worker destruction includes these parts of code:
adjust pool's stats
remove the worker from idle list
detach the worker from the pool
kthread_stop() to wait for the worker's task exit
free the worker struct
We can find out that there is no essential work to do after
kthread_stop(), which means destroy_worker() doesn't need to wait for
the worker's task exit, so we can remove kthread_stop() and free the
worker struct in the worker exiting path.
However, put_unbound_pool() still needs to sync the all the workers'
destruction before destroying the pool; otherwise, the workers may
access to the invalid pool when they are exiting.
So we also move the code of "detach the worker" to the exiting
path and let put_unbound_pool() to sync with this code via
detach_completion.
The code of "detach the worker" is wrapped in a new function
"worker_detach_from_pool()" although worker_detach_from_pool() is only
called once (in worker_thread()) after this patch, but we need to wrap
it for these reasons:
1) The code of "detach the worker" is not short enough to unfold them
in worker_thread().
2) the name of "worker_detach_from_pool()" is self-comment, and we add
some comments above the function.
3) it will be shared by rescuer in later patch which allows rescuer
and normal thread use the same attach/detach frameworks.
The worker id is freed when detaching which happens before the worker
is fully dead, but this id of the dying worker may be re-used for a
new worker, so the dying worker's task name is changed to
"worker/dying" to avoid two or several workers having the same name.
Since "detach the worker" is moved out from destroy_worker(),
destroy_worker() doesn't require manager_mutex, so the
"lockdep_assert_held(&pool->manager_mutex)" in destroy_worker() is
removed, and destroy_worker() is not protected by manager_mutex in
put_unbound_pool().
tj: Minor description updates.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
We used to have the CPU online failure path where a worker is created
and then destroyed without being started. A worker was created for
the CPU coming online and if the online operation failed the created worker
was shut down without being started. But this behavior was changed.
The first worker is created and started at the same time for the CPU coming
online.
It means that we had already ensured in the code that destroy_worker()
destroys only idle workers and we don't want to allow it to destroy
any non-idle worker in the future. Otherwise, it may be buggy and it
may be extremely hard to check. We should force destroy_worker() to
destroy only idle workers explicitly.
Since destroy_worker() destroys only idle workers, this patch does not
change any functionality. We just need to update the comments and the
sanity check code.
In the sanity check code, we will refuse to destroy the worker
if !(worker->flags & WORKER_IDLE).
If the worker entered idle which means it is already started,
so we remove the check of "worker->flags & WORKER_STARTED",
after this removal, WORKER_STARTED is totally unneeded,
so we remove WORKER_STARTED too.
In the comments for create_worker(), "Create a new worker which is bound..."
is changed to "... which is attached..." due to we change the name of this
behavior to attaching.
tj: Minor description / comment updates.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
worker_idr is highly bound to managers and is always/only accessed in manager
lock context. So we don't need pool->lock for it.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
tj: Refreshed on top of wq/for-3.16.
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Tejun Heo <tj@kernel.org>
wq_update_unbound_numa(), when it's decided that the newly updated
cpumask equals the default, looks at whether the current pwq is
already the default one and skips setting pwq to the default one.
This extra step is unnecessary and we can always jump to use_dfl_pwq
instead. Simplify the code by removing the conditional.
This doesn't make any functional difference.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
There is a race condition between rescuer_thread() and
pwq_unbound_release_workfn().
Even after a pwq is scheduled for rescue, the associated work items
may be consumed by any worker. If all of them are consumed before the
rescuer gets to them and the pwq's base ref was put due to attribute
change, the pwq may be released while still being linked on
@wq->maydays list making the rescuer dereference already freed pwq
later.
Make send_mayday() pin the target pwq until the rescuer is done with
it.
tj: Updated comment and patch description.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org # v3.10+
After a @pwq is scheduled for emergency execution, other workers may
consume the affectd work items before the rescuer gets to them. This
means that a workqueue many have pwqs queued on @wq->maydays list
while not having any work item pending or in-flight. If
destroy_workqueue() executes in such condition, the rescuer may exit
without emptying @wq->maydays.
This currently doesn't cause any actual harm. destroy_workqueue() can
safely destroy all the involved data structures whether @wq->maydays
is populated or not as nobody access the list once the rescuer exits.
However, this is nasty and makes future development difficult. Let's
update rescuer_thread() so that it empties @wq->maydays after seeing
should_stop to guarantee that the list is empty on rescuer exit.
tj: Updated comment and patch description.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org # v3.10+
wq_update_unbound_numa() failure path has the following two bugs.
- alloc_unbound_pwq() is called without holding wq->mutex; however, if
the allocation fails, it jumps to out_unlock which tries to unlock
wq->mutex.
- The function should switch to dfl_pwq on failure but didn't do so
after alloc_unbound_pwq() failure.
Fix it by regrabbing wq->mutex and jumping to use_dfl_pwq on
alloc_unbound_pwq() failure.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Acked-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 4c16bd327c ("workqueue: implement NUMA affinity for unbound workqueues")
Pull timer changes from Thomas Gleixner:
"This assorted collection provides:
- A new timer based timer broadcast feature for systems which do not
provide a global accessible timer device. That allows those
systems to put CPUs into deep idle states where the per cpu timer
device stops.
- A few NOHZ_FULL related improvements to the timer wheel
- The usual updates to timer devices found in ARM SoCs
- Small improvements and updates all over the place"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits)
tick: Remove code duplication in tick_handle_periodic()
tick: Fix spelling mistake in tick_handle_periodic()
x86: hpet: Use proper destructor for delayed work
workqueue: Provide destroy_delayed_work_on_stack()
clocksource: CMT, MTU2, TMU and STI should depend on GENERIC_CLOCKEVENTS
timer: Remove code redundancy while calling get_nohz_timer_target()
hrtimer: Rearrange comments in the order struct members are declared
timer: Use variable head instead of &work_list in __run_timers()
clocksource: exynos_mct: silence a static checker warning
arm: zynq: Add support for cpufreq
arm: zynq: Don't use arm_global_timer with cpufreq
clocksource/cadence_ttc: Overhaul clocksource frequency adjustment
clocksource/cadence_ttc: Call clockevents_update_freq() with IRQs enabled
clocksource: Add Kconfig entries for CMT, MTU2, TMU and STI
sh: Remove Kconfig entries for TMU, CMT and MTU2
ARM: shmobile: Remove CMT, TMU and STI Kconfig entries
clocksource: armada-370-xp: Use atomic access for shared registers
clocksource: orion: Use atomic access for shared registers
clocksource: timer-keystone: Delete unnecessary variable
clocksource: timer-keystone: introduce clocksource driver for Keystone
...
If a delayed or deferrable work is on stack we need to tell debug
objects that we are destroying the timer and the work. Otherwise we
leak the tracking object.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Acked-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20140323141939.911487677@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
When a kworker should die, the kworkre is notified through WORKER_DIE
flag instead of kthread_should_stop(). This, IIRC, is primarily to
keep the test synchronized inside worker_pool lock. WORKER_DIE is
first set while holding pool->lock, the lock is dropped and
kthread_stop() is called.
Unfortunately, this means that there's a slight chance that the target
kworker may see WORKER_DIE before kthread_stop() finishes and exits
and frees the target task before or during kthread_stop().
Fix it by pinning the target task before setting WORKER_DIE and
putting it after kthread_stop() is done.
tj: Improved patch description and comment. Moved pinning above
WORKER_DIE for better signify what it's protecting.
CC: stable@vger.kernel.org
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Pull workqueue update from Tejun Heo:
"Just one patch to add destroy_work_on_stack() annotations to help
debugobj debugging"
* 'for-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Calling destroy_work_on_stack() to pair with INIT_WORK_ONSTACK()
In case CONFIG_DEBUG_OBJECTS_WORK is defined, it is needed to
call destroy_work_on_stack() which frees the debug object to pair
with INIT_WORK_ONSTACK().
Signed-off-by: Liu, Chuansheng <chuansheng.liu@intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
This reverts commit c2fda50966.
c2fda50966 removed lockdep annotation from work_on_cpu() to work around
the PCI path that calls work_on_cpu() from within a work_on_cpu() work item
(PF driver .probe() method -> pci_enable_sriov() -> add VFs -> VF driver
.probe method).
961da7fb6b22 ("PCI: Avoid unnecessary CPU switch when calling driver
.probe() method) avoids that recursive work_on_cpu() use in a different
way, so this revert restores the work_on_cpu() lockdep annotation.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Tejun Heo <tj@kernel.org>
When one work starts execution, the high bits of work's data contain
pool ID. It can represent a maximum of WORK_OFFQ_POOL_NONE. Pool ID
is assigned WORK_OFFQ_POOL_NONE when the work being initialized
indicating that no pool is associated and get_work_pool() uses it to
check the associated pool. So if worker_pool_assign_id() assigns a
ID greater than or equal WORK_OFFQ_POOL_NONE to a pool, it triggers
leakage, and it may break the non-reentrance guarantee.
This patch fix this issue by modifying the worker_pool_assign_id()
function calling idr_alloc() by setting @end param WORK_OFFQ_POOL_NONE.
Furthermore, in the current implementation, the BUILD_BUG_ON() in
init_workqueues makes no sense. The number of worker pools needed
cannot be determined at compile time, because the number of backing
pools for UNBOUND workqueues is dynamic based on the assigned custom
attributes. So remove it.
tj: Minor comment and indentation updates.
Signed-off-by: Li Bin <huawei.libin@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
An ordered workqueue implements execution ordering by using single
pool_workqueue with max_active == 1. On a given pool_workqueue, work
items are processed in FIFO order and limiting max_active to 1
enforces the queued work items to be processed one by one.
Unfortunately, 4c16bd327c ("workqueue: implement NUMA affinity for
unbound workqueues") accidentally broke this guarantee by applying
NUMA affinity to ordered workqueues too. On NUMA setups, an ordered
workqueue would end up with separate pool_workqueues for different
nodes. Each pool_workqueue still limits max_active to 1 but multiple
work items may be executed concurrently and out of order depending on
which node they are queued to.
Fix it by using dedicated ordered_wq_attrs[] when creating ordered
workqueues. The new attrs match the unbound ones except that no_numa
is always set thus forcing all NUMA nodes to share the default
pool_workqueue.
While at it, add sanity check in workqueue creation path which
verifies that an ordered workqueues has only the default
pool_workqueue.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Libin <huawei.libin@huawei.com>
Cc: stable@vger.kernel.org
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Move the setting of PF_NO_SETAFFINITY up before set_cpus_allowed()
in create_worker(). Otherwise userland can change ->cpus_allowed
in between.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Pull trivial tree from Jiri Kosina:
"The usual trivial updates all over the tree -- mostly typo fixes and
documentation updates"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (52 commits)
doc: Documentation/cputopology.txt fix typo
treewide: Convert retrun typos to return
Fix comment typo for init_cma_reserved_pageblock
Documentation/trace: Correcting and extending tracepoint documentation
mm/hotplug: fix a typo in Documentation/memory-hotplug.txt
power: Documentation: Update s2ram link
doc: fix a typo in Documentation/00-INDEX
Documentation/printk-formats.txt: No casts needed for u64/s64
doc: Fix typo "is is" in Documentations
treewide: Fix printks with 0x%#
zram: doc fixes
Documentation/kmemcheck: update kmemcheck documentation
doc: documentation/hwspinlock.txt fix typo
PM / Hibernate: add section for resume options
doc: filesystems : Fix typo in Documentations/filesystems
scsi/megaraid fixed several typos in comments
ppc: init_32: Fix error typo "CONFIG_START_KERNEL"
treewide: Add __GFP_NOWARN to k.alloc calls with v.alloc fallbacks
page_isolation: Fix a comment typo in test_pages_isolated()
doc: fix a typo about irq affinity
...
Pull workqueue updates from Tejun Heo:
"Nothing interesting. All are doc / comment updates"
* 'for-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Correct/Drop references to gcwq in Documentation
workqueue: Fix manage_workers() RETURNS description
workqueue: Comment correction in file header
workqueue: mark WQ_NON_REENTRANT deprecated
Here's the big driver core pull request for 3.12-rc1.
Lots of tiny changes here fixing up the way sysfs attributes are
created, to try to make drivers simpler, and fix a whole class race
conditions with creations of device attributes after the device was
announced to userspace.
All the various pieces are acked by the different subsystem maintainers.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.21 (GNU/Linux)
iEYEABECAAYFAlIlIPcACgkQMUfUDdst+ynUMwCaAnITsxyDXYQ4DqEsz8EcOtMk
718AoLrgnUZs3B+70AT34DVktg4HSThk
=USl9
-----END PGP SIGNATURE-----
Merge tag 'driver-core-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core patches from Greg KH:
"Here's the big driver core pull request for 3.12-rc1.
Lots of tiny changes here fixing up the way sysfs attributes are
created, to try to make drivers simpler, and fix a whole class race
conditions with creations of device attributes after the device was
announced to userspace.
All the various pieces are acked by the different subsystem
maintainers"
* tag 'driver-core-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (119 commits)
firmware loader: fix pending_fw_head list corruption
drivers/base/memory.c: introduce help macro to_memory_block
dynamic debug: line queries failing due to uninitialized local variable
sysfs: sysfs_create_groups returns a value.
debugfs: provide debugfs_create_x64() when disabled
rbd: convert bus code to use bus_groups
firmware: dcdbas: use binary attribute groups
sysfs: add sysfs_create/remove_groups for when SYSFS is not enabled
driver core: add #include <linux/sysfs.h> to core files.
HID: convert bus code to use dev_groups
Input: serio: convert bus code to use drv_groups
Input: gameport: convert bus code to use drv_groups
driver core: firmware: use __ATTR_RW()
driver core: core: use DEVICE_ATTR_RO
driver core: bus: use DRIVER_ATTR_WO()
driver core: create write-only attribute macros for devices and drivers
sysfs: create __ATTR_WO()
driver-core: platform: convert bus code to use dev_groups
workqueue: convert bus code to use dev_groups
MEI: convert bus code to use dev_groups
...
If !PREEMPT, a kworker running work items back to back can hog CPU.
This becomes dangerous when a self-requeueing work item which is
waiting for something to happen races against stop_machine. Such
self-requeueing work item would requeue itself indefinitely hogging
the kworker and CPU it's running on while stop_machine would wait for
that CPU to enter stop_machine while preventing anything else from
happening on all other CPUs. The two would deadlock.
Jamie Liu reports that this deadlock scenario exists around
scsi_requeue_run_queue() and libata port multiplier support, where one
port may exclude command processing from other ports. With the right
timing, scsi_requeue_run_queue() can end up requeueing itself trying
to execute an IO which is asked to be retried while another device has
an exclusive access, which in turn can't make forward progress due to
stop_machine.
Fix it by invoking cond_resched() after executing each work item.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Jamie Liu <jamieliu@google.com>
References: http://thread.gmane.org/gmane.linux.kernel/1552567
Cc: stable@vger.kernel.org
--
kernel/workqueue.c | 9 +++++++++
1 file changed, 9 insertions(+)
The dev_attrs field of struct bus_type is going away soon, dev_groups
should be used instead. This converts the workqueue bus code to use
the correct field.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No functional change. The comment of function manage_workers()
RETURNS description is obvious wrong, same as the CONTEXT.
Fix it.
Signed-off-by: Libin <huawei.libin@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
No functional change. There are two worker pools for each cpu in
current implementation (one for normal work items and the other for
high priority ones).
tj: Whitespace adjustments.
