forked from Minki/linux
776c53c6a4
2639 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Mark Pearson
|
a40cd7ef22 |
platform/x86: think-lmi: Add WMI interface support on Lenovo platforms
For Lenovo platforms that support a WMI interface to the BIOS add support, using the firmware-attributes class, to allow users to access and modify various BIOS related settings. Signed-off-by: Mark Pearson <markpearson@lenovo.com> Link: https://lore.kernel.org/r/20210530223111.25929-3-markpearson@lenovo.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> |
||
Perry Yuan
|
8af9fa37b8 |
platform/x86: dell-privacy: Add support for Dell hardware privacy
add support for Dell privacy driver for the Dell units equipped hardware privacy design, which protect users privacy of audio and camera from hardware level. Once the audio or camera privacy mode activated, any applications will not get any audio or video stream when user pressed ctrl+F4 hotkey, audio privacy mode will be enabled, micmute led will be also changed accordingly The micmute led is fully controlled by hardware & EC(embedded controller) and camera mute hotkey is Ctrl+F9. Currently design only emits SW_CAMERA_LENS_COVER event while the camera lens shutter will be changed by EC & HW(hardware) control *The flow is like this: 1) User presses key. HW does stuff with this key (timeout timer is started) 2) WMI event is emitted from BIOS to kernel 3) WMI event is received by dell-privacy 4) KEY_MICMUTE emitted from dell-privacy 5) Userland picks up key and modifies kcontrol for SW mute 6) Codec kernel driver catches and calls ledtrig_audio_set 7) dell-privacy notifies EC, the timeout is cancelled and the HW mute is activated. If the EC is not notified then the HW mic mute will activate when the timeout triggers, just a bit later than with the active ack. Signed-off-by: Perry Yuan <perry_yuan@dell.com> Link: https://lore.kernel.org/r/20210506115605.1504-1-Perry_Yuan@Dell.com [hdegoede@redhat.com: Rework Kconfig/Makefile bits + other small fixups] Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> |
||
Linus Torvalds
|
a5ce4296b0 |
libnvdimm fixes for 5.13-rc2
- Fix regression in ACPI NFIT table handling leading to crashes and
driver load failures.
- Move the nvdimm mailing list
- Miscellaneous minor fixups
-----BEGIN PGP SIGNATURE-----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=UGmD
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-fixes-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:
"A regression fix for a bootup crash condition introduced in this merge
window and some other minor fixups:
- Fix regression in ACPI NFIT table handling leading to crashes and
driver load failures.
- Move the nvdimm mailing list
- Miscellaneous minor fixups"
* tag 'libnvdimm-fixes-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
ACPI: NFIT: Fix support for variable 'SPA' structure size
MAINTAINERS: Move nvdimm mailing list
tools/testing/nvdimm: Make symbol '__nfit_test_ioremap' static
libnvdimm: Remove duplicate struct declaration
|
||
Dan Williams
|
3dd4fe4b4d |
MAINTAINERS: Move nvdimm mailing list
After seeing some users have subscription management trouble, more spam than other Linux development lists, and considering some of the benefits of kernel.org hosted lists, nvdimm and persistent memory development is moving to nvdimm@lists.linux.dev. The old list will remain up until v5.14-rc1 and shutdown thereafter. Cc: Ira Weiny <ira.weiny@intel.com> Cc: Oliver O'Halloran <oohall@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Jan Kara <jack@suse.cz> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Link: https://lore.kernel.org/r/161898872871.3406469.4054282559340528393.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> |
||
Mauro Carvalho Chehab
|
6f3bceba03 |
docs: ABI: remove some spurious characters
The KernelVersion tag contains some spurious UTF-8 characters for no reason. Drop them. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/6d774ad6cb3795a177309503a39f8f1b5e309d64.1620744606.git.mchehab+huawei@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net> |
||
|
Mauro Carvalho Chehab
|
8d3926c09e |
docs: ABI: remove a meaningless UTF-8 character
Those two files have this character:
- U+00ac ('¬'): NOT SIGN
at the end of the first line, apparently for no reason. Drop them.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/6cd3f0b47568fecb7889fd18d1d744c3aaf73866.1620744606.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
||
|
Linus Torvalds
|
fc858a5231 |
Networking fixes for 5.13-rc1, including fixes from bpf, can
and netfilter trees. Self-contained fixes, nothing risky.
Current release - new code bugs:
- dsa: ksz: fix a few bugs found by static-checker in the new driver
- stmmac: fix frame preemption handshake not triggering after
interface restart
Previous releases - regressions:
- make nla_strcmp handle more then one trailing null character
- fix stack OOB reads while fragmenting IPv4 packets in openvswitch
and net/sched
- sctp: do asoc update earlier in sctp_sf_do_dupcook_a
- sctp: delay auto_asconf init until binding the first addr
- stmmac: clear receive all(RA) bit when promiscuous mode is off
- can: mcp251x: fix resume from sleep before interface was brought up
Previous releases - always broken:
- bpf: fix leakage of uninitialized bpf stack under speculation
- bpf: fix masking negation logic upon negative dst register
- netfilter: don't assume that skb_header_pointer() will never fail
- only allow init netns to set default tcp cong to a restricted algo
- xsk: fix xp_aligned_validate_desc() when len == chunk_size to
avoid false positive errors
- ethtool: fix missing NLM_F_MULTI flag when dumping
- can: m_can: m_can_tx_work_queue(): fix tx_skb race condition
- sctp: fix a SCTP_MIB_CURRESTAB leak in sctp_sf_do_dupcook_b
- bridge: fix NULL-deref caused by a races between assigning
rx_handler_data and setting the IFF_BRIDGE_PORT bit
Latecomer:
- seg6: add counters support for SRv6 Behaviors
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=JmWS
-----END PGP SIGNATURE-----
Merge tag 'net-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.13-rc1, including fixes from bpf, can and
netfilter trees. Self-contained fixes, nothing risky.
Current release - new code bugs:
- dsa: ksz: fix a few bugs found by static-checker in the new driver
- stmmac: fix frame preemption handshake not triggering after
interface restart
Previous releases - regressions:
- make nla_strcmp handle more then one trailing null character
- fix stack OOB reads while fragmenting IPv4 packets in openvswitch
and net/sched
- sctp: do asoc update earlier in sctp_sf_do_dupcook_a
- sctp: delay auto_asconf init until binding the first addr
- stmmac: clear receive all(RA) bit when promiscuous mode is off
- can: mcp251x: fix resume from sleep before interface was brought up
Previous releases - always broken:
- bpf: fix leakage of uninitialized bpf stack under speculation
- bpf: fix masking negation logic upon negative dst register
- netfilter: don't assume that skb_header_pointer() will never fail
- only allow init netns to set default tcp cong to a restricted algo
- xsk: fix xp_aligned_validate_desc() when len == chunk_size to avoid
false positive errors
- ethtool: fix missing NLM_F_MULTI flag when dumping
- can: m_can: m_can_tx_work_queue(): fix tx_skb race condition
- sctp: fix a SCTP_MIB_CURRESTAB leak in sctp_sf_do_dupcook_b
- bridge: fix NULL-deref caused by a races between assigning
rx_handler_data and setting the IFF_BRIDGE_PORT bit
Latecomer:
- seg6: add counters support for SRv6 Behaviors"
* tag 'net-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (73 commits)
atm: firestream: Use fallthrough pseudo-keyword
net: stmmac: Do not enable RX FIFO overflow interrupts
mptcp: fix splat when closing unaccepted socket
i40e: Remove LLDP frame filters
i40e: Fix PHY type identifiers for 2.5G and 5G adapters
i40e: fix the restart auto-negotiation after FEC modified
i40e: Fix use-after-free in i40e_client_subtask()
i40e: fix broken XDP support
netfilter: nftables: avoid potential overflows on 32bit arches
netfilter: nftables: avoid overflows in nft_hash_buckets()
tcp: Specify cmsgbuf is user pointer for receive zerocopy.
mlxsw: spectrum_mr: Update egress RIF list before route's action
net: ipa: fix inter-EE IRQ register definitions
can: m_can: m_can_tx_work_queue(): fix tx_skb race condition
can: mcp251x: fix resume from sleep before interface was brought up
can: mcp251xfd: mcp251xfd_probe(): add missing can_rx_offload_del() in error path
can: mcp251xfd: mcp251xfd_probe(): fix an error pointer dereference in probe
netfilter: nftables: Fix a memleak from userdata error path in new objects
netfilter: remove BUG_ON() after skb_header_pointer()
netfilter: nfnetlink_osf: Fix a missing skb_header_pointer() NULL check
...
|
||
|
Linus Torvalds
|
aef511fb91 |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov: - three new touchscreen drivers: Hycon HY46XX, ILITEK Lego Series, and MStar MSG2638 - a new driver for Azoteq IQS626A proximity and touch controller - addition of Amazon Game Controller to the list of devices handled by the xpad driver - Elan touchscreen driver will avoid binding to devices described as I2CHID compatible in ACPI tables - various driver fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (56 commits) Input: xpad - add support for Amazon Game Controller Input: ili210x - add missing negation for touch indication on ili210x MAINTAINERS: repair reference in HYCON HY46XX TOUCHSCREEN SUPPORT Input: add driver for the Hycon HY46XX touchpanel series dt-bindings: touchscreen: Add HY46XX bindings dt-bindings: Add Hycon Technology vendor prefix Input: cyttsp - flag the device properly Input: cyttsp - set abs params for ABS_MT_TOUCH_MAJOR Input: cyttsp - drop the phys path Input: cyttsp - reduce reset pulse timings Input: cyttsp - error message on boot mode exit error Input: apbps2 - remove useless variable Input: mms114 - support MMS136 Input: mms114 - convert bindings to YAML and extend Input: Add support for ILITEK Lego Series dt-bindings: input: touchscreen: ilitek_ts_i2c: Add bindings Input: add MStar MSG2638 touchscreen driver dt-bindings: input/touchscreen: add bindings for msg2638 Input: silead - add workaround for x86 BIOS-es which bring the chip up in a stuck state Input: elants_i2c - do not bind to i2c-hid compatible ACPI instantiated devices ... |
||
|
Linus Torvalds
|
a3f53e8adf |
A few late-arriving documentation fixes, including some oprofile cleanup, a
kernel-doc fix, some regression-reporting updates, and the usual minor fixes. -----BEGIN PGP SIGNATURE----- iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmCTCMoPHGNvcmJldEBs d24ubmV0AAoJEBdDWhNsDH5YsecH/jSLfUKS8BrIR8CcwG7bEl3PLQnCRe2Qc/+P aTkJf2v9WRMdNgjf6tIoYL0EqRtyDT7bL5NgsfxqX9gqTxjRdiRoT1ZvKmNFD9Zk 4vPewVEDxQkz1Odq+vh0wLWMWV+AktHWFPRZlpfqTZ7mt9l8pk55LWJNKQs5dOVZ d6w3XoE31WbQHi6CBFwTFoHeFAXnvYg+LUkeuYpaFpYIB0zvTvTThMffSWlPzsUk ADRJgUQ0TIXhPJ52Ak0y+sy24AYu/0RjUTaduoUz4eEp+toGqp21ZCXuRfPXobOG Ai42D3FgHZGaG/hIkHmpny5rRaxF6kK+pGkFQq04HW/j2BwMZac= =he/3 -----END PGP SIGNATURE----- Merge tag 'docs-5.13-2' of git://git.lwn.net/linux Pull documentation fixes from Jonathan Corbet: "A few late-arriving documentation fixes, including some oprofile cleanup, a kernel-doc fix, some regression-reporting updates, and the usual minor fixes" * tag 'docs-5.13-2' of git://git.lwn.net/linux: Enlisted oprofile version line removed oprofiled version output line removed from the list Removed the oprofiled version option docs: reporting-issues.rst: CC subsystem and maintainers on regressions docs: correct URL to bios and kernel developer's guide docs/core-api: Consistent code style docs/zh_CN: Adjust order and content of zh_CN/index.rst Documentation: input: joydev file corrections docs: Fix typo in Documentation/x86/x86_64/5level-paging.rst kernel-doc: Add support for __deprecated |
||
|
Linus Torvalds
|
8404c9fbc8 |
Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton:
"The remainder of the main mm/ queue.
143 patches.
