A CI system might want to run all tests in verbose mode so that there is
enough information to diagnose issues. This LLVM test is the only test
that uses "-v" to signify to not skip the test if the preconditions
aren't met (LLVM isn't installed). This means that running the test in
verbose mode without LLVM installed causes a test failure.
For consistency with the other tests, remove this verbose/skip check. An
alternate solution would be to make _all_ tests not skip when run in
verbose mode, but I don't think that would be intuitive.
Also change the search_program() call to search_program_and_warn().
Previously the hint about installing LLVM was only printed by the actual
test because this check was skipped in verbose mode. To maintain the old
behaviour, the precondition check must also print the full warning.
Previous output:
$ ./perf test llvm
40: LLVM search and compile :
40.1: Basic BPF llvm compile : Skip
$ ./perf test -v llvm
40: LLVM search and compile :
40.1: Basic BPF llvm compile :
--- start ---
test child forked, pid 2085835
ERROR: unable to find clang.
Hint: Try to install latest clang/llvm to support BPF. Check your $PATH
...
test child finished with -1
---- end ----
LLVM search and compile subtest 1: FAILED!
New output (non verbose mode is identical, verbose changes from fail to
skip):
$ ./perf test llvm
40: LLVM search and compile :
40.1: Basic BPF llvm compile : Skip
$ ./perf test -v llvm
40: LLVM search and compile :
40.1: Basic BPF llvm compile :
--- start ---
test child forked, pid 2087680
ERROR: unable to find clang.
Hint: Try to install latest clang/llvm to support BPF. Check your $PATH
...
No clang, skip this test
test child finished with -2
---- end ----
LLVM search and compile subtest 1: Skip
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: clang-built-linux@googlegroups.com
Link: http://lore.kernel.org/lkml/20210831145501.2135754-2-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The same warning is duplicated in two places so refactor it into a
single function "search_program_and_warn". This will be used a third
time in a later commit.
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: clang-built-linux@googlegroups.com
Link: http://lore.kernel.org/lkml/20210831145501.2135754-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When the tool runs with compat mode on Arm platform, the kernel is in
64-bit mode and user space is in 32-bit mode; the user space can use
instructions "ldrd" and "strd" for 64-bit value atomicity.
This patch adds compat_auxtrace_mmap__{read_head|write_tail} for arm
building, it uses "ldrd" and "strd" instructions to ensure accessing
atomicity for aux head and tail. The file arch/arm/util/auxtrace.c is
built for arm and arm64 building, these two functions are not needed for
arm64, so check the compiler macro "__arm__" to only include them for
arm building.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: James Clark <james.clark@arm.com>
Tested-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Russell King (oracle)" <linux@armlinux.org.uk>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/20210829102238.19693-3-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When perf runs in compat mode (kernel in 64-bit mode and the perf is in
32-bit mode), the 64-bit value atomicity in the user space cannot be
assured, E.g. on some architectures, the 64-bit value accessing is split
into two instructions, one is for the low 32-bit word accessing and
another is for the high 32-bit word.
This patch introduces weak functions compat_auxtrace_mmap__read_head()
and compat_auxtrace_mmap__write_tail(), as their naming indicates, when
perf tool works in compat mode, it uses these two functions to access
the AUX head and tail. These two functions can allow the perf tool to
work properly in certain conditions, e.g. when perf tool works in
snapshot mode with only using AUX head pointer, or perf tool uses the
AUX buffer and the incremented tail is not bigger than 4GB.
When perf tool cannot handle the case when the AUX tail is bigger than
4GB, the function compat_auxtrace_mmap__write_tail() returns -1 and
tells the caller to bail out for the error.
These two functions are declared as weak attribute, this allows to
implement arch specific functions if any arch can support the 64-bit
value atomicity in compat mode.
Suggested-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Russell King (oracle)" <linux@armlinux.org.uk>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/20210829102238.19693-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
BTF needs to be freed with btf__free().
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210826184833.408563-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There is currently only 1 'perf data' command, but supporting extra
commands was breaking the help output. Simplify for now so that the help
output is correct.