Signed-off-by: Libin <huawei.libin@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
When building the htmldocs (in verbose mode), scripts/kernel-doc reports the
following type of warnings:
Warning(kernel/workqueue.c:653): No description found for return value of
'get_work_pool'
Fix them by:
- Using "Return:" sections to introduce descriptions of return values
- Adding some missing descriptions
Signed-off-by: Yacine Belkadi <yacine.belkadi.1@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pull two workqueue fixes from Tejun Heo:
"A lockdep notation update so that nested work_on_cpu() invocations
don't lead to spurious lockdep warnings and fix for an unbound attr
bug which made what's shown in sysfs deviate from the actual ones.
Both patches have pretty limited scope"
* 'for-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: copy workqueue_attrs with all fields
workqueue: allow work_on_cpu() to be called recursively
$echo '0' > /sys/bus/workqueue/devices/xxx/numa
$cat /sys/bus/workqueue/devices/xxx/numa
I got 1. It should be 0, the reason is copy_workqueue_attrs() called
in apply_workqueue_attrs() doesn't copy no_numa field.
Fix it by making copy_workqueue_attrs() copy ->no_numa too. This
would also make get_unbound_pool() set a pool's ->no_numa attribute
according to the workqueue attributes used when the pool was created.
While harmelss, as ->no_numa isn't a pool attribute, this is a bit
confusing. Clear it explicitly.
tj: Updated description and comments a bit.
Signed-off-by: Shaohua Li <shli@fusionio.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
If the @fn call work_on_cpu() again, the lockdep will complain:
> [ INFO: possible recursive locking detected ]
> 3.11.0-rc1-lockdep-fix-a #6 Not tainted
> ---------------------------------------------
> kworker/0:1/142 is trying to acquire lock:
> ((&wfc.work)){+.+.+.}, at: [<ffffffff81077100>] flush_work+0x0/0xb0
>
> but task is already holding lock:
> ((&wfc.work)){+.+.+.}, at: [<ffffffff81075dd9>] process_one_work+0x169/0x610
>
> other info that might help us debug this:
> Possible unsafe locking scenario:
>
> CPU0
> ----
> lock((&wfc.work));
> lock((&wfc.work));
>
> *** DEADLOCK ***
It is false-positive lockdep report. In this sutiation,
the two "wfc"s of the two work_on_cpu() are different,
they are both on stack. flush_work() can't be deadlock.
To fix this, we need to avoid the lockdep checking in this case,
thus we instroduce a internal __flush_work() which skip the lockdep.
tj: Minor comment adjustment.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Reported-by: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com>
Reported-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications. For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.
After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out. Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.
This removes all the uses of the __cpuinit macros from C files in
the core kernel directories (kernel, init, lib, mm, and include)
that don't really have a specific maintainer.
[1] https://lkml.org/lkml/2013/5/20/589
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Pull workqueue changes from Tejun Heo:
"Surprisingly, Lai and I didn't break too many things implementing
custom pools and stuff last time around and there aren't any follow-up
changes necessary at this point.
The only change in this pull request is Viresh's patches to make some
per-cpu workqueues to behave as unbound workqueues dependent on a boot
param whose default can be configured via a config option. This leads
to higher processing overhead / lower bandwidth as more work items are
bounced across CPUs; however, it can lead to noticeable powersave in
certain configurations - ~10% w/ idlish constant workload on a
big.LITTLE configuration according to Viresh.
This is because per-cpu workqueues interfere with how the scheduler
perceives whether or not each CPU is idle by forcing pinned tasks on
them, which makes the scheduler's power-aware scheduling decisions
less effective.
Its effectiveness is likely less pronounced on homogenous
configurations and this type of optimization can probably be made
automatic; however, the changes are pretty minimal and the affected
workqueues are clearly marked, so it's an easy gain for some
configurations for the time being with pretty unintrusive changes."
* 'for-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
fbcon: queue work on power efficient wq
block: queue work on power efficient wq
PHYLIB: queue work on system_power_efficient_wq
workqueue: Add system wide power_efficient workqueues
workqueues: Introduce new flag WQ_POWER_EFFICIENT for power oriented workqueues
Commit 8425e3d5bd ("workqueue: inline trivial wrappers") changed
schedule_work() and schedule_delayed_work() to inline wrappers,
but these rely on some symbols that are EXPORT_SYMBOL_GPL, while
the original functions were EXPORT_SYMBOL. This has the effect of
changing the licensing requirement for these functions and making
them unavailable to non GPL modules.
Make them available again by removing the restriction on the
required symbols.
Signed-off-by: Marc Dionne <marc.dionne@your-file-system.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
When we fail to mutex_trylock(), we release the pool spin_lock and do
mutex_lock(). After that, we should regrab the pool spin_lock, but,
regrabbing is missed in current code. So correct it.
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
This patch adds system wide workqueues aligned towards power saving. This is
done by allocating them with WQ_UNBOUND flag if 'wq_power_efficient' is set to
'true'.
tj: updated comments a bit.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Workqueues can be performance or power-oriented. Currently, most workqueues are
bound to the CPU they were created on. This gives good performance (due to cache
effects) at the cost of potentially waking up otherwise idle cores (Idle from
scheduler's perspective. Which may or may not be physically idle) just to
process some work. To save power, we can allow the work to be rescheduled on a
core that is already awake.
Workqueues created with the WQ_UNBOUND flag will allow some power savings.
However, we don't change the default behaviour of the system. To enable
power-saving behaviour, a new config option CONFIG_WQ_POWER_EFFICIENT needs to
be turned on. This option can also be overridden by the
workqueue.power_efficient boot parameter.
tj: Updated config description and comments. Renamed
CONFIG_WQ_POWER_EFFICIENT to CONFIG_WQ_POWER_EFFICIENT_DEFAULT.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
One of the problems that arise when converting dedicated custom
threadpool to workqueue is that the shared worker pool used by workqueue
anonimizes each worker making it more difficult to identify what the
worker was doing on which target from the output of sysrq-t or debug
dump from oops, BUG() and friends.
This patch implements set_worker_desc() which can be called from any
workqueue work function to set its description. When the worker task is
dumped for whatever reason - sysrq-t, WARN, BUG, oops, lockdep assertion
and so on - the description will be printed out together with the
workqueue name and the worker function pointer.
The printing side is implemented by print_worker_info() which is called
from functions in task dump paths - sched_show_task() and
dump_stack_print_info(). print_worker_info() can be safely called on
any task in any state as long as the task struct itself is accessible.
It uses probe_*() functions to access worker fields. It may print
garbage if something went very wrong, but it wouldn't cause (another)
oops.
The description is currently limited to 24bytes including the
terminating \0. worker->desc_valid and workder->desc[] are added and
the 64 bytes marker which was already incorrect before adding the new
fields is moved to the correct position.
Here's an example dump with writeback updated to set the bdi name as
worker desc.
Hardware name: Bochs
Modules linked in:
Pid: 7, comm: kworker/u9:0 Not tainted 3.9.0-rc1-work+ #1
Workqueue: writeback bdi_writeback_workfn (flush-8:0)
ffffffff820a3ab0 ffff88000f6e9cb8 ffffffff81c61845 ffff88000f6e9cf8
ffffffff8108f50f 0000000000000000 0000000000000000 ffff88000cde16b0
ffff88000cde1aa8 ffff88001ee19240 ffff88000f6e9fd8 ffff88000f6e9d08
Call Trace:
[<ffffffff81c61845>] dump_stack+0x19/0x1b
[<ffffffff8108f50f>] warn_slowpath_common+0x7f/0xc0
[<ffffffff8108f56a>] warn_slowpath_null+0x1a/0x20
[<ffffffff81200150>] bdi_writeback_workfn+0x2a0/0x3b0
...
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Acked-by: Jan Kara <jack@suse.cz>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
memory allocated by kmem_cache_alloc() should be freed using
kmem_cache_free(), not kfree().
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Tejun Heo <tj@kernel.org>
destroy_workqueue() performs several sanity checks before proceeding
with destruction of a workqueue. One of the checks verifies that
refcnt of each pwq (pool_workqueue) is over 1 as at that point there
should be no in-flight work items and the only holder of pwq refs is
the workqueue itself.
This worked fine as a workqueue used to hold only one reference to its
pwqs; however, since 4c16bd327c ("workqueue: implement NUMA affinity
for unbound workqueues"), a workqueue may hold multiple references to
its default pwq triggering this sanity check spuriously.
Fix it by not triggering the pwq->refcnt assertion on default pwqs.
An example spurious WARN trigger follows.
WARNING: at kernel/workqueue.c:4201 destroy_workqueue+0x6a/0x13e()
Hardware name: 4286C12
Modules linked in: sdhci_pci sdhci mmc_core usb_storage i915 drm_kms_helper drm i2c_algo_bit i2c_core video
Pid: 361, comm: umount Not tainted 3.9.0-rc5+ #29
Call Trace:
[<c04314a7>] warn_slowpath_common+0x7c/0x93
[<c04314e0>] warn_slowpath_null+0x22/0x24
[<c044796a>] destroy_workqueue+0x6a/0x13e
[<c056dc01>] ext4_put_super+0x43/0x2c4
[<c04fb7b8>] generic_shutdown_super+0x4b/0xb9
[<c04fb848>] kill_block_super+0x22/0x60
[<c04fb960>] deactivate_locked_super+0x2f/0x56
[<c04fc41b>] deactivate_super+0x2e/0x31
[<c050f1e6>] mntput_no_expire+0x103/0x108
[<c050fdce>] sys_umount+0x2a2/0x2c4
[<c050fe0e>] sys_oldumount+0x1e/0x20
[<c085ba4d>] sysenter_do_call+0x12/0x38
tj: Rewrote description.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iQEcBAABAgAGBQJRWLTrAAoJEHm+PkMAQRiGe8oH/iMy48mecVWvxVZn74Tx3Cef
xmW/PnAIj28EhSPqK49N/Ow6AfQToFKf7AP0ge20KAf5teTq95AY+tH74DAANt8F
BjKXXTZiR5xwBvRkq7CR5wDcCvEcBAAz8fgTEd6SEDB2d2VXFf5eKdKUqt1avTCh
Z6Hup5kuwX+ddtwY2DCBXtp2n6fL0Rm5yLzY1A3OOBye1E7VyLTF7M5BR603Q44P
4kRLxn8+R7jy3hTuZIhAeoS8TKUoBwVk7DmKxEzrhTHZVOmvwE9lEHybRnIyOpd/
k1JnbRbiPsLsCVFOn10SQkGDAIk00lro3tuWP2C1ljERiD/OOh5Ui9nXYAhMkbI=
=q15K
-----END PGP SIGNATURE-----
Merge tag 'v3.9-rc5' into wq/for-3.10
Writeback conversion to workqueue will be based on top of wq/for-3.10
branch to take advantage of custom attrs and NUMA support for unbound
workqueues. Mainline currently contains two commits which result in
non-trivial merge conflicts with wq/for-3.10 and because
block/for-3.10/core is based on v3.9-rc3 which contains one of the
conflicting commits, we need a pre-merge-window merge anyway. Let's
pull v3.9-rc5 into wq/for-3.10 so that the block tree doesn't suffer
from workqueue merge conflicts.
The two conflicts and their resolutions:
* e68035fb65 ("workqueue: convert to idr_alloc()") in mainline changes
worker_pool_assign_id() to use idr_alloc() instead of the old idr
interface. worker_pool_assign_id() goes through multiple locking
changes in wq/for-3.10 causing the following conflict.
static int worker_pool_assign_id(struct worker_pool *pool)
{
int ret;
<<<<<<< HEAD
lockdep_assert_held(&wq_pool_mutex);
do {
if (!idr_pre_get(&worker_pool_idr, GFP_KERNEL))
return -ENOMEM;
ret = idr_get_new(&worker_pool_idr, pool, &pool->id);
} while (ret == -EAGAIN);
=======
mutex_lock(&worker_pool_idr_mutex);
ret = idr_alloc(&worker_pool_idr, pool, 0, 0, GFP_KERNEL);
if (ret >= 0)
pool->id = ret;
mutex_unlock(&worker_pool_idr_mutex);
>>>>>>> c67bf5361e
return ret < 0 ? ret : 0;
}
We want locking from the former and idr_alloc() usage from the
latter, which can be combined to the following.
static int worker_pool_assign_id(struct worker_pool *pool)
{
int ret;
lockdep_assert_held(&wq_pool_mutex);
ret = idr_alloc(&worker_pool_idr, pool, 0, 0, GFP_KERNEL);
if (ret >= 0) {
pool->id = ret;
return 0;
}
return ret;
}
* eb2834285c ("workqueue: fix possible pool stall bug in
wq_unbind_fn()") updated wq_unbind_fn() such that it has single
larger for_each_std_worker_pool() loop instead of two separate loops
with a schedule() call inbetween. wq/for-3.10 renamed
pool->assoc_mutex to pool->manager_mutex causing the following
conflict (earlier function body and comments omitted for brevity).
static void wq_unbind_fn(struct work_struct *work)
{
...
spin_unlock_irq(&pool->lock);
<<<<<<< HEAD
mutex_unlock(&pool->manager_mutex);
}
=======
mutex_unlock(&pool->assoc_mutex);
>>>>>>> c67bf5361e
schedule();
<<<<<<< HEAD
for_each_cpu_worker_pool(pool, cpu)
=======
>>>>>>> c67bf5361e
atomic_set(&pool->nr_running, 0);
spin_lock_irq(&pool->lock);
wake_up_worker(pool);
spin_unlock_irq(&pool->lock);
}
}
The resolution is mostly trivial. We want the control flow of the
latter with the rename of the former.
static void wq_unbind_fn(struct work_struct *work)
{
...
spin_unlock_irq(&pool->lock);
mutex_unlock(&pool->manager_mutex);
schedule();
atomic_set(&pool->nr_running, 0);
spin_lock_irq(&pool->lock);
wake_up_worker(pool);
spin_unlock_irq(&pool->lock);
}
}
Signed-off-by: Tejun Heo <tj@kernel.org>
Unbound workqueues are now NUMA aware. Let's add some control knobs
and update sysfs interface accordingly.
* Add kernel param workqueue.numa_disable which disables NUMA affinity
globally.
* Replace sysfs file "pool_id" with "pool_ids" which contain
node:pool_id pairs. This change is userland-visible but "pool_id"
hasn't seen a release yet, so this is okay.
* Add a new sysf files "numa" which can toggle NUMA affinity on
individual workqueues. This is implemented as attrs->no_numa whichn
is special in that it isn't part of a pool's attributes. It only
affects how apply_workqueue_attrs() picks which pools to use.
After "pool_ids" change, first_pwq() doesn't have any user left.
Removed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Currently, an unbound workqueue has single current, or first, pwq
(pool_workqueue) to which all new work items are queued. This often
isn't optimal on NUMA machines as workers may jump around across node
boundaries and work items get assigned to workers without any regard
to NUMA affinity.
This patch implements NUMA affinity for unbound workqueues. Instead
of mapping all entries of numa_pwq_tbl[] to the same pwq,
apply_workqueue_attrs() now creates a separate pwq covering the
intersecting CPUs for each NUMA node which has online CPUs in
@attrs->cpumask. Nodes which don't have intersecting possible CPUs
are mapped to pwqs covering whole @attrs->cpumask.
As CPUs come up and go down, the pool association is changed
accordingly. Changing pool association may involve allocating new
pools which may fail. To avoid failing CPU_DOWN, each workqueue
always keeps a default pwq which covers whole attrs->cpumask which is
used as fallback if pool creation fails during a CPU hotplug
operation.
This ensures that all work items issued on a NUMA node is executed on
the same node as long as the workqueue allows execution on the CPUs of
the node.
