Commit Graph

25253 Commits

Author SHA1 Message Date
Mauro Carvalho Chehab
02d7324337 media: radio-si476x: fix behavior when seek->range* are defined
The logic at si476x_radio_s_hw_freq_seek() checks if the
frequency range that will be used to handle hardware seek
has the minimal frequency under rangelow. That works fine
if userspace zeros both fields. However, if userspace
fills either seek->rangelow or seek-rangehigh, it won't
read the corresponding range from the device, causing the
values to be unitialized, as warned by smatch:

	drivers/media/radio/radio-si476x.c:789 si476x_radio_s_hw_freq_seek() error: uninitialized symbol 'rangelow'.
	drivers/media/radio/radio-si476x.c:789 si476x_radio_s_hw_freq_seek() error: uninitialized symbol 'rangehigh'.

Fix it by initializing those vars from the values present at
the struct v4l2_hw_freq_seek.

While here, simplify the logic which reads such values from
the hardware limits.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-11 13:04:51 -05:00
Mauro Carvalho Chehab
bc3cad2b92 media: qt1010: fix bogus warnings
The logic at qt1010_init_meas1() and qt1010_init_meas2()
are too complex for static analizers to identify that
some vars are always be initialized.

That causes smatch to produce the following warnings:
	drivers/media/tuners/qt1010.c:248 qt1010_init_meas1() error: uninitialized symbol 'val2'.
	drivers/media/tuners/qt1010.c:282 qt1010_init_meas2() error: uninitialized symbol 'val'.

So, add annotations to prevent those bogus warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-11 13:04:51 -05:00
Mauro Carvalho Chehab
01a26ff99c media: tda8290: initialize agc gain
The tuning logic at tda8290 relies on agc_stat and
adc_sat to be initialized. However, as warned by smatch:

	drivers/media/tuners/tda8290.c:261 tda8290_set_params() error: uninitialized symbol 'agc_stat'.
	drivers/media/tuners/tda8290.c:261 tda8290_set_params() error: uninitialized symbol 'adc_sat'.
	drivers/media/tuners/tda8290.c:262 tda8290_set_params() error: uninitialized symbol 'adc_sat'.

That could cause an erratic behavior if PLL is not locked,
as the code will only work if
	!(pll_stat & 0x80) && (adc_sat < 20)

So, initialize it to zero, in order to let the code below
to be called, with should give more chances to adjust the
tuner gain, in order to get a PLL lock.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-11 13:04:50 -05:00
Mauro Carvalho Chehab
79c5453d3e media: atmel-isc: avoid returning a random value at isc_parse_dt()
As warned by smatch:
drivers/media/platform/atmel/atmel-isc.c:2097 isc_parse_dt() error: uninitialized symbol 'ret'.

The problem here is that of_graph_get_next_endpoint() can
potentially return NULL on its first pass, with would make
it return a random value, as ret is not initialized.

While here, use while(1) instead of for(; ;), as while is
the preferred syntax for such kind of loops.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-11 13:04:50 -05:00
Matthias Schwarzott
910b0797fa media: em28xx: Fix use-after-free when disconnecting
Fix bug by moving the i2c_unregister_device calls after deregistration
of dvb frontend.

The new style i2c drivers already destroys the frontend object at
i2c_unregister_device time.
When the dvb frontend is unregistered afterwards it leads to this oops:

  [ 6058.866459] BUG: unable to handle kernel NULL pointer dereference at 00000000000001f8
  [ 6058.866578] IP: dvb_frontend_stop+0x30/0xd0 [dvb_core]
  [ 6058.866644] PGD 0
  [ 6058.866646] P4D 0

