Make the host message module function declarations similar to the other
declarations in vmwgfx_drv.h and include the header in vmwgfx_msg.c
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
Reorganize the fence wait loop somewhat to make it look more like the
examples in set_current_state() kerneldoc, and add some code comments.
Also if we're about to time out, make sure we check again whether the fence
is actually signaled.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
Make sure the error messages are a bit more descriptive, so that
a log reader may understand what's gone wrong.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
As gui_x/y positioning is display unit is protected by
requested_layout_mutex adding vmw_connector_state copy of the same and
modeset commit will refer the state copy to sync with modeset_check
state.
v2: Tested with CONFIG_PROVE_LOCKING enabled.
Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
To avoid race condition between update_layout ioctl and modeset ioctl
for access to gui_x/y positioning added a new mutex
requested_layout_mutex.
Also used drm_for_each_connector_iter to iterate over connector list.
Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
This validation is not required because user-space will send create_fb
request once the memory is allocated. This check should be performed
during mode-setting.
Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
For cases when full modeset is not requested like page-flip, skip
memory validation as the topology is not changed.
Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Call the same display memory validation function which is used by
modeset_check. This ensure consistency that kernel change preferred
mode/topology only if supported.
Also change the internal function to use drm_rect instead of
drm_vmw_rect.
Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
This patch adds display (primary) memory validation during modeset
check. Display memory validation are applicable to both SOU and STDU,
so allow both display unit to undergo this check.
Also added check for SVGA_CAP_NO_BB_RESTRICTION capability which lifts
bounding box restriction for STDU.
Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
vmw_kms_atomic_check_modeset() is currently checking config using the
legacy state, which is updated after a commit has happened.
This means vmw_kms_atomic_check_modeset() will reject an invalid config
on the next update rather than the current one.
Fix this by using the new states for config checking
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Previously when evicting resources we were unconditionally calling
ttm_eu_reserve_buffers with a NULL ww acquire context. That meant all
buffer object reserves were done using trylock semantics.
That makes sense when evicting during resource validation, because then
there already are a number of buffers reserved and using waiting locks
would cause lockdep errors.
That's not the case when unconditionally evicting all resources as part
of driver takedown or hibernation, so in that code path, make sure
we have a ww acquire context to get waiting lock buffer object reserve
semantics.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Only try to unmap cached maps when the buffer is moved into or out from
vram. Otherwise the underlying pages stay the same.
Also when unbinding resources from MOBs about to move, make sure we're
really moving out of MOB memory.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
It makes more sense to have all the buffer object related code in
a single file rather than splitting it up between the resource code
and buffer object pinning utilities.
Place all buffer object related code in vmwgfx_bo.c. Fix up headers
and export resource functionality when needed in the buffer object
code.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
Initially vmware buffer objects were only used as DMA buffers, so the name
DMA buffer was a natural one. However, currently they are used also as
dumb buffers and MOBs backing guest backed objects so renaming them to
buffer objects is logical. Particularly since there is a dmabuf subsystem
in the kernel where a dma buffer means something completely different.
This also renames user-space api structures and IOCTL names
correspondingly, but the old names remain defined for now and the ABI
hasn't changed.
There are a couple of minor style changes to make checkpatch happy.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
We got a few conflicts in drm_atomic.c after merging the DRM writeback support,
now we need a backmerge to unlock develop development on drm-misc-next.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Neither used nor correctly implemented anywhere. Just completely remove
the interface.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/226645/
The device parameter is completely unused because it is available in the
attachment structure as well.
v2: fix kerneldoc as well
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/226643/
plane->fb/old_fb/crtc should no longer be used by atomic
drivers. Stop messing about with them.
Cc: Deepak Rawat <drawat@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Sinclair Yeh <syeh@vmware.com>
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180525185045.29689-7-ville.syrjala@linux.intel.com
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Instead of looking at the (soon to be deprecated) plane->fb we'll
examing plane->state->fb instead. We can do this because
vmw_du_crtc_atomic_check() prevents us from enabling a crtc
without the primary plane also being enabled.
