The `insn_write` handler for the AO subdevice (`labpc_ao_insn_write()`)
currently ignores `insn->n` (the number of samples to write) and assumes
a single sample is to be written. But `insn->n` could be 0, meaning no
samples should be written, in which case `data[0]` is invalid.
Follow the usual Comedi guidelines and change `labpc_ao_insn_write()` to
write the specified number of samples. This fixes the assumption that
`data[0]` is valid.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The `insn_write` handler for the AO subdevice
(`cb_pcidda_ao_insn_write()`) currently ignores `insn->n` (the number of
samples to write) and assumes a single sample is to be written. But
`insn->n` could be 0, meaning no samples should be written, in which
case `data[0]` is invalid.
Follow the usual Comedi guidelines and change
`cb_pcidda_ao_insn_write()` to write the specified number of samples.
This fixes the assumption that `data[0]` is valid.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The `insn_read` handler for the EEPROM subdevice
(`apci3501_eeprom_insn_read()`) currently ignores `insn->n` (the number
of samples to be read) and assumes a single sample is to be read. But
`insn->n` could be 0, meaning no samples should be read, in which case
`data[0]` ought not to be written. (The comedi core at least ensures
that `data[0]` exists, but we should not rely on that.)
Following the usual Comedi guidelines and interpret `insn->n` as the
number of samples to be read, but only read the EEPROM location once and
make `insn->n` copies, as we don't expect the contents of the EEPROM
location to change between readings.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The contents of the Comedi configuration instruction
`INSN_CONFIG_TIMER_1` instruction are not very well defined, but the one
driver that uses it (the "cb_pcidas64" driver for the PCI-DAS4020/12
card) assumes its `insn->n` is 5. Add a check in
`check_insn_config_length()` to verify that `insn->n` is correct for
this configuration instruction.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The `insn_read` handler for the EEPROM subdevice (`eeprom_insn_read()`)
currently ignores `insn->n` (the number of samples to be read) and
assumes a single sample is to be read. But `insn->n` could be 0,
meaning no samples should be read, in which case `data[0]` ought not to
be written. (The comedi core at least ensures that `data[0]` exists,
but we should not rely on that.)
Follow the usual Comedi guidelines and interpret `insn->n` as the number
of samples to be read, but only read the EEPROM location once and make
`insn->n` copies, as we don't expect the contents of the EEPROM location
to change between readings.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The `insn_write` handler for the AO subdevice (`ao_winsn()` currently
ignores `insn->n` (the number of samples to write) and assumes a single
sample is to be written. But `insn->n` could be 0, meaning no samples
should be written, in which case `data[0]` is invalid.
Follow the usual Comedi guidelines and change `ao_winsn()` to write the
specified number of samples. This fixes the assumption that `data[0]`
is valid.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use DRM_FB_HELPER_DEFAULT_OPS rather then open-coding it.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is a leftover from when the driver was out of tree and also build
against older kernels.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add #ifdef CONFIG_PM_SLEEP around the suspend/hibernate functions.
Remove unnecessary #ifdef CONFIG_COMPAT, the .compat_ioctl member is
always available and if CONFIG_COMPAT is not set then drm_compat_ioctl
is defined to NULL.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use PCI_DEVICE() for our pci_id table and also simplify the terminating
entry tio just "{ }".
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stop adding -Iinclude/drm to the CFLAGS and stop using the obsolete
"include-all" drm/drmP.h header.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cleanup a line over 80 characters in rtw_hal_xmit() by using
if(x) instead of if(x == true). Also clears a missing spaces
around '|' checkpatch issue.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function rtw_hal_xmit() returns true or false.
Change the return type from s32 to bool.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function rtl8188eu_xmitframe_complete() returns true or false.
Change the return type from s32 to bool.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The field enable of struct recv_reorder_ctrl is only used for boolean
values, so change the type from u8 to bool.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The field accept_addba_req of struct mlme_ext_info has type bool.
Use the value of accept_addba_req directly instead of the ternary
operator in an asignment.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The variable is_cck_rate is used for boolean values, so change the
type from u8 to bool. The initializations to zero and use of ternary
operator in the assignments are unnecessary, remove them as well.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use clamp() to simplify code in odm_evm_db_to_percentage().
