If we need to force a full plane update before userspace/fbdev
have given us a proper plane state we should try to maintain the
current plane state as much as possible (apart from the parts
of the state we're trying to fix up with the plane update).
To that end add basic readout for the plane rotation and
maintain it during the initial fb takeover.
Cc: Hans de Goede <hdegoede@redhat.com>
Fixes: 516a49cc19 ("drm/i915: Fix assert_plane() warning on bootup with external display")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181120135450.3634-2-ville.syrjala@linux.intel.com
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
(cherry picked from commit f43348a3db)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
If we force a plane update to fix up our half populated plane state
we'll also force on the pipe gamma for the plane (since we always
enable pipe gamma currently). If the BIOS hasn't programmed a sensible
LUT into the hardware this will cause the image to become corrupted.
Typical symptoms are a purple/yellow/etc. flash when the driver loads.
To avoid this let's program something sensible into the LUT when
we do the plane update. In the future I plan to add proper plane
gamma enable readout so this is just a temporary measure.
Cc: Hans de Goede <hdegoede@redhat.com>
Fixes: 516a49cc19 ("drm/i915: Fix assert_plane() warning on bootup with external display")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181120135450.3634-1-ville.syrjala@linux.intel.com
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit fa6af5145b)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
To get the initial phase correct we need to account for the scale
factor as well. I forgot this initially and was mostly looking at
heavily upscaled content where the minor difference between -0.5
and the proper initial phase was not readily apparent.
And let's toss in a comment that tries to explain the formula
a little bit.
v2: The initial phase upper limit is 1.5, not 24.0!
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: 0a59952b24 ("drm/i915: Configure SKL+ scaler initial phase correctly")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181029181820.21956-1-ville.syrjala@linux.intel.com
Tested-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Tested-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #irc
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #irc
(cherry picked from commit e7a278a329)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
We're no longer programming any watermarks when we're disabling
a pipe. That means ilk_wm_merge() & co. will keep considering
the any pipe that is getting disabled as still enabled. Thus we
either get no LP1+ watermakrs (ilk-ivb), or we get suboptimal
ones (hsw-bdw).
This seems to have been broken by commit b6b178a772 ("drm/i915:
Calculate ironlake intermediate watermarks correctly, v2."). Before
that we apparently had some difference between the intermediate
and optimal watermarks and so we would program the optiomal ones.
Now intermediate and optimal are identical for disabled pipes
and so we don't program either.
Fix this by programming the intermediate watermarks even for
disabled pipes. We were already doing that for skl+. We'll
leave out gmch platforms for now since those do the merging
in a different manner and should work as is. We'll want to
unify this eventually, but play it safe for now and just put
in a FIXME.
Cc: stable@vger.kernel.org
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: b6b178a772 ("drm/i915: Calculate ironlake intermediate watermarks correctly, v2.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181025130536.29024-1-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #irc
(cherry picked from commit a748faea3b)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Let's not leak obj->framebuffer_references when we decide that
the framebuffer domensions are not suitable for NV12.
Cc: stable@vger.kernel.org
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Vidya Srinivas <vidya.srinivas@intel.com>
Fixes: e44134f267 ("drm/i915: Add NV12 support to intel_framebuffer_init")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181029140031.11765-1-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit 3b90946fcb)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
This patch creates a function/wrapper to check if port is combophy port
instead of explicitly comparing ports.
Changes since V1:
- keep all intel_port_is_* helper together (Lucas)
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004085043.10154-1-mahesh1.kumar@intel.com
(cherry picked from commit 176597a12d)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
If BIOS configured a Y tiled FB we failed to set up the backing object
tiling accordingly, leading to a lack of GT fence installed and a
garbled console.
The problem was bisected to
commit 011f22eb54 ("drm/i915: Do NOT skip the first 4k of stolen memory for pre-allocated buffers v2")
but it just revealed a pre-existing issue.
