Commit Graph

5569 Commits

Author SHA1 Message Date
Greg Kroah-Hartman
b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Luc Van Oostenryck
3b42c17a7e s390: pass endianness info to sparse
s390 is big-endian only but sparse assumes the same endianness
as the building machine.
This is problematic for code which expect __BYTE_ORDER__ being
correctly predefined by the compiler which sparse can then
pre-process differently from what gcc would, depending on the
building machine endianness.

Fix this by letting sparse know about the architecture endianness.

Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-11-02 07:52:25 +01:00
Martin Schwidefsky
b82a5e4ea8 s390/decompressor: remove informational messages
The decompressor for bzImage prints two informational messages which are
not really helpful. The decompression step is fast and if something bad
happens an error message will be printed. Remove the noise.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-10-26 16:44:59 +02:00
Hendrik Brueckner
3593eb944c s390/cpum_cf: add hardware counter support for IBM z14
Add the hardware counters that are available with z14.  With z14,
the number of problem-state counters is reduced.  The initialization
is updated respectively.

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-10-26 08:23:14 +02:00
Mark Rutland
6aa7de0591 locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns to READ_ONCE()/WRITE_ONCE()
Please do not apply this to mainline directly, instead please re-run the
coccinelle script shown below and apply its output.

For several reasons, it is desirable to use {READ,WRITE}_ONCE() in
preference to ACCESS_ONCE(), and new code is expected to use one of the
former. So far, there's been no reason to change most existing uses of
ACCESS_ONCE(), as these aren't harmful, and changing them results in
churn.

However, for some features, the read/write distinction is critical to
correct operation. To distinguish these cases, separate read/write
accessors must be used. This patch migrates (most) remaining
ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following
coccinelle script:

----
// Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and
// WRITE_ONCE()

// $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch

virtual patch

@ depends on patch @
expression E1, E2;
@@

- ACCESS_ONCE(E1) = E2
+ WRITE_ONCE(E1, E2)

@ depends on patch @
expression E;
@@

- ACCESS_ONCE(E)
+ READ_ONCE(E)
----

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: davem@davemloft.net
Cc: linux-arch@vger.kernel.org
Cc: mpe@ellerman.id.au
Cc: shuah@kernel.org
Cc: snitzer@redhat.com
Cc: thor.thayer@linux.intel.com
Cc: tj@kernel.org
Cc: viro@zeniv.linux.org.uk
Cc: will.deacon@arm.com
Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-25 11:01:08 +02:00
Martin Schwidefsky
0a5e2ec264 s390/kvm: fix detection of guest machine checks
The new detection code for guest machine checks added a check based
on %r11 to .Lcleanup_sie to distinguish between normal asynchronous
interrupts and machine checks. But the funtion is called from the
program check handler as well with an undefined value in %r11.

The effect is that all program exceptions pointing to the SIE instruction
will set the CIF_MCCK_GUEST bit. The bit stays set for the CPU until the
 next machine check comes in which will incorrectly be interpreted as a
guest machine check.

The simplest fix is to stop using .Lcleanup_sie in the program check
handler and duplicate a few instructions.

Fixes: c929500d7a ("s390/nmi: s390: New low level handling for machine check happening in guest")
Cc: <stable@vger.kernel.org> # v4.13+
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-10-25 07:59:30 +02:00
Ingo Molnar
9babb091e0 Linux 4.14-rc6
-----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJZ7clWAAoJEHm+PkMAQRiG07AH/iKcej+AsurISHx6i/LUEDC1
 a9wo5HAR5kEj+ohdE3JSkD9BHLcyhcCXaqIk9yOrwi9xv1DrPv8U/nGkKzZJzFi2
 mGWK09Zgi+vgSpA+YSErgl05IVGtgaryQQPqQdawpyRpqTUwP0+2pLnKEnJe0f05
 fpv+S4bDKUCuE8GcVNjF9gxXDg8j60fFa+oAcn7QPS6dCun/H6TbDRue5oeky0Y+
 50ZYjjioy9S9DIm2VF7pktMCP/mK/fgb+Q+4Up09VJGHGhq+891SRJ27yDulxo47
 /gq22SRIGBX2PGNllSwhYslgaCRRlYTMBYOIWrBreanA4NpGD662dp+GgWhD154=
 =TAMw
 -----END PGP SIGNATURE-----

Merge tag 'v4.14-rc6' into locking/core, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-24 13:17:20 +02:00
Martin Schwidefsky
3037a52f98 s390/nmi: do register validation as early as possible
The validation of the CPU registers in the machine check handler is
currently split into two parts. The first part is done at the start
of the low level mcck_int_handler function, this includes the CPU
timer register and the general purpose registers.
The second part is done a bit later in s390_do_machine_check for all
the other registers, including the control registers, floating pointer
control, vector or floating pointer registers, the access registers,
the guarded storage registers, the TOD programmable registers and the
clock comparator.

This is working fine to far but in theory a future extensions could
cause the C code to use registers that are not validated yet. A better
approach is to validate all CPU registers in "safe" assembler code
before any C function is called.

Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-10-19 17:07:40 +02:00
Martin Schwidefsky
6c81511ca1 s390/nmi: allocation of the extended save area
The machine check extended save area is needed to store the vector
registers and the guarded storage control block when a CPU is
interrupted by a machine check.

Move the slab cache allocation of the full save area to nmi.c,
for early boot use a static __initdata block.

Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-10-19 17:07:39 +02:00
Martin Schwidefsky
cc65450c83 s390/ctl_reg: move control register definitions to ctl_reg.h
The nmi.h header has some constant defines for control register bits.
These definitions should really be located in ctl_reg.h. Move and
rename the defines.

Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-10-19 17:07:37 +02:00
Martin Schwidefsky
ad3bc0ac1d s390/ctl_reg: use decoding unions in update_cr_regs
Add a decoding union for the bits in control registers 2 and use
'union ctlreg0' and 'union ctlreg2' in update_cr_regs to improve
readability.

Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-10-19 17:07:36 +02:00
Martin Schwidefsky
00a8f886db s390/nmi: use smp_emergency_stop instead of smp_send_stop
The smp_send_stop() function can be called from s390_handle_damage
while DAT is off. This happens if a machine check indicates that
kernel gprs or control registers can not be restored. The function
smp_send_stop reenables DAT via __load_psw_mask. That should work
for the case of lost kernel gprs and the system will do the expected
stop of all CPUs. But if control registers are lost, in particular
CR13 with the home space ASCE, interesting secondary crashes may
occur.

Make smp_emergency_stop callable from nmi.c and remove the cpumask
argument. Replace the smp_send_stop call with smp_emergency_stop in
the s390_handle_damage function.

In addition add notrace and NOKPROBE_SYMBOL annotations for all
functions required for the emergency shutdown.

Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-10-19 17:07:32 +02:00
Christoph Hellwig
c9eb6172c3 dma-mapping: turn dma_cache_sync into a dma_map_ops method
After we removed all the dead wood it turns out only two architectures
actually implement dma_cache_sync as a real op: mips and parisc.  Add
a cache_sync method to struct dma_map_ops and implement it for the
mips defualt DMA ops, and the parisc pa11 ops.

Note that arm, arc and openrisc support DMA_ATTR_NON_CONSISTENT, but
never provided a functional dma_cache_sync implementations, which
seems somewhat odd.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
2017-10-19 16:37:49 +02:00
Martin Schwidefsky
608796ffe1 s390/vdso: move boot_vdso_data to vdso.c
The boot_vdso_data variable is related to the vdso code, the magic of the
initial vdso area for the early boot and the replacement of it in vdso_init
should all be put into vdso.c.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-10-18 14:11:36 +02:00
Vasily Gorbik
f554be42fd s390/spinlock: use cpu alternatives to enable niai instruction
Enable niai instruction in the spinlock code at run-time for machines
on which facility 49 is available (zEC12 and newer).

Signed-off-by: Vasily Gorbik <gor@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-10-18 14:11:33 +02:00
Vasily Gorbik
686140a1a9 s390: introduce CPU alternatives
Implement CPU alternatives, which allows to optionally patch newer
instructions at runtime, based on CPU facilities availability.

A new kernel boot parameter "noaltinstr" disables patching.

Current implementation is derived from x86 alternatives. Although
ideal instructions padding (when altinstr is longer then oldinstr)
is added at compile time, and no oldinstr nops optimization has to be
done at runtime. Also couple of compile time sanity checks are done:
1. oldinstr and altinstr must be <= 254 bytes long,
2. oldinstr and altinstr must not have an odd length.

alternative(oldinstr, altinstr, facility);
alternative_2(oldinstr, altinstr1, facility1, altinstr2, facility2);

Both compile time and runtime padding consists of either 6/4/2 bytes nop
or a jump (brcl) + 2 bytes nop filler if padding is longer then 6 bytes.

.altinstructions and .altinstr_replacement sections are part of
__init_begin : __init_end region and are freed after initialization.

Signed-off-by: Vasily Gorbik <gor@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-10-18 14:11:29 +02:00
Sebastian Ott
0dcd91a9e6 s390/debug: only write data once
debug_event_common memsets the active debug entry with zeros to
prevent stale data leakage. This is overwritten with the actual
debug data in the next step. Only write zeros to that part of the
debug entry that's not used by new debug data.

Micro benchmarks show a 2-10% reduction of cpu cycles with this
approach.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Acked-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-10-18 14:11:23 +02:00
Sebastian Ott
94158e544f s390/debug: improve debug_event
debug_event currently truncates the data if used with a size larger than
the buf_size of the debug feature. For lots of callers of this function,
wrappers have been implemented that loop until all data is handled.

Move that functionality into debug_event_common and get rid of the wrappers.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Acked-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-10-18 14:11:19 +02:00
Philipp Rudo
7c3eaaa391 s390/kexec: Fix checksum validation return code for kdump
Before kexec boots to a crash kernel it checks whether the image in memory
changed after load. This is done by the function kdump_csum_valid, which
returns true, i.e. an int != 0, on success and 0 otherwise. In other words
when kdump_csum_valid returns an error code it means that the validation
succeeded. This is not only counterintuitive but also produces the wrong
result if the kernel was build without CONFIG_CRASH_DUMP. Fix this by
making kdump_csum_valid return a bool.

Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com>
Acked-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-10-18 14:11:16 +02:00
Martin Schwidefsky
fe3af62553 s390: update defconfig
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-10-16 08:19:28 +02:00
Heiko Carstens
496da0d706 s390/debug: adjust coding style
The debug feature code hasn't been touched in ages and the code also
looks like this. Therefore clean up the code so it looks a bit more
like current coding style.

There is no functional change - actually I made also sure that the
generated code with performance_defconfig is identical.
A diff of old vs new with "objdump -d" is empty.

The code is still not checkpatch clean, but that was not the goal.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-10-16 08:19:26 +02:00
Dimitri John Ledkov
0015a978a2 s390: fix zfcpdump-config
zipl from s390-tools generates root=/dev/ram0 kernel cmdline for
zfcpdump, thus BLK_DEV_RAM is required.

zfcpdump initrd mounts DEBUG_FS, thus is also required.

Bug-Ubuntu: https://launchpad.net/bugs/1722735
Bug-Ubuntu: https://launchpad.net/bugs/1719290

Signed-off-by: Dimitri John Ledkov <xnox@ubuntu.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-10-16 08:19:01 +02:00
Christian Borntraeger
b7662eef14 s390/cputime: fix guest/irq/softirq times after CPU hotplug
On CPU hotplug some cpu stats contain bogus values:

$ cat /proc/stat
cpu 0 0 49 1280 0 0 0 3 0 0
cpu0 0 0 49 618 0 0 0 3 0 0
cpu1 0 0 0 662 0 0 0 0 0 0
[...]
$ echo 0 > /sys/devices/system/cpu/cpu1/online
$ echo 1 > /sys/devices/system/cpu/cpu1/online
$ cat /proc/stat
cpu 0 0 49 3200 0 450359962737 450359962737 3 0 0
cpu0 0 0 49 1956 0 0 0 3 0 0
cpu1 0 0 0 1244 0 450359962737 450359962737 0 0 0
[...]

pcpu_attach_task() needs the same assignments as vtime_task_switch.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Fixes: b7394a5f4c ("sched/cputime, s390: Implement delayed accounting of system time")
Cc: stable@vger.kernel.org # 4.11+
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-10-16 08:19:01 +02:00
Heiko Carstens
df8bbd0c98 s390/kprobes: remove KPROBE_SWAP_INST state
For an unknown reason the s390 kprobes instruction replacement
function modifies the kprobe_status of the current CPU to
KPROBE_SWAP_INST. This was supposed to catch traps that happened
during instruction patching. Such a fault is not supposed to happen,
and silently discarding such a fault is certainly also not what we
want. In fact s390 is the only architecture which has this odd piece
of code.

Just remove this and behave like all other architectures. This was
pointed out by Jens Remus.

Reported-by: Jens Remus <jremus@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-10-12 07:16:50 +02:00
Will Deacon
a4c1887d4c locking/arch: Remove dummy arch_{read,spin,write}_lock_flags() implementations
The arch_{read,spin,write}_lock_flags() macros are simply mapped to the
non-flags versions by the majority of architectures, so do this in core
code and remove the dummy implementations. Also remove the implementation
in spinlock_up.h, since all callers of do_raw_spin_lock_flags() call
local_irq_save(flags) anyway.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: paulmck@linux.vnet.ibm.com
Link: http://lkml.kernel.org/r/1507055129-12300-4-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-10 11:50:19 +02:00
Will Deacon
0160fb177d locking/arch: Remove dummy arch_{read,spin,write}_relax() implementations
arch_{read,spin,write}_relax() are defined as cpu_relax() by the core
code, so architectures that can't do better (i.e. most of them) don't
need to bother with the dummy definitions.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: paulmck@linux.vnet.ibm.com
Link: http://lkml.kernel.org/r/1507055129-12300-3-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-10 11:50:18 +02:00
Will Deacon
a8a217c221 locking/core: Remove {read,spin,write}_can_lock()
Outside of the locking code itself, {read,spin,write}_can_lock() have no
users in tree. Apparmor (the last remaining user of write_can_lock()) got
moved over to lockdep by the previous patch.

