To avoid using the mach/omap1510.h header file, pass the correct
address as platform data.
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A recent cleanup patch removed the only reference to a local variable
in some configurations.
Move the variable into the one block it is still used in, inside
of an #ifdef, to avoid this warning.
Fixes: 9d773f103b ("video: fbdev: omapfb: lcd_ams_delta: Make use of the helper function dev_err_probe()")
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Here is the set of driver core changes for 5.18-rc1.
Not much here, primarily it was a bunch of cleanups and small updates:
- kobj_type cleanups for default_groups
- documentation updates
- firmware loader minor changes
- component common helper added and take advantage of it in many
drivers (the largest part of this pull request).
There will be a merge conflict in drivers/power/supply/ab8500_chargalg.c
with your tree, the merge conflict should be easy (take all the
changes).
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYkG6PA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylMFwCfSIyAU4oLEgj+/Rfmx4o45cAVIWMAnit3zbdU
wUUCGqKcOnTJEcW6dMPh
=1VVi
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of driver core changes for 5.18-rc1.
Not much here, primarily it was a bunch of cleanups and small updates:
- kobj_type cleanups for default_groups
- documentation updates
- firmware loader minor changes
- component common helper added and take advantage of it in many
drivers (the largest part of this pull request).
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (54 commits)
Documentation: update stable review cycle documentation
drivers/base/dd.c : Remove the initial value of the global variable
Documentation: update stable tree link
Documentation: add link to stable release candidate tree
devres: fix typos in comments
Documentation: add note block surrounding security patch note
samples/kobject: Use sysfs_emit instead of sprintf
base: soc: Make soc_device_match() simpler and easier to read
driver core: dd: fix return value of __setup handler
driver core: Refactor sysfs and drv/bus remove hooks
driver core: Refactor multiple copies of device cleanup
scripts: get_abi.pl: Fix typo in help message
kernfs: fix typos in comments
kernfs: remove unneeded #if 0 guard
ALSA: hda/realtek: Make use of the helper component_compare_dev_name
video: omapfb: dss: Make use of the helper component_compare_dev
power: supply: ab8500: Make use of the helper component_compare_dev
ASoC: codecs: wcd938x: Make use of the helper component_compare/release_of
iommu/mediatek: Make use of the helper component_compare/release_of
drm: of: Make use of the helper component_release_of
...
core:
- Make audio and color plane support checking only happen
when a CEA extension block is found.
- Small selftest fix.
fbdev:
- two regressions fixes from speedup patches.
ttm:
- Fix a small regression from ttm_resource_fini()
i915:
- Reject unsupported TMDS rates on ICL+
- Treat SAGV block time 0 as SAGV disabled
- Fix PSF GV point mask when SAGV is not possible
- Fix renamed INTEL_INFO->media.arch/ver field
-----BEGIN PGP SIGNATURE-----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=gTPb
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2022-03-25' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Some fixes were queued up in and in light of the fbdev regressions,
I've pulled those in as well.
core:
- Make audio and color plane support checking only happen when a CEA
extension block is found.
- Small selftest fix.
fbdev:
- two regressions fixes from speedup patches.
ttm:
- Fix a small regression from ttm_resource_fini()
i915:
- Reject unsupported TMDS rates on ICL+
- Treat SAGV block time 0 as SAGV disabled
- Fix PSF GV point mask when SAGV is not possible
- Fix renamed INTEL_INFO->media.arch/ver field"
* tag 'drm-next-2022-03-25' of git://anongit.freedesktop.org/drm/drm:
fbdev: Fix cfb_imageblit() for arbitrary image widths
fbdev: Fix sys_imageblit() for arbitrary image widths
drm/edid: fix CEA extension byte #3 parsing
drm/edid: check basic audio support on CEA extension block
drm/i915: Fix renamed struct field
drm/i915: Fix PSF GV point mask when SAGV is not possible
drm/i915: Treat SAGV block time 0 as SAGV disabled
drm/i915: Reject unsupported TMDS rates on ICL+
drm/selftest: plane_helper: Put test structures in static storage
drm/ttm: Fix a kernel oops due to an invalid read
Commit 0d03011894 ("fbdev: Improve performance of cfb_imageblit()")
broke cfb_imageblit() for image widths that are not aligned to 8-bit
boundaries. Fix this by handling the trailing pixels on each line
separately. The performance improvements in the original commit do not
regress by this change.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 0d03011894 ("fbdev: Improve performance of cfb_imageblit()")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220313192952.12058-3-tzimmermann@suse.de
Commit 6f29e04938 ("fbdev: Improve performance of sys_imageblit()")
broke sys_imageblit() for image width that are not aligned to 8-bit
boundaries. Fix this by handling the trailing pixels on each line
separately. The performance improvements in the original commit do not
regress by this change.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 6f29e04938 ("fbdev: Improve performance of sys_imageblit()")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220313192952.12058-2-tzimmermann@suse.de
dma-buf:
- rename dma-buf-map to iosys-map
core:
- move buddy allocator to core
- add pci/platform init macros
- improve EDID parser deep color handling
- EDID timing type 7 support
- add GPD Win Max quirk
- add yes/no helpers to string_helpers
- flatten syncobj chains
- add nomodeset support to lots of drivers
- improve fb-helper clipping support
- add default property value interface