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The following tasks were completed or not the right solution:
1/2- Not the proper solution, we should register a platform device in
vchiq the same way it's done with bcm2835-camera as commented here:
https://lkml.org/lkml/2018/10/16/1131
2/3- Fixed by Takashi Iwai here: https://lkml.org/lkml/2018/9/4/587
Also, adds a new task as per mailing list conversation.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It was called bcm2835_alsa0_driver, that "0" didn't mean much.
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There will only be one probe function, there is no use for appendig
"_dt" the end of the name.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In this case explicitly naming the union doesn't help overall code
comprehension and clutters it.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When it comes to declaring variables it's preferred, when possible, to
use an inverted tree organization scheme.
Also, removes some comments that were useless.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The memory is being allocated with devres_alloc(), wich ultimately uses
__GFP_ZERO to call kmalloc. We don't need to zero the memory area again
in bcm2835-audio.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The device communicates with the audio core using FOURCC codes. The
driver was generating them using different macros/expressions. We now
use the same macro to create them and centralize all the definitions.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes two line ending with parenthesis, which did
not conform to the linux kernel coding style.
Signed-off-by: Cristian Sicilia <sicilia.cristian@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add spaces around '+' to correct the following checkpath.pl warnings:
WARNING: line over 80 characters
+ write_dpPort(accel, *(unsigned int *)(pSrcbuf + (j * 4)));
WARNING: line over 80 characters
+ memcpy(ajRemain, pSrcbuf+ul4BytesPerScan, ulBytesRemain);
Signed-off-by: Laís Pessine do Carmo <laispc19@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename struct _rt_firmare_seg_container to _fw_seg_container to match
the typedef name of this structure. Also removes the spelling mistake
of 'firmare'.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Trivial fix to clean up indentation issues across the driver
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Trivial fix to clean up an indentation issue
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename fields in fw_priv struct from CamelCase to snake_case.
Reported by checkpatch.
Signed-off-by: Robert Eshleman <bobbyeshleman@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Trivial fix to common spelling mistakes in some rtl* drivers
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cleanup extra line found by checkpatch.pl
Signed-off-by: Jeeeun Evans <jeeeunevans@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Correct the following warning from checkpatch.pl:
WARNING: Missing a blank line after declarations
+ struct msdc_host *host = mmc_priv(mmc);
+ msdc_pm(state, (void *)host);
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@protonmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Userspace mode-setting (and thus also VESA) is not supported together with
modesetting. KMS userspace apps not properly marking the framebuffer as
dirty are also not supported.
So stop trying to accommodate this and simply enable accel
once at driver init.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All the files contain a MIT license header, replace this with:
SPDX-License-Identifier: MIT
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some comments where still using docbook style comments, move these
either over to kerneldoc, or just make them regular comments.
Also remove a bunch of obsolete comments.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Switch to the more complete vbox_err.h file from include/linux which got
added with the merging of the vboxguest driver.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On DPMS off we get a call to vbx_crtc_atomic_disable, followed by
a call to vbox_primary_atomic_update, at which point crtc_state->enable
is 0 and crtc_state->mode has been zero-ed. On a 0 width/height
vbox_do_modeset() falls back to 640x480, so this causes the guest Window
(its "monitor") to resize to 640x480 (and become black).
This commit makes us not look at crtc_state->mode when crtc_state->enable
is not set, so that we keep the old mode and just make the window go black.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Atomic modesetting drivers should never check crtc_state->active directly,
instead check crtc_state->enable.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add missing SPDX License Identifier to the source and header files.
Reported by checkpatch.
Signed-off-by: Ioannis Valasakis <code@wizofe.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the mail address from the copyright notice as it may change in
the future. Reported by checkpatch.
Signed-off-by: Ioannis Valasakis <code@wizofe.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace the bit assignment with the preferred BIT macro. Reported by
checkpatch.
Signed-off-by: Ioannis Valasakis <code@wizofe.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