This patch removes the use of {read,spin,write}_can_lock() from the
BUILD_LOCK_OPS macro, deferring to the trylock operation for testing the
lock status, and subsequently removes the unused macros altogether. They
aren't guaranteed to work in a concurrent environment and can give
incorrect results in the case of qrwlock.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: paulmck@linux.vnet.ibm.com
Link: http://lkml.kernel.org/r/1507055129-12300-2-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-10 11:50:18 +02:00
Kirill Tkhai
a61ba2c8a4 locking/arch, s390: Add __down_read_killable()
Similar to __down_write_killable(), and read killable primitive.

Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: arnd@arndb.de
Cc: avagin@virtuozzo.com
Cc: davem@davemloft.net
Cc: fenghua.yu@intel.com
Cc: gorcunov@virtuozzo.com
Cc: heiko.carstens@de.ibm.com
Cc: hpa@zytor.com
Cc: ink@jurassic.park.msu.ru
Cc: mattst88@gmail.com
Cc: rientjes@google.com
Cc: rth@twiddle.net
Cc: schwidefsky@de.ibm.com
Cc: tony.luck@intel.com
Cc: viro@zeniv.linux.org.uk
Link: http://lkml.kernel.org/r/150670117817.23930.13068785028558453848.stgit@localhost.localdomain
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-10 11:50:15 +02:00
Heiko Carstens
49913f1fd0 s390: cleanup string ops prototypes
Just some trivial changes like removing the extern keyword from the
header file, renaming arguments to match the man pages, and whitespace
removal.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-10-09 11:18:08 +02:00
Heiko Carstens
993fef95b9 s390: optimize memset implementation
Like for the memset16/32/64 variants avoid that subsequent mvc
instructions depend on each other since that might have negative
performance impacts.

This patch is currently hardly relevant since at least gcc 7.1
generates only inline memset code and not a single memset call.
However there is no reason to not provide an optimized version
just in case gcc generates memset calls again, like it did in
the past.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-10-09 11:18:07 +02:00
Heiko Carstens
41879ff65d s390/mm: use memset64 instead of clear_table
Use memset64 instead of the (now) open-coded variant clear_table.
Performance wise there is no difference.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-10-09 11:18:06 +02:00
Heiko Carstens
0b77d6701c s390: implement memset16, memset32 & memset64
Provide fast versions of the new memset variants. E.g. the generic
memset64 is ten times slower than the optimized version if used on a
whole page.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-10-09 11:18:04 +02:00
Martin Schwidefsky
3bdf5679c9 Merge branch 'sthyi' into features
Add the store-hypervisor-information code into features
using a tip branch for parallel merging into the KVM tree.
2017-10-09 11:16:49 +02:00
QingFeng Hao
3d8757b87d s390/sthyi: add s390_sthyi system call
Add a syscall of s390_sthyi to implement STHYI instruction in LPAR
which reuses the implementation for KVM by Janosch Frank -
commit 95ca2cb579 ("KVM: s390: Add sthyi emulation").

STHYI(Store Hypervisor Information) is an emulated z/VM instruction that
provides a guest with basic information about the layers it is running
on. This includes information about the cpu configuration of both the
machine and the lpar, as well as their names, machine model and
machine type. This information enables an application to determine the
maximum capacity of CPs and IFLs available to software.

For the arguments of s390_sthyi, code shall be 0 and flags is reserved for
future use, info is the output argument to store the required hypervisor
info.

Signed-off-by: QingFeng Hao <haoqf@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-10-09 11:15:36 +02:00
QingFeng Hao
9fb6c9b3fe s390/sthyi: add cache to store hypervisor info
STHYI requires extensive locking in the higher hypervisors and is
very computational/memory expensive. Therefore we cache the retrieved
hypervisor info whose valid period is 1s with mutex to allow concurrent
access. rw semaphore can't benefit here due to cache line bounce.

Signed-off-by: QingFeng Hao <haoqf@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-10-09 11:15:35 +02:00
QingFeng Hao
b7c92f1a4e s390/sthyi: reorganize sthyi implementation
As we need to support sthyi instruction on LPAR too, move the common code
to kernel part and kvm related code to intercept.c for better reuse.

Signed-off-by: QingFeng Hao <haoqf@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-10-09 11:15:33 +02:00
Kees Cook
1d27e3e225 timer: Remove expires and data arguments from DEFINE_TIMER
Drop the arguments from the macro and adjust all callers with the
following script:

  perl -pi -e 's/DEFINE_TIMER\((.*), 0, 0\);/DEFINE_TIMER($1);/g;' \
    $(git grep DEFINE_TIMER | cut -d: -f1 | sort -u | grep -v timer.h)

Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # for m68k parts
Acked-by: Guenter Roeck <linux@roeck-us.net> # for watchdog parts
Acked-by: David S. Miller <davem@davemloft.net> # for networking parts
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Kalle Valo <kvalo@codeaurora.org> # for wireless parts
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: linux-mips@linux-mips.org
Cc: Petr Mladek <pmladek@suse.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Kalle Valo <kvalo@qca.qualcomm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: linux1394-devel@lists.sourceforge.net
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: linux-s390@vger.kernel.org
Cc: linux-wireless@vger.kernel.org
Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com>
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Ursula Braun <ubraun@linux.vnet.ibm.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Harish Patil <harish.patil@cavium.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Michael Reed <mdr@sgi.com>
Cc: Manish Chopra <manish.chopra@cavium.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-pm@vger.kernel.org
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Mark Gross <mark.gross@intel.com>
Cc: linux-watchdog@vger.kernel.org
Cc: linux-scsi@vger.kernel.org
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: netdev@vger.kernel.org
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: https://lkml.kernel.org/r/1507159627-127660-11-git-send-email-keescook@chromium.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-10-05 15:01:20 +02:00
Kees Cook
5cd79d6abd timer: Remove users of TIMER_DEFERRED_INITIALIZER
This removes uses of TIMER_DEFERRED_INITIALIZER and chooses a location
to call timer_setup() from before add_timer() or mod_timer() is called.
Adjusts callbacks to use from_timer() as needed.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mips@linux-mips.org
Cc: Petr Mladek <pmladek@suse.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Kalle Valo <kvalo@qca.qualcomm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: linux1394-devel@lists.sourceforge.net
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: linux-s390@vger.kernel.org
Cc: linux-wireless@vger.kernel.org
Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com>
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Ursula Braun <ubraun@linux.vnet.ibm.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Harish Patil <harish.patil@cavium.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Manish Chopra <manish.chopra@cavium.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-pm@vger.kernel.org
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Mark Gross <mark.gross@intel.com>
Cc: linux-watchdog@vger.kernel.org
Cc: linux-scsi@vger.kernel.org
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: Michael Reed <mdr@sgi.com>
Cc: netdev@vger.kernel.org
Cc: Tejun Heo <tj@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: https://lkml.kernel.org/r/1507159627-127660-7-git-send-email-keescook@chromium.org
2017-10-05 15:01:18 +02:00
Heiko Carstens
91a1fad759 s390: use generic rwsem implementation
We never optimized our rwsem inline assemblies to make use of the new
atomic instructions. The generic rwsem implementation implicitly makes
use of the new instructions, since it implements the required rwsem
primitives with atomic operations, which we did optimize.

However even when compiling for old architectures the generic variant
still generates better code. So it's time to simply remove our old
code and switch to the generic implementation.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-10-04 10:30:31 +02:00
Heiko Carstens
e0d281d067 s390/disassembler: add new z14 instructions
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-09-29 15:52:24 +02:00
Heiko Carstens
ea7c360b10 s390/disassembler: add missing z13 instructions
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-09-29 15:52:18 +02:00
Heiko Carstens
630f789e80 s390/disassembler: add sthyi instruction
This instruction came with a z/VM extension and not with a specific
machine generation.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-09-29 15:52:11 +02:00
Heiko Carstens
7e1263b720 s390/disassembler: remove double instructions
Remove a couple of instructions that are listed twice.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-09-29 15:52:06 +02:00
Heiko Carstens
caefea1d3a s390/disassembler: fix LRDFU format
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-09-29 15:52:03 +02:00
Heiko Carstens
5c50538752 s390/disassembler: add missing end marker for e7 table
The e7 opcode table does not have an end marker. Hence when trying to
find an unknown e7 instruction the code will access memory behind the
table until it finds something that matches the opcode, or the kernel
crashes, whatever comes first.

This affects not only the in-kernel disassembler but also uprobes and
kprobes which refuse to set a probe on unknown instructions, and
therefore search the opcode tables to figure out if instructions are
known or not.

Cc: <stable@vger.kernel.org> # v3.18+
Fixes: 3585cb0280 ("s390/disassembler: add vector instructions")
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-09-29 15:51:59 +02:00
Thomas Huth
7fb2b2d512 s390/virtio: remove the old KVM virtio transport
There is no recent user space application available anymore which still
supports this old virtio transport. Additionally, commit 3b2fbb3f06
("virtio/s390: deprecate old transport") introduced a deprecation message
in the driver, and apparently nobody complained so far that it is still
required. So let's simply remove it.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-09-29 15:51:35 +02:00
Julian Wiedmann
f9a5d70cfa s390/ccwgroup: tie a ccwgroup driver to its ccw driver
When grouping devices, the ccwgroup core only checks whether all of the
devices are bound to the same ccw_driver. It has no means of checking
if the requesting ccwgroup driver actually supports this device type.
qeth implements its own device matching in qeth_core_probe_device(),
while ctcm and lcs currently have no sanity-checking at all.

Enable ccwgroup drivers to optionally defer the device type checking to
the ccwgroup core, by specifying their supported ccw_driver.
This allows us drop the device type matching from qeth, and improves
the robustness of ctcm and lcs.

Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Acked-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-09-29 15:51:30 +02:00
Harald Freudenberger
bf7fa03870 s390/crypto: add s390 platform specific aes gcm support.
This patch introduces gcm(aes) support into the aes_s390 kernel module.

Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Signed-off-by: Harald Freudenberger <freude@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-09-29 15:51:25 +02:00
Patrick Steuer
eecd49c462 s390/crypto: add inline assembly for KMA instruction to cpacf.h
Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-09-29 15:51:19 +02:00
Martin Schwidefsky
eb3b7b848f s390/rwlock: introduce rwlock wait queueing
Like the common queued rwlock code the s390 implementation uses the
queued spinlock code on a spinlock_t embedded in the rwlock_t to achieve
the queueing. The encoding of the rwlock_t differs though, the counter
field in the rwlock_t is split into two parts. The upper two bytes hold
the write bit and the write wait counter, the lower two bytes hold the
read counter.

The arch_read_lock operation works exactly like the common qrwlock but
the enqueue operation for a writer follows a diffent logic. After the
failed inline try to get the rwlock in write, the writer first increases
the write wait counter, acquires the wait spin_lock for the queueing,
and then loops until there are no readers and the write bit is zero.
Without the write wait counter a CPU that just released the rwlock
could immediately reacquire the lock in the inline code, bypassing all
outstanding read and write waiters. For s390 this would cause massive
imbalances in favour of writers in case of a contended rwlock.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-09-28 07:29:44 +02:00
Martin Schwidefsky
b96f7d881a s390/spinlock: introduce spinlock wait queueing
The queued spinlock code for s390 follows the principles of the common
code qspinlock implementation but with a few notable differences.

The format of the spinlock_t locking word differs, s390 needs to store
the logical CPU number of the lock holder in the spinlock_t to be able
to use the diagnose 9c directed yield hypervisor call.

The inline code sequences for spin_lock and spin_unlock are nice and
short. The inline portion of a spin_lock now typically looks like this:

	lhi	%r0,0			# 0 indicates an empty lock
	l	%r1,0x3a0		# CPU number + 1 from lowcore
	cs	%r0,%r1,<some_lock>	# lock operation
	jnz	call_wait		# on failure call wait function
locked:
	...
call_wait:
	la	%r2,<some_lock>
	brasl	%r14,arch_spin_lock_wait
	j	locked

A spin_unlock is as simple as before:

	lhi	%r0,0
	sth	%r0,2(%r2)		# unlock operation

After a CPU has queued itself it may not enable interrupts again for the
arch_spin_lock_flags() variant. The arch_spin_lock_wait_flags wait function
is removed.

To improve performance the code implements opportunistic lock stealing.
If the wait function finds a spinlock_t that indicates that the lock is
free but there are queued waiters, the CPU may steal the lock up to three
times without queueing itself. The lock stealing update the steal counter
in the lock word to prevent more than 3 steals. The counter is reset at
the time the CPU next in the queue successfully takes the lock.

While the queued spinlocks improve performance in a system with dedicated
CPUs, in a virtualized environment with continuously overcommitted CPUs
the queued spinlocks can have a negative effect on performance. This
is due to the fact that a queued CPU that is preempted by the hypervisor
will block the queue at some point even without holding the lock. With
the classic spinlock it does not matter if a CPU is preempted that waits
for the lock. Therefore use the queued spinlock code only if the system
runs with dedicated CPUs and fall back to classic spinlocks when running
with shared CPUs.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-09-28 07:29:44 +02:00
Martin Schwidefsky
8153380379 s390/spinlock: use the cpu number +1 as spinlock value
The queued spinlock code will come out simpler if the encoding of
the CPU that holds the spinlock is (cpu+1) instead of (~cpu).

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-09-28 07:29:44 +02:00
Martin Schwidefsky
1887aa07b6 s390/topology: add detection of dedicated vs shared CPUs
The topology information returned by STSI 15.x.x contains a flag
if the CPUs of a topology-list are dedicated or shared. Make this
information available if the machine provides topology information.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-09-28 07:29:43 +02:00
Heiko Carstens
1922099979 s390/cpumf: remove superfluous nr_cpumask_bits check
Paul Burton reported that the nr_cpumask_bits check
within cpumsf_pmu_event_init() is not necessary.

Actually there is already a prior check within
perf_event_alloc(). Therefore remove the check.

Reported-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-09-28 07:29:43 +02:00
Alice Frosi
262832bc5a s390/ptrace: add runtime instrumention register get/set
Add runtime instrumention register get and set which allows to read
and modify the runtime instrumention control block.