As this maps a workqueue to multiple pwqs and max_active is per-pwq,
this change the behavior of max_active. The limit is now per NUMA
node instead of global. While this is an actual change, max_active is
already per-cpu for per-cpu workqueues and primarily used as safety
mechanism rather than for active concurrency control. Concurrency is
usually limited from workqueue users by the number of concurrently
active work items and this change shouldn't matter much.
v2: Fixed pwq freeing in apply_workqueue_attrs() error path. Spotted
by Lai.
v3: The previous version incorrectly made a workqueue spanning
multiple nodes spread work items over all online CPUs when some of
its nodes don't have any desired cpus. Reimplemented so that NUMA
affinity is properly updated as CPUs go up and down. This problem
was spotted by Lai Jiangshan.
v4: destroy_workqueue() was putting wq->dfl_pwq and then clearing it;
however, wq may be freed at any time after dfl_pwq is put making
the clearing use-after-free. Clear wq->dfl_pwq before putting it.
v5: apply_workqueue_attrs() was leaking @tmp_attrs, @new_attrs and
@pwq_tbl after success. Fixed.
Retry loop in wq_update_unbound_numa_attrs() isn't necessary as
application of new attrs is excluded via CPU hotplug. Removed.
Documentation on CPU affinity guarantee on CPU_DOWN added.
All changes are suggested by Lai Jiangshan.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Factor out lock pool, put_pwq(), unlock sequence into
put_pwq_unlocked(). The two existing places are converted and there
will be more with NUMA affinity support.
This is to prepare for NUMA affinity support for unbound workqueues
and doesn't introduce any functional difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Factor out pool_workqueue linking and installation into numa_pwq_tbl[]
from apply_workqueue_attrs() into numa_pwq_tbl_install(). link_pwq()
is made safe to call multiple times. numa_pwq_tbl_install() links the
pwq, installs it into numa_pwq_tbl[] at the specified node and returns
the old entry.
@last_pwq is removed from link_pwq() as the return value of the new
function can be used instead.
This is to prepare for NUMA affinity support for unbound workqueues.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Use kmem_cache_alloc_node() with @pool->node instead of
kmem_cache_zalloc() when allocating a pool_workqueue so that it's
allocated on the same node as the associated worker_pool. As there's
no no kmem_cache_zalloc_node(), move zeroing to init_pwq().
This was suggested by Lai Jiangshan.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Break init_and_link_pwq() into init_pwq() and link_pwq() and move
unbound-workqueue specific handling into apply_workqueue_attrs().
Also, factor out unbound pool and pool_workqueue allocation into
alloc_unbound_pwq().
This reorganization is to prepare for NUMA affinity and doesn't
introduce any functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Currently, an unbound workqueue has only one "current" pool_workqueue
associated with it. It may have multple pool_workqueues but only the
first pool_workqueue servies new work items. For NUMA affinity, we
want to change this so that there are multiple current pool_workqueues
serving different NUMA nodes.
Introduce workqueue->numa_pwq_tbl[] which is indexed by NUMA node and
points to the pool_workqueue to use for each possible node. This
replaces first_pwq() in __queue_work() and workqueue_congested().
numa_pwq_tbl[] is currently initialized to point to the same
pool_workqueue as first_pwq() so this patch doesn't make any behavior
changes.
v2: Use rcu_dereference_raw() in unbound_pwq_by_node() as the function
may be called only with wq->mutex held.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Move wq->flags and ->cpu_pwqs to the end of workqueue_struct and align
them to the cacheline. These two fields are used in the work item
issue path and thus hot. The scheduled NUMA affinity support will add
dispatch table at the end of workqueue_struct and relocating these two
fields will allow us hitting only single cacheline on hot paths.
Note that wq->pwqs isn't moved although it currently is being used in
the work item issue path for unbound workqueues. The dispatch table
mentioned above will replace its use in the issue path, so it will
become cold once NUMA support is implemented.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Currently workqueue->name[] is of flexible length. We want to use the
flexible field for something more useful and there isn't much benefit
in allowing arbitrary name length anyway. Make it fixed len capping
at 24 bytes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Currently, when exposing attrs of an unbound workqueue via sysfs, the
workqueue_attrs of first_pwq() is used as that should equal the
current state of the workqueue.
The planned NUMA affinity support will make unbound workqueues make
use of multiple pool_workqueues for different NUMA nodes and the above
assumption will no longer hold. Introduce workqueue->unbound_attrs
which records the current attrs in effect and use it for sysfs instead
of first_pwq()->attrs.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
When worker tasks are created using kthread_create_on_node(),
currently only per-cpu ones have the matching NUMA node specified.
All unbound workers are always created with NUMA_NO_NODE.
Now that an unbound worker pool may have an arbitrary cpumask
associated with it, this isn't optimal. Add pool->node which is
determined by the pool's cpumask. If the pool's cpumask is contained
inside a NUMA node proper, the pool is associated with that node, and
all workers of the pool are created on that node.
This currently only makes difference for unbound worker pools with
cpumask contained inside single NUMA node, but this will serve as
foundation for making all unbound pools NUMA-affine.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Currently, all workqueue workers which have negative nice value has
'H' postfixed to their names. This is necessary for per-cpu workers
as they use the CPU number instead of pool->id to identify the pool
and the 'H' postfix is the only thing distinguishing normal and
highpri workers.
As workers for unbound pools use pool->id, the 'H' postfix is purely
informational. TASK_COMM_LEN is 16 and after the static part and
delimiters, there are only five characters left for the pool and
worker IDs. We're expecting to have more unbound pools with the
scheduled NUMA awareness support. Let's drop the non-essential 'H'
postfix from unbound kworker name.
While at it, restructure kthread_create*() invocation to help future
NUMA related changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Unbound workqueues are going to be NUMA-affine. Add wq_numa_tbl_len
and wq_numa_possible_cpumask[] in preparation. The former is the
highest NUMA node ID + 1 and the latter is masks of possibles CPUs for
each NUMA node.
This patch only introduces these. Future patches will make use of
them.
v2: NUMA initialization move into wq_numa_init(). Also, the possible
cpumask array is not created if there aren't multiple nodes on the
system. wq_numa_enabled bool added.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
The scheduled NUMA affinity support for unbound workqueues would need
to walk workqueues list and pool related operations on each workqueue.
Move wq_pool_mutex locking out of get/put_unbound_pool() to their
callers so that pool operations can be performed while walking the
workqueues list, which is also protected by wq_pool_mutex.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
29c91e9912 ("workqueue: implement attribute-based unbound worker_pool
management") implemented attrs based worker_pool matching. It tried
to avoid false negative when comparing cpumasks with custom hash
function; unfortunately, the hash and comparison functions fail to
ignore CPUs which are not possible. It incorrectly assumed that
bitmap_copy() skips leftover bits in the last word of bitmap and
cpumask_equal() ignores impossible CPUs.
This patch updates attrs->cpumask handling such that impossible CPUs
are properly ignored.
* Hash and copy functions no longer do anything special. They expect
their callers to clear impossible CPUs.
* alloc_workqueue_attrs() initializes the cpumask to cpu_possible_mask
instead of setting all bits and explicit cpumask_setall() for
unbound_std_wq_attrs[] in init_workqueues() is dropped.
* apply_workqueue_attrs() is now responsible for ignoring impossible
CPUs. It makes a copy of @attrs and clears impossible CPUs before
doing anything else.
Signed-off-by: Tejun Heo <tj@kernel.org>
8864b4e59 ("workqueue: implement get/put_pwq()") implemented pwq
(pool_workqueue) refcnting which frees workqueue when the last pwq
goes away. It determined whether it was the last pwq by testing
wq->pwqs is empty. Unfortunately, the test was done outside wq->mutex
and multiple pwq release could race and try to free wq multiple times
leading to oops.
Test wq->pwqs emptiness while holding wq->mutex.
Signed-off-by: Tejun Heo <tj@kernel.org>
To simplify locking, the previous patches expanded wq->mutex to
protect all fields of each workqueue instance including the pwqs list
leaving pwq_lock without any user. Remove the unused pwq_lock.
tj: Rebased on top of the current dev branch. Updated description.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
We're expanding wq->mutex to cover all fields specific to each
workqueue with the end goal of replacing pwq_lock which will make
locking simpler and easier to understand.
This patch makes wq->saved_max_active protected by wq->mutex instead
of pwq_lock. As pwq_lock locking around pwq_adjust_mac_active() is no
longer necessary, this patch also replaces pwq_lock lockings of
for_each_pwq() around pwq_adjust_max_active() to wq->mutex.
tj: Rebased on top of the current dev branch. Updated description.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
We're expanding wq->mutex to cover all fields specific to each
workqueue with the end goal of replacing pwq_lock which will make
locking simpler and easier to understand.
init_and_link_pwq() and pwq_unbound_release_workfn() already grab
wq->mutex when adding or removing a pwq from wq->pwqs list. This
patch makes it official that the list is wq->mutex protected for
writes and updates readers accoridingly. Explicit IRQ toggles for
sched-RCU read-locking in flush_workqueue_prep_pwqs() and
drain_workqueues() are removed as the surrounding wq->mutex can
provide sufficient synchronization.
Also, assert_rcu_or_pwq_lock() is renamed to assert_rcu_or_wq_mutex()
and checks for wq->mutex too.
pwq_lock locking and assertion are not removed by this patch and a
couple of for_each_pwq() iterations are still protected by it.
They'll be removed by future patches.
tj: Rebased on top of the current dev branch. Updated description.
Folded in assert_rcu_or_wq_mutex() renaming from a later patch
along with associated comment updates.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
We're expanding wq->mutex to cover all fields specific to each
workqueue with the end goal of replacing pwq_lock which will make
locking simpler and easier to understand.
wq->nr_drainers and ->flags are specific to each workqueue. Protect
->nr_drainers and ->flags with wq->mutex instead of pool_mutex.
tj: Rebased on top of the current dev branch. Updated description.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Currently pwq->flush_mutex protects many fields of a workqueue
including, especially, the pwqs list. We're going to expand this
mutex to protect most of a workqueue and eventually replace pwq_lock,
which will make locking simpler and easier to understand.
Drop the "flush_" prefix in preparation.
This patch is pure rename.
tj: Rebased on top of the current dev branch. Updated description.
Use WQ: and WR: instead of Q: and QR: for synchronization labels.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
wq->flush_mutex will be renamed to wq->mutex and cover all fields
specific to each workqueue and eventually replace pwq_lock, which will
make locking simpler and easier to understand.
Rename wq_mutex to wq_pool_mutex to avoid confusion with wq->mutex.
After the scheduled changes, wq_pool_mutex won't be protecting
anything specific to each workqueue instance anyway.
This patch is pure rename.
tj: s/wqs_mutex/wq_pool_mutex/. Rewrote description.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
If lockdep complains something for other subsystem, lockdep_is_held()
can be false negative, so we need to also test debug_locks before
triggering WARN.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
rcu_read_lock_sched() is better than preempt_disable() if the code is
protected by RCU_SCHED.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
If pwq_adjust_max_active() changes max_active from 0 to
saved_max_active, it needs to wakeup worker. This is already done by
thaw_workqueues().
If pwq_adjust_max_active() increases max_active for an unbound wq,
while not strictly necessary for correctness, it's still desirable to
wake up a worker so that the requested concurrency level is reached
sooner.
Move wake_up_worker() call from thaw_workqueues() to
pwq_adjust_max_active() so that it can handle both of the above two
cases. This also makes thaw_workqueues() simpler.
tj: Updated comments and description.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
We can test worker->recue_wq instead of reaching into
current_pwq->wq->rescuer and then comparing it to self.
tj: Commit message.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
get_unbound_pool() forgot to set POOL_FREEZING if workqueue_freezing
is set and a new pool could go out of sync with the global freezing
state.
Fix it by adding POOL_FREEZING if workqueue_freezing. wq_mutex is
already held so no further locking is necessary. This also removes
the unused static variable warning when !CONFIG_FREEZER.
tj: Updated commit message.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
With the recent addition of the custom attributes support, unbound
pools may have allowed cpumask which isn't full. As long as some of
CPUs in the cpumask are online, its workers will maintain cpus_allowed
as set on worker creation; however, once no online CPU is left in
cpus_allowed, the scheduler will reset cpus_allowed of any workers
which get scheduled so that they can execute.
To remain compliant to the user-specified configuration, CPU affinity
needs to be restored when a CPU becomes online for an unbound pool
which doesn't currently have any online CPUs before.
This patch implement restore_unbound_workers_cpumask(), which is
called from CPU_ONLINE for all unbound pools, checks whether the
coming up CPU is the first allowed online one, and, if so, invokes
set_cpus_allowed_ptr() with the configured cpumask on all workers.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Rebinding workers of a per-cpu pool after a CPU comes online involves
a lot of back-and-forth mostly because only the task itself could
adjust CPU affinity if PF_THREAD_BOUND was set.
As CPU_ONLINE itself couldn't adjust affinity, it had to somehow
coerce the workers themselves to perform set_cpus_allowed_ptr(). Due
to the various states a worker can be in, this led to three different
paths a worker may be rebound. worker->rebind_work is queued to busy
workers. Idle ones are signaled by unlinking worker->entry and call
idle_worker_rebind(). The manager isn't covered by either and
implements its own mechanism.
PF_THREAD_BOUND has been relaced with PF_NO_SETAFFINITY and CPU_ONLINE
itself now can manipulate CPU affinity of workers. This patch
replaces the existing rebind mechanism with direct one where
CPU_ONLINE iterates over all workers using for_each_pool_worker(),
restores CPU affinity, and clears WORKER_UNBOUND.
There are a couple subtleties. All bound idle workers should have
their runqueues set to that of the bound CPU; however, if the target
task isn't running, set_cpus_allowed_ptr() just updates the
cpus_allowed mask deferring the actual migration to when the task
wakes up. This is worked around by waking up idle workers after
restoring CPU affinity before any workers can become bound.
Another subtlety is stems from matching @pool->nr_running with the
number of running unbound workers. While DISASSOCIATED, all workers
are unbound and nr_running is zero. As workers become bound again,
nr_running needs to be adjusted accordingly; however, there is no good
way to tell whether a given worker is running without poking into
scheduler internals. Instead of clearing UNBOUND directly,
rebind_workers() replaces UNBOUND with another new NOT_RUNNING flag -
REBOUND, which will later be cleared by the workers themselves while
preparing for the next round of work item execution. The only change
needed for the workers is clearing REBOUND along with PREP.
* This patch leaves for_each_busy_worker() without any user. Removed.
* idle_worker_rebind(), busy_worker_rebind_fn(), worker->rebind_work
and rebind logic in manager_workers() removed.
* worker_thread() now looks at WORKER_DIE instead of testing whether
@worker->entry is empty to determine whether it needs to do
something special as dying is the only special thing now.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
rebind_workers() will be reimplemented in a way which makes it mostly
decoupled from the rest of worker management. Move rebind_workers()
so that it's located with other CPU hotplug related functions.
This patch is pure function relocation.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Make worker_ida an idr - worker_idr and use it to implement
for_each_pool_worker() which will be used to simplify worker rebinding
on CPU_ONLINE.
pool->worker_idr is protected by both pool->manager_mutex and
pool->lock so that it can be iterated while holding either lock.
* create_worker() allocates ID without installing worker pointer and
installs the pointer later using idr_replace(). This is because
worker ID is needed when creating the actual task to name it and the
new worker shouldn't be visible to iterations before fully
initialized.
* In destroy_worker(), ID removal is moved before kthread_stop().
This is again to guarantee that only fully working workers are
visible to for_each_pool_worker().
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
PF_THREAD_BOUND was originally used to mark kernel threads which were
bound to a specific CPU using kthread_bind() and a task with the flag
set allows cpus_allowed modifications only to itself. Workqueue is
currently abusing it to prevent userland from meddling with
cpus_allowed of workqueue workers.
