78e709522d
26731 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
78e709522d |
virtio,vdpa,vhost: features, fixes
vduse driver supporting blk
virtio-vsock support for end of record with SEQPACKET
vdpa: mac and mq support for ifcvf and mlx5
vdpa: management netlink for ifcvf
virtio-i2c, gpio dt bindings
misc fixes, cleanups
NB: when merging this with
|
||
|
Linus Torvalds
|
dd4703876e |
- Add the tegra3 thermal sensor and fix the compilation testing on
tegra by adding a dependency on ARCH_TEGRA along with COMPILE_TEST (Dmitry Osipenko) - Fix the error code for the exynos when devm_get_clk() fails (Dan Carpenter) - Add the TCC cooling support for AlderLake platform (Sumeet Pawnikar) - Add support for hardware trip points for the rcar gen3 thermal driver and store TSC id as unsigned int (Niklas Söderlund) - Replace the deprecated CPU-hotplug functions get_online_cpus() and put_online_cpus (Sebastian Andrzej Siewior) - Add the thermal tools directory in the MAINTAINERS file (Daniel Lezcano) - Fix the Makefile and the cross compilation flags for the userspace 'tmon' tool (Rolf Eike Beer) - Allow to use the IMOK independently from the GDDV on Int340x (Sumeet Pawnikar) - Fix the stub thermal_cooling_device_register() function prototype which does not match the real function (Arnd Bergmann) - Make the thermal trip point optional in the DT bindings (Maxime Ripard) - Fix a typo in a comment in the core code (Geert Uytterhoeven) - Reduce the verbosity of the trace in the SoC thermal tegra driver (Dmitry Osipenko) - Add the support for the LMh (Limit Management hardware) driver on the QCom platforms (Thara Gopinath) - Allow processing of HWP interrupt by adding a weak function in the Intel driver (Srinivas Pandruvada) - Prevent an abort of the sensor probe is a channel is not used (Matthias Kaehlcke) -----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmE7yAcACgkQqDIjiipP 6E8WKwgAmI+kdOURCz1CtCIv6FnQFx20suxZidfATPULBPZ8zcHqdjxJECXJpvDz y8T8dGAPRqXmMBJm2vF/qVraHaDJvscHXaflhsurhyEp0tiGptNeugBosso0jDEQ JFrQ6Rny/NCmNMOkWW4YlSfkik0zQ43xlHocy3UfOKfcshhYWGsPTbIXdA6wH/zh 3tFW8j327tkyenrKZiaioJOSX88Oyy7Ft8l5k0HP+hPYkrvihWDJuEfEEmpfkdA7 Q70Lacf2QtFP8mUfGKpQxURSgndjphDPU7tzP5NqqWvLuT94aTspvJx4ywVwK8Iv o+jNvR33yBIs5FXXB7B1ymkNE1h8uQ== =blIQ -----END PGP SIGNATURE----- Merge tag 'thermal-v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux Pull thermal updates from Daniel Lezcano: - Add the tegra3 thermal sensor and fix the compilation testing on tegra by adding a dependency on ARCH_TEGRA along with COMPILE_TEST (Dmitry Osipenko) - Fix the error code for the exynos when devm_get_clk() fails (Dan Carpenter) - Add the TCC cooling support for AlderLake platform (Sumeet Pawnikar) - Add support for hardware trip points for the rcar gen3 thermal driver and store TSC id as unsigned int (Niklas Söderlund) - Replace the deprecated CPU-hotplug functions get_online_cpus() and put_online_cpus (Sebastian Andrzej Siewior) - Add the thermal tools directory in the MAINTAINERS file (Daniel Lezcano) - Fix the Makefile and the cross compilation flags for the userspace 'tmon' tool (Rolf Eike Beer) - Allow to use the IMOK independently from the GDDV on Int340x (Sumeet Pawnikar) - Fix the stub thermal_cooling_device_register() function prototype which does not match the real function (Arnd Bergmann) - Make the thermal trip point optional in the DT bindings (Maxime Ripard) - Fix a typo in a comment in the core code (Geert Uytterhoeven) - Reduce the verbosity of the trace in the SoC thermal tegra driver (Dmitry Osipenko) - Add the support for the LMh (Limit Management hardware) driver on the QCom platforms (Thara Gopinath) - Allow processing of HWP interrupt by adding a weak function in the Intel driver (Srinivas Pandruvada) - Prevent an abort of the sensor probe is a channel is not used (Matthias Kaehlcke) * tag 'thermal-v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: thermal/drivers/qcom/spmi-adc-tm5: Don't abort probing if a sensor is not used thermal/drivers/intel: Allow processing of HWP interrupt dt-bindings: thermal: Add dt binding for QCOM LMh thermal/drivers/qcom: Add support for LMh driver firmware: qcom_scm: Introduce SCM calls to access LMh thermal/drivers/tegra-soctherm: Silence message about clamped temperature thermal: Spelling s/scallbacks/callbacks/ dt-bindings: thermal: Make trips node optional thermal/core: Fix thermal_cooling_device_register() prototype thermal/drivers/int340x: Use IMOK independently tools/thermal/tmon: Add cross compiling support thermal/tools/tmon: Improve the Makefile MAINTAINERS: Add missing userspace thermal tools to the thermal section thermal/drivers/intel_powerclamp: Replace deprecated CPU-hotplug functions. thermal/drivers/rcar_gen3_thermal: Store TSC id as unsigned int thermal/drivers/rcar_gen3_thermal: Add support for hardware trip points drivers/thermal/intel: Add TCC cooling support for AlderLake platform thermal/drivers/exynos: Fix an error code in exynos_tmu_probe() thermal/drivers/tegra: Correct compile-testing of drivers thermal/drivers/tegra: Add driver for Tegra30 thermal sensor |
||
|
Linus Torvalds
|
43175623dd |
More tracing updates for 5.15:
- Add migrate-disable counter to tracing header - Fix error handling in event probes - Fix missed unlock in osnoise in error path - Fix merge issue with tools/bootconfig - Clean up bootconfig data when init memory is removed - Fix bootconfig to loop only on subkeys - Have kernel command lines override bootconfig options - Increase field counts for synthetic events - Have histograms dynamic allocate event elements to save space - Fixes in testing and documentation -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYToFZBQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qtg5AP44U3Dn1m1lQo3y1DJ9kUP3HsAsDofS Cv7ZM9tLV2p4MQEA9KJc3/B/5BZEK1kso3uLeLT+WxJOC4YStXY19WwmjAI= =Wuo+ -----END PGP SIGNATURE----- Merge tag 'trace-v5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull more tracing updates from Steven Rostedt: - Add migrate-disable counter to tracing header - Fix error handling in event probes - Fix missed unlock in osnoise in error path - Fix merge issue with tools/bootconfig - Clean up bootconfig data when init memory is removed - Fix bootconfig to loop only on subkeys - Have kernel command lines override bootconfig options - Increase field counts for synthetic events - Have histograms dynamic allocate event elements to save space - Fixes in testing and documentation * tag 'trace-v5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing/boot: Fix to loop on only subkeys selftests/ftrace: Exclude "(fault)" in testing add/remove eprobe events tracing: Dynamically allocate the per-elt hist_elt_data array tracing: synth events: increase max fields count tools/bootconfig: Show whole test command for each test case bootconfig: Fix missing return check of xbc_node_compose_key function tools/bootconfig: Fix tracing_on option checking in ftrace2bconf.sh docs: bootconfig: Add how to use bootconfig for kernel parameters init/bootconfig: Reorder init parameter from bootconfig and cmdline init: bootconfig: Remove all bootconfig data when the init memory is removed tracing/osnoise: Fix missed cpus_read_unlock() in start_per_cpu_kthreads() tracing: Fix some alloc_event_probe() error handling bugs tracing: Add migrate-disabled counter to tracing output. |
||
|
Linus Torvalds
|
2d338201d5 |
Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton:
"147 patches, based on
|
||
Steven Rostedt (VMware)
|
04178ea130 |
selftests/ftrace: Exclude "(fault)" in testing add/remove eprobe events
The original test for adding and removing eprobes used synthetic events
and retrieved the filename from the open system call at the end of the
system call. This would allow it to always be loaded into the page tables
when accessed.
Masami suggested that the test was too complex for just testing add and
remove, so it was changed to test just adding and removing an event probe
on top of the start of the open system call event. Now it is possible that
the filename will not be loaded into memory at the time the eprobe is
triggered, and will result in "(fault)" being displayed in the event. This
causes the test to fail.
Account for "(fault)" also being one of the values of the filename field
of the event probe.
Link: https://lkml.kernel.org/r/20210907230429.5783d519@rorschach.local.home
Fixes:
|
||
Masami Hiramatsu
|
47914d4e59 |
tools/bootconfig: Show whole test command for each test case
Show whole test command instead of only the 3rd argument. This will clear to show what will be actually tested by each test case. Link: https://lkml.kernel.org/r/163077088607.222577.14786016266462495017.stgit@devnote2 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> |
||
Julio Faracco
|
903bd067fa |
bootconfig: Fix missing return check of xbc_node_compose_key function
The function `xbc_show_list should` handle the keys during the
composition. Even the errors returned by the compose function. Instead
of removing the `ret` variable, it should save the value and show the
exact error. This missing variable is causing a compilation issue also.