fbdev:
- improve fbdev ops speed
ttm:
- add a backpointer from ttm bo->ttm resource
dp:
- move displayport headers
- add a dp helper module
bridge:
- anx7625 atomic support, HDCP support
panel:
- split out panel-lvds and lvds bindings
- find panels in OF subnodes
privacy:
- add chromeos privacy screen support
fb:
- hot unplug fw fb on forced removal
simpledrm:
- request region instead of marking ioresource busy
- add panel oreintation property
udmabuf:
- fix oops with 0 pages
amdgpu:
- power management code cleanup
- Enable freesync video mode by default
- RAS code cleanup
- Improve VRAM access for debug using SDMA
- SR-IOV rework special register access and fixes
- profiling power state request ioctl
- expose IP discovery via sysfs
- Cyan skillfish updates
- GC 10.3.7, SDMA 5.2.7, DCN 3.1.6 updates
- expose benchmark tests via debugfs
- add module param to disable XGMI for testing
- GPU reset debugfs register dumping support
amdkfd:
- CRIU support
- SDMA queue fixes
radeon:
- UVD suspend fix
- iMac backlight fix
i915:
- minimal parallel submission for execlists
- DG2-G12 subplatform added
- DG2 programming workarounds
- DG2 accelerated migration support
- flat CCS and CCS engine support for XeHP
- initial small BAR support
- drop fake LMEM support
- ADL-N PCH support
- bigjoiner updates
- introduce VMA resources and async unbinding
- register definitions cleanups
- multi-FBC refactoring
- DG1 OPROM over SPI support
- ADL-N platform enabling
- opregion mailbox #5 support
- DP MST ESI improvements
- drm device based logging
- async flip optimisation for DG2
- CPU arch abstraction fixes
- improve GuC ADS init to work on aarch64
- tweak TTM LRU priority hint
- GuC 69.0.3 support
- remove short term execbuf pins
nouveau:
- higher DP/eDP bitrates
- backlight fixes
msm:
- dpu + dp support for sc8180x
- dp support for sm8350
- dpu + dsi support for qcm2290
- 10nm dsi phy tuning support
- bridge support for dp encoder
- gpu support for additional 7c3 SKUs
ingenic:
- HDMI support for JZ4780
- aux channel EDID support
ast:
- AST2600 support
- add wide screen support
- create DP/DVI connectors
omapdrm:
- fix implicit dma_buf fencing
vc4:
- add CSC + full range support
- better display firmware handoff
panfrost:
- add initial dual-core GPU support
stm:
- new revision support
- fb handover support
mediatek:
- transfer display binding document to yaml format.
- add mt8195 display device binding.
- allow commands to be sent during video mode.
- add wait_for_event for crtc disable by cmdq.
tegra:
- YUV format support
rcar-du:
- LVDS support for M3-W+ (R8A77961)
exynos:
- BGR pixel format for FIMD device
-----BEGIN PGP SIGNATURE-----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=uRsT
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2022-03-24' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"Lots of work all over, Intel improving DG2 support, amdkfd CRIU
support, msm new hw support, and faster fbdev support.
dma-buf:
- rename dma-buf-map to iosys-map
core:
- move buddy allocator to core
- add pci/platform init macros
- improve EDID parser deep color handling
- EDID timing type 7 support
- add GPD Win Max quirk
- add yes/no helpers to string_helpers
- flatten syncobj chains
- add nomodeset support to lots of drivers
- improve fb-helper clipping support
- add default property value interface
fbdev:
- improve fbdev ops speed
ttm:
- add a backpointer from ttm bo->ttm resource
dp:
- move displayport headers
- add a dp helper module
bridge:
- anx7625 atomic support, HDCP support
panel:
- split out panel-lvds and lvds bindings
- find panels in OF subnodes
privacy:
- add chromeos privacy screen support
fb:
- hot unplug fw fb on forced removal
simpledrm:
- request region instead of marking ioresource busy
- add panel oreintation property
udmabuf:
- fix oops with 0 pages
amdgpu:
- power management code cleanup
- Enable freesync video mode by default
- RAS code cleanup
- Improve VRAM access for debug using SDMA
- SR-IOV rework special register access and fixes
- profiling power state request ioctl
- expose IP discovery via sysfs
- Cyan skillfish updates
- GC 10.3.7, SDMA 5.2.7, DCN 3.1.6 updates
- expose benchmark tests via debugfs
- add module param to disable XGMI for testing
- GPU reset debugfs register dumping support
amdkfd:
- CRIU support
- SDMA queue fixes
radeon:
- UVD suspend fix
- iMac backlight fix
i915:
- minimal parallel submission for execlists
- DG2-G12 subplatform added
- DG2 programming workarounds
- DG2 accelerated migration support
- flat CCS and CCS engine support for XeHP
- initial small BAR support
- drop fake LMEM support
- ADL-N PCH support
- bigjoiner updates
- introduce VMA resources and async unbinding
- register definitions cleanups
- multi-FBC refactoring
- DG1 OPROM over SPI support
- ADL-N platform enabling
- opregion mailbox #5 support
- DP MST ESI improvements
- drm device based logging
- async flip optimisation for DG2
- CPU arch abstraction fixes
- improve GuC ADS init to work on aarch64
- tweak TTM LRU priority hint
- GuC 69.0.3 support
- remove short term execbuf pins
nouveau:
- higher DP/eDP bitrates
- backlight fixes
msm:
- dpu + dp support for sc8180x
- dp support for sm8350
- dpu + dsi support for qcm2290
- 10nm dsi phy tuning support
- bridge support for dp encoder
- gpu support for additional 7c3 SKUs
ingenic:
- HDMI support for JZ4780
- aux channel EDID support
ast:
- AST2600 support
- add wide screen support
- create DP/DVI connectors
omapdrm:
- fix implicit dma_buf fencing
vc4:
- add CSC + full range support
- better display firmware handoff
panfrost:
- add initial dual-core GPU support
stm:
- new revision support
- fb handover support
mediatek:
- transfer display binding document to yaml format.
- add mt8195 display device binding.
- allow commands to be sent during video mode.