Kudos to Ville who suspected a missing fence looking at the corruption
on the screen.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: <ronald@innovation.ch>
Cc: <stable@vger.kernel.org>
Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reported-by: <ronald@innovation.ch>
Tested-by: <ronald@innovation.ch>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108264
Fixes: bc8d7dffac ("drm/i915/skl: Provide a Skylake version of get_plane_config()")
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181016160011.28347-1-imre.deak@intel.com
(cherry picked from commit 914a4fd8cd)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
When we decide that a plane is attached to the wrong pipe we try
to turn off said plane. However we are passing around the crtc we
think that the plane is supposed to be using rather than the crtc
it is currently using. That doesn't work all that well because
we may have to do vblank waits etc. and the other pipe might
not even be enabled here. So let's pass the plane's current crtc to
intel_plane_disable_noatomic() so that it can its job correctly.
To do that semi-cleanly we also have to change the plane readout
to record the plane's visibility into the bitmasks of the crtc
where the plane is currently enabled rather than to the crtc
we want to use for the plane.
One caveat here is that our active_planes bitmask will get confused
if both planes are enabled on the same pipe. Fortunately we can use
plane_mask to reconstruct active_planes sufficiently since
plane_mask still has the same meaning (is the plane visible?)
during readout. We also have to do the same during the initial
plane readout as the second plane could clear the active_planes
bit the first plane had already set.
v2: Rely on fixup_active_planes() to populate active_planes fully (Daniel)
Add Daniel's proposed comment to better document why we do this
Drop the redundant intel_set_plane_visible() call
Cc: stable@vger.kernel.org # fcba862e8428 drm/i915: Have plane->get_hw_state() return the current pipe
Cc: stable@vger.kernel.org
Cc: Dennis <dennis.nezic@utoronto.ca>
Cc: Daniel Vetter <daniel@ffwll.ch>
Tested-by: Dennis <dennis.nezic@utoronto.ca>
Tested-by: Peter Nowee <peter.nowee@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105637
Fixes: b1e01595a6 ("drm/i915: Redo plane sanitation during readout")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181003145017.4527-1-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit 62358aa4ee)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Plane sanitation needs vblank interrupts (on account of CxSR disable).
So let's restore vblank interrupts earlier.
v2: Make it actually build
v3: Add comment to explain why we need this (Daniel)
Cc: stable@vger.kernel.org
Cc: Dennis <dennis.nezic@utoronto.ca>
Tested-by: Dennis <dennis.nezic@utoronto.ca>
Tested-by: Peter Nowee <peter.nowee@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105637
Fixes: b1e01595a6 ("drm/i915: Redo plane sanitation during readout")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181003144951.4397-1-ville.syrjala@linux.intel.com
(cherry picked from commit 68bc30deac)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
commit 4e0b83a567 ("drm/i915: Extract per-platform plane->check()
functions") removed the plane max stride check for sprite planes.
I was going to add it back when introducing GTT remapping for the
display, but after further thought it seems better to re-introduce
it separately.
So let's add the max stride check back. And let's do it in a nicer
form than what we had before and do it for all plane types (easy
now that we have the ->max_stride() plane vfunc).
Only sprite planes really need this for now since primary planes
are capable of scanning out the current max fb size we allow, and
cursors have more stringent stride checks elsewhere.