Signed-off-by: Alice Frosi <alice@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-09-28 07:29:41 +02:00
Alice Frosi
bb59c2da3f s390/runtime_instrumentation: clean up struct runtime_instr_cb
Update runtime_instr_cb structure to be consistent with the runtime
instrumentation documentation.

Signed-off-by: Alice Frosi <alice@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-09-28 07:29:40 +02:00
Heiko Carstens
79962038df s390: add support for FORTIFY_SOURCE
This is the quite trivial backend for s390 which is required to enable
FORTIFY_SOURCE support.

See commit 6974f0c455 ("include/linux/string.h: add the option of
fortified string.h functions") for more details.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-09-28 07:29:40 +02:00
Heiko Carstens
59a19ea9a0 s390: get rid of exit_thread()
exit_thread() is empty now. Therefore remove it and get rid of a
pointless branch.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-09-28 07:29:40 +02:00
Heiko Carstens
7b83c6297d s390/guarded storage: simplify task exit handling
Free data structures required for guarded storage from
arch_release_task_struct(). This allows to simplify the code a bit,
and also makes the semantics a bit easier: arch_release_task_struct()
is never called from the task that is being removed.

In addition this allows to get rid of exit_thread() in a later patch.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-09-28 07:29:40 +02:00
Heiko Carstens
5ef2d5231d s390/ptrace: fix guarded storage regset handling
If the guarded storage regset for current is supposed to be changed,
the regset from user space is copied directly into the guarded storage
control block.

If then the process gets scheduled away while the control block is
being copied and before the new control block has been loaded, the
result is random: the process can be scheduled away due to a page
fault or preemption. If that happens the already copied parts will be
overwritten by save_gs_cb(), called from switch_to().

Avoid this by copying the data to a temporary buffer on the stack and
do the actual update with preemption disabled.

Fixes: f5bbd72198 ("s390/ptrace: guarded storage regset for the current task")
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-09-28 07:29:40 +02:00
Heiko Carstens
fa1edf3f63 s390/guarded storage: fix possible memory corruption
For PREEMPT enabled kernels the guarded storage (GS) code contains a
possible use-after-free bug. If a task that makes use of GS exits, it
will execute do_exit() while still enabled for preemption.

That function will call exit_thread_runtime_instr() via exit_thread().
If exit_thread_gs() gets preempted after the GS control block of the
task has been freed but before the pointer to it is set to NULL, then
save_gs_cb(), called from switch_to(), will write to already freed
memory.

Avoid this and simply disable preemption while freeing the control
block and setting the pointer to NULL.

Fixes: 916cda1aa1 ("s390: add a system call for guarded storage")
Cc: <stable@vger.kernel.org> # v4.12+
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-09-28 07:29:39 +02:00
Heiko Carstens
8d9047f8b9 s390/runtime instrumentation: simplify task exit handling
Free data structures required for runtime instrumentation from
arch_release_task_struct(). This allows to simplify the code a bit,
and also makes the semantics a bit easier: arch_release_task_struct()
is never called from the task that is being removed.

In addition this allows to get rid of exit_thread() in a later patch.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-09-28 07:29:39 +02:00
Heiko Carstens
d6e646ad7c s390/runtime instrumention: fix possible memory corruption
For PREEMPT enabled kernels the runtime instrumentation (RI) code
contains a possible use-after-free bug. If a task that makes use of RI
exits, it will execute do_exit() while still enabled for preemption.

That function will call exit_thread_runtime_instr() via
exit_thread(). If exit_thread_runtime_instr() gets preempted after the
RI control block of the task has been freed but before the pointer to
it is set to NULL, then save_ri_cb(), called from switch_to(), will
write to already freed memory.

Avoid this and simply disable preemption while freeing the control
block and setting the pointer to NULL.

Fixes: e4b8b3f33f ("s390: add support for runtime instrumentation")
Cc: <stable@vger.kernel.org> # v3.7+
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-09-28 07:29:39 +02:00
Heiko Carstens
8076428f0c s390: convert release_thread() into a static inline function
release_thread() is an empty function that gets called on every task
exit. Move the function to a header file and force inlining of it, so
that the compiler can optimize it away instead of generating a
pointless function call.

Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-09-28 07:29:39 +02:00
Heiko Carstens
51dce3867c s390/topology: enable / disable topology dynamically
Add a new sysctl file /proc/sys/s390/topology which displays if
topology is on (1) or off (0) as specified by the "topology=" kernel
parameter.

This allows to change topology information during runtime and
configuring it via /etc/sysctl.conf instead of using the kernel line
parameter.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-09-20 13:47:55 +02:00
Heiko Carstens
1b25fda053 s390/topology: alternative topology for topology-less machines
If running on machines that do not provide topology information we
currently generate a "fake" topology which defines the maximum
distance between each cpu: each cpu will be put into an own drawer.

Historically this used to be the best option for (virtual) machines in
overcommited hypervisors.

For some workloads however it is better to generate a different
topology where all cpus are siblings within a package (all cpus are
core siblings). This shows performance improvements of up to 10%,
depending on the workload.

In order to keep the current behaviour, but also allow to switch to
the different core sibling topology use the existing "topology="
kernel parameter:

Specifying "topology=on" on machines without topology information will
generate the core siblings (fake) topology information, instead of the
default topology information where all cpus have the maximum distance.

On machines which provide topology information specifying
"topology=on" does not have any effect.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-09-20 13:47:54 +02:00
Al Viro
c60a03fee0 s390: switch to {get,put}_compat_sigset()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-09-19 17:56:04 -04:00
Gerald Schaefer
ba385c0594 s390/mm: fix write access check in gup_huge_pmd()
The check for the _SEGMENT_ENTRY_PROTECT bit in gup_huge_pmd() is the
wrong way around. It must not be set for write==1, and not be checked for
write==0. Fix this similar to how it was fixed for ptes long time ago in
commit 25591b0703 ("[S390] fix get_user_pages_fast").

One impact of this bug would be unnecessarily using the gup slow path for
write==0 on r/w mappings. A potentially more severe impact would be that
gup_huge_pmd() will succeed for write==1 on r/o mappings.

Cc: <stable@vger.kernel.org>
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-09-19 08:36:20 +02:00
Gerald Schaefer
91c575b335 s390/mm: make pmdp_invalidate() do invalidation only
Commit 227be799c3 ("s390/mm: uninline pmdp_xxx functions from pgtable.h")
inadvertently changed the behavior of pmdp_invalidate(), so that it now
clears the pmd instead of just marking it as invalid. Fix this by restoring
the original behavior.

A possible impact of the misbehaving pmdp_invalidate() would be the
MADV_DONTNEED races (see commits ced10803 and 58ceeb6b), although we
should not have any negative impact on the related dirty/young flags,
since those flags are not set by the hardware on s390.

Fixes: 227be799c3 ("s390/mm: uninline pmdp_xxx functions from pgtable.h")
Cc: <stable@vger.kernel.org> # v4.6+
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-09-19 08:36:19 +02:00
Pu Hou
fc3100d64f s390/perf: fix bug when creating per-thread event
A per-thread event could not be created correctly like below:

    perf record --per-thread -e rB0000 -- sleep 1
    Error:
    The sys_perf_event_open() syscall returned with 19 (No such device) for event (rB0000).
    /bin/dmesg may provide additional information.
    No CONFIG_PERF_EVENTS=y kernel support configured?

This bug was introduced by:

    commit c311c79799
    Author: Alexey Dobriyan <adobriyan@gmail.com>
    Date:   Mon May 8 15:56:15 2017 -0700

    cpumask: make "nr_cpumask_bits" unsigned

If a per-thread event is not attached to any CPU, the cpu field
in struct perf_event is -1. The above commit converts the CPU number
to unsigned int, which result in an illegal CPU number.

Fixes: c311c79799 ("cpumask: make "nr_cpumask_bits" unsigned")
Cc: <stable@vger.kernel.org> # v4.12+
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Pu Hou <bjhoupu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-09-13 16:34:23 +02:00
Linus Torvalds
260d16580d Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Martin Schwidefsky:
 "The second patch set for the 4.14 merge window:

   - Convert the dasd device driver to the blk-mq interface.

   - Provide three zcrypt interfaces for vfio_ap. These will be required
     for KVM guest access to the crypto cards attached via the AP bus.

   - A couple of memory management bug fixes."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/dasd: blk-mq conversion
  s390/mm: use a single lock for the fields in mm_context_t
  s390/mm: fix race on mm->context.flush_mm
  s390/mm: fix local TLB flushing vs. detach of an mm address space
  s390/zcrypt: externalize AP queue interrupt control
  s390/zcrypt: externalize AP config info query
  s390/zcrypt: externalize test AP queue
  s390/mm: use VM_BUG_ON in crst_table_[upgrade|downgrade]
2017-09-12 06:01:59 -07:00
Linus Torvalds
dd198ce714 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull namespace updates from Eric Biederman:
 "Life has been busy and I have not gotten half as much done this round
  as I would have liked. I delayed it so that a minor conflict
  resolution with the mips tree could spend a little time in linux-next
  before I sent this pull request.

  This includes two long delayed user namespace changes from Kirill
  Tkhai. It also includes a very useful change from Serge Hallyn that
  allows the security capability attribute to be used inside of user
  namespaces. The practical effect of this is people can now untar
  tarballs and install rpms in user namespaces. It had been suggested to
  generalize this and encode some of the namespace information
  information in the xattr name. Upon close inspection that makes the
  things that should be hard easy and the things that should be easy
  more expensive.

  Then there is my bugfix/cleanup for signal injection that removes the
  magic encoding of the siginfo union member from the kernel internal
  si_code. The mips folks reported the case where I had used FPE_FIXME
  me is impossible so I have remove FPE_FIXME from mips, while at the
  same time including a return statement in that case to keep gcc from
  complaining about unitialized variables.

  I almost finished the work to get make copy_siginfo_to_user a trivial
  copy to user. The code is available at:

     git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace.git neuter-copy_siginfo_to_user-v3

  But I did not have time/energy to get the code posted and reviewed
  before the merge window opened.

  I was able to see that the security excuse for just copying fields
  that we know are initialized doesn't work in practice there are buggy
  initializations that don't initialize the proper fields in siginfo. So
  we still sometimes copy unitialized data to userspace"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  Introduce v3 namespaced file capabilities
  mips/signal: In force_fcr31_sig return in the impossible case
  signal: Remove kernel interal si_code magic
  fcntl: Don't use ambiguous SIG_POLL si_codes
  prctl: Allow local CAP_SYS_ADMIN changing exe_file
  security: Use user_namespace::level to avoid redundant iterations in cap_capable()
  userns,pidns: Verify the userns for new pid namespaces
  signal/testing: Don't look for __SI_FAULT in userspace
  signal/mips: Document a conflict with SI_USER with SIGFPE
  signal/sparc: Document a conflict with SI_USER with SIGFPE
  signal/ia64: Document a conflict with SI_USER with SIGFPE
  signal/alpha: Document a conflict with SI_USER for SIGTRAP
2017-09-11 18:34:47 -07:00
Linus Torvalds
4dfc278803 IOMMU Updates for Linux v4.14
Slightly more changes than usual this time:
 
 	- KDump Kernel IOMMU take-over code for AMD IOMMU. The code now
 	  tries to preserve the mappings of the kernel so that master
 	  aborts for devices are avoided. Master aborts cause some
 	  devices to fail in the kdump kernel, so this code makes the
 	  dump more likely to succeed when AMD IOMMU is enabled.
 
 	- Common flush queue implementation for IOVA code users. The
 	  code is still optional, but AMD and Intel IOMMU drivers had
 	  their own implementation which is now unified.
 
 	- Finish support for iommu-groups. All drivers implement this
 	  feature now so that IOMMU core code can rely on it.
 
 	- Finish support for 'struct iommu_device' in iommu drivers. All
 	  drivers now use the interface.
 
 	- New functions in the IOMMU-API for explicit IO/TLB flushing.
 	  This will help to reduce the number of IO/TLB flushes when
 	  IOMMU drivers support this interface.
 
 	- Support for mt2712 in the Mediatek IOMMU driver
 
 	- New IOMMU driver for QCOM hardware
 
 	- System PM support for ARM-SMMU
 
 	- Shutdown method for ARM-SMMU-v3
 
 	- Some constification patches
 
 	- Various other small improvements and fixes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJZtCFNAAoJECvwRC2XARrjZnQP/AxC/ezQpq82HbegF4sM/cVE
 Ep7TeTqodEl75FS/6txe2wU0pwodqk/LB9ajfQZUbE1w8vKsNEqi5qf4ZYHGoxYI
 5bWyjJBzKIlwENH5lsBpQNt6XLevrYmRsFy7F0tRYy+qPQq8k+js2i7/XkCL3q7L
 3xklF847RRoITaTOhhaROx1pF23dSMEsS2XGuWHcZfjORtep4wcFKzd/2SvlCWCo
 P2bRU7jBzfJuuGSA80gaiUbDmrULTUfYuZNp7njASzCgsDmagERtvDEpdoXPNNSp
 u6s4LjU1Dp3fgr6g6cFRO7B6JUbWd619nwo9so/c/wZN54yEngBF9EyeeF3mv2O5
 ZbM2mOW3RlZcjxFT/AC8G4cZwwP6MpCEQOdqknoqc6ZQwcDqwN0o9I4+po0wsiAU
 89ijZZe9Mx0p9lNpihaBEB1erAUWPo5Obh62zo80W3h6x9WzkGQWM+PyFK2DYoaC
 8biEZzcc21sLEHvXQkcEGJSKrihHr9sluOqvxmCw5QAkYIFAeZRoeH7JtZWjVCnr
 T3XvaG1G1Aw6tS7ErxufdKawREAGki0Rm9i1baiH9sqNj5rllM01Y+PgU6E21Nbg
 iZp9gJLjfwM4vhYLlovvQK5PRoOBsCkyCpEI4GJqjLeam5p/WN06CFFf0ifQofYr
 qDPCVDkWHWV8nugFFKE7
 =EVh9
 -----END PGP SIGNATURE-----

Merge tag 'iommu-updates-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull IOMMU updates from Joerg Roedel:
 "Slightly more changes than usual this time:

   - KDump Kernel IOMMU take-over code for AMD IOMMU. The code now tries
     to preserve the mappings of the kernel so that master aborts for
     devices are avoided. Master aborts cause some devices to fail in
     the kdump kernel, so this code makes the dump more likely to
     succeed when AMD IOMMU is enabled.