What we need is a flag to prevent userland from messing with
cpus_allowed of certain kernel tasks. In kernel, anyone can
(incorrectly) squash the flag, and, for worker-type usages,
restricting cpus_allowed modification to the task itself doesn't
provide meaningful extra proection as other tasks can inject work
items to the task anyway.
This patch replaces PF_THREAD_BOUND with PF_NO_SETAFFINITY.
sched_setaffinity() checks the flag and return -EINVAL if set.
set_cpus_allowed_ptr() is no longer affected by the flag.
This will allow simplifying workqueue worker CPU affinity management.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Pull workqueue fix from Tejun Heo:
"Lai's patch to fix highly unlikely but still possible workqueue stall
during CPU hotunplug."
* 'for-3.9-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: fix possible pool stall bug in wq_unbind_fn()
With the recent locking updates, the only thing protected by
workqueue_lock is workqueue->maydays list. Rename workqueue_lock to
wq_mayday_lock.
This patch is pure rename.
Signed-off-by: Tejun Heo <tj@kernel.org>
This patch continues locking cleanup from the previous patch. It
breaks out pool_workqueue synchronization from workqueue_lock into a
new spinlock - pwq_lock. The followings are protected by pwq_lock.
* workqueue->pwqs
* workqueue->saved_max_active
The conversion is straight-forward. workqueue_lock usages which cover
the above two are converted to pwq_lock. New locking label PW added
for things protected by pwq_lock and FR is updated to mean flush_mutex
+ pwq_lock + sched-RCU.
This patch shouldn't introduce any visible behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Currently, workqueue_lock protects most shared workqueue resources -
the pools, workqueues, pool_workqueues, draining, ID assignments,
mayday handling and so on. The coverage has grown organically and
there is no identified bottleneck coming from workqueue_lock, but it
has grown a bit too much and scheduled rebinding changes need the
pools and workqueues to be protected by a mutex instead of a spinlock.
This patch breaks out pool and workqueue synchronization from
workqueue_lock into a new mutex - wq_mutex. The followings are
protected by wq_mutex.
* worker_pool_idr and unbound_pool_hash
* pool->refcnt
* workqueues list
* workqueue->flags, ->nr_drainers
Most changes are mostly straight-forward. workqueue_lock is replaced
with wq_mutex where applicable and workqueue_lock lock/unlocks are
added where wq_mutex conversion leaves data structures not protected
by wq_mutex without locking. irq / preemption flippings were added
where the conversion affects them. Things worth noting are
* New WQ and WR locking lables added along with
assert_rcu_or_wq_mutex().
* worker_pool_assign_id() now expects to be called under wq_mutex.
* create_mutex is removed from get_unbound_pool(). It now just holds
wq_mutex.
This patch shouldn't introduce any visible behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
When a manager creates or destroys workers, the operations are always
done with the manager_mutex held; however, initial worker creation or
worker destruction during pool release don't grab the mutex. They are
still correct as initial worker creation doesn't require
synchronization and grabbing manager_arb provides enough exclusion for
pool release path.
Still, let's make everyone follow the same rules for consistency and
such that lockdep annotations can be added.
Update create_and_start_worker() and put_unbound_pool() to grab
manager_mutex around thread creation and destruction respectively and
add lockdep assertions to create_worker() and destroy_worker().
This patch doesn't introduce any visible behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
get_unbound_pool(), workqueue_cpu_up_callback() and init_workqueues()
have similar code pieces to create and start the initial worker factor
those out into create_and_start_worker().
This patch doesn't introduce any functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Manager operations are currently governed by two mutexes -
pool->manager_arb and ->assoc_mutex. The former is used to decide who
gets to be the manager and the latter to exclude the actual manager
operations including creation and destruction of workers. Anyone who
grabs ->manager_arb must perform manager role; otherwise, the pool
might stall.
Grabbing ->assoc_mutex blocks everyone else from performing manager
operations but doesn't require the holder to perform manager duties as
it's merely blocking manager operations without becoming the manager.
Because the blocking was necessary when [dis]associating per-cpu
workqueues during CPU hotplug events, the latter was named
assoc_mutex. The mutex is scheduled to be used for other purposes, so
this patch gives it a more fitting generic name - manager_mutex - and
updates / adds comments to explain synchronization around the manager
role and operations.
This patch is pure rename / doc update.
Signed-off-by: Tejun Heo <tj@kernel.org>
There's no reason to make these trivial wrappers full (exported)
functions. Inline the followings.
queue_work()
queue_delayed_work()
mod_delayed_work()
schedule_work_on()
schedule_work()
schedule_delayed_work_on()
schedule_delayed_work()
keventd_up()
Signed-off-by: Tejun Heo <tj@kernel.org>
Rename @id argument of for_each_pool() to @pi so that it doesn't get
reused accidentally when for_each_pool() is used in combination with
other iterators.
This patch is purely cosmetic.
Signed-off-by: Tejun Heo <tj@kernel.org>
* Update incorrect and add missing synchronization labels.
* Update incorrect or misleading comments. Add new comments where
clarification is necessary. Reformat / rephrase some comments.
* drain_workqueue() can be used separately from destroy_workqueue()
but its warning message was incorrectly referring to destruction.
Other than the warning message change, this patch doesn't make any
functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Since 9e8cd2f589 ("workqueue: implement apply_workqueue_attrs()"),
init_and_link_pwq() may be called to initialize a new pool_workqueue
for a workqueue which is already online, but the function was setting
pwq->max_active to wq->saved_max_active without proper
synchronization.
Fix it by calling pwq_adjust_max_active() under proper locking instead
of manually setting max_active.
Signed-off-by: Tejun Heo <tj@kernel.org>
Rename pwq_set_max_active() to pwq_adjust_max_active() and move
pool_workqueue->max_active synchronization and max_active
determination logic into it.
The new function should be called with workqueue_lock held for stable
workqueue->saved_max_active, determines the current max_active value
the target pool_workqueue should be using from @wq->saved_max_active
and the state of the associated pool, and applies it with proper
synchronization.
The current two users - workqueue_set_max_active() and
thaw_workqueues() - are updated accordingly. In addition, the manual
freezing handling in __alloc_workqueue_key() and
freeze_workqueues_begin() are replaced with calls to
pwq_adjust_max_active().
This centralizes max_active handling so that it's less error-prone.
Signed-off-by: Tejun Heo <tj@kernel.org>
pwq_set_max_active() is gonna be modified and used during
pool_workqueue init. Move it above init_and_link_pwq().
This patch is pure code reorganization and doesn't introduce any
functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
idr_get_new*() and friends are about to be deprecated. Convert to the
new idr_alloc() interface.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Implement a function which queries whether it currently is running off
a workqueue rescuer. This will be used to convert writeback to
workqueue.
Signed-off-by: Tejun Heo <tj@kernel.org>
There are cases where workqueue users want to expose control knobs to
userland. e.g. Unbound workqueues with custom attributes are
scheduled to be used for writeback workers and depending on
configuration it can be useful to allow admins to tinker with the
priority or allowed CPUs.
This patch implements workqueue_sysfs_register(), which makes the
workqueue visible under /sys/bus/workqueue/devices/WQ_NAME. There
currently are two attributes common to both per-cpu and unbound pools
and extra attributes for unbound pools including nice level and
cpumask.
If alloc_workqueue*() is called with WQ_SYSFS,
workqueue_sysfs_register() is called automatically as part of
workqueue creation. This is the preferred method unless the workqueue
user wants to apply workqueue_attrs before making the workqueue
visible to userland.
v2: Disallow exposing ordered workqueues as ordered workqueues can't
be tuned in any way.
Signed-off-by: Tejun Heo <tj@kernel.org>
Adjusting max_active of or applying new workqueue_attrs to an ordered
workqueue breaks its ordering guarantee. The former is obvious. The
latter is because applying attrs creates a new pwq (pool_workqueue)
and there is no ordering constraint between the old and new pwqs.
Make apply_workqueue_attrs() and workqueue_set_max_active() trigger
WARN_ON() if those operations are requested on an ordered workqueue
and fail / ignore respectively.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
We're gonna add another internal WQ flag. Let's make the distinction
clear. Prefix WQ_DRAINING with __ and move it to bit 16.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Implement apply_workqueue_attrs() which applies workqueue_attrs to the
specified unbound workqueue by creating a new pwq (pool_workqueue)
linked to worker_pool with the specified attributes.
A new pwq is linked at the head of wq->pwqs instead of tail and
__queue_work() verifies that the first unbound pwq has positive refcnt
before choosing it for the actual queueing. This is to cover the case
where creation of a new pwq races with queueing. As base ref on a pwq
won't be dropped without making another pwq the first one,
__queue_work() is guaranteed to make progress and not add work item to
a dead pwq.
init_and_link_pwq() is updated to return the last first pwq the new
pwq replaced, which is put by apply_workqueue_attrs().
Note that apply_workqueue_attrs() is almost identical to unbound pwq
part of alloc_and_link_pwqs(). The only difference is that there is
no previous first pwq. apply_workqueue_attrs() is implemented to
handle such cases and replaces unbound pwq handling in
alloc_and_link_pwqs().
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Because per-cpu workqueues have multiple pwqs (pool_workqueues) to
serve the CPUs, to guarantee that a single work item isn't queued on
one pwq while still executing another, __queue_work() takes a look at
the previous pool the target work item was on and if it's still
executing there, queue the work item on that pool.
To support changing workqueue_attrs on the fly, unbound workqueues too
will have multiple pwqs and thus need non-reentrancy test when
queueing. This patch modifies __queue_work() such that the reentrancy
test is performed regardless of the workqueue type.
per_cpu_ptr(wq->cpu_pwqs, cpu) used to be used to determine the
matching pwq for the last pool. This can't be used for unbound
workqueues and is replaced with worker->current_pwq which also happens
to be simpler.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Unbound pwqs (pool_workqueues) will be dynamically created and
destroyed with the scheduled unbound workqueue w/ custom attributes
support. This patch synchronizes pwq linking and unlinking against
flush_workqueue() so that its operation isn't disturbed by pwqs coming
and going.
Linking and unlinking a pwq into wq->pwqs is now protected also by
wq->flush_mutex and a new pwq's work_color is initialized to
wq->work_color during linking. This ensures that pwqs changes don't
disturb flush_workqueue() in progress and the new pwq's work coloring
stays in sync with the rest of the workqueue.
flush_mutex during unlinking isn't strictly necessary but it's simpler
to do it anyway.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Add pool_workqueue->refcnt along with get/put_pwq(). Both per-cpu and
unbound pwqs have refcnts and any work item inserted on a pwq
increments the refcnt which is dropped when the work item finishes.
For per-cpu pwqs the base ref is never dropped and destroy_workqueue()
frees the pwqs as before. For unbound ones, destroy_workqueue()
simply drops the base ref on the first pwq. When the refcnt reaches
zero, pwq_unbound_release_workfn() is scheduled on system_wq, which
unlinks the pwq, puts the associated pool and frees the pwq and wq as
necessary. This needs to be done from a work item as put_pwq() needs
to be protected by pool->lock but release can't happen with the lock
held - e.g. put_unbound_pool() involves blocking operations.
Unbound pool->locks are marked with lockdep subclas 1 as put_pwq()
will schedule the release work item on system_wq while holding the
unbound pool's lock and triggers recursive locking warning spuriously.
This will be used to implement dynamic creation and destruction of
unbound pwqs.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
* Move initialization and linking of pool_workqueues into
init_and_link_pwq().
* Make the failure path use destroy_workqueue() once pool_workqueue
initialization succeeds.
These changes are to prepare for dynamic management of pool_workqueues
and don't introduce any functional changes.
While at it, convert list_del(&wq->list) to list_del_init() as a
precaution as scheduled changes will make destruction more complex.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
WQ_RESCUER is superflous. WQ_MEM_RECLAIM indicates that the user
wants a rescuer and testing wq->rescuer for NULL can answer whether a
given workqueue has a rescuer or not. Drop WQ_RESCUER and test
wq->rescuer directly.
This will help simplifying __alloc_workqueue_key() failure path by
allowing it to use destroy_workqueue() on a partially constructed
workqueue, which in turn will help implementing dynamic management of
pool_workqueues.
While at it, clear wq->rescuer after freeing it in
destroy_workqueue(). This is a precaution as scheduled changes will
make destruction more complex.
This patch doesn't introduce any functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
There are gonna be multiple unbound pools. Include pool ID in the
name of unbound kworkers.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
All per-cpu pools are standard, so there's no need to use both "cpu"
and "std" and for_each_std_worker_pool() is confusing in that it can
be used only for per-cpu pools.
* s/cpu_std_worker_pools/cpu_worker_pools/
* s/for_each_std_worker_pool()/for_each_cpu_worker_pool()/
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Workqueue no longer makes use of unbound_std_worker_pools[]. All
unbound worker_pools are created dynamically and there's nothing
special about the standard ones. With unbound_std_worker_pools[]
unused, workqueue no longer has places where it needs to treat the
per-cpu pools-cpu and unbound pools together.
Remove unbound_std_worker_pools[] and the helpers wrapping it to
present unified per-cpu and unbound standard worker_pools.
* for_each_std_worker_pool() now only walks through per-cpu pools.
* for_each[_online]_wq_cpu() which don't have any users left are
removed.
* std_worker_pools() and std_worker_pool_pri() are unused and removed.
* get_std_worker_pool() is removed. Its only user -
alloc_and_link_pwqs() - only used it for per-cpu pools anyway. Open
code per_cpu access in alloc_and_link_pwqs() instead.
This patch doesn't introduce any functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
This patch makes unbound worker_pools reference counted and
dynamically created and destroyed as workqueues needing them come and
go. All unbound worker_pools are hashed on unbound_pool_hash which is
keyed by the content of worker_pool->attrs.
When an unbound workqueue is allocated, get_unbound_pool() is called
with the attributes of the workqueue. If there already is a matching
worker_pool, the reference count is bumped and the pool is returned.
If not, a new worker_pool with matching attributes is created and
returned.
When an unbound workqueue is destroyed, put_unbound_pool() is called
which decrements the reference count of the associated worker_pool.
If the refcnt reaches zero, the worker_pool is destroyed in sched-RCU
safe way.
Note that the standard unbound worker_pools - normal and highpri ones
with no specific cpumask affinity - are no longer created explicitly
during init_workqueues(). init_workqueues() only initializes
workqueue_attrs to be used for standard unbound pools -
unbound_std_wq_attrs[]. The pools are spawned on demand as workqueues
are created.
v2: - Comment added to init_worker_pool() explaining that @pool should
be in a condition which can be passed to put_unbound_pool() even
on failure.
- pool->refcnt reaching zero and the pool being removed from
unbound_pool_hash should be dynamic. pool->refcnt is converted
to int from atomic_t and now manipulated inside workqueue_lock.
- Removed an incorrect sanity check on nr_idle in
put_unbound_pool() which may trigger spuriously.
All changes were suggested by Lai Jiangshan.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Introduce struct workqueue_attrs which carries worker attributes -
currently the nice level and allowed cpumask along with helper
routines alloc_workqueue_attrs() and free_workqueue_attrs().
Each worker_pool now carries ->attrs describing the attributes of its
workers. All functions dealing with cpumask and nice level of workers
are updated to follow worker_pool->attrs instead of determining them
from other characteristics of the worker_pool, and init_workqueues()
is updated to set worker_pool->attrs appropriately for all standard
pools.
Note that create_worker() is updated to always perform set_user_nice()
and use set_cpus_allowed_ptr() combined with manual assertion of
PF_THREAD_BOUND instead of kthread_bind(). This simplifies handling
random attributes without affecting the outcome.
