checkpatch complains about source files with filenames (e.g. in
these cases just below the SPDX header in comments at the top of
various files in fs/cifs). It also is helpful to change this now
so will be less confusing when the parent directory is renamed
e.g. from fs/cifs to fs/smb_client (or fs/smbfs)
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Add SPDX license identifier and replace license boilerplate.
Corrects various checkpatch errors with the older format for
noting the LGPL license.
Signed-off-by: Steve French <stfrench@microsoft.com>
Needed for subsequent patches in the directory caching
series.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
These functions will eventually be used to cache any directory, not just the root
so change the names.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Move the check for the directory path into the open_shroot() function
but still fail for any non-root directories.
This is preparation for later when we will start using the cache also
for other directories than the root.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
In case of interrupted syscalls, prevent sending CLOSE commands for
compound CREATE+CLOSE requests by introducing an
CIFS_CP_CREATE_CLOSE_OP flag to indicate lower layers that it should
not send a CLOSE command to the MIDs corresponding the compound
CREATE+CLOSE request.
A simple reproducer:
#!/bin/bash
mount //server/share /mnt -o username=foo,password=***
tc qdisc add dev eth0 root netem delay 450ms
stat -f /mnt &>/dev/null & pid=$!
sleep 0.01
kill $pid
tc qdisc del dev eth0 root
umount /mnt
Before patch:
...
6 0.256893470 192.168.122.2 → 192.168.122.15 SMB2 402 Create Request File: ;GetInfo Request FS_INFO/FileFsFullSizeInformation;Close Request
7 0.257144491 192.168.122.15 → 192.168.122.2 SMB2 498 Create Response File: ;GetInfo Response;Close Response
9 0.260798209 192.168.122.2 → 192.168.122.15 SMB2 146 Close Request File:
10 0.260841089 192.168.122.15 → 192.168.122.2 SMB2 130 Close Response, Error: STATUS_FILE_CLOSED
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Add SYSTEM_SECURITY access flag and use with smb2 when opening
files for getting/setting SACLs. Add "system.cifs_ntsd_full"
extended attribute to allow user-space access to the functionality.
Avoid multiple server calls when setting owner, DACL, and SACL.
Signed-off-by: Boris Protopopov <pboris@amazon.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Cleanup patch for followon to cache additional information for the root directory
when directory lease held.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Add worker function for non-compounded SMB3.1.1 POSIX Extensions query info.
This is needed for revalidate of root (cached) directory for example.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Adds support for better query info on dentry revalidation (using
the SMB3.1.1 POSIX extensions level 100). Followon patch will
add support for translating the UID/GID from the SID and also
will add support for using the posix query info on lookup.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Move the channel (TCP_Server_Info*) selection from the tranport
layer to higher in the call stack so that:
- credit handling is done with the server that will actually be used
to send.
* ->wait_mtu_credit
* ->set_credits / set_credits
* ->add_credits / add_credits
* add_credits_and_wake_if
- potential reconnection (smb2_reconnect) done when initializing a
request is checked and done with the server that will actually be
used to send.
To do this:
- remove the cifs_pick_channel() call out of compound_send_recv()
- select channel and pass it down by adding a cifs_pick_channel(ses)
call in:
- smb311_posix_mkdir
- SMB2_open
- SMB2_ioctl
- __SMB2_close
- query_info
- SMB2_change_notify
- SMB2_flush
- smb2_async_readv (if none provided in context param)
- SMB2_read (if none provided in context param)
- smb2_async_writev (if none provided in context param)
- SMB2_write (if none provided in context param)
- SMB2_query_directory
- send_set_info
- SMB2_oplock_break
- SMB311_posix_qfs_info
- SMB2_QFS_info
- SMB2_QFS_attr
- smb2_lockv
- SMB2_lease_break
- smb2_compound_op
- smb2_set_ea
- smb2_ioctl_query_info
- smb2_query_dir_first
- smb2_query_info_comound
- smb2_query_symlink
- cifs_writepages
- cifs_write_from_iter
- cifs_send_async_read
- cifs_read
- cifs_readpages
- add TCP_Server_Info *server param argument to:
- cifs_send_recv
- compound_send_recv
- SMB2_open_init
- SMB2_query_info_init
- SMB2_set_info_init
- SMB2_close_init
- SMB2_ioctl_init
- smb2_iotcl_req_init
- SMB2_query_directory_init
- SMB2_notify_init
- SMB2_flush_init
- build_qfs_info_req
- smb2_hdr_assemble
- smb2_reconnect
- fill_small_buf
- smb2_plain_req_init
- __smb2_plain_req_init
The read/write codepath is different than the rest as it is using
pages, io iterators and async calls. To deal with those we add a
server pointer in the cifs_writedata/cifs_readdata/cifs_io_parms
context struct and set it in:
- cifs_writepages (wdata)
- cifs_write_from_iter (wdata)
- cifs_readpages (rdata)
- cifs_send_async_read (rdata)
The [rw]data->server pointer is eventually copied to
cifs_io_parms->server to pass it down to SMB2_read/SMB2_write.