Before:
$ perf data -h
Usage: perf data [<common options>] <command> [<options>]
$ perf data
Usage:
perf data [<common options>] <command> [<options>]
Available commands:
convert - converts data file between formats
After:
$ perf data
Usage: perf data convert [<options>]
-f, --force don't complain, do it
-i, --input <file> input file name
-v, --verbose be more verbose
--all Convert all events
--to-ctf ... Convert to CTF format
--to-json ... Convert to JSON format
--tod Convert time to wall clock time
$ perf data -h
Usage: perf data convert [<options>]
-f, --force don't complain, do it
-i, --input <file> input file name
-v, --verbose be more verbose
--all Convert all events
--to-ctf ... Convert to CTF format
--to-json ... Convert to JSON format
--tod Convert time to wall clock time
Signed-off-by: Joshua Martinez <joshuamart@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210824205829.52822-1-irogers@google.com
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There is a spelling mistake in a warning message. Fix it.
Signed-off-by: Colin King <colin.king@canonical.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-janitors@vger.kernel.org
Link: http://lore.kernel.org/lkml/20210826121801.13281-1-colin.king@canonical.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Such as cross building on Android, so just add EXTRA_CFLAGS to the
dlfilters rules as it is where --sysroot= has been specified.
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/YS1JwIMTNNWcbGdT@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
* display perf.data header
* display PIDs of user stacks
* added option to change color scheme
* default to blue/green color scheme to improve accessibility
* correctly identify kernel stacks when kernel-debuginfo is installed
Signed-off-by: Andreas Gerstmayr <agerstmayr@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210830164729.116049-1-agerstmayr@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stephane found that the name of the forked process in a system-wide
mode is wrong when --delay option is used. For example,
# perf record -a --delay=1000 noploop 3
The noploop process will run a busy loop for 3 second. And on an idle
machine it should show up at the top in the perf report. It works
well without the --delay option. But if I add the option, it showed
'perf' not 'noploop'.
# perf report -s comm -q | head -3
52.94% perf
16.65% swapper
12.04% chrome
It turned out that the dummy event didn't work at all and it missed
COMM and MMAP events for the noploop process (and others too). We
should enable the dummy event immediately in system-wide mode, as the
enable-on-exec would work only for task events.
With this change,
# perf report -s comm -q | head -3
52.75% noploop
17.03% swapper
12.83% chrome
Reported-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210827233212.3121037-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The cgroup mode should work with cpu events. Warn if --for-each-cgroup
option is used with a task target like existing -G option.
# perf stat --for-each-cgroup . sleep 1
both cgroup and no-aggregation modes only available in system-wide mode
Usage: perf stat [<options>] [<command>]
-G, --cgroup <name> monitor event in cgroup name only
-A, --no-aggr disable CPU count aggregation
-a, --all-cpus system-wide collection from all CPUs
--for-each-cgroup <name>
expand events for each cgroup
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210830170200.55652-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
73 9.00 ubuntu:18.04-x-powerpc : FAIL gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04)
bench/evlist-open-close.c: In function 'bench_evlist_open_close__run':
bench/evlist-open-close.c:173:12: error: format '%ld' expects argument of type 'long int', but argument 5 has type 'u64 {aka long long unsigned int}' [-Werror=format=]
pr_debug("Iteration %d took:\t%ldus\n", i, runtime_us);
^
bench/../util/debug.h:18:21: note: in definition of macro 'pr_fmt'
#define pr_fmt(fmt) fmt
^~~
bench/evlist-open-close.c:173:3: note: in expansion of macro 'pr_debug'
pr_debug("Iteration %d took:\t%ldus\n", i, runtime_us);
^~~~~~~~
cc1: all warnings being treated as errors
/git/perf-5.14.0/tools/build/Makefile.build:139: recipe for target 'bench' failed
Cc: Riccardo Mancini <rickyman7@gmail.com>
Fixes: 4241eabf59 ("perf bench: Add benchmark for evlist open/close operations")
Link: http://lore.kernel.org/lkml/YS0oTcA9Zuy8Wjm9@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The commit 4d6101f5fd ("perf probe: Clarify error message about
not finding kernel modules debuginfo") changed the error message "Failed
to find the path for kernel" to "Failed to find the path for the
kernel".
Update the regex so that the tests still skip rather than fail when
kernel debug symbols aren't present.
