pwm4 is enabled if bit 2 of GPIO control register 4 is disabled,
not when it is enabled. Since the check is for the skip condition,
it is reversed. This applies to both IT8620 and IT8628.
Fixes: 36c4d98a78 ("hwmon: (it87) Add support for all pwm channels ...")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
If sensor attributes were never read, the pwm control data has not been
initiialized, which can cause wrong driver behavior. Ensure that cached
data is current before acting on it.
Cc: stable@vger.kernel.org # 4.4+
Reported-by: Kevin Folz <kfolz@evertz.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Configuration registers on ITE8622 are different to 8620 and 8628 and
require special handling. Also, the chip supports up to 5 pwm controls.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
IT8622E is similar to IT8620E, but only supports five pwm controls and
five fan tachometers.
Originally-from: Kevin Folz <kfolz@evertz.com>.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
On IT8622E and IT8628E, VIN3 is expected to be connected to +5V.
Add feature flag and reflect in input label.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
While looking through the __ex_table stuff I found that we do a linear
lookup of the module. Also fix up a comment.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Jessica Yu <jeyu@redhat.com>
If btrfs_decompress_buf2page() is handed a bio with its page in the
middle of the working buffer, then we adjust the offset into the working
buffer. After we copy into the bio, we advance the iterator by the
number of bytes we copied. Then, we have some logic to handle the case
of discontiguous pages and adjust the offset into the working buffer
again. However, if we didn't advance the bio to a new page, we may enter
this case in error, essentially repeating the adjustment that we already
made when we entered the function. The end result is bogus data in the
bio.
Previously, we only checked for this case when we advanced to a new
page, but the conversion to bio iterators changed that. This restores
the old, correct behavior.
A case I saw when testing with zlib was:
buf_start = 42769
total_out = 46865
working_bytes = total_out - buf_start = 4096
start_byte = 45056
The condition (total_out > start_byte && buf_start < start_byte) is
true, so we adjust the offset:
buf_offset = start_byte - buf_start = 2287
working_bytes -= buf_offset = 1809
current_buf_start = buf_start = 42769
Then, we copy
bytes = min(bvec.bv_len, PAGE_SIZE - buf_offset, working_bytes) = 1809
buf_offset += bytes = 4096
working_bytes -= bytes = 0
current_buf_start += bytes = 44578
After bio_advance(), we are still in the same page, so start_byte is the
same. Then, we check (total_out > start_byte && current_buf_start < start_byte),
which is true! So, we adjust the values again:
buf_offset = start_byte - buf_start = 2287
working_bytes = total_out - start_byte = 1809
current_buf_start = buf_start + buf_offset = 45056
But note that working_bytes was already zero before this, so we should
have stopped copying.
Fixes: 974b1adc3b ("btrfs: use bio iterators for the decompression handlers")
Reported-by: Pat Erley <pat-lkml@erley.org>
Reviewed-by: Chris Mason <clm@fb.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Tested-by: Liu Bo <bo.li.liu@oracle.com>
Currently the Exynos PCIe driver only supports the Exynos5440 SoC.
Refactor the driver to allow support for other Exynos SoC.
Following are the main changes in this patch:
1) Add separate structs for memory, clock resources
Future Exynos SoC will have different hardware resources such as iomem,
clocks, regmap handles, etc., so keeping these resources in separate
structs will let us initialize them via per-SoC ops and avoid littering
the code with of_machine_is_compatible().
2) Add exynos_pcie_ops struct which will allow us to support the
differences in resources in different Exynos SoC.
No functional change intended.
Signed-off-by: Niyas Ahmed S T <niyas.ahmed@samsung.com>
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Jingoo Han <jingoohan1@gmail.com>
Pull networking fixes from David Miller:
1) If the timing is wrong we can indefinitely stop generating new ipv6
temporary addresses, from Marcus Huewe.
2) Don't double free per-cpu stats in ipv6 SIT tunnel driver, from Cong
Wang.
3) Put protections in place so that AF_PACKET is not able to submit
packets which don't even have a link level header to drivers. From
Willem de Bruijn.
4) Fix memory leaks in ipv4 and ipv6 multicast code, from Hangbin Liu.
