Provide descriptions for the functions invoking the EFI_RNG_PROTOCOL.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Link: https://lore.kernel.org/r/20200221114716.4372-1-xypron.glpk@gmx.de
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Update the description of of efi_relocate_kernel() to match Sphinx style.
Update parameter references in the description of other memory functions
to use @param style.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20200220065317.9096-1-xypron.glpk@gmx.de
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Add the protocol definitions, GUIDs and mixed mode glue so that
the EFI loadfile protocol can be used from the stub. This will
be used in a future patch to load the initrd.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
We will be adding support for loading the initrd from a GUIDed
device path in a subsequent patch, so update the prototype of
the LocateDevicePath() boot service to make it callable from
our code.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
We currently parse the command non-destructively, to avoid having to
allocate memory for a copy before passing it to the standard parsing
routines that are used by the core kernel, and which modify the input
to delineate the parsed tokens with NUL characters.
Instead, we call strstr() and strncmp() to go over the input multiple
times, and match prefixes rather than tokens, which implies that we
would match, e.g., 'nokaslrfoo' in the stub and disable KASLR, while
the kernel would disregard the option and run with KASLR enabled.
In order to avoid having to reason about whether and how this behavior
may be abused, let's clean up the parsing routines, and rebuild them
on top of the existing helpers.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
On x86, the preferred load address of the initrd is still below 4 GB,
even though in some cases, we can cope with an initrd that is loaded
above that.
To simplify the code, and to make it more straightforward to introduce
other ways to load the initrd, pass the soft and hard memory limits at
the same time, and let the code handling the initrd= command line option
deal with this.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The file I/O routine that is used to load initrd or dtb files from
the EFI system partition suffers from a few issues:
- it converts the u8[] command line back to a UTF-16 string, which is
pointless since we only handle initrd or dtb arguments provided via
the loaded image protocol anyway, which is where we got the UTF-16[]
command line from in the first place when booting via the PE entry
point,
- in the far majority of cases, only a single initrd= option is present,
but it optimizes for multiple options, by going over the command line
twice, allocating heap buffers for dynamically sized arrays, etc.
- the coding style is hard to follow, with few comments, and all logic
including string parsing etc all combined in a single routine.
Let's fix this by rewriting most of it, based on the idea that in the
case of multiple initrds, we can just allocate a new, bigger buffer
and copy over the data before freeing the old one.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Split off the file I/O support code into a separate source file so
it ends up in a separate object file in the static library, allowing
the linker to omit it if the routines are not used.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
efi_random_alloc() is only used on arm64, but as it shares a source
file with efi_random_get_seed(), the latter will pull in the former
on other architectures as well.
Let's take advantage of the fact that libstub is a static library,
and so the linker will only incorporate objects that are needed to
satisfy dependencies in other objects. This means we can move the
random alloc code to a separate source file that gets built
unconditionally, but only used when needed.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
We now support cmdline data that is located in memory that is not
32-bit addressable, so relax the allocation limit on systems where
this feature is enabled.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Move all the declarations that are only used in stub code from
linux/efi.h to efistub.h which is only included locally.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
We now support bootparams structures that are located in memory that
is not 32-bit addressable, so relax the allocation limit on systems
where this feature is enabled.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Align the naming of efi_file_io_interface_t and efi_file_handle_t with
the UEFI spec, and call them efi_simple_file_system_protocol_t and
efi_file_protocol_t, respectively, using the same convention we use
for all other type definitions that originate in the UEFI spec.
While at it, move the definitions to efistub.h, so they are only seen
by code that needs them.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Most of the EFI stub source files of all architectures reside under
drivers/firmware/efi/libstub, where they share a Makefile with special
CFLAGS and an include file with declarations that are only relevant
for stub code.
Currently, we carry a lot of stub specific stuff in linux/efi.h only
because eboot.c in arch/x86 needs them as well. So let's move eboot.c
into libstub/, and move the contents of eboot.h that we still care
about into efistub.h
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The implementation of efi_high_alloc() uses a complicated way of
traversing the memory map to find an available region that is located
as close as possible to the provided upper limit, and calls AllocatePages
subsequently to create the allocation at that exact address.
This is precisely what the EFI_ALLOCATE_MAX_ADDRESS allocation type
argument to AllocatePages() does, and considering that EFI_ALLOC_ALIGN
only exceeds EFI_PAGE_SIZE on arm64, let's use AllocatePages() directly
and implement the alignment using code that the compiler can remove if
it does not exceed EFI_PAGE_SIZE.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Create a new source file mem.c to keep the routines involved in memory
allocation and deallocation and manipulation of the EFI memory map.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The arm64 kernel no longer requires the FDT blob to fit inside a
naturally aligned 2 MB memory block, so remove the code that aligns
the allocation to 2 MB.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Instead of setting the visibility pragma for a small set of symbol
declarations that could result in absolute references that we cannot
support in the stub, declare hidden visibility for all code in the
EFI stub, which is more robust and future proof.