Link: https://lkml.kernel.org/r/163077087861.222577.12884543474750968146.stgit@devnote2
Fixes:
|
||
|
Masami Hiramatsu
|
32ba9f0fb0 |
tools/bootconfig: Fix tracing_on option checking in ftrace2bconf.sh
Since tracing_on indicates only "1" (default) or "0", ftrace2bconf.sh
only need to check the value is "0".
Link: https://lkml.kernel.org/r/163077087144.222577.6888011847727968737.stgit@devnote2
Fixes:
|
||
Greg Thelen
|
d42990f486 |
selftests/memfd: remove unused variable
Commit |
||
Andy Shevchenko
|
7fc5b57132 |
tools: rename bitmap_alloc() to bitmap_zalloc()
Rename bitmap_alloc() to bitmap_zalloc() in tools to follow the bitmap API in the kernel. No functional changes intended. Link: https://lkml.kernel.org/r/20210814211713.180533-14-yury.norov@gmail.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Yury Norov <yury.norov@gmail.com> Suggested-by: Yury Norov <yury.norov@gmail.com> Acked-by: Yury Norov <yury.norov@gmail.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Lobakin <alobakin@pm.me> Cc: Alexey Klimov <aklimov@redhat.com> Cc: Dennis Zhou <dennis@kernel.org> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
SeongJae Park
|
b348eb7abd |
mm/damon: add user space selftests
This commit adds a simple user space tests for DAMON. The tests are using kselftest framework. Link: https://lkml.kernel.org/r/20210716081449.22187-13-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Markus Boehme <markubo@amazon.de> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Fernand Sieber <sieberf@amazon.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Marco Elver <elver@google.com> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
ac08b1c68d |
pci-v5.15-changes
-----BEGIN PGP SIGNATURE-----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=g1WT
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Convert controller drivers to generic_handle_domain_irq() (Marc
Zyngier)
- Simplify VPD (Vital Product Data) access and search (Heiner
Kallweit)
- Update bnx2, bnx2x, bnxt, cxgb4, cxlflash, sfc, tg3 drivers to use
simplified VPD interfaces (Heiner Kallweit)
- Run Max Payload Size quirks before configuring MPS; work around
ASMedia ASM1062 SATA MPS issue (Marek Behún)
Resource management:
- Refactor pci_ioremap_bar() and pci_ioremap_wc_bar() (Krzysztof
Wilczyński)
- Optimize pci_resource_len() to reduce kernel size (Zhen Lei)
PCI device hotplug:
- Fix a double unmap in ibmphp (Vishal Aslot)
PCIe port driver:
- Enable Bandwidth Notification only if port supports it (Stuart
Hayes)
Sysfs/proc/syscalls:
- Add schedule point in proc_bus_pci_read() (Krzysztof Wilczyński)
- Return ~0 data on pciconfig_read() CAP_SYS_ADMIN failure (Krzysztof
Wilczyński)
- Return "int" from pciconfig_read() syscall (Krzysztof Wilczyński)
Virtualization:
- Extend "pci=noats" to also turn on Translation Blocking to protect
against some DMA attacks (Alex Williamson)
- Add sysfs mechanism to control the type of reset used between
device assignments to VMs (Amey Narkhede)
- Add support for ACPI _RST reset method (Shanker Donthineni)
- Add ACS quirks for Cavium multi-function devices (George Cherian)
- Add ACS quirks for NXP LX2xx0 and LX2xx2 platforms (Wasim Khan)
- Allow HiSilicon AMBA devices that appear as fake PCI devices to use
PASID and SVA (Zhangfei Gao)
Endpoint framework:
- Add support for SR-IOV Endpoint devices (Kishon Vijay Abraham I)
- Zero-initialize endpoint test tool parameters so we don't use
random parameters (Shunyong Yang)
APM X-Gene PCIe controller driver:
- Remove redundant dev_err() call in xgene_msi_probe() (ErKun Yang)
Broadcom iProc PCIe controller driver:
- Don't fail devm_pci_alloc_host_bridge() on missing 'ranges' because
it's optional on BCMA devices (Rob Herring)
- Fix BCMA probe resource handling (Rob Herring)
Cadence PCIe driver:
- Work around J7200 Link training electrical issue by increasing
delays in LTSSM (Nadeem Athani)
Intel IXP4xx PCI controller driver:
- Depend on ARCH_IXP4XX to avoid useless config questions (Geert
Uytterhoeven)
Intel Keembay PCIe controller driver:
- Add Intel Keem Bay PCIe controller (Srikanth Thokala)
Marvell Aardvark PCIe controller driver:
- Work around config space completion handling issues (Evan Wang)
- Increase timeout for config access completions (Pali Rohár)
- Emulate CRS Software Visibility bit (Pali Rohár)
- Configure resources from DT 'ranges' property to fix I/O space
access (Pali Rohár)
- Serialize INTx mask/unmask (Pali Rohár)
MediaTek PCIe controller driver:
- Add MT7629 support in DT (Chuanjia Liu)
- Fix an MSI issue (Chuanjia Liu)
- Get syscon regmap ("mediatek,generic-pciecfg"), IRQ number
("pci_irq"), PCI domain ("linux,pci-domain") from DT properties if
present (Chuanjia Liu)
Microsoft Hyper-V host bridge driver:
- Add ARM64 support (Boqun Feng)
- Support "Create Interrupt v3" message (Sunil Muthuswamy)
NVIDIA Tegra PCIe controller driver:
- Use seq_puts(), move err_msg from stack to static, fix OF node leak
(Christophe JAILLET)
NVIDIA Tegra194 PCIe driver:
- Disable suspend when in Endpoint mode (Om Prakash Singh)
- Fix MSI-X address programming error (Om Prakash Singh)
- Disable interrupts during suspend to avoid spurious AER link down
(Om Prakash Singh)
Renesas R-Car PCIe controller driver:
- Work around hardware issue that prevents Link L1->L0 transition
(Marek Vasut)
- Fix runtime PM refcount leak (Dinghao Liu)
Rockchip DesignWare PCIe controller driver:
- Add Rockchip RK356X host controller driver (Simon Xue)
TI J721E PCIe driver:
- Add support for J7200 and AM64 (Kishon Vijay Abraham I)
Toshiba Visconti PCIe controller driver:
- Add Toshiba Visconti PCIe host controller driver (Nobuhiro
Iwamatsu)
Xilinx NWL PCIe controller driver:
- Enable PCIe reference clock via CCF (Hyun Kwon)
Miscellaneous:
- Convert sta2x11 from 'pci_' to 'dma_' API (Christophe JAILLET)
- Fix pci_dev_str_match_path() alloc while atomic bug (used for
kernel parameters that specify devices) (Dan Carpenter)
- Remove pointless Precision Time Management warning when PTM is
present but not enabled (Jakub Kicinski)
- Remove surplus "break" statements (Krzysztof Wilczyński)"
* tag 'pci-v5.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (132 commits)
PCI: ibmphp: Fix double unmap of io_mem
x86/PCI: sta2x11: switch from 'pci_' to 'dma_' API
PCI/VPD: Use unaligned access helpers
PCI/VPD: Clean up public VPD defines and inline functions
cxgb4: Use pci_vpd_find_id_string() to find VPD ID string
PCI/VPD: Add pci_vpd_find_id_string()
PCI/VPD: Include post-processing in pci_vpd_find_tag()
PCI/VPD: Stop exporting pci_vpd_find_info_keyword()
PCI/VPD: Stop exporting pci_vpd_find_tag()
PCI: Set dma-can-stall for HiSilicon chips
PCI: rockchip-dwc: Add Rockchip RK356X host controller driver
PCI: dwc: Remove surplus break statement after return
PCI: artpec6: Remove local code block from switch statement
PCI: artpec6: Remove surplus break statement after return
MAINTAINERS: Add entries for Toshiba Visconti PCIe controller
PCI: visconti: Add Toshiba Visconti PCIe host controller driver
PCI/portdrv: Enable Bandwidth Notification only if port supports it
PCI: Allow PASID on fake PCIe devices without TLP prefixes
PCI: mediatek: Use PCI domain to handle ports detection
PCI: mediatek: Add new method to get irq number
...
|
||
|
Linus Torvalds
|
626bf91a29 |
Networking stragglers and fixes for 5.15-rc1, including changes from netfilter,
wireless and can.
Current release - regressions:
- qrtr: revert check in qrtr_endpoint_post(), fixes audio and wifi
- ip_gre: validate csum_start only on pull
- bnxt_en: fix 64-bit doorbell operation on 32-bit kernels
- ionic: fix double use of queue-lock, fix a sleeping in atomic
- can: c_can: fix null-ptr-deref on ioctl()
- cs89x0: disable compile testing on powerpc
Current release - new code bugs:
- bridge: mcast: fix vlan port router deadlock, consistently disable BH
Previous releases - regressions:
- dsa: tag_rtl4_a: fix egress tags, only port 0 was working
- mptcp: fix possible divide by zero
- netfilter: nft_ct: protect nft_ct_pcpu_template_refcnt with mutex
- netfilter: socket: icmp6: fix use-after-scope
- stmmac: fix MAC not working when system resume back with WoL active
Previous releases - always broken:
- ip/ip6_gre: use the same logic as SIT interfaces when computing v6LL
address
- seg6: set fc_nlinfo in nh_create_ipv4, nh_create_ipv6
- mptcp: only send extra TCP acks in eligible socket states
- dsa: lantiq_gswip: fix maximum frame length
- stmmac: fix overall budget calculation for rxtx_napi
- bnxt_en: fix firmware version reporting via devlink
- renesas: sh_eth: add missing barrier to fix freeing wrong tx descriptor
Stragglers:
- netfilter: conntrack: switch to siphash
- netfilter: refuse insertion if chain has grown too large
- ncsi: add get MAC address command to get Intel i210 MAC address
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Zvuz
-----END PGP SIGNATURE-----
Merge tag 'net-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes and stragglers from Jakub Kicinski:
"Networking stragglers and fixes, including changes from netfilter,
wireless and can.