5) Don't use udp_ioctl() in l2tp code, UDP version expects a UDP socket
and that doesn't go over very well when it is passed an L2TP one.
Fix from Eric Dumazet.
6) Don't crash on NULL pointer in phy_attach_direct(), from Florian
Fainelli.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
l2tp: do not use udp_ioctl()
xen-netfront: Delete rx_refill_timer in xennet_disconnect_backend()
NET: mkiss: Fix panic
net: hns: Fix the device being used for dma mapping during TX
net: phy: Initialize mdio clock at probe function
igmp, mld: Fix memory leak in igmpv3/mld_del_delrec()
xen-netfront: Improve error handling during initialization
sierra_net: Skip validating irrelevant fields for IDLE LSIs
sierra_net: Add support for IPv6 and Dual-Stack Link Sense Indications
kcm: fix 0-length case for kcm_sendmsg()
xen-netfront: Rework the fix for Rx stall during OOM and network stress
net: phy: Fix PHY module checks and NULL deref in phy_attach_direct()
net: thunderx: Fix PHY autoneg for SGMII QLM mode
net: dsa: Do not destroy invalid network devices
ping: fix a null pointer dereference
packet: round up linear to header len
net: introduce device min_header_len
sit: fix a double free on error path
lwtunnel: valid encap attr check should return 0 when lwtunnel is disabled
ipv6: addrconf: fix generation of new temporary addresses
- Two security related issues in the rxe driver
- One compile issue in the RDMA uapi header
-----BEGIN PGP SIGNATURE-----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=zGBQ
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma fixes from Doug Ledford:
"Third round of -rc fixes for 4.10 kernel:
- two security related issues in the rxe driver
- one compile issue in the RDMA uapi header"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
RDMA: Don't reference kernel private header from UAPI header
IB/rxe: Fix mem_check_range integer overflow
IB/rxe: Fix resid update
Pull i2c bugfixes from Wolfram Sang:
"Two bugfixes (proper IO mapping and use of mutex) for a driver feature
we introduced in this cycle"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: piix4: Request the SMBUS semaphore inside the mutex
i2c: piix4: Fix request_region size
here is the last-minute fixes for 4.10 final (or -rc8): two fixes for
races in ALSA sequencer queue spotted by syzkaller, a revert for a
regression of LINE6 driver (since 4.9), and a trivial new codec ID
addition for Nvidia HDMI.
-----BEGIN PGP SIGNATURE-----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=CAxe
-----END PGP SIGNATURE-----
Merge tag 'sound-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Here are some last-minute fixes: two fixes for races in ALSA sequencer
queue spotted by syzkaller, a revert for a regression of LINE6 driver
(since 4.9), and a trivial new codec ID addition for Nvidia HDMI"
* tag 'sound-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - adding a new NV HDMI/DP codec ID in the driver
ALSA: seq: Fix race at creating a queue
Revert "ALSA: line6: Only determine control port properties if needed"
ALSA: seq: Don't handle loop timeout at snd_seq_pool_done()
fixable, but at least one of the fixes is a little ugly. The original
bug has always been there, so we can wait another week or two to get
this right.
-----BEGIN PGP SIGNATURE-----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=1kRc
-----END PGP SIGNATURE-----
Merge tag 'nfsd-4.10-3' of git://linux-nfs.org/~bfields/linux
Pull nfsd revert from Bruce Fields:
"This patch turned out to have a couple problems. The problems are
fixable, but at least one of the fixes is a little ugly. The original
bug has always been there, so we can wait another week or two to get
this right"
* tag 'nfsd-4.10-3' of git://linux-nfs.org/~bfields/linux:
nfsd: Revert "nfsd: special case truncates some more"
If device doesn't support as many MSI vectors as the driver requested, we
previously returned -EINVAL from __pci_enable_msi_range() and
pci_enable_msi_range(). In other similar situations in both
__pci_enable_msi_range() and __pci_enable_msix_range(), we returned
-ENOSPC.
Return -ENOSPC from __pci_enable_msi_range() so we do it consistently.