To ensure that the #pragma is taken into account before any other
includes are processed, put it in a header file of its own and
include it via the compiler command line using the -include option.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertenly introduced[3] to the codebase from now on.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Link: https://lore.kernel.org/r/20200211231421.GA15697@embeddedor
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The UEFI spec defines (and deprecates) a misguided and shortlived
memory protection feature that is based on splitting memory regions
covering PE/COFF executables into separate code and data regions,
without annotating them as belonging to the same executable image.
When the OS assigns the virtual addresses of these regions, it may
move them around arbitrarily, without taking into account that the
PE/COFF code sections may contain relative references into the data
sections, which means the relative placement of these segments has
to be preserved or the executable image will be corrupted.
The original workaround on arm64 was to ensure that adjacent regions
of the same type were mapped adjacently in the virtual mapping, but
this requires sorting of the memory map, which we would prefer to
avoid.
Considering that the native physical mapping of the PE/COFF images
does not suffer from this issue, let's preserve it at runtime, and
install it as the virtual mapping as well.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Some (somewhat older) laptops have a correct BGRT table, except that the
version field is 0 instead of 1.
This has been seen on several Ivy Bridge based Lenovo models.
For now the spec. only defines version 1, so it is reasonably safe to
assume that tables with a version of 0 really are version 1 too,
which is what this commit does so that the BGRT table will be accepted
by the kernel on laptop models with this issue.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200131130623.33875-1-hdegoede@redhat.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Expose efi_entry() as the PE/COFF entrypoint directly, instead of
jumping into a wrapper that fiddles with stack buffers and other
stuff that the compiler is much better at. The only reason this
code exists is to obtain a pointer to the base of the image, but
we can get the same value from the loaded_image protocol, which
we already need for other reasons anyway.
Update the return type as well, to make it consistent with what
is required for a PE/COFF executable entrypoint.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Now walk_page_range() can walk kernel page tables, we can switch the arm64
ptdump code over to using it, simplifying the code.
Link: http://lkml.kernel.org/r/20191218162402.45610-22-steven.price@arm.com
Signed-off-by: Steven Price <steven.price@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Liang, Kan" <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zong Li <zong.li@sifive.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull EFI updates from Ingo Molnar:
"The main changes in this cycle were:
- Cleanup of the GOP [graphics output] handling code in the EFI stub
- Complete refactoring of the mixed mode handling in the x86 EFI stub
- Overhaul of the x86 EFI boot/runtime code
- Increase robustness for mixed mode code
- Add the ability to disable DMA at the root port level in the EFI
stub
- Get rid of RWX mappings in the EFI memory map and page tables,
where possible
- Move the support code for the old EFI memory mapping style into its
only user, the SGI UV1+ support code.
- plus misc fixes, updates, smaller cleanups.
... and due to interactions with the RWX changes, another round of PAT
cleanups make a guest appearance via the EFI tree - with no side
effects intended"
* 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (75 commits)
efi/x86: Disable instrumentation in the EFI runtime handling code
efi/libstub/x86: Fix EFI server boot failure
efi/x86: Disallow efi=old_map in mixed mode
x86/boot/compressed: Relax sed symbol type regex for LLVM ld.lld
efi/x86: avoid KASAN false positives when accessing the 1: 1 mapping
efi: Fix handling of multiple efi_fake_mem= entries
efi: Fix efi_memmap_alloc() leaks
efi: Add tracking for dynamically allocated memmaps
efi: Add a flags parameter to efi_memory_map
efi: Fix comment for efi_mem_type() wrt absent physical addresses
efi/arm: Defer probe of PCIe backed efifb on DT systems
efi/x86: Limit EFI old memory map to SGI UV machines
efi/x86: Avoid RWX mappings for all of DRAM
efi/x86: Don't map the entire kernel text RW for mixed mode
x86/mm: Fix NX bit clearing issue in kernel_map_pages_in_pgd
efi/libstub/x86: Fix unused-variable warning
efi/libstub/x86: Use mandatory 16-byte stack alignment in mixed mode
efi/libstub/x86: Use const attribute for efi_is_64bit()
efi: Allow disabling PCI busmastering on bridges during boot
efi/x86: Allow translating 64-bit arguments for mixed mode calls
...