  [ 6058.866726] Oops: 0000 [#1] SMP
  [ 6058.866768] Modules linked in: rc_pinnacle_pctv_hd(O) em28xx_rc(O) si2157(O) si2168(O) em28xx_dvb(O) em28xx(O) si2165(O) a8293(O) tda10071(O) tea5767(O) tuner(O) cx23885(O) tda18271(O) videobuf2_dvb(O) videobuf2_dma_sg(O) m88ds3103(O) tveeprom(O) cx2341x(O) v4l2_common(O) dvb_core(O) rc_core(O) videobuf2_memops(O) videobuf2_v4l2(O) videobuf2_core(O) videodev(O) media(O) bluetooth ecdh_generic ums_realtek uas rtl8192cu rtl_usb rtl8192c_common rtlwifi usb_storage snd_hda_codec_realtek snd_hda_codec_hdmi snd_hda_codec_generic i2c_mux snd_hda_intel snd_hda_codec snd_hwdep x86_pkg_temp_thermal snd_hda_core kvm_intel kvm irqbypass [last unloaded: videobuf2_memops]
  [ 6058.867497] CPU: 2 PID: 7349 Comm: kworker/2:0 Tainted: G        W  O    4.13.9-gentoo #1
  [ 6058.867595] Hardware name: MEDION E2050 2391/H81H3-EM2, BIOS H81EM2W08.308 08/25/2014
  [ 6058.867692] Workqueue: usb_hub_wq hub_event
  [ 6058.867746] task: ffff88011a15e040 task.stack: ffffc90003074000
  [ 6058.867825] RIP: 0010:dvb_frontend_stop+0x30/0xd0 [dvb_core]
  [ 6058.867896] RSP: 0018:ffffc90003077b58 EFLAGS: 00010293
  [ 6058.867964] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000010040001f
  [ 6058.868056] RDX: ffff88011a15e040 RSI: ffffea000464e400 RDI: ffff88001cbe3028
  [ 6058.868150] RBP: ffffc90003077b68 R08: ffff880119390380 R09: 000000010040001f
  [ 6058.868241] R10: ffffc90003077b18 R11: 000000000001e200 R12: ffff88001cbe3028
  [ 6058.868330] R13: ffff88001cbe68d0 R14: ffff8800cf734000 R15: ffff8800cf734098
  [ 6058.868419] FS:  0000000000000000(0000) GS:ffff88011fb00000(0000) knlGS:0000000000000000
  [ 6058.868511] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [ 6058.868578] CR2: 00000000000001f8 CR3: 00000001113c5000 CR4: 00000000001406e0
  [ 6058.868662] Call Trace:
  [ 6058.868705]  dvb_unregister_frontend+0x2a/0x80 [dvb_core]
  [ 6058.868774]  em28xx_dvb_fini+0x132/0x220 [em28xx_dvb]
  [ 6058.868840]  em28xx_close_extension+0x34/0x90 [em28xx]
  [ 6058.868902]  em28xx_usb_disconnect+0x4e/0x70 [em28xx]
  [ 6058.868968]  usb_unbind_interface+0x6d/0x260
  [ 6058.869025]  device_release_driver_internal+0x150/0x210
  [ 6058.869094]  device_release_driver+0xd/0x10
  [ 6058.869150]  bus_remove_device+0xe4/0x160
  [ 6058.869204]  device_del+0x1ce/0x2f0
  [ 6058.869253]  usb_disable_device+0x99/0x270
  [ 6058.869306]  usb_disconnect+0x8d/0x260
  [ 6058.869359]  hub_event+0x93d/0x1520
  [ 6058.869408]  ? dequeue_task_fair+0xae5/0xd20
  [ 6058.869467]  process_one_work+0x1d9/0x3e0
  [ 6058.869522]  worker_thread+0x43/0x3e0
  [ 6058.869576]  kthread+0x104/0x140
  [ 6058.869602]  ? trace_event_raw_event_workqueue_work+0x80/0x80
  [ 6058.869640]  ? kthread_create_on_node+0x40/0x40
  [ 6058.869673]  ret_from_fork+0x22/0x30
  [ 6058.869698] Code: 54 49 89 fc 53 48 8b 9f 18 03 00 00 0f 1f 44 00 00 41 83 bc 24 04 05 00 00 02 74 0c 41 c7 84 24 04 05 00 00 01 00 00 00 0f ae f0 <48> 8b bb f8 01 00 00 48 85 ff 74 5c e8 df 40 f0 e0 48 8b 93 f8
  [ 6058.869850] RIP: dvb_frontend_stop+0x30/0xd0 [dvb_core] RSP: ffffc90003077b58
  [ 6058.869894] CR2: 00000000000001f8
  [ 6058.875880] ---[ end trace 717eecf7193b3fc6 ]---

Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-11 13:04:50 -05:00
Mauro Carvalho Chehab
7b303d2cae media: ddbridge: shut up a new warning
drivers/media/pci/ddbridge/ddbridge-ci.c:321:5: warning: no previous prototype for 'ddb_ci_attach' [-Wmissing-prototypes]
 int ddb_ci_attach(struct ddb_port *port, u32 bitrate)
     ^~~~~~~~~~~~~

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-11 13:04:49 -05:00
Daniel Scheller
40f80610e8 media: ddbridge: update driver version number
Update the driver version number/string to 0.9.32-integrated.

Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-11 13:04:48 -05:00
Daniel Scheller
9cc6544718 media: stv0910: read and update mod_cod in read_status()
Add missing state->modcod update from upstream driver which needs to be
done when manage_matype_info() sets is_vcm on certain S2 transponders.

Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-11 13:04:48 -05:00
Daniel Scheller
1c71450151 media: ddbridge/max: prefix lnb_init_fmode() and fe_attach_mxl5xx()
Add a ddb_ prefix to the two functions to better avoid conflicts in the
global namespace, ie. when building everything into the kernel image.

Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-11 13:04:47 -05:00
Daniel Scheller
2d8c98b820 media: ddbridge/max: rename ddbridge-maxs8.[c|h] to ddbridge-max.[c|h]
Rename the MaxS4/8 support files following upstream. References to these
files and descriptions have been updated aswell.

Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-11 13:04:47 -05:00
Daniel Scheller
04bdf86360 media: ddbridge/ci: change debug printing to debug severity
slot_ts_enable_xo2() logged debug output to info instead of debug, so
fix this up.

Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-11 13:04:46 -05:00
Daniel Scheller
70d3ae1bea media: ddbridge: split off CI (common interface) from ddbridge-core
Move all CI device support related code from ddbridge-core to ddbridge-ci,
following the previously split off MaxS4/8 support.

Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-11 13:04:46 -05:00
Daniel Scheller
757d78d35a media: ddbridge: fixup checkpatch-strict issues
Fixes several alignment, braces, space-before-cast, camelcase et al issues
reported by checkpatch --strict, plus a few more checkpatch didn't report.

Three checks are left after this though:
- one CamelCase in ddbridge-core, related to defines/vars/enums referenced
  from the stv090x demod driver
- one macro argument reuse in ddbridge-core aswell
- one unbalanced braces around else in ddbridge-main, which is due to
  #ifdefs related to CONFIG_PCI_MSI, which preferrably should be kept
  as-is for readability.

Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-11 13:04:45 -05:00
Daniel Scheller
1d8343aa35 media: ddbridge: remove unneeded *fe vars from attach functions
These are only used in C/T demod attach functions, don't add any real
benefit (ie. line length savings) and in case of cxd28xx_attach aren't
even used consequently. Remove them.

Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-11 13:04:45 -05:00
Mauro Carvalho Chehab
2919d12de5 media: mxl5xx: fix tuning logic
The tuning logic is broken with regards to status report:
it relies on a previously-cached value that may not be valid
if re-tuned.

Change the logic to always read the status.

Acked-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-11 13:04:33 -05:00
Maciej S. Szmigiero
4f1bdf0a75 media: cx25840: fix a possible divide by zero in set_fmt callback
If set_fmt callback is called with format->width or format->height set to
zero and HACTIVE_CNT or VACTIVE_CNT bits (respectively) in chip are zero
we will divide by zero later in this callback when we try to calculate
HSC or VSC values.

Fix this by explicitly rejecting these values.

Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-11 13:04:33 -05:00
Maciej S. Szmigiero
7ff0613033 media: cx25840: describe standard for 0b1100 value in AFD_FMT_STAT bits
A 0b1100 value in 4 LSBs of "General Status 1" register (AFD_FMT_STAT) has
known meaning for CX2584x-series chips - it means that a SECAM signal is
currently detected by the chip.

Use this opportunity to also fix wrong binary values that were present
as comments attached to some entries in an array where
chip register -> V4L2 standard mappings are stored.

Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-11 13:04:32 -05:00
Malcolm Priestley
7bf7a7116e media: dvb-usb-v2: lmedm04: move ts2020 attach to dm04_lme2510_tuner
When the tuner was split from m88rs2000 the attach function is in wrong
place.

Move to dm04_lme2510_tuner to trap errors on failure and removing
a call to lme_coldreset.

Prevents driver starting up without any tuner connected.

Fixes to trap for ts2020 fail.
LME2510(C): FE Found M88RS2000
ts2020: probe of 0-0060 failed with error -11
...
LME2510(C): TUN Found RS2000 tuner
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] PREEMPT SMP KASAN

Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-11 07:52:47 -05:00
Malcolm Priestley
3d932ee27e media: dvb-usb-v2: lmedm04: Improve logic checking of warm start
Warm start has no check as whether a genuine device has
connected and proceeds to next execution path.

Check device should read 0x47 at offset of 2 on USB descriptor read
and it is the amount requested of 6 bytes.

Fix for
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access as

Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-11 07:51:39 -05:00
Mauro Carvalho Chehab
1e6f57b2b4 media: siano: add SPDX markups
As we're now using SPDX identifiers, add the proper SPDX,
better identifying the licenses whith apply to the source code.

As we're now using the short license, it doesn't make sense to
keep the original license text.

Also, fix MODULE_LICENSE to properly identify GPL v2
at the Siano's common driver. Some codes there are licensed
on GPL v2 or latter, while others are GPL v2 only. So,
in order to reflect the common license that applies to
everything, the module itself should be GPLv2 only.

