Commit Graph

1543 Commits

Author SHA1 Message Date
Linus Torvalds
fc2bb8d1cd Merge branch 'i2c-embedded/for-3.4' of git://git.pengutronix.de/git/wsa/linux
Pull i2c embedded updates from Wolfram Sang:
 "Nothing special from i2c-embedded for this merge window.  Two new
  drivers, minor feature additions, bugfixes, cleanups.

  All patches have been in linux-next for some time, too."

* 'i2c-embedded/for-3.4' of git://git.pengutronix.de/git/wsa/linux:
  i2c-eg20t: Remove write-only variables
  i2c-eg20t: Rework pch_i2c_wait_for_bus_idle to reduce wait time
  i2c-s3c2410: Add stub runtime power management
  i2c-s3c2410: Convert to devm_kzalloc()
  i2c: add CSR SiRFprimaII on-chip I2C controllers driver
  i2c: tegra: Remove unnecessary write to INT_STATUS
  i2c: imx: fix imx driver to work though signal is pending
  i2c: designware: dw_i2c_init_driver as subsys initcall
  misc: at24: describe platform_data with kernel_doc
  i2c: Move I2C_EG20T option to the right place.
  i2c: Support for Netlogic XLR/XLS I2C controller.
  i2c: mpc: Add support for SMBUS_READ_BLOCK_DATA
  i2c: versatile: Add Device Tree support
2012-03-23 14:12:04 -07:00
Linus Torvalds
be53bfdb80 Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux
Pull drm main changes from Dave Airlie:
 "This is the main drm pull request, I'm probably going to send two more
  smaller ones, will explain below.

  This contains a patch that is also in the fbdev tree, but it should be
  the same patch, it added an API for hot unplugging framebuffer
  devices, and I need that API for a new driver.

  It also contains some changes to the i2c tree which Jean has acked,
  and one change to moorestown platform stuff in x86.

  Highlights:
   - new drivers: UDL driver for USB displaylink devices, kms only,
     should support correct hotplug operations.
   - core: i2c speedups + better hotplug support, EDID overriding via
     firmware interface - allows user to load a firmware for a broken
     monitor/kvm from userspace, it even has documentation for it.
   - exynos: new HDMI audio + hdmi 1.4 + virtual output driver
   - gma500: code cleanup
   - radeon: cleanups, CS optimisations, streamout support and pageflip
     fix
   - nouveau: NVD9 displayport support + more reclocking work
   - i915: re-enabling GMBUS, finish gpu patch (might help hibernation
     who knows), missed irq fixes, stencil tiling fixes, interlaced
     support, aliasesd PPGTT support for SNB/IVB, swizzling for SNB/IVB,
     semaphore fixes

  As well as the usual bunch of cleanups and fixes all over the place.

  I've got two things I'd like to merge a bit later:

   a) AMD support for all their new radeonhd 7000 series GPU and APUs.
      AMD dropped this a bit late due to insane internal review
      processes, (please AMD just follow Intel and let open source guys
      ship stuff early) however I don't want to penalise people who own
      this hardware (since its been on sale for 3-4 months and GPU hw
      doesn't exactly have a lifetime in years) and consign them to
      using closed drivers for longer than necessary.  The changes are
      well contained and just plug into the driver new gpu functionality
      so they should be fairly regression proof.  I just want to give
      them a bit of a run on the hw AMD kindly sent me.

   b) drm prime/dma-buf interface code.  This is just infrastructure
      code to expose the dma-buf stuff to drm drivers and to userspace.
      I'm not planning on pushing any driver support in this cycle
      (except maybe exynos), but I'd like to get the infrastructure code
      in so for the next cycle I can start getting the driver support
      into the individual drivers.  We have started driver support for
      i915, nouveau and udl along with I think exynos and omap in
      staging.  However this code relies on the dma-buf tree being
      pulled into your tree first since it needs the latest interfaces
      from that tree.  I'll push to get that tree sent asap.

  (oh and any warnings you see in i915 are gcc's fault from what anyone
  can see)."

Fix up trivial conflicts in arch/x86/platform/mrst/mrst.c due to the new
msic_thermal_platform_data() thermal function being added next to the
tc35876x_platform_data() i2c device function..

