Commit Graph

2463 Commits

Author SHA1 Message Date
Linus Torvalds
52d589a01d Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma
Pull slave-dmaengine updates from Vinod Koul:
 "For dmaengine contributions we have:
   - designware cleanup by Andy
   - my series moving device_control users to dmanegine_xxx APIs for
     later removal of device_control API
   - minor fixes spread over drivers mainly mv_xor, pl330, mmp, imx-sdma
     etc"

* 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (60 commits)
  serial: atmel: add missing dmaengine header
  dmaengine: remove FSLDMA_EXTERNAL_START
  dmaengine: freescale: remove FSLDMA_EXTERNAL_START control method
  carma-fpga: move to fsl_dma_external_start()
  carma-fpga: use dmaengine_xxx() API
  dmaengine: freescale: add and export fsl_dma_external_start()
  dmaengine: add dmaengine_prep_dma_sg() helper
  video: mx3fb: use dmaengine_terminate_all() API
  serial: sh-sci: use dmaengine_terminate_all() API
  net: ks8842: use dmaengine_terminate_all() API
  mtd: sh_flctl: use dmaengine_terminate_all() API
  mtd: fsmc_nand: use dmaengine_terminate_all() API
  V4L2: mx3_camer: use dmaengine_pause() API
  dmaengine: coh901318: use dmaengine_terminate_all() API
  pata_arasan_cf: use dmaengine_terminate_all() API
  dmaengine: edma: check for echan->edesc => NULL in edma_dma_pause()
  dmaengine: dw: export probe()/remove() and Co to users
  dmaengine: dw: enable and disable controller when needed
  dmaengine: dw: always export dw_dma_{en,dis}able
  dmaengine: dw: introduce dw_dma_on() helper
  ...
2014-10-18 18:11:04 -07:00
Linus Torvalds
b528392669 ACPI and power management updates for 3.18-rc1
- Rework the handling of wakeup IRQs by the IRQ core such that
    all of them will be switched over to "wakeup" mode in
    suspend_device_irqs() and in that mode the first interrupt
    will abort system suspend in progress or wake up the system
    if already in suspend-to-idle (or equivalent) without executing
    any interrupt handlers.  Among other things that eliminates the
    wakeup-related motivation to use the IRQF_NO_SUSPEND interrupt
    flag with interrupts which don't really need it and should not
    use it (Thomas Gleixner and Rafael J Wysocki).
 
  - Switch over ACPI to handling wakeup interrupts with the help
    of the new mechanism introduced by the above IRQ core rework
    (Rafael J Wysocki).
 
  - Rework the core generic PM domains code to eliminate code that's
    not used, add DT support and add a generic mechanism by which
    devices can be added to PM domains automatically during
    enumeration (Ulf Hansson, Geert Uytterhoeven and Tomasz Figa).
 
  - Add debugfs-based mechanics for debugging generic PM domains
    (Maciej Matraszek).
 
  - ACPICA update to upstream version 20140828.  Included are updates
    related to the SRAT and GTDT tables and the _PSx methods are in
    the METHOD_NAME list now (Bob Moore and Hanjun Guo).
 
  - Add _OSI("Darwin") support to the ACPI core (unfortunately, that
    can't really be done in a straightforward way) to prevent
    Thunderbolt from being turned off on Apple systems after boot
    (or after resume from system suspend) and rework the ACPI Smart
    Battery Subsystem (SBS) driver to work correctly with Apple
    platforms (Matthew Garrett and Andreas Noever).
 
  - ACPI LPSS (Low-Power Subsystem) driver update cleaning up the
    code, adding support for 133MHz I2C source clock on Intel Baytrail
    to it and making it avoid using UART RTS override with Auto Flow
    Control (Heikki Krogerus).
 