- add wait_for_event for crtc disable by cmdq.
tegra:
- YUV format support
rcar-du:
- LVDS support for M3-W+ (R8A77961)
exynos:
- BGR pixel format for FIMD device"
* tag 'drm-next-2022-03-24' of git://anongit.freedesktop.org/drm/drm: (1529 commits)
drm/i915/display: Do not re-enable PSR after it was marked as not reliable
drm/i915/display: Fix HPD short pulse handling for eDP
drm/amdgpu: Use drm_mode_copy()
drm/radeon: Use drm_mode_copy()
drm/amdgpu: Use ternary operator in `vcn_v1_0_start()`
drm/amdgpu: Remove pointless on stack mode copies
drm/amd/pm: fix indenting in __smu_cmn_reg_print_error()
drm/amdgpu/dc: fix typos in comments
drm/amdgpu: fix typos in comments
drm/amd/pm: fix typos in comments
drm/amdgpu: Add stolen reserved memory for MI25 SRIOV.
drm/amdgpu: Merge get_reserved_allocation to get_vbios_allocations.
drm/amdkfd: evict svm bo worker handle error
drm/amdgpu/vcn: fix vcn ring test failure in igt reload test
drm/amdgpu: only allow secure submission on rings which support that
drm/amdgpu: fixed the warnings reported by kernel test robot
drm/amd/display: 3.2.177
drm/amd/display: [FW Promotion] Release 0.0.108.0
drm/amd/display: Add save/restore PANEL_PWRSEQ_REF_DIV2
drm/amd/display: Wait for hubp read line for Pollock
...
There are three sets of updates for 5.18 in the asm-generic tree:
- The set_fs()/get_fs() infrastructure gets removed for good. This
was already gone from all major architectures, but now we can
finally remove it everywhere, which loses some particularly
tricky and error-prone code.
There is a small merge conflict against a parisc cleanup, the
solution is to use their new version.
- The nds32 architecture ends its tenure in the Linux kernel. The
hardware is still used and the code is in reasonable shape, but
the mainline port is not actively maintained any more, as all
remaining users are thought to run vendor kernels that would never
be updated to a future release.
There are some obvious conflicts against changes to the removed
files.
- A series from Masahiro Yamada cleans up some of the uapi header
files to pass the compile-time checks.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmI69BsACgkQmmx57+YA
GNn/zA//f4d5VTT0ThhRxRWTu9BdThGHoB8TUcY7iOhbsWu0X/913NItRC3UeWNl
IdmisaXgVtirg1dcC2pWUmrcHdoWOCEGfK4+Zr2NhSWfuZDWvODHK9pGWk4WLnhe
cQgUNBvIuuAMryGtrOBwHPO4TpfCyy2ioeVP36ZfcsWXdDxTrqfaq/56mk3sxIP6
sUTk1UEjut9NG4C9xIIvcSU50R3l6LryQE/H9kyTLtaSvfvTOvprcVYCq0GPmSzo
DtQ1Wwa9zbJ+4EqoMiP5RrgQwWvOTg2iRByLU8ytwlX3e/SEF0uihvMv1FQbL8zG
G8RhGUOKQSEhaBfc3lIkm8GpOVPh0uHzB6zhn7daVmAWtazRD2Nu59BMjipa+ims
a8Z58iHH7jRAnKeEkVZqXKb1CEiUxaQx/IeVPzN4QlwMhDtwrI76LY7ZJ1zCqTGY
ENG0yRLav1XselYBslOYXGtOEWcY5EZPWqLyWbp4P9vz2g0Fe0gZxoIOvPmNQc89
QnfXpCt7vm/DGkyO255myu08GOLeMkisVqUIzLDB9avlym5mri7T7vk9abBa2YyO
CRpTL5gl1/qKPWuH1UI5mvhT+sbbBE2SUHSuy84btns39ZKKKynwCtdu+hSQkKLE
h9pV30Gf1cLTD4JAE0RWlUgOmbBLVp34loTOexQj4MrLM1noOnw=
=vtCN
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"There are three sets of updates for 5.18 in the asm-generic tree:
- The set_fs()/get_fs() infrastructure gets removed for good.
This was already gone from all major architectures, but now we can
finally remove it everywhere, which loses some particularly tricky
and error-prone code. There is a small merge conflict against a
parisc cleanup, the solution is to use their new version.
- The nds32 architecture ends its tenure in the Linux kernel.
The hardware is still used and the code is in reasonable shape, but
the mainline port is not actively maintained any more, as all
remaining users are thought to run vendor kernels that would never
be updated to a future release.
- A series from Masahiro Yamada cleans up some of the uapi header
files to pass the compile-time checks"
* tag 'asm-generic-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (27 commits)
nds32: Remove the architecture
uaccess: remove CONFIG_SET_FS
ia64: remove CONFIG_SET_FS support
sh: remove CONFIG_SET_FS support
sparc64: remove CONFIG_SET_FS support
lib/test_lockup: fix kernel pointer check for separate address spaces
uaccess: generalize access_ok()
uaccess: fix type mismatch warnings from access_ok()
arm64: simplify access_ok()
m68k: fix access_ok for coldfire
MIPS: use simpler access_ok()
MIPS: Handle address errors for accesses above CPU max virtual user address
uaccess: add generic __{get,put}_kernel_nofault
nios2: drop access_ok() check from __put_user()
x86: use more conventional access_ok() definition
x86: remove __range_not_ok()
sparc64: add __{get,put}_kernel_nofault()
nds32: fix access_ok() checks in get/put_user
uaccess: fix nios2 and microblaze get_user_8()
sparc64: fix building assembly files
...
Lots of small fixes and code cleanups across most of the fbdev drivers.
