An I/O request of a User VM, which is constructed by the hypervisor, is
distributed by the ACRN Hypervisor Service Module to an I/O client
corresponding to the address range of the I/O request.
For each User VM, there is a shared 4-KByte memory region used for I/O
requests communication between the hypervisor and Service VM. An I/O
request is a 256-byte structure buffer, which is 'struct
acrn_io_request', that is filled by an I/O handler of the hypervisor
when a trapped I/O access happens in a User VM. ACRN userspace in the
Service VM first allocates a 4-KByte page and passes the GPA (Guest
Physical Address) of the buffer to the hypervisor. The buffer is used as
an array of 16 I/O request slots with each I/O request slot being 256
bytes. This array is indexed by vCPU ID.
An I/O client, which is 'struct acrn_ioreq_client', is responsible for
handling User VM I/O requests whose accessed GPA falls in a certain
range. Multiple I/O clients can be associated with each User VM. There
is a special client associated with each User VM, called the default
client, that handles all I/O requests that do not fit into the range of
any other I/O clients. The ACRN userspace acts as the default client for
each User VM.
The state transitions of a ACRN I/O request are as follows.
FREE -> PENDING -> PROCESSING -> COMPLETE -> FREE -> ...
FREE: this I/O request slot is empty
PENDING: a valid I/O request is pending in this slot
PROCESSING: the I/O request is being processed
COMPLETE: the I/O request has been processed
An I/O request in COMPLETE or FREE state is owned by the hypervisor. HSM
and ACRN userspace are in charge of processing the others.
The processing flow of I/O requests are listed as following:
a) The I/O handler of the hypervisor will fill an I/O request with
PENDING state when a trapped I/O access happens in a User VM.
b) The hypervisor makes an upcall, which is a notification interrupt, to
the Service VM.
c) The upcall handler schedules a worker to dispatch I/O requests.
d) The worker looks for the PENDING I/O requests, assigns them to
different registered clients based on the address of the I/O accesses,
updates their state to PROCESSING, and notifies the corresponding
client to handle.
e) The notified client handles the assigned I/O requests.
f) The HSM updates I/O requests states to COMPLETE and notifies the
hypervisor of the completion via hypercalls.
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Yu Wang <yu1.wang@intel.com>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Acked-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Link: https://lore.kernel.org/r/20210207031040.49576-10-shuo.a.liu@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The HSM provides hypervisor services to the ACRN userspace. While
launching a User VM, ACRN userspace needs to allocate memory and request
the ACRN Hypervisor to set up the EPT mapping for the VM.
A mapping cache is introduced for accelerating the translation between
the Service VM kernel virtual address and User VM physical address.
>From the perspective of the hypervisor, the types of GPA of User VM can be
listed as following:
1) RAM region, which is used by User VM as system ram.
2) MMIO region, which is recognized by User VM as MMIO. MMIO region is
used to be utilized for devices emulation.
Generally, User VM RAM regions mapping is set up before VM started and
is released in the User VM destruction. MMIO regions mapping may be set
and unset dynamically during User VM running.
To achieve this, ioctls ACRN_IOCTL_SET_MEMSEG and ACRN_IOCTL_UNSET_MEMSEG
are introduced in HSM.
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Yu Wang <yu1.wang@intel.com>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Link: https://lore.kernel.org/r/20210207031040.49576-9-shuo.a.liu@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When user gives us a block address to get its ID to mmap it, he also
needs to get from us the block size to pass to the driver in the mmap
function.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Oded writes:
This tag contains habanalabs driver changes for v5.12:
- Add feature called "staged command submissions". In this feature,
the driver allows the user to submit multiple command submissions
that describe a single pass on the deep learning graph. The driver
tracks the completion of the entire pass by the last stage CS.
- Update code to support the latest firmware image
- Optimizations and improvements to MMU code:
- Support page size that is not power-of-2
- Make the locks scheme simpler
- mmap areas in device configuration space to userspace
- Security fixes:
- Make ETR non-secured
- Remove access to kernel memory through debug-fs interface
- Remove access through PCI bar to SyncManager register block
in Gaudi
- Many small bug fixes
* tag 'misc-habanalabs-next-2021-01-27' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux: (41 commits)
habanalabs: update to latest hl_boot_if.h spec from F/W
habanalabs/gaudi: unmask HBM interrupts after handling
habanalabs: update SyncManager interrupt handling
habanalabs: fix ETR security issue
habanalabs: staged submission support
habanalabs: modify device_idle interface
habanalabs: add CS completion and timeout properties
habanalabs: add new mem ioctl op for mapping hw blocks
habanalabs: fix MMU debugfs related nodes
habanalabs: add user available interrupt to hw_ip
habanalabs: always try to use the hint address
CREDITS: update email address and home address
habanalabs: update email address in sysfs/debugfs docs
habanalabs: add security violations dump to debugfs
habanalabs: ignore F/W BMC errors in case no BMC present
habanalabs/gaudi: print sync manager SEI interrupt info
habanalabs: Use 'dma_set_mask_and_coherent()'
habanalabs/gaudi: remove PCI access to SM block
habanalabs: add driver support for internal cb scheduling
habanalabs: increment ctx ref from within a cs allocation
...
Currently this API uses single 64 bits mask for engines idle indication.
Recently, it was observed that more bits are needed for some ASICs.
This patch modifies the use of the idle mask and the idle_extensions
mask.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
For future ASIC support the driver allows user to map certain regions
in the device's configuration space for direct access from userspace.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In order to support completions that arrive directly to the user,
the driver needs to supply the user with the first available msix
interrupt available.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In order to support the staged submission feature, user must be
allowed to use the same CS sequence for all submissions in the
same staged submission.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Adding userspace support for the MC (Management Complex) means exporting
an ioctl capable device file representing the root resource container.
This new functionality in the fsl-mc bus driver intends to provide
userspace applications an interface to interact with the MC firmware.
Commands that are composed in userspace are sent to the MC firmware
through the FSL_MC_SEND_MC_COMMAND ioctl. By default the implicit MC
I/O portal is used for this operation, but if the implicit one is busy,
a dynamic portal is allocated and then freed upon execution.
The command received through the ioctl interface is checked against a
known whitelist of accepted MC commands. Commands that attempt a change
in hardware configuration will need CAP_NET_ADMIN, while commands used
in debugging do not need it.