  - ACPI backlight updates removing the video_set_use_native_backlight
    quirk which is not necessary any more, making the code check the
    list of output devices returned by the _DOD method to avoid
    creating acpi_video interfaces that won't work and adding a quirk
    for Lenovo Ideapad Z570 (Hans de Goede, Aaron Lu and Stepan Bujnak).
 
  - New Win8 ACPI OSI quirks for some Dell laptops (Edward Lin).
 
  - Assorted ACPI code cleanups (Fabian Frederick, Rasmus Villemoes,
    Sudip Mukherjee, Yijing Wang, and Zhang Rui).
 
  - cpufreq core updates and cleanups (Viresh Kumar, Preeti U Murthy,
    Rasmus Villemoes).
 
  - cpufreq driver updates: cpufreq-cpu0/cpufreq-dt (driver name
    change among other things), ppc-corenet, powernv (Viresh Kumar,
    Preeti U Murthy, Shilpasri G Bhat, Lucas Stach).
 
  - cpuidle support for DT-based idle states infrastructure, new
    ARM64 cpuidle driver, cpuidle core cleanups (Lorenzo Pieralisi,
    Rasmus Villemoes).
 
  - ARM big.LITTLE cpuidle driver updates: support for DT-based
    initialization and Exynos5800 compatible string (Lorenzo Pieralisi,
    Kevin Hilman).
 
  - Rework of the test_suspend kernel command line argument and
    a new trace event for console resume (Srinivas Pandruvada,
    Todd E Brandt).
 
  - Second attempt to optimize swsusp_free() (hibernation core) to
    make it avoid going through all PFNs which may be way too slow on
    some systems (Joerg Roedel).
 
  - devfreq updates (Paul Bolle, Punit Agrawal, Ãrjan Eide).
 
  - rockchip-io Adaptive Voltage Scaling (AVS) driver and AVS
    entry update in MAINTAINERS (Heiko Stübner, Kevin Hilman).
 
  - PM core fix related to clock management (Geert Uytterhoeven).
 
  - PM core's sysfs code cleanup (Johannes Berg).
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJUNbJoAAoJEILEb/54YlRxRp8QAJyGIPdx+f03oBir+7vvEwhY
 svxd+V9xXK0UgWNGkCvlMk/1RIVy0qqtXliUrDaE+9tcHACA9+iAxMmNmDsjLOiO
 gpazuz5kgeznrmp1eNwQnYTt+OCReQIcyCsj4q4fNo9bbETTyr2bRz226LEuZekC
 TAiKdphYoOszFBgTVg5gfu+lqjHyXjgXPnwMTlRYn1y4YL2adDIgxj9cFedykTTW
 Eu593TY2dH6ovERJ6q3qxZbRuWuxtww95J07b3t2/2Eb3e/R/zlX0/XJ/C88f/m2
 DkqngbOYqCdw+zJeN6k8631foyfUwAcTd0sJ1+5nsm5H4NE5NqObjbxOk5/yNht6
 HgvgISGHWLerEw+A/Dk6o0oZOtR1G/TAQ5qQk5nUfKT/sSoU+9/USsXtWhXwZCia
 XccnJgW6ZtPrJJP3zDnkrxe3gndmLic11QXArw2IhWTsq0sZlAyMgtauBXLdDiQa
 H/AMiYrUNmIABef1cirBLTtgXN4Zbsai9vIrxMmV7OgBrclrh52NTjzr05P5Hnl2
 fRK56mb6mP59LymI7n8fyXL8tHnbNwFvTaxuvrZmzcYbzL0l9DuPocJrrTHRSfhm
 GFfzfvLj0R66ZM4PthRSwz4H2v1FnlRcCkj5k/QjtBPlyzxtOnJveqve5umbrnb9
 T5mRmlAs4iYwLuKCVVNT
 =sIv/
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI and power management updates from Rafael Wysocki:
 "Features-wise, to me the most important this time is a rework of
  wakeup interrupts handling in the core that makes them work
  consistently across all of the available sleep states, including
  suspend-to-idle.  Many thanks to Thomas Gleixner for his help with
  this work.