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (326 commits)
  drm/i915: use DDC_ADDR instead of hard-coding it
  drm/radeon: use DDC_ADDR instead of hard-coding it
  drm: remove unneeded redefinition of DDC_ADDR
  drm/exynos: added virtual display driver.
  drm: allow loading an EDID as firmware to override broken monitor
  drm/exynos: enable hdmi audio feature
  drm/exynos: add default pixel format for plane
  drm/exynos: cleanup exynos_hdmi.h
  drm/exynos: add is_local member in exynos_drm_subdrv struct
  drm/exynos: add subdrv open/close functions
  drm/exynos: remove module of exynos drm subdrv
  drm/exynos: release pending pageflip events when closed
  drm/exynos: added new funtion to get/put dma address.
  drm/exynos: update gem and buffer framework.
  drm/exynos: added mode_fixup feature and code clean.
  drm/exynos: add HDMI version 1.4 support
  drm/exynos: remove exynos_mixer.h
  gma500: Fix mmap frambuffer
  drm/radeon: Drop radeon_gem_object_(un)pin.
  drm/radeon: Restrict offset for legacy display engine.
  ...
2012-03-22 13:08:22 -07:00
Dave Airlie
de49442f59 Merge tag 'drm-intel-next-2012-03-01' of git://people.freedesktop.org/~danvet/drm-intel into drm-next
* tag 'drm-intel-next-2012-03-01' of git://people.freedesktop.org/~danvet/drm-intel:
  drm/i915: Only clear the GPU domains upon a successful finish
  drm/i915: reenable gmbus on gen3+ again
  drm/i915: i2c: unconditionally set up gpio fallback
  drm/i915: merge gmbus and gpio i2c adpater into one
  drm/i915: merge struct intel_gpio into struct intel_gmbus
  i2c: export bit-banging algo functions
  drm/nouveau: do a better job at hiding the NIH i2c bit-banging algo
  drm/i915: add dev_priv to intel_gmbus
  drm/i915: Fix single msg gmbus_xfers writes
  drm/i915: error_buffer->ring should be signed
  drm/i915: Silence the error message from i915_wait_request()
  drm/i915: use the new hdmi_force_audio enum more
  drm/i915: No need to search again after retiring requests
  drm/i915: Only bump refcnt on objects scheduled for eviction
  drm/i915/bios: Downgrade the "signature missing" DRM_ERROR to debug
  drm/i915: Ignore LVDS on hp t5745 and hp st5747 thin client
  drm/i915: Fixes distorted external screen image on HP 2730p
2012-03-20 08:51:37 +00:00
Ville Syrjala
8ee161ce5e i2c-algo-bit: Fix spurious SCL timeouts under heavy load
When the system is under heavy load, there can be a significant delay
between the getscl() and time_after() calls inside sclhi(). That delay
may cause the time_after() check to trigger after SCL has gone high,
causing sclhi() to return -ETIMEDOUT.

To fix the problem, double check that SCL is still low after the
timeout has been reached, before deciding to return -ETIMEDOUT.

Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Cc: stable@vger.kernel.org
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-03-15 18:11:05 +01:00
Wolfram Sang
834aa6f30c i2c-core: Comment says "transmitted" but means "received"
Fix that. Also convert this and the related comment to proper commenting
style.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-03-15 18:11:05 +01:00
Alexander Stein
bbceeee82e i2c-eg20t: Remove write-only variables
Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-03-07 19:26:22 +01:00
Alexander Stein
0836c80901 i2c-eg20t: Rework pch_i2c_wait_for_bus_idle to reduce wait time
If you insert several i2c transfers, the driver might start the next one
while the STOP bit of the previous transfer is still on the bus, marking
the bus as busy.
pch_i2c_wait_for_bus_idle does an msleep(20) delaying the next transfer
by >=20ms. Reduce wait time by actively waiting 5 us once, then using
usleep_range.

Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Acked-by: Tomoya MORINAGA <tomoya.rohm@gmail.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-03-07 19:07:04 +01:00
Mark Brown
c62c3ca55e i2c-s3c2410: Add stub runtime power management
Add stub runtime_pm calls which go through the flow of enabling and
disabling but don't actually do anything with the device itself as
there's nothing useful we can do. This provides the core PM framework
with information about when the device is idle, enabling chip wide
power savings.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-03-07 19:06:59 +01:00
Mark Brown
4ea1557ff7 i2c-s3c2410: Convert to devm_kzalloc()
Saves remembering to call kfree(). There's some kfree()s used by the
resource still, these will be removed in 3.3 using the newly added
devm_request_and_ioremap().

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-03-07 19:06:53 +01:00
Zhiwu Song
979b907fa5 i2c: add CSR SiRFprimaII on-chip I2C controllers driver
SiRFprimaII is the latest generation application processor from CSR’s
multi-function SoC product family.
The SoC support codes are in arch/arm/mach-prima2 from Linux mainline
3.0.
There are two I2C controllers on primaII, features include:
* Two I2C controller modules are on chip
* RISC I/O bus read write register
* Up to 16 bytes data buffer for issuing commands and writing data
  at the same time
* Up to 16 commands, and receiving read data 16 bytes at a time
* Error INT report (ACK check)
* No-ACK bus protocols (SCCB bus protocols)

Signed-off-by: Zhiwu Song <Zhiwu.Song@csr.com>
Signed-off-by: Xiangzhen Ye <Xiangzhen.Ye@csr.com>
Signed-off-by: Yuping Luo <Yuping.Luo@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-03-07 19:05:04 +01:00
Alok Chauhan
bf6c2de11c i2c: tegra: Remove unnecessary write to INT_STATUS
The write is not necessary and may cause the I2C controller to misbehave.
With this fix, I2C on Tegra30 works (at least, running i2cdump repeatedly
on the WM8903 on Cardhu's I2C5/DVC bus).