Subsystems affected by this patch series (all mm): pagecache, hugetlb,
userfaultfd, vmscan, compaction, migration, cma, ksm, vmstat, mmap,
kconfig, util, memory-hotplug, zswap, zsmalloc, highmem, cleanups, and
kfence"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (143 commits)
kfence: use power-efficient work queue to run delayed work
kfence: maximize allocation wait timeout duration
kfence: await for allocation using wait_event
kfence: zero guard page after out-of-bounds access
mm/process_vm_access.c: remove duplicate include
mm/mempool: minor coding style tweaks
mm/highmem.c: fix coding style issue
btrfs: use memzero_page() instead of open coded kmap pattern
iov_iter: lift memzero_page() to highmem.h
mm/zsmalloc: use BUG_ON instead of if condition followed by BUG.
mm/zswap.c: switch from strlcpy to strscpy
arm64/Kconfig: introduce ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE
x86/Kconfig: introduce ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE
mm,memory_hotplug: add kernel boot option to enable memmap_on_memory
acpi,memhotplug: enable MHP_MEMMAP_ON_MEMORY when supported
mm,memory_hotplug: allocate memmap from the added memory range
mm,memory_hotplug: factor out adjusting present pages into adjust_present_page_count()
mm,memory_hotplug: relax fully spanned sections check
drivers/base/memory: introduce memory_block_{online,offline}
mm/memory_hotplug: remove broken locking of zone PCP structures during hot remove
...
|
||
Minchan Kim
|
43ca106fa8 |
mm: cma: support sysfs
Since CMA is getting used more widely, it's more important to keep monitoring CMA statistics for system health since it's directly related to user experience. This patch introduces sysfs statistics for CMA, in order to provide some basic monitoring of the CMA allocator. * the number of CMA page successful allocations * the number of CMA page allocation failures These two values allow the user to calcuate the allocation failure rate for each CMA area. e.g.) /sys/kernel/mm/cma/WIFI/alloc_pages_[success|fail] /sys/kernel/mm/cma/SENSOR/alloc_pages_[success|fail] /sys/kernel/mm/cma/BLUETOOTH/alloc_pages_[success|fail] The cma_stat was intentionally allocated by dynamic allocation to harmonize with kobject lifetime management. https://lore.kernel.org/linux-mm/YCOAmXqt6dZkCQYs@kroah.com/ Link: https://lkml.kernel.org/r/20210324230759.2213957-1-minchan@kernel.org Link: https://lore.kernel.org/linux-mm/20210316100433.17665-1-colin.king@canonical.com/ Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Colin Ian King <colin.king@canonical.com> Tested-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Tested-by: Anders Roxell <anders.roxell@linaro.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: John Dias <joaodias@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Colin Ian King <colin.king@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
d0195c7d7a |
f2fs-for-5.13-rc1
In this round, we added a new mount option, "checkpoint_merge", which introduces a kernel thread dealing with the f2fs checkpoints. Once we start to manage the IO priority along with blk-cgroup, the checkpoint operation can be processed in a lower priority under the process context. Since the checkpoint holds all the filesystem operations, we give a higher priority to the checkpoint thread all the time. Enhancement: - introduce gc_merge mount option to introduce a checkpoint thread - improve to run discard thread efficiently - allow modular compression algorithms - expose # of overprivision segments to sysfs - expose runtime compression stat to sysfs Bug fix: - fix OOB memory access by the node id lookup - avoid touching checkpointed data in the checkpoint-disabled mode - fix the resizing flow to avoid kernel panic and race conditions - fix block allocation issues on pinned files - address some swapfile issues - fix hugtask problem and kernel panic during atomic write operations - don't start checkpoint thread in RO And, we've cleaned up some kernel coding style and build warnings. In addition, we fixed some minor race conditions and error handling routines. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE00UqedjCtOrGVvQiQBSofoJIUNIFAmCQhVIACgkQQBSofoJI UNIggA/8DZINzFLMCj6+6P5wNAWj3nYtx/FnwZ7C31f8qkiZjgA4LfONUnDvV7sU GS8MuLQz4eTYfqU2rVgGiSm+aCkEOovnk7C7Huo7pezgqYb+5J6ACXsqdU3dcD5M kShJMqLKcTKqtOMbnJrdGvmw1/ysuAi7UhSSgVV+9NQxlhxADnagOGbQ7lXNSV3R spGMWazGY2uA5DFCCa4lMX79lyFATCzEKB3SKAW5r+8QSmxJY8ViK2Er7AnvwRJz XJ/QJ8ALNb/GGyHzBWFv3P6Yxo/G3FkUvTIc5Rhi9P2lUgjI2NALokj7AOnfNh4a uSXHVlNrrfH+gpx9xr5z8MUmroCYCCOJ6EhnVweqViRmekY8jSb2HxmUtDTIf19U LWl3gtD2GDQx6CY0a0K58Oa2Lp0Bp9MWUdPA/4P21EymZwXum7aCkhV+DnigcoCj yCmKlI8nIpCS97dIO/7MsnG6Tu/7c+Prytd2ezUo+6hlkXPZk8shs+elnjlWu/6V 3ZpSWKzQsPJL8U7eB9H04AxEokrrXm3fRhR86C7JdkEe0gyGFf3dB/G+jqzcNi5m ZpxiCeZ8RbNmPpnH8NWeYHk9uDKMOXuUPFYDoaOwImNWfqj0jfhiTxHo4MyBLAuk MT632ICcuJLvwgnSbMAI3U7v6+dZXKH4y6U7IHFjxhI7beMzxmI= =P5uk -----END PGP SIGNATURE----- Merge tag 'f2fs-for-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs Pull f2fs updates from Jaegeuk Kim: "In this round, we added a new mount option, "checkpoint_merge", which introduces a kernel thread dealing with the f2fs checkpoints. Once we start to manage the IO priority along with blk-cgroup, the checkpoint operation can be processed in a lower priority under the process context. Since the checkpoint holds all the filesystem operations, we give a higher priority to the checkpoint thread all the time. Enhancements: - introduce gc_merge mount option to introduce a checkpoint thread - improve to run discard thread efficiently - allow modular compression algorithms - expose # of overprivision segments to sysfs - expose runtime compression stat to sysfs Bug fixes: - fix OOB memory access by the node id lookup - avoid touching checkpointed data in the checkpoint-disabled mode - fix the resizing flow to avoid kernel panic and race conditions - fix block allocation issues on pinned files - address some swapfile issues - fix hugtask problem and kernel panic during atomic write operations - don't start checkpoint thread in RO And, we've cleaned up some kernel coding style and build warnings. In addition, we fixed some minor race conditions and error handling routines" * tag 'f2fs-for-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (48 commits) f2fs: drop inplace IO if fs status is abnormal f2fs: compress: remove unneed check condition f2fs: clean up left deprecated IO trace codes f2fs: avoid using native allocate_segment_by_default() f2fs: remove unnecessary struct declaration f2fs: fix to avoid NULL pointer dereference f2fs: avoid duplicated codes for cleanup f2fs: document: add description about compressed space handling f2fs: clean up build warnings f2fs: fix the periodic wakeups of discard thread f2fs: fix to avoid accessing invalid fio in f2fs_allocate_data_block() f2fs: fix to avoid GC/mmap race with f2fs_truncate() f2fs: set checkpoint_merge by default f2fs: Fix a hungtask problem in atomic write f2fs: fix to restrict mount condition on readonly block device f2fs: introduce gc_merge mount option f2fs: fix to cover __allocate_new_section() with curseg_lock f2fs: fix wrong alloc_type in f2fs_do_replace_block f2fs: delete empty compress.h f2fs: fix a typo in inode.c ... |
||
|
Linus Torvalds
|
e4adffb8da |
dmaengine updates for v5.13-rc1
New drivers/devices
- Support for QCOM SM8150 GPI DMA
Updates:
- Big pile of idxd updates including support for performance monitoring
- Support in dw-edma for interleaved dma
- Support for synchronize() in Xilinx driver
-----BEGIN PGP SIGNATURE-----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=Jjb4
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"New drivers/devices:
- Support for QCOM SM8150 GPI DMA
Updates:
- Big pile of idxd updates including support for performance
monitoring
- Support in dw-edma for interleaved dma
- Support for synchronize() in Xilinx driver"
* tag 'dmaengine-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (42 commits)
dmaengine: idxd: Enable IDXD performance monitor support
dmaengine: idxd: Add IDXD performance monitor support
dmaengine: idxd: remove MSIX masking for interrupt handlers
dmaengine: idxd: device cmd should use dedicated lock
dmaengine: idxd: support reporting of halt interrupt
dmaengine: idxd: enable SVA feature for IOMMU
dmaengine: idxd: convert sprintf() to sysfs_emit() for all usages
dmaengine: idxd: add interrupt handle request and release support
dmaengine: idxd: add support for readonly config mode
dmaengine: idxd: add percpu_ref to descriptor submission path
dmaengine: idxd: remove detection of device type
dmaengine: idxd: iax bus removal
dmaengine: idxd: fix cdev setup and free device lifetime issues
dmaengine: idxd: fix group conf_dev lifetime
dmaengine: idxd: fix engine conf_dev lifetime
dmaengine: idxd: fix wq conf_dev 'struct device' lifetime
dmaengine: idxd: fix idxd conf_dev 'struct device' lifetime
dmaengine: idxd: use ida for device instance enumeration
dmaengine: idxd: removal of pcim managed mmio mapping
dmaengine: idxd: cleanup pci interrupt vector allocation management
...
|
||
Anatoly Pugachev
|
2fa4928aed |
docs: correct URL to bios and kernel developer's guide
correct URL to bios and kernel developer's guide on amd.com site Signed-off-by: Anatoly Pugachev <matorola@gmail.com> Link: https://lore.kernel.org/r/20210428104851.GA10572@u164.east.ru [jc: fixed resulting sphinx warning] Signed-off-by: Jonathan Corbet <corbet@lwn.net> |
||
Daniele Palmas
|
bd1af6b5ff |
Documentation: ABI: sysfs-class-net-qmi: document pass-through file
Add documentation for /sys/class/net/<iface>/qmi/pass_through Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Linus Torvalds
|
152d32aa84 |
ARM:
- Stage-2 isolation for the host kernel when running in protected mode
- Guest SVE support when running in nVHE mode
- Force W^X hypervisor mappings in nVHE mode
- ITS save/restore for guests using direct injection with GICv4.1
- nVHE panics now produce readable backtraces
- Guest support for PTP using the ptp_kvm driver
- Performance improvements in the S2 fault handler
x86:
- Optimizations and cleanup of nested SVM code
- AMD: Support for virtual SPEC_CTRL
- Optimizations of the new MMU code: fast invalidation,
zap under read lock, enable/disably dirty page logging under
read lock
- /dev/kvm API for AMD SEV live migration (guest API coming soon)
- support SEV virtual machines sharing the same encryption context
- support SGX in virtual machines
- add a few more statistics
- improved directed yield heuristics
- Lots and lots of cleanups
Generic:
- Rework of MMU notifier interface, simplifying and optimizing
the architecture-specific code
- Some selftests improvements
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmCJ13kUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroM1HAgAqzPxEtiTPTFeFJV5cnPPJ3dFoFDK
y/juZJUQ1AOtvuWzzwuf175ewkv9vfmtG6rVohpNSkUlJYeoc6tw7n8BTTzCVC1b
c/4Dnrjeycr6cskYlzaPyV6MSgjSv5gfyj1LA5UEM16LDyekmaynosVWY5wJhju+
Bnyid8l8Utgz+TLLYogfQJQECCrsU0Wm//n+8TWQgLf1uuiwshU5JJe7b43diJrY
+2DX+8p9yWXCTz62sCeDWNahUv8AbXpMeJ8uqZPYcN1P0gSEUGu8xKmLOFf9kR7b
M4U1Gyz8QQbjd2lqnwiWIkvRLX6gyGVbq2zH0QbhUe5gg3qGUX7JjrhdDQ==
=AXUi
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"This is a large update by KVM standards, including AMD PSP (Platform
Security Processor, aka "AMD Secure Technology") and ARM CoreSight
(debug and trace) changes.
ARM:
- CoreSight: Add support for ETE and TRBE
- Stage-2 isolation for the host kernel when running in protected
mode
- Guest SVE support when running in nVHE mode
- Force W^X hypervisor mappings in nVHE mode
- ITS save/restore for guests using direct injection with GICv4.1
- nVHE panics now produce readable backtraces
- Guest support for PTP using the ptp_kvm driver
- Performance improvements in the S2 fault handler
x86:
- AMD PSP driver changes
- Optimizations and cleanup of nested SVM code
- AMD: Support for virtual SPEC_CTRL
- Optimizations of the new MMU code: fast invalidation, zap under
read lock, enable/disably dirty page logging under read lock
- /dev/kvm API for AMD SEV live migration (guest API coming soon)
- support SEV virtual machines sharing the same encryption context
- support SGX in virtual machines
- add a few more statistics
- improved directed yield heuristics
- Lots and lots of cleanups
Generic:
- Rework of MMU notifier interface, simplifying and optimizing the
architecture-specific code
- a handful of "Get rid of oprofile leftovers" patches
- Some selftests improvements"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (379 commits)
KVM: selftests: Speed up set_memory_region_test
selftests: kvm: Fix the check of return value
KVM: x86: Take advantage of kvm_arch_dy_has_pending_interrupt()
KVM: SVM: Skip SEV cache flush if no ASIDs have been used
KVM: SVM: Remove an unnecessary prototype declaration of sev_flush_asids()
KVM: SVM: Drop redundant svm_sev_enabled() helper
KVM: SVM: Move SEV VMCB tracking allocation to sev.c
KVM: SVM: Explicitly check max SEV ASID during sev_hardware_setup()
KVM: SVM: Unconditionally invoke sev_hardware_teardown()
KVM: SVM: Enable SEV/SEV-ES functionality by default (when supported)
KVM: SVM: Condition sev_enabled and sev_es_enabled on CONFIG_KVM_AMD_SEV=y
KVM: SVM: Append "_enabled" to module-scoped SEV/SEV-ES control variables
KVM: SEV: Mask CPUID[0x8000001F].eax according to supported features
KVM: SVM: Move SEV module params/variables to sev.c
KVM: SVM: Disable SEV/SEV-ES if NPT is disabled
KVM: SVM: Free sev_asid_bitmap during init if SEV setup fails
KVM: SVM: Zero out the VMCB array used to track SEV ASID association
x86/sev: Drop redundant and potentially misleading 'sev_enabled'
KVM: x86: Move reverse CPUID helpers to separate header file
KVM: x86: Rename GPR accessors to make mode-aware variants the defaults
...
