- Fix a kernel crash when a signal is delivered to bad userspace stack
- Fix fall-through warnings in math-emu code
- Increase size of gcc stack frame check
- Switch coding from 'pci_' to 'dma_' API
- Make struct parisc_driver::remove() return void
- Some parisc related Makefile changes
- Minor cleanups, e.g. change to octal permissions, fix macro collisions,
fix PMD_ORDER collision, replace spaces with tabs
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCYTELwQAKCRD3ErUQojoP
Xy/uAQChkDVD15kBvj0PUt4hDpGq7ryfAsEfMnxlV2k4Ue6SKAEA3Smfd242lpPF
f89NNo6Y/ZhO+aWKfOLerXLfM6sB2QQ=
=cxvN
-----END PGP SIGNATURE-----
Merge tag 'for-5.15/parisc' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture updates from Helge Deller:
- Fix a kernel crash when a signal is delivered to bad userspace stack
- Fix fall-through warnings in math-emu code
- Increase size of gcc stack frame check
- Switch coding from 'pci_' to 'dma_' API
- Make struct parisc_driver::remove() return void
- Some parisc related Makefile changes
- Minor cleanups, e.g. change to octal permissions, fix macro
collisions, fix PMD_ORDER collision, replace spaces with tabs
* tag 'for-5.15/parisc' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: math-emu: Fix fall-through warnings
parisc: fix crash with signals and alloca
parisc: Fix compile failure when building 64-bit kernel natively
parisc: ccio-dma.c: Added tab instead of spaces
parisc/parport_gsc: switch from 'pci_' to 'dma_' API
parisc: move core-y in arch/parisc/Makefile to arch/parisc/Kbuild
parisc: switch from 'pci_' to 'dma_' API
parisc: Make struct parisc_driver::remove() return void
parisc: remove unused arch/parisc/boot/install.sh and its phony target
parisc: Rename PMD_ORDER to PMD_TABLE_ORDER
parisc: math-emu: Avoid "fmt" macro collision
parisc: Increase size of gcc stack frame check
parisc: Replace symbolic permissions with octal permissions
There are a few intensive changes in ALSA core side at this time that
helped the significant code reduction. Meanwhile we keep getting new
stuff, so the total size still grows...
Anyway, the below are some highlights in this development cycle.
ALSA core:
- New helpers to manage page allocations and card object with devres
- Refactoring for memory allocation with wc-pages
- A new PCM hardware flag SNDRV_PCM_INFO_EXPLICIT_SYNC for controlling
the explicit sync of the stream control; it'll be used for ASoC SOF
and non-coherent memory in future
ASoC:
- Lots of cleanups and improvements to the Intel drivers, including
some new systems support
- New support for AMD Vangoh, CUI CMM-4030D-261, Mediatek Mt8195,
Renesas RZ/G2L Mediatek Mt8195, RealTek RT101P, Renesas RZ/G2L,
Rockchip RK3568 S/PDIF
USB-audio:
- Re-organized the quirk handling and a new option quirk_flags
- Fix for a regression in 5.14 code change for JACK
- Quirks for Sony WALKMAN, Digidesign mbox
HD-audio:
- Enhanced support for CS8409 codec
- More consistent shutdown behavior with the runtime PM
- The model option can accept the PCI or codec SSID as an alias
- Quirks for ASUS ROG, HP Spectre x360
Others:
- Lots of code reduction in legacy drivers with devres helpers
- FireWire MOTU 896HD support
-----BEGIN PGP SIGNATURE-----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=fHyJ
-----END PGP SIGNATURE-----
Merge tag 'sound-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"There are a few intensive changes in ALSA core side at this time that
helped with significant code reduction. Meanwhile we keep getting new
stuff, so the total size still grows...
Anyway, the below are some highlights in this development cycle.
ALSA core:
- New helpers to manage page allocations and card object with devres
- Refactoring for memory allocation with wc-pages
- A new PCM hardware flag SNDRV_PCM_INFO_EXPLICIT_SYNC for
controlling the explicit sync of the stream control; it'll be used
for ASoC SOF and non-coherent memory in future
ASoC:
- Lots of cleanups and improvements to the Intel drivers, including
some new systems support
- New support for AMD Vangoh, CUI CMM-4030D-261, Mediatek Mt8195,
Renesas RZ/G2L Mediatek Mt8195, RealTek RT101P, Renesas RZ/G2L,
Rockchip RK3568 S/PDIF
USB-audio:
- Re-organized the quirk handling and a new option quirk_flags
- Fix for a regression in 5.14 code change for JACK
- Quirks for Sony WALKMAN, Digidesign mbox
HD-audio:
- Enhanced support for CS8409 codec
- More consistent shutdown behavior with the runtime PM
- The model option can accept the PCI or codec SSID as an alias
- Quirks for ASUS ROG, HP Spectre x360
Others:
- Lots of code reduction in legacy drivers with devres helpers
- FireWire MOTU 896HD support"
* tag 'sound-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (421 commits)
ASoC: Revert PCM trigger changes
ALSA: usb-audio: Add lowlatency module option
ALSA: hda/cs8409: Initialize Codec only in init fixup.