Signed-off-by: Alok Chauhan <alokc@nvidia.com>
[swarren: Reworded commit description]
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-03-07 19:04:06 +01:00
Daniel Vetter
b0209b3995 i2c: export bit-banging algo functions
i915 has a hw i2c controller (gmbus) but for a bunch of stupid reasons
we need to be able to fall back to the bit-banging algo on gpio pins.

The current code sets up a 2nd i2c controller for the same i2c bus using
the bit-banging algo. This has a bunch of issues, the major one being
that userspace can directly access this fallback i2c adaptor behind
the drivers back.

But we need to frob a few registers before and after using fallback
gpio bit-banging, so this horribly fails.

The new plan is to only set up one i2c adaptor and transparently fall
back to bit-banging by directly calling the xfer function of the bit-
banging algo in the i2c core.

To make that possible, export the 2 i2c algo functions.

v2: As suggested by Jean Delvare, simply export the i2c_bit_algo
vtable instead of the individual functions.

Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-02-29 20:47:42 +01:00
Oskar Schirmer
bb79a0798d i2c: imx: fix imx driver to work though signal is pending
Interrupt a test application for I2C based mc13xxx driven
touch panel, SIGINT, causes open event file descriptor to be
closed, which in turn causes I2C activity to mask PMIC local
interrupts. This eventually ends up in i2c_imx_bus_busy to
wait for some busy flag to toggle, but while waiting it would
find a signal pending and break. The final symptom is the
device is not closed down cleanly and thus not reopenable.

Do without check for pending signal.

Signed-off-by: Oskar Schirmer <oskar@scara.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-02-29 20:21:24 +01:00
Pratyush Anand
104522806a i2c: designware: dw_i2c_init_driver as subsys initcall
There are few drivers which are available on i2c bus but have been initialized
with subsys_initcall. Also as I2C is a bus driver, it should be available as
early as possible.

Signed-off-by: Pratyush Anand <pratyush.anand@st.com>
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>

[wsa: Slightly updated the commit message]

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-02-29 20:21:03 +01:00
Wolfram Sang
844990daa2 i2c: mxs: only flag completion when queue is completely done
The hardware generates an interrupt for every completed command in the
queue while the code assumed that it will only generate one interrupt
when the queue is empty. So, explicitly check if the queue is really
empty. This patch fixed problems which occurred due to high traffic on
the bus. While we are here, move the completion-initialization after the
parameter error checking.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Lothar Waßmann <LW@KARO-electronics.de>
Cc: stable@kernel.org
2012-02-24 22:28:27 +01:00
Jayachandran C
3e1b76be0b i2c: Move I2C_EG20T option to the right place.
Move Kconfig option for I2C_EG20T to the correct position and keep
the options sorted.

Also, use tabs in Makefile and move the I2C_EG20T entry to its
position.

Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-02-24 22:25:58 +01:00
Ganesan Ramalingam
401c3434c4 i2c: Support for Netlogic XLR/XLS I2C controller.
Add support for the intergrated I2C controller on Netlogic
XLR/XLS MIPS SoC.

The changes are to add a new file i2c/buses/i2c-xlr.c, containing the
i2c bus implementation, and to update i2c/buses/{Kconfig,Makefile} to
add the CONFIG_I2C_XLR option.

Signed-off-by: Ganesan Ramalingam <ganesanr@netlogicmicro.com>
Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-02-24 22:25:57 +01:00
Tang Yuantian
3f0e1e4bb6 i2c: mpc: Add support for SMBUS_READ_BLOCK_DATA
Add support for SMBUS_READ_BLOCK_DATA to the i2c-mpc bus driver.

Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-02-24 22:25:30 +01:00
Pawel Moll
237ab4062d i2c: versatile: Add Device Tree support
This patch adds Device Tree binding ("arm,versatile-i2c") and
basic support (bus population) to versatile-i2c driver.