Pull header cleanup from Ingo Molnar:
"This is a treewide cleanup, mostly (but not exclusively) with x86
impact, which breaks implicit dependencies on the asm/realtime.h
header and finally removes it from asm/acpi.h"
* 'core-headers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ACPI/sleep: Move acpi_get_wakeup_address() into sleep.c, remove <asm/realmode.h> from <asm/acpi.h>
ACPI/sleep: Convert acpi_wakeup_address into a function
x86/ACPI/sleep: Remove an unnecessary include of asm/realmode.h
ASoC: Intel: Skylake: Explicitly include linux/io.h for virt_to_phys()
vmw_balloon: Explicitly include linux/io.h for virt_to_phys()
virt: vbox: Explicitly include linux/io.h to pick up various defs
efi/capsule-loader: Explicitly include linux/io.h for page_to_phys()
perf/x86/intel: Explicitly include asm/io.h to use virt_to_phys()
x86/kprobes: Explicitly include vmalloc.h for set_vm_flush_reset_perms()
x86/ftrace: Explicitly include vmalloc.h for set_vm_flush_reset_perms()
x86/boot: Explicitly include realmode.h to handle RM reservations
x86/efi: Explicitly include realmode.h to handle RM trampoline quirk
x86/platform/intel/quark: Explicitly include linux/io.h for virt_to_phys()
x86/setup: Enhance the comments
x86/setup: Clean up the header portion of setup.c
Dave noticed that when specifying multiple efi_fake_mem= entries only
the last entry was successfully being reflected in the efi memory map.
This is due to the fact that the efi_memmap_insert() is being called
multiple times, but on successive invocations the insertion should be
applied to the last new memmap rather than the original map at
efi_fake_memmap() entry.
Rework efi_fake_memmap() to install the new memory map after each
efi_fake_mem= entry is parsed.
This also fixes an issue in efi_fake_memmap() that caused it to litter
emtpy entries into the end of the efi memory map. An empty entry causes
efi_memmap_insert() to attempt more memmap splits / copies than
efi_memmap_split_count() accounted for when sizing the new map. When
that happens efi_memmap_insert() may overrun its allocation, and if you
are lucky will spill over to an unmapped page leading to crash
signature like the following rather than silent corruption:
BUG: unable to handle page fault for address: ffffffffff281000
[..]
RIP: 0010:efi_memmap_insert+0x11d/0x191
[..]
Call Trace:
? bgrt_init+0xbe/0xbe
? efi_arch_mem_reserve+0x1cb/0x228
? acpi_parse_bgrt+0xa/0xd
? acpi_table_parse+0x86/0xb8
? acpi_boot_init+0x494/0x4e3
? acpi_parse_x2apic+0x87/0x87
? setup_acpi_sci+0xa2/0xa2
? setup_arch+0x8db/0x9e1
? start_kernel+0x6a/0x547
? secondary_startup_64+0xb6/0xc0
Commit af16489848 "x86/efi: Update e820 with reserved EFI boot
services data to fix kexec breakage" introduced more occurrences where
efi_memmap_insert() is invoked after an efi_fake_mem= configuration has
been parsed. Previously the side effects of vestigial empty entries were
benign, but with commit af16489848 that follow-on efi_memmap_insert()
invocation triggers efi_memmap_insert() overruns.
Reported-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20191231014630.GA24942@dhcp-128-65.nay.redhat.com
Link: https://lore.kernel.org/r/20200113172245.27925-14-ardb@kernel.org
With efi_fake_memmap() and efi_arch_mem_reserve() the efi table may be
updated and replaced multiple times. When that happens a previous
dynamically allocated efi memory map can be garbage collected. Use the
new EFI_MEMMAP_{SLAB,MEMBLOCK} flags to detect when a dynamically
allocated memory map is being replaced.
Debug statements in efi_memmap_free() reveal:
efi: __efi_memmap_free:37: phys: 0x23ffdd580 size: 2688 flags: 0x2
efi: __efi_memmap_free:37: phys: 0x9db00 size: 2640 flags: 0x2
efi: __efi_memmap_free:37: phys: 0x9e580 size: 2640 flags: 0x2
...a savings of 7968 bytes on a qemu boot with 2 entries specified to
efi_fake_mem=.
[ ardb: added a comment to clarify that efi_memmap_free() does nothing when
called from efi_clean_memmap(), i.e., with data->flags == 0x0 ]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200113172245.27925-13-ardb@kernel.org
In preparation for fixing efi_memmap_alloc() leaks, add support for
recording whether the memmap was dynamically allocated from slab,
memblock, or is the original physical memmap provided by the platform.