|
||
|
Linus Torvalds
|
f34b2cf178 |
RDMA merge window pull request
This is significantly bug fixes and general cleanups. The noteworthy new
features are fairly small:
- XRC support for HNS and improves RQ operations
- Bug fixes and updates for hns, mlx5, bnxt_re, hfi1, i40iw, rxe, siw and
qib
- Quite a few general cleanups on spelling, error handling, static checker
detections, etc
- Increase the number of device ports supported beyond 255. High port
count software switches now exist
- Several bug fixes for rtrs
- mlx5 Device Memory support for host controlled atomics
- Report SRQ tables through to rdma-tool
-----BEGIN PGP SIGNATURE-----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=vsXA
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"This is significantly bug fixes and general cleanups. The noteworthy
new features are fairly small:
- XRC support for HNS and improves RQ operations
- Bug fixes and updates for hns, mlx5, bnxt_re, hfi1, i40iw, rxe, siw
and qib
- Quite a few general cleanups on spelling, error handling, static
checker detections, etc
- Increase the number of device ports supported beyond 255. High port
count software switches now exist
- Several bug fixes for rtrs
- mlx5 Device Memory support for host controlled atomics
- Report SRQ tables through to rdma-tool"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (145 commits)
IB/qib: Remove redundant assignment to ret
RDMA/nldev: Add copy-on-fork attribute to get sys command
RDMA/bnxt_re: Fix a double free in bnxt_qplib_alloc_res
RDMA/siw: Fix a use after free in siw_alloc_mr
IB/hfi1: Remove redundant variable rcd
RDMA/nldev: Add QP numbers to SRQ information
RDMA/nldev: Return SRQ information
RDMA/restrack: Add support to get resource tracking for SRQ
RDMA/nldev: Return context information
RDMA/core: Add CM to restrack after successful attachment to a device
RDMA/cma: Skip device which doesn't support CM
RDMA/rxe: Fix a bug in rxe_fill_ip_info()
RDMA/mlx5: Expose private query port
RDMA/mlx4: Remove an unused variable
RDMA/mlx5: Fix type assignment for ICM DM
IB/mlx5: Set right RoCE l3 type and roce version while deleting GID
RDMA/i40iw: Fix error unwinding when i40iw_hmc_sd_one fails
RDMA/cxgb4: add missing qpid increment
IB/ipoib: Remove unnecessary struct declaration
RDMA/bnxt_re: Get rid of custom module reference counting
...
|
||
|
Linus Torvalds
|
9d31d23389 |
Networking changes for 5.13.
Core:
- bpf:
- allow bpf programs calling kernel functions (initially to
reuse TCP congestion control implementations)
- enable task local storage for tracing programs - remove the
need to store per-task state in hash maps, and allow tracing
programs access to task local storage previously added for
BPF_LSM
- add bpf_for_each_map_elem() helper, allowing programs to
walk all map elements in a more robust and easier to verify
fashion
- sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT
redirection
- lpm: add support for batched ops in LPM trie
- add BTF_KIND_FLOAT support - mostly to allow use of BTF
on s390 which has floats in its headers files
- improve BPF syscall documentation and extend the use of kdoc
parsing scripts we already employ for bpf-helpers
- libbpf, bpftool: support static linking of BPF ELF files
- improve support for encapsulation of L2 packets
- xdp: restructure redirect actions to avoid a runtime lookup,
improving performance by 4-8% in microbenchmarks
- xsk: build skb by page (aka generic zerocopy xmit) - improve
performance of software AF_XDP path by 33% for devices
which don't need headers in the linear skb part (e.g. virtio)
- nexthop: resilient next-hop groups - improve path stability
on next-hops group changes (incl. offload for mlxsw)
- ipv6: segment routing: add support for IPv4 decapsulation
- icmp: add support for RFC 8335 extended PROBE messages
- inet: use bigger hash table for IP ID generation
- tcp: deal better with delayed TX completions - make sure we don't
give up on fast TCP retransmissions only because driver is
slow in reporting that it completed transmitting the original
- tcp: reorder tcp_congestion_ops for better cache locality
- mptcp:
- add sockopt support for common TCP options
- add support for common TCP msg flags
- include multiple address ids in RM_ADDR
- add reset option support for resetting one subflow
- udp: GRO L4 improvements - improve 'forward' / 'frag_list'
co-existence with UDP tunnel GRO, allowing the first to take
place correctly even for encapsulated UDP traffic
- micro-optimize dev_gro_receive() and flow dissection, avoid
retpoline overhead on VLAN and TEB GRO
- use less memory for sysctls, add a new sysctl type, to allow using
u8 instead of "int" and "long" and shrink networking sysctls
- veth: allow GRO without XDP - this allows aggregating UDP
packets before handing them off to routing, bridge, OvS, etc.
- allow specifing ifindex when device is moved to another namespace
- netfilter:
- nft_socket: add support for cgroupsv2
- nftables: add catch-all set element - special element used
to define a default action in case normal lookup missed
- use net_generic infra in many modules to avoid allocating
per-ns memory unnecessarily
- xps: improve the xps handling to avoid potential out-of-bound
accesses and use-after-free when XPS change race with other
re-configuration under traffic
- add a config knob to turn off per-cpu netdev refcnt to catch
underflows in testing
Device APIs:
- add WWAN subsystem to organize the WWAN interfaces better and
hopefully start driving towards more unified and vendor-
-independent APIs
- ethtool:
- add interface for reading IEEE MIB stats (incl. mlx5 and
bnxt support)
- allow network drivers to dump arbitrary SFP EEPROM data,
current offset+length API was a poor fit for modern SFP
which define EEPROM in terms of pages (incl. mlx5 support)
- act_police, flow_offload: add support for packet-per-second
policing (incl. offload for nfp)
- psample: add additional metadata attributes like transit delay
for packets sampled from switch HW (and corresponding egress
and policy-based sampling in the mlxsw driver)
- dsa: improve support for sandwiched LAGs with bridge and DSA
- netfilter:
- flowtable: use direct xmit in topologies with IP
forwarding, bridging, vlans etc.
- nftables: counter hardware offload support
- Bluetooth:
- improvements for firmware download w/ Intel devices
- add support for reading AOSP vendor capabilities
- add support for virtio transport driver
- mac80211:
- allow concurrent monitor iface and ethernet rx decap
- set priority and queue mapping for injected frames
- phy: add support for Clause-45 PHY Loopback
- pci/iov: add sysfs MSI-X vector assignment interface
to distribute MSI-X resources to VFs (incl. mlx5 support)
New hardware/drivers:
- dsa: mv88e6xxx: add support for Marvell mv88e6393x -
11-port Ethernet switch with 8x 1-Gigabit Ethernet
and 3x 10-Gigabit interfaces.
- dsa: support for legacy Broadcom tags used on BCM5325, BCM5365
and BCM63xx switches
- Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches
- ath11k: support for QCN9074 a 802.11ax device
- Bluetooth: Broadcom BCM4330 and BMC4334
- phy: Marvell 88X2222 transceiver support
- mdio: add BCM6368 MDIO mux bus controller
- r8152: support RTL8153 and RTL8156 (USB Ethernet) chips
- mana: driver for Microsoft Azure Network Adapter (MANA)
- Actions Semi Owl Ethernet MAC
- can: driver for ETAS ES58X CAN/USB interfaces
Pure driver changes:
- add XDP support to: enetc, igc, stmmac
- add AF_XDP support to: stmmac
- virtio:
- page_to_skb() use build_skb when there's sufficient tailroom
(21% improvement for 1000B UDP frames)
- support XDP even without dedicated Tx queues - share the Tx
queues with the stack when necessary
- mlx5:
- flow rules: add support for mirroring with conntrack,
matching on ICMP, GTP, flex filters and more
- support packet sampling with flow offloads
- persist uplink representor netdev across eswitch mode
changes
- allow coexistence of CQE compression and HW time-stamping
- add ethtool extended link error state reporting
- ice, iavf: support flow filters, UDP Segmentation Offload
- dpaa2-switch:
- move the driver out of staging
- add spanning tree (STP) support
- add rx copybreak support
- add tc flower hardware offload on ingress traffic
- ionic:
- implement Rx page reuse
- support HW PTP time-stamping
- octeon: support TC hardware offloads - flower matching on ingress
and egress ratelimitting.
- stmmac:
- add RX frame steering based on VLAN priority in tc flower
- support frame preemption (FPE)
- intel: add cross time-stamping freq difference adjustment
- ocelot:
- support forwarding of MRP frames in HW
- support multiple bridges
- support PTP Sync one-step timestamping
- dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like
learning, flooding etc.
- ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350,
SC7280 SoCs)
- mt7601u: enable TDLS support
- mt76:
- add support for 802.3 rx frames (mt7915/mt7615)
- mt7915 flash pre-calibration support
- mt7921/mt7663 runtime power management fixes
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=vcbA
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- bpf:
- allow bpf programs calling kernel functions (initially to
reuse TCP congestion control implementations)
- enable task local storage for tracing programs - remove the
need to store per-task state in hash maps, and allow tracing
programs access to task local storage previously added for
BPF_LSM
- add bpf_for_each_map_elem() helper, allowing programs to walk
all map elements in a more robust and easier to verify fashion
- sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT
redirection
- lpm: add support for batched ops in LPM trie
- add BTF_KIND_FLOAT support - mostly to allow use of BTF on
s390 which has floats in its headers files
- improve BPF syscall documentation and extend the use of kdoc
parsing scripts we already employ for bpf-helpers
- libbpf, bpftool: support static linking of BPF ELF files
- improve support for encapsulation of L2 packets
- xdp: restructure redirect actions to avoid a runtime lookup,
improving performance by 4-8% in microbenchmarks
- xsk: build skb by page (aka generic zerocopy xmit) - improve
performance of software AF_XDP path by 33% for devices which don't
need headers in the linear skb part (e.g. virtio)
- nexthop: resilient next-hop groups - improve path stability on
next-hops group changes (incl. offload for mlxsw)
- ipv6: segment routing: add support for IPv4 decapsulation
- icmp: add support for RFC 8335 extended PROBE messages
- inet: use bigger hash table for IP ID generation
- tcp: deal better with delayed TX completions - make sure we don't
give up on fast TCP retransmissions only because driver is slow in
reporting that it completed transmitting the original
- tcp: reorder tcp_congestion_ops for better cache locality
- mptcp:
- add sockopt support for common TCP options
- add support for common TCP msg flags
- include multiple address ids in RM_ADDR
- add reset option support for resetting one subflow
- udp: GRO L4 improvements - improve 'forward' / 'frag_list'
co-existence with UDP tunnel GRO, allowing the first to take place
correctly even for encapsulated UDP traffic
- micro-optimize dev_gro_receive() and flow dissection, avoid
retpoline overhead on VLAN and TEB GRO
- use less memory for sysctls, add a new sysctl type, to allow using
u8 instead of "int" and "long" and shrink networking sysctls
- veth: allow GRO without XDP - this allows aggregating UDP packets
before handing them off to routing, bridge, OvS, etc.
- allow specifing ifindex when device is moved to another namespace
- netfilter:
- nft_socket: add support for cgroupsv2
- nftables: add catch-all set element - special element used to
define a default action in case normal lookup missed
- use net_generic infra in many modules to avoid allocating
per-ns memory unnecessarily
- xps: improve the xps handling to avoid potential out-of-bound
accesses and use-after-free when XPS change race with other
re-configuration under traffic
- add a config knob to turn off per-cpu netdev refcnt to catch
underflows in testing
Device APIs:
- add WWAN subsystem to organize the WWAN interfaces better and
hopefully start driving towards more unified and vendor-
independent APIs
- ethtool:
- add interface for reading IEEE MIB stats (incl. mlx5 and bnxt
support)
- allow network drivers to dump arbitrary SFP EEPROM data,
current offset+length API was a poor fit for modern SFP which
define EEPROM in terms of pages (incl. mlx5 support)
- act_police, flow_offload: add support for packet-per-second
policing (incl. offload for nfp)
- psample: add additional metadata attributes like transit delay for
packets sampled from switch HW (and corresponding egress and
policy-based sampling in the mlxsw driver)
- dsa: improve support for sandwiched LAGs with bridge and DSA
- netfilter:
- flowtable: use direct xmit in topologies with IP forwarding,
bridging, vlans etc.
- nftables: counter hardware offload support
- Bluetooth:
- improvements for firmware download w/ Intel devices
- add support for reading AOSP vendor capabilities
- add support for virtio transport driver
- mac80211:
- allow concurrent monitor iface and ethernet rx decap
- set priority and queue mapping for injected frames
- phy: add support for Clause-45 PHY Loopback
- pci/iov: add sysfs MSI-X vector assignment interface to distribute
MSI-X resources to VFs (incl. mlx5 support)
New hardware/drivers:
- dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port
Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit
interfaces.
- dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and
BCM63xx switches
- Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches
- ath11k: support for QCN9074 a 802.11ax device
- Bluetooth: Broadcom BCM4330 and BMC4334
- phy: Marvell 88X2222 transceiver support
- mdio: add BCM6368 MDIO mux bus controller
- r8152: support RTL8153 and RTL8156 (USB Ethernet) chips
- mana: driver for Microsoft Azure Network Adapter (MANA)
- Actions Semi Owl Ethernet MAC
- can: driver for ETAS ES58X CAN/USB interfaces
Pure driver changes:
- add XDP support to: enetc, igc, stmmac
- add AF_XDP support to: stmmac
- virtio:
- page_to_skb() use build_skb when there's sufficient tailroom
(21% improvement for 1000B UDP frames)
- support XDP even without dedicated Tx queues - share the Tx
queues with the stack when necessary
- mlx5:
- flow rules: add support for mirroring with conntrack, matching
on ICMP, GTP, flex filters and more
- support packet sampling with flow offloads
- persist uplink representor netdev across eswitch mode changes
- allow coexistence of CQE compression and HW time-stamping
- add ethtool extended link error state reporting
- ice, iavf: support flow filters, UDP Segmentation Offload
- dpaa2-switch:
- move the driver out of staging
- add spanning tree (STP) support
- add rx copybreak support
- add tc flower hardware offload on ingress traffic
- ionic:
- implement Rx page reuse
- support HW PTP time-stamping
- octeon: support TC hardware offloads - flower matching on ingress
and egress ratelimitting.
- stmmac:
- add RX frame steering based on VLAN priority in tc flower
- support frame preemption (FPE)
- intel: add cross time-stamping freq difference adjustment
- ocelot:
- support forwarding of MRP frames in HW
- support multiple bridges
- support PTP Sync one-step timestamping
- dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like
learning, flooding etc.
- ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350,
SC7280 SoCs)
- mt7601u: enable TDLS support
- mt76:
- add support for 802.3 rx frames (mt7915/mt7615)
- mt7915 flash pre-calibration support
- mt7921/mt7663 runtime power management fixes"
* tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2451 commits)
net: selftest: fix build issue if INET is disabled
net: netrom: nr_in: Remove redundant assignment to ns
net: tun: Remove redundant assignment to ret
net: phy: marvell: add downshift support for M88E1240
net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255
net/sched: act_ct: Remove redundant ct get and check
icmp: standardize naming of RFC 8335 PROBE constants
bpf, selftests: Update array map tests for per-cpu batched ops
bpf: Add batched ops support for percpu array
bpf: Implement formatted output helpers with bstr_printf
seq_file: Add a seq_bprintf function
sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues
net:nfc:digital: Fix a double free in digital_tg_recv_dep_req
net: fix a concurrency bug in l2tp_tunnel_register()
net/smc: Remove redundant assignment to rc
mpls: Remove redundant assignment to err
llc2: Remove redundant assignment to rc
net/tls: Remove redundant initialization of record
rds: Remove redundant assignment to nr_sig
dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0
...
|
||
|
Linus Torvalds
|
5a69e9bce9 |
power supply and reset changes for the v5.13 series
battery/charger driver changes:
* core: provide function stubs if CONFIG_POWER_SUPPLY=n
* core: reduce loglevel for probe defer info
* surface-battery: new battery driver for Surface
* surface-charger: new charger driver for Surface
* bq27xxx: add bq78z100 support
* bq27xxx: fix current_now/power_avg for newer chips
* cw2015: add CHARGE_NOW support
* ab8500: drop pdata support
* convert most DT bindings to YAML
* lot's of minor fixes and cleanups
reset drivers:
* ltc2952-poweroff: make trigger delay configurable from DT
* minor fixes and cleanups
-----BEGIN PGP SIGNATURE-----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=9IUN
-----END PGP SIGNATURE-----
Merge tag 'for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"battery/charger driver changes:
- core:
- provide function stubs if CONFIG_POWER_SUPPLY=n
- reduce loglevel for probe defer info
- surface:
- new battery and charger drivers for Surface
- bq27xxx:
- add bq78z100 support
- fix current_now/power_avg for newer chips
- cw2015:
- add CHARGE_NOW support
- ab8500:
- drop pdata support
- convert most DT bindings to YAML
- lots of minor fixes and cleanups
reset drivers:
- ltc2952-poweroff:
- make trigger delay configurable from DT
- minor fixes and cleanups"
* tag 'for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (97 commits)
power: supply: cpcap-battery: fix invalid usage of list cursor
power: supply: bq256xx: add kerneldoc for structure members
power: supply: act8945a: correct kerneldoc
power: supply: max17040: remove unneeded double cast
power: supply: max17040: handle device_property_read_u8_array() failure
power: supply: max14577: remove unneeded variable initialization
power: supply: surface-charger: Make symbol 'surface_ac_pm_ops' static
power: supply: surface-battery: Make some symbols static
power: reset: restart-poweroff: Add missing MODULE_DEVICE_TABLE
power: reset: hisi-reboot: add missing MODULE_DEVICE_TABLE
power: supply: s3c_adc_battery: fix possible use-after-free in s3c_adc_bat_remove()
power: supply: generic-adc-battery: fix possible use-after-free in gab_remove()
power: supply: Add AC driver for Surface Aggregator Module
power: supply: Add battery driver for Surface Aggregator Module
power: supply: bq25980: Move props from battery node
power: supply: core: Use true and false for bool variable
power: supply: goldfish: Remove the GOLDFISH dependency
power: reset: ltc2952: make trigger delay configurable
power: supply: cpcap-charger: Simplify bool conversion
power: supply: cpcap-charger: Add usleep to cpcap charger to avoid usb plug bounce
...
|
||
|
Linus Torvalds
|
fc05860628 |
for-5.13/drivers-2021-04-27
-----BEGIN PGP SIGNATURE-----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=c0x4
-----END PGP SIGNATURE-----
Merge tag 'for-5.13/drivers-2021-04-27' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
- MD changes via Song:
- raid5 POWER fix
- raid1 failure fix
- UAF fix for md cluster
- mddev_find_or_alloc() clean up
- Fix NULL pointer deref with external bitmap
- Performance improvement for raid10 discard requests
- Fix missing information of /proc/mdstat
- rsxx const qualifier removal (Arnd)
- Expose allocated brd pages (Calvin)
- rnbd via Gioh Kim:
- Change maintainer
- Change domain address of maintainers' email
- Add polling IO mode and document update
- Fix memory leak and some bug detected by static code analysis
tools
- Code refactoring
- Series of floppy cleanups/fixes (Denis)
- s390 dasd fixes (Julian)
- kerneldoc fixes (Lee)
- null_blk double free (Lv)
- null_blk virtual boundary addition (Max)
- Remove xsysace driver (Michal)
- umem driver removal (Davidlohr)
- ataflop fixes (Dan)
- Revalidate disk removal (Christoph)
- Bounce buffer cleanups (Christoph)
- Mark lightnvm as deprecated (Christoph)
- mtip32xx init cleanups (Shixin)
- Various fixes (Tian, Gustavo, Coly, Yang, Zhang, Zhiqiang)
* tag 'for-5.13/drivers-2021-04-27' of git://git.kernel.dk/linux-block: (143 commits)
async_xor: increase src_offs when dropping destination page
drivers/block/null_blk/main: Fix a double free in null_init.
md/raid1: properly indicate failure when ending a failed write request
md-cluster: fix use-after-free issue when removing rdev
nvme: introduce generic per-namespace chardev
nvme: cleanup nvme_configure_apst
nvme: do not try to reconfigure APST when the controller is not live
nvme: add 'kato' sysfs attribute
nvme: sanitize KATO setting
nvmet: avoid queuing keep-alive timer if it is disabled
brd: expose number of allocated pages in debugfs
ataflop: fix off by one in ataflop_probe()
ataflop: potential out of bounds in do_format()
drbd: Fix fall-through warnings for Clang
block/rnbd: Use strscpy instead of strlcpy
block/rnbd-clt-sysfs: Remove copy buffer overlap in rnbd_clt_get_path_name
block/rnbd-clt: Remove max_segment_size
block/rnbd-clt: Generate kobject_uevent when the rnbd device state changes
block/rnbd-srv: Remove unused arguments of rnbd_srv_rdma_ev
Documentation/ABI/rnbd-clt: Add description for nr_poll_queues
...
|
||
|
Linus Torvalds
|
6daa755f81 |
s390 updates for 5.13 merge window
- fix buffer size for in-kernel disassembler for ebpf programs. - fix two memory leaks in zcrypt driver. - expose PCI device UID as index, including an indicator if the uid is unique. - remove some oprofile leftovers. - improve stack unwinder tests. - don't use gcc atomic builtins anymore, just like all other architectures. Even though I'm sure the current code is ok, I totally dislike that s390 is the only architecture being special here; especially considering that there was a lengthly discussion about this topic and the outcome was not to use the builtins. Therefore open-code atomic ops again with inline assembly and switch to gcc builtins as soon as other architectures are doing. - couple of other changes to atomic and cmpxchg, and use atomic-instrumented.h for KASAN. - separate zbus creation, registration, and scanning in our PCI code which allows for cleaner and easier handling. - a rather large change to the vfio-ap code to fix circular locking dependencies when updating crypto masks. - move QAOB handling from qdio layer down to drivers. - add CRW inject facility to common I/O layer. This adds debugs files which allow to generate artificial events from user space for testing purposes. - increase SCLP console line length from 80 to 320 characters to avoid odd wrapped lines. - add protected virtualization guest and host indication files, which indicate either that a guest is running in pv mode or if the hypervisor is capable of starting pv guests. - various other small fixes and improvements all over the place. -----BEGIN PGP SIGNATURE----- iQIyBAABCAAdFiEECMNfWEw3SLnmiLkZIg7DeRspbsIFAmCICNwACgkQIg7DeRsp bsJgSQ/0Cn3KTymF8SJ7tXLpYBNHmZBL1sQ284pPNYmqluwephUaX643f/48RR5y rlbaewyHCbYyR+gwkUykuUQm/d+iwihip/uFmyEktr9JutOOS1RQKd8ujeyE2BUb aaDyE0J5VFYdd/ZA92n9FhkuNDOMZRFAK1SOfifT9jNWCl8iYz+pXV1Gx7LbJYVY KWfJ9D/zgzLoOTWhj4jWu8LutfLEqK+hq5nqxBII8APCV/QDYnjkwpwW01LoMtOv eHhtSz0JboFRk0FYf8oyR7AXQBz76+Ru3aivJNL7sr1S3N2yMSzNQbk/ATVBLER9 VMQX2TfGGT/Ln3P4rYEoP2vGITRn765wg4KWNB2u3pY2try12G39fmjzOwVfbxQw BDAcLwxU7Tw0vJY+yI6ZWkPDXcs+uAWQwNiYoMtfUPfMYLEpLFffbWGwdZPKZRrH fy4e5ZFuavZsZr8Zeu4WYILJZoDnvhbs59gPzaLBPKosR0ZGNi8q6bnztnqnrYhi Oirt6aPOOyEoN/IT2bO1sDhIzIpCorIwCMZTRIQzerFRcjJgy0xHM9MRYRLMj6iW xltgWNt01SbTm6pbimwMUnjN5AdMTbHlTSzD8G34eWO21cVgHGpndbcT/M3uemyy Wf034Er2eFqlhXyhiAYTnNhVGbd+YMido7eo/CbGvqCxNvmKbA== =e+mh -----END PGP SIGNATURE----- Merge tag 's390-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Heiko Carstens: - fix buffer size for in-kernel disassembler for ebpf programs. - fix two memory leaks in zcrypt driver. - expose PCI device UID as index, including an indicator if the uid is unique. - remove some oprofile leftovers. - improve stack unwinder tests. - don't use gcc atomic builtins anymore, just like all other architectures. Even though I'm sure the current code is ok, I totally dislike that s390 is the only architecture being special here; especially considering that there was a lengthly discussion about this topic and the outcome was not to use the builtins. Therefore open-code atomic ops again with inline assembly and switch to gcc builtins as soon as other architectures are doing. - couple of other changes to atomic and cmpxchg, and use atomic-instrumented.h for KASAN. - separate zbus creation, registration, and scanning in our PCI code which allows for cleaner and easier handling. - a rather large change to the vfio-ap code to fix circular locking dependencies when updating crypto masks. - move QAOB handling from qdio layer down to drivers. - add CRW inject facility to common I/O layer. This adds debugs files which allow to generate artificial events from user space for testing purposes. - increase SCLP console line length from 80 to 320 characters to avoid odd wrapped lines. - add protected virtualization guest and host indication files, which indicate either that a guest is running in pv mode or if the hypervisor is capable of starting pv guests. - various other small fixes and improvements all over the place. * tag 's390-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (53 commits) s390/disassembler: increase ebpf disasm buffer size s390/archrandom: add parameter check for s390_arch_random_generate s390/zcrypt: fix zcard and zqueue hot-unplug memleak s390/pci: expose a PCI device's UID as its index s390/atomic,cmpxchg: always inline __xchg/__cmpxchg s390/smp: fix do_restart() prototype s390: get rid of oprofile leftovers s390/atomic,cmpxchg: make constraints work with old compilers s390/test_unwind: print test suite start/end info s390/cmpxchg: use unsigned long values instead of void pointers s390/test_unwind: add WARN if tests failed s390/test_unwind: unify error handling paths s390: update defconfigs s390/spinlock: use R constraint in inline assembly s390/atomic,cmpxchg: switch to use atomic-instrumented.h s390/cmpxchg: get rid of gcc atomic builtins s390/atomic: get rid of gcc atomic builtins s390/atomic: use proper constraints s390/atomic: move remaining inline assemblies to atomic_ops.h s390/bitops: make bitops only work on longs ... |
||
|
Linus Torvalds
|
e359bce39d |
audit/stable-5.13 PR 20210426
-----BEGIN PGP SIGNATURE----- iQJIBAABCAAyFiEES0KozwfymdVUl37v6iDy2pc3iXMFAmCHM4YUHHBhdWxAcGF1 bC1tb29yZS5jb20ACgkQ6iDy2pc3iXOncA/+OnDdkYFD2e/6PsHURsQ9XK3Yk0kc 1PY7lJnT4Eb4cUeMe2DP9LpTkA0ldhCxxbz8HYJNn7TUADqeCGhkShBLs/Fxz6k0 F63RLupJFU0NKhBOYOyccqwmkzc19Ortcj27mYrIgYGK+tSPuRHzJ25PGmjnvh1W U7Or0sb1aOegxqFkTXi9IP2wY2Dv+YWfWkSdZNi/W5z4bedCQr9fJgGyUvsDCJyY YBIRa/VOLoU9AGkS/XN+uM06lckImC5gqZAqRtJEAk4vj7MsxcWp/eNkENiyaPeH +vSUrsv1bj0Bv85CMY8SWGY/GDaiDKjEf+3fVMHF5B/Ft3CgCheykbGPyjRqt3eT iIkv0PR5f2MclV5WB5n3gxwE42rPV+FOE8Mh8vRiDdkub/T8r0/cK0FJYPuwYWyA r/wdNKQpQUky+laMQWXKpi4tDx6JSWZPBPLG0I8Za/m1CV964VVok68VIMSmBcFj sbzYD6e3z9VTnuuxvLiS5HqFTtKkN5VG2al3HmBvZFtkF60xeNs4zbgHV4dg7adK clcBE3X4j0RHmYwLs4WWdOzWMPgx99BFJxVgZw3YGXv4oXguLUDFAswTIrc5FNtf YYs0/zsPn6CLt15Q7m/3Ec1T0fDf0A+DW3V3KSRNvLaMB41+E1XIWPYpUbfrr13v zGfT3CIdu9IR36Q= =SzqM -----END PGP SIGNATURE----- Merge tag 'audit-pr-20210426' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit Pull audit updates from Paul Moore: "Another small pull request for audit, most of the patches are documentation updates with only two real code changes: one to fix a compiler warning for a dummy function/macro, and one to cleanup some code since we removed the AUDIT_FILTER_ENTRY ages ago (v4.17)" * tag 'audit-pr-20210426' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit: audit: drop /proc/PID/loginuid documentation Format field audit: avoid -Wempty-body warning audit: document /proc/PID/sessionid audit: document /proc/PID/loginuid MAINTAINERS: update audit files audit: further cleanup of AUDIT_FILTER_ENTRY deprecation |
||
|
Linus Torvalds
|
5469f160e6 |
Power management updates for 5.13-rc1
- Add idle states table for IceLake-D to the intel_idle driver and
update IceLake-X C6 data in it (Artem Bityutskiy).