Signed-off-by: Pawel Moll <pawel.moll@arm.com>

[wsa: constified match-table]

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-02-24 22:25:07 +01:00
Arnd Bergmann
0dcd627896 Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/olof/tegra into fixes
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/olof/tegra:
  ARM: tegra: paz00: fix wrong UART port on mini-pcie plug
  ARM: tegra: paz00: fix wrong SD1 power gpio
  i2c: tegra: Add devexit_p() for remove
  ARM: tegra: dma: fix buildbreak for !CONFIG_TEGRA_SYSTEM_DMA
2012-02-13 05:40:38 +00:00
Shubhrajyoti Datta
218d06d794 i2c: tegra: Add devexit_p() for remove
It was originally missed in the __devinit/__devexit annotations.

Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
2012-02-06 18:32:45 -08:00
Cousson, Benoit
6c5aa407d5 i2c: OMAP: Fix OMAP1 build error
CONFIG_OF is not defined for OMAP1 yet and thus the omap1_defconfig build
generate an error for 3.3-rc1.

drivers/i2c/busses/i2c-omap.c: In function 'omap_i2c_probe':
drivers/i2c/busses/i2c-omap.c:1021:26: error: 'omap_i2c_of_match' undeclared (first use in this function)
drivers/i2c/busses/i2c-omap.c:1021:26: note: each undeclared identifier is reported only once for each function it appears in

Wrap omap_i2c_of_match with of_match_ptr() to prevent compilation error in case of OMAP1 build.

Signed-off-by: Benoit Cousson <b-cousson@ti.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-01-20 08:24:22 -08:00
Ben Dooks
6f36a806e5 Merge branches 'for-33/i2c/eg20t' and 'for-33/i2c/omap' into for-linus/i2c-33 2012-01-17 23:30:41 +00:00
Tomoya MORINAGA
8956dc102c i2c-eg20t: Change-company-name-OKI-SEMICONDUCTOR to LAPIS Semiconductor
On October 1 in 2011,
OKI SEMICONDUCTOR Co., Ltd. changed the company name in to LAPIS Semiconductor Co., Ltd.

Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.lapis-semi.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2012-01-17 23:29:56 +00:00
Tomoya MORINAGA
c3f4661f55 i2c-eg20t: Support new device LAPIS Semiconductor ML7831 IOH
ML7831 is companion chip for Intel Atom E6xx series.

Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.lapis-semi.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2012-01-17 23:29:52 +00:00
Toshiharu Okada
ff35e8b189 i2c-eg20t: modified the setting of transfer rate.
This patch modified the setting value of
I2C Bus Transfer Rate Setting Counter regisrer.

Signed-off-by: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2012-01-17 23:28:18 +00:00
Feng Tang
07e8a51ff6 i2c-eg20t: use i2c_add_numbered_adapter to get a fixed bus number
For EG20T and ML7213 IOH, the i2c controller numbers are fixed, using
fixed bus number will make it much easier for platform code to use
i2c_register_board_info() to register i2c devices.

Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2012-01-17 23:24:37 +00:00
Benoit Cousson
6145197be6 i2c: OMAP: Add DT support for i2c controller
Add initial DT support to retrieve the frequency using a
DT attribute instead of the pdata pointer if of_node exist.

Add documentation for omap i2c controller binding.

Based on original patches from Manju and Grant.

Signed-off-by: Benoit Cousson <b-cousson@ti.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Reviewed-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-01-17 22:44:57 +00:00
Jan Weitzel
78e1cf42ee I2C: OMAP: NACK without STP
On OMAP4 OMAP_I2C_STAT_NACK is causing a timeout on the next access.
The isr cleans all flags in OMAP_I2C_CON_REG by setting OMAP_I2C_CON_STP
OMAP_I2C_CON_STP is also set in omap_i2c_xfer_msg on the last message.

According to the TI TSR the sequence for OMAP_I2C_STAT_NACK and
OMAP_I2C_STAT_AL are nearly the same.
Removing the OMAP_I2C_CON_STP part in the isr fix the problem.
Tested on OMAP4430 and OMAP3530 (here NACK was not a problem)
Fixes also booting on 2430sdp.

Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-01-17 22:44:54 +00:00
Alexander Aring
2727b17539 I2C: OMAP: correct SYSC register offset for OMAP4
Correct OMAP_I2C_SYSC_REG offset in omap4 register map.
Offset 0x20 is reserved and OMAP_I2C_SYSC_REG has 0x10 as offset.