Current release - regressions:
- qrtr: revert check in qrtr_endpoint_post(), fixes audio and wifi
- ip_gre: validate csum_start only on pull
- bnxt_en: fix 64-bit doorbell operation on 32-bit kernels
- ionic: fix double use of queue-lock, fix a sleeping in atomic
- can: c_can: fix null-ptr-deref on ioctl()
- cs89x0: disable compile testing on powerpc
Current release - new code bugs:
- bridge: mcast: fix vlan port router deadlock, consistently disable
BH
Previous releases - regressions:
- dsa: tag_rtl4_a: fix egress tags, only port 0 was working
- mptcp: fix possible divide by zero
- netfilter: nft_ct: protect nft_ct_pcpu_template_refcnt with mutex
- netfilter: socket: icmp6: fix use-after-scope
- stmmac: fix MAC not working when system resume back with WoL active
Previous releases - always broken:
- ip/ip6_gre: use the same logic as SIT interfaces when computing
v6LL address
- seg6: set fc_nlinfo in nh_create_ipv4, nh_create_ipv6
- mptcp: only send extra TCP acks in eligible socket states
- dsa: lantiq_gswip: fix maximum frame length
- stmmac: fix overall budget calculation for rxtx_napi
- bnxt_en: fix firmware version reporting via devlink
- renesas: sh_eth: add missing barrier to fix freeing wrong tx
descriptor
Stragglers:
- netfilter: conntrack: switch to siphash
- netfilter: refuse insertion if chain has grown too large
- ncsi: add get MAC address command to get Intel i210 MAC address"
* tag 'net-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (76 commits)
ieee802154: Remove redundant initialization of variable ret
net: stmmac: fix MAC not working when system resume back with WoL active
net: phylink: add suspend/resume support
net: renesas: sh_eth: Fix freeing wrong tx descriptor
bonding: 3ad: pass parameter bond_params by reference
cxgb3: fix oops on module removal
can: c_can: fix null-ptr-deref on ioctl()
can: rcar_canfd: add __maybe_unused annotation to silence warning
net: wwan: iosm: Unify IO accessors used in the driver
net: wwan: iosm: Replace io.*64_lo_hi() with regular accessors
net: qcom/emac: Replace strlcpy with strscpy
ip6_gre: Revert "ip6_gre: add validation for csum_start"
net: hns3: make hclgevf_cmd_caps_bit_map0 and hclge_cmd_caps_bit_map0 static
selftests/bpf: Test XDP bonding nest and unwind
bonding: Fix negative jump label count on nested bonding
MAINTAINERS: add VM SOCKETS (AF_VSOCK) entry
stmmac: dwmac-loongson:Fix missing return value
iwlwifi: fix printk format warnings in uefi.c
net: create netdev->dev_addr assignment helpers
bnxt_en: Fix possible unintended driver initiated error recovery
...
|
||
|
Linus Torvalds
|
192ad3c27a |
ARM:
- Page ownership tracking between host EL1 and EL2
- Rely on userspace page tables to create large stage-2 mappings
- Fix incompatibility between pKVM and kmemleak
- Fix the PMU reset state, and improve the performance of the virtual PMU
- Move over to the generic KVM entry code
- Address PSCI reset issues w.r.t. save/restore
- Preliminary rework for the upcoming pKVM fixed feature
- A bunch of MM cleanups
- a vGIC fix for timer spurious interrupts
- Various cleanups
s390:
- enable interpretation of specification exceptions
- fix a vcpu_idx vs vcpu_id mixup
x86:
- fast (lockless) page fault support for the new MMU
- new MMU now the default
- increased maximum allowed VCPU count
- allow inhibit IRQs on KVM_RUN while debugging guests
- let Hyper-V-enabled guests run with virtualized LAPIC as long as they
do not enable the Hyper-V "AutoEOI" feature
- fixes and optimizations for the toggling of AMD AVIC (virtualized LAPIC)
- tuning for the case when two-dimensional paging (EPT/NPT) is disabled
- bugfixes and cleanups, especially with respect to 1) vCPU reset and
2) choosing a paging mode based on CR0/CR4/EFER
- support for 5-level page table on AMD processors
Generic:
- MMU notifier invalidation callbacks do not take mmu_lock unless necessary
- improved caching of LRU kvm_memory_slot
- support for histogram statistics
- add statistics for halt polling and remote TLB flush requests
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmE2CIAUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMyqwf+Ky2WoThuQ9Ra0r/m8pUTAx5+gsAf
MmG24rNLE+26X0xuBT9Q5+etYYRLrRTWJvo5cgHooz7muAYW6scR+ho5xzvLTAxi
DAuoijkXsSdGoFCp0OMUHiwG3cgY5N7feTEwLPAb2i6xr/l6SZyCP4zcwiiQbJ2s
UUD0i3rEoNQ02/hOEveud/ENxzUli9cmmgHKXR3kNgsJClSf1fcuLnhg+7EGMhK9
+c2V+hde5y0gmEairQWm22MLMRolNZ5NL4kjykiNh2M5q9YvbHe5+f/JmENlNZMT
bsUQT6Ry1ukuJ0V59rZvUw71KknPFzZ3d6HgW4pwytMq6EJKiISHzRbVnQ==
=FCAB
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"ARM:
- Page ownership tracking between host EL1 and EL2
- Rely on userspace page tables to create large stage-2 mappings
- Fix incompatibility between pKVM and kmemleak
- Fix the PMU reset state, and improve the performance of the virtual
PMU
- Move over to the generic KVM entry code
- Address PSCI reset issues w.r.t. save/restore
- Preliminary rework for the upcoming pKVM fixed feature
- A bunch of MM cleanups
- a vGIC fix for timer spurious interrupts
- Various cleanups
s390:
- enable interpretation of specification exceptions
- fix a vcpu_idx vs vcpu_id mixup
x86:
- fast (lockless) page fault support for the new MMU
- new MMU now the default
- increased maximum allowed VCPU count
- allow inhibit IRQs on KVM_RUN while debugging guests
- let Hyper-V-enabled guests run with virtualized LAPIC as long as
they do not enable the Hyper-V "AutoEOI" feature
- fixes and optimizations for the toggling of AMD AVIC (virtualized
LAPIC)
- tuning for the case when two-dimensional paging (EPT/NPT) is
disabled
- bugfixes and cleanups, especially with respect to vCPU reset and
choosing a paging mode based on CR0/CR4/EFER
- support for 5-level page table on AMD processors
Generic:
- MMU notifier invalidation callbacks do not take mmu_lock unless
necessary
- improved caching of LRU kvm_memory_slot
- support for histogram statistics
- add statistics for halt polling and remote TLB flush requests"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (210 commits)
KVM: Drop unused kvm_dirty_gfn_invalid()
KVM: x86: Update vCPU's hv_clock before back to guest when tsc_offset is adjusted
KVM: MMU: mark role_regs and role accessors as maybe unused
KVM: MIPS: Remove a "set but not used" variable
x86/kvm: Don't enable IRQ when IRQ enabled in kvm_wait
KVM: stats: Add VM stat for remote tlb flush requests
KVM: Remove unnecessary export of kvm_{inc,dec}_notifier_count()
KVM: x86/mmu: Move lpage_disallowed_link further "down" in kvm_mmu_page
KVM: x86/mmu: Relocate kvm_mmu_page.tdp_mmu_page for better cache locality
Revert "KVM: x86: mmu: Add guest physical address check in translate_gpa()"
KVM: x86/mmu: Remove unused field mmio_cached in struct kvm_mmu_page
kvm: x86: Increase KVM_SOFT_MAX_VCPUS to 710
kvm: x86: Increase MAX_VCPUS to 1024
kvm: x86: Set KVM_MAX_VCPU_ID to 4*KVM_MAX_VCPUS
KVM: VMX: avoid running vmx_handle_exit_irqoff in case of emulation
KVM: x86/mmu: Don't freak out if pml5_root is NULL on 4-level host
KVM: s390: index kvm->arch.idle_mask by vcpu_idx
KVM: s390: Enable specification exception interpretation
KVM: arm64: Trim guest debug exception handling
KVM: SVM: Add 5-level page table support for SVM
...