- Fix the C7 idle state on Tegra114 in the tegra cpuidle driver and
drop the unused do_idle() firmware call from it (Dmitry Osipenko).
- Fix cpuidle-qcom-spm Kconfig entry (He Ying).
- Fix handling of possible negative tick_nohz_get_next_hrtimer()
return values of in cpuidle governors (Rafael Wysocki).
- Add support for frequency-invariance to the ACPI CPPC cpufreq
driver and update the frequency-invariance engine (FIE) to use it
as needed (Viresh Kumar).
- Simplify the default delay_us setting in the ACPI CPPC cpufreq
driver (Tom Saeger).
- Clean up frequency-related computations in the intel_pstate
cpufreq driver (Rafael Wysocki).
- Fix TBG parent setting for load levels in the armada-37xx
cpufreq driver and drop the CPU PM clock .set_parent method for
armada-37xx (Marek Behún).
- Fix multiple issues in the armada-37xx cpufreq driver (Pali Rohár).
- Fix handling of dev_pm_opp_of_cpumask_add_table() return values
in cpufreq-dt to take the -EPROBE_DEFER one into acconut as
appropriate (Quanyang Wang).
- Fix format string in ia64-acpi-cpufreq (Sergei Trofimovich).
- Drop the unused for_each_policy() macro from cpufreq (Shaokun
Zhang).
- Simplify computations in the schedutil cpufreq governor to avoid
unnecessary overhead (Yue Hu).
- Fix typos in the s5pv210 cpufreq driver (Bhaskar Chowdhury).
- Fix cpufreq documentation links in Kconfig (Alexander Monakov).
- Fix PCI device power state handling in pci_enable_device_flags()
to avoid issuse in some cases when the device depends on an ACPI
power resource (Rafael Wysocki).
- Add missing documentation of pm_runtime_resume_and_get() (Alan
Stern).
- Add missing static inline stub for pm_runtime_has_no_callbacks()
to pm_runtime.h and drop the unused try_to_freeze_nowarn()
definition (YueHaibing).
- Drop duplicate struct device declaration from pm.h and fix a
structure type declaration in intel_rapl.h (Wan Jiabing).
- Use dev_set_name() instead of an open-coded equivalent of it in
the wakeup sources code and drop a redundant local variable
initialization from it (Andy Shevchenko, Colin Ian King).
- Use crc32 instead of md5 for e820 memory map integrity check
during resume from hibernation on x86 (Chris von Recklinghausen).
- Fix typos in comments in the system-wide and hibernation support
code (Lu Jialin).
- Modify the generic power domains (genpd) code to avoid resuming
devices in the "prepare" phase of system-wide suspend and
hibernation (Ulf Hansson).
- Add Hygon Fam18h RAPL support to the intel_rapl power capping
driver (Pu Wen).
- Add MAINTAINERS entry for the dynamic thermal power management
(DTPM) code (Daniel Lezcano).
- Add devm variants of operating performance points (OPP) API
functions and switch over some users of the OPP framework to
the new resource-managed API (Yangtao Li and Dmitry Osipenko).
- Update devfreq core:
* Register devfreq devices as cooling devices on demand (Daniel
Lezcano).
* Add missing unlock opeation in devfreq_add_device() (Lukasz
Luba).
* Use the next frequency as resume_freq instead of the previous
frequency when using the opp-suspend property (Dong Aisheng).
* Check get_dev_status in devfreq_update_stats() (Dong Aisheng).
* Fix set_freq path for the userspace governor in Kconfig (Dong
Aisheng).
* Remove invalid description of get_target_freq() (Dong Aisheng).
- Update devfreq drivers:
* imx8m-ddrc: Remove imx8m_ddrc_get_dev_status() and unneeded
of_match_ptr() (Dong Aisheng, Fabio Estevam).
* rk3399_dmc: dt-bindings: Add rockchip,pmu phandle and drop
references to undefined symbols (Enric Balletbo i Serra, Gaël
PORTAY).
* rk3399_dmc: Use dev_err_probe() to simplify the code (Krzysztof
Kozlowski).
* imx-bus: Remove unneeded of_match_ptr() (Fabio Estevam).
- Fix kernel-doc warnings in three places (Pierre-Louis Bossart).
- Fix typo in the pm-graph utility code (Ricardo Ribalda).
-----BEGIN PGP SIGNATURE-----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=t+SG
-----END PGP SIGNATURE-----
Merge tag 'pm-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add some new hardware support (for example, IceLake-D idle
states in intel_idle), fix some issues (for example, the handling of
negative "sleep length" values in cpuidle governors), add new
functionality to the existing drivers (for example, scale-invariance
support in the ACPI CPPC cpufreq driver) and clean up code all over.
Specifics:
- Add idle states table for IceLake-D to the intel_idle driver and
update IceLake-X C6 data in it (Artem Bityutskiy).
- Fix the C7 idle state on Tegra114 in the tegra cpuidle driver and
drop the unused do_idle() firmware call from it (Dmitry Osipenko).
- Fix cpuidle-qcom-spm Kconfig entry (He Ying).
- Fix handling of possible negative tick_nohz_get_next_hrtimer()
return values of in cpuidle governors (Rafael Wysocki).
- Add support for frequency-invariance to the ACPI CPPC cpufreq
driver and update the frequency-invariance engine (FIE) to use it
as needed (Viresh Kumar).
- Simplify the default delay_us setting in the ACPI CPPC cpufreq
driver (Tom Saeger).
- Clean up frequency-related computations in the intel_pstate cpufreq
driver (Rafael Wysocki).
- Fix TBG parent setting for load levels in the armada-37xx cpufreq
driver and drop the CPU PM clock .set_parent method for armada-37xx
(Marek Behún).
- Fix multiple issues in the armada-37xx cpufreq driver (Pali Rohár).
- Fix handling of dev_pm_opp_of_cpumask_add_table() return values in
cpufreq-dt to take the -EPROBE_DEFER one into acconut as
appropriate (Quanyang Wang).
- Fix format string in ia64-acpi-cpufreq (Sergei Trofimovich).
- Drop the unused for_each_policy() macro from cpufreq (Shaokun
Zhang).
- Simplify computations in the schedutil cpufreq governor to avoid
unnecessary overhead (Yue Hu).
- Fix typos in the s5pv210 cpufreq driver (Bhaskar Chowdhury).
- Fix cpufreq documentation links in Kconfig (Alexander Monakov).
- Fix PCI device power state handling in pci_enable_device_flags() to
avoid issuse in some cases when the device depends on an ACPI power
resource (Rafael Wysocki).
- Add missing documentation of pm_runtime_resume_and_get() (Alan
Stern).
- Add missing static inline stub for pm_runtime_has_no_callbacks() to
pm_runtime.h and drop the unused try_to_freeze_nowarn() definition
(YueHaibing).
- Drop duplicate struct device declaration from pm.h and fix a
structure type declaration in intel_rapl.h (Wan Jiabing).
- Use dev_set_name() instead of an open-coded equivalent of it in the
wakeup sources code and drop a redundant local variable
initialization from it (Andy Shevchenko, Colin Ian King).
- Use crc32 instead of md5 for e820 memory map integrity check during
resume from hibernation on x86 (Chris von Recklinghausen).
- Fix typos in comments in the system-wide and hibernation support
code (Lu Jialin).
- Modify the generic power domains (genpd) code to avoid resuming
devices in the "prepare" phase of system-wide suspend and
hibernation (Ulf Hansson).
- Add Hygon Fam18h RAPL support to the intel_rapl power capping
driver (Pu Wen).
- Add MAINTAINERS entry for the dynamic thermal power management
(DTPM) code (Daniel Lezcano).
- Add devm variants of operating performance points (OPP) API
functions and switch over some users of the OPP framework to the
new resource-managed API (Yangtao Li and Dmitry Osipenko).
- Update devfreq core:
* Register devfreq devices as cooling devices on demand (Daniel
Lezcano).
* Add missing unlock opeation in devfreq_add_device() (Lukasz
Luba).
* Use the next frequency as resume_freq instead of the previous
frequency when using the opp-suspend property (Dong Aisheng).
* Check get_dev_status in devfreq_update_stats() (Dong Aisheng).
* Fix set_freq path for the userspace governor in Kconfig (Dong
Aisheng).
* Remove invalid description of get_target_freq() (Dong Aisheng).
- Update devfreq drivers:
* imx8m-ddrc: Remove imx8m_ddrc_get_dev_status() and unneeded
of_match_ptr() (Dong Aisheng, Fabio Estevam).
* rk3399_dmc: dt-bindings: Add rockchip,pmu phandle and drop
references to undefined symbols (Enric Balletbo i Serra, Gaël
PORTAY).
* rk3399_dmc: Use dev_err_probe() to simplify the code (Krzysztof
Kozlowski).
* imx-bus: Remove unneeded of_match_ptr() (Fabio Estevam).
- Fix kernel-doc warnings in three places (Pierre-Louis Bossart).
- Fix typo in the pm-graph utility code (Ricardo Ribalda)"
* tag 'pm-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (74 commits)
PM: wakeup: remove redundant assignment to variable retval
PM: hibernate: x86: Use crc32 instead of md5 for hibernation e820 integrity check
cpufreq: Kconfig: fix documentation links
PM: wakeup: use dev_set_name() directly
PM: runtime: Add documentation for pm_runtime_resume_and_get()
cpufreq: intel_pstate: Simplify intel_pstate_update_perf_limits()
cpufreq: armada-37xx: Fix module unloading
cpufreq: armada-37xx: Remove cur_frequency variable
cpufreq: armada-37xx: Fix determining base CPU frequency
cpufreq: armada-37xx: Fix driver cleanup when registration failed
clk: mvebu: armada-37xx-periph: Fix workaround for switching from L1 to L0
clk: mvebu: armada-37xx-periph: Fix switching CPU freq from 250 Mhz to 1 GHz
cpufreq: armada-37xx: Fix the AVS value for load L1
clk: mvebu: armada-37xx-periph: remove .set_parent method for CPU PM clock
cpufreq: armada-37xx: Fix setting TBG parent for load levels
cpuidle: Fix ARM_QCOM_SPM_CPUIDLE configuration
cpuidle: tegra: Remove do_idle firmware call
cpuidle: tegra: Fix C7 idling state on Tegra114
PM: sleep: fix typos in comments
cpufreq: Remove unused for_each_policy macro
...
|
||
|
Linus Torvalds
|
ef12441243 |
USB/Thunderbolt patches for 5.13-rc1
Here is the big set of USB and Thunderbolt driver updates for 5.13-rc1.
Lots of little things in here, with loads of tiny fixes and cleanups
over these drivers, as well as these "larger" changes:
- thunderbolt updates and new features added
- xhci driver updates and split out of a mediatek-specific xhci
driver from the main xhci module to make it easier to work
with (something that I have been wanting for a while).