While here, use the Kernel's coding style for the comments
with copyright info.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-11 07:44:07 -05:00
Mauro Carvalho Chehab
459ee17c56 media: i2c: add SPDX identifiers to the code I wrote
As we're now using SPDX identifiers, on the several
media drivers I wrote, add the proper SPDX, identifying
the license I meant.

As we're now using the short license, it doesn't make sense to
keep the original license text.

Also, fix MODULE_LICENSE to properly identify GPL v2.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-11 07:43:36 -05:00
Mauro Carvalho Chehab
688c73c64d media: rc keymaps: add SPDX identifiers to the code I wrote
As we're now using SPDX identifiers, on the several
RC keymap files I wrote, add the proper SPDX, identifying
the license I meant.

As we're now using the short license, it doesn't make sense to
keep the original license text.

Also, fix MODULE_LICENSE to identify GPL v2, as this is the
minimal license requirement for those modles.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-11 07:42:54 -05:00
Mauro Carvalho Chehab
75d1e3ef9f media: usb: add SPDX identifiers to some code I wrote
As we're now using SPDX identifiers, on several
media drivers I wrote, add the proper SPDX, identifying
the license I meant.

As we're now using the short license, it doesn't make sense to
keep the original license text.

Also, fix MODULE_LICENSE to properly identify GPL v2.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-11 07:41:11 -05:00
Mauro Carvalho Chehab
0c20e8cac2 media: tuners: add SPDX identifiers to the code I wrote
As we're now using SPDX identifiers, on the several
media drivers I wrote, add the proper SPDX, identifying
the license I meant.

As we're now using the short license, it doesn't make sense to
keep the original license text.

Also, fix MODULE_LICENSE to properly identify GPL v2.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-11 07:39:42 -05:00
Mauro Carvalho Chehab
20835280ce media: rc: add SPDX identifiers to the code I wrote
As we're now using SPDX identifiers, on the several
media drivers I wrote, add the proper SPDX, identifying
the license I meant.

As we're now using the short license, it doesn't make sense to
keep the original license text.

Also, fix MODULE_LICENSE to properly identify GPL v2.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-11 07:38:25 -05:00
Laurent Pinchart
0393e73564 media: uvcvideo: Stream error events carry no data
According to the UVC specification, stream error events carry no data.
Fix a buffer overflow (that should be harmless given data alignment)
when reporting the stream error event by removing the data byte from the
message.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08 11:33:09 -05:00
Baoyou Xie
dfc1648c57 media: uvcvideo: Mark buffer error where overflow
Some cameras post inaccurate frame where next frame data overlap
it. this results in screen flicker, and it need to be prevented.

So this patch marks the buffer error to discard the frame where
buffer overflow.

Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08 11:32:29 -05:00
Jaejoong Kim
5ba3dff4f3 media: uvcvideo: Remove duplicate & operation
usb_endpoint_maxp() has an inline keyword and searches for bits[10:0]
by & operation with 0x7ff. So, we can remove the duplicate & operation
with 0x7ff.

Signed-off-by: Jaejoong Kim <climbbb.kim@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08 11:32:03 -05:00
Nicolas Dufresne
e96cdc9a0a media: uvcvideo: Add D3DFMT_L8 support
Microsoft HoloLense UVC sensor uses D3DFMT instead of FOURCC when
exposing formats. This adds support for D3DFMT_L8 as exposed from
the Acer Windows Mixed Reality Headset.

Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08 11:30:07 -05:00
Vasyl Gomonovych
248cb158bc media: exynos4-is: Use PTR_ERR_OR_ZERO()
Fix ptr_ret.cocci warnings:
drivers/media/platform/exynos4-is/fimc-lite.c:1465:1-3: WARNING: PTR_ERR_OR_ZERO can be used

Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR

Generated by: scripts/coccinelle/api/ptr_ret.cocci

Signed-off-by: Vasyl Gomonovych <gomonovych@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08 11:29:04 -05:00
Stanimir Varbanov
f3105f0ae4 media: venus: cleanup set_property controls
Move ptype (property type) initialization out of switch case
and save few lines of code.

Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08 11:28:37 -05:00
Geert Uytterhoeven
0ff6c131c8 media: i2c: adv748x: Restore full DT paths in kernel messages
As of_node_full_name() now returns only the basename, the endpoint
information printed became useless:

    adv748x 4-0070: Endpoint endpoint on port 7
    adv748x 4-0070: Endpoint endpoint on port 8
    adv748x 4-0070: Endpoint endpoint on port 10
    adv748x 4-0070: Endpoint endpoint on port 11