|
||
Jussi Maki
|
4a9c93dc47 |
selftests/bpf: Test XDP bonding nest and unwind
Modify the test to check that enslaving a bond slave with a XDP program is now allowed. Extend attach test to exercise the program unwinding in bond_xdp_set and add a new test for loading XDP program on doubly nested bond device to verify that static key incr/decr is correct. Signed-off-by: Jussi Maki <joamaki@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Paolo Bonzini
|
e99314a340 |
KVM/arm64 updates for 5.15
- Page ownership tracking between host EL1 and EL2 - Rely on userspace page tables to create large stage-2 mappings - Fix incompatibility between pKVM and kmemleak - Fix the PMU reset state, and improve the performance of the virtual PMU - Move over to the generic KVM entry code - Address PSCI reset issues w.r.t. save/restore - Preliminary rework for the upcoming pKVM fixed feature - A bunch of MM cleanups - a vGIC fix for timer spurious interrupts - Various cleanups -----BEGIN PGP SIGNATURE----- iQJDBAABCgAtFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAmEnfogPHG1hekBrZXJu ZWwub3JnAAoJECPQ0LrRPXpDF9oQAINWHN1n30gsxcErMV8gH+XAyhDq2vTjkExQ Qz5ddo4R5zeVkj0nkunFSK+W3xYz+W97X3I+IaiiHvk5D6dUatj37IyYlazX5iFT 7mbjTAqY7GRxfd6um7uK+CTRCApXY49GGkCVLGA5f+6mQ0JMVXaK9AKlsXKWUQLZ JvLasUgKkseN6IEJWmPDNBdIeiKBTZloeZMdlM2vSm34HsuirSS5LmshdzJQzSk8 QSEqwXZX50afzJLNlB9Qa6V1tokjZVoYIBk0vAPO83tTh9HIyGL/PFAqBeq2rnWT M19fFFbx5vizap4ICbpviLmZ5AOywCoBmbPBT79eMAJ53rOqHUJhU1y/3DoiVzxu LJZI4wmGBQZVivOWOqyEZcNtTAagPLhyrLhMzYulBLwAjfFJmUHdSOxYtx+2Ysvr SDIPN31FKWrvifTXTqJHDmaaXusi2CNZUOPzVSe2I14SbX+ZX2ny9DltlbRgPNuc hGJagI5cZc0ngd4mAIzjjNmgBS2B+dSc8dOo71dRNJRLtQLiNHcAyQNJyFme+4xI NpvpkvzxBAs8rG2X0YIR/Cz3W3yZoCYuQNcoPk7+F/bUTK47VocQCS+gLucHVLbT H4286EV5n4nZ7E01oJ6uWnDnslPvrx9Sz2fxsrWYkBDR+xrz0EprrGsftFaILprz Ic43uXfd =LuHM -----END PGP SIGNATURE----- Merge tag 'kvmarm-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 updates for 5.15 - Page ownership tracking between host EL1 and EL2 - Rely on userspace page tables to create large stage-2 mappings - Fix incompatibility between pKVM and kmemleak - Fix the PMU reset state, and improve the performance of the virtual PMU - Move over to the generic KVM entry code - Address PSCI reset issues w.r.t. save/restore - Preliminary rework for the upcoming pKVM fixed feature - A bunch of MM cleanups - a vGIC fix for timer spurious interrupts - Various cleanups |
||
Arseny Krasnov
|
0e115c45ee |
vsock_test: update message bounds test for MSG_EOR
Set 'MSG_EOR' in one of message sent, check that 'MSG_EOR' is visible in corresponding message at receiver. Signed-off-by: Arseny Krasnov <arseny.krasnov@kaspersky.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20210903123321.3273866-1-arseny.krasnov@kaspersky.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> |
||
|
Linus Torvalds
|
27151f1778 |
perf tools changes for v5.15:
New features:
- Improvements for the flamegraph python script, including:
- Display perf.data header
- Display PIDs of user stacks
- Added option to change color scheme
- Default to blue/green color scheme to improve accessibility
- Correctly identify kernel stacks when debuginfo is available
- Improvements for 'perf bench futex':
- Add --mlockall parameter
- Add --broadcast and --pi to the 'requeue' sub benchmark
- Add support for PMU aliases.
- Introduce an ARM Coresight ETE decoder.
- Add a 'perf bench' entry for evlist open/close operations, to help quantify
improvements with multithreading 'perf record'.
- Allow reporting the [un]throttle PERF_RECORD_ meta event in 'perf script's
python scripting.
- Add a 'perf test' entry for PMU aliases.
- Add a 'perf test' entry for 'perf record/perf report/perf script' pipe mode.
Fixes:
- perf script dlfilter (API for filtering via dynamically loaded shared object
introduced in v5.14) fixes and a 'perf test' entry for it.
- Fix get_current_dir_name() compilation on Android.
- Fix issues with asciidoc and double dashes uses.
- Fix memory leaks in the BTF handling code.
- Fix leftover problems in the Documentation from the infrastructure originally
lifted from the git codebase.
- Fix *probe_vfs_getname.sh 'perf test' failures.
- Handle fd gaps in 'perf test's test__dso_data_reopen().
- Make sure to show disasembly warnings for 'perf annotate --stdio'.
- Fix output from pipe to file and vice-versa in 'perf record/report/script'.
- Correct 'perf data -h' output.
- Fix wrong comm in system-wide mode with 'perf record --delay'.
- Do not allow --for-each-cgroup without cpu in 'perf stat'
- Make 'perf test --skip' work on shell tests.
- Fix libperf's verbose printing.
Misc improvements:
- Preparatory patches for multithreading varios 'perf record' phases
(synthesizing, opening, recording, etc).
- Add sparse context/locking annotations in compiler-types.h, also to help with
the multithreading effort.
- Optimize the generation of the arch specific erno tables used in 'perf trace'.
- Optimize libperf's perf_cpu_map__max().
- Improve ARM's CoreSight warnings.
- Report collisions in AUX records.
- Improve warnings for the LLVM 'perf test' entry.
- Improve the PMU events 'perf test' codebase.
- perf test: Do not compare overheads in the zstd comp test
- Better support annotation on ARM.
- Update 'perf trace's cmd string table to decode sys_bpf() first arg.
Vendor events:
- Add JSON events and metrics for Intel's Ice Lake, Tiger Lake and Elhart Lake.
- Update JSON eventsand metrics for Intel's Cascade Lake and Sky Lake servers.
Hardware tracing:
- Improvements for the ARM hardware tracing auxtrace support.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYTO8OAAKCRCyPKLppCJ+
J/N0AQCTAfxKsVyh9vjIY5vwHvNkYMDM4Wvs7TmlfXbVgKLP3AEA0wYlTyar/teI
NC6jQpipxpWASFUJbLSmU8qn/XFXwQo=
=4r0w
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-for-v5.15-2021-09-04' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tool updates from Arnaldo Carvalho de Melo:
"New features:
- Improvements for the flamegraph python script, including:
- Display perf.data header
- Display PIDs of user stacks
- Added option to change color scheme
- Default to blue/green color scheme to improve accessibility
- Correctly identify kernel stacks when debuginfo is available
- Improvements for 'perf bench futex':
- Add --mlockall parameter
- Add --broadcast and --pi to the 'requeue' sub benchmark
- Add support for PMU aliases.
- Introduce an ARM Coresight ETE decoder.
- Add a 'perf bench' entry for evlist open/close operations, to help
quantify improvements with multithreading 'perf record'.
- Allow reporting the [un]throttle PERF_RECORD_ meta event in 'perf
script's python scripting.
- Add a 'perf test' entry for PMU aliases.
- Add a 'perf test' entry for 'perf record/perf report/perf script'
pipe mode.
Fixes:
- perf script dlfilter (API for filtering via dynamically loaded
shared object introduced in v5.14) fixes and a 'perf test' entry
for it.
- Fix get_current_dir_name() compilation on Android.
- Fix issues with asciidoc and double dashes uses.
- Fix memory leaks in the BTF handling code.
- Fix leftover problems in the Documentation from the infrastructure
originally lifted from the git codebase.
- Fix *probe_vfs_getname.sh 'perf test' failures.
- Handle fd gaps in 'perf test's test__dso_data_reopen().
- Make sure to show disasembly warnings for 'perf annotate --stdio'.
- Fix output from pipe to file and vice-versa in 'perf
record/report/script'.
- Correct 'perf data -h' output.
- Fix wrong comm in system-wide mode with 'perf record --delay'.
- Do not allow --for-each-cgroup without cpu in 'perf stat'
- Make 'perf test --skip' work on shell tests.
- Fix libperf's verbose printing.
Misc improvements:
- Preparatory patches for multithreading various 'perf record' phases
(synthesizing, opening, recording, etc).
- Add sparse context/locking annotations in compiler-types.h, also to
help with the multithreading effort.
- Optimize the generation of the arch specific erno tables used in
'perf trace'.
- Optimize libperf's perf_cpu_map__max().
- Improve ARM's CoreSight warnings.
- Report collisions in AUX records.
- Improve warnings for the LLVM 'perf test' entry.
- Improve the PMU events 'perf test' codebase.
- perf test: Do not compare overheads in the zstd comp test
- Better support annotation on ARM.
- Update 'perf trace's cmd string table to decode sys_bpf() first
arg.
Vendor events:
- Add JSON events and metrics for Intel's Ice Lake, Tiger Lake and
Elhart Lake.
- Update JSON eventsand metrics for Intel's Cascade Lake and Sky Lake
servers.