Due to that same reason, I'm actually not sure what the checks here are
for NULL fb. If we can't enable the crtc without an enabled plane
we should always have an fb. But I'll leave that for someone else
to figure out.
Cc: Deepak Rawat <drawat@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Sinclair Yeh <syeh@vmware.com>
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180525185045.29689-6-ville.syrjala@linux.intel.com
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
The only caller of vmw_kms_update_implicit_fb() is the page_flip
hook which itself gets called with the plane mutex already held.
Hence we can look at plane->state safely.
v2: Drop the bogus lockdep assert
Cc: Deepak Rawat <drawat@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Sinclair Yeh <syeh@vmware.com>
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180525185045.29689-4-ville.syrjala@linux.intel.com
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Instead of plane->fb (which we're going to deprecate for atomic drivers)
we need to look at plane->state->fb. The maze of code leading to
vmw_kms_helper_dirty() wasn't particularly clear, but my analysis
concluded that the calls originating from vmw_*_primary_plane_atomic_update()
all pass in the crtc which means we'll never end up in this branch
of the function. All other callers use drm_modeset_lock_all() somewhere
higher up, which means accessing plane->state is safe.
v2: Drop the comment and make the code do what it did before (Thomas)
v3: Drop the bogus lockdep assert
Cc: Deepak Rawat <drawat@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Sinclair Yeh <syeh@vmware.com>
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180525185045.29689-3-ville.syrjala@linux.intel.com
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Instead of looking at plane->fb let's look at the proper new
plane state.
Not that the code makes a ton of sense. It's only going through the
crtcs in the atomic state, so assuming not all of them are included
we're not even calculating the total bandwidth here. Also we're
not considering whether each crtc is actually enabled or not.
Cc: Deepak Rawat <drawat@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Sinclair Yeh <syeh@vmware.com>
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180525185045.29689-2-ville.syrjala@linux.intel.com
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
-----BEGIN PGP SIGNATURE-----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=twst
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2018-06-06-1' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"This starts to support NVIDIA volta hardware with nouveau, and adds
amdgpu support for the GPU in the Kabylake-G (the intel + radeon
single package chip), along with some initial Intel icelake enabling.
Summary:
New Drivers:
- v3d - driver for broadcom V3D V3.x+ hardware
- xen-front - XEN PV display frontend
core:
- handle zpos normalization in the core
- stop looking at legacy pointers in atomic paths
- improved scheduler documentation
- improved aspect ratio validation
- aspect ratio support for 64:27 and 256:135
- drop unused control node code.
i915:
- Icelake (ICL) enabling
- GuC/HuC refactoring
- PSR/PSR2 enabling and fixes
- DPLL management refactoring
- DP MST fixes
- NV12 enabling
- HDCP improvements
- GEM/Execlist/reset improvements
- GVT improvements
- stolen memory first 4k fix
amdgpu:
- Vega 20 support
- VEGAM support (Kabylake-G)
- preOS scanout buffer reservation
- power management gfxoff support for raven
- SR-IOV fixes
- Vega10 power profiles and clock voltage control
- scatter/gather display support on CZ/ST
amdkfd:
- GFX9 dGPU support