ALSA: hda/cs8409: Ensure Type Detection is only run on startup when necessary
ALSA: usb-audio: Work around for XRUN with low latency playback
ALSA: pcm: fix divide error in snd_pcm_lib_ioctl
ASoC: soc-pcm: test refcount before triggering
ASoC: soc-pcm: protect BE dailink state changes in trigger
ASoC: wcd9335: Disable irq on slave ports in the remove function
ASoC: wcd9335: Fix a memory leak in the error handling path of the probe function
ASoC: wcd9335: Fix a double irq free in the remove function
ALSA: hda: Disable runtime resume at shutdown
ASoC: rockchip: i2s: Add support for frame inversion
ASoC: dt-bindings: rockchip: Add compatible strings for more SoCs
ASoC: rockchip: i2s: Add compatible for more SoCs
ASoC: rockchip: i2s: Make playback/capture optional
ASoC: rockchip: i2s: Fixup config for DAIFMT_DSP_A/B
ASoC: dt-bindings: rockchip: Document reset property for i2s
ASoC: rockchip: i2s: Fix regmap_ops hang
ASoC: rockchip: i2s: Improve dma data transfer efficiency
...
Here is the big set of driver core patches for 5.15-rc1.
These do change a number of different things across different
subsystems, and because of that, there were 2 stable tags created that
might have already come into your tree from different pulls that did the
following
- changed the bus remove callback to return void
- sysfs iomem_get_mapping rework
The latter one will cause a tiny merge issue with your tree, as there
was a last-minute fix for this in 5.14 in your tree, but the fixup
should be "obvious". If you want me to provide a fixed merge for this,
please let me know.
Other than those two things, there's only a few small things in here:
- kernfs performance improvements for huge numbers of sysfs
users at once
- tiny api cleanups
- other minor changes
All of these have been in linux-next for a while with no reported
problems, other than the before-mentioned merge issue.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYS+FLQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylXuACfWECnysDtXNe66DdETCFs1a1RToYAoMokWeU5
s8VFP1NY2BjmxJbkebLL
=8kVu
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big set of driver core patches for 5.15-rc1.
These do change a number of different things across different
subsystems, and because of that, there were 2 stable tags created that
might have already come into your tree from different pulls that did
the following
- changed the bus remove callback to return void
- sysfs iomem_get_mapping rework
Other than those two things, there's only a few small things in here:
- kernfs performance improvements for huge numbers of sysfs users at
once
- tiny api cleanups
- other minor changes
All of these have been in linux-next for a while with no reported
problems, other than the before-mentioned merge issue"
* tag 'driver-core-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (33 commits)
MAINTAINERS: Add dri-devel for component.[hc]
driver core: platform: Remove platform_device_add_properties()
ARM: tegra: paz00: Handle device properties with software node API
bitmap: extend comment to bitmap_print_bitmask/list_to_buf
drivers/base/node.c: use bin_attribute to break the size limitation of cpumap ABI
topology: use bin_attribute to break the size limitation of cpumap ABI
lib: test_bitmap: add bitmap_print_bitmask/list_to_buf test cases
cpumask: introduce cpumap_print_list/bitmask_to_buf to support large bitmask and list
sysfs: Rename struct bin_attribute member to f_mapping
sysfs: Invoke iomem_get_mapping() from the sysfs open callback
debugfs: Return error during {full/open}_proxy_open() on rmmod
zorro: Drop useless (and hardly used) .driver member in struct zorro_dev
zorro: Simplify remove callback
sh: superhyway: Simplify check in remove callback
nubus: Simplify check in remove callback
nubus: Make struct nubus_driver::remove return void
kernfs: dont call d_splice_alias() under kernfs node lock
kernfs: use i_lock to protect concurrent inode updates
kernfs: switch kernfs to use an rwsem
kernfs: use VFS negative dentry caching
...
Quite a quiet release this time, mostly a combination of cleanups
and a good set of new drivers.