This patch doesn't introduce any behavior changes.
v2: Missing cpumask_var_t definition caused build failure on some
archs. linux/cpumask.h included.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
This will be used to implement unbound pools with custom attributes.
This patch doesn't introduce any functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
POOL_MANAGING_WORKERS is used to synchronize the manager role.
Synchronizing among workers doesn't need blocking and that's why it's
implemented as a flag.
It got converted to a mutex a while back to add blocking wait from CPU
hotplug path - 6037315269 ("workqueue: use mutex for global_cwq
manager exclusion"). Later it turned out that synchronization among
workers and cpu hotplug need to be done separately. Eventually,
POOL_MANAGING_WORKERS is restored and workqueue->manager_mutex got
morphed into workqueue->assoc_mutex - 552a37e936 ("workqueue: restore
POOL_MANAGING_WORKERS") and b2eb83d123 ("workqueue: rename
manager_mutex to assoc_mutex").
Now, we're gonna need to be able to lock out managers from
destroy_workqueue() to support multiple unbound pools with custom
attributes making it again necessary to be able to block on the
manager role. This patch replaces POOL_MANAGING_WORKERS with
worker_pool->manager_arb.
This patch doesn't introduce any behavior changes.
v2: s/manager_mutex/manager_arb/
Signed-off-by: Tejun Heo <tj@kernel.org>
Make worker_pool_idr protected by workqueue_lock for writes and
sched-RCU protected for reads. Lockdep assertions are added to
for_each_pool() and get_work_pool() and all their users are converted
to either hold workqueue_lock or disable preemption/irq.
worker_pool_assign_id() is updated to hold workqueue_lock when
allocating a pool ID. As idr_get_new() always performs RCU-safe
assignment, this is enough on the writer side.
As standard pools are never destroyed, there's nothing to do on that
side.
The locking is superflous at this point. This is to help
implementation of unbound pools/pwqs with custom attributes.
This patch doesn't introduce any behavior changes.
v2: Updated for_each_pwq() use if/else for the hidden assertion
statement instead of just if as suggested by Lai. This avoids
confusing the following else clause.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Make workqueue->pwqs protected by workqueue_lock for writes and
sched-RCU protected for reads. Lockdep assertions are added to
for_each_pwq() and first_pwq() and all their users are converted to
either hold workqueue_lock or disable preemption/irq.
alloc_and_link_pwqs() is updated to use list_add_tail_rcu() for
consistency which isn't strictly necessary as the workqueue isn't
visible. destroy_workqueue() isn't updated to sched-RCU release pwqs.
This is okay as the workqueue should have on users left by that point.
The locking is superflous at this point. This is to help
implementation of unbound pools/pwqs with custom attributes.
This patch doesn't introduce any behavior changes.
v2: Updated for_each_pwq() use if/else for the hidden assertion
statement instead of just if as suggested by Lai. This avoids
confusing the following else clause.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
get_pwq() takes @cpu, which can also be WORK_CPU_UNBOUND, and @wq and
returns the matching pwq (pool_workqueue). We want to move away from
using @cpu for identifying pools and pwqs for unbound pools with
custom attributes and there is only one user - workqueue_congested() -
which makes use of the WQ_UNBOUND conditional in get_pwq(). All other
users already know whether they're dealing with a per-cpu or unbound
workqueue.
Replace get_pwq() with explicit per_cpu_ptr(wq->cpu_pwqs, cpu) for
per-cpu workqueues and first_pwq() for unbound ones, and open-code
WQ_UNBOUND conditional in workqueue_congested().
Note that this makes workqueue_congested() behave sligntly differently
when @cpu other than WORK_CPU_UNBOUND is specified. It ignores @cpu
for unbound workqueues and always uses the first pwq instead of
oopsing.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
workqueue->pool_wq union is used to point either to percpu pwqs
(pool_workqueues) or single unbound pwq. As the first pwq can be
accessed via workqueue->pwqs list, there's no reason for the single
pointer anymore.
Use list_first_entry(workqueue->pwqs) to access the unbound pwq and
drop workqueue->pool_wq.single pointer and the pool_wq union. It
simplifies the code and eases implementing multiple unbound pools w/
custom attributes.
This patch doesn't introduce any visible behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Workqueue is mixing unsigned int and int for @cpu variables. There's
no point in using unsigned int for cpus - many of cpu related APIs
take int anyway. Consistently use int for @cpu variables so that we
can use negative values to mark special ones.
This patch doesn't introduce any visible behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Similar to how pool_workqueue iteration used to be, raising and
servicing mayday requests is based on CPU numbers. It's hairy because
cpumask_t may not be able to handle WORK_CPU_UNBOUND and cpumasks are
assumed to be always set on UP. This is ugly and can't handle
multiple unbound pools to be added for unbound workqueues w/ custom
attributes.
Add workqueue_struct->maydays. When a pool_workqueue needs rescuing,
it gets chained on the list through pool_workqueue->mayday_node and
rescuer_thread() consumes the list until it's empty.
This patch doesn't introduce any visible behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
The three freeze/thaw related functions - freeze_workqueues_begin(),
freeze_workqueues_busy() and thaw_workqueues() - need to iterate
through all pool_workqueues of all freezable workqueues. They did it
by first iterating pools and then visiting all pwqs (pool_workqueues)
of all workqueues and process it if its pwq->pool matches the current
pool. This is rather backwards and done this way partly because
workqueue didn't have fitting iteration helpers and partly to avoid
the number of lock operations on pool->lock.
Workqueue now has fitting iterators and the locking operation overhead
isn't anything to worry about - those locks are unlikely to be
contended and the same CPU visiting the same set of locks multiple
times isn't expensive.
Restructure the three functions such that the flow better matches the
logical steps and pwq iteration is done using for_each_pwq() inside
workqueue iteration.
* freeze_workqueues_begin(): Setting of FREEZING is moved into a
separate for_each_pool() iteration. pwq iteration for clearing
max_active is updated as described above.
* freeze_workqueues_busy(): pwq iteration updated as described above.
* thaw_workqueues(): The single for_each_wq_cpu() iteration is broken
into three discrete steps - clearing FREEZING, restoring max_active,
and kicking workers. The first and last steps use for_each_pool()
and the second step uses pwq iteration described above.
This makes the code easier to understand and removes the use of
for_each_wq_cpu() for walking pwqs, which can't support multiple
unbound pwqs which will be needed to implement unbound workqueues with
custom attributes.
This patch doesn't introduce any visible behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
With the scheduled unbound pools with custom attributes, there will be
multiple unbound pools, so it wouldn't be able to use
for_each_wq_cpu() + for_each_std_worker_pool() to iterate through all
pools.
Introduce for_each_pool() which iterates through all pools using
worker_pool_idr and use it instead of for_each_wq_cpu() +
for_each_std_worker_pool() combination in freeze_workqueues_begin().
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Introduce for_each_pwq() which iterates all pool_workqueues of a
workqueue using the recently added workqueue->pwqs list and replace
for_each_pwq_cpu() usages with it.
This is primarily to remove the single unbound CPU assumption from pwq
iteration for the scheduled unbound pools with custom attributes
support which would introduce multiple unbound pwqs per workqueue;
however, it also simplifies iterator users.
Note that pwq->pool initialization is moved to alloc_and_link_pwqs()
as that now is the only place which is explicitly handling the two pwq
types.
This patch doesn't introduce any visible behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Add workqueue_struct->pwqs list and chain all pool_workqueues
belonging to a workqueue there. This will be used to implement
generic pool_workqueue iteration and handle multiple pool_workqueues
for the scheduled unbound pools with custom attributes.
This patch doesn't introduce any visible behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
pool_workqueues need to be aligned to 1 << WORK_STRUCT_FLAG_BITS as
the lower bits of work->data are used for flags when they're pointing
to pool_workqueues.
Due to historical reasons, unbound pool_workqueues are allocated using
kzalloc() with sufficient buffer area for alignment and aligned
manually. The original pointer is stored at the end which free_pwqs()
retrieves when freeing it.
There's no reason for this hackery anymore. Set alignment of struct
pool_workqueue to 1 << WORK_STRUCT_FLAG_BITS, add kmem_cache for
pool_workqueues with proper alignment and replace the hacky alloc and
free implementation with plain kmem_cache_zalloc/free().
In case WORK_STRUCT_FLAG_BITS gets shrunk too much and makes fields of
pool_workqueues misaligned, trigger WARN if the alignment of struct
pool_workqueue becomes smaller than that of long long.
Note that assertion on IS_ALIGNED() is removed from alloc_pwqs(). We
already have another one in pwq init loop in __alloc_workqueue_key().
This patch doesn't introduce any visible behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
workqueue_lock will be used to synchronize areas which require
irq-safety and there isn't much benefit in keeping it not irq-safe.
Make it irq-safe.
This patch doesn't introduce any visible behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Workqueue has been using mostly BUG_ON()s for sanity checks, which
fail unnecessarily harshly when the assertion doesn't hold. Most
assertions can converted to be less drastic such that things can limp
along instead of dying completely. Convert BUG_ON()s to
WARN_ON[_ONCE]()s with softer failure behaviors - e.g. if assertion
check fails in destroy_worker(), trigger WARN and silently ignore
destruction request.
Most conversions are trivial. Note that sanity checks in
destroy_workqueue() are moved above removal from workqueues list so
that it can bail out without side-effects if assertion checks fail.
This patch doesn't introduce any visible behavior changes during
normal operation.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Since multiple pools per cpu have been introduced, wq_unbind_fn() has
a subtle bug which may theoretically stall work item processing. The
problem is two-fold.
* wq_unbind_fn() depends on the worker executing wq_unbind_fn() itself
to start unbound chain execution, which works fine when there was
only single pool. With multiple pools, only the pool which is
running wq_unbind_fn() - the highpri one - is guaranteed to have
such kick-off. The other pool could stall when its busy workers
block.
* The current code is setting WORKER_UNBIND / POOL_DISASSOCIATED of
the two pools in succession without initiating work execution
inbetween. Because setting the flags requires grabbing assoc_mutex
which is held while new workers are created, this could lead to
stalls if a pool's manager is waiting for the previous pool's work
items to release memory. This is almost purely theoretical tho.
Update wq_unbind_fn() such that it sets WORKER_UNBIND /
POOL_DISASSOCIATED, goes over schedule() and explicitly kicks off
execution for a pool and then moves on to the next one.
tj: Updated comments and description.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
Rescuers visit different worker_pools to process work items from pools
under pressure. Currently, rescuer->pool is updated outside any
locking and when an outsider looks at a rescuer, there's no way to
tell when and whether rescuer->pool is gonna change. While this
doesn't currently cause any problem, it is nasty.
With recent worker_maybe_bind_and_lock() changes, we can move
rescuer->pool updates inside pool locks such that if rescuer->pool
equals a locked pool, it's guaranteed to stay that way until the pool
is unlocked.
Move rescuer->pool inside pool->lock.
This patch doesn't introduce any visible behavior difference.
tj: Updated the description.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
worker_maybe_bind_and_lock() currently takes @worker but only cares
about @worker->pool. This patch updates worker_maybe_bind_and_lock()
to take @pool instead of @worker. This will be used to better define
synchronization rules regarding rescuer->pool updates.
This doesn't introduce any functional change.
tj: Updated the comments and description.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
worker_maybe_bind_and_lock() uses both @worker->task and @current at
the same time. As worker_maybe_bind_and_lock() can only be called by
the current worker task, they are always the same.
Update worker_maybe_bind_and_lock() to use %current consistently.
This doesn't introduce any functional change.
tj: Massaged the description.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
I'm not sure why, but the hlist for each entry iterators were conceived
list_for_each_entry(pos, head, member)
The hlist ones were greedy and wanted an extra parameter:
hlist_for_each_entry(tpos, pos, head, member)
Why did they need an extra pos parameter? I'm not quite sure. Not only
they don't really need it, it also prevents the iterator from looking
exactly like the list iterator, which is unfortunate.
Besides the semantic patch, there was some manual work required:
- Fix up the actual hlist iterators in linux/list.h
- Fix up the declaration of other iterators based on the hlist ones.
- A very small amount of places were using the 'node' parameter, this
was modified to use 'obj->member' instead.
- Coccinelle didn't handle the hlist_for_each_entry_safe iterator
properly, so those had to be fixed up manually.
The semantic patch which is mostly the work of Peter Senna Tschudin is here:
@@
iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host;
type T;
expression a,c,d,e;
identifier b;
statement S;
@@
-T b;
<+... when != b
(
hlist_for_each_entry(a,
- b,
c, d) S
|
hlist_for_each_entry_continue(a,
- b,
c) S
|
hlist_for_each_entry_from(a,
- b,
c) S
|
hlist_for_each_entry_rcu(a,
- b,
c, d) S
|
hlist_for_each_entry_rcu_bh(a,
- b,
c, d) S
|
hlist_for_each_entry_continue_rcu_bh(a,
- b,
c) S
|
for_each_busy_worker(a, c,
- b,
d) S
|
ax25_uid_for_each(a,
- b,
c) S
|
ax25_for_each(a,
- b,
c) S
|
inet_bind_bucket_for_each(a,
- b,
c) S
|
sctp_for_each_hentry(a,
- b,
c) S
|
sk_for_each(a,
- b,
c) S
|
sk_for_each_rcu(a,
- b,
c) S
|
sk_for_each_from
-(a, b)
+(a)
S
+ sk_for_each_from(a) S
|
sk_for_each_safe(a,
- b,
c, d) S
|
sk_for_each_bound(a,
- b,
c) S
|
hlist_for_each_entry_safe(a,
- b,
c, d, e) S
|
hlist_for_each_entry_continue_rcu(a,
- b,
c) S
|
nr_neigh_for_each(a,
- b,
c) S
|
nr_neigh_for_each_safe(a,
- b,
c, d) S
|
nr_node_for_each(a,
- b,
c) S
|
nr_node_for_each_safe(a,
- b,
c, d) S
|
- for_each_gfn_sp(a, c, d, b) S
+ for_each_gfn_sp(a, c, d) S
|
- for_each_gfn_indirect_valid_sp(a, c, d, b) S
+ for_each_gfn_indirect_valid_sp(a, c, d) S
|
for_each_host(a,
- b,
c) S
|
for_each_host_safe(a,
- b,
c, d) S
|
for_each_mesh_entry(a,
- b,
c, d) S
)
...+>
[akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c]
[akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c]
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix warnings]
[akpm@linux-foudnation.org: redo intrusive kvm changes]
Tested-by: Peter Senna Tschudin <peter.senna@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
commit d8e794dfd5 ("workqueue: set
delayed_work->timer function on initialization") exports function
delayed_work_timer_fn() only for GPL modules. This makes delayed-works
unusable for non-GPL modules, because initialization macro now requires
GPL symbol. For example schedule_delayed_work() available for non-GPL.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org # 3.7
workqueue has moved away from global_cwqs to worker_pools and with the
scheduled custom worker pools, wforkqueues will be associated with
pools which don't have anything to do with CPUs. The workqueue code
went through significant amount of changes recently and mass renaming
isn't likely to hurt much additionally. Let's replace 'cpu' with
'pool' so that it reflects the current design.
* s/struct cpu_workqueue_struct/struct pool_workqueue/
* s/cpu_wq/pool_wq/
* s/cwq/pwq/
This patch is purely cosmetic.
Signed-off-by: Tejun Heo <tj@kernel.org>
is_chained_work() was added before current_wq_worker() and implemented
its own ham-fisted way of finding out whether %current is a workqueue
worker - it iterates through all possible workers.
Drop the custom implementation and reimplement using
current_wq_worker().