Acked-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20210114170752.2927915-4-ciorneiioana@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull block fixes from Jens Axboe:
- Missing CRC32 selections (Arnd)
- Fix for a merge window regression with bdev inode init (Christoph)
- bcache fixes
- rnbd fixes
- NVMe pull request from Christoph:
- fix a race in the nvme-tcp send code (Sagi Grimberg)
- fix a list corruption in an nvme-rdma error path (Israel Rukshin)
- avoid a possible double fetch in nvme-pci (Lalithambika Krishnakumar)
- add the susystem NQN quirk for a Samsung driver (Gopal Tiwari)
- fix two compiler warnings in nvme-fcloop (James Smart)
- don't call sleeping functions from irq context in nvme-fc (James Smart)
- remove an unused argument (Max Gurtovoy)
- remove unused exports (Minwoo Im)
- Use-after-free fix for partition iteration (Ming)
- Missing blk-mq debugfs flag annotation (John)
- Bdev freeze regression fix (Satya)
- blk-iocost NULL pointer deref fix (Tejun)
* tag 'block-5.11-2021-01-10' of git://git.kernel.dk/linux-block: (26 commits)
bcache: set bcache device into read-only mode for BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET
bcache: introduce BCH_FEATURE_INCOMPAT_LOG_LARGE_BUCKET_SIZE for large bucket
bcache: check unsupported feature sets for bcache register
bcache: fix typo from SUUP to SUPP in features.h
bcache: set pdev_set_uuid before scond loop iteration
blk-mq-debugfs: Add decode for BLK_MQ_F_TAG_HCTX_SHARED
block/rnbd-clt: avoid module unload race with close confirmation
block/rnbd: Adding name to the Contributors List
block/rnbd-clt: Fix sg table use after free
block/rnbd-srv: Fix use after free in rnbd_srv_sess_dev_force_close
block/rnbd: Select SG_POOL for RNBD_CLIENT
block: pre-initialize struct block_device in bdev_alloc_inode
fs: Fix freeze_bdev()/thaw_bdev() accounting of bd_fsfreeze_sb
nvme: remove the unused status argument from nvme_trace_bio_complete
nvmet-rdma: Fix list_del corruption on queue establishment failure
nvme: unexport functions with no external caller
nvme: avoid possible double fetch in handling CQE
nvme-tcp: Fix possible race of io_work and direct send
nvme-pci: mark Samsung PM1725a as IGNORE_DEV_SUBNQN
nvme-fcloop: Fix sscanf type and list_first_entry_or_null warnings
...
Pull char/misc driver fixes from Greg KH:
"Here are some small char and misc driver fixes for 5.11-rc3.
The majority here are fixes for the habanalabs drivers, but also in
here are:
- crypto driver fix
- pvpanic driver fix
- updated font file
- interconnect driver fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (26 commits)
Fonts: font_ter16x32: Update font with new upstream Terminus release
misc: pvpanic: Check devm_ioport_map() for NULL
speakup: Add github repository URL and bug tracker
MAINTAINERS: Update Georgi's email address
crypto: asym_tpm: correct zero out potential secrets
habanalabs: Fix memleak in hl_device_reset
interconnect: imx8mq: Use icc_sync_state
interconnect: imx: Remove a useless test
interconnect: imx: Add a missing of_node_put after of_device_is_available
interconnect: qcom: fix rpmh link failures
habanalabs: fix order of status check
habanalabs: register to pci shutdown callback
habanalabs: add validation cs counter, fix misplaced counters
habanalabs/gaudi: retry loading TPC f/w on -EINTR
habanalabs: adjust pci controller init to new firmware
habanalabs: update comment in hl_boot_if.h
habanalabs/gaudi: enhance reset message
habanalabs: full FW hard reset support
habanalabs/gaudi: disable CGM at HW initialization
habanalabs: Revise comment to align with mirror list name
...
When large bucket feature was added, BCH_FEATURE_INCOMPAT_LARGE_BUCKET
was introduced into the incompat feature set. It used bucket_size_hi
(which was added at the tail of struct cache_sb_disk) to extend current
16bit bucket size to 32bit with existing bucket_size in struct
cache_sb_disk.
This is not a good idea, there are two obvious problems,
- Bucket size is always value power of 2, if store log2(bucket size) in
existing bucket_size of struct cache_sb_disk, it is unnecessary to add
bucket_size_hi.
- Macro csum_set() assumes d[SB_JOURNAL_BUCKETS] is the last member in
struct cache_sb_disk, bucket_size_hi was added after d[] which makes
csum_set calculate an unexpected super block checksum.
To fix the above problems, this patch introduces a new incompat feature
bit BCH_FEATURE_INCOMPAT_LOG_LARGE_BUCKET_SIZE, when this bit is set, it
means bucket_size in struct cache_sb_disk stores the order of power-of-2
bucket size value. When user specifies a bucket size larger than 32768
sectors, BCH_FEATURE_INCOMPAT_LOG_LARGE_BUCKET_SIZE will be set to
incompat feature set, and bucket_size stores log2(bucket size) more
than store the real bucket size value.
The obsoleted BCH_FEATURE_INCOMPAT_LARGE_BUCKET won't be used anymore,
it is renamed to BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET and still only
recognized by kernel driver for legacy compatible purpose. The previous
bucket_size_hi is renmaed to obso_bucket_size_hi in struct cache_sb_disk
and not used in bcache-tools anymore.
For cache device created with BCH_FEATURE_INCOMPAT_LARGE_BUCKET feature,
bcache-tools and kernel driver still recognize the feature string and
display it as "obso_large_bucket".
With this change, the unnecessary extra space extend of bcache on-disk
super block can be avoided, and csum_set() may generate expected check
sum as well.
Fixes: ffa4703275 ("bcache: add bucket_size_hi into struct cache_sb_disk for large bucket")
Signed-off-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org # 5.9+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull kvm fixes from Paolo Bonzini:
"x86:
- Fixes for the new scalable MMU
- Fixes for migration of nested hypervisors on AMD
- Fix for clang integrated assembler
- Fix for left shift by 64 (UBSAN)
- Small cleanups
- Straggler SEV-ES patch
ARM:
- VM init cleanups
- PSCI relay cleanups
- Kill CONFIG_KVM_ARM_PMU
- Fixup __init annotations
- Fixup reg_to_encoding()
- Fix spurious PMCR_EL0 access
Misc:
- selftests cleanups"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (38 commits)
KVM: x86: __kvm_vcpu_halt can be static
KVM: SVM: Add support for booting APs in an SEV-ES guest
KVM: nSVM: cancel KVM_REQ_GET_NESTED_STATE_PAGES on nested vmexit
KVM: nSVM: mark vmcb as dirty when forcingly leaving the guest mode
KVM: nSVM: correctly restore nested_run_pending on migration
KVM: x86/mmu: Clarify TDP MMU page list invariants
KVM: x86/mmu: Ensure TDP MMU roots are freed after yield
kvm: check tlbs_dirty directly
KVM: x86: change in pv_eoi_get_pending() to make code more readable
MAINTAINERS: Really update email address for Sean Christopherson
KVM: x86: fix shift out of bounds reported by UBSAN
KVM: selftests: Implement perf_test_util more conventionally
KVM: selftests: Use vm_create_with_vcpus in create_vm
KVM: selftests: Factor out guest mode code
KVM/SVM: Remove leftover __svm_vcpu_run prototype from svm.c
KVM: SVM: Add register operand to vmsave call in sev_es_vcpu_load
KVM: x86/mmu: Optimize not-present/MMIO SPTE check in get_mmio_spte()
KVM: x86/mmu: Use raw level to index into MMIO walks' sptes array
KVM: x86/mmu: Get root level from walkers when retrieving MMIO SPTE
KVM: x86/mmu: Use -1 to flag an undefined spte in get_mmio_spte()
...