Cc: José Roberto de Souza <jose.souza@intel.com>
Fixes: 4e0b83a567 ("drm/i915: Extract per-platform plane->check() functions")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180918140243.12207-1-ville.syrjala@linux.intel.com
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
(cherry picked from commit fc3fed5d29)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Driver Changes:
- Bugzilla 107600: Fix stuttering video playback on MythTV on old hardware (Chris)
- Avoid black screen when using CSC coefficient matrix (Raviraj)
- Hammer PDs on Baytrail to make sure they reload (Chris)
- Capture some objects if unable to capture all, on error (Chris)
- Add W/A for 16 GB DIMMs on SKL+ (Mahesh)
- Only enable IPC for symmetric memory configurations on KBL+ (Mahesh)
- Assume pipe A to have maximum stride limits (Ville)
- Always update update OA contexts via context image (Tvrtko)
- Icelake enabling patches (Madhav, Dhinakaran)
- Add Icelake DMC firmware (Anusha)
- Fixes for CI found corner cases (Chris)
- Limit the backpressure for request allocation (Chris)
- Park GPU on module load so usage starts from known state (Chris)
- Flush tasklet when checking for idle (Chris)
- Use coherent write into the context image on BSW+ (Chris)
- Fix possible integer overflow for framebuffers that get aligned past 4GiB (Ville)
- Downgrade fence timeout from warn to notice and add debug hint (Chris)
- Fixes to multi function encoder code (Ville)
- Fix sprite plane check logic (Dan, Ville)
- PAGE_SIZE vs. I915_GTT_PAGE_SIZE fixes (Ville)
- Decode memory bandwidth and parameters for BXT and SKL+ (Mahesh)
- Overwrite BIOS set IPC value from KMS (Mahesh)
- Multiple pipe handling code cleanups/restructurings/optimizations (Ville)
- Spare low 4G address for non-48bit objects (Chris)
- Free context_setparam of struct_mutex (Chris)
- Delay updating ring register state on resume (Chris)
- Avoid unnecessarily copying overlay IOCTL parameters (Chris)
- Update GuC power domain states even without submission (Michal)
- Restore GuC preempt-context across S3/S4 (Chris)
- Add kernel selftest for rapid context switching (Chris)
- Keep runtime power management ref for live selftests (Chris)
- GEM code cleanups (Matt)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180927095933.GA11458@jlahtine-desk.ger.corp.intel.com
UAPI Changes:
- None
Cross-subsystem Changes:
- None
Core Changes:
- Allow drivers to disable features with per-device granularity (Ville)
- Use EOPNOTSUPP when iface/feature is unsupported instead of
EINVAL/errno soup (Chris)
- Simplify M/N DP quirk by using constant N to limit size of M/N (Shawn)
- add quirk for LG LP140WF6-SPM1 eDP panel (Shawn)
Driver Changes:
- i915/amdgpu: Disable DRIVER_ATOMIC for older/unsupported devices (Ville)
- sun4i: add support for R40 HDMI PHY (Icenowy)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Icenowy Zheng <icenowy@aosc.io>
Cc: Lee, Shawn C <shawn.c.lee@intel.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEfxcpfMSgdnQMs+QqlvcN/ahKBwoFAluiqZAACgkQlvcN/ahK
BwrD7gf+O9hI1+sWAKs9/D2xz5G0Ap/wTUtPZprVx+UMg833T4E3q5esSTvlKd5q
QdijWWFZ3Eu7osQB5QTvCHpJ1F1Q9DScYdD5rd0WRhZBGnBd2guFziFRhleXpQH1
CTo/xjS4Y1l1wEildvZdjPaDfXE0Q+uK8kl11AIVoYQvW6V28/pwCW+mmfMfQG4D
lC9Lj5iPTDGLmbT3DZcH9ZUU8CZreJVPDn+mi8XsAOGt55YlCphl5XsOabNRzpCh
5VYZbauJqrlfa3/cbVuFpTqjqR5XRlMvzgdYH2Wa+9JreiReNCDs3CVL4YnLWe0p
PIfE6ZC2ucX831aZOodV7KtwtLYc/Q==
=oPPq
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2018-09-19' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 4.20:
UAPI Changes:
- None
Cross-subsystem Changes:
- None
Core Changes:
- Allow drivers to disable features with per-device granularity (Ville)
- Use EOPNOTSUPP when iface/feature is unsupported instead of
EINVAL/errno soup (Chris)
- Simplify M/N DP quirk by using constant N to limit size of M/N (Shawn)
- add quirk for LG LP140WF6-SPM1 eDP panel (Shawn)
Driver Changes:
- i915/amdgpu: Disable DRIVER_ATOMIC for older/unsupported devices (Ville)
- sun4i: add support for R40 HDMI PHY (Icenowy)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Icenowy Zheng <icenowy@aosc.io>
Cc: Lee, Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20180919200218.GA186644@art_vandelay
Some DP dongles in particular seem to be fussy about too large
link M/N values. Set specific value for N divider can resolve
this issue per dongle vendor's comment. So configure N as
constant value (0x8000) to instead of reduce M/N formula when
specific DP dongle connected.
v2: add more comments for issue description and fix typo.