Given this tracking is established in efi_memmap_alloc() and needs to be
carried to efi_memmap_install(), use 'struct efi_memory_map_data' to
convey the flags.
Some small cleanups result from this reorganization, specifically the
removal of local variables for 'phys' and 'size' that are already
tracked in @data.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200113172245.27925-12-ardb@kernel.org
In preparation for garbage collecting dynamically allocated EFI memory
maps, where the allocation method of memblock vs slab needs to be
recalled, convert the existing 'late' flag into a 'flags' bitmask.
Arrange for the flag to be passed via 'struct efi_memory_map_data'. This
structure grows additional flags in follow-on changes.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200113172245.27925-11-ardb@kernel.org
A previous commit f99afd08a4 ("efi: Update efi_mem_type() to return an
error rather than 0") changed the return value from EFI_RESERVED_TYPE to
-EINVAL when the searched physical address is not present in any memory
descriptor. But the comment preceding the function never changed. Let's
change the comment now to reflect the new return value -EINVAL.
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200113172245.27925-10-ardb@kernel.org
The new of_devlink support breaks PCIe probing on ARM platforms booting
via UEFI if the firmware exposes a EFI framebuffer that is backed by a
PCI device. The reason is that the probing order gets reversed,
resulting in a resource conflict on the framebuffer memory window when
the PCIe probes last, causing it to give up entirely.
Given that we rely on PCI quirks to deal with EFI framebuffers that get
moved around in memory, we cannot simply drop the memory reservation, so
instead, let's use the device link infrastructure to register this
dependency, and force the probing to occur in the expected order.
Co-developed-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200113172245.27925-9-ardb@kernel.org
Add an option to disable the busmaster bit in the control register on
all PCI bridges before calling ExitBootServices() and passing control
to the runtime kernel. System firmware may configure the IOMMU to prevent
malicious PCI devices from being able to attack the OS via DMA. However,
since firmware can't guarantee that the OS is IOMMU-aware, it will tear
down IOMMU configuration when ExitBootServices() is called. This leaves
a window between where a hostile device could still cause damage before
Linux configures the IOMMU again.
If CONFIG_EFI_DISABLE_PCI_DMA is enabled or "efi=disable_early_pci_dma"
is passed on the command line, the EFI stub will clear the busmaster bit
on all PCI bridges before ExitBootServices() is called. This will
prevent any malicious PCI devices from being able to perform DMA until
the kernel reenables busmastering after configuring the IOMMU.
This option may cause failures with some poorly behaved hardware and
should not be enabled without testing. The kernel commandline options
"efi=disable_early_pci_dma" or "efi=no_disable_early_pci_dma" may be
used to override the default. Note that PCI devices downstream from PCI
bridges are disconnected from their drivers first, using the UEFI
driver model API, so that DMA can be disabled safely at the bridge
level.
[ardb: disconnect PCI I/O handles first, as suggested by Arvind]
Co-developed-by: Matthew Garrett <mjg59@google.com>
Signed-off-by: Matthew Garrett <mjg59@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Arvind Sankar <nivedita@alum.mit.edu>
Cc: Matthew Garrett <matthewgarrett@google.com>
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20200103113953.9571-18-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Introduce the ability to define macros to perform argument translation
for the calls that need it, and define them for the boot services that
we currently use.
When calling 32-bit firmware methods in mixed mode, all output
parameters that are 32-bit according to the firmware, but 64-bit in the
kernel (ie OUT UINTN * or OUT VOID **) must be initialized in the
kernel, or the upper 32 bits may contain garbage. Define macros that
zero out the upper 32 bits of the output before invoking the firmware
method.
When a 32-bit EFI call takes 64-bit arguments, the mixed-mode call must
push the two 32-bit halves as separate arguments onto the stack. This
can be achieved by splitting the argument into its two halves when
calling the assembler thunk. Define a macro to do this for the
free_pages boot service.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Matthew Garrett <mjg59@google.com>
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20200103113953.9571-17-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Drop leading underscores and use bool not int for true/false
variables set on the command line.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Arvind Sankar <nivedita@alum.mit.edu>
Cc: Borislav Petkov <bp@alien8.de>
Cc: James Morse <james.morse@arm.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20191224151025.32482-25-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The macros efi_call_early and efi_call_runtime are used to call EFI
boot services and runtime services, respectively. However, the naming
is confusing, given that the early vs runtime distinction may suggest
that these are used for calling the same set of services either early
or late (== at runtime), while in reality, the sets of services they
can be used with are completely disjoint, and efi_call_runtime is also
only usable in 'early' code.