- userptr memory mapping
nouveau:
- major refactoring for Volta GV100 support
tda998x:
- HDMI i2c CEC support
etnaviv:
- removed unused logging code
- license text cleanups
- MMU handling improvements
- timeout fence fix for 50 days uptime
tegra:
- IOMMU support in gr2d/gr3d drivers
- zpos support
vc4:
- syncobj support
- CTM, plane alpha and async cursor support
analogix_dp:
- HPD and aux chan fixes
sun4i:
- MIPI DSI support
tilcdc:
- clock divider fixes for OMAP-l138 LCDK board
rcar-du:
- R8A77965 support
- dma-buf fences fixes
- hardware indexed crtc/du group handling
- generic zplane property support
atmel-hclcdc:
- generic zplane property support
mediatek:
- use generic video mode function
exynos:
- S5PV210 FIMD variant support
- IPP v2 framework
- more HW overlays support"
* tag 'drm-next-2018-06-06-1' of git://anongit.freedesktop.org/drm/drm: (1286 commits)
drm/amdgpu: fix 32-bit build warning
drm/exynos: fimc: signedness bug in fimc_setup_clocks()
drm/exynos: scaler: fix static checker warning
drm/amdgpu: Use dev_info() to report amdkfd is not supported for this ASIC
drm/amd/display: Remove use of division operator for long longs
drm/amdgpu: Update GFX info structure to match what vega20 used
drm/amdgpu/pp: remove duplicate assignment
drm/sched: add rcu_barrier after entity fini
drm/amdgpu: move VM BOs on LRU again
drm/amdgpu: consistenly use VM moved flag
drm/amdgpu: kmap PDs/PTs in amdgpu_vm_update_directories
drm/amdgpu: further optimize amdgpu_vm_handle_moved
drm/amdgpu: cleanup amdgpu_vm_validate_pt_bos v2
drm/amdgpu: rework VM state machine lock handling v2
drm/amdgpu: Add runtime VCN PG support
drm/amdgpu: Enable VCN static PG by default on RV
drm/amdgpu: Add VCN static PG support on RV
drm/amdgpu: Enable VCN CG by default on RV
drm/amdgpu: Add static CG control for VCN on RV
drm/exynos: Fix default value for zpos plane property
...
We have had problems displaying fbdev after a resume and as a
workaround we have had to call vmw_fb_refresh(). This has had
a number of unwanted side-effects. The root of the problem was,
however that the coalesced fbdev dirty region was not empty on
the first dirty_mark() after a resume, so a flush was never
scheduled.
Fix this by force scheduling an fbdev flush after resume, and
remove the workaround.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
The error paths were leaking opened channels.
Fix by using dedicated error paths.
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Depending on whether the kernel is compiled with frame-pointer or not,
the temporary memory location used for the bp parameter in these macros
is referenced relative to the stack pointer or the frame pointer.
Hence we can never reference that parameter when we've modified either
the stack pointer or the frame pointer, because then the compiler would
generate an incorrect stack reference.
Fix this by pushing the temporary memory parameter on a known location on
the stack before modifying the stack- and frame pointers.
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
SOU primary plane prepare_fb hook depends upon dmabuf_size to pin up BO
(and not call a new vmw_dmabuf_init) when a new fb size is same as
current fb. This was changed in a recent commit which is causing
page_flip to fail on VM with low display memory and multi-mon failure
when cycle monitors from secondary display.
Cc: <stable@vger.kernel.org> # 4.14, 4.16
Fixes: 20fb5a635a ("drm/vmwgfx: Unpin the screen object backup buffer when not used")
Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
UAPI Changes:
- Fix render node number regression from control node removal.
Driver Changes:
- Small header fix for virgl, used by qemu.