v3: add lost commit messages back for version 2
v4: send patch to both intel-gfx and dri-devel
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Cooper Chiou <cooper.chiou@intel.com>
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Tested-by: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Lee, Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1536733371-25004-3-git-send-email-shawn.c.lee@intel.com
UAPI Changes:
- Add host endian variants for the most common formats (Gerd)
- Fail ADDFB2 for big-endian drivers that don't advertise BE quirk (Gerd)
- clear smem_start in fbdev for drm drivers to avoid leaking fb addr (Daniel)
Cross-subsystem Changes:
Core Changes:
- fix drm_mode_addfb() on big endian machines (Gerd)
- add timeline point to syncobj find+replace (Chunming)
- more drmP.h removal effort (Daniel)
- split uapi portions of drm_atomic.c into drm_atomic_uapi.c (Daniel)
Driver Changes:
- bochs: Convert open-coded portions to use helpers (Peter)
- vkms: Add cursor support (Haneen)
- udmabuf: Lots of fixups (mostly cosmetic afaict) (Gerd)
- qxl: Convert to use fbdev helper (Peter)
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Chunming Zhou <david1.zhou@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Peter Wu <peter@lekensteyn.nl>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEfxcpfMSgdnQMs+QqlvcN/ahKBwoFAluaXuAACgkQlvcN/ahK
BwrQHggAtcu96+plN6cDcMcoOfnQT/OG30dBER4/cpG05hEciq/NXwXBQ9dPWtqk
Nkcgst28UbXTmt0UKck7ibfePLVqnN7+yRqnj3yrD28Qjrg1Ewr0go8cKlIJ8+8t
E6aLvgRwx5/9sHHaeCC1K1qfowEr0Put9DQvLH2BVRM3C1Sj5BXeXMP4djb5PHGU
BYGLoN9DrrVHLVARwbmzSb8V5oLED2CdRkL7WpXC2LcEGZ3jPllTN8EOoqsIMOAZ
LGnpWxADVnYTA5np3O0QJsalu942T4rMPoxgCHZmuGIhEijqk7mgGWpeOmzN71Eh
rXX1yyWvZenUc69Pbl7G7lQmE6DSDw==
=9Mxt
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2018-09-13' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 4.20:
UAPI Changes:
- Add host endian variants for the most common formats (Gerd)
- Fail ADDFB2 for big-endian drivers that don't advertise BE quirk (Gerd)
- clear smem_start in fbdev for drm drivers to avoid leaking fb addr (Daniel)
Cross-subsystem Changes:
Core Changes:
- fix drm_mode_addfb() on big endian machines (Gerd)
- add timeline point to syncobj find+replace (Chunming)
- more drmP.h removal effort (Daniel)
- split uapi portions of drm_atomic.c into drm_atomic_uapi.c (Daniel)
Driver Changes:
- bochs: Convert open-coded portions to use helpers (Peter)
- vkms: Add cursor support (Haneen)
- udmabuf: Lots of fixups (mostly cosmetic afaict) (Gerd)
- qxl: Convert to use fbdev helper (Peter)
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Chunming Zhou <david1.zhou@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Peter Wu <peter@lekensteyn.nl>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20180913130254.GA156437@art_vandelay
If we have framebuffers that are >= 4GiB in size we will overflow
the fb size check in intel_fill_fb_info().
Currently that is only possible with NV12 and CCS as offsets[1]
may be anything between 0 and 0xffffffff. offsets[0] is currently
required to be 0 so we can't hit the overflow with any single
plane format (thanks to max fb size of 8kx8k and max stride of
32 KiB).
In the future we may allow almost any framebuffer to exceed 4GiB
in size so we really should fix the overflow. Not that the overflow
is particularly dangerous. It's mostly just a sanity check against
insane userspace. The display engine can't write to memory anyway
so I suppose in the worst case we might anger the hw by attempting
scanout past the end of the ggtt, or we might scan out some data
that we're not supposed to see from other parts of the ggtt.