- Lots of cleanups and improvements to the Intel drivers,
including some new systems support.
- New support for AMD Vangoh, CUI CMM-4030D-261, Mediatek
Mt8195, Renesas RZ/G2L Mediatek Mt8195, RealTek RT101P,
Renesas RZ/G2L,, Rockchip RK3568 S/PDIF.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmEsxhYTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0Py1B/0dVvB5iLx7t7Vp3EbxIbAQ/4URpmfV
A/yIWY6fii6vhVsdsqU+8FN7D5m5ZpVUx+3kH//oCsPL7VLem3sjh64lge1lQz4A
9G9FU63nSCY8X0dL4cfZTNEd+FYrCHZDqU8y7oJg+v3U7D42MVLhTwySaCuP6W56
KZhxOUIuyfIrhmkfBEAUCA6jyPSbVAy7Aw9B5WhJhX07yw0vToxnycbTnjwMzMYn
3Bvfycyg9pqpxAdCuJVPVs3S8+CM5/+QjKb0J6vy1Zuw49jNSUdkvuyRWXZsAoAF
zepXWEKXvclKNZDR0N1AO4H+9fUeSvkc/IX7XEHZ0Zk8w2eMico0ceAz
=BHW1
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.15' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v5.15
Quite a quiet release this time, mostly a combination of cleanups
and a good set of new drivers.
- Lots of cleanups and improvements to the Intel drivers,
including some new systems support.
- New support for AMD Vangoh, CUI CMM-4030D-261, Mediatek
Mt8195, Renesas RZ/G2L Mediatek Mt8195, RealTek RT101P,
Renesas RZ/G2L,, Rockchip RK3568 S/PDIF.
The caller of this function (parisc_driver_remove() in
arch/parisc/kernel/drivers.c) ignores the return value, so better don't
return any value at all to not wake wrong expectations in driver authors.
The only function that could return a non-zero value before was
ipmi_parisc_remove() which returns the return value of
ipmi_si_remove_by_dev(). Make this function return void, too, as for all
other callers the value is ignored, too.
Also fold in a small checkpatch fix for:
WARNING: Unnecessary space before function pointer arguments
+ void (*remove) (struct parisc_device *dev);
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> (for drivers/input)
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Acked-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Helge Deller <deller@gmx.de>
For making user to switch back to the old playback mode, this patch
adds a new module option 'lowlatency' to snd-usb-audio driver.
When user face a regression due to the recent low-latency playback
support, they can test easily by passing lowlatency=0 option without
rebuilding the kernel.
Fixes: 307cc9baac ("ALSA: usb-audio: Reduce latency at playback start, take#2")
Link: https://lore.kernel.org/r/20210829073830.22686-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It is not necessary to initialize the codec during both probe and inside
the init fixup.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210827110252.5361-2-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Type Detection should only be run after init and when the controls have been
built. There is no need to run it multiple times.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210827110252.5361-1-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent change for low latency playback works in most of test cases
but it turned out still to hit errors on some use cases, most notably
with JACK with small buffer sizes. This is because USB-audio driver
fills up and submits full URBs at the beginning, while the URBs would
return immediately and try to fill more -- that can easily trigger
XRUN. It was more or less expected, but in the small buffer size, the
problem became pretty obvious.
Fixing this behavior properly would require the change of the
fundamental driver design, so it's no trivial task, unfortunately.
Instead, here we work around the problem just by switching back to the
old method when the given configuration is too fragile with the low
latency stream handling. As a threshold, we calculate the total
buffer bytes in all plus one URBs, and check whether it's beyond the
PCM buffer bytes. The one extra URB is needed because XRUN happens at
the next submission after the first round.
Fixes: 307cc9baac ("ALSA: usb-audio: Reduce latency at playback start, take#2")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210827203311.5987-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The first 2 patches are sraightforward and look logical to me.
However, the 3rd one in purely speculative. It is based on the fact that a
comment states that we enable some irqs on some slave ports. That said, it writes
0xFF in some registers.
So, I guess that we should disable these irqs when the driver is removed. That
said, writing 0x00 at the same place looks logical to me.
This cis untested and NOT based on any documentation. Just a blind fix.
Review with care.
You'll be warned :)
Christophe JAILLET (3):
ASoC: wcd9335: Fix a double irq free in the remove function
ASoC: wcd9335: Fix a memory leak in the error handling path of the
probe function
ASoC: wcd9335: Disable irq on slave ports in the remove function
sound/soc/codecs/wcd9335.c | 23 +++++++++++++++++++++--
1 file changed, 21 insertions(+), 2 deletions(-)
--
2.30.2
On start/pause_release/resume, when more than one FE is connected to
the same BE, it's possible that the trigger is sent more than
once. This is not desirable, we only want to trigger a BE once, which
is straightforward to implement with a refcount.