Typically under KVM, an AP is booted using the INIT-SIPI-SIPI sequence,
where the guest vCPU register state is updated and then the vCPU is VMRUN
to begin execution of the AP. For an SEV-ES guest, this won't work because
the guest register state is encrypted.
Following the GHCB specification, the hypervisor must not alter the guest
register state, so KVM must track an AP/vCPU boot. Should the guest want
to park the AP, it must use the AP Reset Hold exit event in place of, for
example, a HLT loop.
First AP boot (first INIT-SIPI-SIPI sequence):
Execute the AP (vCPU) as it was initialized and measured by the SEV-ES
support. It is up to the guest to transfer control of the AP to the
proper location.
Subsequent AP boot:
KVM will expect to receive an AP Reset Hold exit event indicating that
the vCPU is being parked and will require an INIT-SIPI-SIPI sequence to
awaken it. When the AP Reset Hold exit event is received, KVM will place
the vCPU into a simulated HLT mode. Upon receiving the INIT-SIPI-SIPI
sequence, KVM will make the vCPU runnable. It is again up to the guest
to then transfer control of the AP to the proper location.
To differentiate between an actual HLT and an AP Reset Hold, a new MP
state is introduced, KVM_MP_STATE_AP_RESET_HOLD, which the vCPU is
placed in upon receiving the AP Reset Hold exit event. Additionally, to
communicate the AP Reset Hold exit event up to userspace (if needed), a
new exit reason is introduced, KVM_EXIT_AP_RESET_HOLD.
A new x86 ops function is introduced, vcpu_deliver_sipi_vector, in order
to accomplish AP booting. For VMX, vcpu_deliver_sipi_vector is set to the
original SIPI delivery function, kvm_vcpu_deliver_sipi_vector(). SVM adds
a new function that, for non SEV-ES guests, invokes the original SIPI
delivery function, kvm_vcpu_deliver_sipi_vector(), but for SEV-ES guests,
implements the logic above.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <e8fbebe8eb161ceaabdad7c01a5859a78b424d5e.1609791600.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
From the existing definitions it's unclear which stat to
use to report filtering based on L2 dst addr in old
broadcast-medium Ethernet.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from Jakub Kicinski:
"Networking fixes, including fixes from netfilter, wireless and bpf
trees.
Current release - regressions:
- mt76: fix NULL pointer dereference in mt76u_status_worker and
mt76s_process_tx_queue
- net: ipa: fix interconnect enable bug
Current release - always broken:
- netfilter: fixes possible oops in mtype_resize in ipset
- ath11k: fix number of coding issues found by static analysis tools
and spurious error messages
Previous releases - regressions:
- e1000e: re-enable s0ix power saving flows for systems with the
Intel i219-LM Ethernet controllers to fix power use regression
- virtio_net: fix recursive call to cpus_read_lock() to avoid a
deadlock
- ipv4: ignore ECN bits for fib lookups in fib_compute_spec_dst()
- sysfs: take the rtnl lock around XPS configuration
- xsk: fix memory leak for failed bind and rollback reservation at
NETDEV_TX_BUSY
- r8169: work around power-saving bug on some chip versions
Previous releases - always broken:
- dcb: validate netlink message in DCB handler
- tun: fix return value when the number of iovs exceeds MAX_SKB_FRAGS
to prevent unnecessary retries
- vhost_net: fix ubuf refcount when sendmsg fails
- bpf: save correct stopping point in file seq iteration
- ncsi: use real net-device for response handler
- neighbor: fix div by zero caused by a data race (TOCTOU)
- bareudp: fix use of incorrect min_headroom size and a false
positive lockdep splat from the TX lock
- mvpp2:
- clear force link UP during port init procedure in case
bootloader had set it
- add TCAM entry to drop flow control pause frames
- fix PPPoE with ipv6 packet parsing
- fix GoP Networking Complex Control config of port 3
- fix pkt coalescing IRQ-threshold configuration
- xsk: fix race in SKB mode transmit with shared cq
- ionic: account for vlan tag len in rx buffer len
- stmmac: ignore the second clock input, current clock framework does
not handle exclusive clock use well, other drivers may reconfigure
the second clock
Misc:
- ppp: change PPPIOCUNBRIDGECHAN ioctl request number to follow
existing scheme"
* tag 'net-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (99 commits)
net: dsa: lantiq_gswip: Fix GSWIP_MII_CFG(p) register access
net: dsa: lantiq_gswip: Enable GSWIP_MII_CFG_EN also for internal PHYs
net: lapb: Decrease the refcount of "struct lapb_cb" in lapb_device_event
r8169: work around power-saving bug on some chip versions
net: usb: qmi_wwan: add Quectel EM160R-GL
selftests: mlxsw: Set headroom size of correct port
net: macb: Correct usage of MACB_CAPS_CLK_HW_CHG flag
ibmvnic: fix: NULL pointer dereference.
docs: networking: packet_mmap: fix old config reference
docs: networking: packet_mmap: fix formatting for C macros
vhost_net: fix ubuf refcount incorrectly when sendmsg fails
bareudp: Fix use of incorrect min_headroom size
bareudp: set NETIF_F_LLTX flag
net: hdlc_ppp: Fix issues when mod_timer is called while timer is running
atlantic: remove architecture depends
erspan: fix version 1 check in gre_parse_header()
net: hns: fix return value check in __lb_other_process()
net: sched: prevent invalid Scell_log shift count
net: neighbor: fix a crash caused by mod zero
ipv4: Ignore ECN bits for fib lookups in fib_compute_spec_dst()
...
The set flag NFT_SET_EXPR provides a hint to the kernel that userspace
supports for multiple expressions per set element. In the same
direction, NFT_DYNSET_F_EXPR specifies that dynset expression defines
multiple expressions per set element.
This allows new userspace software with old kernels to bail out with
EOPNOTSUPP. This update is similar to ef516e8625 ("netfilter:
nf_tables: reintroduce the NFT_SET_CONCAT flag"). The NFT_SET_EXPR flag
needs to be set on when the NFTA_SET_EXPRESSIONS attribute is specified.
The NFT_SET_EXPR flag is not set on with NFTA_SET_EXPR to retain
backward compatibility in old userspace binaries.