   - common flush queue implementation for IOVA code users. The code is
     still optional, but AMD and Intel IOMMU drivers had their own
     implementation which is now unified.

   - finish support for iommu-groups. All drivers implement this feature
     now so that IOMMU core code can rely on it.

   - finish support for 'struct iommu_device' in iommu drivers. All
     drivers now use the interface.

   - new functions in the IOMMU-API for explicit IO/TLB flushing. This
     will help to reduce the number of IO/TLB flushes when IOMMU drivers
     support this interface.

   - support for mt2712 in the Mediatek IOMMU driver

   - new IOMMU driver for QCOM hardware

   - system PM support for ARM-SMMU

   - shutdown method for ARM-SMMU-v3

   - some constification patches

   - various other small improvements and fixes"

* tag 'iommu-updates-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (87 commits)
  iommu/vt-d: Don't be too aggressive when clearing one context entry
  iommu: Introduce Interface for IOMMU TLB Flushing
  iommu/s390: Constify iommu_ops
  iommu/vt-d: Avoid calling virt_to_phys() on null pointer
  iommu/vt-d: IOMMU Page Request needs to check if address is canonical.
  arm/tegra: Call bus_set_iommu() after iommu_device_register()
  iommu/exynos: Constify iommu_ops
  iommu/ipmmu-vmsa: Make ipmmu_gather_ops const
  iommu/ipmmu-vmsa: Rereserving a free context before setting up a pagetable
  iommu/amd: Rename a few flush functions
  iommu/amd: Check if domain is NULL in get_domain() and return -EBUSY
  iommu/mediatek: Fix a build warning of BIT(32) in ARM
  iommu/mediatek: Fix a build fail of m4u_type
  iommu: qcom: annotate PM functions as __maybe_unused
  iommu/pamu: Fix PAMU boot crash
  memory: mtk-smi: Degrade SMI init to module_init
  iommu/mediatek: Enlarge the validate PA range for 4GB mode
  iommu/mediatek: Disable iommu clock when system suspend
  iommu/mediatek: Move pgtable allocation into domain_alloc
  iommu/mediatek: Merge 2 M4U HWs into one iommu domain
  ...
2017-09-09 15:03:24 -07:00
Linus Torvalds
0d519f2d1e pci-v4.14-changes
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZsr8cAAoJEFmIoMA60/r8lXYQAKViYIRMJDD4n3NhjMeLOsnJ
 vwaBmWlLRjSFIEpag5kMjS1RJE17qAvmkBZnDvSNZ6cT28INkkZnVM2IW96WECVq
 64MIvDijVPcvqGuWePCfWdDiSXApiDWwJuw55BOhmvV996wGy0gYgzpPY+1g0Knh
 XzH9IOzDL79hZleLfsxX0MLV6FGBVtOsr0jvQ04k4IgEMIxEDTlbw85rnrvzQUtc
 0Vj2koaxWIESZsq7G/wiZb2n6ekaFdXO/VlVvvhmTSDLCBaJ63Hb/gfOhwMuVkS6
 B3cVprNrCT0dSzWmU4ZXf+wpOyDpBexlemW/OR/6CQUkC6AUS6kQ5si1X44dbGmJ
 nBPh414tdlm/6V4h/A3UFPOajSGa/ZWZ/uQZPfvKs1R6WfjUerWVBfUpAzPbgjam
 c/mhJ19HYT1J7vFBfhekBMeY2Px3JgSJ9rNsrFl48ynAALaX5GEwdpo4aqBfscKz
 4/f9fU4ysumopvCEuKD2SsJvsPKd5gMQGGtvAhXM1TxvAoQ5V4cc99qEetAPXXPf
 h2EqWm4ph7YP4a+n/OZBjzluHCmZJn1CntH5+//6wpUk6HnmzsftGELuO9n12cLE
 GGkreI3T9ctV1eOkzVVa0l0QTE1X/VLyEyKCtb9obXsDaG4Ud7uKQoZgB19DwyTJ
 EG76ridTolUFVV+wzJD9
 =9cLP
 -----END PGP SIGNATURE-----

Merge tag 'pci-v4.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:

 - add enhanced Downstream Port Containment support, which prints more
   details about Root Port Programmed I/O errors (Dongdong Liu)

 - add Layerscape ls1088a and ls2088a support (Hou Zhiqiang)

 - add MediaTek MT2712 and MT7622 support (Ryder Lee)

 - add MediaTek MT2712 and MT7622 MSI support (Honghui Zhang)

 - add Qualcom IPQ8074 support (Varadarajan Narayanan)

 - add R-Car r8a7743/5 device tree support (Biju Das)

 - add Rockchip per-lane PHY support for better power management (Shawn
   Lin)

 - fix IRQ mapping for hot-added devices by replacing the
   pci_fixup_irqs() boot-time design with a host bridge hook called at
   probe-time (Lorenzo Pieralisi, Matthew Minter)

 - fix race when enabling two devices that results in upstream bridge
   not being enabled correctly (Srinath Mannam)

 - fix pciehp power fault infinite loop (Keith Busch)

 - fix SHPC bridge MSI hotplug events by enabling bus mastering
   (Aleksandr Bezzubikov)

 - fix a VFIO issue by correcting PCIe capability sizes (Alex
   Williamson)

 - fix an INTD issue on Xilinx and possibly other drivers by unifying
   INTx IRQ domain support (Paul Burton)

 - avoid IOMMU stalls by marking AMD Stoney GPU ATS as broken (Joerg
   Roedel)

 - allow APM X-Gene device assignment to guests by adding an ACS quirk
   (Feng Kan)

 - fix driver crashes by disabling Extended Tags on Broadcom HT2100
   (Extended Tags support is required for PCIe Receivers but not
   Requesters, and we now enable them by default when Requesters support
   them) (Sinan Kaya)

 - fix MSIs for devices that use phantom RIDs for DMA by assuming MSIs
   use the real Requester ID (not a phantom RID) (Robin Murphy)

 - prevent assignment of Intel VMD children to guests (which may be
   supported eventually, but isn't yet) by not associating an IOMMU with
   them (Jon Derrick)

 - fix Intel VMD suspend/resume by releasing IRQs on suspend (Scott
   Bauer)

 - fix a Function-Level Reset issue with Intel 750 NVMe by waiting
   longer (up to 60sec instead of 1sec) for device to become ready
   (Sinan Kaya)

 - fix a Function-Level Reset issue on iProc Stingray by working around
   hardware defects in the CRS implementation (Oza Pawandeep)

 - fix an issue with Intel NVMe P3700 after an iProc reset by adding a
   delay during shutdown (Oza Pawandeep)

 - fix a Microsoft Hyper-V lockdep issue by polling instead of blocking
   in compose_msi_msg() (Stephen Hemminger)

 - fix a wireless LAN driver timeout by clearing DesignWare MSI
   interrupt status after it is handled, not before (Faiz Abbas)

 - fix DesignWare ATU enable checking (Jisheng Zhang)

 - reduce Layerscape dependencies on the bootloader by doing more
   initialization in the driver (Hou Zhiqiang)

 - improve Intel VMD performance allowing allocation of more IRQ vectors
   than present CPUs (Keith Busch)

 - improve endpoint framework support for initial DMA mask, different
   BAR sizes, configurable page sizes, MSI, test driver, etc (Kishon
   Vijay Abraham I, Stan Drozd)

 - rework CRS support to add periodic messages while we poll during
   enumeration and after Function-Level Reset and prepare for possible
   other uses of CRS (Sinan Kaya)

 - clean up Root Port AER handling by removing unnecessary code and
   moving error handler methods to struct pcie_port_service_driver
   (Christoph Hellwig)

 - clean up error handling paths in various drivers (Bjorn Andersson,
   Fabio Estevam, Gustavo A. R. Silva, Harunobu Kurokawa, Jeffy Chen,
   Lorenzo Pieralisi, Sergei Shtylyov)

 - clean up SR-IOV resource handling by disabling VF decoding before
   updating the corresponding resource structs (Gavin Shan)

 - clean up DesignWare-based drivers by unifying quirks to update Class
   Code and Interrupt Pin and related handling of write-protected
   registers (Hou Zhiqiang)

 - clean up by adding empty generic pcibios_align_resource() and
   pcibios_fixup_bus() and removing empty arch-specific implementations
   (Palmer Dabbelt)

 - request exclusive reset control for several drivers to allow cleanup
   elsewhere (Philipp Zabel)

 - constify various structures (Arvind Yadav, Bhumika Goyal)

 - convert from full_name() to %pOF (Rob Herring)

 - remove unused variables from iProc, HiSi, Altera, Keystone (Shawn
   Lin)

* tag 'pci-v4.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (170 commits)
  PCI: xgene: Clean up whitespace
  PCI: xgene: Define XGENE_PCI_EXP_CAP and use generic PCI_EXP_RTCTL offset
  PCI: xgene: Fix platform_get_irq() error handling
  PCI: xilinx-nwl: Fix platform_get_irq() error handling
  PCI: rockchip: Fix platform_get_irq() error handling
  PCI: altera: Fix platform_get_irq() error handling
  PCI: spear13xx: Fix platform_get_irq() error handling
  PCI: artpec6: Fix platform_get_irq() error handling
  PCI: armada8k: Fix platform_get_irq() error handling
  PCI: dra7xx: Fix platform_get_irq() error handling
  PCI: exynos: Fix platform_get_irq() error handling
  PCI: iproc: Clean up whitespace
  PCI: iproc: Rename PCI_EXP_CAP to IPROC_PCI_EXP_CAP
  PCI: iproc: Add 500ms delay during device shutdown
  PCI: Fix typos and whitespace errors
  PCI: Remove unused "res" variable from pci_resource_io()
  PCI: Correct kernel-doc of pci_vpd_srdt_size(), pci_vpd_srdt_tag()
  PCI/AER: Reformat AER register definitions
  iommu/vt-d: Prevent VMD child devices from being remapping targets
  x86/PCI: Use is_vmd() rather than relying on the domain number
  ...
2017-09-08 15:47:43 -07:00
Linus Torvalds
0756b7fbb6 First batch of KVM changes for 4.14
Common:
  - improve heuristic for boosting preempted spinlocks by ignoring VCPUs
    in user mode
 
 ARM:
  - fix for decoding external abort types from guests
 
  - added support for migrating the active priority of interrupts when
    running a GICv2 guest on a GICv3 host
 
  - minor cleanup
 
 PPC:
  - expose storage keys to userspace
 
  - merge powerpc/topic/ppc-kvm branch that contains
    find_linux_pte_or_hugepte and POWER9 thread management cleanup
 
  - merge kvm-ppc-fixes with a fix that missed 4.13 because of vacations
 
  - fixes
 
 s390:
  - merge of topic branch tlb-flushing from the s390 tree to get the
    no-dat base features
 
  - merge of kvm/master to avoid conflicts with additional sthyi fixes
 
  - wire up the no-dat enhancements in KVM
 
  - multiple epoch facility (z14 feature)
 
  - Configuration z/Architecture Mode
 
  - more sthyi fixes
 
  - gdb server range checking fix
 
  - small code cleanups
 
 x86:
  - emulate Hyper-V TSC frequency MSRs
 
  - add nested INVPCID
 
  - emulate EPTP switching VMFUNC
 
  - support Virtual GIF
 
  - support 5 level page tables
 
  - speedup nested VM exits by packing byte operations
 
  - speedup MMIO by using hardware provided physical address
 
  - a lot of fixes and cleanups, especially nested
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABCAAGBQJZspE1AAoJEED/6hsPKofoDcMIALT11n+LKV50QGwQdg2W1GOt
 aChbgnj/Kegit3hQlDhVNb8kmdZEOZzSL81Lh0VPEr7zXU8QiWn2snbizDPv8sde
 MpHhcZYZZ0YrpoiZKjl8yiwcu88OWGn2qtJ7OpuTS5hvEGAfxMncp0AMZho6fnz/
 ySTwJ9GK2MTgBw39OAzCeDOeoYn4NKYMwjJGqBXRhNX8PG/1wmfqv0vPrd6wfg31
 KJ58BumavwJjr8YbQ1xELm9rpQrAmaayIsG0R1dEUqCbt5a1+t2gt4h2uY7tWcIv
 ACt2bIze7eF3xA+OpRs+eT+yemiH3t9btIVmhCfzUpnQ+V5Z55VMSwASLtTuJRQ=
 =R8Ry
 -----END PGP SIGNATURE-----

Merge tag 'kvm-4.14-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM updates from Radim Krčmář:
 "First batch of KVM changes for 4.14

  Common:
   - improve heuristic for boosting preempted spinlocks by ignoring
     VCPUs in user mode

  ARM:
   - fix for decoding external abort types from guests

   - added support for migrating the active priority of interrupts when
     running a GICv2 guest on a GICv3 host

   - minor cleanup

  PPC:
   - expose storage keys to userspace

   - merge kvm-ppc-fixes with a fix that missed 4.13 because of
     vacations

   - fixes

  s390:
   - merge of kvm/master to avoid conflicts with additional sthyi fixes

   - wire up the no-dat enhancements in KVM

   - multiple epoch facility (z14 feature)

   - Configuration z/Architecture Mode

   - more sthyi fixes

   - gdb server range checking fix

   - small code cleanups

  x86:
   - emulate Hyper-V TSC frequency MSRs

   - add nested INVPCID

   - emulate EPTP switching VMFUNC

   - support Virtual GIF

   - support 5 level page tables

   - speedup nested VM exits by packing byte operations

   - speedup MMIO by using hardware provided physical address

   - a lot of fixes and cleanups, especially nested"

* tag 'kvm-4.14-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (67 commits)
  KVM: arm/arm64: Support uaccess of GICC_APRn
  KVM: arm/arm64: Extract GICv3 max APRn index calculation
  KVM: arm/arm64: vITS: Drop its_ite->lpi field
  KVM: arm/arm64: vgic: constify seq_operations and file_operations
  KVM: arm/arm64: Fix guest external abort matching
  KVM: PPC: Book3S HV: Fix memory leak in kvm_vm_ioctl_get_htab_fd
  KVM: s390: vsie: cleanup mcck reinjection
  KVM: s390: use WARN_ON_ONCE only for checking
  KVM: s390: guestdbg: fix range check
  KVM: PPC: Book3S HV: Report storage key support to userspace
  KVM: PPC: Book3S HV: Fix case where HDEC is treated as 32-bit on POWER9
  KVM: PPC: Book3S HV: Fix invalid use of register expression
  KVM: PPC: Book3S HV: Fix H_REGISTER_VPA VPA size validation
  KVM: PPC: Book3S HV: Fix setting of storage key in H_ENTER
  KVM: PPC: e500mc: Fix a NULL dereference
  KVM: PPC: e500: Fix some NULL dereferences on error
  KVM: PPC: Book3S HV: Protect updates to spapr_tce_tables list
  KVM: s390: we are always in czam mode
  KVM: s390: expose no-DAT to guest and migration support
  KVM: s390: sthyi: remove invalid guest write access
  ...
2017-09-08 15:18:36 -07:00
Radim Krčmář
5f54c8b2d4 Merge branch 'kvm-ppc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
This fix was intended for 4.13, but didn't get in because both
maintainers were on vacation.