This includes conversions to use helper functions, const conversions, spelling
fixes, help text updates, adding return value checks, small build fixes, and
much more.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCYjogFQAKCRD3ErUQojoP
X3Y7AQD/0Qd0zm6klv4EPeyLXOYzs6uXdyHiJGyCBABP3WxKZQD+J4yNXjd1g50A
iGbsawaUpFMcaXTETr0NcrtRkc5jCgY=
=HHa3
-----END PGP SIGNATURE-----
Merge tag 'for-5.18/fbdev-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev updates from Helge Deller:
"Lots of small fixes and code cleanups across most of the fbdev
drivers.
This includes conversions to use helper functions, const conversions,
spelling fixes, help text updates, adding return value checks, small
build fixes, and much more"
* tag 'for-5.18/fbdev-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (59 commits)
video: fbdev: kyro: make read-only array ODValues static const
video: fbdev: offb: fix warning comparing pointer to 0
video: fbdev: omapfb: Add missing of_node_put() in dvic_probe_of
video: fbdev: sm712fb: Fix crash in smtcfb_write()
video: fbdev: s3c-fb: fix platform_get_irq.cocci warning
video: fbdev: sm712fb: Fix crash in smtcfb_read()
video: fbdev: via: check the return value of kstrdup()
video: fbdev: au1100fb: Spelling s/palette/palette/
video: fbdev: atari: Atari 2 bpp (STe) palette bugfix
video: fbdev: atari: Remove unused atafb_setcolreg()
video: fbdev: atari: Convert to standard round_up() helper
video: fbdev: atari: Fix TT High video mode
video: fbdev: udlfb: replace snprintf in show functions with sysfs_emit
video: fbdev: omapfb: panel-tpo-td043mtea1: Use sysfs_emit() instead of snprintf()
video: fbdev: omapfb: panel-dsi-cm: Use sysfs_emit() instead of snprintf()
video: fbdev: omapfb: Use sysfs_emit() instead of snprintf()
video: fbdev: s3c-fb: Use platform_get_irq() to get the interrupt
video: fbdev: Fix wrong file path for pvr2fb.c in Kconfig help text
video: fbdev: pxa3xx-gcu: Remove unnecessary print function dev_err()
video: fbdev: pxa168fb: Remove unnecessary print function dev_err()
...
Primarily this series converts some of the address_space operations
to take a folio instead of a page.
->is_partially_uptodate() takes a folio instead of a page and changes the
type of the 'from' and 'count' arguments to make it obvious they're bytes.
->invalidatepage() becomes ->invalidate_folio() and has a similar type change.
->launder_page() becomes ->launder_folio()
->set_page_dirty() becomes ->dirty_folio() and adds the address_space as
an argument.
There are a couple of other misc changes up front that weren't worth
separating into their own pull request.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAmI4hqMACgkQDpNsjXcp
gj7r7Af/fVJ7m8kKqjP/IayX3HiJRuIDQw+vM++BlRNXdjz+IyED6whdmFGxJeOY
BMyT+8ApOAz7ErS4G+7fAv4ScJK/aEgFUsnSeAiCp0PliiEJ5NNJzElp6sVmQ7H5
SX7+Ek444FZUGsQuy0qL7/ELpR3ditnD7x+5U2g0p5TeaHGUQn84crRyfR4xuhNG
EBD9D71BOb7OxUcOHe93pTkK51QsQ0aCrcIsB1tkK5KR0BAthn1HqF7ehL90Rvrr
omx5M7aDWGY4oj7IKrhlAs+55Ah2WaOzrZBp0FXNbr4UENDBKWKyUxErwa4xPkf6
Gm1iQG/CspOHnxN3YWsd5WjtlL3A+A==
=cOiq
-----END PGP SIGNATURE-----
Merge tag 'folio-5.18b' of git://git.infradead.org/users/willy/pagecache
Pull filesystem folio updates from Matthew Wilcox:
"Primarily this series converts some of the address_space operations to
take a folio instead of a page.
Notably:
- a_ops->is_partially_uptodate() takes a folio instead of a page and
changes the type of the 'from' and 'count' arguments to make it
obvious they're bytes.
- a_ops->invalidatepage() becomes ->invalidate_folio() and has a
similar type change.
- a_ops->launder_page() becomes ->launder_folio()
- a_ops->set_page_dirty() becomes ->dirty_folio() and adds the
address_space as an argument.
There are a couple of other misc changes up front that weren't worth
separating into their own pull request"
* tag 'folio-5.18b' of git://git.infradead.org/users/willy/pagecache: (53 commits)
fs: Remove aops ->set_page_dirty
fb_defio: Use noop_dirty_folio()
fs: Convert __set_page_dirty_no_writeback to noop_dirty_folio
fs: Convert __set_page_dirty_buffers to block_dirty_folio
nilfs: Convert nilfs_set_page_dirty() to nilfs_dirty_folio()
mm: Convert swap_set_page_dirty() to swap_dirty_folio()
ubifs: Convert ubifs_set_page_dirty to ubifs_dirty_folio
f2fs: Convert f2fs_set_node_page_dirty to f2fs_dirty_node_folio
f2fs: Convert f2fs_set_data_page_dirty to f2fs_dirty_data_folio
f2fs: Convert f2fs_set_meta_page_dirty to f2fs_dirty_meta_folio
afs: Convert afs_dir_set_page_dirty() to afs_dir_dirty_folio()
btrfs: Convert extent_range_redirty_for_io() to use folios
fs: Convert trivial uses of __set_page_dirty_nobuffers to filemap_dirty_folio
btrfs: Convert from set_page_dirty to dirty_folio
fscache: Convert fscache_set_page_dirty() to fscache_dirty_folio()
fs: Add aops->dirty_folio
fs: Remove aops->launder_page
orangefs: Convert launder_page to launder_folio
nfs: Convert from launder_page to launder_folio
fuse: Convert from launder_page to launder_folio
...