  Second is an update of the generic PM domains code that has been in
  need of some care for quite a while.  Unused code is being removed, DT
  support is being added and domains are now going to be attached to
  devices in bus type code in analogy with the ACPI PM domain.  The
  majority of work here was done by Ulf Hansson who also has been the
  most active developer this time.

  Apart from this we have a traditional ACPICA update, this time to
  upstream version 20140828 and a few ACPI wakeup interrupts handling
  patches on top of the general rework mentioned above.  There also are
  several cpufreq commits including renaming the cpufreq-cpu0 driver to
  cpufreq-dt, as this is what implements generic DT-based cpufreq
  support, and a new DT-based idle states infrastructure for cpuidle.

  In addition to that, the ACPI LPSS driver is updated, ACPI support for
  Apple machines is improved, a few bugs are fixed and a few cleanups
  are made all over.

  Finally, the Adaptive Voltage Scaling (AVS) subsystem now has a tree
  maintained by Kevin Hilman that will be merged through the PM tree.

  Numbers-wise, the generic PM domains update takes the lead this time
  with 32 non-merge commits, second is cpufreq (15 commits) and the 3rd
  place goes to the wakeup interrupts handling rework (13 commits).

  Specifics:

   - Rework the handling of wakeup IRQs by the IRQ core such that all of
     them will be switched over to "wakeup" mode in suspend_device_irqs()
     and in that mode the first interrupt will abort system suspend in
     progress or wake up the system if already in suspend-to-idle (or
     equivalent) without executing any interrupt handlers.  Among other
     things that eliminates the wakeup-related motivation to use the
     IRQF_NO_SUSPEND interrupt flag with interrupts which don't really
     need it and should not use it (Thomas Gleixner and Rafael Wysocki)

   - Switch over ACPI to handling wakeup interrupts with the help of the
     new mechanism introduced by the above IRQ core rework (Rafael Wysocki)

   - Rework the core generic PM domains code to eliminate code that's
     not used, add DT support and add a generic mechanism by which
     devices can be added to PM domains automatically during enumeration
     (Ulf Hansson, Geert Uytterhoeven and Tomasz Figa).

   - Add debugfs-based mechanics for debugging generic PM domains
     (Maciej Matraszek).

   - ACPICA update to upstream version 20140828.  Included are updates
     related to the SRAT and GTDT tables and the _PSx methods are in the
     METHOD_NAME list now (Bob Moore and Hanjun Guo).

   - Add _OSI("Darwin") support to the ACPI core (unfortunately, that
     can't really be done in a straightforward way) to prevent
     Thunderbolt from being turned off on Apple systems after boot (or
     after resume from system suspend) and rework the ACPI Smart Battery
     Subsystem (SBS) driver to work correctly with Apple platforms
     (Matthew Garrett and Andreas Noever).

   - ACPI LPSS (Low-Power Subsystem) driver update cleaning up the code,
     adding support for 133MHz I2C source clock on Intel Baytrail to it
     and making it avoid using UART RTS override with Auto Flow Control
     (Heikki Krogerus).

   - ACPI backlight updates removing the video_set_use_native_backlight
     quirk which is not necessary any more, making the code check the
     list of output devices returned by the _DOD method to avoid
     creating acpi_video interfaces that won't work and adding a quirk
     for Lenovo Ideapad Z570 (Hans de Goede, Aaron Lu and Stepan Bujnak)

   - New Win8 ACPI OSI quirks for some Dell laptops (Edward Lin)

   - Assorted ACPI code cleanups (Fabian Frederick, Rasmus Villemoes,
     Sudip Mukherjee, Yijing Wang, and Zhang Rui)

   - cpufreq core updates and cleanups (Viresh Kumar, Preeti U Murthy,
     Rasmus Villemoes)