Fixes: 48b0ae046e ("netfilter: nftables: netlink support for several set element expressions")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Up until now validation errors were counted in the parsing field
of the cs_counters struct, so we added a new counter and increased
it when needed.
In addition, there were some locations where only one of the counters
was updated (ctx or aggregate) so add the second one to be updated
as well.
Signed-off-by: Alon Mizrahi <amizrahi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Pull virtio updates from Michael Tsirkin:
- vdpa sim refactoring
- virtio mem: Big Block Mode support
- misc cleanus, fixes
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (61 commits)
vdpa: Use simpler version of ida allocation
vdpa: Add missing comment for virtqueue count
uapi: virtio_ids: add missing device type IDs from OASIS spec
uapi: virtio_ids.h: consistent indentions
vhost scsi: fix error return code in vhost_scsi_set_endpoint()
virtio_ring: Fix two use after free bugs
virtio_net: Fix error code in probe()
virtio_ring: Cut and paste bugs in vring_create_virtqueue_packed()
tools/virtio: add barrier for aarch64
tools/virtio: add krealloc_array
tools/virtio: include asm/bug.h
vdpa/mlx5: Use write memory barrier after updating CQ index
vdpa: split vdpasim to core and net modules
vdpa_sim: split vdpasim_virtqueue's iov field in out_iov and in_iov
vdpa_sim: make vdpasim->buffer size configurable
vdpa_sim: use kvmalloc to allocate vdpasim->buffer
vdpa_sim: set vringh notify callback
vdpa_sim: add set_config callback in vdpasim_dev_attr
vdpa_sim: add get_config callback in vdpasim_dev_attr
vdpa_sim: make 'config' generic and usable for any device type
...
Pull KVM updates from Paolo Bonzini:
"Much x86 work was pushed out to 5.12, but ARM more than made up for it.
ARM:
- PSCI relay at EL2 when "protected KVM" is enabled
- New exception injection code
- Simplification of AArch32 system register handling
- Fix PMU accesses when no PMU is enabled
- Expose CSV3 on non-Meltdown hosts
- Cache hierarchy discovery fixes
- PV steal-time cleanups
- Allow function pointers at EL2
- Various host EL2 entry cleanups
- Simplification of the EL2 vector allocation
s390:
- memcg accouting for s390 specific parts of kvm and gmap
- selftest for diag318
- new kvm_stat for when async_pf falls back to sync
x86:
- Tracepoints for the new pagetable code from 5.10
- Catch VFIO and KVM irqfd events before userspace
- Reporting dirty pages to userspace with a ring buffer
- SEV-ES host support
- Nested VMX support for wait-for-SIPI activity state
- New feature flag (AVX512 FP16)
- New system ioctl to report Hyper-V-compatible paravirtualization features
Generic:
- Selftest improvements"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (171 commits)
KVM: SVM: fix 32-bit compilation
KVM: SVM: Add AP_JUMP_TABLE support in prep for AP booting
KVM: SVM: Provide support to launch and run an SEV-ES guest
KVM: SVM: Provide an updated VMRUN invocation for SEV-ES guests
KVM: SVM: Provide support for SEV-ES vCPU loading
KVM: SVM: Provide support for SEV-ES vCPU creation/loading
KVM: SVM: Update ASID allocation to support SEV-ES guests
KVM: SVM: Set the encryption mask for the SVM host save area
KVM: SVM: Add NMI support for an SEV-ES guest
KVM: SVM: Guest FPU state save/restore not needed for SEV-ES guest
KVM: SVM: Do not report support for SMM for an SEV-ES guest
KVM: x86: Update __get_sregs() / __set_sregs() to support SEV-ES
KVM: SVM: Add support for CR8 write traps for an SEV-ES guest
KVM: SVM: Add support for CR4 write traps for an SEV-ES guest
KVM: SVM: Add support for CR0 write traps for an SEV-ES guest
KVM: SVM: Add support for EFER write traps for an SEV-ES guest
KVM: SVM: Support string IO operations for an SEV-ES guest
KVM: SVM: Support MMIO for an SEV-ES guest
KVM: SVM: Create trace events for VMGEXIT MSR protocol processing
KVM: SVM: Create trace events for VMGEXIT processing
...
Merge still more updates from Andrew Morton:
"18 patches.
Subsystems affected by this patch series: mm (memcg and cleanups) and
epoll"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm/Kconfig: fix spelling mistake "whats" -> "what's"
selftests/filesystems: expand epoll with epoll_pwait2
epoll: wire up syscall epoll_pwait2
epoll: add syscall epoll_pwait2
epoll: convert internal api to timespec64
epoll: eliminate unnecessary lock for zero timeout
epoll: replace gotos with a proper loop
epoll: pull all code between fetch_events and send_event into the loop
epoll: simplify and optimize busy loop logic
epoll: move eavail next to the list_empty_careful check
epoll: pull fatal signal checks into ep_send_events()
epoll: simplify signal handling
epoll: check for events when removing a timed out thread from the wait queue
mm/memcontrol:rewrite mem_cgroup_page_lruvec()
mm, kvm: account kvm_vcpu_mmap to kmemcg
mm/memcg: remove unused definitions
mm/memcg: warning on !memcg after readahead page charged
mm/memcg: bail early from swap accounting if memcg disabled
The OASIS virtio spec (1.1) defines several IDs that aren't reflected
in the header yet. Fixing this by adding the missing IDs, even though
they're not yet used by the kernel yet.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Link: https://lore.kernel.org/r/20201202111931.31953-2-info@metux.net
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Pull more drm updates from Daniel Vetter:
"UAPI Changes:
- Only enable char/agp uapi when CONFIG_DRM_LEGACY is set
Cross-subsystem Changes:
- vma_set_file helper to make vma->vm_file changing less brittle,
acked by Andrew
Core Changes:
- dma-buf heaps improvements
- pass full atomic modeset state to driver callbacks
- shmem helpers: cached bo by default
- cleanups for fbdev, fb-helpers
- better docs for drm modes and SCALING_FITLER uapi
- ttm: fix dma32 page pool regression
Driver Changes:
- multi-hop regression fixes for amdgpu, radeon, nouveau
- lots of small amdgpu hw enabling fixes (display, pm, ...)