Restore the old behavior by using "%pOF" instead:

    adv748x 4-0070: Endpoint /soc/i2c@e66d8000/video-receiver@70/port@7/endpoint on port 7
    adv748x 4-0070: Endpoint /soc/i2c@e66d8000/video-receiver@70/port@8/endpoint on port 8
    adv748x 4-0070: Endpoint /soc/i2c@e66d8000/video-receiver@70/port@10/endpoint on port 10
    adv748x 4-0070: Endpoint /soc/i2c@e66d8000/video-receiver@70/port@11/endpoint on port 11

Fixes: a7e4cfb0a7 ("of/fdt: only store the device node basename in full_name")

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08 11:27:46 -05:00
Arnd Bergmann
aad2fa4c8b media: vivid: use ktime_t for timestamp calculation
timespec is generally deprecated because of the y2038 overflow.
In vivid, the usage is fine, since we are dealing with monotonic
timestamps, but we can also simplify the code by going to ktime_t.

Using ktime_divns() should be roughly as efficient as the old code,
since the constant 64-bit division gets turned into a multiplication
on modern platforms, and we save multiple 32-bit divisions that can be
expensive e.g. on ARMv7.

Tested-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08 11:26:24 -05:00
Arnd Bergmann
6c542426b6 media: solo6x10: use ktime_get_ts64() for time sync
solo6x10 correctly deals with time stamps and will never
suffer from overflows, but it uses the deprecated 'struct timespec'
type and 'ktime_get_ts()' interface to read the monotonic clock.

This changes it to use ktime_get_ts64() instead, so we can
eventually remove ktime_get_ts().

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ismael Luceno <ismael@iodev.co.uk>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08 11:21:29 -05:00
Loic Poulain
f7d12fea16 media: venus: venc: Apply inloop deblocking filter
Deblocking filter allows to reduce blocking artifacts and improve
visual quality. This is configurable via the V4L2 API but eventually
not applied to the encoder.

Note that alpha and beta deblocking values are 32-bit signed (-6;+6).

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08 11:20:41 -05:00
Loic Poulain
a7837e1167 media: venus: venc: configure entropy mode
H264 entropy mode can be selected via V4L2 API but is eventually not
applied. Configure encoder with selected mode, CALVC (def) or CABAC.

Note that hw/firmware also expects a CABAC model configuration which
currently doesn't have existing V4L2 API control. For now, use model_0
which seems always supported and so the default one.

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08 11:20:06 -05:00
Gustavo A. R. Silva
5a18c2434f media: davinci: vpif_capture: add NULL check on devm_kzalloc return value
Check return value from call to devm_kzalloc() in order to prevent
a NULL pointer dereference.

This issue was detected with the help of Coccinelle.

Fixes: 4a5f8ae50b ("[media] davinci: vpif_capture: get subdevs from DT when available")

Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08 11:15:41 -05:00
Jesse Chan
20772c1a6f media: tegra-cec: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE
This change resolves a new compile-time warning
when built as a loadable module:

WARNING: modpost: missing MODULE_LICENSE() in drivers/media/platform/tegra-cec/tegra_cec.o
see include/linux/module.h for more information

This adds the license as "GPL v2", which matches the header of the file.

MODULE_DESCRIPTION and MODULE_AUTHOR are also added.

Signed-off-by: Jesse Chan <jc@linux.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08 11:15:17 -05:00
Jesse Chan
5331aec1bf media: soc_camera: soc_scale_crop: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE
This change resolves a new compile-time warning
when built as a loadable module:

WARNING: modpost: missing MODULE_LICENSE() in drivers/media/platform/soc_camera/soc_scale_crop.o
see include/linux/module.h for more information

This adds the license as "GPL", which matches the header of the file.

MODULE_DESCRIPTION and MODULE_AUTHOR are also added.

Signed-off-by: Jesse Chan <jc@linux.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08 11:14:44 -05:00
Jesse Chan
ccbc1e3876 media: mtk-vcodec: add missing MODULE_LICENSE/DESCRIPTION
This change resolves a new compile-time warning
when built as a loadable module:

WARNING: modpost: missing MODULE_LICENSE() in drivers/media/platform/mtk-vcodec/mtk-vcodec-common.o
see include/linux/module.h for more information

This adds the license as "GPL v2", which matches the header of the file.

MODULE_DESCRIPTION is also added.

Signed-off-by: Jesse Chan <jc@linux.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08 11:14:23 -05:00
Greg Kroah-Hartman
b627758489 media: usbvision: remove unneeded DRIVER_LICENSE #define
There is no need to #define the license of the driver, just put it in
the MODULE_LICENSE() line directly as a text string.

This allows tools that check that the module license matches the source
code license to work properly, as there is no need to unwind the
unneeded dereference.