- Use vm_fault_t in qxl.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEuXvWqAysSYEJGuVH/lWMcqZwE8MFAlr6l0MACgkQ/lWMcqZw
E8NFURAAkZ9TqzHRcn/3fMijuv/JslT0mW4CIFw3jm5diCXqrsKQ7TlQK8/q5uys
2vLgsTIKFzIp73ptUf11vyoKnvZA5SHHt55s2glrTDfKS9dkmgP+DcMab6qN31Y3
sPY54o0R/8lBd8YOZh8nfYbHngoeD4SHPIzZYETssklhip/CupMcHs2GtXlsO8nP
9ZNZyJHz0/GQUagUrFRgmVmq1ZF9t9Ap8fVBrkWUoQ02MogTFrPCj6F5AuBds9hR
ZRhGZLu3Ri1BdP06JraDTvbWZ8jQKF9yD4PuQVGAjkuz4LpRrNQCCKJQ+GMSXMTK
JmOB5Yty6/pN+WS+FeV7czbdS/bJDXLXzRh9dc0WOop4gCZPzmYC9HOBSZCZ8i1k
dcpGsJGcgzXgFSgZYISkkn50YUnbdjk44tonSK1qAWvNuo4SdZJFGoMoE3Mxf3/R
LMlfskWX3w8jzo7cWFkSvkh5Zt9MEaKJRKOGm4VUXidZSN/3/ZI1GbyRCZ8eeGxr
R6FK7GYHszBS+whWsA0NcX4KwS7qbktm5JGKpZCevIh9cscBVzQ3tbIugV0EgfAm
8VK1F9VU760pXoN+RRfdH61nZ2QTzmDGZwVtTz0ta5MlkW7YY4bvL5PNbUXYffaK
4EOk/RypONazqJ0B2ZUEHC47/8ETlfJ0bnYIqfR6O7bo7KPfWGQ=
=LG6G
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2018-05-15' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v4.18:
UAPI Changes:
- Fix render node number regression from control node removal.
Driver Changes:
- Small header fix for virgl, used by qemu.
- Use vm_fault_t in qxl.
Signed-off-by: Dave Airlie <airlied@redhat.com>
# gpg: Signature made Tue 15 May 2018 06:16:03 PM AEST
# gpg: using RSA key FE558C72A67013C3
# gpg: Can't check signature: public key not found
Link: https://patchwork.freedesktop.org/patch/msgid/e63306b9-67a0-74ab-8883-08b3d9db72d2@mblankhorst.nl
- Add IPP v2 framework.
. it is a rewritten version of the Exynos mem-to-mem image processing
framework which supprts color space conversion, image up/down-scaling
and rotation. This new version replaces existing userspace API with
new easy-to-use and simple ones so we have already applied the use of
these API to real user, Tizen Platform[1], and also makes existing
Scaler, FIMC, GScaler and Rotator drivers to use IPP v2 core API.
And below are patch lists we have applied to a real user,
https://git.tizen.org/cgit/platform/adaptation/samsung_exynos/libtdm-exynos/log/?h=tizen&qt=grep&q=ipphttps://git.tizen.org/cgit/platform/adaptation/samsung_exynos/libtdm-exynos/commit/?h=tizen&id=b59be207365d10efd489e6f71c8a045b558c44fehttps://git.tizen.org/cgit/platform/kernel/linux-exynos/log/?h=tizen&qt=grep&q=ipp
TDM(Tizen Display Manager) is a Display HAL for Tizen platform.
Ps. Only real user using IPP API is Tizen.
[1] https://www.tizen.org/
- Two cleanups
. One is to just remove mode_set callback from MIPI-DSI driver
because drm_display_mode data is already available from crtc
atomic state.
. And other is to just use new return type, vm_fault_t
for page fault handler.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=M74Y
-----END PGP SIGNATURE-----
Merge tag 'exynos-drm-next-for-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next
- Add S5PV210 FIMD variant support.
- Add IPP v2 framework.
. it is a rewritten version of the Exynos mem-to-mem image processing
framework which supprts color space conversion, image up/down-scaling
and rotation. This new version replaces existing userspace API with
new easy-to-use and simple ones so we have already applied the use of
these API to real user, Tizen Platform[1], and also makes existing
Scaler, FIMC, GScaler and Rotator drivers to use IPP v2 core API.
And below are patch lists we have applied to a real user,
https://git.tizen.org/cgit/platform/adaptation/samsung_exynos/libtdm-exynos/log/?h=tizen&qt=grep&q=ipphttps://git.tizen.org/cgit/platform/adaptation/samsung_exynos/libtdm-exynos/commit/?h=tizen&id=b59be207365d10efd489e6f71c8a045b558c44fehttps://git.tizen.org/cgit/platform/kernel/linux-exynos/log/?h=tizen&qt=grep&q=ipp
TDM(Tizen Display Manager) is a Display HAL for Tizen platform.