For stop/pause/suspend, the problem is more complicated: the check
implemented in snd_soc_dpcm_can_be_free_stop() may fail due to a
conceptual deadlock when we trigger the BE before the FE. In this
case, the FE states have not yet changed, so there are corner cases
where the TRIGGER_STOP is never sent - the dual case of start where
multiple triggers might be sent.
This patch suggests an unconditional trigger in all cases, without
checking the FE states, using a refcount protected by a spinlock.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Message-Id: <20210817164054.250028-3-pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
When more than one FE is connected to a BE, e.g. in a mixing use case,
the BE can be triggered multiple times when the FE are opened/started
concurrently. This race condition is problematic in the case of
SoundWire BE dailinks, and this is not desirable in a general
case. The code carefully checks when the BE can be stopped or
hw_free'ed, but the trigger code does not use any mutual exclusion.
Fix by using the same spinlock already used to check FE states, and
set the state before the trigger. In case of errors, the initial
state will be restored.
This patch does not change how the triggers are handled, it only makes
sure the states are handled in critical sections.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Message-Id: <20210817164054.250028-2-pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The probe calls 'wcd9335_setup_irqs()' to enable interrupts on all slave
ports.
This must be undone in the remove function.
Add a 'wcd9335_teardown_irqs()' function that undoes 'wcd9335_setup_irqs()'
function, and call it from the remove function.
Fixes: 20aedafdf4 ("ASoC: wcd9335: add support to wcd9335 codec")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Message-Id: <8f761244d79bd4c098af8a482be9121d3a486d1b.1629091028.git.christophe.jaillet@wanadoo.fr>
Signed-off-by: Mark Brown <broonie@kernel.org>
If 'wcd9335_setup_irqs()' fails, me must release the memory allocated in
'wcd_clsh_ctrl_alloc()', as already done in the remove function.
Add an error handling path and the missing 'wcd_clsh_ctrl_free()' call.
Fixes: 20aedafdf4 ("ASoC: wcd9335: add support to wcd9335 codec")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Message-Id: <6dc12372f09fabb70bf05941dbe6a1382dc93e43.1629091028.git.christophe.jaillet@wanadoo.fr>
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no point in calling 'free_irq()' explicitly for
'WCD9335_IRQ_SLIMBUS' in the remove function.
The irqs are requested in 'wcd9335_setup_irqs()' using a resource managed
function (i.e. 'devm_request_threaded_irq()').
'wcd9335_setup_irqs()' requests all what is defined in the 'wcd9335_irqs'
structure.
This structure has only one entry for 'WCD9335_IRQ_SLIMBUS'.
So 'devm_request...irq()' + explicit 'free_irq()' would lead to a double
free.
Remove the unneeded 'free_irq()' from the remove function.
Fixes: 20aedafdf4 ("ASoC: wcd9335: add support to wcd9335 codec")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Message-Id: <0614d63bc00edd7e81dd367504128f3d84f72efa.1629091028.git.christophe.jaillet@wanadoo.fr>
Signed-off-by: Mark Brown <broonie@kernel.org>
Although we modified the codec shutdown callback to perform
runtime-suspend, it's still not fully effective, as this may be
resumed again at any time later.
For fixing such an unwanted resume, this patch replaces
pm_runtime_suspend() with pm_runtime_force_suspend(), and call
pm_runtime_disable() afterward. It assures to keep the device
suspended.
Also for code simplification, we apply the code unconditionally; when
it's been already suspended, nothing would happen by calls of
snd_pcm_suspend_all() and pm_runtime_force_suspend(), just proceed to
pm_runtime_disable().
Fixes: b98444ed59 ("ALSA: hda: Suspend codec at shutdown")
Reported-and-tested-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210826154752.25674-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
These patches fixup or update for rockchip i2s.
Changes in v3:
- Drop property 'rockchip,playback-only', 'rockchip,capture-only'.
Implement it by 'dma-names' of DT instead.
Changes in v2:
- split property trcm into single 'trcm-sync-tx-only' and
'trcm-sync-rx-only' suggested by Nicolas.
- split property trcm into single 'trcm-sync-tx-only' and
'trcm-sync-rx-only' suggested by Nicolas.