Paul Mackerras:
 "It adds mutual exclusion between list_add_rcu and list_del_rcu calls
  on the kvm->arch.spapr_tce_tables list.  Without this, userspace could
  potentially trigger corruption of the list and cause a host crash or
  worse."
2017-09-08 14:40:43 +02:00
Radim Krčmář
6e0ff1b4db KVM: s390: Fixes and features for 4.14
- merge of topic branch tlb-flushing from the s390 tree to get the
   no-dat base features
 - merge of kvm/master to avoid conflicts with additional sthyi fixes
 - wire up the no-dat enhancements in KVM
 - multiple epoch facility (z14 feature)
 - Configuration z/Architecture Mode
 - more sthyi fixes
 - gdb server range checking fix
 - small code cleanups
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJZqQt+AAoJEBF7vIC1phx82jcP/0PgDUFpyaq50R1LhoLoXfsv
 55x8hZFJzkBTapv6ckb9MP1J90htbmYXUDbgk/JS7ElenLvLw6r9QenHJnLYRoJ4
 s4ApooG5/wpbQWdxfqZaNHZEV1/Fgvv+R348k8cFfhrzJdOd0p7I+qkd5FOX2VTl
 NGk+cR03yhtPOYeUb90k40k0kGmY7acdnYe2txUoh7qC38vPVwMJA6S01mWbB3sm
 ApQN9hzGvXhT833dVTNMS33uCds/9nCHtMn0viqTfs9AWKIs62nK4L54c5dgZWpH
 u7+ji5OUEbV+8QQH5G1OmWUIo3sKO5MVS0P9jbh0bIIdUZvUKdchFP8bQcmde02E
 IgYgjbgmKc8Zec+Z0PHs5Gy+VbGXpqg0nvwyzK96fh/KM7aepxHUfDOdWWj8qbgI
 4sc2fe5JFkP5IldYgJlMPSm4GqLNDkbGFnLralkaqhRvjS1sNjgXxcCclLQQaI5H
 kMklzkNpMQ9yC7pYLjq7AKOzmMdHqq90rAIq0zQSYQjMoiC2RLYFyjFwsK3KlmeJ
 GRgYrIZOVkYONZhT4F81piGcuRsbCGSXZ5I5i/QxJ/EgNGO8EcGrrONAk1NW9Dsp
 q9qu/aKXOzGe57jjP+MonH4bcrHLCmcpkxS9sgiECu0PtutzbGdZPUXA9Pj9YMON
 7kQXrwPgEHhn62+l/JdO
 =N/6G
 -----END PGP SIGNATURE-----

Merge tag 'kvm-s390-next-4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux

KVM: s390: Fixes and features for 4.14

- merge of topic branch tlb-flushing from the s390 tree to get the
  no-dat base features
- merge of kvm/master to avoid conflicts with additional sthyi fixes
- wire up the no-dat enhancements in KVM
- multiple epoch facility (z14 feature)
- Configuration z/Architecture Mode
- more sthyi fixes
- gdb server range checking fix
- small code cleanups
2017-09-07 16:46:46 +02:00
Linus Torvalds
aae3dbb477 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:

 1) Support ipv6 checksum offload in sunvnet driver, from Shannon
    Nelson.

 2) Move to RB-tree instead of custom AVL code in inetpeer, from Eric
    Dumazet.

 3) Allow generic XDP to work on virtual devices, from John Fastabend.

 4) Add bpf device maps and XDP_REDIRECT, which can be used to build
    arbitrary switching frameworks using XDP. From John Fastabend.

 5) Remove UFO offloads from the tree, gave us little other than bugs.

 6) Remove the IPSEC flow cache, from Florian Westphal.

 7) Support ipv6 route offload in mlxsw driver.

 8) Support VF representors in bnxt_en, from Sathya Perla.

 9) Add support for forward error correction modes to ethtool, from
    Vidya Sagar Ravipati.

10) Add time filter for packet scheduler action dumping, from Jamal Hadi
    Salim.

11) Extend the zerocopy sendmsg() used by virtio and tap to regular
    sockets via MSG_ZEROCOPY. From Willem de Bruijn.

12) Significantly rework value tracking in the BPF verifier, from Edward
    Cree.

13) Add new jump instructions to eBPF, from Daniel Borkmann.

14) Rework rtnetlink plumbing so that operations can be run without
    taking the RTNL semaphore. From Florian Westphal.

15) Support XDP in tap driver, from Jason Wang.

16) Add 32-bit eBPF JIT for ARM, from Shubham Bansal.

17) Add Huawei hinic ethernet driver.

18) Allow to report MD5 keys in TCP inet_diag dumps, from Ivan
    Delalande.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1780 commits)
  i40e: point wb_desc at the nvm_wb_desc during i40e_read_nvm_aq
  i40e: avoid NVM acquire deadlock during NVM update
  drivers: net: xgene: Remove return statement from void function
  drivers: net: xgene: Configure tx/rx delay for ACPI
  drivers: net: xgene: Read tx/rx delay for ACPI
  rocker: fix kcalloc parameter order
  rds: Fix non-atomic operation on shared flag variable
  net: sched: don't use GFP_KERNEL under spin lock
  vhost_net: correctly check tx avail during rx busy polling
  net: mdio-mux: add mdio_mux parameter to mdio_mux_init()
  rxrpc: Make service connection lookup always check for retry
  net: stmmac: Delete dead code for MDIO registration
  gianfar: Fix Tx flow control deactivation
  cxgb4: Ignore MPS_TX_INT_CAUSE[Bubble] for T6
  cxgb4: Fix pause frame count in t4_get_port_stats
  cxgb4: fix memory leak
  tun: rename generic_xdp to skb_xdp
  tun: reserve extra headroom only when XDP is set
  net: dsa: bcm_sf2: Configure IMP port TC2QOS mapping
  net: dsa: bcm_sf2: Advertise number of egress queues
  ...
2017-09-06 14:45:08 -07:00
Martin Schwidefsky
f28a4b4ddf s390/mm: use a single lock for the fields in mm_context_t
The three locks 'lock', 'pgtable_lock' and 'gmap_lock' in the
mm_context_t can be reduced to a single lock.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-09-06 09:24:43 +02:00
Martin Schwidefsky
60f07c8ec5 s390/mm: fix race on mm->context.flush_mm
The order in __tlb_flush_mm_lazy is to flush TLB first and then clear
the mm->context.flush_mm bit. This can lead to missed flushes as the
bit can be set anytime, the order needs to be the other way aronud.

But this leads to a different race, __tlb_flush_mm_lazy may be called
on two CPUs concurrently. If mm->context.flush_mm is cleared first then
another CPU can bypass __tlb_flush_mm_lazy although the first CPU has
not done the flush yet. In a virtualized environment the time until the
flush is finally completed can be arbitrarily long.

Add a spinlock to serialize __tlb_flush_mm_lazy and use the function
in finish_arch_post_lock_switch as well.

Cc: <stable@vger.kernel.org>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-09-06 09:24:42 +02:00
Martin Schwidefsky
b3e5dc45fd s390/mm: fix local TLB flushing vs. detach of an mm address space
The local TLB flushing code keeps an additional mask in the mm.context,
the cpu_attach_mask. At the time a global flush of an address space is
done the cpu_attach_mask is copied to the mm_cpumask in order to avoid
future global flushes in case the mm is used by a single CPU only after
the flush.

Trouble is that the reset of the mm_cpumask is racy against the detach
of an mm address space by switch_mm. The current order is first the
global TLB flush and then the copy of the cpu_attach_mask to the
mm_cpumask. The order needs to be the other way around.

Cc: <stable@vger.kernel.org>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-09-06 09:24:42 +02:00
Harald Freudenberger
46fde9a9d2 s390/zcrypt: externalize AP queue interrupt control
KVM has a need to control the interrupts on real and virtualized
AP queue devices. This fix provides a new function to control
the interrupt facilities of an AP queue device.

Signed-off-by: Harald Freudenberger <freude@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-09-06 09:24:42 +02:00
Harald Freudenberger
050349b5b7 s390/zcrypt: externalize AP config info query
KVM has a need to fetch the crypto configuration information
as it is returned by the PQAP(QCI) instruction. This patch
introduces a new API ap_query_configuration() which provides
this info in a handy way for the caller.

Signed-off-by: Harald Freudenberger <freude@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-09-06 09:24:42 +02:00
Tony Krowiak
e7fc5146cf s390/zcrypt: externalize test AP queue
Under certain specified conditions, the Test AP Queue (TAPQ)
subfunction of the Process Adjunct Processor Queue (PQAP) instruction
will be intercepted by a guest VM. The guest VM must have a means for
executing the intercepted instruction.

The vfio_ap driver will provide an interface to execute the
PQAP(TAPQ) instruction subfunction on behalf of a guest VM.
The code for executing the AP instructions currently resides in the
AP bus. This patch refactors the AP bus code to externalize access
to the PQAP(TAPQ) instruction subfunction to make it available to
the vfio_ap driver.

Signed-off-by: Tony Krowiak <akrowiak@linux.vnet.ibm.com>
Signed-off-by: Harald Freudenberger <freude@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-09-06 09:24:42 +02:00
Martin Schwidefsky
2fc4876ea8 s390/mm: use VM_BUG_ON in crst_table_[upgrade|downgrade]
The BUG_ON in crst_table_[upgrade|downgrade] is a debugging aid,
replace it with VM_BUG_ON.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-09-06 09:24:41 +02:00
Linus Torvalds
9e85ae6af6 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Martin Schwidefsky:
 "The first part of the s390 updates for 4.14:

   - Add machine type 0x3906 for IBM z14

   - Add IBM z14 TLB flushing improvements for KVM guests

   - Exploit the TOD clock epoch extension to provide a continuous TOD
     clock afer 2042/09/17

   - Add NIAI spinlock hints for IBM z14

   - Rework the vmcp driver and use CMA for the respone buffer of z/VM
     CP commands

   - Drop some s390 specific asm headers and use the generic version

   - Add block discard for DASD-FBA devices under z/VM

   - Add average request times to DASD statistics

   - A few of those constify patches which seem to be in vogue right now

   - Cleanup and bug fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (50 commits)
  s390/mm: avoid empty zero pages for KVM guests to avoid postcopy hangs
  s390/dasd: Add discard support for FBA devices
  s390/zcrypt: make CPRBX const
  s390/uaccess: avoid mvcos jump label
  s390/mm: use generic mm_hooks
  s390/facilities: fix typo
  s390/vmcp: simplify vmcp_response_free()
  s390/topology: Remove the unused parent_node() macro
  s390/dasd: Change unsigned long long to unsigned long
  s390/smp: convert cpuhp_setup_state() return code to zero on success
  s390: fix 'novx' early parameter handling
  s390/dasd: add average request times to dasd statistics
  s390/scm: use common completion path
  s390/pci: log changes to uid checking
  s390/vmcp: simplify vmcp_ioctl()
  s390/vmcp: return -ENOTTY for unknown ioctl commands
  s390/vmcp: split vmcp header file and move to uapi
  s390/vmcp: make use of contiguous memory allocator
  s390/cpcmd,vmcp: avoid GFP_DMA allocations
  s390/vmcp: fix uaccess check and avoid undefined behavior
  ...
2017-09-05 09:45:46 -07:00
Linus Torvalds
5f82e71a00 Merge branch 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:

 - Add 'cross-release' support to lockdep, which allows APIs like
   completions, where it's not the 'owner' who releases the lock, to be
   tracked. It's all activated automatically under
   CONFIG_PROVE_LOCKING=y.