Signed-off-by: Alexander Aring <a.aring@phytec.de>
[khilman@ti.com: minor changelog edits]
Cc: stable@vger.kernel.org
Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-01-17 22:44:52 +00:00
Linus Torvalds
4964e0664c Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (119 commits)
  MIPS: Delete unused function add_temporary_entry.
  MIPS: Set default pci cache line size.
  MIPS: Flush huge TLB
  MIPS: Octeon: Remove SYS_SUPPORTS_HIGHMEM.
  MIPS: Octeon: Add support for OCTEON II PCIe
  MIPS: Octeon: Update PCI Latency timer and enable more error reporting.
  MIPS: Alchemy: Update cpu-feature-overrides
  MIPS: Alchemy: db1200: Improve PB1200 detection.
  MIPS: Alchemy: merge Au1000 and Au1300-style IRQ controller code.
  MIPS: Alchemy: chain IRQ controllers to MIPS IRQ controller
  MIPS: Alchemy: irq: register pm at irq init time
  MIPS: Alchemy: Touchscreen support on DB1100
  MIPS: Alchemy: Hook up IrDA on DB1000/DB1100
  net/irda: convert au1k_ir to platform driver.
  MIPS: Alchemy: remove unused board headers
  MTD: nand: make au1550nd.c a platform_driver
  MIPS: Netlogic: Mark Netlogic chips as SMT capable
  MIPS: Netlogic: Add support for XLP 3XX cores
  MIPS: Netlogic: Merge some of XLR/XLP wakup code
  MIPS: Netlogic: Add default XLP config.
  ...

Fix up trivial conflicts in arch/mips/kernel/{perf_event_mipsxx.c,
traps.c} and drivers/tty/serial/Makefile
2012-01-14 13:05:21 -08:00
Linus Torvalds
0a80939b3e Autogenerated GPG tag for Rusty D1ADB8F1: 15EE 8D6C AB0E 7F0C F999 BFCB D920 0E6C D1AD B8F1
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPD2aFAAoJENkgDmzRrbjxNzsQAIeYbbrXYLjr6kQzUSngj/eC
 FzjaTEfYTQIeuQCFJHcHthyc5lXV4sQbo3jOezW+Bp5yuDJL2aWIHesSfWZe7imu
 zQdM4VshOYdAmUR9Q0AW5zhB8Smbs7/AyABiF2jm4p0ZPOuyMDSlei9sjvE9Vjvt
 B7g5ht7L6kz0JbDnwwy0u5gs+tEitwpXYId9Y4ysZIBzIbL0qkPX8veOddGTMy0N
 8xhWXaKtufpjvxFD2ORLDsw3AkoF1xXSNuFd/5nzCNpbeE7TW931jfkPoqJumuAO
 7GLxcU9kKYl+IICobC6wBtsj/RrB7w+cBXMvPGwdBliam1qaRhUcJZi5FLM/Ha5d
 2A9QDYNUpoXiO8JbPXrV9Z+Y0+Co8RilsQj7R/rjZh6AbbYCWt9nxzx2Svl/RfTr
 xfiimHuB2P3rHjOvpCXULwOOuE5c8MzPuWncpdjiD3uGXOY/aY+X1m+if/quJw9D
 grPlKL0+YiRakEYUeGG4M77KCqyKFZaF7L7UQPbqfZcj8V/9AW3/7U5I/B9RlAjs
 idsr4fcf5s0N+oKUyTCW1ncpUDQNiwbU2NyJQqeu1ZxaRGj72AgyvsaNeyIPDyK+
 f6x95Bi7i8KLjXc9Z1KvJwh2Nxt25gNUiTYVha/9H2NpJGd1cfI15kTOGXrgddVv
 1pvuGcJDZwYiwfiXr3FL
 =HHrh
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://github.com/rustyrussell/linux

Autogenerated GPG tag for Rusty D1ADB8F1: 15EE 8D6C AB0E 7F0C F999  BFCB D920 0E6C D1AD B8F1

* tag 'for-linus' of git://github.com/rustyrussell/linux:
  module_param: check that bool parameters really are bool.
  intelfbdrv.c: bailearly is an int module_param
  paride/pcd: fix bool verbose module parameter.
  module_param: make bool parameters really bool (drivers & misc)
  module_param: make bool parameters really bool (arch)
  module_param: make bool parameters really bool (core code)
  kernel/async: remove redundant declaration.
  printk: fix unnecessary module_param_name.
  lirc_parallel: fix module parameter description.
  module_param: avoid bool abuse, add bint for special cases.
  module_param: check type correctness for module_param_array
  modpost: use linker section to generate table.
  modpost: use a table rather than a giant if/else statement.
  modules: sysfs - export: taint, coresize, initsize
  kernel/params: replace DEBUGP with pr_debug
  module: replace DEBUGP with pr_debug
  module: struct module_ref should contains long fields
  module: Fix performance regression on modules with large symbol tables
  module: Add comments describing how the "strmap" logic works

Fix up conflicts in scripts/mod/file2alias.c due to the new linker-
generated table approach to adding __mod_*_device_table entries.  The
ARM sa11x0 mcp bus needed to be converted to that too.
2012-01-14 12:32:16 -08:00
Rusty Russell
90ab5ee941 module_param: make bool parameters really bool (drivers & misc)
module_param(bool) used to counter-intuitively take an int.  In
fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy
trick.