Ps. Only real user using IPP API is Tizen.
[1] https://www.tizen.org/
- Two cleanups
. One is to just remove mode_set callback from MIPI-DSI driver
because drm_display_mode data is already available from crtc
atomic state.
. And other is to just use new return type, vm_fault_t
for page fault handler.
Signed-off-by: Dave Airlie <airlied@redhat.com>
# gpg: Signature made Mon 14 May 2018 14:23:53 AEST
# gpg: using RSA key 573834890C4312B8
# gpg: Can't check signature: public key not found
Link: https://patchwork.freedesktop.org/patch/msgid/1526276453-29879-1-git-send-email-inki.dae@samsung.com
Control nodes are no more!
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Sinclair Yeh <syeh@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180420065159.4531-3-daniel.vetter@ffwll.ch
At least since the atomic port, the vmwgfx fbdev code is taking
a number of unnecessary modeset locks. In particular the
kms_set_config() function will grab its own locks, leading to
locking retries. So avoid drm_modeset_lock_all() and instead
provide a local acquire context for kms_set_config(). Also have the
vmw_kms_fbdev_init data itself grab the lock that it needs.
This also fixed a long standing problem that vmw_fb_close() didn't
provide an acquire context for kms_set_config(), causing potential
warnings and hangs during driver unload. This problem was uncovered by the
recent commit "drm/vmwgfx: Improve on hibernation"
Testing done:
Repeated driver load and unload on Ubuntu 16.04.2
Fixes: c3b9b16573 ("drm/vmwgfx: Improve on hibernation")
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Less hits to go through when I git grep over all drivers. These
callbacks are optional.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180405154449.23038-2-daniel.vetter@ffwll.ch
We want to get rid of plane->fb on atomic drivers. Stop looking at it.
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Sinclair Yeh <syeh@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180322152313.6561-13-ville.syrjala@linux.intel.com
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJauCZfAAoJEHm+PkMAQRiGWGUH/2rhdQDkoJpYWnjaQkolECG8
MxpGE7nmIIHxQcbSDdHTGJ8IhVm6Z5wZ7ym/PwCDTT043Y1y341sJrIwL2/nTG6d
HVidk8hFvgN6QzlzVAHT3ZZMII/V9Zt+VV5SUYLGnPAVuJNHo/6uzWlTU5g+NTFo
IquFDdQUaGBlkKqby+NoAFnkV1UAIkW0g22cfvPnlO5GMer0gusGyVNvVp7TNj3C
sqj4Hvt3RMDLMNe9RZ2pFTiOD096n8FWpYftZneUTxFImhRV3Jg5MaaYZm9SI3HW
tXrv/LChT/F1mi5Pkx6tkT5Hr8WvcrwDMJ4It1kom10RqWAgjxIR3CMm448ileY=
=YKUG
-----END PGP SIGNATURE-----
Backmerge tag 'v4.16-rc7' into drm-next
Linux 4.16-rc7
This was requested by Daniel, and things were getting
a bit hard to reconcile, most of the conflicts were
trivial though.
A relative large set of various improvements for vmwgfx. Some of them
have been around for a while, some are relatively new, but functionality
should have been tested in our standalone repo.
* 'vmwgfx-next' of git://people.freedesktop.org/~thomash/linux:
drm/vmwgfx: Bump version patchlevel and date
drm/vmwgfx: use monotonic event timestamps
drm/vmwgfx: Unpin the screen object backup buffer when not used
drm/vmwgfx: Stricter count of legacy surface device resources
drm/vmwgfx: Use kasprintf
drm/vmwgfx: Get rid of the device-private suspended member
drm/vmwgfx: Improve on hibernation
drm/vmwgfx: Avoid pinning fbdev framebuffers
drm/vmwgfx: Fix multiple command buffer context use
drm/vmwgfx: Use the cpu blit utility for framebuffer to screen target blits
drm/vmwgfx: Add a cpu blit utility that can be used for page-backed bos
drm/ttm: Export the ttm_k[un]map_atomic_prot API.