- loads of typec feature additions and updates
- dwc2 driver updates
- dwc3 driver updates
- gadget driver fixes and minor updates
- loads of usb-serial cleanups and fixes and updates
- usbip documentation updates and fixes
- lots of other tiny USB driver updates
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYIa42A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymMEACgkQBzLb5W/IocS+oq7+D7P3V581sAn1Dcy2Qq
Yz370/X2hrjXAyIm7/Cz
=5dj/
-----END PGP SIGNATURE-----
Merge tag 'usb-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB and Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver updates for
5.13-rc1.
Lots of little things in here, with loads of tiny fixes and cleanups
over these drivers, as well as these "larger" changes:
- thunderbolt updates and new features added
- xhci driver updates and split out of a mediatek-specific xhci
driver from the main xhci module to make it easier to work with
(something that I have been wanting for a while).
- loads of typec feature additions and updates
- dwc2 driver updates
- dwc3 driver updates
- gadget driver fixes and minor updates
- loads of usb-serial cleanups and fixes and updates
- usbip documentation updates and fixes
- lots of other tiny USB driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (371 commits)
usb: Fix up movement of USB core kerneldoc location
usb: dwc3: gadget: Handle DEV_TXF_FLUSH_BYPASS capability
usb: dwc3: Capture new capability register GHWPARAMS9
usb: gadget: prevent a ternary sign expansion bug
usb: dwc3: core: Do core softreset when switch mode
usb: dwc2: Get rid of useless error checks in suspend interrupt
usb: dwc2: Update dwc2_handle_usb_suspend_intr function.
usb: dwc2: Add exit hibernation mode before removing drive
usb: dwc2: Add hibernation exiting flow by system resume
usb: dwc2: Add hibernation entering flow by system suspend
usb: dwc2: Allow exit hibernation in urb enqueue
usb: dwc2: Move exit hibernation to dwc2_port_resume() function
usb: dwc2: Move enter hibernation to dwc2_port_suspend() function
usb: dwc2: Clear GINTSTS_RESTOREDONE bit after restore is generated.
usb: dwc2: Clear fifo_map when resetting core.
usb: dwc2: Allow exiting hibernation from gpwrdn rst detect
usb: dwc2: Fix hibernation between host and device modes.
usb: dwc2: Fix host mode hibernation exit with remote wakeup flow.
usb: dwc2: Reset DEVADDR after exiting gadget hibernation.
usb: dwc2: Update exit hibernation when port reset is asserted
...
|
||
|
Linus Torvalds
|
8900d92fd6 |
Staging/IIO driver updates for 5.13-rc1
Here is the big set of staging and IIO driver updates for 5.13-rc1.
Lots of little churn in here, and some larger churn as well. Major
things are:
- removal of wimax drivers, no one has this hardware anymore for
this failed "experiment".
- removal of the Google gasket driver, turns out no one wanted
to maintain it or cares about it anymore, so they asked for it
to be removed.
- comedi finally moves out of the staging directory into
drivers/comedi/ This is one of the oldest kernel subsystems
around, being created in the 2.0 kernel days, and was one of
the first things added to drivers/staging/ when that was
created over 15 years ago. It should have been moved out of
staging a long time ago, it's well maintained and used by
loads of different devices in the real world every day. Nice
to see this finally happen.
- so many tiny coding style cleanups it's not funny. Perfect
storm of at least 2 different intern project application
deadlines combined to provide a huge number of new
contributions in this area from people learning how to do
kernel development. Great job to everyone involved here.
There's also the normal updates for IIO drivers with new IIO drivers and
updates all over that subsystem.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYIa1zw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykfMACgq/Qj9n6NO/P4BX55XWjRkjOmxxwAoKrYEWkG
fIdLmhh4FGWkxaJO3Izf
=PCXb
-----END PGP SIGNATURE-----
Merge tag 'staging-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO driver updates from Greg KH:
"Here is the big set of staging and IIO driver updates for 5.13-rc1.
Lots of little churn in here, and some larger churn as well. Major
things are:
- removal of wimax drivers, no one has this hardware anymore for this
failed "experiment".
- removal of the Google gasket driver, turns out no one wanted to
maintain it or cares about it anymore, so they asked for it to be
removed.
- comedi finally moves out of the staging directory into drivers/comedi
This is one of the oldest kernel subsystems around, being created
in the 2.0 kernel days, and was one of the first things added to
drivers/staging/ when that was created over 15 years ago.
It should have been moved out of staging a long time ago, it's well
maintained and used by loads of different devices in the real world
every day. Nice to see this finally happen.
- so many tiny coding style cleanups it's not funny.
Perfect storm of at least 2 different intern project application
deadlines combined to provide a huge number of new contributions in
this area from people learning how to do kernel development. Great
job to everyone involved here.
There's also the normal updates for IIO drivers with new IIO drivers
and updates all over that subsystem.
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (907 commits)
staging: octeon: Use 'for_each_child_of_node'
Staging: rtl8723bs: rtw_xmit: fixed tabbing issue
staging: rtl8188eu: remove unused function parameters
staging: rtl8188eu: cmdThread is a task_struct
staging: rtl8188eu: remove constant variable and dead code
staging: rtl8188eu: change bLeisurePs' type to bool
staging: rtl8723bs: remove empty #ifdef block
staging: rtl8723bs: remove unused DBG_871X_LEVEL macro declarations
staging: rtl8723bs: split too long line
staging: rtl8723bs: fix indentation in if block
staging: rtl8723bs: fix code indent issue
staging: rtl8723bs: replace DBG_871X_LEVEL logs with netdev_*()
staging: rtl8192e: indent statement properly
staging: rtl8723bs: Remove led_blink_hdl() and everything related
staging: comedi: move out of staging directory
staging: rtl8723bs: remove sdio_drv_priv structure
staging: rtl8723bs: remove unused argument in function
staging: rtl8723bs: remove DBG_871X_SEL_NL macro declaration
staging: rtl8723bs: replace DBG_871X_SEL_NL with netdev_dbg()
staging: rtl8723bs: fix indentation issue introduced by long line split
...
|
||
|
Linus Torvalds
|
8e3a324950 |
Char/Misc driver updates for 5.13-rc1
Here is the big set of various smaller driver subsystem updates for
5.13-rc1.
Major bits in here are:
- habanalabs driver updates
- hwtracing driver updates
- interconnect driver updates
- mhi driver updates
- extcon driver updates
- fpga driver updates
- new binder features added
- nvmem driver updates
- phy driver updates
- soundwire driver updates
- smaller misc and char driver fixes and updates.
- bluetooth driver bugfix that maintainer wanted to go through
this tree.
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYIa0CQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylQ/QCgwLQleU5hH/iQwxbHgNL5GawNUroAmwZtxILF
1r6zjmGi0Ak4oFBf7A0T
=Rrl6
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big set of various smaller driver subsystem updates for
5.13-rc1.
Major bits in here are:
- habanalabs driver updates
- hwtracing driver updates
- interconnect driver updates
- mhi driver updates
- extcon driver updates
- fpga driver updates
- new binder features added
- nvmem driver updates
- phy driver updates
- soundwire driver updates
- smaller misc and char driver fixes and updates.
- bluetooth driver bugfix that maintainer wanted to go through this
tree.
All of these have been in linux-next with no reported issues"
* tag 'char-misc-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (330 commits)
bluetooth: eliminate the potential race condition when removing the HCI controller
coresight: etm-perf: Fix define build issue when built as module
phy: Revert "phy: ti: j721e-wiz: add missing of_node_put"
phy: ti: j721e-wiz: Add missing include linux/slab.h
phy: phy-twl4030-usb: Fix possible use-after-free in twl4030_usb_remove()
stm class: Use correct UUID APIs
intel_th: pci: Add Alder Lake-M support
intel_th: pci: Add Rocket Lake CPU support
intel_th: Consistency and off-by-one fix
intel_th: Constify attribute_group structs
intel_th: Constify all drvdata references
stm class: Remove an unused function
habanalabs/gaudi: Fix uninitialized return code rc when read size is zero
greybus: es2: fix kernel-doc warnings
mei: me: add Alder Lake P device id.
dw-xdata-pcie: Update outdated info and improve text format
dw-xdata-pcie: Fix documentation build warns
fbdev: zero-fill colormap in fbcmap.c
firmware: qcom-scm: Fix QCOM_SCM configuration
speakup: i18n: Switch to kmemdup_nul() in spk_msg_set()
...
|
||
|
Linus Torvalds
|
90035c28f1 |
platform-drivers-x86 for v5.13-1
Highlights: - Lots of Microsoft Surface work - platform-profile support for HP and Microsoft Surface devices - New WMI Gigabyte motherboard temperature monitoring driver - Intel PMC improvements for Tiger Lake and Alder Lake - Misc. bugfixes, improvements and quirk additions all over The following is an automated git shortlog grouped by driver: Add support for DYTC MMC_GET BIOS API.: - Add support for DYTC MMC_GET BIOS API. Adjust Dell drivers to a personal email address: - Adjust Dell drivers to a personal email address Fix typo in Kconfig: - Fix typo in Kconfig ISST: - Account for increased timeout in some cases MAINTAINERS: - Add missing section for alienware-wmi driver - Adjust Dell drivers to email alias - update MELLANOX HARDWARE PLATFORM SUPPORT maintainers Merge tag 'ib-mfd-platform-x86-v5.13' into review-hans: - Merge tag 'ib-mfd-platform-x86-v5.13' into review-hans Merge tag 'irq-no-autoen-2021-03-25' into review-hans: - Merge tag 'irq-no-autoen-2021-03-25' into review-hans Typo fix in the file classmate-laptop.c: - Typo fix in the file classmate-laptop.c add Gigabyte WMI temperature driver: - add Gigabyte WMI temperature driver add support for Advantech software defined button: - add support for Advantech software defined button asus-laptop: - fix kobj_to_dev.cocci warnings asus-wmi: - Add param to turn fn-lock mode on by default dell-wmi-sysman: - Make init_bios_attributes() ACPI object parsing more robust - Cleanup create_attributes_level_sysfs_files() - Make sysman_init() return -ENODEV of the interfaces are not found - Cleanup sysman_init() error-exit handling - Fix release_attributes_data() getting called twice on init_bios_attributes() failure - Make it safe to call exit_foo_attributes() multiple times - Fix possible NULL pointer deref on exit - Fix crash caused by calling kset_unregister twice docs: - driver-api: Add Surface DTX driver documentation genirq: - Add IRQF_NO_AUTOEN for request_irq/nmi() gigabyte-wmi: - add support for B550M AORUS PRO-P - add X570 AORUS ELITE hp-wmi: - add platform profile support - rename "thermal policy" to "thermal profile" intel-hid: - Fix spurious wakeups caused by tablet-mode events during suspend - Support Lenovo ThinkPad X1 Tablet Gen 2 intel-vbtn: - Remove unused KEYMAP_LEN define - Stop reporting SW_DOCK events intel_chtdc_ti_pwrbtn: - Fix missing IRQF_ONESHOT as only threaded handler intel_pmc_core: - Uninitialized data in pmc_core_lpm_latch_mode_write() - add ACPI dependency - Fix "unsigned 'ret' is never less than zero" smatch warning - Add support for Alder Lake PCH-P - Add LTR registers for Tiger Lake - Add option to set/clear LPM mode - Add requirements file to debugfs - Get LPM requirements for Tiger Lake - Show LPM residency in microseconds - Handle sub-states generically - Remove global struct pmc_dev - Don't use global pmcdev in quirks - export platform global reset bits via etr3 sysfs file - Ignore GBE LTR on Tiger Lake platforms - Update Kconfig intel_pmt_class: - Initial resource to 0 intel_pmt_crashlog: - Fix incorrect macros mfd: - intel_pmt: Add support for DG1 - intel_pmt: Fix nuisance messages and handling of disabled capabilities panasonic-laptop: - remove redundant assignment of variable result platform: - x86: ACPI: Get rid of ACPICA message printing platform/mellanox: - mlxreg-hotplug: move to use request_irq by IRQF_NO_AUTOEN flag - Typo fix in the file mlxbf-bootctl.c platform/surface: - aggregator: fix a bit test - aggregator: move to use request_irq by IRQF_NO_AUTOEN flag - aggregator_registry: Give devices time to set up when connecting - clean up a variable in surface_dtx_read() - fix semicolon.cocci warnings - aggregator_registry: Add support for Surface Pro 7+ - aggregator_registry: Make symbol 'ssam_base_hub_group' static - dtx: Add support for native SSAM devices - Add DTX driver - aggregator: Make SSAM_DEFINE_SYNC_REQUEST_x define static functions - Add platform profile driver - aggregator_registry: Add HID subsystem devices - aggregator_registry: Add DTX device - aggregator_registry: Add platform profile device - aggregator_registry: Add battery subsystem devices - aggregator_registry: Add base device hub - Set up Surface Aggregator device registry pmc_atom: - Match all Beckhoff Automation baytrail boards with critclk_systems DMI table thinkpad_acpi: - Add labels to the first 2 temperature sensors - Correct thermal sensor allocation - Correct minor typo - sysfs interface to get wwan antenna type - Disable DYTC CQL mode around switching to balanced mode - Allow the FnLock LED to change state - check dytc version for lapmode sysfs - Handle keyboard cover attach/detach events tools/power/x86/intel-speed-select: - v1.9 release - Drop __DATE__ and __TIME__ macros - Add options to force online - Process mailbox read error for core-power - Increase string size touchscreen_dmi: - Add info for the Teclast Tbook 11 tablet - Handle device properties with software node API wmi: - Make remove callback return void -----BEGIN PGP SIGNATURE----- iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmCGbVEUHGhkZWdvZWRl QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9x4ywgAo51ExPQcLMlEDdfpN7oa0ErT+4AF lKqOHO/g3Am63NwlAVZElKAJq+AChfQzZ+Idy9E/IirFplmhuoKBBRQoB+U9SwYS zerwNDwAh1j1ZLlWDo0BSsiJLdGJH3j5BvScjo57+Vfa75J9EofIGXvNEjLNxb7j djLc4FawAfaqL6YerKXZPvYIfpIw2+26SyxDw2s6KlYyBkPIEneQvto0ObWR3vLc 1iFxLgfxL1fYX7dD9e/9H84kIQzs/wgTduXmnSn32BcFw3YOtWpnpwB0wJ8IIXM0 8Ta6jH2ZGTbgfKaHZf2O+UObj8tRXFzjpx4neh5vybRrBsYELzQIm+W+jQ== =fsK6 -----END PGP SIGNATURE----- Merge tag 'platform-drivers-x86-v5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver updates freom Hans de Goede: - lots of Microsoft Surface work - platform-profile support for HP and Microsoft Surface devices - new WMI Gigabyte motherboard temperature monitoring driver - Intel PMC improvements for Tiger Lake and Alder Lake - misc bugfixes, improvements and quirk additions all over * tag 'platform-drivers-x86-v5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (87 commits) platform/x86: gigabyte-wmi: add support for B550M AORUS PRO-P platform/x86: intel_pmc_core: Uninitialized data in pmc_core_lpm_latch_mode_write() platform/x86: intel_pmc_core: add ACPI dependency platform/surface: aggregator: fix a bit test platform/x86: intel_pmc_core: Fix "unsigned 'ret' is never less than zero" smatch warning platform/x86: touchscreen_dmi: Add info for the Teclast Tbook 11 tablet platform/x86: intel_pmc_core: Add support for Alder Lake PCH-P platform/x86: intel_pmc_core: Add LTR registers for Tiger Lake platform/x86: intel_pmc_core: Add option to set/clear LPM mode platform/x86: intel_pmc_core: Add requirements file to debugfs platform/x86: intel_pmc_core: Get LPM requirements for Tiger Lake platform/x86: intel_pmc_core: Show LPM residency in microseconds platform/x86: intel_pmc_core: Handle sub-states generically platform/x86: intel_pmc_core: Remove global struct pmc_dev platform/x86: intel_pmc_core: Don't use global pmcdev in quirks platform/x86: intel_chtdc_ti_pwrbtn: Fix missing IRQF_ONESHOT as only threaded handler platform/x86: gigabyte-wmi: add X570 AORUS ELITE platform/x86: thinkpad_acpi: Add labels to the first 2 temperature sensors platform/x86: pmc_atom: Match all Beckhoff Automation baytrail boards with critclk_systems DMI table platform/x86: add Gigabyte WMI temperature driver ... |
||
|
Linus Torvalds
|
64a925c927 |
A bunch of SGI UV improvements, fixes and cleanups.