Hardware tracing:
- Improvements for the ARM hardware tracing auxtrace support"
* tag 'perf-tools-for-v5.15-2021-09-04' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (130 commits)
perf tests: Add test for PMU aliases
perf pmu: Add PMU alias support
perf session: Report collisions in AUX records
perf script python: Allow reporting the [un]throttle PERF_RECORD_ meta event
perf build: Report failure for testing feature libopencsd
perf cs-etm: Show a warning for an unknown magic number
perf cs-etm: Print the decoder name
perf cs-etm: Create ETE decoder
perf cs-etm: Update OpenCSD decoder for ETE
perf cs-etm: Fix typo
perf cs-etm: Save TRCDEVARCH register
perf cs-etm: Refactor out ETMv4 header saving
perf cs-etm: Initialise architecture based on TRCIDR1
perf cs-etm: Refactor initialisation of decoder params.
tools build: Fix feature detect clean for out of source builds
perf evlist: Add evlist__for_each_entry_from() macro
perf evsel: Handle precise_ip fallback in evsel__open_cpu()
perf evsel: Move bpf_counter__install_pe() to success path in evsel__open_cpu()
perf evsel: Move test_attr__open() to success path in evsel__open_cpu()
perf evsel: Move ignore_missing_thread() to fallback code
...
|
||
|
Linus Torvalds
|
58ca241587 |
Tracing updates for 5.15:
- Simplifying the Kconfig use of FTRACE and TRACE_IRQFLAGS_SUPPORT
- bootconfig now can start histograms
- bootconfig supports group/all enabling
- histograms now can put values in linear size buckets
- execnames can be passed to synthetic events
- Introduction of "event probes" that attach to other events and
can retrieve data from pointers of fields, or record fields
as different types (a pointer to a string as a string instead
of just a hex number)
- Various fixes and clean ups
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYTJDixQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qnPLAP9XviWrZD27uFj6LU/Vp2umbq8la1aC
oW8o9itUGpLoHQD+OtsMpQXsWrxoNw/JD1OWCH4J0YN+TnZAUUG2E9e0twA=
=OZXG
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
- simplify the Kconfig use of FTRACE and TRACE_IRQFLAGS_SUPPORT
- bootconfig can now start histograms
- bootconfig supports group/all enabling
- histograms now can put values in linear size buckets
- execnames can be passed to synthetic events
- introduce "event probes" that attach to other events and can retrieve
data from pointers of fields, or record fields as different types (a
pointer to a string as a string instead of just a hex number)
- various fixes and clean ups
* tag 'trace-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (35 commits)
tracing/doc: Fix table format in histogram code
selftests/ftrace: Add selftest for testing duplicate eprobes and kprobes
selftests/ftrace: Add selftest for testing eprobe events on synthetic events
selftests/ftrace: Add test case to test adding and removing of event probe
selftests/ftrace: Fix requirement check of README file
selftests/ftrace: Add clear_dynamic_events() to test cases
tracing: Add a probe that attaches to trace events
tracing/probes: Reject events which have the same name of existing one
tracing/probes: Have process_fetch_insn() take a void * instead of pt_regs
tracing/probe: Change traceprobe_set_print_fmt() to take a type
tracing/probes: Use struct_size() instead of defining custom macros
tracing/probes: Allow for dot delimiter as well as slash for system names
tracing/probe: Have traceprobe_parse_probe_arg() take a const arg
tracing: Have dynamic events have a ref counter
tracing: Add DYNAMIC flag for dynamic events
tracing: Replace deprecated CPU-hotplug functions.
MAINTAINERS: Add an entry for os noise/latency
tracepoint: Fix kerneldoc comments
bootconfig/tracing/ktest: Update ktest example for boot-time tracing
tools/bootconfig: Use per-group/all enable option in ftrace2bconf script
...
|
||
|
Linus Torvalds
|
f1583cb1be |
linux-kselftest-next-5.15-rc1
This Kselftest update for Linux 5.15-rc1 consists of fixes to build
and test failures.
-- openat2 test failure for O_LARGEFILE flag on ARM64
-- x86 test build failures related to glibc 2.34 adding
support for variable sized MINSIGSTKSZ and SIGSTKSZ
-- removing obsolete configs in sync and cpufreq config files
-- minor spelling and duplicate header include cleanups
-----BEGIN PGP SIGNATURE-----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=Z7Bj
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-next-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest updates from Shuah Khan:
"Fixes to build and test failures:
- openat2 test failure for O_LARGEFILE flag on ARM64
- x86 test build failures related to glibc 2.34 adding support for
variable sized MINSIGSTKSZ and SIGSTKSZ
- removing obsolete configs in sync and cpufreq config files
- minor spelling and duplicate header include cleanups"
* tag 'linux-kselftest-next-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/cpufreq: Rename DEBUG_PI_LIST to DEBUG_PLIST
selftests/sync: Remove the deprecated config SYNC
selftests: safesetid: Fix spelling mistake "cant" -> "can't"
selftests/x86: Fix error: variably modified 'altstack_data' at file scope
kselftest:sched: remove duplicate include in cs_prctl_test.c
selftests: openat2: Fix testing failure for O_LARGEFILE flag
|
||
|
Linus Torvalds
|
7cca308cfd |
powerpc updates for 5.15
- Convert pseries & powernv to use MSI IRQ domains.
- Rework the pseries CPU numbering so that CPUs that are removed, and later re-added, are
given a CPU number on the same node as previously, when possible.
- Add support for a new more flexible device-tree format for specifying NUMA distances.
- Convert powerpc to GENERIC_PTDUMP.
- Retire sbc8548 and sbc8641d board support.
- Various other small features and fixes.
Thanks to: Alexey Kardashevskiy, Aneesh Kumar K.V, Anton Blanchard, Cédric Le Goater,
Christophe Leroy, Emmanuel Gil Peyrot, Fabiano Rosas, Fangrui Song, Finn Thain, Gautham R.
Shenoy, Hari Bathini, Joel Stanley, Jordan Niethe, Kajol Jain, Laurent Dufour, Leonardo
Bras, Lukas Bulwahn, Marc Zyngier, Masahiro Yamada, Michal Suchanek, Nathan Chancellor,
Nicholas Piggin, Parth Shah, Paul Gortmaker, Pratik R. Sampat, Randy Dunlap, Sebastian
Andrzej Siewior, Srikar Dronamraju, Wan Jiabing, Xiongwei Song, Zheng Yongjun.
-----BEGIN PGP SIGNATURE-----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=EbN0
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Convert pseries & powernv to use MSI IRQ domains.
- Rework the pseries CPU numbering so that CPUs that are removed, and
later re-added, are given a CPU number on the same node as
previously, when possible.
- Add support for a new more flexible device-tree format for specifying
NUMA distances.
- Convert powerpc to GENERIC_PTDUMP.
- Retire sbc8548 and sbc8641d board support.
- Various other small features and fixes.
Thanks to Alexey Kardashevskiy, Aneesh Kumar K.V, Anton Blanchard,
Cédric Le Goater, Christophe Leroy, Emmanuel Gil Peyrot, Fabiano Rosas,
Fangrui Song, Finn Thain, Gautham R. Shenoy, Hari Bathini, Joel
Stanley, Jordan Niethe, Kajol Jain, Laurent Dufour, Leonardo Bras, Lukas
Bulwahn, Marc Zyngier, Masahiro Yamada, Michal Suchanek, Nathan
Chancellor, Nicholas Piggin, Parth Shah, Paul Gortmaker, Pratik R.
Sampat, Randy Dunlap, Sebastian Andrzej Siewior, Srikar Dronamraju, Wan
Jiabing, Xiongwei Song, and Zheng Yongjun.
* tag 'powerpc-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (154 commits)
powerpc/bug: Cast to unsigned long before passing to inline asm
powerpc/ptdump: Fix generic ptdump for 64-bit
KVM: PPC: Fix clearing never mapped TCEs in realmode
powerpc/pseries/iommu: Rename "direct window" to "dma window"
powerpc/pseries/iommu: Make use of DDW for indirect mapping
powerpc/pseries/iommu: Find existing DDW with given property name
powerpc/pseries/iommu: Update remove_dma_window() to accept property name
powerpc/pseries/iommu: Reorganize iommu_table_setparms*() with new helper
powerpc/pseries/iommu: Add ddw_property_create() and refactor enable_ddw()
powerpc/pseries/iommu: Allow DDW windows starting at 0x00
powerpc/pseries/iommu: Add ddw_list_new_entry() helper
powerpc/pseries/iommu: Add iommu_pseries_alloc_table() helper
powerpc/kernel/iommu: Add new iommu_table_in_use() helper
powerpc/pseries/iommu: Replace hard-coded page shift
powerpc/numa: Update cpu_cpu_map on CPU online/offline
powerpc/numa: Print debug statements only when required
powerpc/numa: convert printk to pr_xxx
powerpc/numa: Drop dbg in favour of pr_debug
powerpc/smp: Enable CACHE domain for shared processor
powerpc/smp: Update cpu_core_map on all PowerPc systems
...