   - cpufreq driver updates: cpufreq-cpu0/cpufreq-dt (driver name change
     among other things), ppc-corenet, powernv (Viresh Kumar, Preeti U
     Murthy, Shilpasri G Bhat, Lucas Stach)

   - cpuidle support for DT-based idle states infrastructure, new ARM64
     cpuidle driver, cpuidle core cleanups (Lorenzo Pieralisi, Rasmus
     Villemoes)

   - ARM big.LITTLE cpuidle driver updates: support for DT-based
     initialization and Exynos5800 compatible string (Lorenzo Pieralisi,
     Kevin Hilman)

   - Rework of the test_suspend kernel command line argument and a new
     trace event for console resume (Srinivas Pandruvada, Todd E Brandt)

   - Second attempt to optimize swsusp_free() (hibernation core) to make
     it avoid going through all PFNs which may be way too slow on some
     systems (Joerg Roedel)

   - devfreq updates (Paul Bolle, Punit Agrawal, Ãrjan Eide).

   - rockchip-io Adaptive Voltage Scaling (AVS) driver and AVS entry
     update in MAINTAINERS (Heiko Stübner, Kevin Hilman)

   - PM core fix related to clock management (Geert Uytterhoeven)

   - PM core's sysfs code cleanup (Johannes Berg)"

* tag 'pm+acpi-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (105 commits)
  ACPI / fan: printk replacement
  PM / clk: Fix crash in clocks management code if !CONFIG_PM_RUNTIME
  PM / Domains: Rename cpu_data to cpuidle_data
  cpufreq: cpufreq-dt: fix potential double put of cpu OF node
  cpufreq: cpu0: rename driver and internals to 'cpufreq_dt'
  PM / hibernate: Iterate over set bits instead of PFNs in swsusp_free()
  cpufreq: ppc-corenet: remove duplicate update of cpu_data
  ACPI / sleep: Rework the handling of ACPI GPE wakeup from suspend-to-idle
  PM / sleep: Rename platform suspend/resume functions in suspend.c
  PM / sleep: Export dpm_suspend_late/noirq() and dpm_resume_early/noirq()
  ACPICA: Introduce acpi_enable_all_wakeup_gpes()
  ACPICA: Clear all non-wakeup GPEs in acpi_hw_enable_wakeup_gpe_block()
  ACPI / video: check _DOD list when creating backlight devices
  PM / Domains: Move dev_pm_domain_attach|detach() to pm_domain.h
  cpufreq: Replace strnicmp with strncasecmp
  cpufreq: powernv: Set the cpus to nominal frequency during reboot/kexec
  cpufreq: powernv: Set the pstate of the last hotplugged out cpu in policy->cpus to minimum
  cpufreq: Allow stop CPU callback to be used by all cpufreq drivers
  PM / devfreq: exynos: Enable building exynos PPMU as module
  PM / devfreq: Export helper functions for drivers
  ...
2014-10-09 16:07:43 -04:00
Rafael J. Wysocki
49a09c9ab0 Merge branch 'pm-domains'
* pm-domains: (32 commits)
  PM / Domains: Rename cpu_data to cpuidle_data
  PM / Domains: Move dev_pm_domain_attach|detach() to pm_domain.h
  PM / Domains: Remove legacy API for adding devices through DT
  PM / Domains: Add genpd attach/detach callbacks
  PM / Domains: add debugfs listing of struct generic_pm_domain-s
  ACPI / PM: Convert acpi_dev_pm_detach() into a static function
  ARM: exynos: Move to generic PM domain DT bindings
  amba: Add support for attach/detach of PM domains
  spi: core: Convert to dev_pm_domain_attach|detach()
  mmc: sdio: Convert to dev_pm_domain_attach|detach()
  i2c: core: Convert to dev_pm_domain_attach|detach()
  drivercore / platform: Convert to dev_pm_domain_attach|detach()
  PM / Domains: Add APIs to attach/detach a PM domain for a device
  PM / Domains: Add generic OF-based PM domain look-up
  ACPI / PM: Assign the ->detach() callback when attaching the PM domain
  PM / Domains: Add a detach callback to the struct dev_pm_domain
  PM / domains: Spelling s/domian/domain/
  PM / domains: Keep declaration of dev_power_governors together
  PM / domains: Remove default_stop_ok() API
  drivers: sh: Leave disabling of unused PM domains to genpd
  ...
2014-10-07 01:18:12 +02:00
Mark Brown
a2285b8c75 Merge remote-tracking branch 'spi/topic/xilinx' into spi-next 2014-10-03 16:33:44 +01:00
Mark Brown
bab4d751f7 Merge remote-tracking branches 'spi/topic/pl022', 'spi/topic/pxa2xx', 'spi/topic/rspi', 'spi/topic/sh-msiof' and 'spi/topic/sirf' into spi-next 2014-10-03 16:33:42 +01:00
Mark Brown
899d81b974 Merge remote-tracking branches 'spi/topic/fsl-dspi', 'spi/topic/imx', 'spi/topic/mxs', 'spi/topic/omap-100k' and 'spi/topic/orion' into spi-next 2014-10-03 16:33:41 +01:00
Mark Brown
7020d76971 Merge remote-tracking branches 'spi/topic/davinci', 'spi/topic/doc', 'spi/topic/dw' and 'spi/topic/fsl' into spi-next 2014-10-03 16:33:39 +01:00
Mark Brown
1fc8450313 Merge remote-tracking branches 'spi/topic/bcm53xx', 'spi/topic/cadence', 'spi/topic/checkpatch' and 'spi/topic/clps711x' into spi-next 2014-10-03 16:33:37 +01:00
Mark Brown
613c44798f Merge remote-tracking branch 'spi/topic/dma-dep' into spi-next 2014-10-03 16:33:37 +01:00
Mark Brown
ad71f40a83 Merge remote-tracking branch 'spi/topic/core' into spi-next 2014-10-03 16:33:37 +01:00
Mark Brown
62d02e41ea Merge remote-tracking branch 'spi/fix/rockchip' into spi-linus 2014-10-03 16:33:35 +01:00
Michael Heimpold
a44619c31c spi: spi-mxs: fix a tiny typo in a comment
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-03 10:33:57 +01:00
Andy Shevchenko
f7477c2be8 spi: dw-mid: follow new DMAengine workflow
Though intel-mid-dma does not follow a new DMA workflow (*) let's prepare SPI
DW driver for that.