- fixes for imx, mcde, meson, some panels, virtio, qxl, i915, all
fairly minor
- some cleanups for legacy drm/fbdev drivers"
* tag 'drm-next-2020-12-18' of git://anongit.freedesktop.org/drm/drm: (117 commits)
drm/qxl: don't allocate a dma_address array
drm/nouveau: fix multihop when move doesn't work.
drm/i915/tgl: Fix REVID macros for TGL to fetch correct stepping
drm/i915: Fix mismatch between misplaced vma check and vma insert
drm/i915/perf: also include Gen11 in OATAILPTR workaround
Revert "drm/i915: re-order if/else ladder for hpd_irq_setup"
drm/amdgpu/disply: fix documentation warnings in display manager
drm/amdgpu: print mmhub client name for dimgrey_cavefish
drm/amdgpu: set mode1 reset as default for dimgrey_cavefish
drm/amd/display: Add get_dig_frontend implementation for DCEx
drm/radeon: remove h from printk format specifier
drm/amdgpu: remove h from printk format specifier
drm/amdgpu: Fix spelling mistake "Heterogenous" -> "Heterogeneous"
drm/amdgpu: fix regression in vbios reservation handling on headless
drm/amdgpu/SRIOV: Extend VF reset request wait period
drm/amdkfd: correct amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu log.
drm/amd/display: Adding prototype for dccg21_update_dpp_dto()
drm/amdgpu: print what method we are using for runtime pm
drm/amdgpu: simplify logic in atpx resume handling
drm/amdgpu: no need to call pci_ignore_hotplug for _PR3
...
Pull GPIO updates from Linus Walleij:
"This is the bulk of the GPIO changes for the v5.11 kernel cycle:
Core changes:
- Retired the old set-up function for GPIO IRQ chips. All chips now
use the template struct gpio_irq_chip and pass that to the core to
be set up alongside the gpio_chip. We can finally get rid of the
old cruft.
- Some refactoring and clean up of the core code.
- Support edge event timestamps to be stamped using REALTIME (wall
clock) timestamps. We have found solid use cases for this, so we
support it.
New drivers:
- MStar MSC313 GPIO driver.
- HiSilicon GPIO driver.
Driver improvements:
- The PCA953x driver now also supports the NXP PCAL9554B/C chips.
- The mockup driver can now be probed from the device tree which is
pretty useful for virtual prototyping of devices.
- The Rcar driver now supports .get_multiple()
- The MXC driver dropped some legacy and became a pure device tree
client.
- The Exar driver was moved over to the IDA interface for
enumerating, and also switched over to using regmap for register
access"
* tag 'gpio-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (87 commits)
MAINTAINERS: Remove reference to non-existing file
gpio: hisi: Do not require ACPI for COMPILE_TEST
MAINTAINERS: Add maintainer for HiSilicon GPIO driver
gpio: gpio-hisi: Add HiSilicon GPIO support
gpio: cs5535: Simplify the return expression of cs5535_gpio_probe()
gpiolib: irq hooks: fix recursion in gpiochip_irq_unmask
dt-bindings: mt7621-gpio: convert bindings to YAML format
gpiolib: cdev: Flag invalid GPIOs as used
gpio: put virtual gpio device into their own submenu
drivers: gpio: amd8111: use SPDX-License-Identifier
drivers: gpio: amd8111: prefer dev_err()/dev_info() over raw printk
drivers: gpio: bt8xx: prefer dev_err()/dev_warn() over of raw printk
gpio: Add TODO item for debugfs interface
gpio: just plain warning when nonexisting gpio requested
tools: gpio: add option to report wall-clock time to gpio-event-mon
tools: gpio: add support for reporting realtime event clock to lsgpio
gpiolib: cdev: allow edge event timestamps to be configured as REALTIME
gpio: msc313: MStar MSC313 GPIO driver
dt-bindings: gpio: Binding for MStar MSC313 GPIO controller
dt-bindings: gpio: Add a binding header for the MSC313 GPIO driver
...
Pull cifs updates from Steve French:
"The largest part are for support of the newer mount API which has been
needed for cifs/smb3 mounts for a long time due to the new API's
better handling of remount, and better error reporting. There are
three additional small cleanup patches for this being tested, that are
not included yet.
This series also includes addition of support for the SMB3 witness
protocol which can provide important notifications from the server to
client on server address or export or network changes. This can be
useful for example in order to be notified before the failure - when a
server's IP address changes (in the future it will allow us to support
server notifications of when a share is moved).
It also includes three patches for stable e.g. some that better handle
some confusing error messages during session establishment"
* tag '5.11-rc-smb3' of git://git.samba.org/sfrench/cifs-2.6: (55 commits)
cifs: update internal module version number
cifs: Fix support for remount when not changing rsize/wsize
cifs: handle "guest" mount parameter
cifs: correct four aliased mount parms to allow use of previous names
cifs: Tracepoints and logs for tracing credit changes.
cifs: fix use after free in cifs_smb3_do_mount()
cifs: fix rsize/wsize to be negotiated values
cifs: Fix some error pointers handling detected by static checker
smb3: remind users that witness protocol is experimental
cifs: update super_operations to show_devname
cifs: fix uninitialized variable in smb3_fs_context_parse_param
cifs: update mnt_cifs_flags during reconfigure
cifs: move update of flags into a separate function
cifs: remove ctx argument from cifs_setup_cifs_sb
cifs: do not allow changing posix_paths during remount
cifs: uncomplicate printing the iocharset parameter
cifs: don't create a temp nls in cifs_setup_ipc
cifs: simplify handling of cifs_sb/ctx->local_nls
cifs: we do not allow changing username/password/unc/... during remount
cifs: add initial reconfigure support
...
Pull networking fixes from Jakub Kicinski:
"Current release - always broken:
- net/smc: fix access to parent of an ib device
- devlink: use _BITUL() macro instead of BIT() in the UAPI header
- handful of mptcp fixes
Previous release - regressions:
- intel: AF_XDP: clear the status bits for the next_to_use descriptor
- dpaa2-eth: fix the size of the mapped SGT buffer
Previous release - always broken:
- mptcp: fix security context on server socket
- ethtool: fix string set id check
- ethtool: fix error paths in ethnl_set_channels()
- lan743x: fix rx_napi_poll/interrupt ping-pong
- qca: ar9331: fix sleeping function called from invalid context bug"
* tag 'net-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (32 commits)
net/sched: sch_taprio: reset child qdiscs before freeing them
nfp: move indirect block cleanup to flower app stop callback
octeontx2-af: Fix undetected unmap PF error check
net: nixge: fix spelling mistake in Kconfig: "Instuments" -> "Instruments"
qlcnic: Fix error code in probe
mptcp: fix pending data accounting
mptcp: push pending frames when subflow has free space
mptcp: properly annotate nested lock
mptcp: fix security context on server socket
net/mlx5: Fix compilation warning for 32-bit platform
mptcp: clear use_ack and use_map when dropping other suboptions
devlink: use _BITUL() macro instead of BIT() in the UAPI header
net: korina: fix return value
net/smc: fix access to parent of an ib device
ethtool: fix error paths in ethnl_set_channels()
nfc: s3fwrn5: Remove unused NCI prop commands
nfc: s3fwrn5: Remove the delay for NFC sleep
phy: fix kdoc warning
tipc: do sanity check payload of a netlink message
use __netdev_notify_peers in hyperv
...