So do a global sweep to replace all occurrences with efi_bs_call or
efi_rt_call, respectively, where BS and RT match the idiom used by
the UEFI spec to refer to boot time or runtime services.
While at it, use 'func' as the macro parameter name for the function
pointers, which is less likely to collide and cause weird build errors.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Arvind Sankar <nivedita@alum.mit.edu>
Cc: Borislav Petkov <bp@alien8.de>
Cc: James Morse <james.morse@arm.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20191224151025.32482-24-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
None of the definitions of the efi_table_attr() still refer to
their 'table' argument so let's get rid of it entirely.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Arvind Sankar <nivedita@alum.mit.edu>
Cc: Borislav Petkov <bp@alien8.de>
Cc: James Morse <james.morse@arm.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20191224151025.32482-23-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
After refactoring the mixed mode support code, efi_call_proto()
no longer uses its protocol argument in any of its implementation,
so let's remove it altogether.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Arvind Sankar <nivedita@alum.mit.edu>
Cc: Borislav Petkov <bp@alien8.de>
Cc: James Morse <james.morse@arm.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20191224151025.32482-22-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Mixed mode translates calls from the 64-bit kernel into the 32-bit
firmware by wrapping them in a call to a thunking routine that
pushes a 32-bit word onto the stack for each argument passed to the
function, regardless of the argument type. This works surprisingly
well for most services and protocols, with the exception of ones that
take explicit 64-bit arguments.
efi_free() invokes the FreePages() EFI boot service, which takes
a efi_physical_addr_t as its address argument, and this is one of
those 64-bit types. This means that the 32-bit firmware will
interpret the (addr, size) pair as a single 64-bit quantity, and
since it is guaranteed to have the high word set (as size > 0),
it will always fail due to the fact that EFI memory allocations are
always < 4 GB on 32-bit firmware.
So let's fix this by giving the thunking code a little hand, and
pass two values for the address, and a third one for the size.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Arvind Sankar <nivedita@alum.mit.edu>
Cc: Borislav Petkov <bp@alien8.de>
Cc: James Morse <james.morse@arm.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20191224151025.32482-21-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We have a helper efi_system_table() that gives us the address of the
EFI system table in memory, so there is no longer point in passing
it around from each function to the next.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Arvind Sankar <nivedita@alum.mit.edu>
Cc: Borislav Petkov <bp@alien8.de>
Cc: James Morse <james.morse@arm.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20191224151025.32482-20-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
As a first step towards getting rid of the need to pass around a function
parameter 'sys_table_arg' pointing to the EFI system table, remove the
references to it in the printing code, which is represents the majority
of the use cases.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Arvind Sankar <nivedita@alum.mit.edu>
Cc: Borislav Petkov <bp@alien8.de>
Cc: James Morse <james.morse@arm.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20191224151025.32482-19-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Use a single implementation for efi_char16_printk() across all
architectures.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Arvind Sankar <nivedita@alum.mit.edu>
Cc: Borislav Petkov <bp@alien8.de>
Cc: James Morse <james.morse@arm.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20191224151025.32482-17-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The efi_call macros on ARM have a dependency on a variable 'sys_table_arg'
existing in the scope of the macro instantiation. Since this variable
always points to the same data structure, let's create a global getter
for it and use that instead.
Note that the use of a global variable with external linkage is avoided,
given the problems we had in the past with early processing of the GOT
tables.
While at it, drop the redundant casts in the efi_table_attr and
efi_call_proto macros.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Arvind Sankar <nivedita@alum.mit.edu>
Cc: Borislav Petkov <bp@alien8.de>
Cc: James Morse <james.morse@arm.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20191224151025.32482-16-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The EFI file I/O routines built on top of the file I/O firmware
services are incompatible with mixed mode, so there is no need
to obfuscate them by using protocol wrappers whose only purpose
is to hide the mixed mode handling. So let's switch to plain
indirect calls instead.
This also means we can drop the mixed_mode aliases from the various
types involved.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Arvind Sankar <nivedita@alum.mit.edu>
Cc: Borislav Petkov <bp@alien8.de>
Cc: James Morse <james.morse@arm.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20191224151025.32482-15-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Annotate all the firmware routines (boot services, runtime services and
protocol methods) called in the boot context as __efiapi, and make
it expand to __attribute__((ms_abi)) on 64-bit x86. This allows us
to use the compiler to generate the calls into firmware that use the
MS calling convention instead of the SysV one.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Arvind Sankar <nivedita@alum.mit.edu>
Cc: Borislav Petkov <bp@alien8.de>
Cc: James Morse <james.morse@arm.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20191224151025.32482-13-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