(*) The client is obliged to call dma_async_issue_pending() which starts the
actual transfers. Old DMA drivers do not follow this, since requirement was
introduced in the discussion of [1].

[1] http://www.spinics.net/lists/arm-kernel/msg125987.html

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-02 17:06:26 +01:00
Andy Shevchenko
2a28529944 spi: dw-mid: convert to use DMAengine wrappers
Instead of direct dereference to dmaengine callbacks we are going to use
DMAengine wrappers.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-02 17:06:26 +01:00
Andy Shevchenko
15ee3be78b spi: dw-mid: change magic numbers to the constants
Instead of using magic numbers in the code we create a bit map definition of
the DMACR register and use it.

There is no functional change.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-02 17:06:26 +01:00
Greg Ungerer
df59fa7f4b spi: orion: support armada extended baud rates
The Armada SoC family implementation of this SPI hardware module has
extended the configuration register to allow for a wider range of SPI
clock rates. Specifically the Serial Baud Rate Pre-selection bits in the
SPI Interface Configuration Register now also use bits 6 and 7 as well.

Modify the baud rate calculation to handle these differences for the
Armada case. Potentially a baud rate can be setup using a number of
different pre-scalar and scalar combinations. This code tries all
possible pre-scalar divisors (8 in total) to try and find the most
accurate set.