Cc: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Johan Hovold <johan@kernel.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Reported-by: Philippe Ombredanne <pombredanne@nexb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08 11:13:44 -05:00
Arnd Bergmann
41e3308528 media: vivid: print time in y2038-safe way
time_to_tm() takes a time_t value that overflows in 2038 on 32-bit
systems. time64_to_tm() doesn't have this problem, so let's use that in
combination with ktime_get_real_seconds() to read a 64-bit time
value.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08 11:13:16 -05:00
Dan Carpenter
d5ac225c7d media: cpia2: Fix a couple off by one bugs
The cam->buffers[] array has cam->num_frames elements so the > needs to
be changed to >= to avoid going beyond the end of the array.  The
->buffers[] array is allocated in cpia2_allocate_buffers() if you want
to confirm.

Fixes: ab33d5071d ("V4L/DVB (3376): Add cpia2 camera support")

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08 11:12:53 -05:00
Martin Kepplinger
a95d811e50 media: coda: remove definition of CODA_STD_MJPG
According to i.MX VPU API Reference Manuals the MJPG video codec is
referenced to by number 7, not 3.

Also Philipp pointed out that this value is only meant to fill in
CMD_ENC_SEQ_COD_STD for encoding, only on i.MX53. It was never written
to any register, and even if defined correctly, wouldn't be needed
for i.MX6.

So avoid confusion and remove this definition.

Signed-off-by: Martin Kepplinger <martink@posteo.de>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08 11:12:31 -05:00
Hans Verkuil
c8959a39fd media: cec: disable the hardware when unregistered
When the device is being unregistered disable the hardware, don't wait
until cec_delete_adapter is called as the hardware may have disappeared by
then. This would be the case for hotplugable devices.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reported-by: Bård Eirik Winther <bwinther@cisco.com>
Tested-by: Bård Eirik Winther <bwinther@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08 11:11:25 -05:00
Hans Verkuil
48ea2e926b media: cec: add the adap_monitor_pin_enable op
Some devices can monitor the CEC pin using an interrupt, but you
only want to enable the interrupt if you actually switch to pin
monitoring mode.

So add a new op that is called when pin monitoring needs to be
switched on or off.

Also fix a small bug where the initial CEC pin event was sent
again when calling S_MODE twice with the same CEC_MODE_MONITOR_PIN
mode.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08 11:10:00 -05:00
Arnd Bergmann
cc05c0ba23 media: pulse8-cec: print time using time64_t
The firmware timestamp is an unsigned 32-bit value, but we copy it into
a signed 32-bit variable, so we can theoretically get an overflow in
the calculation when the timestamp is between 2038 and 2106.

This changes the temporary variable to time64_t and changes the deprecated
time_to_tm() over to time64_to_tm() accordingly.

There is still an overflow in y2106, but that is a limitation of the
firmware interface, not a kernel problem.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08 11:08:22 -05:00
Hans Verkuil
52cf1d964e media: vimc: add test_pattern and h/vflip controls to the sensor
Add support for the test_pattern control and the h/vflip controls.

This makes it possible to switch to more interesting test patterns and to
test control handling in v4l-subdevs.

There are more tpg-related controls that can be added, but this is a good
start.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
[hans.verkuil@cisco.com: fix small whitespace checkpatch warning]
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08 10:44:55 -05:00
Dean A
e2a067048d media: s2255drv: update firmware load
fixes intermittent soft reboot issue with firmware load
    increases wait time of reset, as required by HW

Signed-off-by: Dean Anderson <dean@sensoray.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08 10:43:59 -05:00
Arvind Yadav
1ee332acc6 media: cx23885: Handle return value of kasprintf
kasprintf() can fail here and we must check its return value.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08 10:40:39 -05:00
Kieran Bingham
a17d2d6cd9 media: vsp1: Prevent suspending and resuming DRM pipelines
When used as part of a display pipeline, the VSP is stopped and
restarted explicitly by the DU from its suspend and resume handlers.
There is thus no need to stop or restart pipelines in the VSP suspend
and resume handlers, and doing so would cause the hardware to be
left in a misconfigured state.

Ensure that the VSP suspend and resume handlers do not affect DRM-based
pipelines.

Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08 10:40:10 -05:00
Hans Verkuil
2c21ac0ae4 media: cec-adap: add '0x' prefix when printing status
It's not clear if the transmit status that is printed when debugging
is enabled is hex or decimal. Add 0x prefix to make this explicit.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08 10:39:38 -05:00
Hans Verkuil
979d33d3a7 media: adv7604.c: add missing return
A 'return' was missing when detecting Arbitration Lost and
calling transmit_done. With the return transmit_done could be
called a second time, confusing the CEC framework. Luckily
the Arbitration Lost condition is very rare.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08 10:39:17 -05:00
Stanimir Varbanov
8fc58186bb media: venus: venc: set correctly GOP size and number of B-frames
This change fixes the calculation of B-frames and GOP size by
adopt v4l2 controls with the firmware interface expectations.

Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
[hans.verkuil@cisco.com: fixed two small checkpatch comments]
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08 10:38:08 -05:00
Romain Reignier
fdda01090c media: cx231xx: Add support for The Imaging Source DFG/USB2pro
Note that the inputs for the Composite and S-Video are inverted in
regard to most of the other boards using a cx231xx chip.

Signed-off-by: Romain Reignier <r.reignier@robopec.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
2017-12-08 10:35:08 -05:00
Andy Shevchenko
5195978fcb media: i2c: adv748x: Remove duplicate NULL check
Since i2c_unregister_device() became NULL-aware we may remove duplicate
NULL check.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08 10:13:06 -05:00
Andy Shevchenko
297aca189f media: adv7180: Remove duplicate checks
Since i2c_unregister_device() became NULL-aware we may remove duplicate checks.

Cc: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08 10:12:45 -05:00
Colin Ian King
85f42985af media: drivers/media/pci/zoran: remove redundant assignment to pointer h
The pointer h is already initialized to codeclist_top so the second
identical assignment is redundant and can be removed. Cleans up clang
warning:

drivers/media/pci/zoran/videocodec.c:322:21: warning: Value stored to 'h'
during its initialization is never read

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08 10:11:53 -05:00
Colin Ian King
60a881862c media: pt3: remove redundant assignment to mask
Variable mask is being set to 0x80 and then set to this value again
in the following for-loop. Remove the extraneous first setting of mask.
Cleans up clang warning:

drivers/media/pci/pt3/pt3_i2c.c:88:2: warning: Value stored to 'mask'
is never read

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08 10:11:22 -05:00
Jérémy Lefaure
e40d14a897 media: use ARRAY_SIZE
Using the ARRAY_SIZE macro improves the readability of the code. Also,
it is not always useful to use a variable to store this constant
calculated at compile time.

Found with Coccinelle with the following semantic patch:
@r depends on (org || report)@
type T;
T[] E;
position p;
@@
(
 (sizeof(E)@p /sizeof(*E))
|
 (sizeof(E)@p /sizeof(E[...]))
|
 (sizeof(E)@p /sizeof(T))
)

Signed-off-by: Jérémy Lefaure <jeremy.lefaure@lse.epita.fr>
Reviewed-by: Michael Ira Krufky <mkrufky@linuxtv.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08 10:11:00 -05:00
Joe Perches
37d5efb019 media: gspca: Convert PDEBUG to gspca_dbg
Use a more typical logging style.

The current macro hides the gspca_dev argument so add it to the
macro uses instead.

Miscellanea:

o Add missing '\n' terminations to formats
o Realign arguments to open parenthesis
o Remove commented out uses of PDEBUG

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08 10:10:15 -05:00
Joe Perches
52173c5f3f media: gspca: Convert PERR to gspca_err
Use a more typical kernel logging style.

The current macro hides the gspca_dev argument so add it to the
macro uses instead.

Miscellanea:

o Add missing '\n' terminations to formats
o Realign arguments to open parenthesis

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08 10:08:50 -05:00
Dan Carpenter
6e298d5847 media: stk-webcam: Fix use after free on disconnect
We free the stk_camera device too early.  It's allocate first in probe
and it should be freed last in stk_camera_disconnect().

Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08 10:06:46 -05:00
Arvind Yadav
c0f71bbb81 media: hdpvr: Fix an error handling path in hdpvr_probe()
Here, hdpvr_register_videodev() is responsible for setup and
register a video device. Also defining and initializing a worker.
hdpvr_register_videodev() is calling by hdpvr_probe at last.
So no need to flush any work here.
Unregister v4l2, free buffers and memory. If hdpvr_probe() will fail.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08 10:06:19 -05:00
Colin Ian King
cee32edb23 media: cxusb: pass buf as a const u8 * pointer and make buf static const
Don't populate the read-only u8 array buf on the stack at run time but
instead make it static const; makes object code smaller saving over 480
bytes:

Before:
   text	   data	    bss	    dec	    hex	filename
  33030	  65936	    192	  99158	  18356	drivers/media/usb/dvb-usb/cxusb.o

After:
   text	   data	    bss	    dec	    hex	filename
  32446	  66032	    192	  98670	  1816e	drivers/media/usb/dvb-usb/cxusb.o

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08 10:05:41 -05:00
Arnd Bergmann
d259f91c0e media: solo6x10: hide unused variable
When building without CONFIG_GPIOLIB, we get a harmless
warning about an unused variable:

drivers/media/pci/solo6x10/solo6x10-gpio.c: In function 'solo_gpio_init':
drivers/media/pci/solo6x10/solo6x10-gpio.c:165:6: error: unused variable 'ret' [-Werror=unused-variable]

This adds another #ifdef around the declaration.