Signed-off-by: Tejun Heo <tj@kernel.org>
c9e7cf273f ("workqueue: move busy_hash from global_cwq to
worker_pool") incorrectly converted is_chained_work() to use
get_gcwq() inside for_each_gcwq_cpu() while removing get_gcwq().
As cwq might not exist for all possible workqueue CPUs, @cwq can be
NULL and the following cwq deferences can lead to oops.
Fix it by using for_each_cwq_cpu() instead, which is the better one to
use anyway as we only need to check pools that the wq is associated
with.
Signed-off-by: Tejun Heo <tj@kernel.org>
Currently, __queue_work() chooses the pool to queue a work item to and
then determines cwq from the target wq and the chosen pool. This is a
bit backwards in that we can determine cwq first and simply use
cwq->pool. This way, we can skip get_std_worker_pool() in queueing
path which will be a hurdle when implementing custom worker pools.
Update __queue_work() such that it chooses the target cwq and then use
cwq->pool instead of the other way around. While at it, add missing
{} in an if statement.
This patch doesn't introduce any functional changes.
tj: The original patch had two get_cwq() calls - the first to
determine the pool by doing get_cwq(cpu, wq)->pool and the second
to determine the matching cwq from get_cwq(pool->cpu, wq).
Updated the function such that it chooses cwq instead of pool and
removed the second call. Rewrote the description.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
get_work_pool_id() currently first obtains pool using get_work_pool()
and then return pool->id. For an off-queue work item, this involves
obtaining pool ID from worker->data, performing idr_find() to find the
matching pool and then returning its pool->id which of course is the
same as the one which went into idr_find().
Just open code WORK_STRUCT_CWQ case and directly return pool ID from
work->data.
tj: The original patch dropped on-queue work item handling and renamed
the function to offq_work_pool_id(). There isn't much benefit in
doing so. Handling it only requires a single if() and we need at
least BUG_ON(), which is also a branch, even if we drop on-queue
handling. Open code WORK_STRUCT_CWQ case and keep the function in
line with get_work_pool(). Rewrote the description.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
As nr_running is likely to be accessed from other CPUs during
try_to_wake_up(), it was kept outside worker_pool; however, while less
frequent, other fields in worker_pool are accessed from other CPUs
for, e.g., non-reentrancy check. Also, with recent pool related
changes, accessing nr_running matching the worker_pool isn't as simple
as it used to be.
Move nr_running inside worker_pool. Keep it aligned to cacheline and
define CPU pools using DEFINE_PER_CPU_SHARED_ALIGNED(). This should
give at least the same cacheline behavior.
get_pool_nr_running() is replaced with direct pool->nr_running
accesses.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Joonsoo Kim <js1304@gmail.com>
With the recent is-work-queued-here test simplification, the nested
if() in try_to_grab_pending() can be collapsed. Collapse it.
This patch is purely cosmetic.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Currently, determining whether a work item is queued on a locked pool
involves somewhat convoluted memory barrier dancing. It goes like the
following.
* When a work item is queued on a pool, work->data is updated before
work->entry is linked to the pending list with a wmb() inbetween.
* When trying to determine whether a work item is currently queued on
a pool pointed to by work->data, it locks the pool and looks at
work->entry. If work->entry is linked, we then do rmb() and then
check whether work->data points to the current pool.
This works because, work->data can only point to a pool if it
currently is or were on the pool and,
* If it currently is on the pool, the tests would obviously succeed.
* It it left the pool, its work->entry was cleared under pool->lock,
so if we're seeing non-empty work->entry, it has to be from the work
item being linked on another pool. Because work->data is updated
before work->entry is linked with wmb() inbetween, work->data update
from another pool is guaranteed to be visible if we do rmb() after
seeing non-empty work->entry. So, we either see empty work->entry
or we see updated work->data pointin to another pool.
While this works, it's convoluted, to put it mildly. With recent
updates, it's now guaranteed that work->data points to cwq only while
the work item is queued and that updating work->data to point to cwq
or back to pool is done under pool->lock, so we can simply test
whether work->data points to cwq which is associated with the
currently locked pool instead of the convoluted memory barrier
dancing.
This patch replaces the memory barrier based "are you still here,
really?" test with much simpler "does work->data points to me?" test -
if work->data points to a cwq which is associated with the currently
locked pool, the work item is guaranteed to be queued on the pool as
work->data can start and stop pointing to such cwq only under
pool->lock and the start and stop coincide with queue and dequeue.
tj: Rewrote the comments and description.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
We plan to use work->data pointing to cwq as the synchronization
invariant when determining whether a given work item is on a locked
pool or not, which requires work->data pointing to cwq only while the
work item is queued on the associated pool.
With delayed_work updated not to overload work->data for target
workqueue recording, the only case where we still have off-queue
work->data pointing to cwq is try_to_grab_pending() which doesn't
update work->data after stealing a queued work item. There's no
reason for try_to_grab_pending() to not update work->data to point to
the pool instead of cwq, like the normal execution does.
This patch adds set_work_pool_and_keep_pending() which makes
work->data point to pool instead of cwq but keeps the pending bit
unlike set_work_pool_and_clear_pending() (surprise!).
After this patch, it's guaranteed that only queued work items point to
cwqs.
This patch doesn't introduce any visible behavior change.
tj: Renamed the new helper function to match
set_work_pool_and_clear_pending() and rewrote the description.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
To avoid executing the same work item from multiple CPUs concurrently,
a work_struct records the last pool it was on in its ->data so that,
on the next queueing, the pool can be queried to determine whether the
work item is still executing or not.
A delayed_work goes through timer before actually being queued on the
target workqueue and the timer needs to know the target workqueue and
CPU. This is currently achieved by modifying delayed_work->work.data
such that it points to the cwq which points to the target workqueue
and the last CPU the work item was on. __queue_delayed_work()
extracts the last CPU from delayed_work->work.data and then combines
it with the target workqueue to create new work.data.
The only thing this rather ugly hack achieves is encoding the target
workqueue into delayed_work->work.data without using a separate field,
which could be a trade off one can make; unfortunately, this entangles
work->data management between regular workqueue and delayed_work code
by setting cwq pointer before the work item is actually queued and
becomes a hindrance for further improvements of work->data handling.
This can be easily made sane by adding a target workqueue field to
delayed_work. While delayed_work is used widely in the kernel and
this does make it a bit larger (<5%), I think this is the right
trade-off especially given the prospect of much saner handling of
work->data which currently involves quite tricky memory barrier
dancing, and don't expect to see any measureable effect.
Add delayed_work->wq and drop the delayed_work->work.data overloading.
tj: Rewrote the description.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Currently, work_busy() first tests whether the work has a pool
associated with it and if not, considers it idle. This works fine
even for delayed_work.work queued on timer, as __queue_delayed_work()
sets cwq on delayed_work.work - a queued delayed_work always has its
cwq and thus pool associated with it.
However, we're about to update delayed_work queueing and this won't
hold. Update work_busy() such that it tests WORK_STRUCT_PENDING
before the associated pool. This doesn't make any noticeable behavior
difference now.
With work_pending() test moved, the function read a lot better with
"if (!pool)" test flipped to positive. Flip it.
While at it, lose the comment about now non-existent reentrant
workqueues.
tj: Reorganized the function and rewrote the description.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Now that workqueue has moved away from gcwqs, workqueue no longer has
the need to have a CPU identifier indicating "no cpu associated" - we
now use WORK_OFFQ_POOL_NONE instead - and most uses of WORK_CPU_NONE
are gone.
The only left usage is as the end marker for for_each_*wq*()
iterators, where the name WORK_CPU_NONE is confusing w/o actual
WORK_CPU_NONE usages. Similarly, WORK_CPU_LAST which equals
WORK_CPU_NONE no longer makes sense.
Replace both WORK_CPU_NONE and LAST with WORK_CPU_END. This patch
doesn't introduce any functional difference.
tj: s/WORK_CPU_LAST/WORK_CPU_END/ and rewrote the description.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Remove remaining references to gcwq.
* __next_gcwq_cpu() steals __next_wq_cpu() name. The original
__next_wq_cpu() became __next_cwq_cpu().
* s/for_each_gcwq_cpu/for_each_wq_cpu/
s/for_each_online_gcwq_cpu/for_each_online_wq_cpu/
* s/gcwq_mayday_timeout/pool_mayday_timeout/
* s/gcwq_unbind_fn/wq_unbind_fn/
* Drop references to gcwq in comments.
This patch doesn't introduce any functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Rename per-cpu and unbound nr_running variables such that they match
the pool variables.
This patch doesn't introduce any functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
global_cwq is now nothing but a container for per-cpu standard
worker_pools. Declare the worker pools directly as
cpu/unbound_std_worker_pools[] and remove global_cwq.
* ____cacheline_aligned_in_smp moved from global_cwq to worker_pool.
This probably would have made sense even before this change as we
want each pool to be aligned.
* get_gcwq() is replaced with std_worker_pools() which returns the
pointer to the standard pool array for a given CPU.
* __alloc_workqueue_key() updated to use get_std_worker_pool() instead
of open-coding pool determination.
This is part of an effort to remove global_cwq and make worker_pool
the top level abstraction, which in turn will help implementing worker
pools with user-specified attributes.
v2: Joonsoo pointed out that it'd better to align struct worker_pool
rather than the array so that every pool is aligned.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Joonsoo Kim <js1304@gmail.com>
The only remaining user of pool->gcwq is std_worker_pool_pri().
Reimplement it using get_gcwq() and remove worker_pool->gcwq.
This is part of an effort to remove global_cwq and make worker_pool
the top level abstraction, which in turn will help implementing worker
pools with user-specified attributes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
for_each_std_worker_pool() takes @cpu instead of @gcwq.
This is part of an effort to remove global_cwq and make worker_pool
the top level abstraction, which in turn will help implementing worker
pools with user-specified attributes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Instead of holding locks from both pools and then processing the pools
together, make freezing/thwaing per-pool - grab locks of one pool,
process it, release it and then proceed to the next pool.
While this patch changes processing order across pools, order within
each pool remains the same. As each pool is independent, this
shouldn't break anything.
This is part of an effort to remove global_cwq and make worker_pool
the top level abstraction, which in turn will help implementing worker
pools with user-specified attributes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Instead of holding locks from both pools and then processing the pools
together, make hotplug processing per-pool - grab locks of one pool,
process it, release it and then proceed to the next pool.
rebind_workers() is updated to take and process @pool instead of @gcwq
which results in a lot of de-indentation. gcwq_claim_assoc_and_lock()
and its counterpart are replaced with in-line per-pool locking.
While this patch changes processing order across pools, order within
each pool remains the same. As each pool is independent, this
shouldn't break anything.
This is part of an effort to remove global_cwq and make worker_pool
the top level abstraction, which in turn will help implementing worker
pools with user-specified attributes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Move gcwq->lock to pool->lock. The conversion is mostly
straight-forward. Things worth noting are
* In many places, this removes the need to use gcwq completely. pool
is used directly instead. get_std_worker_pool() is added to help
some of these conversions. This also leaves get_work_gcwq() without
any user. Removed.
* In hotplug and freezer paths, the pools belonging to a CPU are often
processed together. This patch makes those paths hold locks of all
pools, with highpri lock nested inside, to keep the conversion
straight-forward. These nested lockings will be removed by
following patches.
This is part of an effort to remove global_cwq and make worker_pool
the top level abstraction, which in turn will help implementing worker
pools with user-specified attributes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Move gcwq->cpu to pool->cpu. This introduces a couple places where
gcwq->pools[0].cpu is used. These will soon go away as gcwq is
further reduced.
This is part of an effort to remove global_cwq and make worker_pool
the top level abstraction, which in turn will help implementing worker
pools with user-specified attributes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
There's no functional necessity for the two pools on the same CPU to
share the busy hash table. It's also likely to be a bottleneck when
implementing pools with user-specified attributes.
This patch makes busy_hash per-pool. The conversion is mostly
straight-forward. Changes worth noting are,
* Large block of changes in rebind_workers() is moving the block
inside for_each_worker_pool() as now there are separate hash tables
for each pool. This changes the order of operations but doesn't
break anything.
* Thre for_each_worker_pool() loops in gcwq_unbind_fn() are combined
into one. This again changes the order of operaitons but doesn't
break anything.
This is part of an effort to remove global_cwq and make worker_pool
the top level abstraction, which in turn will help implementing worker
pools with user-specified attributes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Currently, when a work item is off-queue, work->data records the CPU
it was last on, which is used to locate the last executing instance
for non-reentrance, flushing, etc.
We're in the process of removing global_cwq and making worker_pool the
top level abstraction. This patch makes work->data point to the pool
it was last associated with instead of CPU.
After the previous WORK_OFFQ_POOL_CPU and worker_poo->id additions,
the conversion is fairly straight-forward. WORK_OFFQ constants and
functions are modified to record and read back pool ID instead.
worker_pool_by_id() is added to allow looking up pool from ID.
get_work_pool() replaces get_work_gcwq(), which is reimplemented using
get_work_pool(). get_work_pool_id() replaces work_cpu().
This patch shouldn't introduce any observable behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Add worker_pool->id which is allocated from worker_pool_idr. This
will be used to record the last associated worker_pool in work->data.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Currently, when a work item is off queue, high bits of its data
encodes the last CPU it was on. This is scheduled to be changed to
pool ID, which will make it impossible to use WORK_CPU_NONE to
indicate no association.
This patch limits the number of bits which are used for off-queue cpu
number to 31 (so that the max fits in an int) and uses the highest
possible value - WORK_OFFQ_CPU_NONE - to indicate no association.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Make GCWQ_FREEZING a pool flag POOL_FREEZING. This patch doesn't
change locking - FREEZING on both pools of a CPU are set or clear
together while holding gcwq->lock. It shouldn't cause any functional
difference.
This leaves gcwq->flags w/o any flags. Removed.
While at it, convert BUG_ON()s in freeze_workqueue_begin() and
thaw_workqueues() to WARN_ON_ONCE().
This is part of an effort to remove global_cwq and make worker_pool
the top level abstraction, which in turn will help implementing worker
pools with user-specified attributes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Make GCWQ_DISASSOCIATED a pool flag POOL_DISASSOCIATED. This patch
doesn't change locking - DISASSOCIATED on both pools of a CPU are set
or clear together while holding gcwq->lock. It shouldn't cause any
functional difference.
This is part of an effort to remove global_cwq and make worker_pool
the top level abstraction, which in turn will help implementing worker
pools with user-specified attributes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
There are currently two worker pools per cpu (including the unbound
cpu) and they are the only pools in use. New class of pools are
scheduled to be added and some pool related APIs will be added
inbetween. Call the existing pools the standard pools and prefix them
with std_. Do this early so that new APIs can use std_ prefix from
the beginning.
This patch doesn't introduce any functional difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
This function no longer has any external users. Unexport it. It will
be removed later on.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
This will be used to implement an inline function to query whether
%current is a workqueue worker and, if so, allow determining which
work item it's executing.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Workqueue wants to expose more interface internal to kernel/. Instead
of adding a new header file, repurpose kernel/workqueue_sched.h.
Rename it to workqueue_internal.h and add include protector.
This patch doesn't introduce any functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
PF_WQ_WORKER is used to tell scheduler that the task is a workqueue
worker and needs wq_worker_sleeping/waking_up() invoked on it for
concurrency management. As rescuers never participate in concurrency
management, PF_WQ_WORKER wasn't set on them.
There's a need for an interface which can query whether %current is
executing a work item and if so which. Such interface requires a way
to identify all tasks which may execute work items and PF_WQ_WORKER
will be used for that. As all normal workers always have PF_WQ_WORKER
set, we only need to add it to rescuers.