Pull dmaengine updates from Vinod Koul:
"The last dmaengine updates for this year :)
This contains couple of new drivers, new device support and updates to
bunch of drivers.
New drivers/devices:
- Qualcomm ADM driver
- Qualcomm GPI driver
- Allwinner A100 DMA support
- Microchip Sama7g5 support
- Mediatek MT8516 apdma
Updates:
- more updates to idxd driver and support for IAX config
- runtime PM support for dw driver
- TI drivers"
* tag 'dmaengine-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (75 commits)
soc: ti: k3-ringacc: Use correct error casting in k3_ringacc_dmarings_init
dmaengine: ti: k3-udma-glue: Add support for K3 PKTDMA
dmaengine: ti: k3-udma: Initial support for K3 PKTDMA
dmaengine: ti: k3-udma: Add support for BCDMA channel TPL handling
dmaengine: ti: k3-udma: Initial support for K3 BCDMA
soc: ti: k3-ringacc: add AM64 DMA rings support.
dmaengine: ti: Add support for k3 event routers
dmaengine: ti: k3-psil: Add initial map for AM64
dmaengine: ti: k3-psil: Extend psil_endpoint_config for K3 PKTDMA
dt-bindings: dma: ti: Add document for K3 PKTDMA
dt-bindings: dma: ti: Add document for K3 BCDMA
dmaengine: dmatest: Use dmaengine_get_dma_device
dmaengine: doc: client: Update for dmaengine_get_dma_device() usage
dmaengine: Add support for per channel coherency handling
dmaengine: of-dma: Add support for optional router configuration callback
dmaengine: ti: k3-udma-glue: Configure the dma_dev for rings
dmaengine: ti: k3-udma-glue: Get the ringacc from udma_dev
dmaengine: ti: k3-udma-glue: Add function to get device pointer for DMA API
dmaengine: ti: k3-udma: Add support for second resource range from sysfw
dmaengine: ti: k3-udma: Wait for peer teardown completion if supported
...
Pull fuse updates from Miklos Szeredi:
- Improve performance of virtio-fs in mixed read/write workloads
- Try to revalidate cache before returning EEXIST on exclusive create
- Add a couple of miscellaneous bug fixes as well as some code cleanups
* tag 'fuse-update-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: fix bad inode
fuse: support SB_NOSEC flag to improve write performance
fuse: add a flag FUSE_OPEN_KILL_SUIDGID for open() request
fuse: don't send ATTR_MODE to kill suid/sgid for handle_killpriv_v2
fuse: setattr should set FATTR_KILL_SUIDGID
fuse: set FUSE_WRITE_KILL_SUIDGID in cached write path
fuse: rename FUSE_WRITE_KILL_PRIV to FUSE_WRITE_KILL_SUIDGID
fuse: introduce the notion of FUSE_HANDLE_KILLPRIV_V2
fuse: always revalidate if exclusive create
virtiofs: clean up error handling in virtio_fs_get_tree()
fuse: add fuse_sb_destroy() helper
fuse: simplify get_fuse_conn*()
fuse: get rid of fuse_mount refcount
virtiofs: simplify sb setup
virtiofs fix leak in setup
fuse: launder page should wait for page writeback
Pull f2fs updates from Jaegeuk Kim:
"In this round, we've made more work into per-file compression support.
For example, F2FS_IOC_GET | SET_COMPRESS_OPTION provides a way to
change the algorithm or cluster size per file. F2FS_IOC_COMPRESS |
DECOMPRESS_FILE provides a way to compress and decompress the existing
normal files manually.
There is also a new mount option, compress_mode=fs|user, which can
control who compresses the data.
Chao also added a checksum feature with a mount option so that
we are able to detect any corrupted cluster.
In addition, Daniel contributed casefolding with encryption patch,
which will be used for Android devices.
Summary:
Enhancements:
- add ioctls and mount option to manage per-file compression feature
- support casefolding with encryption
- support checksum for compressed cluster
- avoid IO starvation by replacing mutex with rwsem
- add sysfs, max_io_bytes, to control max bio size
Bug fixes:
- fix use-after-free issue when compression and fsverity are enabled
- fix consistency corruption during fault injection test
- fix data offset for lseek
- get rid of buffer_head which has 32bits limit in fiemap
- fix some bugs in multi-partitions support
- fix nat entry count calculation in shrinker
- fix some stat information
And, we've refactored some logics and fix minor bugs as well"
* tag 'f2fs-for-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (36 commits)
f2fs: compress: fix compression chksum
f2fs: fix shift-out-of-bounds in sanity_check_raw_super()
f2fs: fix race of pending_pages in decompression
f2fs: fix to account inline xattr correctly during recovery
f2fs: inline: fix wrong inline inode stat
f2fs: inline: correct comment in f2fs_recover_inline_data
f2fs: don't check PAGE_SIZE again in sanity_check_raw_super()
f2fs: convert to F2FS_*_INO macro
f2fs: introduce max_io_bytes, a sysfs entry, to limit bio size
f2fs: don't allow any writes on readonly mount
f2fs: avoid race condition for shrinker count
f2fs: add F2FS_IOC_DECOMPRESS_FILE and F2FS_IOC_COMPRESS_FILE
f2fs: add compress_mode mount option
f2fs: Remove unnecessary unlikely()
f2fs: init dirty_secmap incorrectly
f2fs: remove buffer_head which has 32bits limit
f2fs: fix wrong block count instead of bytes
f2fs: use new conversion functions between blks and bytes
f2fs: rename logical_to_blk and blk_to_logical
f2fs: fix kbytes written stat for multi-device case
...
The BIT() macro is not available for the UAPI headers. Moreover, it can
be defined differently in user space headers. Thus, replace its usage
with the _BITUL() macro which is already used in other macro definitions
in <linux/devlink.h>.
Fixes: dc64cc7c63 ("devlink: Add devlink reload limit option")
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Link: https://lore.kernel.org/r/20201215102531.16958-1-tklauser@distanz.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull VFIO updates from Alex Williamson:
- Fix uninitialized list walk in error path (Eric Auger)
- Use io_remap_pfn_range() (Jason Gunthorpe)
- Allow fallback support for NVLink on POWER8 (Alexey Kardashevskiy)
- Enable mdev request interrupt with CCW support (Eric Farman)
- Enable interface to iommu_domain from vfio_group (Lu Baolu)
* tag 'vfio-v5.11-rc1' of git://github.com/awilliam/linux-vfio:
vfio/type1: Add vfio_group_iommu_domain()
vfio-ccw: Wire in the request callback
vfio-mdev: Wire in a request handler for mdev parent
vfio/pci/nvlink2: Do not attempt NPU2 setup on POWER8NVL NPU
vfio-pci: Use io_remap_pfn_range() for PCI IO memory
vfio/pci: Move dummy_resources_list init in vfio_pci_probe()
Pull HID updates from Jiri Kosina:
- AMD SFH (Sensor Fusion Hub) support (Sandeep Singh)
- increase of maximum HID report size to 16KB in order to support some
of the modern devices (Dean Camera)
- control interface support for hidraw (Dean Camera)
- Sony DS4 power and firmware reporting fixes (Roderick Colenbrander)
- support for ghlive PS3/WII U dongles (Pascal Giard)
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (27 commits)
HID: i2c-hid: add Vero K147 to descriptor override
HID: ite: Add support for Acer S1002 keyboard-dock
HID: sony: support for ghlive ps3/wii u dongles
HID: hidraw: Add additional hidraw input/output report ioctls.