Note that triggering this overflow depends on the driver
aligning the fb height to the next tile boundary to push the
calculated size above 4GiB. With linear buffers the effective
tile height is one so that never happens, and the core already
has a check for 32bit overflow of offsets[]+pitches[]*height.
v2: Drop the unnecessary cast (Chris)
Testcase: igt/kms_big_fb/x-tiled-addfb-size-offset-overflow
Testcase: igt/kms_big_fb/y-tiled-addfb-size-offset-overflow
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180912180443.28649-1-ville.syrjala@linux.intel.com
Move the display w/a #1175 to a better place. That place
being the new skl+ specific plane->check() hook. This leaves
the skl_check_plane_surface() stuff to deal with the gtt offset
and src coordinate stuff as originally envisioned.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180907152413.15761-12-ville.syrjala@linux.intel.com
Move the skl+ specific framebuffer related checks from
intel_plane_atomic_check_with_state() into a new function
(skl_plane_check_fb()) which we'll simply call from the skl
plane->check() hook.
v2: Split out the Y/Yf+CCS vs. interlaced change (José)
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180907152413.15761-11-ville.syrjala@linux.intel.com
Split up intel_check_primary_plane() and intel_check_sprite_plane()
into per-platform variants. This way we can get a unified behaviour
between the SKL universal planes, and we stop checking for non-SKL
specific scaling limits for the "sprite" planes. And we now get
a natural place where to add more plarform specific checks.
v2: Split the .check_plane() calling convention change out (José)
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180907152413.15761-10-ville.syrjala@linux.intel.com
We can easily calculate the plane can_scale/min_downscale on demand.
And later on we'll probably want to start calculating these dynamically
based on the cdclk just as skl already does.
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180907152413.15761-9-ville.syrjala@linux.intel.com
Let's store the final plane stride in the plane state. This avoids
having to pick between the normal vs. rotated stride during hardware
programming. And once we get GTT remapping the plane stride will
no longer match the fb stride so we'll need a place to store it
anyway.
v2: Keep checking fb->pitches[0] for cursor as later on we won't
populate plane_state->color_plane[0].stride for invisible planes
and we have been checking the cursor fb stride even for invisible
planes
v3: s/betwen/between in commit msg (José)
v4: Check color_plane[0].stride instead of fb->pitches[0] in
the skl_check_main_surface() X-tiling kludge
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180911150139.23922-1-ville.syrjala@linux.intel.com
Each plane may have different stride limitations. Let's add a new
plane function to retutn the maximum stride for each plane. There's
going to be some use for this outside the .atomic_check() stuff hence
the separate hook.
v2: Fix ilk+ x-tiled max stride to be 32k (José)
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180907152413.15761-3-ville.syrjala@linux.intel.com
Rename some of the tile_offset() functions to aligned_offset() since
they operate on both linear and tiled functions. And we'll include
_plane_ in the name of all the variants that take a plane state.
Should make it more clear which function to use where.
v2: Pimp the patch subject a bit (José)
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180907152413.15761-2-ville.syrjala@linux.intel.com
During modeset, previously configured csc coefficient matrix,if any, will
not persist. This can result in blank screen as csc mode will be programmed
while loading LUT but csc coefficient matrix remains unprogrammed.
Changes since V1:
- Removed platform check
Signed-off-by: P Raviraj Sitaram <raviraj.p.sitaram@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1536589634-29680-1-git-send-email-raviraj.p.sitaram@intel.com
Merge tag 'gvt-next-2018-09-04'
drm-intel-next-2018-09-06-1:
UAPI Changes:
- GGTT coherency GETPARAM: GGTT has turned out to be non-coherent for some
platforms, which we've failed to communicate to userspace so far. SNA was
modified to do extra flushing on non-coherent GGTT access, while Mesa will
mitigate by always requiring WC mapping (which is non-coherent anyway).
- Neuter Resource Streamer uAPI: There never really were users for the feature,
so neuter it while keeping the interface bits for compatibility. This is a
long due item from past.