The overwhelming bulk of this pull request is a change from Uwe
Kleine-König which changes the return type of the remove() function to
void as part of some wider work he's doing to do this for all bus types,
causing updates to most SPI device drivers. The branch with that on has
been cross merged with a couple of other trees which added new SPI
drivers this cycle, I'm not expecting any build issues resulting from
the change.
Otherwise it's been a relatively quiet release with some new device
support, a few minor features and the welcome completion of the
conversion of the subsystem to use GPIO descriptors rather than numbers:
- Change return type of remove() to void.
- Completion of the conversion of SPI controller drivers to use GPIO
descriptors rather than numbers.
- Quite a few DT schema conversions.
- Support for multiple SPI devices on a bus in ACPI systems.
- Big overhaul of the PXA2xx SPI driver.
- Support for AMD AMDI0062, Intel Raptor Lake, Mediatek MT7986 and
MT8186, nVidia Tegra210 and Tegra234, Renesas RZ/V2L, Tesla FSD and
Sunplus SP7021.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmI4b+8ACgkQJNaLcl1U
h9AB+Qf/WhPzDSCdhK1repnSmEpRNs/J6hItmY2H6pTQaWALpfTB0+p1Nb5tAotg
fHbu6a2AsiiwWt+tDal44GFYhS0CDSOT4hqgLV8msyDDPPJqqr7A2dbu7YrCjTVI
TgNZNwxW7c2LgqBXR9GV7NPWYoxYxveoYh+L+05MSuSQxSOvPl6LUZiZPnPufQM6
dCpEh19atrtasFg3rFnslWBd2C3h8hb6YT7vUZs9gxhg3FvSgpYQwzz5SfFgHXK6
Rg07m8fDTSjf2qo1C4pc/d1Ni1xBe7aHKMtjtR3jJ4q8QqiawfCcvvOep/Iaec1+
s3qnDthohWMJoF1W6ERf3HiAgNIfhg==
=4tlR
-----END PGP SIGNATURE-----
Merge tag 'spi-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"The overwhelming bulk of this pull request is a change from Uwe
Kleine-König which changes the return type of the remove() function to
void as part of some wider work he's doing to do this for all bus
types, causing updates to most SPI device drivers. The branch with
that on has been cross merged with a couple of other trees which added
new SPI drivers this cycle, I'm not expecting any build issues
resulting from the change.
Otherwise it's been a relatively quiet release with some new device
support, a few minor features and the welcome completion of the
conversion of the subsystem to use GPIO descriptors rather than
numbers:
- Change return type of remove() to void.
- Completion of the conversion of SPI controller drivers to use GPIO
descriptors rather than numbers.
- Quite a few DT schema conversions.
- Support for multiple SPI devices on a bus in ACPI systems.
- Big overhaul of the PXA2xx SPI driver.
- Support for AMD AMDI0062, Intel Raptor Lake, Mediatek MT7986 and
MT8186, nVidia Tegra210 and Tegra234, Renesas RZ/V2L, Tesla FSD and
Sunplus SP7021"
[ And this is obviously where that spi change that snuck into the
regulator tree _should_ have been :^]
* tag 'spi-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (124 commits)
spi: fsi: Implement a timeout for polling status
spi: Fix erroneous sgs value with min_t()
spi: tegra20: Use of_device_get_match_data()
spi: mediatek: add ipm design support for MT7986
spi: Add compatible for MT7986
spi: sun4i: fix typos in comments
spi: mediatek: support tick_delay without enhance_timing
spi: Update clock-names property for arm pl022
spi: rockchip-sfc: fix platform_get_irq.cocci warning
spi: s3c64xx: Add spi port configuration for Tesla FSD SoC
spi: dt-bindings: samsung: Add fsd spi compatible
spi: topcliff-pch: Prevent usage of potentially stale DMA device
spi: tegra210-quad: combined sequence mode
spi: tegra210-quad: add acpi support
spi: npcm-fiu: Fix typo ("npxm")
spi: Fix Tegra QSPI example
spi: qup: replace spin_lock_irqsave by spin_lock in hard IRQ
spi: cadence: fix platform_get_irq.cocci warning
spi: Update NXP Flexspi maintainer details
dt-bindings: mfd: maxim,max77802: Convert to dtschema
...
Remove the custom implementation of set_page_dirty.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
The stifb driver (for Artist/HCRX graphics on PA-RISC) was missing
the fillrect function.
Tested on a 715/64 PA-RISC machine and in qemu.
Signed-off-by: Helge Deller <deller@gmx.de>
Don't populate the read-only array ODValues on the stack but
instead make it static const. Also makes the object code a little
smaller.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Fix the following coccicheck warning:
drivers/video/fbdev/offb.c:415:13-14: WARNING comparing pointer to 0
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Use devm_add_action_or_reset() instead of devm_add_action()+hand writing
what is done in the release function, should an error occur.
This is more straightforward and saves a few lines of code.
While at it, remove a useless test in devm_backlight_release(). 'data' is
known to be not NULL when this function is called.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/f998a4291d865273afa0d1f85764a9ac7fbc1b64.1644738084.git.christophe.jaillet@wanadoo.fr
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
Fixes: f76ee892a9 ("omapfb: copy omapdss & displays for omapfb")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
The nds32 architecture, also known as AndeStar V3, is a custom 32-bit
RISC target designed by Andes Technologies. Support was added to the
kernel in 2016 as the replacement RISC-V based V5 processors were
already announced, and maintained by (current or former) Andes
employees.
As explained by Alan Kao, new customers are now all using RISC-V,
and all known nds32 users are already on longterm stable kernels
provided by Andes, with no development work going into mainline
support any more.
While the port is still in a reasonably good shape, it only gets
worse over time without active maintainers, so it seems best
to remove it before it becomes unusable. As always, if it turns
out that there are mainline users after all, and they volunteer
to maintain the port in the future, the removal can be reverted.