[bhelgaas: changelog]
Signed-off-by: Dennis Chen <dennis.chen@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Tejun Heo <tj@kernel.org>
CC: Christoph Hellwig <hch@lst.de>
CC: Tom Long Nguyen <tom.l.nguyen@intel.com>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC: Marc Zyngier <marc.zyngier@arm.com>
CC: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
CC: Steve Capper <steve.capper@arm.com>
Four fixes from Ben:
- Userspace was semi-randomly segfaulting on radix due to us incorrectly
handling a fault triggered by autonuma, caused by a patch we merged earlier
in v4.10 to prevent the kernel executing userspace.
- We weren't marking host IPIs properly for KVM in the OPAL ICP backend.
- The ERAT flushing on radix was missing an isync and was incorrectly marked
as DD1 only.
- The powernv CPU hotplug code was missing a wakeup type and failing to flush
the interrupt correctly when using OPAL ICP.
Thanks to:
Benjamin Herrenschmidt.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=yLmR
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes friom Michael Ellerman:
"Apologies for the late pull request, but Ben has been busy finding bugs.
- Userspace was semi-randomly segfaulting on radix due to us
incorrectly handling a fault triggered by autonuma, caused by a
patch we merged earlier in v4.10 to prevent the kernel executing
userspace.
- We weren't marking host IPIs properly for KVM in the OPAL ICP
backend.
- The ERAT flushing on radix was missing an isync and was incorrectly
marked as DD1 only.
- The powernv CPU hotplug code was missing a wakeup type and failing
to flush the interrupt correctly when using OPAL ICP
Thanks to Benjamin Herrenschmidt"
* tag 'powerpc-4.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/powernv: Properly set "host-ipi" on IPIs
powerpc/powernv: Fix CPU hotplug to handle waking on HVI
powerpc/mm/radix: Update ERAT flushes when invalidating TLB
powerpc/mm: Fix spurrious segfaults on radix with autonuma
Use pci_irq_alloc_vectors() and greatly simplify the code by managing the
vector number for the subservices directly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
It seems like there are some devices (e.g. the PCIe root port driver) that
may not always have a INTx interrupt. Check for dev->irq before returning
a legacy interrupt in pci_irq_alloc_vectors to properly handle this case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
After a brief discussion, we settled on a naming convention for the
conditional GEM debugging data that should be clearer to the casual
user: GEM_DEBUG
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170207102319.10910-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
rockchip_pcie_probe() calls of_pci_get_host_bridge_resources() to parse
resources from DT and build a resource list. The caller is responsible for
disposing of the resource list. This is normally done by
pci_release_host_bridge_dev() when the host bridge is removed.
If the host bridge probe fails, dispose of the resource list in the probe
error path.
[bhelgaas: changelog]
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The devfn of 00:02.0 is 0x10. devfn_to_wslot(0x10) == 0x2, and
wslot_to_devfn(0x2) should be 0x10, while it's 0x2 in the current code.
Due to this, hv_eject_device_work() -> pci_get_domain_bus_and_slot()
returns NULL and pci_stop_and_remove_bus_device() is not called.
Later when the real device driver's .remove() is invoked by
hv_pci_remove() -> pci_stop_root_bus(), some warnings can be noticed
because the VM has lost the access to the underlying device at that
time.
Signed-off-by: Jake Oshins <jakeo@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Haiyang Zhang <haiyangz@microsoft.com>
CC: stable@vger.kernel.org
CC: K. Y. Srinivasan <kys@microsoft.com>
CC: Stephen Hemminger <sthemmin@microsoft.com>
When updating the bookkeeping following the reset, we need the seqno to
be coherent on the CPU prior to trusting its result for deciding whether
any request is completed. We need the irq_barrier before we start making
these decisions, i.e. in reset_prepare.
References: https://bugs.freedesktop.org/show_bug.cgi?id=99733
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170210185214.23463-1-chris@chris-wilson.co.uk
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Function __pci_device_probe() tries to be careful about a PCI driver
probe() hook returning a positive value, but this is not really necessary,
since the same fix up is already done in local_pci_probe() (preceded by a
noisy warning), which renders this instance dead code.
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Add maintainers for this tunnel driver. Include main osmocom.org mailist
list too.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
udp_ioctl(), as its name suggests, is used by UDP protocols,
but is also used by L2TP :(
L2TP should use its own handler, because it really does not
look the same.