Cross-subsystem Changes:
- Backmerge of branch drm-next-4.19 for DP_DPCD_REV_14 changes
Core Changes:
- None
Driver Changes:
- A load of Icelake (ICL) enabling patches (Paulo, Manasi)
- Enabled full PPGTT for IVB,VLV and HSW (Chris)
- Bugzilla #107113: Distribute DDB based on display resolutions (Mahesh)
- Bugzillas #100023,#107476,#94921: Support limited range DP displays (Jani)
- Bugzilla #107503: Increase LSPCON timeout (Fredrik)
- Avoid boosting GPU due to an occasional stall in interactive workloads (Chris)
- Apply GGTT coherency W/A only for affected systems instead of all (Chris)
- Fix for infinite link training loop for faulty USB-C MST hubs (Nathan)
- Keep KMS functional on Gen4 and earlier when GPU is wedged (Chris)
- Stop holding ppGTT reference from closed VMAs (Chris)
- Clear error registers after error capture (Lionel)
- Various Icelake fixes (Anusha, Jyoti, Ville, Tvrtko)
- Add missing Coffeelake (CFL) PCI IDs (Rodrigo)
- Flush execlists tasklet directly from reset-finish (Chris)
- Fix LPE audio runtime PM (Chris)
- Fix detection of out of range surface positions (GLK/CNL) (Ville)
- Remove wait-for-idle for PSR2 (Dhinakaran)
- Power down existing display hardware resources when display is disabled (Chris)
- Don't allow runtime power management if RC6 doesn't exist (Chris)
- Add debugging checks for runtime power management paths (Imre)
- Increase symmetry in display power init/fini paths (Imre)
- Isolate GVT specific macros from i915_reg.h (Lucas)
- Increase symmetry in power management enable/disable paths (Chris)
- Increase IP disable timeout to 100 ms to avoid DRM_ERROR (Imre)
- Fix memory leak from HDMI HDCP write function (Brian, Rodrigo)
- Reject Y/Yf tiling on interlaced modes (Ville)
- Use a cached mapping for the physical HWS on older gens (Chris)
- Force slow path of writing relocations to buffer if unable to write to userspace (Chris)
- Do a full device reset after being wedged (Chris)
- Keep forcewake counts over reset (in case of debugfs user) (Imre, Chris)
- Avoid false-positive errors from power wells during init (Imre)
- Reset engines forcibly in exchange of declaring whole device wedged (Mika)
- Reduce context HW ID lifetime in preparation for Icelake (Chris)
- Attempt to recover from module load failures (Chris)
- Keep select interrupts over a reset to avoid missing/losing them (Chris)
- GuC submission backend improvements (Jakub)
- Terminate context images with BB_END (Chris, Lionel)
- Make GCC evaluate GGTT view struct size assertions again (Ville)
- Add selftest to exercise suspend/hibernate code-paths for GEM (Chris)
- Use a full emulation of a user ppgtt context in selftests (Chris)
- Exercise resetting in the middle of a wait-on-fence in selftests (Chris)
- Fix coherency issues on selftests for Baytrail (Chris)
- Various other GEM fixes / self-test updates (Chris, Matt)
- GuC doorbell self-tests (Daniele)
- PSR mode control through debugfs for IGTs (Maarten)
- Degrade expected WM latency errors to DRM_DEBUG_KMS (Chris)
- Cope with errors better in MST link training (Dhinakaran)
- Fix WARN on KBL external displays (Azhar)
- Power well code cleanups (Imre)
- Fixes to PSR debugging (Dhinakaran)
- Make forcewake errors louder for easier catching in CI (WARNs) (Chris)
- Fortify tiling code against programmer errors (Chris)
- Bunch of fixes for CI exposed corner cases (multiple authors, mostly Chris)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180907105446.GA22860@jlahtine-desk.ger.corp.intel.com
This leaves all the commit/check and state handling in drm_atomic.c,
while pulling all the uapi glue and the huge ioctl itself into a
seprate file.
This seems to almost perfectly split the rather big drm_atomic.c file
into 2 equal sizes.
Also adjust the kerneldoc and type a very terse overview text.
v2: Rebase.
v3: Fix tiny typo.
v4:
- Fixup armada, newly converted atomic driver hooray!
- Fixup msm/dpu1, newly added too.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: intel-gfx@lists.freedesktop.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180905135711.28370-7-daniel.vetter@ffwll.ch
The optimisation inherent in commit 6a2c4232ec ("drm/i915: Make the
physical object coherent with GTT") relies on that once we allocated a
cursor we would have coherent, zero overhead access to the scanout plane
holding the cursor. That is we could then do the very frequent cursor
updates X enjoys with no indirection or kernel involvement. However,
that all hinges on the GGTT mmap of the cursor being pinned and not
require refaulting on each access -- handling such a page fault likely
requires the busy GGTT to be rearranged causing a stall. A very simple
fix is then to handle the physical cursor exactly like other cursors and
keep its vma pinned while active.