|
||
|
Linus Torvalds
|
14726903c8 |
Merge branch 'akpm' (patches from Andrew)
Merge misc updates from Andrew Morton: "173 patches. Subsystems affected by this series: ia64, ocfs2, block, and mm (debug, pagecache, gup, swap, shmem, memcg, selftests, pagemap, mremap, bootmem, sparsemem, vmalloc, kasan, pagealloc, memory-failure, hugetlb, userfaultfd, vmscan, compaction, mempolicy, memblock, oom-kill, migration, ksm, percpu, vmstat, and madvise)" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (173 commits) mm/madvise: add MADV_WILLNEED to process_madvise() mm/vmstat: remove unneeded return value mm/vmstat: simplify the array size calculation mm/vmstat: correct some wrong comments mm/percpu,c: remove obsolete comments of pcpu_chunk_populated() selftests: vm: add COW time test for KSM pages selftests: vm: add KSM merging time test mm: KSM: fix data type selftests: vm: add KSM merging across nodes test selftests: vm: add KSM zero page merging test selftests: vm: add KSM unmerge test selftests: vm: add KSM merge test mm/migrate: correct kernel-doc notation mm: wire up syscall process_mrelease mm: introduce process_mrelease system call memblock: make memblock_find_in_range method private mm/mempolicy.c: use in_task() in mempolicy_slab_node() mm/mempolicy: unify the create() func for bind/interleave/prefer-many policies mm/mempolicy: advertise new MPOL_PREFERRED_MANY mm/hugetlb: add support for mempolicy MPOL_PREFERRED_MANY ... |
||
Zhansaya Bagdauletkyzy
|
924a11bd16 |
selftests: vm: add COW time test for KSM pages
Since merged pages are copied every time they need to be modified, the write access time is different between shared and non-shared pages. Add ksm_cow_time() function which evaluates latency of these COW breaks. First, 4000 pages are allocated and the time, required to modify 1 byte in every other page, is measured. After this, the pages are merged into 2000 pairs and in each pair, 1 page is modified (i.e. they are decoupled) to detect COW breaks. The time needed to break COW of merged pages is then compared with performance of non-shared pages. The test is run as follows: ./ksm_tests -C The output: Total size: 15 MiB Not merged pages: Total time: 0.002185489 s Average speed: 3202.945 MiB/s Merged pages: Total time: 0.004386872 s Average speed: 1595.670 MiB/s Link: https://lkml.kernel.org/r/1d03ee0d1b341959d4b61672c6401d498bff5652.1629386192.git.zhansayabagdaulet@gmail.com Signed-off-by: Zhansaya Bagdauletkyzy <zhansayabagdaulet@gmail.com> Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com> Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Zhansaya Bagdauletkyzy
|
9e7cb94ca2 |
selftests: vm: add KSM merging time test
Patch series "add KSM performance tests", v3. Extend KSM self tests with a performance benchmark. These tests are not part of regular regression testing, as they are mainly intended to be used by developers making changes to the memory management subsystem. This patch (of 2): Add ksm_merge_time() function to determine speed and time needed for merging. The total spent time is shown in seconds while speed is in MiB/s. User must specify the size of duplicated memory area (in MiB) before running the test. The test is run as follows: ./ksm_tests -P -s 100 The output: Total size: 100 MiB Total time: 0.201106786 s Average speed: 497.248 MiB/s Link: https://lkml.kernel.org/r/cover.1629386192.git.zhansayabagdaulet@gmail.com Link: https://lkml.kernel.org/r/318b946ac80cc9205c89d0962048378f7ce0705b.1629386192.git.zhansayabagdaulet@gmail.com Signed-off-by: Zhansaya Bagdauletkyzy <zhansayabagdaulet@gmail.com> Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com> Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Zhansaya Bagdauletkyzy
|
82e717ad35 |
selftests: vm: add KSM merging across nodes test
Add check_ksm_numa_merge() function to test that pages in different NUMA nodes are being handled properly. First, two duplicate pages are allocated in two separate NUMA nodes using the libnuma library. Since there is one unique page in each node, with merge_across_nodes = 0, there won't be any shared pages. If merge_across_nodes is set to 1, the pages will be treated as usual duplicate pages and will be merged. If NUMA config is not enabled or the number of NUMA nodes is less than two, then the test is skipped. The test is run as follows: ./ksm_tests -N Link: https://lkml.kernel.org/r/071c17b5b04ebb0dfeba137acc495e5dd9d2a719.1626252248.git.zhansayabagdaulet@gmail.com Signed-off-by: Zhansaya Bagdauletkyzy <zhansayabagdaulet@gmail.com> Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com> Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com> Cc: Hugh Dickins <hughd@google.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Zhansaya Bagdauletkyzy
|
39619982c5 |
selftests: vm: add KSM zero page merging test
Add check_ksm_zero_page_merge() function to test that empty pages are being handled properly. For this, several zero pages are allocated and merged using madvise. If use_zero_pages is enabled, the pages must be shared with the special kernel zero pages; otherwise, they are merged as usual duplicate pages. The test is run as follows: ./ksm_tests -Z Link: https://lkml.kernel.org/r/6d0caab00d4bdccf5e3791cb95cf6dfd5eb85e45.1626252248.git.zhansayabagdaulet@gmail.com Signed-off-by: Zhansaya Bagdauletkyzy <zhansayabagdaulet@gmail.com> Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com> Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com> Cc: Hugh Dickins <hughd@google.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Zhansaya Bagdauletkyzy
|
a40c80e348 |
selftests: vm: add KSM unmerge test
Add check_ksm_unmerge() function to verify that KSM is properly unmerging shared pages. For this, two duplicate pages are merged first and then their contents are modified. Since they are not identical anymore, the pages must be unmerged and the number of merged pages has to be 0. The test is run as follows: ./ksm_tests -U Link: https://lkml.kernel.org/r/c0f55420440d704d5b094275b4365aa1b2ad46b5.1626252248.git.zhansayabagdaulet@gmail.com Signed-off-by: Zhansaya Bagdauletkyzy <zhansayabagdaulet@gmail.com> Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com> Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com> Cc: Hugh Dickins <hughd@google.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Zhansaya Bagdauletkyzy
|
68d6289baa |
selftests: vm: add KSM merge test
Patch series "add KSM selftests". Introduce selftests to validate the functionality of KSM. The tests are run on private anonymous pages. Since some KSM tunables are modified, their starting values are saved and restored after testing. At the start, run is set to 2 to ensure that only test pages will be merged (we assume that no applications make madvise syscalls in the background). If KSM config not enabled, all tests will be skipped. This patch (of 4): Add check_ksm_merge() function to check the basic merging feature of KSM. First, some number of identical pages are allocated and the MADV_MERGEABLE advice is given to merge these pages. Then, pages_shared and pages_sharing values are compared with the expected numbers using assert_ksm_pages_count() function. The number of pages can be changed using -p option. Link: https://lkml.kernel.org/r/cover.1626252248.git.zhansayabagdaulet@gmail.com Link: https://lkml.kernel.org/r/90287685c13300972ea84de93d1f3f900373f9fe.1626252248.git.zhansayabagdaulet@gmail.com Signed-off-by: Zhansaya Bagdauletkyzy <zhansayabagdaulet@gmail.com> Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com> Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Nadav Amit
|
4410cbb5c9 |
selftests/vm/userfaultfd: wake after copy failure
When userfaultfd copy-ioctl fails since the PTE already exists, an -EEXIST
error is returned and the faulting thread is not woken. The current
userfaultfd test does not wake the faulting thread in such case. The
assumption is presumably that another thread set the PTE through copy/wp
ioctl and would wake the faulting thread or that alternatively the fault
handler would realize there is no need to "must_wait" and continue. This
is not necessarily true.
There is an assumption that the "must_wait" tests in handle_userfault()
are sufficient to provide definitive answer whether the offending PTE is
populated or not. However, userfaultfd_must_wait() test is lockless.
Consequently, concurrent calls to ptep_modify_prot_start(), for instance,
can clear the PTE and can cause userfaultfd_must_wait() to wrongly assume
it is not populated and a wait is needed.
There are therefore 3 options:
(1) Change the tests to wake on copy failure.
(2) Wake faulting thread unconditionally on zero/copy ioctls before
returning -EEXIST.
(3) Change the userfaultfd_must_wait() to hold locks.
This patch took the first approach, but the others are valid solutions
with different tradeoffs.
Link: https://lkml.kernel.org/r/20210808020724.1022515-4-namit@vmware.com
Signed-off-by: Nadav Amit <namit@vmware.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
Christoph Hellwig
|
f358afc52c |
mm: remove flush_kernel_dcache_page
flush_kernel_dcache_page is a rather confusing interface that implements a
subset of flush_dcache_page by not being able to properly handle page
cache mapped pages.