 - Clean up (restructure) the x86 atomics op implementation to be more
   readable, in preparation of KASAN annotations. (Dmitry Vyukov)

 - Fix static keys (Paolo Bonzini)

 - Add killable versions of down_read() et al (Kirill Tkhai)

 - Rework and fix jump_label locking (Marc Zyngier, Paolo Bonzini)

 - Rework (and fix) tlb_flush_pending() barriers (Peter Zijlstra)

 - Remove smp_mb__before_spinlock() and convert its usages, introduce
   smp_mb__after_spinlock() (Peter Zijlstra)

* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (56 commits)
  locking/lockdep/selftests: Fix mixed read-write ABBA tests
  sched/completion: Avoid unnecessary stack allocation for COMPLETION_INITIALIZER_ONSTACK()
  acpi/nfit: Fix COMPLETION_INITIALIZER_ONSTACK() abuse
  locking/pvqspinlock: Relax cmpxchg's to improve performance on some architectures
  smp: Avoid using two cache lines for struct call_single_data
  locking/lockdep: Untangle xhlock history save/restore from task independence
  locking/refcounts, x86/asm: Disable CONFIG_ARCH_HAS_REFCOUNT for the time being
  futex: Remove duplicated code and fix undefined behaviour
  Documentation/locking/atomic: Finish the document...
  locking/lockdep: Fix workqueue crossrelease annotation
  workqueue/lockdep: 'Fix' flush_work() annotation
  locking/lockdep/selftests: Add mixed read-write ABBA tests
  mm, locking/barriers: Clarify tlb_flush_pending() barriers
  locking/lockdep: Make CONFIG_LOCKDEP_CROSSRELEASE and CONFIG_LOCKDEP_COMPLETIONS truly non-interactive
  locking/lockdep: Explicitly initialize wq_barrier::done::map
  locking/lockdep: Rename CONFIG_LOCKDEP_COMPLETE to CONFIG_LOCKDEP_COMPLETIONS
  locking/lockdep: Reword title of LOCKDEP_CROSSRELEASE config
  locking/lockdep: Make CONFIG_LOCKDEP_CROSSRELEASE part of CONFIG_PROVE_LOCKING
  locking/refcounts, x86/asm: Implement fast refcount overflow protection
  locking/lockdep: Fix the rollback and overwrite detection logic in crossrelease
  ...
2017-09-04 11:52:29 -07:00
Linus Torvalds
0081a0ce80 Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnad:
 "The main RCU related changes in this cycle were:

   - Removal of spin_unlock_wait()
   - SRCU updates
   - RCU torture-test updates
   - RCU Documentation updates
   - Extend the sys_membarrier() ABI with the MEMBARRIER_CMD_PRIVATE_EXPEDITED variant
   - Miscellaneous RCU fixes
   - CPU-hotplug fixes"

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (63 commits)
  arch: Remove spin_unlock_wait() arch-specific definitions
  locking: Remove spin_unlock_wait() generic definitions
  drivers/ata: Replace spin_unlock_wait() with lock/unlock pair
  ipc: Replace spin_unlock_wait() with lock/unlock pair
  exit: Replace spin_unlock_wait() with lock/unlock pair
  completion: Replace spin_unlock_wait() with lock/unlock pair
  doc: Set down RCU's scheduling-clock-interrupt needs
  doc: No longer allowed to use rcu_dereference on non-pointers
  doc: Add RCU files to docbook-generation files
  doc: Update memory-barriers.txt for read-to-write dependencies
  doc: Update RCU documentation
  membarrier: Provide expedited private command
  rcu: Remove exports from rcu_idle_exit() and rcu_idle_enter()
  rcu: Add warning to rcu_idle_enter() for irqs enabled
  rcu: Make rcu_idle_enter() rely on callers disabling irqs
  rcu: Add assertions verifying blocked-tasks list
  rcu/tracing: Set disable_rcu_irq_enter on rcu_eqs_exit()
  rcu: Add TPS() protection for _rcu_barrier_trace strings
  rcu: Use idle versions of swait to make idle-hack clear
  swait: Add idle variants which don't contribute to load average
  ...
2017-09-04 08:13:52 -07:00
Ingo Molnar
edc2988c54 Merge branch 'linus' into locking/core, to fix up conflicts
Conflicts:
	mm/page_alloc.c

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-09-04 11:01:18 +02:00
Linus Torvalds
69c0067aa3 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc fixes from Al Viro:
 "Loose ends and regressions from the last merge window.

  Strictly speaking, only binfmt_flat thing is a build regression per
  se - the rest is 'only sparse cares about that' stuff"

[ This came in before the 4.13 release and could have gone there, but it
  was late in the release and nothing seemed critical enough to care, so
  I'm pulling it in the 4.14 merge window instead  - Linus ]

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  binfmt_flat: fix arch/m32r and arch/microblaze flat_put_addr_at_rp()
  compat_hdio_ioctl: Fix a declaration
  <linux/uaccess.h>: Fix copy_in_user() declaration
  annotate RWF_... flags
  teach SYSCALL_DEFINE/COMPAT_SYSCALL_DEFINE to handle __bitwise arguments
2017-09-03 16:09:03 -07:00
David S. Miller
6026e043d0 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Three cases of simple overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-01 17:42:05 -07:00
Joerg Roedel
47b59d8e40 Merge branches 'arm/exynos', 'arm/renesas', 'arm/rockchip', 'arm/omap', 'arm/mediatek', 'arm/tegra', 'arm/qcom', 'arm/smmu', 'ppc/pamu', 'x86/vt-d', 'x86/amd', 's390' and 'core' into next 2017-09-01 11:31:42 +02:00
Al Viro
4f59c71852 teach SYSCALL_DEFINE/COMPAT_SYSCALL_DEFINE to handle __bitwise arguments
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-08-31 17:32:37 -04:00
Martin Schwidefsky
8ab867cb08 s390/mm: fix BUG_ON in crst_table_upgrade
A 31-bit compat process can force a BUG_ON in crst_table_upgrade
with specific, invalid mmap calls, e.g.

   mmap((void*) 0x7fff8000, 0x10000, 3, 32, -1, 0)

The arch_get_unmapped_area[_topdown] functions miss an if condition
in the decision to do a page table upgrade.

Fixes: 9b11c7912d ("s390/mm: simplify arch_get_unmapped_area[_topdown]")
Cc: <stable@vger.kernel.org>  # v4.12+
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-08-31 14:03:21 +02:00
Martin Schwidefsky
0b89ede629 s390/mm: fork vs. 5 level page tabel
The mm->context.asce field of a new process is not set up correctly
in case of a fork with a 5 level page table.
Add the missing case to init_new_context().

Fixes: 1aea9b3f92 ("s390/mm: implement 5 level pages tables")
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-08-31 14:03:21 +02:00
David Hildenbrand
c95c895303 KVM: s390: vsie: cleanup mcck reinjection
The machine check information is part of the vsie_page.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170830160603.5452-4-david@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-08-31 13:49:40 +02:00
David Hildenbrand
3dbf0205b1 KVM: s390: use WARN_ON_ONCE only for checking
Move the real logic that always has to be executed out of the
WARN_ON_ONCE.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170830160603.5452-3-david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-08-31 13:49:39 +02:00
David Hildenbrand
8149fc0772 KVM: s390: guestdbg: fix range check
Looks like the "overflowing" range check is wrong.

|=======b-------a=======|

addr >= a || addr <= b

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170830160603.5452-2-david@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-08-31 13:49:39 +02:00
David Hildenbrand
1935222dc2 KVM: s390: we are always in czam mode
Independent of the underlying hardware, kvm will now always handle
SIGP SET ARCHITECTURE as if czam were enabled. Therefore, let's not
only forward that bit but always set it.

While at it, add a comment regarding STHYI.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170829143108.14703-1-david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-08-29 16:50:20 +02:00
Christian Borntraeger
fa41ba0d08 s390/mm: avoid empty zero pages for KVM guests to avoid postcopy hangs
Right now there is a potential hang situation for postcopy migrations,
if the guest is enabling storage keys on the target system during the
postcopy process.

For storage key virtualization, we have to forbid the empty zero page as
the storage key is a property of the physical page frame.  As we enable
storage key handling lazily we then drop all mappings for empty zero
pages for lazy refaulting later on.

This does not work with the postcopy migration, which relies on the
empty zero page never triggering a fault again in the future. The reason
is that postcopy migration will simply read a page on the target system
if that page is a known zero page to fault in an empty zero page.  At
the same time postcopy remembers that this page was already transferred
- so any future userfault on that page will NOT be retransmitted again
to avoid races.

If now the guest enters the storage key mode while in postcopy, we will
break this assumption of postcopy.

The solution is to disable the empty zero page for KVM guests early on
and not during storage key enablement. With this change, the postcopy
migration process is guaranteed to start after no zero pages are left.

As guest pages are very likely not empty zero pages anyway the memory
overhead is also pretty small.

While at it this also adds proper page table locking to the zero page
removal.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-08-29 16:31:27 +02:00
Jan Höppner
28b841b3a7 s390/dasd: Add discard support for FBA devices
The z/VM hypervisor provides virtual disks (VDISK) which are backed by
main memory of the hypervisor. Those devices are seen as DASD FBA disks
within the Linux guest.

Whenever data is written to such a device, memory is allocated
on-the-fly by z/VM accordingly. This memory, however, is not being freed
if data on the device is deleted by the guest OS.

In order to make memory usable after deletion again, add discard support
to the FBA discipline.

While at it, update comments regarding the DASD_FEATURE_* flags.

Reviewed-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-08-29 16:31:26 +02:00
Martin Schwidefsky
d66bf801e0 s390/uaccess: avoid mvcos jump label
If the kernel is compiled for z10 or later machines the uaccess
code inlines the mvcos instruction. The facility bit 27 which
indicates the availability of MVCOS has to be set. The have_mvcos
jump label will always be true.

Make the generation of the have_mvcos jump label conditional on
!CONFIG_HAVE_MARCH_Z10_FEATURES.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-08-29 16:29:10 +02:00
Martin Schwidefsky
8e58ab5c65 s390/mm: use generic mm_hooks
With git commit 3446c13b26
"s390/mm: four page table levels vs. fork"
s390 dropped its architecture specific version of arch_dup_mmap.

Now all functions defined by include/asm-generic/mm_hooks.h are
identical to the s390 versions. Use the generic header.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-08-29 16:29:09 +02:00
Heiko Carstens
ba7944114a s390/facilities: fix typo
There really is no "general extension" facility available. Use the
correct name "general instructions extension" facility instead.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-08-29 16:29:04 +02:00
Claudio Imbrenda
1bab1c02af KVM: s390: expose no-DAT to guest and migration support
The STFLE bit 147 indicates whether the ESSA no-DAT operation code is
valid, the bit is not normally provided to the host; the host is
instead provided with an SCLP bit that indicates whether guests can
support the feature.

This patch:
* enables the STFLE bit in the guest if the corresponding SCLP bit is
  present in the host.
* adds support for migrating the no-DAT bit in the PGSTEs
* fixes the software interpretation of the ESSA instruction that is
  used when migrating, both for the new operation code and for the old
  "set stable", as per specifications.

Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-08-29 15:15:56 +02:00
Heiko Carstens
631aebfee8 KVM: s390: sthyi: remove invalid guest write access
handle_sthyi() always writes to guest memory if the sthyi function
code is zero in order to fault in the page that later is written to.

However a function code of zero does not necessarily mean that a write
to guest memory happens: if the KVM host is running as a second level
guest under z/VM 6.2 the sthyi instruction is indicated to be
available to the KVM host, however if the instruction is executed it
will always return with a return code that indicates "unsupported
function code".

In such a case handle_sthyi() must not write to guest memory. This
means that the prior write access to fault in the guest page may
result in invalid guest exceptions, and/or invalid data modification.

In order to be architecture compliant simply remove the write_guest()
call.

Given that the guest assumed a write access anyway, this fix does not
qualify for -stable. This just makes sure the sthyi handler is
architecture compliant.

Fixes: 95ca2cb579 ("KVM: s390: Add sthyi emulation")
Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-08-29 15:15:56 +02:00
Collin L. Walling
8fa1696ea7 KVM: s390: Multiple Epoch Facility support
Allow for the enablement of MEF and the support for the extended
epoch in SIE and VSIE for the extended guest TOD-Clock.

A new interface is used for getting/setting a guest's extended TOD-Clock
that uses a single ioctl invocation, KVM_S390_VM_TOD_EXT.  Since the
host time is a moving target that might see an epoch switch or STP sync
checks we need an atomic ioctl and cannot use the exisiting two
interfaces. The old method of getting and setting the guest TOD-Clock is
still retained and is used when the old ioctls are called.

Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-08-29 15:15:54 +02:00
Jason J. Herne
b697e435ae KVM: s390: Support Configuration z/Architecture Mode
kvm has always supported the concept of starting in z/Arch mode so let's
reflect the feature bit to the guest.

Also, we change sigp set architecture to reject any request to change
architecture modes.

Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-08-28 16:25:13 +02:00
Christian Borntraeger
ccc59f47b6 KVM: s390: two fixes for sthyi emulation
- missing inline assembly constraint
 - wrong exception handling
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJZmuHdAAoJEBF7vIC1phx8dWEP/ilr5tP0+NZ57kmBGn/7/BpB
 toAqU20MRDaXj2mGfHBy5VCF5LU1acZGIor9M51KXaruXOcI/qIubze86tLvv5xI
 ts0RDwaQLrSysFrTAsn1b1DXeOzy65ZN7gvWlWab9Wq9gCdPjDerPsZ4gM3Q+vyH
 NrPnwAVvlkC9KeiqQWBSXBdEGd7saL/FU1h2r1wnFk05/b5h8ktl73JGN1uq6WBc
 c0RdElRQ+sa24NX1rI2qScuwfwoZMUiIuIzEvWXURaKSDN9hLR8RXTE1tf4BU+Ix
 jxyWej1MbA/kjGzW83xaeWansPyT6AgLZjdLsFnC+JDo1Qa0fnPntlBcCkrdkbd7
 oRYbj/VUJs4vkng0L/rlL3RbPt2K5UvaaoRDmaNqQAUJHopo+yQv4WsrOXA9nuuB
 cf74CLUpCwZiiGLonVAnVKlVRhUsj/DuzRdi6AB0DgCgf4iX36rHjBaFVzLuUWTU
 DasqpaGIX8vPJ4CiYTnJP4wAXvDwY19vrBA3CIgjlkF3JkDuBOcYLc7KXdif5azr
 +puBufI//NoV9xVX2cAxtn/ouKdH6LUwXhTkVjARQuz+nugiJ+FyHodWK/TCO0kz
 D51/+oR5BvwWxxXmxW7jwQvxenNbv95HNo60Z+Nzg2UbpqE1AYYt9PppJ0QU0P4k
 Z6+PYE2fcY127lOliLqy
 =Vvs+
 -----END PGP SIGNATURE-----

Merge tag 'kvm-s390-master-4.13-2' into kvms390/next

Additional fixes on top of these two
 - missing inline assembly constraint
 - wrong exception handling

are necessary
2017-08-28 13:46:32 +02:00
Jiri Slaby
30d6e0a419 futex: Remove duplicated code and fix undefined behaviour
There is code duplicated over all architecture's headers for
futex_atomic_op_inuser. Namely op decoding, access_ok check for uaddr,
and comparison of the result.

Remove this duplication and leave up to the arches only the needed
assembly which is now in arch_futex_atomic_op_inuser.

This effectively distributes the Will Deacon's arm64 fix for undefined
behaviour reported by UBSAN to all architectures. The fix was done in
commit 5f16a046f8 (arm64: futex: Fix undefined behaviour with
FUTEX_OP_OPARG_SHIFT usage). Look there for an example dump.