SIOCINQ for instance should not assume UDP checksum or headers.
Thanks to Andrey and syzkaller team for providing the report
and a nice reproducer.
While crashes only happen on recent kernels (after commit
7c13f97ffd ("udp: do fwd memory scheduling on dequeue")), this
probably needs to be backported to older kernels.
Fixes: 7c13f97ffd ("udp: do fwd memory scheduling on dequeue")
Fixes: 8558467201 ("udp: Fix udp_poll() and ioctl()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mickaël Salaün says:
====================
Improve BPF selftests and use the library (net-next tree)
This series brings some fixes to selftests, add the ability to test
unprivileged BPF programs as root and replace bpf_sys.h with calls to the BPF
library.
This is intended for the net-next tree and apply on c0e4dadb34 ("net: dsa:
mv88e6xxx: Move forward declaration to where it is needed").
Changes since v4:
* align text for function calls as requested by Daniel Borkmann
(bpf_load_program and bpf_map_update_elem)
* rebase
Changes since v3:
* keep the bzero() calls
Changes since v2:
* use the patches from two previous series (unprivileged tests and bpf_sys.h
replacement)
* include one more stdint.h
* rebase on net-next
* add this cover letter
Changes since v1:
* exclude patches not intended for the net-next tree
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
If selftests are run as root, then execute the unprivileged checks as
well. This switch from 243 to 368 tests.
The test numbers are suffixed with "/u" when executed as unprivileged or
with "/p" when executed as privileged.
The geteuid() check is replaced with a capability check.
Handling capabilities requires the libcap dependency.
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the tools include directory instead of the installed one to allow
builds from other kernels.
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The tools version of this header is out of date; update it to the latest
version from kernel header.
Synchronize with the following commits:
* b95a5c4db0 ("bpf: add a longest prefix match trie map implementation")
* a5e8c07059 ("bpf: add bpf_probe_read_str helper")
* d1b662adcd ("bpf: allow option for setting bpf_l4_csum_replace from scratch")
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Daniel Mack <daniel@zonque.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Gianluca Borello <g.borello@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski says:
====================
Netronome NFP4000 and NFP6000 PF driver
This is a base PF driver for Netronome NFP4000 and NFP6000 chips. This
series doesn't add any exciting new features, it provides a foundation
for supporting more advanced firmware applications.
Patch 1 moves a bitfield-related helper from our BPF code to the global
header.
Patch 2 renames the kernel module and adds a new main file. We were
considering 3-module approach (pf, vf, common netdev library) but
ultimately settled on a single module to keep things simple.
Patch 3 adds support for accessing chip internals. It provides a way of
configuring access windows to different parts of chip memory and issuing
pretty much any commands on chip's NoC.
Patches 4, 5, 6, 7, 8 provide support for accessing and interpreting
various hardware and firmware information structures.
Patch 9 introduces service processor (NSP) ABI. This ABI gives us
access to PHY/SFP module configuration and information as well as
methods for unloading and loading application firmware.
Patches 10 and 11 modify the existing netdev code to make it possible
to support multi-port devices (sharing a PCI device).
Patch 12 adds a new driver probe path which will be used for the PF
PCI device IDs. It utilizes the newly added infrastructure and is able
to load application FW and spawn netdevs for all card's ports.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add PF driver for NFP4000 and NFP6000.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
PF services multiple ports using single PCI device therefore
IRQs can no longer be allocated in the netdev code. Lower
portion of the driver has to allocate the IRQs and hand them
out to ports.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
PF driver will support multiple ports per PCI device, add port
number to DebugFS paths.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
NFP Service Processor (NSP) is an ARM core inside the chip which
is responsible for management and control functions. Add support
for chip reset, FW load and external module access using the NSP.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for using application FW symbol table to look up
location of information in device memory.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
MIP is a vector of information which linker can optionally include
in application firmware. It will be used to retrieve the location
of symbol tables.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
NFFW info is a resource which contains information about
the loaded application firmware. Add code which will allow
us to decode it and retrieve MIP location.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hwinfo is a simple key=value store of information which is read
from the flash and populated during chip power on. Add code to
look up information in it.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