As rescuers start with WORKER_PREP but never clear it, it's always
NOT_RUNNING and there's no need to worry about it interfering with
concurrency management even if PF_WQ_WORKER is set; however, unlike
normal workers, rescuers currently don't have its worker struct as
kthread_data(). It uses the associated workqueue_struct instead.
This is problematic as wq_worker_sleeping/waking_up() expect struct
worker at kthread_data().
This patch adds worker->rescue_wq and start rescuer kthreads with
worker struct as kthread_data and sets PF_WQ_WORKER on rescuers.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
42f8570f43 ("workqueue: use new hashtable implementation") incorrectly
made busy workers hashed by the pointer value of worker instead of
work. This broke find_worker_executing_work() which in turn broke a
lot of fundamental operations of workqueue - non-reentrancy and
flushing among others. The flush malfunction triggered warning in
disk event code in Fengguang's automated test.
write_dev_root_ (3265) used greatest stack depth: 2704 bytes left
------------[ cut here ]------------
WARNING: at /c/kernel-tests/src/stable/block/genhd.c:1574 disk_clear_events+0x\
cf/0x108()
Hardware name: Bochs
Modules linked in:
Pid: 3328, comm: ata_id Not tainted 3.7.0-01930-gbff6343 #1167
Call Trace:
[<ffffffff810997c4>] warn_slowpath_common+0x83/0x9c
[<ffffffff810997f7>] warn_slowpath_null+0x1a/0x1c
[<ffffffff816aea77>] disk_clear_events+0xcf/0x108
[<ffffffff811bd8be>] check_disk_change+0x27/0x59
[<ffffffff822e48e2>] cdrom_open+0x49/0x68b
[<ffffffff81ab0291>] idecd_open+0x88/0xb7
[<ffffffff811be58f>] __blkdev_get+0x102/0x3ec
[<ffffffff811bea08>] blkdev_get+0x18f/0x30f
[<ffffffff811bebfd>] blkdev_open+0x75/0x80
[<ffffffff8118f510>] do_dentry_open+0x1ea/0x295
[<ffffffff8118f5f0>] finish_open+0x35/0x41
[<ffffffff8119c720>] do_last+0x878/0xa25
[<ffffffff8119c993>] path_openat+0xc6/0x333
[<ffffffff8119cf37>] do_filp_open+0x38/0x86
[<ffffffff81190170>] do_sys_open+0x6c/0xf9
[<ffffffff8119021e>] sys_open+0x21/0x23
[<ffffffff82c1c3d9>] system_call_fastpath+0x16/0x1b
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
To avoid executing the same work item concurrenlty, workqueue hashes
currently busy workers according to their current work items and looks
up the the table when it wants to execute a new work item. If there
already is a worker which is executing the new work item, the new item
is queued to the found worker so that it gets executed only after the
current execution finishes.
Unfortunately, a work item may be freed while being executed and thus
recycled for different purposes. If it gets recycled for a different
work item and queued while the previous execution is still in
progress, workqueue may make the new work item wait for the old one
although the two aren't really related in any way.
In extreme cases, this false dependency may lead to deadlock although
it's extremely unlikely given that there aren't too many self-freeing
work item users and they usually don't wait for other work items.
To alleviate the problem, record the current work function in each
busy worker and match it together with the work item address in
find_worker_executing_work(). While this isn't complete, it ensures
that unrelated work items don't interact with each other and in the
very unlikely case where a twisted wq user triggers it, it's always
onto itself making the culprit easy to spot.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Andrey Isakov <andy51@gmx.ru>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=51701
Cc: stable@vger.kernel.org
Switch workqueues to use the new hashtable implementation. This reduces the
amount of generic unrelated code in the workqueues.
This patch depends on d9b482c ("hashtable: introduce a small and naive
hashtable") which was merged in v3.6.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Pull workqueue changes from Tejun Heo:
"Nothing exciting. Just two trivial changes."
* 'for-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: add WARN_ON_ONCE() on CPU number to wq_worker_waking_up()
workqueue: trivial fix for return statement in work_busy()
8852aac25e ("workqueue: mod_delayed_work_on() shouldn't queue timer on
0 delay") unexpectedly uncovered a very nasty abuse of delayed_work in
megaraid - it allocated work_struct, casted it to delayed_work and
then pass that into queue_delayed_work().
Previously, this was okay because 0 @delay short-circuited to
queue_work() before doing anything with delayed_work. 8852aac25e
moved 0 @delay test into __queue_delayed_work() after sanity check on
delayed_work making megaraid trigger BUG_ON().
Although megaraid is already fixed by c1d390d8e6 ("megaraid: fix
BUG_ON() from incorrect use of delayed work"), this patch converts
BUG_ON()s in __queue_delayed_work() to WARN_ON_ONCE()s so that such
abusers, if there are more, trigger warning but don't crash the
machine.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Xiaotian Feng <xtfeng@gmail.com>
Recently, workqueue code has gone through some changes and we found
some bugs related to concurrency management operations happening on
the wrong CPU. When a worker is concurrency managed
(!WORKER_NOT_RUNNIG), it should be bound to its associated cpu and
woken up to that cpu. Add WARN_ON_ONCE() to verify this.
Signed-off-by: Joonsoo Kim <js1304@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Return type of work_busy() is unsigned int.
There is return statement returning boolean value, 'false' in work_busy().
It is not problem, because 'false' may be treated '0'.
However, fixing it would make code robust.
Signed-off-by: Joonsoo Kim <js1304@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
8376fe22c7 ("workqueue: implement mod_delayed_work[_on]()")
implemented mod_delayed_work[_on]() using the improved
try_to_grab_pending(). The function is later used, among others, to
replace [__]candel_delayed_work() + queue_delayed_work() combinations.
Unfortunately, a delayed_work item w/ zero @delay is handled slightly
differently by mod_delayed_work_on() compared to
queue_delayed_work_on(). The latter skips timer altogether and
directly queues it using queue_work_on() while the former schedules
timer which will expire on the closest tick. This means, when @delay
is zero, that [__]cancel_delayed_work() + queue_delayed_work_on()
makes the target item immediately executable while
mod_delayed_work_on() may induce delay of upto a full tick.
This somewhat subtle difference breaks some of the converted users.
e.g. block queue plugging uses delayed_work for deferred processing
and uses mod_delayed_work_on() when the queue needs to be immediately
unplugged. The above problem manifested as noticeably higher number
of context switches under certain circumstances.
The difference in behavior was caused by missing special case handling
for 0 delay in mod_delayed_work_on() compared to
queue_delayed_work_on(). Joonsoo Kim posted a patch to add it -
("workqueue: optimize mod_delayed_work_on() when @delay == 0")[1].
The patch was queued for 3.8 but it was described as optimization and
I missed that it was a correctness issue.
As both queue_delayed_work_on() and mod_delayed_work_on() use
__queue_delayed_work() for queueing, it seems that the better approach
is to move the 0 delay special handling to the function instead of
duplicating it in mod_delayed_work_on().
Fix the problem by moving 0 delay special case handling from
queue_delayed_work_on() to __queue_delayed_work(). This replaces
Joonsoo's patch.
[1] http://thread.gmane.org/gmane.linux.kernel/1379011/focus=1379012
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-and-tested-by: Anders Kaseorg <andersk@MIT.EDU>
Reported-and-tested-by: Zlatko Calusic <zlatko.calusic@iskon.hr>
LKML-Reference: <alpine.DEB.2.00.1211280953350.26602@dr-wily.mit.edu>
LKML-Reference: <50A78AA9.5040904@iskon.hr>
Cc: Joonsoo Kim <js1304@gmail.com>
A rescue thread exiting TASK_INTERRUPTIBLE can lead to a task scheduling
off, never to be seen again. In the case where this occurred, an exiting
thread hit reiserfs homebrew conditional resched while holding a mutex,
bringing the box to its knees.
PID: 18105 TASK: ffff8807fd412180 CPU: 5 COMMAND: "kdmflush"
#0 [ffff8808157e7670] schedule at ffffffff8143f489
#1 [ffff8808157e77b8] reiserfs_get_block at ffffffffa038ab2d [reiserfs]
#2 [ffff8808157e79a8] __block_write_begin at ffffffff8117fb14
#3 [ffff8808157e7a98] reiserfs_write_begin at ffffffffa0388695 [reiserfs]
#4 [ffff8808157e7ad8] generic_perform_write at ffffffff810ee9e2
#5 [ffff8808157e7b58] generic_file_buffered_write at ffffffff810eeb41
#6 [ffff8808157e7ba8] __generic_file_aio_write at ffffffff810f1a3a
#7 [ffff8808157e7c58] generic_file_aio_write at ffffffff810f1c88
#8 [ffff8808157e7cc8] do_sync_write at ffffffff8114f850
#9 [ffff8808157e7dd8] do_acct_process at ffffffff810a268f
[exception RIP: kernel_thread_helper]
RIP: ffffffff8144a5c0 RSP: ffff8808157e7f58 RFLAGS: 00000202
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff8107af60 RDI: ffff8803ee491d18
RBP: 0000000000000000 R8: 0000000000000000 R9: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
Signed-off-by: Mike Galbraith <mgalbraith@suse.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
57b30ae77b ("workqueue: reimplement cancel_delayed_work() using
try_to_grab_pending()") made cancel_delayed_work() always return %true
unless someone else is also trying to cancel the work item, which is
broken - if the target work item is idle, the return value should be
%false.
try_to_grab_pending() indicates that the target work item was idle by
zero return value. Use it for return. Note that this brings
cancel_delayed_work() in line with __cancel_work_timer() in return
value handling.
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
LKML-Reference: <444a6439-b1a4-4740-9e7e-bc37267cfe73@default>
Pull workqueue changes from Tejun Heo:
"This is workqueue updates for v3.7-rc1. A lot of activities this
round including considerable API and behavior cleanups.
* delayed_work combines a timer and a work item. The handling of the
timer part has always been a bit clunky leading to confusing
cancelation API with weird corner-case behaviors. delayed_work is
updated to use new IRQ safe timer and cancelation now works as
expected.
* Another deficiency of delayed_work was lack of the counterpart of
mod_timer() which led to cancel+queue combinations or open-coded
timer+work usages. mod_delayed_work[_on]() are added.
These two delayed_work changes make delayed_work provide interface
and behave like timer which is executed with process context.
* A work item could be executed concurrently on multiple CPUs, which
is rather unintuitive and made flush_work() behavior confusing and
half-broken under certain circumstances. This problem doesn't
exist for non-reentrant workqueues. While non-reentrancy check
isn't free, the overhead is incurred only when a work item bounces
across different CPUs and even in simulated pathological scenario
the overhead isn't too high.
All workqueues are made non-reentrant. This removes the
distinction between flush_[delayed_]work() and
flush_[delayed_]_work_sync(). The former is now as strong as the
latter and the specified work item is guaranteed to have finished
execution of any previous queueing on return.
* In addition to the various bug fixes, Lai redid and simplified CPU
hotplug handling significantly.
* Joonsoo introduced system_highpri_wq and used it during CPU
hotplug.
There are two merge commits - one to pull in IRQ safe timer from
tip/timers/core and the other to pull in CPU hotplug fixes from
wq/for-3.6-fixes as Lai's hotplug restructuring depended on them."
Fixed a number of trivial conflicts, but the more interesting conflicts
were silent ones where the deprecated interfaces had been used by new
code in the merge window, and thus didn't cause any real data conflicts.
Tejun pointed out a few of them, I fixed a couple more.
* 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (46 commits)
workqueue: remove spurious WARN_ON_ONCE(in_irq()) from try_to_grab_pending()
workqueue: use cwq_set_max_active() helper for workqueue_set_max_active()
workqueue: introduce cwq_set_max_active() helper for thaw_workqueues()
workqueue: remove @delayed from cwq_dec_nr_in_flight()
workqueue: fix possible stall on try_to_grab_pending() of a delayed work item
workqueue: use hotcpu_notifier() for workqueue_cpu_down_callback()
workqueue: use __cpuinit instead of __devinit for cpu callbacks
workqueue: rename manager_mutex to assoc_mutex
workqueue: WORKER_REBIND is no longer necessary for idle rebinding
workqueue: WORKER_REBIND is no longer necessary for busy rebinding
workqueue: reimplement idle worker rebinding
workqueue: deprecate __cancel_delayed_work()
workqueue: reimplement cancel_delayed_work() using try_to_grab_pending()
workqueue: use mod_delayed_work() instead of __cancel + queue
workqueue: use irqsafe timer for delayed_work
workqueue: clean up delayed_work initializers and add missing one
workqueue: make deferrable delayed_work initializer names consistent
workqueue: cosmetic whitespace updates for macro definitions
workqueue: deprecate system_nrt[_freezable]_wq
workqueue: deprecate flush[_delayed]_work_sync()
...
e0aecdd874 ("workqueue: use irqsafe timer for delayed_work") made
try_to_grab_pending() safe to use from irq context but forgot to
remove WARN_ON_ONCE(in_irq()). Remove it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
workqueue_set_max_active() may increase ->max_active without
activating delayed works and may make the activation order differ from
the queueing order. Both aren't strictly bugs but the resulting
behavior could be a bit odd.
To make things more consistent, use cwq_set_max_active() helper which
immediately makes use of the newly increased max_mactive if there are
delayed work items and also keeps the activation order.
tj: Slight update to description.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Using a helper instead of open code makes thaw_workqueues() clearer.
The helper will also be used by the next patch.
tj: Slight update to comment and description.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The existing work_on_cpu() implementation is hugely inefficient. It
creates a new kthread, execute that single function and then let the
kthread die on each invocation.
Now that system_wq can handle concurrent executions, there's no
advantage of doing this. Reimplement work_on_cpu() using system_wq
which makes it simpler and way more efficient.
stable: While this isn't a fix in itself, it's needed to fix a
workqueue related bug in cpufreq/powernow-k8. AFAICS, this
shouldn't break other existing users.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: stable@vger.kernel.org
@delayed is now always false for all callers, remove it.
tj: Updated description.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Currently, when try_to_grab_pending() grabs a delayed work item, it
leaves its linked work items alone on the delayed_works. The linked
work items are always NO_COLOR and will cause future
cwq_activate_first_delayed() increase cwq->nr_active incorrectly, and
may cause the whole cwq to stall. For example,
state: cwq->max_active = 1, cwq->nr_active = 1
one work in cwq->pool, many in cwq->delayed_works.
step1: try_to_grab_pending() removes a work item from delayed_works
but leaves its NO_COLOR linked work items on it.
step2: Later on, cwq_activate_first_delayed() activates the linked
work item increasing ->nr_active.
step3: cwq->nr_active = 1, but all activated work items of the cwq are
NO_COLOR. When they finish, cwq->nr_active will not be
decreased due to NO_COLOR, and no further work items will be
activated from cwq->delayed_works. the cwq stalls.
Fix it by ensuring the target work item is activated before stealing
PENDING in try_to_grab_pending(). This ensures that all the linked
work items are activated without incorrectly bumping cwq->nr_active.
tj: Updated comment and description.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@kernel.org
workqueue_cpu_down_callback() is used only if HOTPLUG_CPU=y, so
hotcpu_notifier() fits better than cpu_notifier().
When HOTPLUG_CPU=y, hotcpu_notifier() and cpu_notifier() are the same.
When HOTPLUG_CPU=n, if we use cpu_notifier(),
workqueue_cpu_down_callback() will be called during boot to do
nothing, and the memory of workqueue_cpu_down_callback() and
gcwq_unbind_fn() will be discarded after boot.