The only callers left are in the exec code as all other previous callers
were incorrect as they could have dealt with page cache pages. Replace
the calls to flush_kernel_dcache_page with calls to flush_dcache_page,
which for all architectures does either exactly the same thing, can
contains one or more of the following:
1) an optimization to defer the cache flush for page cache pages not
mapped into userspace
2) additional flushing for mapped page cache pages if cache aliases
are possible
Link: https://lkml.kernel.org/r/20210712060928.4161649-7-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: Alex Shi <alexs@kernel.org>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Yoshinori Sato <ysato@users.osdn.me>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
Colin Ian King
|
0c52ec9513 |
selftests: Fix spelling mistake "cann't" -> "cannot"
There is a spelling mistake in an error message. Fix it. Link: https://lkml.kernel.org/r/20210826121217.12885-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Po-Hsu Lin
|
6260618e09 |
selftests/vm: use kselftest skip code for skipped tests
There are several test cases in the vm directory are still using exit 0 when they need to be skipped. Use the kselftest framework to skip code instead so it can help us to distinguish the return status. Criterion to filter out what should be fixed in vm directory: grep -r "exit 0" -B1 | grep -i skip This change might cause some false-positives if people are running these test scripts directly and only checking their return codes, which will change from 0 to 4. However I think the impact should be small as most of our scripts here are already using this skip code. And there will be no such issue if running them with the kselftest framework. Link: https://lkml.kernel.org/r/20210823073433.37653-1-po-hsu.lin@canonical.com Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Jin Yao
|
c7a3828d98 |
perf tests: Add test for PMU aliases
A perf uncore PMU may have two PMU names, a real name and an alias. Add one test case to verify that the real and alias names have the same effect. Iterate sysfs to get one event which has an alias and create an evlist by adding two evsels. Evsel1 is created by event and evsel2 is created by alias. Test asserts: evsel1->core.attr.type == evsel2->core.attr.type evsel1->core.attr.config == evsel2->core.attr.config Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Riccardo Mancini <rickyman7@gmail.com> Link: http://lore.kernel.org/lkml/20210902065955.1299-3-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Kan Liang
|
13d60ba073 |
perf pmu: Add PMU alias support
A perf uncore PMU may have two PMU names, a real name and an alias. The alias is exported at /sys/bus/event_source/devices/uncore_*/alias. The perf tool should support the alias as well. Add alias_name in the struct perf_pmu to store the alias. For the PMU which doesn't have an alias. It's NULL. Introduce two X86 specific functions to retrieve the real name and the alias separately. Only go through the sysfs to retrieve the mapping between the real name and the alias once. The result is cached in a list, uncore_pmu_list. Nothing changed for the other ARCHs. With the patch, the perf tool can monitor the PMU with either the real name or the alias. Use the real name, $ perf stat -e uncore_cha_2/event=1/ -x, 4044879584,,uncore_cha_2/event=1/,2528059205,100.00,, Use the alias, $ perf stat -e uncore_type_0_2/event=1/ -x, 3659675336,,uncore_type_0_2/event=1/,2287306455,100.00,, Committer notes: Rename 'struct perf_pmu_alias_name' to 'pmu_alias', the 'perf_' prefix should be used for libperf, things inside just tools/perf/ are being moved away from that prefix. Also 'pmu_alias' is shorter and reflects the abstraction. Also don't use 'pmu' as the name for variables for that type, we should use that for the 'struct perf_pmu' variables, avoiding confusion. Use 'pmu_alias' for 'struct pmu_alias' variables. Co-developed-by: Jin Yao <yao.jin@linux.intel.com> Co-developed-by: Arnaldo Carvalho de Melo <acme@kernel.org> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Riccardo Mancini <rickyman7@gmail.com> Link: http://lore.kernel.org/lkml/20210902065955.1299-2-yao.jin@linux.intel.com Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Suzuki K Poulose
|
c68b421d8e |
perf session: Report collisions in AUX records
Just like the other flags in the AUX records, report a summary of the Collisions if there were any. Signed-off-by: Suzuki Poulouse <suzuki.poulose@arm.com> Reviewed-by: Leo Yan <leo.yan@linaro.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org LPU-Reference: 20210728091219.527886-1-suzuki.poulose@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Stephen Brennan
|
538d9c1829 |
perf script python: Allow reporting the [un]throttle PERF_RECORD_ meta event
perf_events may sometimes throttle an event due to creating too many
samples during a given timer tick.
As of now, the perf tool will not report on throttling, which means this
is a silent error.
Implement a callback for the throttle and unthrottle events within the
Python scripting engine, which can allow scripts to detect and report
when events may have been lost due to throttling.
The simplest script to report throttle events is:
def throttle(*args):
print("throttle" + repr(args))
def unthrottle(*args):
print("unthrottle" + repr(args))
Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210901210815.133251-1-stephen.s.brennan@oracle.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
Leo Yan
|
71f7f897c3 |
perf build: Report failure for testing feature libopencsd
When build perf tool with passing option 'CORESIGHT=1' explicitly, if
the feature test fails for library libopencsd, the build doesn't
complain the feature failure and continue to build the tool with
disabling the CoreSight feature insteadly.
This patch changes the building behaviour, when build perf tool with the
option 'CORESIGHT=1' and detect the failure for testing feature
libopencsd, the build process will be aborted and it shows the complaint
info.
Committer testing:
First make sure there is no opencsd library installed:
$ rpm -qa | grep -i csd
$ sudo rm -rf `find /usr/local -name "*csd*"`
$ find /usr/local -name "*csd*"
$
Then cleanup the perf build output directory:
$ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf ;
$
And try to build explicitely asking for coresight:
$ make O=/tmp/build/perf CORESIGHT=1 O=/tmp/build/perf -C tools/perf install-bin
make: Entering directory '/var/home/acme/git/perf/tools/perf'
BUILD: Doing 'make -j24' parallel build
HOSTCC /tmp/build/perf/fixdep.o
HOSTLD /tmp/build/perf/fixdep-in.o
LINK /tmp/build/perf/fixdep
Makefile.config:493: *** Error: No libopencsd library found or the version is not up-to-date. Please install recent libopencsd to build with CORESIGHT=1. Stop.
make[1]: *** [Makefile.perf:238: sub-make] Error 2
make: *** [Makefile:113: install-bin] Error 2
make: Leaving directory '/var/home/acme/git/perf/tools/perf'
$
Now install the opencsd library present in Fedora 34:
$ sudo dnf install opencsd-devel
<SNIP>
Installed:
opencsd-1.0.0-1.fc34.x86_64 opencsd-devel-1.0.0-1.fc34.x86_64
Complete!
$
Try again building with coresight:
$ make O=/tmp/build/perf CORESIGHT=1 O=/tmp/build/perf -C tools/perf install-bin
make: Entering directory '/var/home/acme/git/perf/tools/perf'
BUILD: Doing 'make -j24' parallel build
Makefile.config:493: *** Error: No libopencsd library found or the version is not up-to-date. Please install recent libopencsd to build with CORESIGHT=1. Stop.
make[1]: *** [Makefile.perf:238: sub-make] Error 2
make: *** [Makefile:113: install-bin] Error 2
make: Leaving directory '/var/home/acme/git/perf/tools/perf'
$
Since Fedora 34 is pretty recent, one assumes we need to get it from its
upstream git repository, use rpm to find where that is:
$ rpm -q --qf "%{URL}\n" opencsd
https://github.com/Linaro/OpenCSD
$
Go there, clone the repo, build it and install into /usr/local, then try
again:
$ cd ~acme/git/perf
$ make O=/tmp/build/perf VF=1 CORESIGHT=1 O=/tmp/build/perf -C tools/perf install-bin | grep -i opencsd
... libopencsd: [ on ]
PERF_VERSION = 5.14.g454719f67a3d
$ export LD_LIBRARY_PATH=/usr/local/lib
$ ldd ~/bin/perf | grep opencsd
libopencsd_c_api.so.1 => /usr/local/lib/libopencsd_c_api.so.1 (0x00007f28f78a4000)
libopencsd.so.1 => /usr/local/lib/libopencsd.so.1 (0x00007f28f6a2e000)
$
Now it works.
Requested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Link: http://lore.kernel.org/lkml/20210902081800.550016-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
James Clark
|
a80aea64aa |
perf cs-etm: Show a warning for an unknown magic number
Currently perf reports "Cannot allocate memory" which isn't very helpful for a potentially user facing issue. If we add a new magic number in the future, perf will be able to report unrecognised magic numbers. Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: James Clark <james.clark@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: Will Deacon <will@kernel.org> Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: https //lore.kernel.org/r/20210806134109.1182235-10-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
James Clark
|
56c62f52b6 |
perf cs-etm: Print the decoder name
Use the real name of the decoder instead of hard-coding "ETM" to avoid confusion when the trace is ETE. This also now distinguishes between ETMv3 and ETMv4. Reviewed-by: Leo Yan <leo.yan@linaro.org> Reviewed-by: Suzuki Poulouse <suzuki.poulose@arm.com> Signed-off-by: James Clark <james.clark@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Will Deacon <will@kernel.org> Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: https //lore.kernel.org/r/20210806134109.1182235-9-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
James Clark
|
779f414a48 |
perf cs-etm: Create ETE decoder
If the magic number indicates ETE instantiate a OCSD_BUILTIN_DCD_ETE decoder instead of OCSD_BUILTIN_DCD_ETMV4I. ETE is the new trace feature for Armv9. Testing performed ================= * Old files with v0 and v1 headers for ETMv4 still open correctly * New files with new magic number open on new versions of perf * New files with new magic number fail to open on old versions of perf * Decoding with the ETE decoder results in the same output as the ETMv4 decoder as long as there are no new ETE packet types Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: James Clark <james.clark@arm.com> Acked-by: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Will Deacon <will@kernel.org> Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: https //lore.kernel.org/r/20210806134109.1182235-8-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
James Clark
|
212095f7ca |
perf cs-etm: Update OpenCSD decoder for ETE
OpenCSD v1.1.1 has a bug fix for the installation of the ETE decoder headers. This also means that including headers separately for each decoder is unnecessary so remove these. Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: James Clark <james.clark@arm.com> Acked-by: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Will Deacon <will@kernel.org> Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: https //lore.kernel.org/r/20210806134109.1182235-7-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
James Clark
|
050a0fc4ed |
perf cs-etm: Fix typo
TRCIRD2 should be TRCIDR2 Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: James Clark <james.clark@arm.com> Acked-by: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Will Deacon <will@kernel.org> Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: https //lore.kernel.org/r/20210806134109.1182235-6-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
James Clark
|
51ba881131 |
perf cs-etm: Save TRCDEVARCH register
When ETE is present save the TRCDEVARCH register and set a new magic number. It will be used to configure the decoder in a later commit. Old versions of perf will not be able to open files with this new magic number, but old files will still work with newer versions of perf. Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: James Clark <james.clark@arm.com> Acked-by: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Will Deacon <will@kernel.org> Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: https //lore.kernel.org/r/20210806134109.1182235-5-james.clark@arm.com [ Addressed some cosmetic suggestions by Suzuki Poulouse ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
James Clark
|
c9ccc96bf6 |
perf cs-etm: Refactor out ETMv4 header saving
Extract a function for saving the ETMv4 header because this will be used for ETE in a later commit. Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: James Clark <james.clark@arm.com> Acked-by: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Will Deacon <will@kernel.org> Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: https //lore.kernel.org/r/20210806134109.1182235-4-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
James Clark
|
f4aef1ea26 |
perf cs-etm: Initialise architecture based on TRCIDR1
Currently the architecture is hard coded as ARCH_V8, but from ETMv4.4 onwards this should be ARCH_AA64. Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: James Clark <james.clark@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: Will Deacon <will@kernel.org> Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: https //lore.kernel.org/r/20210806134109.1182235-3-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
James Clark
|
991f69e9e0 |
perf cs-etm: Refactor initialisation of decoder params.