If SMB2_read/SMB2_write is called from a different place that doesn't
set the server field it will pick a channel.
Some places do not pick a channel and just use ses->server or
cifs_ses_server(ses). All cifs_ses_server(ses) calls are in codepaths
involving negprot/sess.setup.
- SMB2_negotiate (binding channel)
- SMB2_sess_alloc_buffer (binding channel)
- SMB2_echo (uses provided one)
- SMB2_logoff (uses master)
- SMB2_tdis (uses master)
(list not exhaustive)
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CIFS uses pre-allocated crypto structures to calculate signatures for both
incoming and outgoing packets. In this way it doesn't need to allocate crypto
structures for every packet, but it requires a lock to prevent concurrent
access to crypto structures.
Remove the lock by allocating crypto structures on the fly for
incoming packets. At the same time, we can still use pre-allocated crypto
structures for outgoing packets, as they are already protected by transport
lock srv_mutex.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
allows SMB2_open() callers to pass down a POSIX data buffer that will
trigger requesting POSIX create context and parsing the response into
the provided buffer.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
* add new info level and structs for SMB2 posix extension
* add functions to parse and validate it
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When "backup intent" is requested on the mount (e.g. backupuid or
backupgid mount options), the corresponding flag was missing from
some of the operations.
Change all operations to use the macro cifs_create_options() to
set the backup intent flag if needed.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
SMB2_tdis() checks if a root handle is valid in order to decide
whether it needs to close the handle or not. However if another
thread has reference for the handle, it may end up with putting
the reference twice. The extra reference that we want to put
during the tree disconnect is the reference that has a directory
lease. So, track the fact that we have a directory lease and
close the handle only in that case.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Since timestamps on files on most servers can be updated at
close, and since timestamps on our dentries default to one
second we can have stale timestamps in some common cases
(e.g. open, write, close, stat, wait one second, stat - will
show different mtime for the first and second stat).
The SMB2/SMB3 protocol allows querying timestamps at close
so add the code to request timestamp and attr information
(which is cheap for the server to provide) to be returned
when a file is closed (it is not needed for the many
paths that call SMB2_close that are from compounded
query infos and close nor is it needed for some of
the cases where a directory close immediately follows a
directory open.
Signed-off-by: Steve French <stfrench@microsoft.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
close was relayered to allow passing in an async flag which
is no longer needed in this path. Remove the unneeded parameter
"flags" passed in on close.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
As we get down to the transport layer, plenty of functions are passed
the session pointer and assume the transport to use is ses->server.
Instead we modify those functions to pass (ses, server) so that we
can decouple the session from the server.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
If Close command is interrupted before sending a request
to the server the client ends up leaking an open file
handle. This wastes server resources and can potentially
block applications that try to remove the file or any
directory containing this file.
Fix this by putting the close command into a worker queue,
so another thread retries it later.
Cc: Stable <stable@vger.kernel.org>
Tested-by: Frank Sorenson <sorenson@redhat.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Now that sparse has been fixed, it spotted a couple recent minor
endian errors (and removed one additional sparse warning).
Thanks to Luc Van Oostenryck for his help fixing sparse.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
We need to populate an ACL (security descriptor open context)
on file and directory correct. This patch passes in the
mode. Followon patch will build the open context and the
security descriptor (from the mode) that goes in the open
context.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Create smb2_flush_init() and smb2_flush_free() so we can use the flush command
in compounds.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We can cut one third of the traffic on open by not querying the
inode number explicitly via SMB3 query_info since it is now
returned on open in the qfid context.
This is better in multiple ways, and
speeds up file open about 10% (more if network is slow).