It's time to remove the int/unsigned int option.  For this version
it'll simply give a warning, but it'll break next kernel version.

Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-13 09:32:20 +10:30
Axel Lin
245e99cfe8 i2c/gpio-i2cmux: Convert to use module_platform_driver()
Convert gpio-i2cmux to use the module_platform_driver() macro which
makes the code smaller and a bit simpler.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Peter Korsgaard <peter.korsgaard@barco.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-01-12 20:32:04 +01:00
Axel Lin
a3664b51c7 i2c/busses: Use module_platform_driver()
Convert the drivers in drivers/i2c/busses/* to use the
module_platform_driver() macro which makes the code smaller and a bit
simpler.

Cc: Ben Dooks <ben-linux@fluff.org>
Acked-by: Jochen Friedrich <jochen@scram.de>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Manuel Lauss <manuel.lauss@googlemail.com>
Cc: Barry Song <21cnbao@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Yong Zhang <yong.zhang0@gmail.com>
Cc: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-01-12 20:32:04 +01:00
Thomas Meyer
a699ed6f1f i2c-dev: Use memdup_user
Use memdup_user rather than duplicating its implementation.
This is a little bit restricted to reduce false positives.

The semantic patch that makes this output is available
in scripts/coccinelle/api/memdup_user.cocci.

More information about semantic patching is available at
http://coccinelle.lip6.fr/

Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-01-12 20:32:04 +01:00
Axel Lin
3527bd5045 i2c: Convert to DEFINE_PCI_DEVICE_TABLE
Convert static struct pci_device_id *[] to static DEFINE_PCI_DEVICE_TABLE
tables.

Use DEFINE_PCI_DEVICE_TABLE ensures we make the pci_device_id table const
and marked as __devinitconst.

This also fixes some warnings from checkpatch:
e.g.
WARNING: Use DEFINE_PCI_DEVICE_TABLE for struct pci_device_id
#1096: FILE: i2c/busses/i2c-intel-mid.c:1096:
+static struct pci_device_id intel_mid_i2c_ids[] = {

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Cc: Rudolf Marek <r.marek@assembler.cz>
Cc: Ben Dooks <ben-linux@fluff.org>
Acked-by: Olof Johansson <olof@lixom.net>
Cc: "Mark M. Hoffman" <mhoffman@lightlink.com>
Acked-by: Dirk Brandewie <dirk.brandewie@gmail.com>
Cc: Tomoya MORINAGA <tomoya-linux@dsn.lapis-semi.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-01-12 20:32:04 +01:00
corentin.labbe
65a2d74b76 i2c-ali1535: enable SPARC support
The i2c-ali1535 driver doesn't work on SPARC, because it assumes that
ioport address are 16-bit wide (address stored in an unsigned short).
But on SPARC arch, ioports are mapped in memory and so must be stored
in an unsigned long.

Use pci_resource_start for getting IOMEM base address, then read the
SMBBA of the i2c bus and use these together for I/O access.

I would like to thank Jean DELVARE for reviewing my patch.