- drop change-id
Sugar Zhang (12):
ASoC: rockchip: i2s: Add support for set bclk ratio
ASoC: rockchip: i2s: Fixup clk div error
ASoC: rockchip: i2s: Improve dma data transfer efficiency
ASoC: rockchip: i2s: Fix regmap_ops hang
ASoC: rockchip: i2s: Fix concurrency between tx/rx
ASoC: rockchip: i2s: Reset the controller if soft reset failed
ASoC: dt-bindings: rockchip: Document reset property for i2s
ASoC: rockchip: i2s: Make playback/capture optional
ASoC: rockchip: i2s: Add compatible for more SoCs
ASoC: dt-bindings: rockchip: Add compatible strings for more SoCs
ASoC: rockchip: i2s: Add support for frame inversion
ASoC: dt-bindings: rockchip: i2s: Document property TRCM
Xiaotan Luo (1):
ASoC: rockchip: i2s: Fixup config for DAIFMT_DSP_A/B
Xing Zheng (1):
ASoC: rockchip: i2s: Add support for TRCM property
.../devicetree/bindings/sound/rockchip-i2s.yaml | 19 ++
sound/soc/rockchip/rockchip_i2s.c | 278 +++++++++++++++------
sound/soc/rockchip/rockchip_i2s.h | 10 +-
3 files changed, 224 insertions(+), 83 deletions(-)
--
2.7.4
- DSP_A: PCM delay 1 bit mode, L data MSB after FRM LRC
- DSP_B: PCM no delay mode, L data MSB during FRM LRC
Signed-off-by: Xiaotan Luo <lxt@rock-chips.com>
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Link: https://lore.kernel.org/r/1629950562-14281-3-git-send-email-sugar.zhang@rock-chips.com
Signed-off-by: Mark Brown <broonie@kernel.org>
MCLK maybe not precise as required because of PLL,
but which still can be used and no side effect. so,
using DIV_ROUND_CLOSEST instead div.
e.g.
set mclk to 11289600 Hz, but get 11289598 Hz.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Link: https://lore.kernel.org/r/1629950520-14190-2-git-send-email-sugar.zhang@rock-chips.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix the wrong button vol+ detection issue with some brand headsets
by fine tuning the threshold of button vol+ and SAR ADC button accuracy.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/20210825040346.28346-1-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Marking the two jack gpio as static fixes the following Sparse errors:
sound/soc/intel/boards/bytcr_rt5640.c:468:26: error: symbol 'rt5640_jack_gpio' was not declared. Should it be static?
sound/soc/intel/boards/bytcr_rt5640.c:475:26: error: symbol 'rt5640_jack2_gpio' was not declared. Should it be static?
Fixes: 9ba0085668 ("ASoC: Intel: bytcr_rt5640: Add support for HP Elite Pad 1000G2 jack-detect")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20210825122519.3364-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the following includecheck warning:
./sound/soc/sof/intel/pci-tng.c: shim.h is included more than once.
No functional change.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210824030015.57267-1-deng.changcheng@zte.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds support for mt8195 board with mt6359, rt1019 and rt5682.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20210819084144.18483-9-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds mt8195 adda dai driver.
audio_h clock is used by ADSP bus and ADDA module.
When ADDA requires audio_h clock, it is switched to APLL1, otherwise
it is switched to Xtal_26m so that APLL1 can be turned off when audio
feature is not used.
ADSP bus only requires that the clock is on, so dynamic reparenting
is used for the purpose of lowering power consumption.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://lore.kernel.org/r/20210819084144.18483-5-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds mt8195 tdm/i2s dai driver.
MCLK clock tree is as follows.
PLL -> MUX -> DIVIDER -> MCLK
For PLL source of MCLK, driver only supports APLL1 and APLL2 now.
APLL3 and APLL4 are used to track external clock source, so they are
only used when slave input is connected.
For example,
case 1: (HDMI RX connected)
DL memif (a1sys) -> etdm out2 (clk from apll1/apll2) -> codec
case 2: (HDMI RX disconnected)
HDMI RX -> a3sys -> UL memif (a3sys) -> DL memif (a3sys) -> .... ->
etdm out2 (clk from apll3) -> codec
We keep all modules in the pipeline working on the same clock domain.
MCLK is expected to output the clock generated from the same clock
source as the pipeline, so dynamic reparenting is required for MCLK
configuration.
As a result, clk_set_parent() is used to select PLL source,
and clk_set_rate() is used to configure divider to get MCLK output rate.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://lore.kernel.org/r/20210819084144.18483-4-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds mt8195 audio cg control.
Audio clock gates are registered to CCF for reference count and
clock parent management.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://lore.kernel.org/r/20210819084144.18483-3-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