And as suggested by Thomas, check for negative oparg too, because it was
also reported to cause undefined behaviour report.

Note that s390 removed access_ok check in d12a29703 ("s390/uaccess:
remove pointless access_ok() checks") as access_ok there returns true.
We introduce it back to the helper for the sake of simplicity (it gets
optimized away anyway).

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> [s390]
Acked-by: Chris Metcalf <cmetcalf@mellanox.com> [for tile]
Reviewed-by: Darren Hart (VMware) <dvhart@infradead.org>
Reviewed-by: Will Deacon <will.deacon@arm.com> [core/arm64]
Cc: linux-mips@linux-mips.org
Cc: Rich Felker <dalias@libc.org>
Cc: linux-ia64@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Cc: peterz@infradead.org
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: sparclinux@vger.kernel.org
Cc: Jonas Bonn <jonas@southpole.se>
Cc: linux-s390@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: linux-hexagon@vger.kernel.org
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: linux-snps-arc@lists.infradead.org
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-xtensa@linux-xtensa.org
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: openrisc@lists.librecores.org
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Stafford Horne <shorne@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Richard Henderson <rth@twiddle.net>
Cc: Chris Zankel <chris@zankel.net>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-parisc@vger.kernel.org
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: linux-alpha@vger.kernel.org
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: "David S. Miller" <davem@davemloft.net>
Link: http://lkml.kernel.org/r/20170824073105.3901-1-jslaby@suse.cz
2017-08-25 22:49:59 +02:00
Dou Liyang
41b0dbfac0 s390/topology: Remove the unused parent_node() macro
Commit a7be6e5a7f ("mm: drop useless local parameters of
__register_one_node()") removes the last user of parent_node().

The parent_node() macro in S390 platform is unnecessary.

Remove it for cleanup.

Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-08-23 13:31:51 +02:00
Jan Höppner
7bf76f0169 s390/dasd: Change unsigned long long to unsigned long
Unsigned long long and unsigned long were different in size for 31-bit.
For 64-bit the size for both datatypes is 8 Bytes and since the support
for 31-bit is long gone we can clean up a little and change everything
to unsigned long.
Change get_phys_clock() along the way to accept unsigned long as well so
that the DASD code can be consistent.

Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-08-23 13:31:51 +02:00
Heiko Carstens
e1108e8f0d s390/smp: convert cpuhp_setup_state() return code to zero on success
cpuhp_setup_state() returns a state number on CPUHP_AP_ONLINE_DYN if
no error occurred. Therefore convert the return code to zero before
using it as exit code for s390_smp_init().

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-08-23 13:31:49 +02:00
Heiko Carstens
673cfddf6e s390: fix 'novx' early parameter handling
Specifying the 'novx' kernel parameter always results in a warning:

Malformed early option 'novx'

The reason for this is that the novx early parameter handling function
always returns a non-zero value which means that an error occurred.
Fix this and return the correct zero value instead.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-08-23 13:31:47 +02:00
Radim Krčmář
f2d8421b88 KVM: s390: two fixes for sthyi emulation
- missing inline assembly constraint
 - wrong exception handling
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJZmuHdAAoJEBF7vIC1phx8dWEP/ilr5tP0+NZ57kmBGn/7/BpB
 toAqU20MRDaXj2mGfHBy5VCF5LU1acZGIor9M51KXaruXOcI/qIubze86tLvv5xI
 ts0RDwaQLrSysFrTAsn1b1DXeOzy65ZN7gvWlWab9Wq9gCdPjDerPsZ4gM3Q+vyH
 NrPnwAVvlkC9KeiqQWBSXBdEGd7saL/FU1h2r1wnFk05/b5h8ktl73JGN1uq6WBc
 c0RdElRQ+sa24NX1rI2qScuwfwoZMUiIuIzEvWXURaKSDN9hLR8RXTE1tf4BU+Ix
 jxyWej1MbA/kjGzW83xaeWansPyT6AgLZjdLsFnC+JDo1Qa0fnPntlBcCkrdkbd7
 oRYbj/VUJs4vkng0L/rlL3RbPt2K5UvaaoRDmaNqQAUJHopo+yQv4WsrOXA9nuuB
 cf74CLUpCwZiiGLonVAnVKlVRhUsj/DuzRdi6AB0DgCgf4iX36rHjBaFVzLuUWTU
 DasqpaGIX8vPJ4CiYTnJP4wAXvDwY19vrBA3CIgjlkF3JkDuBOcYLc7KXdif5azr
 +puBufI//NoV9xVX2cAxtn/ouKdH6LUwXhTkVjARQuz+nugiJ+FyHodWK/TCO0kz
 D51/+oR5BvwWxxXmxW7jwQvxenNbv95HNo60Z+Nzg2UbpqE1AYYt9PppJ0QU0P4k
 Z6+PYE2fcY127lOliLqy
 =Vvs+
 -----END PGP SIGNATURE-----

Merge tag 'kvm-s390-master-4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux

KVM: s390: two fixes for sthyi emulation

- missing inline assembly constraint
- wrong exception handling
2017-08-21 18:21:30 +02:00
Heiko Carstens
857b8de967 KVM: s390: sthyi: fix specification exception detection
sthyi should only generate a specification exception if the function
code is zero and the response buffer is not on a 4k boundary.

The current code would also test for unknown function codes if the
response buffer, that is currently only defined for function code 0,
is not on a 4k boundary and incorrectly inject a specification
exception instead of returning with condition code 3 and return code 4
(unsupported function code).

Fix this by moving the boundary check.

Fixes: 95ca2cb579 ("KVM: s390: Add sthyi emulation")
Cc: <stable@vger.kernel.org> # 4.8+
Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-08-21 15:34:54 +02:00
Heiko Carstens
4a4eefcd0e KVM: s390: sthyi: fix sthyi inline assembly
The sthyi inline assembly misses register r3 within the clobber
list. The sthyi instruction will always write a return code to
register "R2+1", which in this case would be r3. Due to that we may
have register corruption and see host crashes or data corruption
depending on how gcc decided to allocate and use registers during
compile time.

Fixes: 95ca2cb579 ("KVM: s390: Add sthyi emulation")
Cc: <stable@vger.kernel.org> # 4.8+
Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-08-21 15:34:36 +02:00
Ingo Molnar
94edf6f3c2 Merge branch 'for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu
Pull RCU updates from Paul E. McKenney:

 - Removal of spin_unlock_wait()
 - SRCU updates
 - Torture-test updates
 - Documentation updates
 - Miscellaneous fixes
 - CPU-hotplug fixes
 - Miscellaneous non-RCU fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-21 09:45:19 +02:00
Paul E. McKenney
952111d7db arch: Remove spin_unlock_wait() arch-specific definitions
There is no agreed-upon definition of spin_unlock_wait()'s semantics,
and it appears that all callers could do just as well with a lock/unlock
pair.  This commit therefore removes the underlying arch-specific
arch_spin_unlock_wait() for all architectures providing them.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: <linux-arch@vger.kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Andrea Parri <parri.andrea@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Boqun Feng <boqun.feng@gmail.com>
2017-08-17 08:08:59 -07:00
David S. Miller
463910e2df Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2017-08-15 20:23:23 -07:00
Joerg Roedel
f42c223514 iommu/s390: Add support for iommu_device handling
Add support for the iommu_device_register interface to make
the s390 hardware iommus visible to the iommu core and in
sysfs.

Acked-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-08-15 18:22:45 +02:00
Minchan Kim
99baac21e4 mm: fix MADV_[FREE|DONTNEED] TLB flush miss problem
Nadav reported parallel MADV_DONTNEED on same range has a stale TLB
problem and Mel fixed it[1] and found same problem on MADV_FREE[2].

Quote from Mel Gorman:
 "The race in question is CPU 0 running madv_free and updating some PTEs
  while CPU 1 is also running madv_free and looking at the same PTEs.
  CPU 1 may have writable TLB entries for a page but fail the pte_dirty
  check (because CPU 0 has updated it already) and potentially fail to
  flush.

  Hence, when madv_free on CPU 1 returns, there are still potentially
  writable TLB entries and the underlying PTE is still present so that a
  subsequent write does not necessarily propagate the dirty bit to the
  underlying PTE any more. Reclaim at some unknown time at the future
  may then see that the PTE is still clean and discard the page even
  though a write has happened in the meantime. I think this is possible
  but I could have missed some protection in madv_free that prevents it
  happening."

This patch aims for solving both problems all at once and is ready for
other problem with KSM, MADV_FREE and soft-dirty story[3].

TLB batch API(tlb_[gather|finish]_mmu] uses [inc|dec]_tlb_flush_pending
and mmu_tlb_flush_pending so that when tlb_finish_mmu is called, we can
catch there are parallel threads going on.  In that case, forcefully,
flush TLB to prevent for user to access memory via stale TLB entry
although it fail to gather page table entry.

I confirmed this patch works with [4] test program Nadav gave so this
patch supersedes "mm: Always flush VMA ranges affected by zap_page_range
v2" in current mmotm.

NOTE:

This patch modifies arch-specific TLB gathering interface(x86, ia64,
s390, sh, um).  It seems most of architecture are straightforward but
s390 need to be careful because tlb_flush_mmu works only if
mm->context.flush_mm is set to non-zero which happens only a pte entry
really is cleared by ptep_get_and_clear and friends.  However, this
problem never changes the pte entries but need to flush to prevent
memory access from stale tlb.

[1] http://lkml.kernel.org/r/20170725101230.5v7gvnjmcnkzzql3@techsingularity.net
[2] http://lkml.kernel.org/r/20170725100722.2dxnmgypmwnrfawp@suse.de
[3] http://lkml.kernel.org/r/BD3A0EBE-ECF4-41D4-87FA-C755EA9AB6BD@gmail.com
[4] https://patchwork.kernel.org/patch/9861621/

[minchan@kernel.org: decrease tlb flush pending count in tlb_finish_mmu]
  Link: http://lkml.kernel.org/r/20170808080821.GA31730@bbox
Link: http://lkml.kernel.org/r/20170802000818.4760-7-namit@vmware.com
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Nadav Amit <namit@vmware.com>
Reported-by: Nadav Amit <namit@vmware.com>
Reported-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-10 15:54:07 -07:00
Minchan Kim
56236a5955 mm: refactor TLB gathering API
This patch is a preparatory patch for solving race problems caused by
TLB batch.  For that, we will increase/decrease TLB flush pending count
of mm_struct whenever tlb_[gather|finish]_mmu is called.

Before making it simple, this patch separates architecture specific part
and rename it to arch_tlb_[gather|finish]_mmu and generic part just
calls it.

It shouldn't change any behavior.

Link: http://lkml.kernel.org/r/20170802000818.4760-5-namit@vmware.com
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Nadav Amit <namit@vmware.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-10 15:54:07 -07:00
Daniel Borkmann
3b497806f6 bpf, s390x: implement jiting of BPF_J{LT, LE, SLT, SLE}
This work implements jiting of BPF_J{LT,LE,SLT,SLE} instructions
with BPF_X/BPF_K variants for the s390x eBPF JIT.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-09 16:53:57 -07:00
David S. Miller
3118e6e19d Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
The UDP offload conflict is dealt with by simply taking what is
in net-next where we have removed all of the UFO handling code
entirely.

The TCP conflict was a case of local variables in a function
being removed from both net and net-next.

In netvsc we had an assignment right next to where a missing
set of u64 stats sync object inits were added.

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-09 16:28:45 -07:00
Sebastian Ott
5db2317999 s390/pci: log changes to uid checking
Some hypervisors allow to toggle uid checking at runtime. Log
changes to uid checking in s390dbf.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-08-09 09:09:41 -04:00
Heiko Carstens
ef267938f0 s390/vmcp: split vmcp header file and move to uapi
Split the vmcp header file and move the device driver internal
structure to the C file, and move the ioctl definitions to the uapi
directory.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-08-09 09:09:36 -04:00
Heiko Carstens
3f4298427a s390/vmcp: make use of contiguous memory allocator
If memory is fragmented it is unlikely that large order memory
allocations succeed. This has been an issue with the vmcp device
driver since a long time, since it requires large physical contiguous
memory ares for large responses.

To hopefully resolve this issue make use of the contiguous memory
allocator (cma). This patch adds a vmcp specific vmcp cma area with a
default size of 4MB. The size can be changed either via the
VMCP_CMA_SIZE config option at compile time or with the "vmcp_cma"
kernel parameter (e.g. "vmcp_cma=16m").

For any vmcp response buffers larger than 16k memory from the cma area
will be allocated. If such an allocation fails, there is a fallback to
the buddy allocator.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-08-09 09:09:35 -04:00
Heiko Carstens
cd4386a931 s390/cpcmd,vmcp: avoid GFP_DMA allocations
According to the CP Programming Services manual Diagnose Code 8
"Virtual Console Function" can be used in all addressing modes. Also
the input and output buffers do not have a limitation which specifies
they need to be below the 2GB line.

This is true at least since z/VM 5.4.

Therefore remove the sam31/64 instructions and allow for simple
GFP_KERNEL allocations. This makes it easier to allocate a 1MB page
if the user requested such a large return buffer.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-08-09 09:09:35 -04:00
Heiko Carstens
34ad7cdc1b s390/mm: prevent memory offline for memory blocks with cma areas
Memory blocks that contain areas for the contiguous memory allocator
(cma) should not be allowed to go offline. Otherwise this would render
cma completely useless.
This might make sense on other architectures where memory might be
taken offline due to hardware errors, but not on architectures which
support memory hotplug for load balancing.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-08-09 09:09:28 -04:00
Heiko Carstens
16f4864171 s390/mm: add missing virt_to_pfn() etc. helper functions
Add all the missing little helper functions like virt_to_pfn(),
phys_to_page(), etc.  While we had a couple of these helper functions
like e.g. page_to_phys() the other functions were missing, which is
quite annoying if one is looking for exactly such a function.

Therefore finally add all those little helper functions.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-08-09 09:09:22 -04:00
Longpeng(Mike)
0546c63d98 KVM: s390: implements the kvm_arch_vcpu_in_kernel()
This implements kvm_arch_vcpu_in_kernel() for s390.  DIAG is a privileged
operation, so it cannot be called from problem state (user mode).

Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-08-08 10:57:43 +02:00
Longpeng(Mike)
199b5763d3 KVM: add spinlock optimization framework
If a vcpu exits due to request a user mode spinlock, then
the spinlock-holder may be preempted in user mode or kernel mode.
(Note that not all architectures trap spin loops in user mode,
only AMD x86 and ARM/ARM64 currently do).

But if a vcpu exits in kernel mode, then the holder must be
preempted in kernel mode, so we should choose a vcpu in kernel mode
as a more likely candidate for the lock holder.

This introduces kvm_arch_vcpu_in_kernel() to decide whether the
vcpu is in kernel-mode when it's preempted.  kvm_vcpu_on_spin's
new argument says the same of the spinning VCPU.

Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-08-08 10:57:43 +02:00
Daniel Borkmann
b0a0c2566f bpf, s390: fix jit branch offset related to ldimm64
While testing some other work that required JIT modifications, I
run into test_bpf causing a hang when JIT enabled on s390. The
problematic test case was the one from ddc665a4bb (bpf, arm64:
fix jit branch offset related to ldimm64), and turns out that we
do have a similar issue on s390 as well. In bpf_jit_prog() we
update next instruction address after returning from bpf_jit_insn()
with an insn_count. bpf_jit_insn() returns either -1 in case of
error (e.g. unsupported insn), 1 or 2. The latter is only the
case for ldimm64 due to spanning 2 insns, however, next address
is only set to i + 1 not taking actual insn_count into account,
thus fix is to use insn_count instead of 1. bpf_jit_enable in
mode 2 provides also disasm on s390:

Before fix:

  000003ff800349b6: a7f40003   brc     15,3ff800349bc                 ; target
  000003ff800349ba: 0000               unknown
  000003ff800349bc: e3b0f0700024       stg     %r11,112(%r15)
  000003ff800349c2: e3e0f0880024       stg     %r14,136(%r15)
  000003ff800349c8: 0db0               basr    %r11,%r0
  000003ff800349ca: c0ef00000000       llilf   %r14,0
  000003ff800349d0: e320b0360004       lg      %r2,54(%r11)
  000003ff800349d6: e330b03e0004       lg      %r3,62(%r11)
  000003ff800349dc: ec23ffeda065       clgrj   %r2,%r3,10,3ff800349b6 ; jmp
  000003ff800349e2: e3e0b0460004       lg      %r14,70(%r11)
  000003ff800349e8: e3e0b04e0004       lg      %r14,78(%r11)
  000003ff800349ee: b904002e   lgr     %r2,%r14
  000003ff800349f2: e3b0f0700004       lg      %r11,112(%r15)
  000003ff800349f8: e3e0f0880004       lg      %r14,136(%r15)
  000003ff800349fe: 07fe               bcr     15,%r14

After fix:

  000003ff80ef3db4: a7f40003   brc     15,3ff80ef3dba
  000003ff80ef3db8: 0000               unknown
  000003ff80ef3dba: e3b0f0700024       stg     %r11,112(%r15)
  000003ff80ef3dc0: e3e0f0880024       stg     %r14,136(%r15)
  000003ff80ef3dc6: 0db0               basr    %r11,%r0
  000003ff80ef3dc8: c0ef00000000       llilf   %r14,0
  000003ff80ef3dce: e320b0360004       lg      %r2,54(%r11)
  000003ff80ef3dd4: e330b03e0004       lg      %r3,62(%r11)
  000003ff80ef3dda: ec230006a065       clgrj   %r2,%r3,10,3ff80ef3de6 ; jmp
  000003ff80ef3de0: e3e0b0460004       lg      %r14,70(%r11)
  000003ff80ef3de6: e3e0b04e0004       lg      %r14,78(%r11)          ; target
  000003ff80ef3dec: b904002e   lgr     %r2,%r14
  000003ff80ef3df0: e3b0f0700004       lg      %r11,112(%r15)
  000003ff80ef3df6: e3e0f0880004       lg      %r14,136(%r15)
  000003ff80ef3dfc: 07fe               bcr     15,%r14

test_bpf.ko suite runs fine after the fix.

Fixes: 0546231057 ("s390/bpf: Add s390x eBPF JIT compiler backend")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-04 11:18:01 -07:00
Willem de Bruijn
76851d1212 sock: add SOCK_ZEROCOPY sockopt
The send call ignores unknown flags. Legacy applications may already
unwittingly pass MSG_ZEROCOPY. Continue to ignore this flag unless a
socket opts in to zerocopy.

Introduce socket option SO_ZEROCOPY to enable MSG_ZEROCOPY processing.
Processes can also query this socket option to detect kernel support
for the feature. Older kernels will return ENOPROTOOPT.

Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-03 21:37:29 -07:00
Heiko Carstens
83a8842438 s390: use generic asm/unaligned.h
And another header file for which we can use the generic variant,
even though it doesn't look obvious at first glance.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-08-03 13:16:28 +02:00
Heiko Carstens
3cb8f11c5d s390: use generic uapi/asm/swab.h
clang doesn't like s390 specific inline assembler constraints. These
are present in our arch specific uapi/asm/swab.h which again is
required by some ebpf test cases.

For current compiler versions the generic swab.h already makes use of
gcc's builtin functions. Therefore we can simply remove our own header
file and use the generic one.

This will generate worse code if used with compilers before gcc 4.8,
which has no __builtin_bswap16(); or before gcc v4.4, which has no
__builtin_bswap[32|64](). For these cases a C implementation fallback
would be used which generates more code, but is still correct (170KB
extra code for gcc 4.3 with performance_defconfig).

However given that we need (and want) to get rid of the inline
assemblies anyway in order to be able to use clang, the above is just
a minor drawback if old gcc compilers are used.

With current compilers there is close to zero difference, except for
three btrfs bit functions which generate more out-of-line code. The
generated code looks still correct and also uses the s390 specific
byteswap instructions.

Reported-and-tested-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-08-03 13:16:27 +02:00
Palmer Dabbelt
bccf90d6e0 PCI: Add a generic weak pcibios_fixup_bus()
Multiple architectures define this as an empty function, and I'm adding
another one as part of the RISC-V port.  Add a __weak version of
pcibios_fixup_bus() and delete the now-obselete ones in a handful of
ports.

The only functional change should be that microblaze used to export
pcibios_fixup_bus().  None of the other architectures exports this, so I
just dropped it.

Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-08-02 14:43:38 -05:00
Heiko Carstens
2edf3fa576 s390: remove asm/mman.h and asm/types.h
Both header files only include the corresponding uapi header file and
therefore can be removed.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-08-02 11:15:36 +02:00
Heiko Carstens
65a6d0c56c s390/nmi: keep comments consistent
The name of bit 36 of the machine check interruption code is "guarded
storage registers validity". Add the missing "validity" part in order
to be consistent with all other comments, which include this piece of
information.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-08-02 11:15:34 +02:00
Linus Torvalds
8155469341 s390: SRCU fix.
PPC: host crash fixes.
 x86: bugfixes, including making nested posted interrupts really work.
 Generic: tweaks to kvm_stat and to uevents
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJZe2EYAAoJEL/70l94x66D4JYH/AnvioKWTsplhUKt4Y4JlpJX
 EXYjQd/CIZ+MHNNUH+U+XEj6tKQymKrz4TeZSs1o0nyxCeyparR3gK27OYVpPspN
 GkPSit3hyRgW9r5uXp6pZCJuFCAMpMZ6z4sKbT1FxDhnWnpWayV9w8KA+yQT/UUX
 dNQ9JJPUxApcM4NCaj2OCQ8K1koNIDCc52+jATf0iK/Heiaf6UGqCcHXUIy5I5wM
 OWk05Qm32VBAYb6P6FfoyGdLMNAAkJtr1fyOJDkxX730CYgwpjIP0zifnJ1bt8V2
 YRnjvPO5QciDHbZ8VynwAkKi0ZAd8psjwXh0KbyahPL/2/sA2xCztMH25qweriI=
 =fsfr
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM fixes from Paolo Bonzini:
 "s390:
   - SRCU fix

  PPC:
   - host crash fixes

  x86:
   - bugfixes, including making nested posted interrupts really work

  Generic:
   - tweaks to kvm_stat and to uevents"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: LAPIC: Fix reentrancy issues with preempt notifiers
  tools/kvm_stat: add '-f help' to get the available event list
  tools/kvm_stat: use variables instead of hard paths in help output
  KVM: nVMX: Fix loss of L2's NMI blocking state
  KVM: nVMX: Fix posted intr delivery when vcpu is in guest mode
  x86: irq: Define a global vector for nested posted interrupts
  KVM: x86: do mask out upper bits of PAE CR3
  KVM: make pid available for uevents without debugfs
  KVM: s390: take srcu lock when getting/setting storage keys
  KVM: VMX: remove unused field
  KVM: PPC: Book3S HV: Fix host crash on changing HPT size
  KVM: PPC: Book3S HV: Enable TM before accessing TM registers
2017-07-28 13:36:56 -07:00
Paolo Bonzini
cb9083eb6e KVM: s390: fixup missing srcu lock
We need to hold the srcu lock when accessing memory slots
 during migration
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJZd0O1AAoJEBF7vIC1phx8WOIQAKLLmnqmKfD5sy3hIxkRUHG7
 WlN33M9tNCjDa1gL6iurBqKbOHt7phBhZdp/Kzuy/UxwPtM5vMaajQv1mLKl7b2y
 1GKEt2aTMJ3e/ql3Z3kVOASNguU2NHjVuzu+BObLhfzBXmNYp4hkyrMSkegb4Q2v
 j6Kfhpz/ltrzCYhL1/WYquKwG/aAV0fDefbfSrZZ0yx1TCnbtAEfbqBO6LXfys2t
 M3LW2OQwavV0YYrrwF4o7Seg0YfpQVYVH1j1/0dLd/Mb1w1D5/CB+gTr6zYhZ6z2
 MzZAa5ADRJ1y+YEoB6aB8T95/4i9Aw3fYhPYfw4ijUJcHUwSbzllSt2brIUSkEZo
 rajClCRjAMaMfeg2q5SZ6Mbg/wt5uo9O0hRG9weqZQR+NCnYkcrfgTe2kYSrorAs
 Msp6CUSfP9cOL9JETD+f3hEWl4uqA1P21n6Ga/v5ERPDxqIrqU49mlgjxBKRcPK4
 wHKaBrA4h53yOjNQ5U/Bdr130W2dQnRHmYAQXuUM9OjbBOliTbtgf8ND0U15S9TY
 HZomb3kEkL1o8J5rH6NBxxntoU48SEtuppBDSIAYBnp9h02F+RvNPqMr4orFHfD/
 OJe0zJHYobK44kz59DGmN5ed5wZl+Vzvdf7KAa62MotKmDMykbkWbcb9j+gcUFHf
 Yal+Mk51xCKPUcadGD/e
 =PjH2
 -----END PGP SIGNATURE-----

Merge tag 'kvm-s390-master-4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD

KVM: s390: fixup missing srcu lock

We need to hold the srcu lock when accessing memory slots
during migration

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-26 18:59:36 +02:00
Martin Schwidefsky
7f7e6e28cd s390/spinlock: add niai spinlock hints
The z14 machine introduces new mode of the next-instruction-access-intent
NIAI instruction. With NIAI-8 it is possible to pin a cache-line on a
CPU for a small amount of time, NIAI-7 releases the cache-line again.
Finally NIAI-4 can be used to prevent the CPU to speculatively access
memory beyond the compare-and-swap instruction to get the lock.

Use these instruction in the spinlock code.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-07-26 08:25:23 +02:00
Martin Schwidefsky
6997c32365 s390: add support for IBM z14 machines
Add detection for machine type 0x3906 and set the ELF platform name
to z14. Add the miscellaneous-instruction-extension 2 facility to
the list of facilities for z14.

And allow to generate code that only runs on a z14 machine.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-07-26 08:25:15 +02:00
Martin Schwidefsky
6e2ef5e4f6 s390/time: add support for the TOD clock epoch extension
The TOD epoch extension adds 8 epoch bits to the TOD clock to provide
a continuous clock after 2042/09/17. The store-clock-extended (STCKE)
instruction will store the epoch index in the first byte of the
16 bytes stored by the instruction. The read_boot_clock64 and the
read_presistent_clock64 functions need to take the additional bits
into account to give the correct result after 2042/09/17.

The clock-comparator register will stay 64 bit wide. The comparison
of the clock-comparator with the TOD clock is limited to bytes
1 to 8 of the extended TOD format. To deal with the overflow problem
due to an epoch change the clock-comparator sign control in CR0 can
be used to switch the comparison of the 64-bit TOD clock with the
clock-comparator to a signed comparison.

The decision between the signed vs. unsigned clock-comparator
comparisons is done at boot time. Only if the TOD clock is in the
second half of a 142 year epoch the signed comparison is used.
This solves the epoch overflow issue as long as the machine is
booted at least once in an epoch.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-07-26 08:25:14 +02:00
Heiko Carstens
a01ef3082d s390/mm,vmem: simplify region and segment table allocation code
Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-07-26 08:25:12 +02:00
Heiko Carstens
58cdf5eb13 KVM: s390: use new mm defines instead of magic values
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-07-26 08:25:10 +02:00
Heiko Carstens
f1c1174fa0 s390/mm: use new mm defines instead of magic values
Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-07-26 08:25:09 +02:00
Heiko Carstens
c67da7c7c5 s390/mm: introduce defines to reflect the hardware mmu
Add various defines like e.g. _REGION1_SHIFT to reflect the hardware
mmu. We have quite a bit code that does not make use of the Linux
memory management primitives but directly modifies page, segment and
region values.

Most of this is open-coded like e.g. "1UL << 53". In order to clean
this up introduce a couple of new defines. The existing Linux memory
management defines are changed, so the mapping to the hardware
implementation is reflected.

Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-07-26 08:25:08 +02:00
Heiko Carstens
a31a00ba7c s390/mm: get rid of __ASSEMBLY__ guards within pgtable.h
We have C code also outside of #ifndef __ASSEMBLY__. So these
guards seem to be quite pointless and can be removed.

Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-07-26 08:25:08 +02:00