This change introduces (and documents) a new device tree compatible
device name "armada-370-spi" to support this.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Reviewed-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-01 19:21:51 +01:00
Ulf Hansson
f48c767ce8 PM / Domains: Move dev_pm_domain_attach|detach() to pm_domain.h
The commit 46420dd73b (PM / Domains: Add APIs to attach/detach a PM
domain for a device) started using errno values in pm.h header file.
It also failed to include the header for these, thus it caused
compiler errors.

Instead of including the errno header to pm.h, let's move the functions
to pm_domain.h, since it's a better match.

Fixes: 46420dd73b (PM / Domains: Add APIs to attach/detach a PM domain for a device)
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-30 01:16:44 +02:00
Xiubo Li
a310836004 spi: fsl: Sort include headers alphabetically
Sort all the include headers alphabetically for the freescale
spi drivers. If the inlcude headers sorted out of order, maybe
the best logical choice is to append new ones after the exist
ones, while this may create a lot of potential for duplicates
and conflicts for each diffenent changes will add new headers
in the same location.

Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-29 18:14:08 +01:00
Axel Lin
61d38b9a82 spi: bcm53xx: Add missing module information
Mainly to fix missing MODULE_LICENSE.
Also add MODULE_DESCRIPTION and MODULE_AUTHOR.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-26 09:08:10 +01:00
Axel Lin
933fc7b06c spi: bcm53xx: Fix module dependency
config SPI_BCM53XX needs to depend on BCMA_POSSIBLE and select BCMA.
This fixes below build error:
ERROR: "bcma_driver_unregister" [drivers/spi/spi-bcm53xx.ko] undefined!
ERROR: "__bcma_driver_register" [drivers/spi/spi-bcm53xx.ko] undefined!

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-26 09:08:09 +01:00
Addy Ke
a24e70c0ac spi/rockchip: fix bug that cause the failure to read data in DMA mode
In my test on RK3288-pinky board, if spi is enabled, it will begin to
read data from slave regardless of whether the DMA is ready. So we
need prepare DMA before spi is enable.

Signed-off-by: Addy Ke <addy.ke@rock-chips.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
2014-09-25 14:14:44 +01:00
Alexander Stein
90f90bbb60 spi: fsl-dspi: Remove probe info message
Remove the probe info message which also has wrong output. No need to add
KERN_INFO to pr_info. Output was:
6Freescale DSPI master initialized

Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-25 13:49:17 +01:00
Anders Berg
db4fa45ed3 spi: pl022: Add support for chip select extension
Add support for a extended PL022 which has an extra register for controlling up
to five chip select signals. This controller is found on the AXM5516 SoC.
Unfortunately the PrimeCell identification registers are identical to a
standard ARM PL022. To work around this, the peripheral ID must be overridden
in the device tree using the "arm,primecell-periphid" property with the value
0x000b6022.

Signed-off-by: Anders Berg <anders.berg@avagotech.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-24 10:25:52 +01:00
Xiubo Li
c7908a37ae spi: Fix possible ZERO_SIZE_PTR pointer dereferencing error.
Since we cannot make sure the 'n' will always be none zero here, and
then if either equal to zero, the kzalloc() will return ZERO_SIZE_PTR,
which equals to ((void *)16).

So this patch fix this with just doing the zero check before calling
kzalloc().

Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-24 09:52:43 +01:00
Andy Shevchenko
c3c6e231d8 spi: dw: fix style of code in few places
Make comments be surrounded by spaces and move part of code to one line where
it suits 80 characters.