The initialisation of the decoder params is duplicated between creation of the packet printer and packet decoder. Put them both into one function so that future changes only need to be made in one place. Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: James Clark <james.clark@arm.com> Acked-by: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Will Deacon <will@kernel.org> Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: https //lore.kernel.org/r/20210806134109.1182235-2-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Linus Torvalds
|
23852bec53 |
RDMA v5.15 merge window Pull Request
- Various cleanup and small features for rtrs
- kmap_local_page() conversions
- Driver updates and fixes for: efa, rxe, mlx5, hfi1, qed, hns
- Cache the IB subnet prefix
- Rework how CRC is calcuated in rxe
- Clean reference counting in iwpm's netlink
- Pull object allocation and lifecycle for user QPs to the uverbs core
code
- Several small hns features and continued general code cleanups
- Fix the scatterlist confusion of orig_nents/nents introduced in an
earlier patch creating the append operation
-----BEGIN PGP SIGNATURE-----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=ZwOe
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"This is quite a small cycle, no major series stands out. The HNS and
rxe drivers saw the most activity this cycle, with rxe being broken
for a good chunk of time. The significant deleted line count is due to
a SPDX cleanup series.
Summary:
- Various cleanup and small features for rtrs
- kmap_local_page() conversions
- Driver updates and fixes for: efa, rxe, mlx5, hfi1, qed, hns
- Cache the IB subnet prefix
- Rework how CRC is calcuated in rxe
- Clean reference counting in iwpm's netlink
- Pull object allocation and lifecycle for user QPs to the uverbs
core code
- Several small hns features and continued general code cleanups
- Fix the scatterlist confusion of orig_nents/nents introduced in an
earlier patch creating the append operation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (90 commits)
RDMA/mlx5: Relax DCS QP creation checks
RDMA/hns: Delete unnecessary blank lines.
RDMA/hns: Encapsulate the qp db as a function
RDMA/hns: Adjust the order in which irq are requested and enabled
RDMA/hns: Remove RST2RST error prints for hw v1
RDMA/hns: Remove dqpn filling when modify qp from Init to Init
RDMA/hns: Fix QP's resp incomplete assignment
RDMA/hns: Fix query destination qpn
RDMA/hfi1: Convert to SPDX identifier
IB/rdmavt: Convert to SPDX identifier
RDMA/hns: Bugfix for incorrect association between dip_idx and dgid
RDMA/hns: Bugfix for the missing assignment for dip_idx
RDMA/hns: Bugfix for data type of dip_idx
RDMA/hns: Fix incorrect lsn field
RDMA/irdma: Remove the repeated declaration
RDMA/core/sa_query: Retry SA queries
RDMA: Use the sg_table directly and remove the opencoded version from umem
lib/scatterlist: Fix wrong update of orig_nents
lib/scatterlist: Provide a dedicated function to support table append
RDMA/hns: Delete unused hns bitmap interface
...
|
||
|
Linus Torvalds
|
aa829778b1 |
LKMM updates:
- Update documentation and code example
KCSAN updates:
- Introduce CONFIG_KCSAN_STRICT (which RCU uses)
- Optimize use of get_ctx() by kcsan_found_watchpoint()
- Rework atomic.h into permissive.h
- Add the ability to ignore writes that change only one bit of a given data-racy variable.
- Improve comments
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=99fO
-----END PGP SIGNATURE-----
Merge tag 'locking-debug-2021-09-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull memory model updates from Ingo Molnar:
"LKMM updates:
- Update documentation and code example
KCSAN updates:
- Introduce CONFIG_KCSAN_STRICT (which RCU uses)
- Optimize use of get_ctx() by kcsan_found_watchpoint()
- Rework atomic.h into permissive.h
- Add the ability to ignore writes that change only one bit of a
given data-racy variable.
- Improve comments"
* tag 'locking-debug-2021-09-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tools/memory-model: Document data_race(READ_ONCE())
tools/memory-model: Heuristics using data_race() must handle all values
tools/memory-model: Add example for heuristic lockless reads
tools/memory-model: Make read_foo_diagnostic() more clearly diagnostic
kcsan: Make strict mode imply interruptible watchers
kcsan: permissive: Ignore data-racy 1-bit value changes
kcsan: Print if strict or non-strict during init
kcsan: Rework atomic.h into permissive.h
kcsan: Reduce get_ctx() uses in kcsan_found_watchpoint()
kcsan: Introduce CONFIG_KCSAN_STRICT
kcsan: Remove CONFIG_KCSAN_DEBUG
kcsan: Improve some Kconfig comments
|
||
|
Linus Torvalds
|
c815f04ba9 |
linux-kselftest-kunit-5.15-rc1
This KUnit update for Linux 5.15-rc1 adds new features and tests:
tool:
-- support for --kernel_args to allow setting module params
-- support for --raw_output option to show just the kunit output during
make
tests:
-- KUnit tests for checksums and timestamps
-- Print test statistics on failure
-- Integrates UBSAN into the KUnit testing framework.
It fails KUnit tests whenever it reports undefined behavior.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAmEue3EACgkQCwJExA0N
QxzbWRAAsf3NoDhYxNNN0PS9HeyYjnU8evaYWokhJW6LHyJeYkaZ9bTxx9jeAJxR
xl+ywjz5+p86ePDtAVmMeZ41PBs5MOJo//yYJays1SZYuewFpoxMn+vIsILWIN4N
Dw3cBTjNSIIPtX5Zx2xO4zU0v+LYMlw3YMYAhe1UU+yEOwnzLABN/Svi1LbMHgPy
TDUElDHiuJ+0ODxbuvTdZS5B5tV1NnHayuGNNBD3mf2I9ORxgY+myYGYtsZSMALf
LBhQVB9IfkfhwM2yUGwvjiamVxjoWXxzjnlkWgrCyw+FgqyQnkV71dmimy+3Z8Pn
LCqPGGQy8Oy4iPtbXec36D/3+tGjanwNRmlZZyBgdqXLSiUthZjGdnE2TIq/pRZR
+ZFpmz/qGOcjvTX+1i5jrDVppOOcK9ArS2Yzykt/vVlxoW/9JyTgk6MHWn3pN6Jy
GWC5H+fHsSLXcne8oel+1m8OMFZHuraxZsifkdDhKNwwWAMmTPZZzDsW+2pLtCV2
2XXplGlQ9awjypSPY9oZwz8EAgpFi41LMzfZ7wVwjTe+DaRHVe9hZhwbVN95r1+x
gaoi7I3C1b8L0ZYtcVogiyCcpXJEmTUo3+Qi6PEIOf9eHdGIZaWAb7lXQBEbBQIw
mwfR+/cQh/qe735thJ5HZD/xd2d7eQkEeV/tqXgSZsMnQc8I5E4=
=cPbp
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit updates from Shuah Khan:
"This KUnit update for Linux 5.15-rc1 adds new features and tests:
Tool:
- support for '--kernel_args' to allow setting module params
- support for '--raw_output' option to show just the kunit output
during make
Tests:
- new KUnit tests for checksums and timestamps
- Print test statistics on failure
- Integrates UBSAN into the KUnit testing framework. It fails KUnit
tests whenever it reports undefined behavior"
* tag 'linux-kselftest-kunit-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: Print test statistics on failure
kunit: tool: make --raw_output support only showing kunit output
kunit: tool: add --kernel_args to allow setting module params
kunit: ubsan integration
fat: Add KUnit tests for checksums and timestamps
|
||
Jakub Kicinski
|
025efa0a82 |
selftests: add simple GSO GRE test
Test case for commit
|