References: https://bugs.freedesktop.org/show_bug.cgi?id=107600
References: 6a2c4232ec ("drm/i915: Make the physical object coherent with GTT")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180817082405.755-1-chris@chris-wilson.co.uk
The workaround was supposed to look at the plane destination
coordinates. Currently it's looking at some mixture of src
and dst coordinates that doesn't make sense. Fix it up.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180719182214.4323-2-ville.syrjala@linux.intel.com
Fixes: 394676f05b (drm/i915: Add WA for planes ending close to left screen edge)
Reviewed-by: Imre Deak <imre.deak@intel.com>
(cherry picked from commit b1f1c2c11f)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
ICL requires two planes for scanning out a NV12 framebuffer. Do
not advertize support for creating NV12 framebuffers until required
plane programming is implemented.
v2: Do not allow adding buffers.
Check inside skl_plane_has_planar (Ville)
Bspec: Plane Planar YUV programming (18566)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180824203856.17700-2-dhinakaran.pandiyan@intel.com
skl_plane_has_planar is hard to read, simplify the logic by checking for
support in the order of platform, pipe and plane.
No change in functionality intended.
v2: Fix logic for primary plane (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180827225624.4912-1-dhinakaran.pandiyan@intel.com
.check_plane() already gets the plane state, so we can dig out the plane
from there if needed. No need in passing it separately.
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180828142707.31583-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
The workaround was supposed to look at the plane destination
coordinates. Currently it's looking at some mixture of src
and dst coordinates that doesn't make sense. Fix it up.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180719182214.4323-2-ville.syrjala@linux.intel.com
Fixes: 394676f05b (drm/i915: Add WA for planes ending close to left screen edge)
Reviewed-by: Imre Deak <imre.deak@intel.com>
After
commit 2cd9a689e9 ("drm/i915: Refactor intel_display_set_init_power() logic")
it makes more sense to check the power domain/well refcounts after
enabling the power domains functionality. Before that it's guaranteed
that most power wells (in the INIT domain) will have a reference held,
so not an interesting state.
While at it also add the check after the init_hw/fini_hw, disable and
suspend/resume steps. Make the test optional on a Kconfig option since
it may add substantial overhead: on VLV/CHV the corresponding PUNIT reg
access for each power well may take up to 20ms.
v2:
- Add the state check to more spots. (Chris)
v3:
- During suspend check the state before deiniting display core.
Afterwards DC states are disabled (and so the dc_off power well is
enabled) even though we don't hold a reference on it.
- Do the test conditionally based on a new Kconfig option. (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
[Add DRM_I915_DEBUG_RUNTIME_PM to welcome messages]
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180817145837.26592-1-imre.deak@intel.com
The device global init_power_on flag is somewhat arbitrary and makes
debugging power refcounting problems difficult. Instead arrange things
so that all display power domain get has a corresponding put call. After
this change we have the following sequences:
driver loading:
intel_power_domains_init_hw();
<other init steps>
intel_power_domains_enable();
driver unloading:
intel_power_domains_disable();
<other uninit steps>
intel_power_domains_fini_hw();
system suspend:
intel_power_domains_disable();
<other suspend steps>
intel_power_domains_suspend();
system resume:
intel_power_domains_resume();
<other resume steps>
intel_power_domains_enable();
at other times while the driver is loaded:
intel_display_power_get();
...
intel_display_power_put();
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180816123757.3286-2-imre.deak@intel.com
We require that we keep the list of outstanding work short so that we do
not "leak" memory while pageflipping under stress. However that system
stress may delay kernel workers virtually indefinitely, which incurs the
pageflips stall and eventually hit a timeout waiting for the cleanup.
Try to combat CPU starvation of our short-lived cleanup workers by
switching to a high priority workqueue.
Testcase: igt/kms_cursor_legacy/all-pipes-torture-move
References: https://bugs.freedesktop.org/show_bug.cgi?id=107122
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180712115729.3506-1-chris@chris-wilson.co.uk
This patch implements get_crc_sources callback, which returns list of
all the valid crc sources supported by driver in current platform.
Changes since V1:
- Return array of crc sources
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180713135942.25061-8-mahesh1.kumar@intel.com
