessed by exynos_drm_crtc_create() so this patch
pass drm_dev as argument on exynos_drm_crtc_create() and remove it from
struct exynos_drm_manager.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
'type' is now part of the struct exynos_drm_crtc. This is just another
step in the struct exynos_drm_manager removal.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
It is not longer used. This is part of the process of removing
struct exynos_drm_manager entirely.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Get the pipe value from a parameter instead of getting it from
manager->pipe. We are removing manager->pipe.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
struct exynos_drm_overlay has no practical advantage nor serves as
important piece of the exynos API design. The only place it was used
was inside the struct exynos_plane which was just causing a extra
access overhead. Users had to access the overlay first and just then
get the plane information it contains.
This patch merges struct exynos_drm_overlay into struct exynos_plane.
It also renames struct exynos_plane to struct exynos_drm_plane.
The rational is to cut one step to access plane information.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
In booting, we can see a below message.
[ 3.241728] exynos-mixer 14450000.mixer: Unbalanced pm_runtime_enable!
Already pm_runtime_enable is called by probe function. Remove
pm_runtime_enable/disable from mixer_bind and mixer_unbind.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The patch replaces accesses to manager->ctx pointer by container_of
construct. It will allow to remove ctx field in the future.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