Link: https://lore.kernel.org/linux-mm/YhdWNLUhk+x9RAzU@yamatobi.andestech.com/
Link: https://lore.kernel.org/lkml/20220302065213.82702-1-alankao@andestech.com/
Link: https://www.andestech.com/en/products-solutions/andestar-architecture/
Signed-off-by: Alan Kao <alankao@andestech.com>
[arnd: rewrite changelog to provide more background]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
UAPI Changes:
Cross-subsystem Changes:
- Improve performance of some fbdev ops, in some cases up to 6x faster.
Core Changes:
- Some small DP fixes.
- Find panels in subnodes of OF devices, and add of_get_drm_panel_display_mode
to retrieve mode.
- Add drm_object_property_get_default_value and use it for resetting
zpos in plane state reset, removing the need for individual drivers
to do it.
- Same for color encoding and color range props.
- Update panic handling todo doc.
- Add todo that format conversion helpers should be sped up similarly to fbdev ops.
Driver Changes:
- Add panel orientation property to simpledrm for quirked panels.
- Assorted small fixes to tiny/repaper, nouveau, stm, omap, ssd130x.
- Add crc support to stm/ltdc.
- Add MIPI DBI compatible SPI driver
- Assorted small fixes to tiny panels and bridge drivers.
- Add AST2600 support to aspeed.
-----BEGIN PGP SIGNATURE-----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=TVQP
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2022-03-03' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.18:
UAPI Changes:
Cross-subsystem Changes:
- Improve performance of some fbdev ops, in some cases up to 6x faster.
Core Changes:
- Some small DP fixes.
- Find panels in subnodes of OF devices, and add of_get_drm_panel_display_mode
to retrieve mode.
- Add drm_object_property_get_default_value and use it for resetting
zpos in plane state reset, removing the need for individual drivers
to do it.
- Same for color encoding and color range props.
- Update panic handling todo doc.
- Add todo that format conversion helpers should be sped up similarly to fbdev ops.
Driver Changes:
- Add panel orientation property to simpledrm for quirked panels.
- Assorted small fixes to tiny/repaper, nouveau, stm, omap, ssd130x.
- Add crc support to stm/ltdc.
- Add MIPI DBI compatible SPI driver
- Assorted small fixes to tiny panels and bridge drivers.
- Add AST2600 support to aspeed.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/48fabd78-ade9-f80b-c724-13726c7be69e@linux.intel.com
When the sm712fb driver writes three bytes to the framebuffer, the
driver will crash:
BUG: unable to handle page fault for address: ffffc90001ffffff
RIP: 0010:smtcfb_write+0x454/0x5b0
Call Trace:
vfs_write+0x291/0xd60
? do_sys_openat2+0x27d/0x350
? __fget_light+0x54/0x340
ksys_write+0xce/0x190
do_syscall_64+0x43/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fix it by removing the open-coded endianness fixup-code.
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Improve the performance of cfb_imageblit() by manually unrolling
the inner blitting loop and moving some invariants out. The compiler
failed to do this automatically. This change keeps cfb_imageblit()
in sync with sys_imagebit().
A microbenchmark measures the average number of CPU cycles
for cfb_imageblit() after a stabilizing period of a few minutes
(i7-4790, FullHD, simpledrm, kernel with debugging).
cfb_imageblit(), new: 15724 cycles
cfb_imageblit(): old: 30566 cycles
In the optimized case, cfb_imageblit() is now ~2x faster than before.
v3:
* fix commit description (Pekka)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220223193804.18636-5-tzimmermann@suse.de
Improve the performance of sys_imageblit() by manually unrolling
the inner blitting loop and moving some invariants out. The compiler
failed to do this automatically. The resulting binary code was even
slower than the cfb_imageblit() helper, which uses the same algorithm,
but operates on I/O memory.
A microbenchmark measures the average number of CPU cycles
for sys_imageblit() after a stabilizing period of a few minutes
(i7-4790, FullHD, simpledrm, kernel with debugging). The value
for CFB is given as a reference.
sys_imageblit(), new: 25934 cycles
sys_imageblit(), old: 35944 cycles
cfb_imageblit(): 30566 cycles
In the optimized case, sys_imageblit() is now ~30% faster than before
and ~20% faster than cfb_imageblit().
v2:
* move switch out of inner loop (Gerd)
* remove test for alignment of dst1 (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220223193804.18636-3-tzimmermann@suse.de
Improve the performance of sys_fillrect() by using word-aligned
32/64-bit mov instructions. While the code tried to implement this,
the compiler failed to create fast instructions. The resulting
binary instructions were even slower than cfb_fillrect(), which
uses the same algorithm, but operates on I/O memory.
A microbenchmark measures the average number of CPU cycles
for sys_fillrect() after a stabilizing period of a few minutes
(i7-4790, FullHD, simpledrm, kernel with debugging). The value
for CFB is given as a reference.
sys_fillrect(), new: 26586 cycles
sys_fillrect(), old: 166603 cycles
cfb_fillrect(): 41012 cycles
In the optimized case, sys_fillrect() is now ~6x faster than before
and ~1.5x faster than the CFB implementation.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220223193804.18636-2-tzimmermann@suse.de
Zheyu Ma reported this crash in the sm712fb driver when reading
three bytes from the framebuffer:
BUG: unable to handle page fault for address: ffffc90001ffffff
RIP: 0010:smtcfb_read+0x230/0x3e0
Call Trace:
vfs_read+0x198/0xa00
? do_sys_openat2+0x27d/0x350
? __fget_light+0x54/0x340
ksys_read+0xce/0x190
do_syscall_64+0x43/0x90
Fix it by removing the open-coded endianess fixup-code and
by moving the pointer post decrement out the fb_readl() function.