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: http://lore.kernel.org/lkml/20210825164259.833222-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The build on fedora:35 and fedora:rawhide with clang is failing with:
49 41.00 fedora:35 : FAIL clang version 13.0.0 (Fedora 13.0.0~rc1-1.fc35)
bench/inject-buildid.c:351:6: error: variable 'len' set but not used [-Werror,-Wunused-but-set-variable]
u64 len = 0;
^
1 error generated.
make[3]: *** [/git/perf-5.14.0-rc7/tools/build/Makefile.build:139: bench] Error 2
50 41.11 fedora:rawhide : FAIL clang version 13.0.0 (Fedora 13.0.0~rc1-1.fc35)
bench/inject-buildid.c:351:6: error: variable 'len' set but not used [-Werror,-Wunused-but-set-variable]
u64 len = 0;
^
1 error generated.
make[3]: *** [/git/perf-5.14.0-rc7/tools/build/Makefile.build:139: bench] Error 2
That 'len' variable is not used at all, so just make sure all the
synthesize_RECORD() routines return ssize_t to propagate the writen()
return, as it may fail, ditch the 'ret' var and bail out if those
routines fail.
Fixes: 0bf02a0d80 ("perf bench: Add build-id injection benchmark")
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/CAM9d7cgEZNSor+B+7Y2C+QYGme_v5aH0Zn0RLfxoQ+Fy83EHrg@mail.gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acaict, perf_home_perfconfig() is supposed to cache the result of
home_perfconfig, which returns the default location of perfconfig for
the user, given the HOME environment variable.
However, the current implementation calls home_perfconfig every time
perf_home_perfconfig() is called (so no caching is actually performed),
replacing the previous pointer, thus also causing a memory leak.
This patch adds a check of whether either config or failed is set and,
in that case, directly returns config without calling home_perfconfig at
each invocation.
Fixes: f5f03e19ce ("perf config: Add perf_home_perfconfig function")
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Link: http://lore.kernel.org/lkml/20210820130817.740536-1-rickyman7@gmail.com
[ Removed needless double check for the 'failed' variable ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
strdup() prototype doesn't live in stdlib.h .
Add limits.h for PATH_MAX definition as well.
This fixes the build on Android.
Signed-off-by: Alexey Dobriyan (SK hynix) <adobriyan@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/YRukaQbrgDWhiwGr@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
libperf's verbose printing checks the -v option every time the macro _T_ START
is called.
Since there are currently four libperf tests registered, the macro _T_ START is
called four times, but verbose printing after the second time is not output.
Resets the index of the element processed by getopt() and fix verbose printing
so that it prints in all tests.
Signed-off-by: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Acked-by: Rob Herring <robh@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210820093908.734503-3-nakamura.shun@fujitsu.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add missing newline at the end of file parse-sublevel-options.h.
Thus removing relevant warning reported by checkpatch.
Signed-off-by: Nghia Le <nghialm78@gmail.com>
Reviewed-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http //lore.kernel.org/lkml/20210824085947.224062-1-nghialm78@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In dlfilter-test.c, check_filter_desc() calls get_filter_desc() which
allocates 'desc' and 'long_desc'. However, these variables are never
deallocated.
This patch adds the missing free() calls.
Fixes: 9f9c9a8de2 ("perf tests: Add dlfilter test")
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210820113132.724034-1-rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
mac80211 trees.
Current release - regressions:
- tipc: call tipc_wait_for_connect only when dlen is not 0
- mac80211: fix locking in ieee80211_restart_work()
Current release - new code bugs:
- bpf: add rcu_read_lock in bpf_get_current_[ancestor_]cgroup_id()
- ethernet: ice: fix perout start time rounding
- wwan: iosm: prevent underflow in ipc_chnl_cfg_get()
Previous releases - regressions:
- bpf: clear zext_dst of dead insns
- sch_cake: fix srchost/dsthost hashing mode
- vrf: reset skb conntrack connection on VRF rcv
- net/rds: dma_map_sg is entitled to merge entries
Previous releases - always broken:
- ethernet: bnxt: fix Tx path locking and races, add Rx path barriers
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmEepAYACgkQMUZtbf5S
IrugdhAAo6/T9A8MmxU711gwq9BKcubOr2BQC0GYGjhM6Pnhign44kDGdBbl1fmL
lt4LTgOwIKZ4bpLYJuwXnq0KpwWG8YKpgdgjvXsc0jXYtDHJvFjzL42vjGGGvAc4
rwIe784dNt3LYppEsADAad2ZdQO25tB+jhQO8MttipNGq8Qvkjib2ttvmLri/hEl
hKRHnyQMEZCXbMV4zn+ILjlqLxZ5a2ZPk97qGL9fAafi1O3cjfv5ZDwvOjM3TGE3
DPLdEvYFRDTECGJO3QOK7SzC1NoQA49Bj1hqwbWRUi9tm8A0lPXEUjNleCbC2i7n
qi6JBexmme6ZiimJJPeKacn8BcgorPDWm6friL9jiWpndvrWycBmqw5LurgdLVHC
nFHjnbji885P6DBZLx8tDbTSXGSpcLoHuv7M3aQbD2DZqQKk/9irKaJMUZ6XwOYm
EXM6oqQ13vaSjFH1GOsK0wx/XjcL5t42uRAtG9INlYusaU+ZvFu12TzEt1+PcWpO
nF7VUQWQatcidSYdYolciw383siKRiSV1F8d6IEon907GHVrod9ty+yii33CamBf
/aUyFULMEf/vaXjmJzhzWABV9vu3QVWd0IxL9oqbbRqNTwFr86hnnRhntqUCje/c
vY0VFWQ4CuaTvohKl0I+IhyvUPLUp1iTD51qSbOSKybG6IZ77+U=
=ofv+
-----END PGP SIGNATURE-----
Merge tag 'net-5.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes, including fixes from bpf, wireless and mac80211
trees.