There is no functional changes.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-24 09:50:33 +01:00
Andy Shevchenko
c3ce15bf2a spi: dw: introduce support of loopback mode
For testing purposes it's good to have a loopback mode enabled. The patch adds
necessary bits for that.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-24 09:49:09 +01:00
Andy Shevchenko
8e45ef682c spi: dw-mid: terminate ongoing transfers at exit
Do full clean up at exit, means terminate all ongoing DMA transfers.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
2014-09-24 09:48:53 +01:00
Andy Shevchenko
b41583e729 spi: dw-mid: respect 8 bit mode
In case of 8 bit mode and DMA usage we end up with every second byte written as
0. We have to respect bits_per_word settings what this patch actually does.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
2014-09-24 09:48:43 +01:00
Alexander Shiyan
a5b4b234e1 spi: clps711x: Migrate to the new clk subsystem
Currently clps711x arch have a fully functional CLK driver.
This patch migrates clps711x-spi driver to use the new CLK subsystem.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-24 09:40:24 +01:00
Ulf Hansson
676e7c257a spi: core: Convert to dev_pm_domain_attach|detach()
Previously only the ACPI PM domain was supported by the spi bus.

Let's convert to the common attach/detach functions for PM domains,
which currently means we are extending the support to include the
generic PM domain as well.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Kevin Hilman <khilman@linaro.org>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-22 15:57:40 +02:00
Kiran Padwal
73e3f1eb51 spi: pl022: Add missing error check for devm_kzalloc
Currently this driver is missing a check on the return value of devm_kzalloc,
which would cause a NULL pointer dereference in a OOM situation.

This patch adds a missing check.

Signed-off-by: Kiran Padwal <kiran.padwal@smartplayin.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-18 11:14:16 -07:00
Mika Westerberg
39d36536d4 spi/pxa2xx-pci: Add support for Intel Braswell
Instead of one port we have 3 ports and all of them can take advantage of
the shared DMA controller.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-09-18 11:54:07 +05:30
Mika Westerberg
b729bf3453 spi/pxa2xx: Don't use slave_id of dma_slave_config
That field has been deprecated in favour of getting the necessary
information from ACPI/DT.

However, we still need to deal systems that are PCI only (no ACPI to back
up). In order to support such systems, we allow the DMA filter function and
its corresponding parameter via pxa2xx_spi_master platform data. Then when
the pxa2xx_spi_dma_setup() doesn't find the channel via ACPI, it falls back
to use the given filter function.

Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-09-18 11:54:07 +05:30
Robin Gong
f62caccd12 spi: spi-imx: add DMA support
Enable DMA support on i.mx6. The read speed can increase from 600KB/s
to 1.2MB/s on i.mx6q. You can disable or enable dma function in dts.
If not set "dma-names" in dts, spi will use PIO mode. This patch only
validate on i.mx6, not i.mx5, but encourage ones to apply this patch
on i.mx5 since they share the same IP.

Note:
  Sometime, there is a weid data in rxfifo after one full tx/rx
transfer finish by DMA on i.mx6dl, so we disable dma functhion on
i.mx6dl.

Signed-off-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: Robin Gong <b38343@freescale.com>
Acked-by: Marek Vasut <marex@denx.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-17 11:36:11 -07:00
Mark Brown
94b0955ddd Merge remote-tracking branches 'spi/fix/davinci', 'spi/fix/dw', 'spi/fix/fsl', 'spi/fix/pl022', 'spi/fix/rockchip' and 'spi/fix/sirf' into spi-linus 2014-09-16 16:20:19 -07:00
Murali Karicheri
365a7bb32e spi: davinci: add support for adding delay between word's transmissions
This patch adds ability to configure delay between transmission of
words over SPI bus if it's required by SPI slave devices.

New optional SPI slave property:
- ti,spi-word-delay : delay between transmission of words
	(SPIFMTn.WDELAY, SPIDAT1.WDEL)

Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-16 10:31:35 -07:00
Grygorii Strashko
6e7488f8f6 spi: davinci: remove empty function davinci_spi_cleanup
Remove empty function davinci_spi_cleanup().