-----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmCGnFoACgkQEsHwGGHe VUqWUQ/+PgvdARGz+AYHV/FBzdkMqyqs2wEwB4vuZrjJMroon4IFn2CHbXqjmnET PMxoxQksrSaMS7Scc8mBTv6Zt9UN+m9/Kl1aBJ2EGDxhCQyDWgyi7pkV/badVp9H wHzAeRo7qlcC5bNBDnCRvzSYrshEwo3jV6L0B7h9J+xjBm1tYmDINKg/mspfeoAa toAlvVFK0AhOM8LeN5EJKpXKyAXWbz98y+v6Rj1AeapHn3CnSmYvvlcaEhzD5P4X +/BcmDZsKLLVj1iRvlqXOO+zgReJboRfQ/jxk6Nw/id6zlf2caqoy8xxmN/IM8uC vDhWf7uPuUAhpBZhBw4Y5TryDzJUjBXOgVnaZr6z0wgW1ZXN8N9ZRpIs1/R/mSrr yUcB0xv2b10tQaSwYLNNbmS4EQbvI/2Bq+aHqbGorGhODVqZ52XnllK5M1Iz3N8m 2ffwaaczlHqgnB6QOxb3yTGHPChGP7JRlAthWfI6M7DyuIa3g9I5msKOS1SuR51D qQowpvHsZ3ZytJFNJLA8Si4pgF6mZ7FsbFcPD7xXJHLwzGQ6SlD4csT4+9r9ONU/ Dzq3LufqUQL/egK8U6qdBpZGwf7nxd3bMAIfxETX1fcEla7JZ0OSSZKhbqDd2Jk8 o7TmcO1vi5wDc6tS2FbT74YzL3c1+/vwK1nZmrh/3UxBTbkauno= =nDvE -----END PGP SIGNATURE----- Merge tag 'x86_platform_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 platform updates from Borislav Petkov: "A bunch of SGI UV improvements, fixes and cleanups" * tag 'x86_platform_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/platform/uv: Remove dead !CONFIG_KEXEC_CORE code x86/platform/uv: Fix !KEXEC build failure x86/platform/uv: Add more to secondary CPU kdump info x86/platform/uv: Use x2apic enabled bit as set by BIOS to indicate APIC mode x86/platform/uv: Set section block size for hubless architectures x86/platform/uv: Fix indentation warning in Documentation/ABI/testing/sysfs-firmware-sgi_uv |
||
Tom Zanussi
|
81dd4d4d61 |
dmaengine: idxd: Add IDXD performance monitor support
Implement the IDXD performance monitor capability (named 'perfmon' in
the DSA (Data Streaming Accelerator) spec [1]), which supports the
collection of information about key events occurring during DSA and
IAX (Intel Analytics Accelerator) device execution, to assist in
performance tuning and debugging.
The idxd perfmon support is implemented as part of the IDXD driver and
interfaces with the Linux perf framework. It has several features in
common with the existing uncore pmu support:
- it does not support sampling
- does not support per-thread counting
However it also has some unique features not present in the core and
uncore support:
- all general-purpose counters are identical, thus no event constraints
- operation is always system-wide
While the core perf subsystem assumes that all counters are by default
per-cpu, the uncore pmus are socket-scoped and use a cpu mask to
restrict counting to one cpu from each socket. IDXD counters use a
similar strategy but expand the scope even further; since IDXD
counters are system-wide and can be read from any cpu, the IDXD perf
driver picks a single cpu to do the work (with cpu hotplug notifiers
to choose a different cpu if the chosen one is taken off-line).
More specifically, the perf userspace tool by default opens a counter
for each cpu for an event. However, if it finds a cpumask file
associated with the pmu under sysfs, as is the case with the uncore
pmus, it will open counters only on the cpus specified by the cpumask.
Since perfmon only needs to open a single counter per event for a
given IDXD device, the perfmon driver will create a sysfs cpumask file
for the device and insert the first cpu of the system into it. When a
user uses perf to open an event, perf will open a single counter on
the cpu specified by the cpu mask. This amounts to the default
system-wide rather than per-cpu counting mentioned previously for
perfmon pmu events. In order to keep the cpu mask up-to-date, the
driver implements cpu hotplug support for multiple devices, as IDXD
usually enumerates and registers more than one idxd device.
The perfmon driver implements basic perfmon hardware capability
discovery and configuration, and is initialized by the IDXD driver's
probe function. During initialization, the driver retrieves the total
number of supported performance counters, the pmu ID, and the device
type from idxd device, and registers itself under the Linux perf
framework.
The perf userspace tool can be used to monitor single or multiple
events depending on the given configuration, as well as event groups,
which are also supported by the perfmon driver. The user configures
events using the perf tool command-line interface by specifying the
event and corresponding event category, along with an optional set of
filters that can be used to restrict counting to specific work queues,
traffic classes, page and transfer sizes, and engines (See [1] for
specifics).
With the configuration specified by the user, the perf tool issues a
system call passing that information to the kernel, which uses it to
initialize the specified event(s). The event(s) are opened and
started, and following termination of the perf command, they're
stopped. At that point, the perfmon driver will read the latest count
for the event(s), calculate the difference between the latest counter
values and previously tracked counter values, and display the final
incremental count as the event count for the cycle. An overflow
handler registered on the IDXD irq path is used to account for counter
overflows, which are signaled by an overflow interrupt.
Below are a couple of examples of perf usage for monitoring DSA events.
The following monitors all events in the 'engine' category. Becuuse
no filters are specified, this captures all engine events for the
workload, which in this case is 19 iterations of the work generated by
the kernel dmatest module.
Details describing the events can be found in Appendix D of [1],
Performance Monitoring Events, but briefly they are:
event 0x1: total input data processed, in 32-byte units
event 0x2: total data written, in 32-byte units
event 0x4: number of work descriptors that read the source
event 0x8: number of work descriptors that write the destination
event 0x10: number of work descriptors dispatched from batch descriptors
event 0x20: number of work descriptors dispatched from work queues
# perf stat -e dsa0/event=0x1,event_category=0x1/,
dsa0/event=0x2,event_category=0x1/,
dsa0/event=0x4,event_category=0x1/,
dsa0/event=0x8,event_category=0x1/,
dsa0/event=0x10,event_category=0x1/,
dsa0/event=0x20,event_category=0x1/
modprobe dmatest channel=dma0chan0 timeout=2000
iterations=19 run=1 wait=1
Performance counter stats for 'system wide':
5,332 dsa0/event=0x1,event_category=0x1/
5,327 dsa0/event=0x2,event_category=0x1/
19 dsa0/event=0x4,event_category=0x1/
19 dsa0/event=0x8,event_category=0x1/
0 dsa0/event=0x10,event_category=0x1/
19 dsa0/event=0x20,event_category=0x1/
21.977436186 seconds time elapsed
The command below illustrates filter usage with a simple example. It
specifies that MEM_MOVE operations should be counted for the DSA
device dsa0 (event 0x8 corresponds to the EV_MEM_MOVE event - Number
of Memory Move Descriptors, which is part of event category 0x3 -
Operations. The detailed category and event IDs are available in
Appendix D, Performance Monitoring Events, of [1]). In addition to
the event and event category, a number of filters are also specified
(the detailed filter values are available in Chapter 6.4 (Filter
Support) of [1]), which will restrict counting to only those events
that meet all of the filter criteria. In this case, the filters
specify that only MEM_MOVE operations that are serviced by work queue
wq0 and specifically engine number engine0 and traffic class tc0
having sizes between 0 and 4k and page size of between 0 and 1G result
in a counter hit; anything else will be filtered out and not appear in
the final count. Note that filters are optional - any filter not
specified is assumed to be all ones and will pass anything.
# perf stat -e dsa0/filter_wq=0x1,filter_tc=0x1,filter_sz=0x7,
filter_eng=0x1,event=0x8,event_category=0x3/
modprobe dmatest channel=dma0chan0 timeout=2000
iterations=19 run=1 wait=1
Performance counter stats for 'system wide':
19 dsa0/filter_wq=0x1,filter_tc=0x1,filter_sz=0x7,
filter_eng=0x1,event=0x8,event_category=0x3/
21.865914091 seconds time elapsed
The output above reflects that the unspecified workload resulted in
the counting of 19 MEM_MOVE operation events that met the filter
criteria.