Current release - regressions:
- tipc: call tipc_wait_for_connect only when dlen is not 0
- mac80211: fix locking in ieee80211_restart_work()
Current release - new code bugs:
- bpf: add rcu_read_lock in bpf_get_current_[ancestor_]cgroup_id()
- ethernet: ice: fix perout start time rounding
- wwan: iosm: prevent underflow in ipc_chnl_cfg_get()
Previous releases - regressions:
- bpf: clear zext_dst of dead insns
- sch_cake: fix srchost/dsthost hashing mode
- vrf: reset skb conntrack connection on VRF rcv
- net/rds: dma_map_sg is entitled to merge entries
Previous releases - always broken:
- ethernet: bnxt: fix Tx path locking and races, add Rx path
barriers"
* tag 'net-5.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (42 commits)
net: dpaa2-switch: disable the control interface on error path
Revert "flow_offload: action should not be NULL when it is referenced"
iavf: Fix ping is lost after untrusted VF had tried to change MAC
i40e: Fix ATR queue selection
r8152: fix the maximum number of PLA bp for RTL8153C
r8152: fix writing USB_BP2_EN
mptcp: full fully established support after ADD_ADDR
mptcp: fix memory leak on address flush
net/rds: dma_map_sg is entitled to merge entries
net: mscc: ocelot: allow forwarding from bridge ports to the tag_8021q CPU port
net: asix: fix uninit value bugs
ovs: clear skb->tstamp in forwarding path
net: mdio-mux: Handle -EPROBE_DEFER correctly
net: mdio-mux: Don't ignore memory allocation errors
net: mdio-mux: Delete unnecessary devm_kfree
net: dsa: sja1105: fix use-after-free after calling of_find_compatible_node, or worse
sch_cake: fix srchost/dsthost hashing mode
ixgbe, xsk: clean up the resources in ixgbe_xsk_pool_enable error path
net: qlcnic: add missed unlock in qlcnic_83xx_flash_read32
mac80211: fix locking in ieee80211_restart_work()
...
This patch copies sparse context/locking annotations from
include/compiler-types.h to tools/include/compiler-types.h.
Committer notes:
This will be used in the upcoming workqueue patchset.
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http //lore.kernel.org/lkml/58b2f161ce856ec8b499f4dcf60a10adc84651e0.1627657061.git.rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fixes in virtio,vhost,vdpa drivers.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmEZ7l0PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpdoQH/ir3ycgBco4pgDlpo0EQzw1eqwuyT69L7fvE
hlEZOqYOE39WvRTbFZLdrk4RQsULuu4x1vBr9AZ/qV2kHIHUlIGkuNqXnJiihsZE
bHGzKV7XGuzwRFXzCEmzTCDo6SFICVpqN9sb+tKMEsb/qiANi22OuDuDqffHldOH
wYmw6BaHPdj+w1+w6PYW8R/M0A9yaI7HngfBxt9OiVCYXNK2QQDiUWOsAaxmshSt
wsTDSwz4T6rRn/chztWC4JxlpossWJ7zywJexPKW02PSBqOV+z6irPkr7Ku3MhJ7
T2OjLzSSub1R+ikuQikZWKY67mvr45fnWFglUsPtO7H4f6biDeA=
=06n4
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio fixes from Michael Tsirkin:
"Fixes in virtio, vhost, and vdpa drivers"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vdpa/mlx5: Fix queue type selection logic
vdpa/mlx5: Avoid destroying MR on empty iotlb
tools/virtio: fix build
virtio_ring: pull in spinlock header
vringh: pull in spinlock header
virtio-blk: Add validation for block size in config space
vringh: Use wiov->used to check for read/write desc order
virtio_vdpa: reject invalid vq indices
vdpa: Add documentation for vdpa_alloc_device() macro
vDPA/ifcvf: Fix return value check for vdpa_alloc_device()
vp_vdpa: Fix return value check for vdpa_alloc_device()
vdpa_sim: Fix return value check for vdpa_alloc_device()
vhost: Fix the calculation in vhost_overflow()
vhost-vdpa: Fix integer overflow in vhost_vdpa_process_iotlb_update()
virtio_pci: Support surprise removal of virtio pci device
virtio: Protect vqs list access
virtio: Keep vring_del_virtqueue() mirror of VQ create
virtio: Improve vq->broken access to avoid any compiler optimization
- Fix support for NFIT "virtual" ranges (BIOS-defined memory disks)
- Fix recovery from failed label storage areas on NVDIMM devices
- Miscellaneous cleanups from Ira's investigation of dax_direct_access
paths preparing for stray-write protection.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCYRhC0wAKCRDfioYZHlFs
Z6InAQD+duS9GS5DnnFInmRDj/rMRQFVB4X25mmSlViYOR0gNwEAtJQP03CGAp+G
+DP7/nu2HrIhx8Ng8vTsu8ZnO8ge7Qw=
=zmii
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-fixes-5.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:
"A couple of fixes for long standing bugs, a warning fixup, and some
miscellaneous dax cleanups.
The bugs were recently found due to new platforms looking to use the
ACPI NFIT "virtual" device definition, and new error injection
capabilities to trigger error responses to label area requests. Ira's
cleanups have been long pending, I neglected to send them earlier, and
see no harm in including them now. This has all appeared in -next with
no reported issues.
Summary:
- Fix support for NFIT "virtual" ranges (BIOS-defined memory disks)
- Fix recovery from failed label storage areas on NVDIMM devices
- Miscellaneous cleanups from Ira's investigation of
dax_direct_access paths preparing for stray-write protection"
* tag 'libnvdimm-fixes-5.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
tools/testing/nvdimm: Fix missing 'fallthrough' warning
libnvdimm/region: Fix label activation vs errors
ACPI: NFIT: Fix support for virtual SPA ranges
dax: Ensure errno is returned from dax_direct_access
fs/dax: Clarify nr_pages to dax_direct_access()
fs/fuse: Remove unneeded kaddr parameter
This Kselftest fixes update for Linux 5.14-rc6 consists of a single patch
to sgx test to fix Q1 and Q2 calculation.
-----BEGIN PGP SIGNATURE-----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=wKY6
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-fixes-5.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fix from Shuah Khan:
"A single patch to sgx test to fix Q1 and Q2 calculation"
* tag 'linux-kselftest-fixes-5.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/sgx: Fix Q1 and Q2 calculation in sigstruct.c
-----BEGIN PGP SIGNATURE-----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=lx8b
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.14-2021-08-13' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"A bit bigger than the previous weeks, but mostly just a few stable
bound fixes. In detail:
- Followup fixes to patches from last week for io-wq, turns out they
weren't complete (Hao)
- Two lockdep reported fixes out of the RT camp (me)
- Sync the io_uring-cp example with liburing, as a few bug fixes
never made it to the kernel carried version (me)
- SQPOLL related TIF_NOTIFY_SIGNAL fix (Nadav)
- Use WRITE_ONCE() when writing sq flags (Nadav)
- io_rsrc_put_work() deadlock fix (Pavel)"
* tag 'io_uring-5.14-2021-08-13' of git://git.kernel.dk/linux-block:
tools/io_uring/io_uring-cp: sync with liburing example
io_uring: fix ctx-exit io_rsrc_put_work() deadlock
io_uring: drop ctx->uring_lock before flushing work item
io-wq: fix IO_WORKER_F_FIXED issue in create_io_worker()
io-wq: fix bug of creating io-wokers unconditionally
io_uring: rsrc ref lock needs to be IRQ safe
io_uring: Use WRITE_ONCE() when writing to sq_flags
io_uring: clear TIF_NOTIFY_SIGNAL when running task work
Prevent regressions related to zero-extension metadata handling during
dead code sanitization.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210812151811.184086-3-iii@linux.ibm.com
This example is missing a few fixes that are in the liburing version,
synchronize with the upstream version.
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The overhead can vary on each run so it'd make the test failed
sometimes. Also order of hist entry can change.
Use perf report -F option to omit the overhead field and sort the
result alphabetically.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20210812235738.1684583-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'perf record' and 'perf stat' commands have supported the option
'-C/--cpus' to count or collect only on the list of CPUs provided. This
option needs to be supported for hybrid as well.
For hybrid support, it needs to check that the cpu list are available
on hybrid PMU. One example for AlderLake, cpu0-7 is 'cpu_core', cpu8-11
is 'cpu_atom'.
Before:
# perf stat -e cpu_core/cycles/ -C11 -- sleep 1
Performance counter stats for 'CPU(s) 11':
<not supported> cpu_core/cycles/
1.006179431 seconds time elapsed
The 'perf stat' command silently returned "<not supported>" without any
helpful information. It should error out pointing out that that cpu11
was not 'cpu_core'.
After:
# perf stat -e cpu_core/cycles/ -C11 -- sleep 1
WARNING: 11 isn't a 'cpu_core', please use a CPU list in the 'cpu_core' range (0-7)
failed to use cpu list 11
We also need to support the events without pmu prefix specified.
# perf stat -e cycles -C11 -- sleep 1
WARNING: 11 isn't a 'cpu_core', please use a CPU list in the 'cpu_core' range (0-7)
Performance counter stats for 'CPU(s) 11':
1,067,373 cpu_atom/cycles/
1.005544738 seconds time elapsed
The perf tool creates two cycles events automatically, cpu_core/cycles/ and
cpu_atom/cycles/. It checks that cpu11 is not 'cpu_core', then shows a warning
for cpu_core/cycles/ and only count the cpu_atom/cycles/.
If part of cpus are 'cpu_core' and part of cpus are 'cpu_atom', for example,
# perf stat -e cycles -C0,11 -- sleep 1
WARNING: use 0 in 'cpu_core' for 'cycles', skip other cpus in list.
WARNING: use 11 in 'cpu_atom' for 'cycles', skip other cpus in list.
Performance counter stats for 'CPU(s) 0,11':
1,914,704 cpu_core/cycles/
2,036,983 cpu_atom/cycles/
1.005815641 seconds time elapsed
It now automatically selects cpu0 for cpu_core/cycles/, selects cpu11 for
cpu_atom/cycles/, and output with some warnings.
Some more complex examples,
# perf stat -e cycles,instructions -C0,11 -- sleep 1
WARNING: use 0 in 'cpu_core' for 'cycles', skip other cpus in list.
WARNING: use 11 in 'cpu_atom' for 'cycles', skip other cpus in list.
WARNING: use 0 in 'cpu_core' for 'instructions', skip other cpus in list.
WARNING: use 11 in 'cpu_atom' for 'instructions', skip other cpus in list.
Performance counter stats for 'CPU(s) 0,11':
2,780,387 cpu_core/cycles/
1,583,432 cpu_atom/cycles/
3,957,277 cpu_core/instructions/
1,167,089 cpu_atom/instructions/
1.006005124 seconds time elapsed
# perf stat -e cycles,cpu_atom/instructions/ -C0,11 -- sleep 1
WARNING: use 0 in 'cpu_core' for 'cycles', skip other cpus in list.
WARNING: use 11 in 'cpu_atom' for 'cycles', skip other cpus in list.
WARNING: use 11 in 'cpu_atom' for 'cpu_atom/instructions/', skip other cpus in list.
Performance counter stats for 'CPU(s) 0,11':
3,290,301 cpu_core/cycles/
1,953,073 cpu_atom/cycles/
1,407,869 cpu_atom/instructions/
1.006260912 seconds time elapsed
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https //lore.kernel.org/r/20210723063433.7318-4-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The user may count or collect only on a cpu list via '-C/--cpus' option.
Previously cpus for an evsel were retrieved from PMU's sysfs. But if the
target cpu list is defined, the retrieved cpus are not kept and the
target cpu list is used instead.