Signed-off-by: LABBE Corentin <corentin.labbe@geomatys.fr>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-01-12 20:32:04 +01:00
Jean Delvare
7c1f59c9d5 i2c: Fix error value returned by several bus drivers
When adding checks for ACPI resource conflicts to many bus drivers,
not enough attention was paid to the error paths, and for several
drivers this causes 0 to be returned on error in some cases. Fix this
by properly returning a non-zero value on every error.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: stable@kernel.org
2012-01-12 20:32:03 +01:00
Linus Torvalds
c2e08e7ce5 Merge branch 'unicore32' of git://github.com/gxt/linux
* 'unicore32' of git://github.com/gxt/linux:
  rtc-puv3: solve section mismatch in rtc-puv3.c
  rtc-puv3: using module_platform_driver()
  i2c-puv3: using module_platform_driver()
  rtc-puv3: irq: remove IRQF_DISABLED
  unicore32: Remove IRQF_DISABLED
  unicore32: Use set_current_blocked()
  unicore32: add ioremap_nocache definition
  unicore32: delete specified xlate_dev_mem_ptr
  of: add include asm/setup.h in drivers/of/fdt.c
  unicore32: standardize /proc/iomem "Kernel code" name
2012-01-10 17:37:20 -08:00
Guan Xuetao
858af58f67 i2c-puv3: using module_platform_driver()
This patch converts the driver to use the module_platform_driver()
macro which makes the code smaller and a bit simpler.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
2012-01-10 10:29:41 +08:00
Linus Torvalds
2ac9d7aacc Driver specific changes
Again, a lot of platforms have changes in here: pxa, samsung, omap,
 at91, imx, ...
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIVAwUATwtZUmCrR//JCVInAQL93hAAzBbSkswA4SD09UXHPSLGpbWd7JYuax9T
 sR17FvnQCV+0T8c7ORRbjoBrCrxKkxuPMkFrfIHuTaP+beYe13CwTf2mV+dtnuv2
 hSjSjdgCq+yv+CvRZhRnmHqmEePN1dvRoC9Q/EVPEibJNJ4BjrTALMfkXbsTz861
 BOmcD7VGi0YfPhwRQ3D00MjohCflRoV2EmceHCUvH4HLEgpWcWl16UZeuWGn6BiA
 GJK37O2ubKz0hkExAH6NHEaRxeFsapjh8kkR8/dOoNh/iIlmmR5SRPOxMPWFD0ui
 lUeSc6QjMipHCzkfE7jUx6MICDZfRx+WRWVTwa/OTLJjJtY+zcRnUvoLl84XJqgX
 EG5YhyL+Os4Z0ci92uSK3rwYQ2AJz/r4dS6VWnAVVJHSc8zHCuioJL4KcF81llcz
 1dshlHkB1H1EeVrf08OM/1xX0X7SNzVJlQ801OZj31DYYtMqvrev72vn+tvJh6kL
 o9gZsOSl3cIlFi8cAK0WmZmwGHw4wfUDZb1ojN6GDctdrp/Vmwe3exHleWvfSDtN
 QBw4WyHl46JGw4bFVQ4hRH3vJZNuiso+ZNZvG3qGaEMfpNY5aMTy7lrxI/GFbFkA
 tEnhkDgjutEZ/B6nEF1h8cCrcLND7u4n209kJh6UR1Qx3a6xD/M/ycE4tisNuPE3
 wSSYuM1ZGTU=
 =vPhu
 -----END PGP SIGNATURE-----

Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Driver specific changes

Again, a lot of platforms have changes in here: pxa, samsung, omap,
at91, imx, ...

* tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits)
  ARM: sa1100: clean up of the clock support
  ARM: pxa: add dummy clock for sa1100-rtc
  RTC: sa1100: support sa1100, pxa and mmp soc families
  RTC: sa1100: remove redundant code of setting alarm
  RTC: sa1100: Clean out ost register
  Input: zylonite-wm97xx - replace IRQ_GPIO() with gpio_to_irq()
  pcmcia: pxa: replace IRQ_GPIO() with gpio_to_irq()
  ARM: EXYNOS: Modified files for SPI consolidation work
  ARM: S5P64X0: Enable SDHCI support
  ARM: S5P64X0: Add lookup of sdhci-s3c clocks using generic names
  ARM: S5P64X0: Add HSMMC setup for host Controller
  ARM: EXYNOS: Add USB OHCI support to ORIGEN board
  USB: Add Samsung Exynos OHCI diver
  ARM: EXYNOS: Add USB OHCI support to SMDKV310 board
  ARM: EXYNOS: Add USB OHCI device
  net: macb: fix build break with !CONFIG_OF
  i2c: tegra: Support DVC controller in device tree
  i2c: tegra: Add __devinit/exit to probe/remove
  net/at91_ether: use gpio_is_valid for phy IRQ line
  ARM: at91/net: add macb ethernet controller in 9g45/9g20 DT
  ...
2012-01-09 14:39:22 -08:00
Arnd Bergmann
dcf7ec5ee6 Merge branch 'samsung/driver' into next/drivers
Conflicts:
	arch/arm/mach-mxs/include/mach/common.h

Pull in previous samsung conflict merges and do a trivial
merge of an mxs double-add conflict.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-01-09 16:16:29 +00:00
Linus Torvalds
98793265b4 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (53 commits)
  Kconfig: acpi: Fix typo in comment.
  misc latin1 to utf8 conversions
  devres: Fix a typo in devm_kfree comment
  btrfs: free-space-cache.c: remove extra semicolon.
  fat: Spelling s/obsolate/obsolete/g
  SCSI, pmcraid: Fix spelling error in a pmcraid_err() call
  tools/power turbostat: update fields in manpage
  mac80211: drop spelling fix
  types.h: fix comment spelling for 'architectures'
  typo fixes: aera -> area, exntension -> extension
  devices.txt: Fix typo of 'VMware'.
  sis900: Fix enum typo 'sis900_rx_bufer_status'
  decompress_bunzip2: remove invalid vi modeline
  treewide: Fix comment and string typo 'bufer'
  hyper-v: Update MAINTAINERS
  treewide: Fix typos in various parts of the kernel, and fix some comments.
  clockevents: drop unknown Kconfig symbol GENERIC_CLOCKEVENTS_MIGR
  gpio: Kconfig: drop unknown symbol 'CS5535_GPIO'
  leds: Kconfig: Fix typo 'D2NET_V2'
  sound: Kconfig: drop unknown symbol ARCH_CLPS7500
  ...