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Tested-by: Zheyu Ma <zheyuma97@gmail.com>
Cc: stable@vger.kernel.org
UAPI Changes:
Cross-subsystem Changes:
- Split out panel-lvds and lvds dt bindings .
- Put yes/no on/off disabled/enabled strings in linux/string_helpers.h
and use it in drivers and tomoyo.
- Clarify dma_fence_chain and dma_fence_array should never include eachother.
- Flatten chains in syncobj's.
- Don't double add in fbdev/defio when page is already enlisted.
- Don't sort deferred-I/O pages by default in fbdev.
Core Changes:
- Fix missing pm_runtime_put_sync in bridge.
- Set modifier support to only linear fb modifier if drivers don't
advertise support.
- As a result, we remove allow_fb_modifiers.
- Add missing clear for EDID Deep Color Modes in drm_reset_display_info.
- Assorted documentation updates.
- Warn once in drm_clflush if there is no arch support.
- Add missing select for dp helper in drm_panel_edp.
- Assorted small fixes.
- Improve fb-helper's clipping handling.
- Don't dump shmem mmaps in a core dump.
- Add accounting to ttm resource manager, and use it in amdgpu.
- Allow querying the detected eDP panel through debugfs.
- Add helpers for xrgb8888 to 8 and 1 bits gray.
- Improve drm's buddy allocator.
- Add selftests for the buddy allocator.
Driver Changes:
- Add support for nomodeset to a lot of drm drivers.
- Use drm_module_*_driver in a lot of drm drivers.
- Assorted small fixes to bridge/lt9611, v3d, vc4, vmwgfx, mxsfb, nouveau,
bridge/dw-hdmi, panfrost, lima, ingenic, sprd, bridge/anx7625, ti-sn65dsi86.
- Add bridge/it6505.
- Create DP and DVI-I connectors in ast.
- Assorted nouveau backlight fixes.
- Rework amdgpu reset handling.
- Add dt bindings for ingenic,jz4780-dw-hdmi.
- Support reading edid through aux channel in ingenic.
- Add a drm driver for Solomon SSD130x OLED displays.
- Add simple support for sharp LQ140M1JW46.
- Add more panels to nt35560.
-----BEGIN PGP SIGNATURE-----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=HuwD
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2022-02-23' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.18:
UAPI Changes:
Cross-subsystem Changes:
- Split out panel-lvds and lvds dt bindings .
- Put yes/no on/off disabled/enabled strings in linux/string_helpers.h
and use it in drivers and tomoyo.
- Clarify dma_fence_chain and dma_fence_array should never include eachother.
- Flatten chains in syncobj's.
- Don't double add in fbdev/defio when page is already enlisted.
- Don't sort deferred-I/O pages by default in fbdev.
Core Changes:
- Fix missing pm_runtime_put_sync in bridge.
- Set modifier support to only linear fb modifier if drivers don't
advertise support.
- As a result, we remove allow_fb_modifiers.
- Add missing clear for EDID Deep Color Modes in drm_reset_display_info.
- Assorted documentation updates.
- Warn once in drm_clflush if there is no arch support.
- Add missing select for dp helper in drm_panel_edp.
- Assorted small fixes.
- Improve fb-helper's clipping handling.
- Don't dump shmem mmaps in a core dump.
- Add accounting to ttm resource manager, and use it in amdgpu.
- Allow querying the detected eDP panel through debugfs.
- Add helpers for xrgb8888 to 8 and 1 bits gray.
- Improve drm's buddy allocator.
- Add selftests for the buddy allocator.
Driver Changes:
- Add support for nomodeset to a lot of drm drivers.
- Use drm_module_*_driver in a lot of drm drivers.
- Assorted small fixes to bridge/lt9611, v3d, vc4, vmwgfx, mxsfb, nouveau,
bridge/dw-hdmi, panfrost, lima, ingenic, sprd, bridge/anx7625, ti-sn65dsi86.
- Add bridge/it6505.
- Create DP and DVI-I connectors in ast.
- Assorted nouveau backlight fixes.
- Rework amdgpu reset handling.
- Add dt bindings for ingenic,jz4780-dw-hdmi.
- Support reading edid through aux channel in ingenic.
- Add a drm driver for Solomon SSD130x OLED displays.
- Add simple support for sharp LQ140M1JW46.
- Add more panels to nt35560.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/686ec871-e77f-c230-22e5-9e3bb80f064a@linux.intel.com
kstrdup() is a memory allocation function which can return NULL when
some internal memory errors happen. It is better to check the return
value of it to catch the error in time during the setup of viafb.
Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Fbdev's deferred I/O sorts all dirty pages by default, which incurs a
significant overhead. Make the sorting step optional and update the few
drivers that require it. Use a FIFO list by default.
Most fbdev drivers with deferred I/O build a bounding rectangle around
the dirty pages or simply flush the whole screen. The only two affected
DRM drivers, generic fbdev and vmwgfx, both use a bounding rectangle.
In those cases, the exact order of the pages doesn't matter. The other
drivers look at the page index or handle pages one-by-one. The patch
sets the sort_pagelist flag for those, even though some of them would
probably work correctly without sorting. Driver maintainers should update
their driver accordingly.
Sorting pages by memory offset for deferred I/O performs an implicit
bubble-sort step on the list of dirty pages. The algorithm goes through
the list of dirty pages and inserts each new page according to its
index field. Even worse, list traversal always starts at the first
entry. As video memory is most likely updated scanline by scanline, the
algorithm traverses through the complete list for each updated page.
For example, with 1024x768x32bpp each page covers exactly one scanline.
Writing a single screen update from top to bottom requires updating
768 pages. With an average list length of 384 entries, a screen update
creates (768 * 384 =) 294912 compare operation.