But for hybrid system, we can't directly use target cpu list. The cpu
list may not be available on hybrid pmu (e.g. cpu_core or cpu_atom). So
we should not set the 'has_user_cpus' flag for hybrid system.
The difficulity is that we can't call perf_pmu__has_hybrid() in evlist.c
to check hybrid system otherwise 'perf test python' would be failed
(undefined symbol for perf_pmu__has_hybrid). If we add pmu.c to
python-ext-sources, too many symbol dependencies are hard to resolve.
We use an alternative method by using a new 'hybrid' flag in target
for hybrid system checking.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https //lore.kernel.org/r/20210723063433.7318-3-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
libperf already has a static function called 'cpu_map__default_new()'.
Add a new API perf_cpu_map__default_new() to export the function.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https //lore.kernel.org/r/20210723063433.7318-2-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use "fallthrough;" to address:
tools/testing/nvdimm/test/nfit.c: In function ‘nd_intel_test_finish_query’:
tools/testing/nvdimm/test/nfit.c:436:37: warning: this statement may
fall through [-Wimplicit-fallthrough=]
436 | fw->missed_activate = false;
| ~~~~~~~~~~~~~~~~~~~~^~~~~~~
tools/testing/nvdimm/test/nfit.c:438:9: note: here
438 | case FW_STATE_UPDATED:
| ^~~~
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Link: https://lore.kernel.org/r/162767522046.3313209.14767278726893995797.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
perf-test has the option --skip to provide a list of tests to skip.
However, this option does not work with shell scripts.
This patch passes the skiplist to run_shell_tests, so that also shell
scripts could be skipped using --skip.
Committer tests:
Tests 79 onwards are shell tests:
Before:
# perf test --skip 1,2,81,82,84,88,90
1: vmlinux symtab matches kallsyms : Skip (user override)
2: Detect openat syscall event : Skip (user override)
3: Detect openat syscall event on all cpus : Ok
4: Read samples using the mmap interface : Ok
5: Test data source output : Ok
<SNIP>
78: x86 Sample parsing : Ok
79: build id cache operations : Ok
80: daemon operations : Ok
81: perf pipe recording and injection test : Ok
82: Add vfs_getname probe to get syscall args filenames : FAILED!
83: probe libc's inet_pton & backtrace it with ping : Ok
84: Use vfs_getname probe to get syscall args filenames : FAILED!
85: Zstd perf.data compression/decompression : Ok
86: perf stat csv summary test : Ok
87: perf stat metrics (shadow stat) test : Ok
88: perf stat --bpf-counters test : Ok
89: Check Arm CoreSight trace data recording and synthesized samples: Skip
90: Check open filename arg using perf trace + vfs_getname : FAILED!
#
After:
# perf test --skip 1,2,81,82,84,88,90
1: vmlinux symtab matches kallsyms : Skip (user override)
2: Detect openat syscall event : Skip (user override)
3: Detect openat syscall event on all cpus : Ok
4: Read samples using the mmap interface : Ok
5: Test data source output : Ok
<SNIP>
78: x86 Sample parsing : Ok
79: build id cache operations : Ok
80: daemon operations : Ok
81: perf pipe recording and injection test : Skip (user override)
82: Add vfs_getname probe to get syscall args filenames : Skip (user override)
83: probe libc's inet_pton & backtrace it with ping : Ok
84: Use vfs_getname probe to get syscall args filenames : Skip (user override)
85: Zstd perf.data compression/decompression : Ok
86: perf stat csv summary test : Ok
87: perf stat metrics (shadow stat) test : Ok
88: perf stat --bpf-counters test : Skip (user override)
89: Check Arm CoreSight trace data recording and synthesized samples: Skip
90: Check open filename arg using perf trace + vfs_getname : Skip (user override)
#
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210811180625.160944-1-rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a perf test to test the dlfilter C API.
A perf.data file is synthesized and then processed by perf script with a
dlfilter named dlfilter-test-api-v0.so. Also a C file is compiled to
provide a dso to match the synthesized perf.data file.