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-16 10:30:10 -07:00
Grygorii Strashko
8936decdd9 spi: davinci: request cs_gpio's from probe
Now CS GPIOs are requested from struct spi_master.setup() callback
and that causes failures when Client SPI device is getting accessed
through SPIDEV driver. The failure happens, because .setup() callback
may be called many times from IOCTL handler and when it's called
second time gpio_request() will fail and return -EBUSY.

Hence, fix it by moving CS GPIOs requesting code in .probe().

Reported-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-13 09:25:46 -07:00
Andy Shevchenko
53288fe9bd spi: dw: don't use mrst prefix anymore
Since driver is used on other platforms and debugfs stuff would be useful there
as well let's substitute mrst_ by dw_ where it suits. Additionally let's use
SPI master device name when print registers dump.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-13 17:03:12 +01:00
Mark Brown
551f6a58d4 Merge branch 'topic/checkpatch' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi into spi-dw 2014-09-13 17:03:05 +01:00
Andy Shevchenko
197e96b4d8 spi: dw-mid: remove FSF address and update copyright
The FSF address is subject to change, thus remove it from the file. While here,
update a copyright line.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-13 17:01:57 +01:00
Andy Shevchenko
b89e9c87dd spi: dw-mid: remove redundant dmac member
Instead of using that member we prefer to use dma_dev which represents actual
struct device of the DMA device.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-13 17:01:57 +01:00
Andy Shevchenko
ea092455d7 spi: dw-mid: remove Moorestown support
The support of the Moorestown was removed [1] from kernel long time ago. This
is just a follow up of that change.

[1] http://www.spinics.net/lists/platform-driver-x86/msg02948.html

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-13 17:01:57 +01:00
Andy Shevchenko
fb57862ead spi: dw-mid: check that DMA was inited before exit
If the driver was compiled with DMA support, but DMA channels weren't acquired
by some reason, mid_spi_dma_exit() will crash the kernel.

Fixes: 7063c0d942 (spi/dw_spi: add DMA support)
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-13 17:01:57 +01:00
Andy Shevchenko
05ed2aee3e spi: dw: remove FSF address
There is no need to keep FSF address in the head of the file. While here, fix
few typos in the header.

There is no functional change.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-13 17:01:56 +01:00
Roland Stigge
61e89e65e3 spi/pl022: Fix error message
This patch fixes an error message typo ("not" missing).

Signed-off-by: Roland Stigge <stigge@antcom.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-09-09 16:21:51 +01:00
Doug Anderson
62946172c8 spi/rockchip: Don't warn if SPI is busy but disabled
The reference manual from Rockchip claims this about the BSF (SPI Busy
Flag):
* 0 - SPI is idle or disabled
* 1 - SPI is actively transferring data

The above doesn't quite appear to be true.  Specifically I found the
busy bit set when SPI was disabled.  Let's change the WARN_ON() so we
only check the busy bit if the controller was enabled.

Signed-off-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-04 23:54:11 +01:00
Doug Anderson
64bc0110f1 spi/rockchip: Fix the wait_for_idle() timeout
The wait_for_idle() could get unlucky and timeout too quickly.
Specifically, the old calculation was effectively:
  timeout = jiffies + 1;
  if (jiffies >= timeout) print warning;

From the above it should be obvious that if jiffies ticks in just the
wrong place then we'll have an effective timeout of 0.

Fix this by effectively changing the above ">=" to a ">".  That gives
us an extra jiffy to finish.

Signed-off-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-04 23:54:11 +01:00
Qipan Li
9593e61582 spi: sirf: cleanup the indentation of marcos
let "#define" statement keep same indentation. the old code layout is
pretty ugly.

Signed-off-by: Qipan Li <Qipan.Li@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-04 23:39:26 +01:00
Qipan Li
810a58b025 spi: sirf: add fifo reset/start for cmd transfer
for command mode spi transfer, HW spec requires to do fifo reset work to
clear FIFO status.

Signed-off-by: Qipan Li <Qipan.Li@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-04 23:37:23 +01:00