drm/ttm: Clean up kmap_atomic_prot selection code
drm/vmwgfx: Cursor update fixes
drm/vmwgfx: Send the correct nonblock option for atomic_commit
drm/vmwgfx: Move the stdu vblank event to atomic function
drm/vmwgfx: Move screen object page flip to atomic function
drm/vmwgfx: Remove drm_crtc_arm_vblank_event from atomic flush
drm/vmwgfx: Move surface copy cmd to atomic function
drm/vmwgfx: Avoid iterating over display unit if crtc is available
DRM_VMW_EVENT_FENCE_SIGNALED (struct drm_vmw_event_fence) and
DRM_EVENT_VBLANK (struct drm_event_vblank) pass timestamps in 32-bit
seconds/microseconds format.
As of commit c61eef726a ("drm: add support for monotonic vblank
timestamps"), other DRM drivers use monotonic times for drm_event_vblank,
but vmwgfx still uses CLOCK_REALTIME for both events, which suffers from
the y2038/y2106 overflow as well as time jumps.
For consistency, this changes vmwgfx to use ktime_get_ts64 as well,
which solves those problems and avoids the deprecated do_gettimeofday()
function.
This should be transparent to to user space, as long as it doesn't
compare the time against the result of gettimeofday().
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
We were relying on the pinned screen object backup buffer to be destroyed
when not used. But if we hold a copy of the atomic state, like when
hibernating, the backup buffer might not be destroyed since it's
refcounted by the atomic state. This causes us to hibernate with a
buffer pinned in VRAM.
Fix this by only having the buffer pinned when it is actually used by a
screen object.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
For legacy surfaces, they were previously registered as device resources
when the driver resources were created. Since they are evictable we instead
register them as device resources once they are created on the device,
just like for guest-backed surfaces. This has implications during
hibernation where we can't hibernate with device resources active.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Use kasprintf instead of combination of kmalloc and sprintf. Also,
remove the local variables used for storing the string length as they
are not required now.
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
It was used to early block fbdev dirty processing. Replace it with an
unprotected check of the par->dirty.active field. While this might
race with the vmw_fb_off() function, we do a protected check later so
the race will at worst lead to grabbing and releasing a couple of locks.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Make it possible to hibernate also with masters that don't switch VT at
hibernation time. We save and restore modesetting state unless fbdev is
active and enabled at hibernation time.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
fbdev framebuffers were previously pinned to be able to keep them mapped
across updates.
This commit introduces a mechanism that instead revalidates the map on
each update, keeping the map cached across updates. The cached map is torn
down if the underlying pages change. Typically on buffer object moves and
swapouts.
This should be nicer to the system when we have resource contention.
Testing done: Basic fbdev functionality under Fedora 27.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
The start / stop and preempt commands don't honor the context argument
but rather acts on all available contexts.
Also add detection for context 1 availability.
Note that currently there's no driver interface for submitting buffers
using the high-priority command queue (context 1).
Testing done:
Change the default context for command submission to 1 instead of 0,
verify basic desktop functionality including faulty command injection and
recovery.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
This blit was previously performed using two large vmaps, one of which
was teared down and remapped on each blit. Use the more resource-
conserving TTM cpu blit instead.
The blit is used in boundary-box computing mode which makes it possible
to minimize the bounding box used in host operations.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
The utility uses kmap_atomic() instead of vmapping the whole buffer
object. As a result there will be more book-keeping but on some
architectures this will help avoid exhausting vmalloc space and also
avoid expensive TLB flushes.
The blit utility also adds a provision to compute a bounding box of
changed content, which is very useful to optimize presentation speed
of ill-behaved applications that don't supply proper damage regions, and
for page-flips. The cost of computing the bounding box is not that
expensive when done in a cpu-blit utility like this.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