Committer testing:
[root@five ~]# perf test dlfilter
72: dlfilter C API : Ok
[root@five ~]# perf test -v dlfilter
72: dlfilter C API :
--- start ---
test child forked, pid 3387712
Checking for gcc
Command: gcc --version
gcc (GCC) 11.1.1 20210531 (Red Hat 11.1.1-3)
Copyright (C) 2021 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
dlfilters path: /var/home/acme/libexec/perf-core/dlfilters
Command: gcc -g -o /tmp/dlfilter-test-3387712-prog /tmp/dlfilter-test-3387712-prog.c
Creating new host machine structure
Command: /var/home/acme/bin/perf script -i /tmp/dlfilter-test-3387712-perf-data --dlfilter /var/home/acme/libexec/perf-core/dlfilters/dlfilter-test-api-v0.so --dlarg first --dlarg 1 --dlarg 4198669 --dlarg 4198662 --dlarg 0 --dlarg last
start API
filter_event_early API
filter_event API
stop API
Command: /var/home/acme/bin/perf script -i /tmp/dlfilter-test-3387712-perf-data --dlfilter /var/home/acme/libexec/perf-core/dlfilters/dlfilter-test-api-v0.so --dlarg first --dlarg 1 --dlarg 4198669 --dlarg 4198662 --dlarg 1 --dlarg last
start API
filter_event_early API
filter_event API
stop API
Command: /var/home/acme/bin/perf script -i /tmp/dlfilter-test-3387712-perf-data --dlfilter /var/home/acme/libexec/perf-core/dlfilters/dlfilter-test-api-v0.so --dlarg first --dlarg 1 --dlarg 4198669 --dlarg 4198662 --dlarg 2 --dlarg last
start API
filter_event_early API
stop API
test child finished with 0
---- end ----
dlfilter C API: Ok
[root@five ~]#
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https //lore.kernel.org/r/20210811101036.17986-7-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move perf_dlfilters.h in the source tree so that it will be found when
building dlfilters as part of the perf build.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https //lore.kernel.org/r/20210811101036.17986-6-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Like all locally-built programs, dlfilters may need to be re-built if
shared libraries they use change. Also there may be unexpected results
if the dfilter uses different versions of the shared libraries that perf
uses.
Note those things in the documentation.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https //lore.kernel.org/r/20210811101036.17986-5-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The option --list-dlfilters does use a string value.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Fixes: 638e2b9984 ("perf script Add option to list dlfilters")
Link: https //lore.kernel.org/r/20210811101036.17986-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
machine_resolve() may have already been called. Test for that to avoid
calling it again unnecessarily.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https //lore.kernel.org/r/20210811101036.17986-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_dlfilter_fns must not be const, because it is not.
Declaring it const can result in it being mapped read-only, causing a
segfaullt when it is written. Update documentation accordingly.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Fixes: 8defa7147d5572 ("perf script Add API for filtering via dynamically loaded shared object")
Link: https //lore.kernel.org/r/20210811101036.17986-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Update JSON metrics for SkyLake Server.
Based on TMA metrics 4.21 at 01.org.
https://download.01.org/perfmon/
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linux-kernel@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https //lore.kernel.org/r/20210810020508.31261-7-yao.jin@linux.intel.com
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Update JSON uncore events for SkyLake Server.
Based on JSON list v1.24:
https://download.01.org/perfmon/SKX/
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linux-kernel@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https //lore.kernel.org/r/20210810020508.31261-6-yao.jin@linux.intel.com
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Update JSON core events for SkyLake Server.
Based on JSON list v1.24:
https://download.01.org/perfmon/SKX/
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linux-kernel@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https //lore.kernel.org/r/20210810020508.31261-5-yao.jin@linux.intel.com
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Update JSON metrics for CascadeLake Server.
Based on TMA metrics 4.21 at 01.org.
https://download.01.org/perfmon/
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linux-kernel@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https //lore.kernel.org/r/20210810020508.31261-4-yao.jin@linux.intel.com
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Update JSON uncore events for CascadeLake Server.
Based on JSON list v1.11:
https://download.01.org/perfmon/CLX/
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linux-kernel@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https //lore.kernel.org/r/20210810020508.31261-3-yao.jin@linux.intel.com
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Update JSON core events for CascadeLake Server.
Based on JSON list v1.11:
https://download.01.org/perfmon/CLX/
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linux-kernel@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https //lore.kernel.org/r/20210810020508.31261-2-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support for system events, along with core and uncore events.
Support for a sample PMU is also added.
Signed-off-by: John Garry <john.garry@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxarm@huawei.com
Link: https //lore.kernel.org/r/1627566986-30605-12-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