If we use hotcpu_notifier(), we can avoid the no-op call of
workqueue_cpu_down_callback() and the memory of
workqueue_cpu_down_callback() and gcwq_unbind_fn() will be discard at
build time:
$ ls -l kernel/workqueue.o.cpu_notifier kernel/workqueue.o.hotcpu_notifier
-rw-rw-r-- 1 laijs laijs 484080 Sep 15 11:31 kernel/workqueue.o.cpu_notifier
-rw-rw-r-- 1 laijs laijs 478240 Sep 15 11:31 kernel/workqueue.o.hotcpu_notifier
$ size kernel/workqueue.o.cpu_notifier kernel/workqueue.o.hotcpu_notifier
text data bss dec hex filename
18513 2387 1221 22121 5669 kernel/workqueue.o.cpu_notifier
18082 2355 1221 21658 549a kernel/workqueue.o.hotcpu_notifier
tj: Updated description.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
For workqueue hotplug callbacks, it makes less sense to use __devinit
which discards the memory after boot if !HOTPLUG. __cpuinit, which
discards the memory after boot if !HOTPLUG_CPU fits better.
tj: Updated description.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Now that manager_mutex's role has changed from synchronizing manager
role to excluding hotplug against manager, the name is misleading.
As it is protecting the CPU-association of the gcwq now, rename it to
assoc_mutex.
This patch is pure rename and doesn't introduce any functional change.
tj: Updated comments and description.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Now both worker destruction and idle rebinding remove the worker from
idle list while it's still idle, so list_empty(&worker->entry) can be
used to test whether either is pending and WORKER_DIE to distinguish
between the two instead making WORKER_REBIND unnecessary.
Use list_empty(&worker->entry) to determine whether destruction or
rebinding is pending. This simplifies worker state transitions.
WORKER_REBIND is not needed anymore. Remove it.
tj: Updated comments and description.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Because the old unbind/rebinding implementation wasn't atomic w.r.t.
GCWQ_DISASSOCIATED manipulation which is protected by
global_cwq->lock, we had to use two flags, WORKER_UNBOUND and
WORKER_REBIND, to avoid incorrectly losing all NOT_RUNNING bits with
back-to-back CPU hotplug operations; otherwise, completion of
rebinding while another unbinding is in progress could clear UNBIND
prematurely.
Now that both unbind/rebinding are atomic w.r.t. GCWQ_DISASSOCIATED,
there's no need to use two flags. Just one is enough. Don't use
WORKER_REBIND for busy rebinding.
tj: Updated description.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Currently rebind_workers() uses rebinds idle workers synchronously
before proceeding to requesting busy workers to rebind. This is
necessary because all workers on @worker_pool->idle_list must be bound
before concurrency management local wake-ups from the busy workers
take place.
Unfortunately, the synchronous idle rebinding is quite complicated.
This patch reimplements idle rebinding to simplify the code path.
Rather than trying to make all idle workers bound before rebinding
busy workers, we simply remove all to-be-bound idle workers from the
idle list and let them add themselves back after completing rebinding
(successful or not).
As only workers which finished rebinding can on on the idle worker
list, the idle worker list is guaranteed to have only bound workers
unless CPU went down again and local wake-ups are safe.
After the change, @worker_pool->nr_idle may deviate than the actual
number of idle workers on @worker_pool->idle_list. More specifically,
nr_idle may be non-zero while ->idle_list is empty. All users of
->nr_idle and ->idle_list are audited. The only affected one is
too_many_workers() which is updated to check %false if ->idle_list is
empty regardless of ->nr_idle.
After this patch, rebind_workers() no longer performs the nasty
idle-rebind retries which require temporary release of gcwq->lock, and
both unbinding and rebinding are atomic w.r.t. global_cwq->lock.
worker->idle_rebind and global_cwq->rebind_hold are now unnecessary
and removed along with the definition of struct idle_rebind.
Changed from V1:
1) remove unlikely from too_many_workers(), ->idle_list can be empty
anytime, even before this patch, no reason to use unlikely.
2) fix a small rebasing mistake.
(which is from rebasing the orignal fixing patch to for-next)
3) add a lot of comments.
4) clear WORKER_REBIND unconditionaly in idle_worker_rebind()
tj: Updated comments and description.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
This merge is necessary as Lai's CPU hotplug restructuring series
depends on the CPU hotplug bug fixes in for-3.6-fixes.
The merge creates one trivial conflict between the following two
commits.
96e65306b8 "workqueue: UNBOUND -> REBIND morphing in rebind_workers() should be atomic"
e2b6a6d570 "workqueue: use system_highpri_wq for highpri workers in rebind_workers()"
Both add local variable definitions to the same block and can be
merged in any order.
Signed-off-by: Tejun Heo <tj@kernel.org>
To simplify both normal and CPU hotplug paths, worker management is
prevented while CPU hoplug is in progress. This is achieved by CPU
hotplug holding the same exclusion mechanism used by workers to ensure
there's only one manager per pool.
If someone else seems to be performing the manager role, workers
proceed to execute work items. CPU hotplug using the same mechanism
can lead to idle worker depletion because all workers could proceed to
execute work items while CPU hotplug is in progress and CPU hotplug
itself wouldn't actually perform the worker management duty - it
doesn't guarantee that there's an idle worker left when it releases
management.
This idle worker depletion, under extreme circumstances, can break
forward-progress guarantee and thus lead to deadlock.
This patch fixes the bug by using separate mechanisms for manager
exclusion among workers and hotplug exclusion. For manager exclusion,
POOL_MANAGING_WORKERS which was restored by the previous patch is
used. pool->manager_mutex is now only used for exclusion between the
elected manager and CPU hotplug. The elected manager won't proceed
without holding pool->manager_mutex.
This ensures that the worker which won the manager position can't skip
managing while CPU hotplug is in progress. It will block on
manager_mutex and perform management after CPU hotplug is complete.
Note that hotplug may happen while waiting for manager_mutex. A
manager isn't either on idle or busy list and thus the hoplug code
can't unbind/rebind it. Make the manager handle its own un/rebinding.
tj: Updated comment and description.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
This patch restores POOL_MANAGING_WORKERS which was replaced by
pool->manager_mutex by 6037315269 "workqueue: use mutex for global_cwq
manager exclusion".
There's a subtle idle worker depletion bug across CPU hotplug events
and we need to distinguish an actual manager and CPU hotplug
preventing management. POOL_MANAGING_WORKERS will be used for the
former and manager_mutex the later.
This patch just lays POOL_MANAGING_WORKERS on top of the existing
manager_mutex and doesn't introduce any synchronization changes. The
next patch will update it.
Note that this patch fixes a non-critical anomaly where
too_many_workers() may return %true spuriously while CPU hotplug is in
progress. While the issue could schedule idle timer spuriously, it
didn't trigger any actual misbehavior.
tj: Rewrote patch description.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Currently, rebind_workers() and idle_worker_rebind() are two-way
interlocked. rebind_workers() waits for idle workers to finish
rebinding and rebound idle workers wait for rebind_workers() to finish
rebinding busy workers before proceeding.
Unfortunately, this isn't enough. The second wait from idle workers
is implemented as follows.
wait_event(gcwq->rebind_hold, !(worker->flags & WORKER_REBIND));
rebind_workers() clears WORKER_REBIND, wakes up the idle workers and
then returns. If CPU hotplug cycle happens again before one of the
idle workers finishes the above wait_event(), rebind_workers() will
repeat the first part of the handshake - set WORKER_REBIND again and
wait for the idle worker to finish rebinding - and this leads to
deadlock because the idle worker would be waiting for WORKER_REBIND to
clear.
This is fixed by adding another interlocking step at the end -
rebind_workers() now waits for all the idle workers to finish the
above WORKER_REBIND wait before returning. This ensures that all
rebinding steps are complete on all idle workers before the next
hotplug cycle can happen.
This problem was diagnosed by Lai Jiangshan who also posted a patch to
fix the issue, upon which this patch is based.
This is the minimal fix and further patches are scheduled for the next
merge window to simplify the CPU hotplug path.
Signed-off-by: Tejun Heo <tj@kernel.org>
Original-patch-by: Lai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <1346516916-1991-3-git-send-email-laijs@cn.fujitsu.com>
This doesn't make any functional difference and is purely to help the
next patch to be simpler.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
The compiler may compile the following code into TWO write/modify
instructions.
worker->flags &= ~WORKER_UNBOUND;
worker->flags |= WORKER_REBIND;
so the other CPU may temporarily see worker->flags which doesn't have
either WORKER_UNBOUND or WORKER_REBIND set and perform local wakeup
prematurely.
Fix it by using single explicit assignment via ACCESS_ONCE().
Because idle workers have another WORKER_NOT_RUNNING flag, this bug
doesn't exist for them; however, update it to use the same pattern for
consistency.
tj: Applied the change to idle workers too and updated comments and
patch description a bit.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
cancel_delayed_work() can't be called from IRQ handlers due to its use
of del_timer_sync() and can't cancel work items which are already
transferred from timer to worklist.
Also, unlike other flush and cancel functions, a canceled delayed_work
would still point to the last associated cpu_workqueue. If the
workqueue is destroyed afterwards and the work item is re-used on a
different workqueue, the queueing code can oops trying to dereference
already freed cpu_workqueue.
This patch reimplements cancel_delayed_work() using
try_to_grab_pending() and set_work_cpu_and_clear_pending(). This
allows the function to be called from IRQ handlers and makes its
behavior consistent with other flush / cancel functions.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Up to now, for delayed_works, try_to_grab_pending() couldn't be used
from IRQ handlers because IRQs may happen while
delayed_work_timer_fn() is in progress leading to indefinite -EAGAIN.
This patch makes delayed_work use the new TIMER_IRQSAFE flag for
delayed_work->timer. This makes try_to_grab_pending() and thus
mod_delayed_work_on() safe to call from IRQ handlers.
Signed-off-by: Tejun Heo <tj@kernel.org>
Now that all workqueues are non-reentrant, system[_freezable]_wq() are
equivalent to system_nrt[_freezable]_wq(). Replace the latter with
wrappers around system[_freezable]_wq(). The wrapping goes through
inline functions so that __deprecated can be added easily.
Signed-off-by: Tejun Heo <tj@kernel.org>
Now that all workqueues are non-reentrant, flush[_delayed]_work_sync()
are equivalent to flush[_delayed]_work(). Drop the separate
implementation and make them thin wrappers around
flush[_delayed]_work().
* start_flush_work() no longer takes @wait_executing as the only left
user - flush_work() - always sets it to %true.
* __cancel_work_timer() uses flush_work() instead of wait_on_work().
Signed-off-by: Tejun Heo <tj@kernel.org>
By default, each per-cpu part of a bound workqueue operates separately
and a work item may be executing concurrently on different CPUs. The
behavior avoids some cross-cpu traffic but leads to subtle weirdities
and not-so-subtle contortions in the API.
* There's no sane usefulness in allowing a single work item to be
executed concurrently on multiple CPUs. People just get the
behavior unintentionally and get surprised after learning about it.
Most either explicitly synchronize or use non-reentrant/ordered
workqueue but this is error-prone.
* flush_work() can't wait for multiple instances of the same work item
on different CPUs. If a work item is executing on cpu0 and then
queued on cpu1, flush_work() can only wait for the one on cpu1.
Unfortunately, work items can easily cross CPU boundaries
unintentionally when the queueing thread gets migrated. This means
that if multiple queuers compete, flush_work() can't even guarantee
that the instance queued right before it is finished before
returning.
* flush_work_sync() was added to work around some of the deficiencies
of flush_work(). In addition to the usual flushing, it ensures that
all currently executing instances are finished before returning.
This operation is expensive as it has to walk all CPUs and at the
same time fails to address competing queuer case.
Incorrectly using flush_work() when flush_work_sync() is necessary
is an easy error to make and can lead to bugs which are difficult to
reproduce.
* Similar problems exist for flush_delayed_work[_sync]().
Other than the cross-cpu access concern, there's no benefit in
allowing parallel execution and it's plain silly to have this level of
contortion for workqueue which is widely used from core code to
extremely obscure drivers.
This patch makes all workqueues non-reentrant. If a work item is
executing on a different CPU when queueing is requested, it is always
queued to that CPU. This guarantees that any given work item can be
executing on one CPU at maximum and if a work item is queued and
executing, both are on the same CPU.
The only behavior change which may affect workqueue users negatively
is that non-reentrancy overrides the affinity specified by
queue_work_on(). On a reentrant workqueue, the affinity specified by
queue_work_on() is always followed. Now, if the work item is
executing on one of the CPUs, the work item will be queued there
regardless of the requested affinity. I've reviewed all workqueue
users which request explicit affinity, and, fortunately, none seems to
be crazy enough to exploit parallel execution of the same work item.
This adds an additional busy_hash lookup if the work item was
previously queued on a different CPU. This shouldn't be noticeable
under any sane workload. Work item queueing isn't a very
high-frequency operation and they don't jump across CPUs all the time.
In a micro benchmark to exaggerate this difference - measuring the
time it takes for two work items to repeatedly jump between two CPUs a
number (10M) of times with busy_hash table densely populated, the
difference was around 3%.
While the overhead is measureable, it is only visible in pathological
cases and the difference isn't huge. This change brings much needed
sanity to workqueue and makes its behavior consistent with timer. I
think this is the right tradeoff to make.
This enables significant simplification of workqueue API.
Simplification patches will follow.
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixed some checkpatch warnings.
tj: adapted to wq/for-3.7 and massaged pr_xxx() format strings a bit.
Signed-off-by: Valentin Ilie <valentin.ilie@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
LKML-Reference: <1345326762-21747-1-git-send-email-valentin.ilie@gmail.com>
To speed cpu down processing up, use system_highpri_wq.
As scheduling priority of workers on it is higher than system_wq and
it is not contended by other normal works on this cpu, work on it
is processed faster than system_wq.
tj: CPU up/downs care quite a bit about latency these days. This
shouldn't hurt anything and makes sense.
Signed-off-by: Joonsoo Kim <js1304@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
In rebind_workers(), we do inserting a work to rebind to cpu for busy workers.
Currently, in this case, we use only system_wq. This makes a possible
error situation as there is mismatch between cwq->pool and worker->pool.
To prevent this, we should use system_highpri_wq for highpri worker
to match theses. This implements it.
tj: Rephrased comment a bit.
Signed-off-by: Joonsoo Kim <js1304@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Commit 3270476a6c ('workqueue: reimplement
WQ_HIGHPRI using a separate worker_pool') introduce separate worker pool
for HIGHPRI. When we handle busyworkers for gcwq, it can be normal worker
or highpri worker. But, we don't consider this difference in rebind_workers(),
we use just system_wq for highpri worker. It makes mismatch between
cwq->pool and worker->pool.
It doesn't make error in current implementation, but possible in the future.
Now, we introduce system_highpri_wq to use proper cwq for highpri workers
in rebind_workers(). Following patch fix this issue properly.
tj: Even apart from rebinding, having system_highpri_wq generally
makes sense.
Signed-off-by: Joonsoo Kim <js1304@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
We assign cpu id into work struct's data field in __queue_delayed_work_on().
In current implementation, when work is come in first time,
current running cpu id is assigned.
If we do __queue_delayed_work_on() with CPU A on CPU B,
__queue_work() invoked in delayed_work_timer_fn() go into
the following sub-optimal path in case of WQ_NON_REENTRANT.
gcwq = get_gcwq(cpu);
if (wq->flags & WQ_NON_REENTRANT &&
(last_gcwq = get_work_gcwq(work)) && last_gcwq != gcwq) {
Change lcpu to @cpu and rechange lcpu to local cpu if lcpu is WORK_CPU_UNBOUND.
It is sufficient to prevent to go into sub-optimal path.
tj: Slightly rephrased the comment.
Signed-off-by: Joonsoo Kim <js1304@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