[1]: https://software.intel.com/content/www/us/en/develop/download/intel-data-streaming-accelerator-preliminary-architecture-specification.html
[ Based on work originally by Jing Lin. ]
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Link: https://lore.kernel.org/r/0c5080a7d541904c4ad42b848c76a1ce056ddac7.1619276133.git.zanussi@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
||
Paolo Bonzini
|
c4f71901d5 |
KVM/arm64 updates for Linux 5.13
New features: - Stage-2 isolation for the host kernel when running in protected mode - Guest SVE support when running in nVHE mode - Force W^X hypervisor mappings in nVHE mode - ITS save/restore for guests using direct injection with GICv4.1 - nVHE panics now produce readable backtraces - Guest support for PTP using the ptp_kvm driver - Performance improvements in the S2 fault handler - Alexandru is now a reviewer (not really a new feature...) Fixes: - Proper emulation of the GICR_TYPER register - Handle the complete set of relocation in the nVHE EL2 object - Get rid of the oprofile dependency in the PMU code (and of the oprofile body parts at the same time) - Debug and SPE fixes - Fix vcpu reset -----BEGIN PGP SIGNATURE----- iQJDBAABCgAtFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAmCCpuAPHG1hekBrZXJu ZWwub3JnAAoJECPQ0LrRPXpD2G8QALWQYeBggKnNmAJfuihzZ2WariBmgcENs2R2 qNZ/Py6dIF+b69P68nmgrEV1x2Kp35cPJbBwXnnrS4FCB5tk0b8YMaj00QbiRIYV UXbPxQTmYO1KbevpoEcw8NmR4bZJ/hRYPuzcQG7CCMKIZw0zj2cMcBofzQpTOAp/ CgItdcv7at3iwamQatfU9vUmC0nDdnjdIwSxTAJOYMVV1ENwtnYSNgZVo4XLTg7n xR/5Qx27PKBJw7GyTRAIIxKAzNXG2tDL+GVIHe4AnRp3z3La8sr6PJf7nz9MCmco ISgeY7EGQINzmm4LahpnV+2xwwxOWo8QotxRFGNuRTOBazfARyAbp97yJ6eXJUpa j0qlg3xK9neyIIn9BQKkKx4sY9V45yqkuVDsK6odmqPq3EE01IMTRh1N/XQi+sTF iGrlM3ZW4AjlT5zgtT9US/FRXeDKoYuqVCObJeXZdm3sJSwEqTAs0JScnc0YTsh7 m30CODnomfR2y5X6GoaubbQ0wcZ2I20K1qtIm+2F6yzD5P1/3Yi8HbXMxsSWyYWZ 1ldoSa+ZUQlzV9Ot0S3iJ4PkphLKmmO96VlxE2+B5gQG50PZkLzsr8bVyYOuJC8p T83xT9xd07cy+FcGgF9veZL99Y6BLHMa6ZwFUolYNbzJxqrmqyR1aiJMEBIcX+aP ACeKW1w5 =fpey -----END PGP SIGNATURE----- Merge tag 'kvmarm-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 updates for Linux 5.13 New features: - Stage-2 isolation for the host kernel when running in protected mode - Guest SVE support when running in nVHE mode - Force W^X hypervisor mappings in nVHE mode - ITS save/restore for guests using direct injection with GICv4.1 - nVHE panics now produce readable backtraces - Guest support for PTP using the ptp_kvm driver - Performance improvements in the S2 fault handler - Alexandru is now a reviewer (not really a new feature...) Fixes: - Proper emulation of the GICR_TYPER register - Handle the complete set of relocation in the nVHE EL2 object - Get rid of the oprofile dependency in the PMU code (and of the oprofile body parts at the same time) - Debug and SPE fixes - Fix vcpu reset |
||
Gioh Kim
|
015fcf13c4 |
Documentation/ABI/rnbd-clt: Add description for nr_poll_queues
describe how to set nr_poll_queues and enable the polling Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com> Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Link: https://lore.kernel.org/r/20210419073722.15351-15-gi-oh.kim@ionos.com Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
Gioh Kim
|
e5f221c701 |
Documentation/sysfs-block-rnbd: Add descriptions for remap_device and resize
Two sysfs entries, remap_device and resize, are missing. Signed-off-by: Gioh Kim <gi-oh.kim@cloud.ionos.com> Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com> Link: https://lore.kernel.org/r/20210419073722.15351-3-gi-oh.kim@ionos.com Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
Niklas Schnelle
|
81bbf03905 |
s390/pci: expose a PCI device's UID as its index
On s390 each PCI device has a user-defined ID (UID) exposed under /sys/bus/pci/devices/<dev>/uid. This ID was designed to serve as the PCI device's primary index and to match the device within Linux to the device configured in the hypervisor. To serve as a primary identifier the UID must be unique within the Linux instance, this is guaranteed by the platform if and only if the UID Uniqueness Checking flag is set within the CLP List PCI Functions response. In this sense the UID serves an analogous function as the SMBIOS instance number or ACPI index exposed as the "index" respectively "acpi_index" device attributes and used by e.g. systemd to set interface names. As s390 does not use and will likely never use ACPI nor SMBIOS there is no conflict and we can just expose the UID under the "index" attribute whenever UID Uniqueness Checking is active and get systemd's interface naming support for free. Link: https://lore.kernel.org/lkml/20210412135905.1434249-1-schnelle@linux.ibm.com/ Acked-by: Viktor Mihajlovski <mihajlov@linux.ibm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Narendra K <narendra_k@dell.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> |
||
Jakub Kicinski
|
8203c7ce4e |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c - keep the ZC code, drop the code related to reinit net/bridge/netfilter/ebtables.c - fix build after move to net_generic Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Gioh Kim
|
abdeef3b23 |
Documentation/ABI/rtrs-clt: Add descriptions for min-latency policy
Describe new multipath policy min-latency of the RTRS client. Link: https://lore.kernel.org/r/20210407113444.150961-5-gi-oh.kim@ionos.com Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com> Signed-off-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> |
||
Greg Kroah-Hartman
|
5367f82a21 |
thunderbolt: Changes for v5.13 merge window
This includes following Thunderbolt/USB4 changes for v5.13 merge window:
* Debugfs improvements
* Align the inter-domain (peer-to-peer) support with the USB4
inter-domain spec for better interoperability
* Add support for USB4 DROM and the new product descriptor
* More KUnit tests
* Detailed uevent for routers
* Few miscellaneous improvements
All these have been in linux-next without reported issues.
-----BEGIN PGP SIGNATURE-----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=RzJl
-----END PGP SIGNATURE-----
Merge tag 'thunderbolt-for-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next
Mika writes:
thunderbolt: Changes for v5.13 merge window
This includes following Thunderbolt/USB4 changes for v5.13 merge window:
* Debugfs improvements
* Align the inter-domain (peer-to-peer) support with the USB4
inter-domain spec for better interoperability
* Add support for USB4 DROM and the new product descriptor
* More KUnit tests
* Detailed uevent for routers
* Few miscellaneous improvements
All these have been in linux-next without reported issues.
* tag 'thunderbolt-for-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: (24 commits)
thunderbolt: Hide authorized attribute if router does not support PCIe tunnels
thunderbolt: Add details to router uevent
thunderbolt: Unlock on error path in tb_domain_add()
thunderbolt: Add support for USB4 DROM
thunderbolt: Check quirks in tb_switch_add()
thunderbolt: Add KUnit tests for DMA tunnels
thunderbolt: Add KUnit tests for XDomain properties
net: thunderbolt: Align the driver to the USB4 networking spec
thunderbolt: Allow multiple DMA tunnels over a single XDomain connection
thunderbolt: Drop unused tb_port_set_initial_credits()
thunderbolt: Use dedicated flow control for DMA tunnels
thunderbolt: Add support for maxhopid XDomain property
thunderbolt: Add tb_property_copy_dir()
thunderbolt: Align XDomain protocol timeouts with the spec
thunderbolt: Use pseudo-random number as initial property block generation
thunderbolt: Do not re-establish XDomain DMA paths automatically
thunderbolt: Add more logging to XDomain connections
Documentation / thunderbolt: Drop speed/lanes entries for XDomain
thunderbolt: Decrease control channel timeout for software connection manager
thunderbolt: Do not pass timeout for tb_cfg_reset()
...
|
||
Tamar Mashiah
|
ee7abc105e |
platform/x86: intel_pmc_core: export platform global reset bits via etr3 sysfs file
During PCH (platform/board) manufacturing process a global platform reset has to be induced in order for the configuration changes take the effect upon following platform reset. This is an internal platform state and is not intended to be used in the regular platform resets. The setting is exposed via ETR3 (Extended Test Mode Register 3). After the manufacturing process is completed the register cannot be written anymore and is hardware locked. This setting was commonly done by accessing PMC registers via /dev/mem but due to security concerns /dev/mem access is much more restricted, hence the reason for exposing this setting via the dedicated sysfs interface. To prevent post manufacturing abuse the register is protected by hardware locking and the file is set to read-only mode via is_visible handler. The register in MMIO space is defined for Cannon Lake and newer PCHs. Cc: Hans de Goede <hdegoede@redhat.com> Cc: David E Box <david.e.box@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Tamar Mashiah <tamar.mashiah@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20210411141532.3004893-1-tomas.winkler@intel.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> |
||
|
Greg Kroah-Hartman
|
5bdb080f96 |
Revert "usb: Link the ports to the connectors they are attached to"
This reverts commit
|
||
|
Greg Kroah-Hartman
|
14d34d2dbb |
Merge 5.12-rc7 into usb-next
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Jakub Kicinski
|
95b5c29132 |
Merge branch 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Saeed Mahameed says: ==================== mlx5-next 2021-04-09 This pr contains changes from mlx5-next branch, already reviewed on netdev and rdma mailing lists, links below. 1) From Leon, Dynamically assign MSI-X vectors count Already Acked by Bjorn Helgaas. https://patchwork.kernel.org/project/netdevbpf/cover/20210314124256.70253-1-leon@kernel.org/ 2) Cleanup series: https://patchwork.kernel.org/project/netdevbpf/cover/20210311070915.321814-1-saeed@kernel.org/ From Mark, E-Switch cleanups and refactoring, and the addition of single FDB mode needed HW bits. From Mikhael, Remove unused struct field From Saeed, Cleanup W=1 prototype warning From Zheng, Esw related cleanup From Tariq, User order-0 page allocation for EQs * 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux: net/mlx5: Implement sriov_get_vf_total_msix/count() callbacks net/mlx5: Dynamically assign MSI-X vectors count net/mlx5: Add dynamic MSI-X capabilities bits PCI/IOV: Add sysfs MSI-X vector assignment interface net/mlx5: Use order-0 allocations for EQs net/mlx5: Add IFC bits needed for single FDB mode net/mlx5: E-Switch, Refactor send to vport to be more generic RDMA/mlx5: Use representor E-Switch when getting netdev and metadata net/mlx5: E-Switch, Add eswitch pointer to each representor net/mlx5: E-Switch, Add match on vhca id to default send rules net/mlx5: Remove unused mlx5_core_health member recover_work net/mlx5: simplify the return expression of mlx5_esw_offloads_pair() net/mlx5: Cleanup prototype warning ==================== Link: https://lore.kernel.org/r/20210409200704.10886-1-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
Marek Behún
|
b37c384843 |
treewide: change my e-mail address, fix my name
Change my e-mail address to kabel@kernel.org, and fix my name in non-code parts (add diacritical mark). Link: https://lkml.kernel.org/r/20210325171123.28093-2-kabel@kernel.org Signed-off-by: Marek Behún <kabel@kernel.org> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jassi Brar <jassisinghbrar@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Heikki Krogerus
|
63cd786173 |
usb: Link the ports to the connectors they are attached to
Creating link to the USB Type-C connector for every new port that is added when possible. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20210407065555.88110-3-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Oded Gabbay
|
639781dcab |
habanalabs/gaudi: add debugfs to DMA from the device
When trying to debug program, the user often needs to dump large parts of the device's DRAM, which can reach to tens of GBs. Because reading from the device's internal memory through the PCI BAR is extremely slow, the debug can take hours. Instead, we can provide the user to copy data through one of the DMA engines. This will make the operation much faster. Currently, only GAUDI is supported. In GAUDI, we need to find a PCI DMA engine that is IDLE and set the DMA as secured to be able to bypass our MMU as we currently don't map the temporary buffer to the MMU. Example bash one-line to dump entire HBM to file (~2 minutes): for (( i=0x0; i < 0x800000000; i+=0x8000000 )); do \ printf '0x%x\n' $i | sudo tee /sys/kernel/debug/habanalabs/hl0/addr ; \ echo 0x8000000 | sudo tee /sys/kernel/debug/habanalabs/hl0/dma_size ; \ sudo cat /sys/kernel/debug/habanalabs/hl0/data_dma >> hbm.txt ; done Signed-off-by: Oded Gabbay <ogabbay@kernel.org> |
||
Sagiv Ozeri
|
a4371c1a1e |
habanalabs: support HW blocks vm show
Improve "vm" debugfs node to print also the virtual addresses which are currently mapped to HW blocks in the device. Signed-off-by: Sagiv Ozeri <sozeri@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org> |
||
Maximilian Luz
|
167f77f7d0 |
power: supply: Add battery driver for Surface Aggregator Module
On newer Microsoft Surface models (specifically 7th-generation, i.e. Surface Pro 7, Surface Book 3, Surface Laptop 3, and Surface Laptop Go), battery and AC status/information is no longer handled via standard ACPI devices, but instead directly via the Surface System Aggregator Module (SSAM), i.e. the embedded controller on those devices. While on previous generation models, battery status is also handled via SSAM, an ACPI shim was present to translate the standard ACPI battery interface to SSAM requests. The SSAM interface itself, which is modeled closely after the ACPI interface, has not changed. This commit introduces a new SSAM client device driver to support battery status/information via the aforementioned interface on said Surface models. It is in parts based on the standard ACPI battery driver. Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> |
||
Dong Aisheng
|
05f15314f0 |
PM / devfreq: Remove the invalid description for get_target_freq
First of all, no_central_polling was removed since
commit
|
||
Jonathan Cameron
|
9b2571b02d |
iio:Documentation:ABI Add missing elements as used by the adi,ad7150
Main additions are around thresh_adaptive. This has been supported by the core of IIO for a long time, but no driver that uses it has previously graduated from staging, hence we are missing Docs. Otherwise, just new entries in existing lists. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com> Link: https://lore.kernel.org/r/20210314181511.531414-22-jic23@kernel.org |
||
Anshuman Khandual
|
b20f34aec7 |
Documentation: coresight: trbe: Sysfs ABI description
Add sysfs ABI documentation for the TRBE devices. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-doc@vger.kernel.org Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> [ Split from the TRBE driver patch ] Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20210405164307.1720226-19-suzuki.poulose@arm.com Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> |
||
Gustavo Pimentel
|
177260a705 |
docs: ABI: Add sysfs documentation interface of dw-xdata-pcie driver
This patch describes the sysfs interface implemented on the dw-xdata-pcie driver. Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Link: https://lore.kernel.org/r/438c4ca9f6cc9e1cb29a65c0d2cca9a3d3f181b1.1617016509.git.gustavo.pimentel@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Greg Kroah-Hartman
|
422d224513 |
Merge 5.12-rc6 into char-misc-next
We need the char/misc fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |