Merge KASAN updates from Andrew Morton.
This adds a new hardware tag-based mode to KASAN. The new mode is
similar to the existing software tag-based KASAN, but relies on arm64
Memory Tagging Extension (MTE) to perform memory and pointer tagging
(instead of shadow memory and compiler instrumentation).
By Andrey Konovalov and Vincenzo Frascino.
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (60 commits)
kasan: update documentation
kasan, mm: allow cache merging with no metadata
kasan: sanitize objects when metadata doesn't fit
kasan: clarify comment in __kasan_kfree_large
kasan: simplify assign_tag and set_tag calls
kasan: don't round_up too much
kasan, mm: rename kasan_poison_kfree
kasan, mm: check kasan_enabled in annotations
kasan: add and integrate kasan boot parameters
kasan: inline (un)poison_range and check_invalid_free
kasan: open-code kasan_unpoison_slab
kasan: inline random_tag for HW_TAGS
kasan: inline kasan_reset_tag for tag-based modes
kasan: remove __kasan_unpoison_stack
kasan: allow VMAP_STACK for HW_TAGS mode
kasan, arm64: unpoison stack only with CONFIG_KASAN_STACK
kasan: introduce set_alloc_info
kasan: rename get_alloc/free_info
kasan: simplify quarantine_put call site
kselftest/arm64: check GCR_EL1 after context switch
...
- Rework phys/virt translation
- Add KASan support
- Move DT out of linear map region
- Use more PC-relative addressing in assembly
- Remove FP emulation handling while in kernel mode
- Link with '-z norelro'
- remove old check for GCC <= 4.2 in ARM unwinder code
- disable big endian if using clang's linker
-----BEGIN PGP SIGNATURE-----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=fZGX
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux
Pull ARM updates from Russell King:
- Rework phys/virt translation
- Add KASan support
- Move DT out of linear map region
- Use more PC-relative addressing in assembly
- Remove FP emulation handling while in kernel mode
- Link with '-z norelro'
- remove old check for GCC <= 4.2 in ARM unwinder code
- disable big endian if using clang's linker
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (46 commits)
ARM: 9027/1: head.S: explicitly map DT even if it lives in the first physical section
ARM: 9038/1: Link with '-z norelro'
ARM: 9037/1: uncompress: Add OF_DT_MAGIC macro
ARM: 9036/1: uncompress: Fix dbgadtb size parameter name
ARM: 9035/1: uncompress: Add be32tocpu macro
ARM: 9033/1: arm/smp: Drop the macro S(x,s)
ARM: 9032/1: arm/mm: Convert PUD level pgtable helper macros into functions
ARM: 9031/1: hyp-stub: remove unused .L__boot_cpu_mode_offset symbol
ARM: 9044/1: vfp: use undef hook for VFP support detection
ARM: 9034/1: __div64_32(): straighten up inline asm constraints
ARM: 9030/1: entry: omit FP emulation for UND exceptions taken in kernel mode
ARM: 9029/1: Make iwmmxt.S support Clang's integrated assembler
ARM: 9028/1: disable KASAN in call stack capturing routines
ARM: 9026/1: unwind: remove old check for GCC <= 4.2
ARM: 9025/1: Kconfig: CPU_BIG_ENDIAN depends on !LD_IS_LLD
ARM: 9024/1: Drop useless cast of "u64" to "long long"
ARM: 9023/1: Spelling s/mmeory/memory/
ARM: 9022/1: Change arch/arm/lib/mem*.S to use WEAK instead of .weak
ARM: kvm: replace open coded VA->PA calculations with adr_l call
ARM: head.S: use PC relative insn sequence to calculate PHYS_OFFSET
...
- Fix DM verity to skip verity work if IO completes with error while
system is shutting down.
- Add new DM multipath "IO affinity" path selector that maps IO
destined to a given path to a specific CPU based on user provided
mapping.
- Rename DM multipath path selector source files to have "dm-ps"
prefix.
- Add REQ_NOWAIT support to some other simple DM targets that don't
block in more elaborate ways waiting for IO.
- Export DM crypt's kcryptd workqueue via sysfs (WQ_SYSFS).
- Fix error return code in DM's target_message() if empty message is
received.
- A handful of other small cleanups.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAl/iDJYTHHNuaXR6ZXJA
cmVkaGF0LmNvbQAKCRDFI/EKLZ0DWsI2CACUk9PCCtOOHH1s//VeLjF86VUIsuxf
hNMfTgWT+arlHUIzl2Bp4c4Dq/T+hXTYlf+f5zGRAbBAd82eCqji5LTVvy/qaYt3
4gWSZnv/3VYHCx4MvV9UjtXQcSnS/ttDwyV0ZD6/NtYllQQobaCbyrE4p2tA1GIk
ql8ESRgXKK5Sio197Tm45UEkrhG0oUrEZ3riBaXeM9yOldLp1mLLVPGJeLcJDvpA
N7TDcM0owq/CMbmu5BkNv0xw7q/Vc9VQLGva8a15StxGjk1HY5/6KQWssCEkTkO7
HnIprATtWz2r0qgTcI+fOXndUmlqgQr1jhvYfJeuv45KbjoI5qubZvYr
=vHNj
-----END PGP SIGNATURE-----
Merge tag 'for-5.11/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Add DM verity support for signature verification with 2nd keyring
- Fix DM verity to skip verity work if IO completes with error while
system is shutting down
- Add new DM multipath "IO affinity" path selector that maps IO
destined to a given path to a specific CPU based on user provided
mapping
- Rename DM multipath path selector source files to have "dm-ps" prefix
- Add REQ_NOWAIT support to some other simple DM targets that don't
block in more elaborate ways waiting for IO
- Export DM crypt's kcryptd workqueue via sysfs (WQ_SYSFS)
- Fix error return code in DM's target_message() if empty message is
received
- A handful of other small cleanups
* tag 'for-5.11/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm cache: simplify the return expression of load_mapping()
dm ebs: avoid double unlikely() notation when using IS_ERR()
dm verity: skip verity work if I/O error when system is shutting down
dm crypt: export sysfs of kcryptd workqueue
dm ioctl: fix error return code in target_message
dm crypt: Constify static crypt_iv_operations
dm: add support for REQ_NOWAIT to various targets
dm: rename multipath path selector source files to have "dm-ps" prefix
dm mpath: add IO affinity path selector
dm verity: Add support for signature verification with 2nd keyring
dm: remove unnecessary current->bio_list check when submitting split bio
The only patch in this series is removal of voltage and current reporting
for AMD Zen CPUs. Turns out that was not worth the trouble.
-----BEGIN PGP SIGNATURE-----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=uCAC
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v5.11-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull another hwmon update from Guenter Roeck:
"The only patch in this series is removal of voltage and current
reporting for AMD Zen CPUs.
Turns out that was not worth the trouble, because it's all
undocumented and not maintainable"
* tag 'hwmon-for-v5.11-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (k10temp) Remove support for displaying voltage and current on Zen CPUs
- support for a partial IOMMU bypass (Alexey Kardashevskiy)
- add a DMA API benchmark (Barry Song)
- misc fixes (Tiezhu Yang, tangjianqiang)
-----BEGIN PGP SIGNATURE-----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=dOug
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.11' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- support for a partial IOMMU bypass (Alexey Kardashevskiy)
- add a DMA API benchmark (Barry Song)
- misc fixes (Tiezhu Yang, tangjianqiang)
* tag 'dma-mapping-5.11' of git://git.infradead.org/users/hch/dma-mapping:
selftests/dma: add test application for DMA_MAP_BENCHMARK
dma-mapping: add benchmark support for streaming DMA APIs
dma-contiguous: fix a typo error in a comment
dma-pool: no need to check return value of debugfs_create functions
powerpc/dma: Fallback to dma_ops when persistent memory present
dma-mapping: Allow mixing bypass and mapped DMA operation
When a split lock is detected always make sure to disable interrupts
before returning from the trap handler.
The kernel exit code assumes that all exits run with interrupts
disabled, otherwise the SWAPGS sequence can race against interrupts and
cause recursing page faults and later panics.
The problem will only happen on CPUs with split lock disable
functionality, so Icelake Server, Tiger Lake, Snow Ridge, Jacobsville.
Fixes: ca4c6a9858 ("x86/traps: Make interrupt enable/disable symmetric in C code")
Fixes: bce9b042ec ("x86/traps: Disable interrupts in exc_aligment_check()") # v5.8+
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This change updates KASAN documentation to reflect the addition of boot
parameters and also reworks and clarifies some of the existing sections,
in particular: defines what a memory granule is, mentions quarantine,
makes Kunit section more readable.
Link: https://lkml.kernel.org/r/748daf013e17d925b0fe00c1c3b5dce726dd2430.1606162397.git.andreyknvl@google.com
Link: https://linux-review.googlesource.com/id/Ib1f83e91be273264b25f42b04448ac96b858849f
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The reason cache merging is disabled with KASAN is because KASAN puts its
metadata right after the allocated object. When the merged caches have
slightly different sizes, the metadata ends up in different places, which
KASAN doesn't support.
It might be possible to adjust the metadata allocation algorithm and make
it friendly to the cache merging code. Instead this change takes a simpler
approach and allows merging caches when no metadata is present. Which is
the case for hardware tag-based KASAN with kasan.mode=prod.
Link: https://lkml.kernel.org/r/37497e940bfd4b32c0a93a702a9ae4cf061d5392.1606162397.git.andreyknvl@google.com
Link: https://linux-review.googlesource.com/id/Ia114847dfb2244f297d2cb82d592bf6a07455dba
Co-developed-by: Vincenzo Frascino <Vincenzo.Frascino@arm.com>
Signed-off-by: Vincenzo Frascino <Vincenzo.Frascino@arm.com>
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
KASAN marks caches that are sanitized with the SLAB_KASAN cache flag.
Currently if the metadata that is appended after the object (stores e.g.
stack trace ids) doesn't fit into KMALLOC_MAX_SIZE (can only happen with
SLAB, see the comment in the patch), KASAN turns off sanitization
completely.
With this change sanitization of the object data is always enabled.
However the metadata is only stored when it fits. Instead of checking for
SLAB_KASAN flag accross the code to find out whether the metadata is
there, use cache->kasan_info.alloc/free_meta_offset. As 0 can be a valid
value for free_meta_offset, introduce KASAN_NO_FREE_META as an indicator
that the free metadata is missing.
Without this change all sanitized KASAN objects would be put into
quarantine with generic KASAN. With this change, only the objects that
have metadata (i.e. when it fits) are put into quarantine, the rest is
freed right away.
Along the way rework __kasan_cache_create() and add claryfying comments.
Link: https://lkml.kernel.org/r/aee34b87a5e4afe586c2ac6a0b32db8dc4dcc2dc.1606162397.git.andreyknvl@google.com
Link: https://linux-review.googlesource.com/id/Icd947e2bea054cb5cfbdc6cf6652227d97032dcb
Co-developed-by: Vincenzo Frascino <Vincenzo.Frascino@arm.com>
Signed-off-by: Vincenzo Frascino <Vincenzo.Frascino@arm.com>
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
set_tag() already ignores the tag for the generic mode, so just call it
as is. Add a check for the generic mode to assign_tag(), and simplify its
call in ____kasan_kmalloc().
Link: https://lkml.kernel.org/r/121eeab245f98555862b289d2ba9269c868fbbcf.1606162397.git.andreyknvl@google.com
Link: https://linux-review.googlesource.com/id/I18905ca78fb4a3d60e1a34a4ca00247272480438
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Declare the kasan_enabled static key in include/linux/kasan.h and in
include/linux/mm.h and check it in all kasan annotations. This allows to
avoid any slowdown caused by function calls when kasan_enabled is
disabled.
Link: https://lkml.kernel.org/r/9f90e3c0aa840dbb4833367c2335193299f69023.1606162397.git.andreyknvl@google.com
Link: https://linux-review.googlesource.com/id/I2589451d3c96c97abbcbf714baabe6161c6f153e
Co-developed-by: Vincenzo Frascino <Vincenzo.Frascino@arm.com>
Signed-off-by: Vincenzo Frascino <Vincenzo.Frascino@arm.com>
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hardware tag-based KASAN mode is intended to eventually be used in
production as a security mitigation. Therefore there's a need for finer
control over KASAN features and for an existence of a kill switch.
This change adds a few boot parameters for hardware tag-based KASAN that
allow to disable or otherwise control particular KASAN features.
The features that can be controlled are:
1. Whether KASAN is enabled at all.
2. Whether KASAN collects and saves alloc/free stacks.
3. Whether KASAN panics on a detected bug or not.
With this change a new boot parameter kasan.mode allows to choose one of
three main modes:
- kasan.mode=off - KASAN is disabled, no tag checks are performed
- kasan.mode=prod - only essential production features are enabled
- kasan.mode=full - all KASAN features are enabled
The chosen mode provides default control values for the features mentioned
above. However it's also possible to override the default values by
providing:
- kasan.stacktrace=off/on - enable alloc/free stack collection
(default: on for mode=full, otherwise off)
- kasan.fault=report/panic - only report tag fault or also panic
(default: report)
If kasan.mode parameter is not provided, it defaults to full when
CONFIG_DEBUG_KERNEL is enabled, and to prod otherwise.
It is essential that switching between these modes doesn't require
rebuilding the kernel with different configs, as this is required by
the Android GKI (Generic Kernel Image) initiative [1].
[1] https://source.android.com/devices/architecture/kernel/generic-kernel-image
[andreyknvl@google.com: don't use read-only static keys]
Link: https://lkml.kernel.org/r/f2ded589eba1597f7360a972226083de9afd86e2.1607537948.git.andreyknvl@google.com
Link: https://lkml.kernel.org/r/cb093613879d8d8841173f090133eddeb4c35f1f.1606162397.git.andreyknvl@google.com
Link: https://linux-review.googlesource.com/id/If7d37003875b2ed3e0935702c8015c223d6416a4
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Using (un)poison_range() or check_invalid_free() currently results in
function calls. Move their definitions to mm/kasan/kasan.h and turn them
into static inline functions for hardware tag-based mode to avoid
unneeded function calls.
Link: https://lkml.kernel.org/r/7007955b69eb31b5376a7dc1e0f4ac49138504f2.1606162397.git.andreyknvl@google.com
Link: https://linux-review.googlesource.com/id/Ia9d8191024a12d1374675b3d27197f10193f50bb
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There's the external annotation kasan_unpoison_slab() that is currently
defined as static inline and uses kasan_unpoison_range(). Open-code this
function in mempool.c. Otherwise with an upcoming change this function
will result in an unnecessary function call.
Link: https://lkml.kernel.org/r/131a6694a978a9a8b150187e539eecc8bcbf759b.1606162397.git.andreyknvl@google.com
Link: https://linux-review.googlesource.com/id/Ia7c8b659f79209935cbaab3913bf7f082cc43a0e
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Using random_tag() currently results in a function call. Move its
definition to mm/kasan/kasan.h and turn it into a static inline function
for hardware tag-based mode to avoid uneeded function calls.
Link: https://lkml.kernel.org/r/be438471690e351e1d792e6bb432e8c03ccb15d3.1606162397.git.andreyknvl@google.com
Link: https://linux-review.googlesource.com/id/Iac5b2faf9a912900e16cca6834d621f5d4abf427
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Using kasan_reset_tag() currently results in a function call. As it's
called quite often from the allocator code, this leads to a noticeable
slowdown. Move it to include/linux/kasan.h and turn it into a static
inline function. Also remove the now unneeded reset_tag() internal KASAN
macro and use kasan_reset_tag() instead.
Link: https://lkml.kernel.org/r/6940383a3a9dfb416134d338d8fac97a9ebb8686.1606162397.git.andreyknvl@google.com
Link: https://linux-review.googlesource.com/id/I4d2061acfe91d480a75df00b07c22d8494ef14b5
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There's no need for __kasan_unpoison_stack() helper, as it's only
currently used in a single place. Removing it also removes unneeded
arithmetic.
No functional changes.
Link: https://lkml.kernel.org/r/93e78948704a42ea92f6248ff8a725613d721161.1606162397.git.andreyknvl@google.com
Link: https://linux-review.googlesource.com/id/Ie5ba549d445292fe629b4a96735e4034957bcc50
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There's a config option CONFIG_KASAN_STACK that has to be enabled for
KASAN to use stack instrumentation and perform validity checks for
stack variables.
There's no need to unpoison stack when CONFIG_KASAN_STACK is not enabled.
Only call kasan_unpoison_task_stack[_below]() when CONFIG_KASAN_STACK is
enabled.
Note, that CONFIG_KASAN_STACK is an option that is currently always
defined when CONFIG_KASAN is enabled, and therefore has to be tested
with #if instead of #ifdef.
Link: https://lkml.kernel.org/r/d09dd3f8abb388da397fd11598c5edeaa83fe559.1606162397.git.andreyknvl@google.com
Link: https://linux-review.googlesource.com/id/If8a891e9fe01ea543e00b576852685afec0887e3
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "kasan: boot parameters for hardware tag-based mode", v4.
=== Overview
Hardware tag-based KASAN mode [1] is intended to eventually be used in
production as a security mitigation. Therefore there's a need for finer
control over KASAN features and for an existence of a kill switch.
This patchset adds a few boot parameters for hardware tag-based KASAN that
allow to disable or otherwise control particular KASAN features, as well
as provides some initial optimizations for running KASAN in production.
There's another planned patchset what will further optimize hardware
tag-based KASAN, provide proper benchmarking and tests, and will fully
enable tag-based KASAN for production use.
Hardware tag-based KASAN relies on arm64 Memory Tagging Extension (MTE)
[2] to perform memory and pointer tagging. Please see [3] and [4] for
detailed analysis of how MTE helps to fight memory safety problems.
The features that can be controlled are:
1. Whether KASAN is enabled at all.
2. Whether KASAN collects and saves alloc/free stacks.
3. Whether KASAN panics on a detected bug or not.
The patch titled "kasan: add and integrate kasan boot parameters" of this
series adds a few new boot parameters.
kasan.mode allows to choose one of three main modes:
- kasan.mode=off - KASAN is disabled, no tag checks are performed
- kasan.mode=prod - only essential production features are enabled
- kasan.mode=full - all KASAN features are enabled
The chosen mode provides default control values for the features mentioned
above. However it's also possible to override the default values by
providing:
- kasan.stacktrace=off/on - enable stacks collection
(default: on for mode=full, otherwise off)
- kasan.fault=report/panic - only report tag fault or also panic
(default: report)
If kasan.mode parameter is not provided, it defaults to full when
CONFIG_DEBUG_KERNEL is enabled, and to prod otherwise.
It is essential that switching between these modes doesn't require
rebuilding the kernel with different configs, as this is required by
the Android GKI (Generic Kernel Image) initiative.
=== Benchmarks
For now I've only performed a few simple benchmarks such as measuring
kernel boot time and slab memory usage after boot. There's an upcoming
patchset which will optimize KASAN further and include more detailed
benchmarking results.
The benchmarks were performed in QEMU and the results below exclude the
slowdown caused by QEMU memory tagging emulation (as it's different from
the slowdown that will be introduced by hardware and is therefore
irrelevant).
KASAN_HW_TAGS=y + kasan.mode=off introduces no performance or memory
impact compared to KASAN_HW_TAGS=n.
kasan.mode=prod (manually excluding tagging) introduces 3% of performance
and no memory impact (except memory used by hardware to store tags)
compared to kasan.mode=off.
kasan.mode=full has about 40% performance and 30% memory impact over
kasan.mode=prod. Both come from alloc/free stack collection.
=== Notes
This patchset is available here:
https://github.com/xairy/linux/tree/up-boot-mte-v4
This patchset is based on v11 of "kasan: add hardware tag-based mode for
arm64" patchset [1].
For testing in QEMU hardware tag-based KASAN requires:
1. QEMU built from master [6] (use "-machine virt,mte=on -cpu max" arguments
to run).
2. GCC version 10.
[1] https://lore.kernel.org/linux-arm-kernel/cover.1606161801.git.andreyknvl@google.com/T/#t
[2] https://community.arm.com/developer/ip-products/processors/b/processors-ip-blog/posts/enhancing-memory-safety
[3] https://arxiv.org/pdf/1802.09517.pdf
[4] https://github.com/microsoft/MSRC-Security-Research/blob/master/papers/2020/Security%20analysis%20of%20memory%20tagging.pdf
[5] https://source.android.com/devices/architecture/kernel/generic-kernel-image
[6] https://github.com/qemu/qemu
=== Tags
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
This patch (of 19):
Move get_free_info() call into quarantine_put() to simplify the call site.
No functional changes.
Link: https://lkml.kernel.org/r/cover.1606162397.git.andreyknvl@google.com
Link: https://lkml.kernel.org/r/312d0a3ef92cc6dc4fa5452cbc1714f9393ca239.1606162397.git.andreyknvl@google.com
Link: https://linux-review.googlesource.com/id/Iab0f04e7ebf8d83247024b7190c67c3c34c7940f
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This test is specific to MTE and verifies that the GCR_EL1 register is
context switched correctly.
It spawns 1024 processes and each process spawns 5 threads. Each thread
writes a random setting of GCR_EL1 through the prctl() system call and
reads it back verifying that it is the same. If the values are not the
same it reports a failure.
Note: The test has been extended to verify that even SYNC and ASYNC mode
setting is preserved correctly over context switching.
Link: https://lkml.kernel.org/r/b51a165426e906e7ec8a68d806ef3f8cd92581a6.1606161801.git.andreyknvl@google.com
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kernel allocator code accesses metadata for slab objects, that may lie
out-of-bounds of the object itself, or be accessed when an object is
freed. Such accesses trigger tag faults and lead to false-positive
reports with hardware tag-based KASAN.
Software KASAN modes disable instrumentation for allocator code via
KASAN_SANITIZE Makefile macro, and rely on kasan_enable/disable_current()
annotations which are used to ignore KASAN reports.
With hardware tag-based KASAN neither of those options are available, as
it doesn't use compiler instrumetation, no tag faults are ignored, and MTE
is disabled after the first one.
Instead, reset tags when accessing metadata (currently only for SLUB).
Link: https://lkml.kernel.org/r/a0f3cefbc49f34c843b664110842de4db28179d0.1606161801.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Acked-by: Marco Elver <elver@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add error reporting for hardware tag-based KASAN. When
CONFIG_KASAN_HW_TAGS is enabled, print KASAN report from the arm64 tag
fault handler.
SAS bits aren't set in ESR for all faults reported in EL1, so it's
impossible to find out the size of the access the caused the fault. Adapt
KASAN reporting code to handle this case.
Link: https://lkml.kernel.org/r/b559c82b6a969afedf53b4694b475f0234067a1a.1606161801.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Co-developed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Provide implementation of KASAN functions required for the hardware
tag-based mode. Those include core functions for memory and pointer
tagging (tags_hw.c) and bug reporting (report_tags_hw.c). Also adapt
common KASAN code to support the new mode.
Link: https://lkml.kernel.org/r/cfd0fbede579a6b66755c98c88c108e54f9c56bf.1606161801.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With the intoduction of hardware tag-based KASAN some kernel checks of
this kind:
ifdef CONFIG_KASAN
will be updated to:
if defined(CONFIG_KASAN_GENERIC) || defined(CONFIG_KASAN_SW_TAGS)
x86 and s390 use a trick to #undef CONFIG_KASAN for some of the code
that isn't linked with KASAN runtime and shouldn't have any KASAN
annotations.
Also #undef CONFIG_KASAN_GENERIC with CONFIG_KASAN.
Link: https://lkml.kernel.org/r/9d84bfaaf8fabe0fc89f913c9e420a30bd31a260.1606161801.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Marco Elver <elver@google.com>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch add a set of arch_*() memory tagging helpers currently only
defined for arm64 when hardware tag-based KASAN is enabled. These helpers
will be used by KASAN runtime to implement the hardware tag-based mode.
The arch-level indirection level is introduced to simplify adding hardware
tag-based KASAN support for other architectures in the future by defining
the appropriate arch_*() macros.
Link: https://lkml.kernel.org/r/fc9e5bb71201c03131a2fc00a74125723568dda9.1606161801.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Co-developed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
free_reserved_area() memsets the pages belonging to a given memory area.
As that memory hasn't been allocated via page_alloc, the KASAN tags that
those pages have are 0x00. As the result the memset might result in a tag
mismatch.
Untag the address to avoid spurious faults.
Link: https://lkml.kernel.org/r/ebef6425f4468d063e2f09c1b62ccbb2236b71d3.1606161801.git.andreyknvl@google.com
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When MTE is present, the GCR_EL1 register contains the tags mask that
allows to exclude tags from the random generation via the IRG instruction.
With the introduction of the new Tag-Based KASAN API that provides a
mechanism to reserve tags for special reasons, the MTE implementation has
to make sure that the GCR_EL1 setting for the kernel does not affect the
userspace processes and viceversa.
Save and restore the kernel/user mask in GCR_EL1 in kernel entry and exit.
Link: https://lkml.kernel.org/r/578b03294708cc7258fad0dc9c2a2e809e5a8214.1606161801.git.andreyknvl@google.com
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Co-developed-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The gcr_user mask is a per thread mask that represents the tags that are
excluded from random generation when the Memory Tagging Extension is
present and an 'irg' instruction is invoked.
gcr_user affects the behavior on EL0 only.
Currently that mask is an include mask and it is controlled by the user
via prctl() while GCR_EL1 accepts an exclude mask.
Convert the include mask into an exclude one to make it easier the
register setting.
Note: This change will affect gcr_kernel (for EL1) introduced with a
future patch.
Link: https://lkml.kernel.org/r/946dd31be833b660334c4f93410acf6d6c4cf3c4.1606161801.git.andreyknvl@google.com
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hardware tag-based KASAN relies on Memory Tagging Extension (MTE) feature
and requires it to be enabled. MTE supports
This patch adds a new mte_enable_kernel() helper, that enables MTE in
Synchronous mode in EL1 and is intended to be called from KASAN runtime
during initialization.
The Tag Checking operation causes a synchronous data abort as a
consequence of a tag check fault when MTE is configured in synchronous
mode.
As part of this change enable match-all tag for EL1 to allow the kernel to
access user pages without faulting. This is required because the kernel
does not have knowledge of the tags set by the user in a page.
Note: For MTE, the TCF bit field in SCTLR_EL1 affects only EL1 in a
similar way as TCF0 affects EL0.
MTE that is built on top of the Top Byte Ignore (TBI) feature hence we
enable it as part of this patch as well.
Link: https://lkml.kernel.org/r/7352b0a0899af65c2785416c8ca6bf3845b66fa1.1606161801.git.andreyknvl@google.com
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Co-developed-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add the implementation of the in-kernel fault handler.
When a tag fault happens on a kernel address:
* MTE is disabled on the current CPU,
* the execution continues.
When a tag fault happens on a user address:
* the kernel executes do_bad_area() and panics.
The tag fault handler for kernel addresses is currently empty and will be
filled in by a future commit.
Link: https://lkml.kernel.org/r/20201203102628.GB2224@gaia
Link: https://lkml.kernel.org/r/ad31529b073e22840b7a2246172c2b67747ed7c4.1606161801.git.andreyknvl@google.com
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Co-developed-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
[catalin.marinas@arm.com: ensure CONFIG_ARM64_PAN is enabled with MTE]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The hardware tag-based KASAN for compatibility with the other modes stores
the tag associated to a page in page->flags. Due to this the kernel
faults on access when it allocates a page with an initial tag and the user
changes the tags.
Reset the tag associated by the kernel to a page in all the meaningful
places to prevent kernel faults on access.
Note: An alternative to this approach could be to modify page_to_virt().
This though could end up being racy, in fact if a CPU checks the
PG_mte_tagged bit and decides that the page is not tagged but another CPU
maps the same with PROT_MTE and becomes tagged the subsequent kernel
access would fail.
Link: https://lkml.kernel.org/r/9073d4e973747a6f78d5bdd7ebe17f290d087096.1606161801.git.andreyknvl@google.com
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Provide helper functions to manipulate allocation and pointer tags for
kernel addresses.
Low-level helper functions (mte_assign_*, written in assembly) operate tag
values from the [0x0, 0xF] range. High-level helper functions
(mte_get/set_*) use the [0xF0, 0xFF] range to preserve compatibility with
normal kernel pointers that have 0xFF in their top byte.
MTE_GRANULE_SIZE and related definitions are moved to mte-def.h header
that doesn't have any dependencies and is safe to include into any
low-level header.
Link: https://lkml.kernel.org/r/c31bf759b4411b2d98cdd801eb928e241584fd1f.1606161801.git.andreyknvl@google.com
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Co-developed-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is a preparatory commit for the upcoming addition of a new hardware
tag-based (MTE-based) KASAN mode.
Rework print_memory_metadata() to make it agnostic with regard to the way
metadata is stored. Allow providing a separate metadata_fetch_row()
implementation for each KASAN mode. Hardware tag-based KASAN will provide
its own implementation that doesn't use shadow memory.
No functional changes for software modes.
Link: https://lkml.kernel.org/r/5fb1ec0152bb1f521505017800387ec3e36ffe18.1606161801.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is a preparatory commit for the upcoming addition of a new hardware
tag-based (MTE-based) KASAN mode.
Hardware tag-based KASAN won't be using shadow memory, but will reuse
these macros. Rename "SHADOW" to implementation-neutral "META".
No functional changes.
Link: https://lkml.kernel.org/r/f96244ec59dc17db35173ec352c5592b14aefaf8.1606161801.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is a preparatory commit for the upcoming addition of a new hardware
tag-based (MTE-based) KASAN mode.
Hardware tag-based KASAN won't be using shadow memory, but will reuse this
function. Rename "shadow" to implementation-neutral "metadata".
No functional changes.
Link: https://lkml.kernel.org/r/dd955c5aadaee16aef451a6189d19172166a23f5.1606161801.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