HID: Increase HID maximum report size to 16KB
HID: elecom: drop stray comment
HID: mf: add support for 0079:1846 Mayflash/Dragonrise USB Gamecube Adapter
HID: elecom: add support for EX-G M-XGL20DLBK wireless mouse
HID: elecom: rewrite report based on model specific parameters
HID: wacom: Constify attribute_groups
HID: input: Fix fall-through warnings for Clang
HID: usbhid: Fix fall-through warnings for Clang
HID: logitech-hidpp: Add hid_device_id for V470 bluetooth mouse
HID: intel-ish-hid: Remove unnecessary assignment to variable rv
HID: sony: Workaround for DS4 dongle hotplug kernel crash.
HID: sony: Don't use fw_version/hw_version for sysfs cleanup.
HID: sony: Report more accurate DS4 power status.
SFH: fix error return check for -ERESTARTSYS
HID: SFH: Add documentation
HID: hid-input: occasionally report stylus battery even if not changed
...
Pull rdma updates from Jason Gunthorpe:
"A smaller set of patches, nothing stands out as being particularly
major this cycle. The biggest item would be the new HIP09 HW support
from HNS, otherwise it was pretty quiet for new work here:
- Driver bug fixes and updates: bnxt_re, cxgb4, rxe, hns, i40iw,
cxgb4, mlx4 and mlx5
- Bug fixes and polishing for the new rts ULP
- Cleanup of uverbs checking for allowed driver operations
- Use sysfs_emit all over the place
- Lots of bug fixes and clarity improvements for hns
- hip09 support for hns
- NDR and 50/100Gb signaling rates
- Remove dma_virt_ops and go back to using the IB DMA wrappers
- mlx5 optimizations for contiguous DMA regions"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (147 commits)
RDMA/cma: Don't overwrite sgid_attr after device is released
RDMA/mlx5: Fix MR cache memory leak
RDMA/rxe: Use acquire/release for memory ordering
RDMA/hns: Simplify AEQE process for different types of queue
RDMA/hns: Fix inaccurate prints
RDMA/hns: Fix incorrect symbol types
RDMA/hns: Clear redundant variable initialization
RDMA/hns: Fix coding style issues
RDMA/hns: Remove unnecessary access right set during INIT2INIT
RDMA/hns: WARN_ON if get a reserved sl from users
RDMA/hns: Avoid filling sl in high 3 bits of vlan_id
RDMA/hns: Do shift on traffic class when using RoCEv2
RDMA/hns: Normalization the judgment of some features
RDMA/hns: Limit the length of data copied between kernel and userspace
RDMA/mlx4: Remove bogus dev_base_lock usage
RDMA/uverbs: Fix incorrect variable type
RDMA/core: Do not indicate device ready when device enablement fails
RDMA/core: Clean up cq pool mechanism
RDMA/core: Update kernel documentation for ib_create_named_qp()
MAINTAINERS: SOFT-ROCE: Change Zhu Yanjun's email address
...
Pull SCSI updates from James Bottomley:
"This consists of the usual driver updates (ufs, qla2xxx, smartpqi,
target, zfcp, fnic, mpt3sas, ibmvfc) plus a load of cleanups, a major
power management rework and a load of assorted minor updates.
There are a few core updates (formatting fixes being the big one) but
nothing major this cycle"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits)
scsi: mpt3sas: Update driver version to 36.100.00.00
scsi: mpt3sas: Handle trigger page after firmware update
scsi: mpt3sas: Add persistent MPI trigger page
scsi: mpt3sas: Add persistent SCSI sense trigger page
scsi: mpt3sas: Add persistent Event trigger page
scsi: mpt3sas: Add persistent Master trigger page
scsi: mpt3sas: Add persistent trigger pages support
scsi: mpt3sas: Sync time periodically between driver and firmware
scsi: qla2xxx: Update version to 10.02.00.104-k
scsi: qla2xxx: Fix device loss on 4G and older HBAs
scsi: qla2xxx: If fcport is undergoing deletion complete I/O with retry
scsi: qla2xxx: Fix the call trace for flush workqueue
scsi: qla2xxx: Fix flash update in 28XX adapters on big endian machines
scsi: qla2xxx: Handle aborts correctly for port undergoing deletion
scsi: qla2xxx: Fix N2N and NVMe connect retry failure
scsi: qla2xxx: Fix FW initialization error on big endian machines
scsi: qla2xxx: Fix crash during driver load on big endian machines
scsi: qla2xxx: Fix compilation issue in PPC systems
scsi: qla2xxx: Don't check for fw_started while posting NVMe command
scsi: qla2xxx: Tear down session if FW say it is down
...
Pull io_uring updates from Jens Axboe:
"Fairly light set of changes this time around, and mostly some bits
that were pushed out to 5.11 instead of 5.10, fixes/cleanups, and a
few features. In particular:
- Cleanups around iovec import (David Laight, Pavel)
- Add timeout support for io_uring_enter(2), which enables us to
clean up liburing and avoid a timeout sqe submission in the
completion path.
The big win here is that it allows setups that split SQ and CQ
handling into separate threads to avoid locking, as the CQ side
will no longer submit when timeouts are needed when waiting for
events (Hao Xu)
- Add support for socket shutdown, and renameat/unlinkat.
- SQPOLL cleanups and improvements (Xiaoguang Wang)
- Allow SQPOLL setups for CAP_SYS_NICE, and enable regular
(non-fixed) files to be used.
