As the SAMU ip was not supported in linux,
so delete the SAMU support in powerplay on
asics Bonarire/Hawwii/Tonga/Fiji/Polaris/vegam.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
when bit14 in module parameter ppfeaturemask was set.
od feature will be enabled on Vega10 except vbios not support.
user can read od range by reading sysfs pp_od_clk_voltage,
cat pp_od_clk_voltage
OD_SCLK:
0: 852Mhz 800mV
1: 991Mhz 900mV
2: 1138Mhz 950mV
3: 1269Mhz 1000mV
4: 1348Mhz 1050mV
5: 1399Mhz 1100mV
6: 1440Mhz 1150mV
7: 1500Mhz 1200mV
OD_MCLK:
0: 167Mhz 800mV
1: 500Mhz 800mV
2: 800Mhz 950mV
3: 945Mhz 1000mV
OD_RANGE:
SCLK: 852MHz 2200MHz
MCLK: 167MHz 1500MHz
VDDC: 800mV 1200mV
and can configure the clock/voltage by writing pp_od_clk_voltage
for example:
echo "s 0 900 820">pp_od_clk_voltage to change the sclk/vddc
to 900MHz and 820 mV in dpm level0.
echo "r" to change the clk/voltage to default value.
echo "c">pp_od_clk_voltage
to commit the change
v2: squash in warning fix (Alex)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add power profiling mode dynamic switch based on the workloads.
Currently, support Cumpute, VR, Video, 3D,power saving with Cumpute
have highest prority, power saving have lowest prority.
in manual dpm mode, driver will stop auto switch, just save the client's
requests. user can set power profiling mode through sysfs.
when exit manual dpm mode, driver will response the client's requests.
switch based on the client's prority.
v2: squash in fixes from Rex
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This features controls vega peak current protection to allow
for a wider compatibility with power supplies.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: delete uncessary blank line.
Add static const modifiers to an array
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move the smu_version to struct hwmgr, so it can be shared
by other asics.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This isn't used outside this file.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the vbios to look up the default frequencies
for socclk and dcefclk.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a function to look up the AVFS fuse values for vega10
These are used to populate the avfs fuse table in the smu.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Send the VBIOS bootup VDDC as a SOC floor voltage to SMU
before populating the PPTABLE. After DPM is enabled, This
floor voltage will be removed. This will prevent SMC from
going to Vmin upon receiving PPTable causing a violation.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adds power management support for vega10.
v2: squash in fan control and led config fixes from Rex
v3: squash in dead code removal and socvid fixes from Rex
v4: squash in dpm force level fix from Rex
v5: squash in latest headless, gpu load fixes from Rex
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