Fix this by making the sorting step opt-in and update the few drivers
that require it. All other drivers work with unsorted page lists. Pages
are appended to the list. Therefore, in the common case of writing the
framebuffer top to bottom, pages are still sorted by offset, which may
have a positive effect on performance.
Playing a video [1] in mplayer's benchmark mode shows the difference
(i7-4790, FullHD, simpledrm, kernel with debugging).
mplayer -benchmark -nosound -vo fbdev ./big_buck_bunny_720p_stereo.ogg
With sorted page lists:
BENCHMARKs: VC: 32.960s VO: 73.068s A: 0.000s Sys: 2.413s = 108.441s
BENCHMARK%: VC: 30.3947% VO: 67.3802% A: 0.0000% Sys: 2.2251% = 100.0000%
With unsorted page lists:
BENCHMARKs: VC: 31.005s VO: 42.889s A: 0.000s Sys: 2.256s = 76.150s
BENCHMARK%: VC: 40.7156% VO: 56.3219% A: 0.0000% Sys: 2.9625% = 100.0000%
VC shows the overhead of video decoding, VO shows the overhead of the
video output. Using unsorted page lists reduces the benchmark's run time
by ~32s/~25%.
v2:
* Make sorted pagelists the special case (Sam)
* Comment on drivers' use of pagelist (Sam)
* Warn about the overhead in comment
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://download.blender.org/peach/bigbuckbunny_movies/big_buck_bunny_720p_stereo.ogg # [1]
Link: https://patchwork.freedesktop.org/patch/msgid/20220211094640.21632-3-tzimmermann@suse.de
Return early if a page is already in the list of dirty pages for
deferred I/O. This can be detected if the page's list head is not
empty. Keep the list head initialized while the page is not enlisted
to make this work reliably.
v2:
* update comment and fix spelling (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220211094640.21632-2-tzimmermann@suse.de
Fix a misspelling of "palette" in a structure member.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Helge Deller <deller@gmx.de>
The code to set the shifter STe palette registers has a long
standing operator precedence bug, manifesting as colors set
on a 2 bits per pixel frame buffer coming up with a distinctive
blue tint.
Add parentheses around the calculation of the per-color palette
data before shifting those into their respective bit field position.
This bug goes back a long way (2.4 days at the very least) so there
won't be a Fixes: tag.
Tested on ARAnyM as well on Falcon030 hardware.
Cc: stable@vger.kernel.org
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/all/CAMuHMdU3ievhXxKR_xi_v3aumnYW7UNUO6qMdhgfyWTyVSsCkQ@mail.gmail.com
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
atafb_probe() overrides the atafb_ops.fb_setcolreg() method to match the
actual graphics hardware. Besides, the shifts by 8 were bogus, as the
individual .fb_setcolreg() implementations already take care of that.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Remove the custom macro up(), and convert the code to use the standard
round_up() helper instead.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Helge Deller <deller@gmx.de>
The horizontal resolution (640) for the TT High video mode (1280x960) is
definitely bogus. While fixing that, correct the timings to match the
TTM195 service manual.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Helge Deller <deller@gmx.de>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmIJZmoeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGZdoH/04d8zUhM3Fd3ACB
V/ONtOXmkfP2mEJSjb7cXTN1EM2SlOBdSnSsEw09FtGhjHABjOnLho4J5ixk9TH8
zNMNI3EMksM2T9KadHwxv8Vvp1LTrWRzMbws8tOCPA0RkOpikJfClC8CzRAyidJ3
cAbbDH/Jl1GnVZ8bpKmv2auYt+kNVGb0cwJ2W8phCwwkL7sLky5tgYeaGiJEXbJf
Tfi/3qtFdmYjD8wtYnCfzjnB7suG5nF7rGEnxCIxNi+IA4DieUv2c1KchuoaBfT9
df364VjKaGT3j+GB07ksQ/8mkwWiRXsCzOXAyMZSZaWjdMD4aAhCTJak5j7/TvGC
wtgHPww=
=/CMW
-----END PGP SIGNATURE-----
Backmerge tag 'v5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next
Daniel asked for this for some intel deps, so let's do it now.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Use sysfs_emit instead of scnprintf, snprintf or sprintf.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Jing Yao <yao.jing2@zte.com.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
Use sysfs_emit instead of scnprintf, snprintf or sprintf.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Jing Yao <yao.jing2@zte.com.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
Use sysfs_emit instead of scnprintf, snprintf or sprintf.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Jing Yao <yao.jing2@zte.com.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypassed the hierarchical setup and messed up the
irq chaining.
In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().
Signed-off-by: zhaoxiao <zhaoxiao@uniontech.com>
Signed-off-by: Helge Deller <deller@gmx.de>
The value returned by an spi driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)
So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Claudius Heine <ch@denx.de>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
Acked-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Acked-by: Łukasz Stelmach <l.stelmach@samsung.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220123175201.34839-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix this kernel test robot warning:
drivers/video/fbdev/core/fbcon.c: In function 'fbcon_init':
drivers/video/fbdev/core/fbcon.c:1028:6: warning: variable 'cap' set but not used [-Wunused-but-set-variable]
The cap variable is only used when CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION
is enabled. Drop the temporary variable and use info->flags instead.
Fixes: 87ab9f6b74 ("Revert "fbcon: Disable accelerated scrolling")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/YgFB4xqI+As196FR@p100
PM6150L contains WLED of version 5. Add support ofr it to the driver.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211229170358.2457006-3-luca.weiss@fairphone.com
kmalloc_array()/kcalloc() should be used to avoid potential overflow when
a multiplication is needed to compute the size of the requested memory.
So turn a kzalloc()+explicit size computation into an equivalent kcalloc().
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/bd3d74acfa58d59f6f5f81fc5a9fb409edb8d747.1644046817.git.christophe.jaillet@wanadoo.fr