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Some servers (see MS-SMB2 protocol specification
section 3.3.5.15.1) expect that the FSCTL enumerate snapshots
is done twice, with the first query having EXACTLY the minimum
size response buffer requested (16 bytes) which refreshes
the snapshot list (otherwise that and subsequent queries get
an empty list returned). So had to add code to set
the maximum response size differently for the first snapshot
query (which gets the size needed for the second query which
contains the actual list of snapshots).
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org> # 4.19+
Define an _init() and a _free() function for SMB2_init so that we will
be able to use it with compounds.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When we open the shared root handle also ask for FILE_ALL_INFORMATION since
we can do this at zero cost as part of a compound.
Cache this information as long as the lease is held and return and serve any
future requests from cache.
This allows us to serve "stat /<mountpoint>" directly from cache and avoid
a network roundtrip. Since clients often want to do this quite a lot
this improve performance slightly.
As an example: xfstest generic/533 performs 43 stat operations on the root
of the share while it is run. Which are eliminated with this patch.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
We can not append small padding buffers as separate iovs when encryption is
used. For this case we must flatten the request into a single buffer
containing both the data from all the iovs as well as the padding bytes.
This is at least needed for 4.20 as well due to compounding changes.
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reducing the number of network roundtrips improves the performance
of query xattrs
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Some servers require that the setinfo matches the exact size,
and in this case compounding changes introduced by
commit c2e0fe3f5a ("cifs: make rmdir() use compounding")
caused us to send 8 bytes (padded length) instead of 1 byte
(the size of the structure). See MS-FSCC section 2.4.11.
Fixing this when we send a SET_INFO command for delete file
disposition, then ends up as an iov of a single byte but this
causes problems with SMB3 and encryption.
To avoid this, instead of creating a one byte iov for the disposition value
and then appending an additional iov with a 7 byte padding we now handle
this as a single 8 byte iov containing both the disposition byte as well as
the padding in one single buffer.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Acked-by: Paulo Alcantara <palcantara@suse.de>
This allows userspace tools to query the raw info levels for cifs files
and process the response in userspace.
In particular this is useful for many of those data where there is no
corresponding native data structure in linux.
For example querying the security descriptor for a file and extract the
SIDs.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Get rid of smb2_open_op_close() as all operations are now migrated
to smb2_compound_op().
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We never pass is_falloc==true here anyway and if we ever need to support
is_falloc in the future, SMB2_set_eof is such a trivial wrapper around
send_set_info() that we can/should just create a differently named wrapper
for that new functionality.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Cuts number of network roundtrips significantly for some common syscalls
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
This and previous patches drop the number of roundtrips we need for rmdir()
from 6 to 2.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
so that we can use these later for compounded set-info calls.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
This turns most open/query-info/close patterns in cifs.ko
to become compounds.
This changes stat from using 3 roundtrips to just a single one.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Change smb2_queryfs() to use a Create/QueryInfo/Close compound request.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Cc: <stable@vger.kernel.org>
We really, really want to be encouraging use of secure dialects,
and SMB3.1.1 offers useful security features, and will soon
be the recommended dialect for many use cases. Simplify the code
by removing the CONFIG_CIFS_SMB311 ifdef so users don't disable
it in the build, and create compatibility and/or security issues
with modern servers - many of which have been supporting this
dialect for multiple years.
Also clarify some of the Kconfig text for cifs.ko about
SMB3.1.1 and current supported features in the module.
Signed-off-by: Steve French <stfrench@microsoft.com>
Acked-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Output now matches expected stat -f output for all fields
except for Namelen and ID which were addressed in a companion
patch (which retrieves them from existing SMB3 mechanisms
and works whether POSIX enabled or not)
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
SMB1 mounting broke in commit 35e2cc1ba7
("cifs: Use correct packet length in SMB2_TRANSFORM header")
Fix it and also rename smb2_rqst_len to smb_rqst_len
to make it less unobvious that the function is also called from
CIFS/SMB1
Good job by Paulo reviewing and cleaning up Ronnie's original patch.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
In smb3_init_transform_rq(), 'orig_len' was only counting the request
length, but forgot to count any data pages in the request.
Writing or creating files with the 'seal' mount option was broken.
In addition, do some code refactoring by exporting smb2_rqst_len() to
calculate the appropriate packet size and avoid duplicating the same
calculation all over the code.
The start of the io vector is either the rfc1002 length (4 bytes) or a
SMB2 header which is always > 4. Use this fact to check and skip the
rfc1002 length if requested.
Signed-off-by: Paulo Alcantara <palcantara@suse.de>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