Fix up trivial conflicts in arch/powerpc/platforms/40x/Kconfig (some new
kconfig additions, close to removed commented-out old ones)
2012-01-08 13:21:22 -08:00
Linus Torvalds
02550d61f4 devicetree/next changes queued for v3.3 merge window
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPBUxHAAoJEEFnBt12D9kBfB8QAIj/sGqC4WYpQBU9PyGiSAfq
 Xz5mBqAoILAjLD5SK1eR/N6+CHFt2scsyRkOubfg/4bn0I9Kr37oSXPcVqY24EKw
 zn2tEcDDJdCMzW/CFBEcOfcKfcNl1dgEXodhoOrSAeyaZeL24V5O1SvrwKGINQIp
 NPO/nHeEf7tRncscfeCFSK6h98dIhRZt+xpthIIZxYym5jd9vzRjk21dG6egcHOo
 RTfW2CwA0cu3h2EtR1DCCMwfL+Ze1na4iYcXcTT/5xEUjmkJrM/I44djb9blfWLR
 X0gPuj7q6t+eBKDZqnJufDbY79oOpQN8mgAeCrBwF5I27zAzn6FIRQ7Wobmv0DXr
 NrqsduI+nImAyVR1jeWBGAnowNPXfxd9YboATkph5LTpelQ1cZ/tikxVDteBtDSb
 voH68FKFmFZl3QlpFjJnIsodn57ETmUuezA4Xq+iJTHBMpLpcLCZ4RyAoiJRHca6
 lGwBArLo+wpuRdd/BB+rI+CV6ACbJqwb8Yd6ZTw5lW0eaMPTT93ffteChfEQPMq0
 mGVTYY6kVM9ReFPEkcxnQ3RyPF0XqP2TTp37gXC4/Y2LVMqg0UrrWxtwaU2har/Z
 bUF1JOKiZ6+CWJJwMw7coP7rBCPUz6FDApuDmQo9+I7MjxjFkzYzPtisUs9y7wjx
 /XA9z93mB/O+wcbuvqCo
 =CI17
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux-2.6

devicetree/next changes queued for v3.3 merge window

* tag 'devicetree-for-linus-20120104' of git://git.secretlab.ca/git/linux-2.6:
  ARM: prom.h: Fix build error by removing unneeded header file
  irq: check domain hwirq range for DT translate
  dt: add empty of_get_node/of_put_node functions
  of/pdt: fix section mismatch warning
  i2c-designware: add OF binding support
  dt/i2c: Enumerate some of the known trivial i2c devices
  dt: reform for_each_property to for_each_property_of_node
  ARM/of: allow *machine_desc.dt_compat to be const
  of/base: Take NULL string into account for property with multiple strings
  OF/device-tree: Add some entries to vendor-prefixes.txt

Fix up trivial add-add conflicts in include/linux/of.h
2012-01-07 12:18:52 -08:00
Greg Kroah-Hartman
ff4b8a57f0 Merge branch 'driver-core-next' into Linux 3.2
This resolves the conflict in the arch/arm/mach-s3c64xx/s3c6400.c file,
and it fixes the build error in the arch/x86/kernel/microcode_core.c
file, that the merge did not catch.

The microcode_core.c patch was provided by Stephen Rothwell
<sfr@canb.auug.org.au> who was invaluable in the merge issues involved
with the large sysdev removal process in the driver-core tree.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-06 11:42:52 -08:00
Al Viro
d36b691077 misc latin1 to utf8 conversions
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-01-02 13:04:55 +01:00
Rob Herring
af71100c7a i2c-designware: add OF binding support
Add of_match_table and DT style i2c registration to designware i2c
driver.

Refactored for pci/plat split by Dirk Brandewie.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>
2011-12-27 15:52:44 -06:00
Stephen Warren
68fb669554 i2c: tegra: Support DVC controller in device tree
One of the Tegra I2C blocks is inside the DVC (Digital Voltage Controller)
block. This block is identical to the rest of the I2C blocks, except that
it only supports master mode, it has registers moved around, and it needs
some extra init to get it into I2C mode.  The register moves are handled
by i2c_readl and i2c_writel

This patch adds a new compatible value for controllers of this "DVC"
type; I figured that this approach was reasonable, as opposed to adding
an is-dvc property under the existing compatible value, since the HW
truly is different.

v2: Call of_device_is_compatible() to determine is_dvc, instead of storing
the flag in tegra_i2c_of_match[]'s .data field.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-19 17:54:20 -08:00
Stephen Warren
92891da11a i2c: tegra: Add __devinit/exit to probe/remove
This fixes some section mismatch build warnings.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-19 17:54:20 -08:00