- Cancelation improvements (Pavel)
- Fixed file reference improvements (Pavel)
- IOPOLL related race fixes (Pavel)
- Lots of other little fixes and cleanups (mostly Pavel)"
* tag 'for-5.11/io_uring-2020-12-14' of git://git.kernel.dk/linux-block: (43 commits)
io_uring: fix io_cqring_events()'s noflush
io_uring: fix racy IOPOLL flush overflow
io_uring: fix racy IOPOLL completions
io_uring: always let io_iopoll_complete() complete polled io
io_uring: add timeout update
io_uring: restructure io_timeout_cancel()
io_uring: fix files cancellation
io_uring: use bottom half safe lock for fixed file data
io_uring: fix miscounting ios_left
io_uring: change submit file state invariant
io_uring: check kthread stopped flag when sq thread is unparked
io_uring: share fixed_file_refs b/w multiple rsrcs
io_uring: replace inflight_wait with tctx->wait
io_uring: don't take fs for recvmsg/sendmsg
io_uring: only wake up sq thread while current task is in io worker context
io_uring: don't acquire uring_lock twice
io_uring: initialize 'timeout' properly in io_sq_thread()
io_uring: refactor io_sq_thread() handling
io_uring: always batch cancel in *cancel_files()
io_uring: pass files into kill timeouts/poll
...
Pull asm-generic cleanups from Arnd Bergmann:
"These are a couple of compiler warning fixes to make 'make W=2' less
noisy, as well as some fixes to code comments in asm-generic"
* tag 'asm-generic-cleanup-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
syscalls: Fix file comments for syscalls implemented in kernel/sys.c
ctype.h: remove duplicate isdigit() helper
qspinlock: use signed temporaries for cmpxchg
asm-generic: fix ffs -Wshadow warning
asm-generic: percpu: avoid Wshadow warning
asm-generic/sembuf: Update architecture related information in comment
Pull close_range/openat2 updates from Christian Brauner:
"This contains a fix for openat2() to make RESOLVE_BENEATH and
RESOLVE_IN_ROOT mutually exclusive. It doesn't make sense to specify
both at the same time. The openat2() selftests have been extended to
verify that these two flags can't be specified together.
This also adds the CLOSE_RANGE_CLOEXEC flag to close_range() which
allows to mark a range of file descriptors as close-on-exec without
actually closing them.
This is useful in general but the use-case that triggered the patch is
installing a seccomp profile in the calling task before exec. If the
seccomp profile wants to block the close_range() syscall it obviously
can't use it to close all fds before exec. If it calls close_range()
before installing the seccomp profile it needs to take care not to
close fds that it will still need before the exec meaning it would
have to call close_range() multiple times on different ranges and then
still fall back to closing fds one by one right before the exec.
CLOSE_RANGE_CLOEXEC allows to solve this problem relying on the exec
codepath to get rid of the unwanted fds. The close_range() tests have
been expanded to verify that CLOSE_RANGE_CLOEXEC works"
* tag 'close-range-openat2-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
selftests: core: add tests for CLOSE_RANGE_CLOEXEC
fs, close_range: add flag CLOSE_RANGE_CLOEXEC
selftests: openat2: add RESOLVE_ conflict test
openat2: reject RESOLVE_BENEATH|RESOLVE_IN_ROOT
Pull btrfs updates from David Sterba:
"We have a mix of all kinds of changes, feature updates, core stuff,
performance improvements and lots of cleanups and preparatory changes.
User visible:
- export filesystem generation in sysfs
- new features for mount option 'rescue':
- what's currently supported is exported in sysfs
- 'ignorebadroots'/'ibadroots' - continue even if some essential
tree roots are not usable (extent, uuid, data reloc, device,
csum, free space)
- 'ignoredatacsums'/'idatacsums' - skip checksum verification on
data
- 'all' - now enables 'ignorebadroots' + 'ignoredatacsums' +
'nologreplay'
- export read mirror policy settings to sysfs, new policies will be
added in the future
- remove inode number cache feature (mount -o inode_cache), obsoleted
in 5.9
User visible fixes:
- async discard scheduling fixes on high loads
- update inode byte counter atomically so stat() does not report
wrong value in some cases
- free space tree fixes:
- correctly report status of v2 after remount
- clear v1 cache inodes when v2 is newly enabled after remount
Core:
- switch own tree lock implementation to standard rw semaphore:
- one-level lock nesting is not required anymore, the last use of
this was in free space that's now loaded asynchronously
- own implementation of adaptive spinning before taking mutex has
been part of rwsem
- performance seems to be better in general, much better (+tens
of percents) for some workloads
- lockdep does not complain
- finish direct IO conversion to iomap infrastructure, remove
temporary workaround for DSYNC after iomap API updates
- preparatory work to support data and metadata blocks smaller than
page:
- generalize code that assumes sectorsize == PAGE_SIZE, lots of
refactoring
- planned namely for 64K pages (eg. arm64, ppc64)
- scrub read-only support
- preparatory work for zoned allocation mode (SMR/ZBC/ZNS friendly):
- disable incompatible features
- round-robin superblock write
- free space cache (v1) is loaded asynchronously, remove tree path
recursion
- slightly improved time tacking for transaction kthread wake ups
Performance improvements (note that the numbers depend on load type or
other features and weren't run on the same machine):
- skip unnecessary work:
- do not start readahead for csum tree when scrubbing non-data
block groups
- do not start and wait for delalloc on snapshot roots on
transaction commit
- fix race when defragmenting leads to unnecessary IO
- dbench speedups (+throughput%/-max latency%):
- skip unnecessary searches for xattrs when logging an inode
(+10.8/-8.2)
- stop incrementing log batch when joining log transaction (1-2)
- unlock path before checking if extent is shared during nocow
writeback (+5.0/-20.5), on fio load +9.7% throughput/-9.8%
runtime
- several tree log improvements, eg. removing unnecessary
operations, fixing races that lead to additional work
(+12.7/-8.2)
- tree-checker error branches annotated with unlikely() (+3%
throughput)
Other:
- cleanups
- lockdep fixes
- more btrfs_inode conversions
- error variable cleanups"
* tag 'for-5.11-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (198 commits)
btrfs: scrub: allow scrub to work with subpage sectorsize
btrfs: scrub: support subpage data scrub
btrfs: scrub: support subpage tree block scrub
btrfs: scrub: always allocate one full page for one sector for RAID56
btrfs: scrub: reduce width of extent_len/stripe_len from 64 to 32 bits
btrfs: refactor btrfs_lookup_bio_sums to handle out-of-order bvecs
btrfs: remove btrfs_find_ordered_sum call from btrfs_lookup_bio_sums
btrfs: handle sectorsize < PAGE_SIZE case for extent buffer accessors
btrfs: update num_extent_pages to support subpage sized extent buffer
btrfs: don't allow tree block to cross page boundary for subpage support
btrfs: calculate inline extent buffer page size based on page size
btrfs: factor out btree page submission code to a helper
btrfs: make btrfs_verify_data_csum follow sector size
btrfs: pass bio_offset to check_data_csum() directly
btrfs: rename bio_offset of extent_submit_bio_start_t to dio_file_offset
btrfs: fix lockdep warning when creating free space tree
btrfs: skip space_cache v1 setup when not using it
btrfs: remove free space items when disabling space cache v1
btrfs: warn when remount will not change the free space tree
btrfs: use superblock state to print space_cache mount option
...