Fixes: d3202d1981 ("media: solo6x10: export hardware GPIO pins 8:31 to gpiolib interface")

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ismael Luceno <ismael@iodev.co.uk>
Acked-by: Anton Sviridenko <anton@corp.bluecherry.net>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08 10:04:57 -05:00
Colin Ian King
06ac35e52b media: tuners: mxl5005s: make arrays static const, reduces object code size
Don't populate the arrays RegAddr on the stack, instead make them static
const.  Makes the object code smaller by over 980 bytes:

Before:
   text	   data	    bss	    dec	    hex	filename
  64923	    304	      0	  65227	   fecb	drivers/media/tuners/mxl5005s.o

After:
   text	   data	    bss	    dec	    hex	filename
  63779	    464	      0	  64243	   faf3	drivers/media/tuners/mxl5005s.o

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08 10:04:22 -05:00
Kieran Bingham
b0fe777884 media: i2c: adv748x: Store the pixel rate ctrl on CSI objects
The current implementation has to search the list of controls for the
pixel rate control, each time it is set.  This can be optimised easily
by storing the ctrl pointer in the CSI/TX object, and referencing that
directly.

While at it, fix up a missing blank line also highlighted in review
comments.

Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08 10:03:00 -05:00
Alexey Khoroshilov
7df66d7783 media: v4l: mt9v032: Disable clock on error paths
mt9v032_power_on() leaves clk enabled in case of errors,
but it is not expected by its callers.
There is a similar problem in mt9v032_registered().

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08 09:24:01 -05:00
Akinobu Mita
b48d908d2b media: ov7670: add V4L2_CID_TEST_PATTERN control
The ov7670 has the test pattern generator features.  This makes use of
it through V4L2_CID_TEST_PATTERN control.

Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08 09:23:12 -05:00
Akinobu Mita
344aa836e8 media: ov7670: use v4l2_async_unregister_subdev()
The sub-device for ov7670 is registered by v4l2_async_register_subdev().
So it should be unregistered by v4l2_async_unregister_subdev() instead of
v4l2_device_unregister_subdev().

Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08 09:22:03 -05:00
Sakari Ailus
781b045bae media: imx274: Fix error handling, add MAINTAINERS entry
Add the missing MAINTAINERS entry for imx274, fix error handling in driver
probe and unregister the correct control handler in driver remove.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-30 04:45:12 -05:00
Niklas Söderlund
487cc85785 media: v4l: async: use the v4l2_dev from the root notifier when matching sub-devices
When matching and registering a sub-device from a sub-notifier use the
v4l2_device from the root parent notifier. Using the v4l2_dev stored in
the sub-notifier itself is incorrect as it might not be set.

This can be demonstrated by unbinding and rebinding the adv748x driver
and observing that it fails to probe due to the check !v4l2_dev in
v4l2_device_register_subdev().

    # echo 4-0070 > /sys/bus/i2c/drivers/adv748x/unbind
    # echo 4-0070 > /sys/bus/i2c/drivers/adv748x/bind
    adv748x 4-0070: chip found @ 0xe0 revision 2143
    adv748x 4-0070: Failed to probe TXA
    adv748x: probe of 4-0070 failed with error -22

Looking at the commit which adds sub-notifiers to V4L2 it looks like
this is the intended behavior of the original commit. With this fix the
adv748x can be re-bound and still function properly.

Fixes: 2cab00bb07 ("media: v4l: async: Allow binding notifiers to sub-devices")

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-30 04:44:07 -05:00
Tomasz Figa
3bf393860f media: v4l2-fwnode: Check subdev count after checking port
Current implementation of __v4l2_async_notifier_parse_fwnode_endpoints()
checks first whether subdev_count >= subdev_max and only then whether
the port being parsed matches the given port index. This triggers an
error in otherwise valid cases of skipping ports that do not match.

Fix this by moving the check below the port index check.

Fixes: 9ca4653121 ("media: v4l: fwnode: Support generic parsing of graph endpoints in a device")

Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-30 04:43:05 -05:00
Arnd Bergmann
2aa4d4985f media: et8ek8: select V4L2_FWNODE
v4l2_async_register_subdev_sensor_common() is only provided when
CONFIG_V4L2_FWNODE is enabled, otherwise we get a link failure:

drivers/media/i2c/et8ek8/et8ek8_driver.o: In function `et8ek8_probe':
et8ek8_driver.c:(.text+0x884): undefined reference to `v4l2_async_register_subdev_sensor_common'

This adds a Kconfig 'select' statement like all the other users of
this interface have.

Fixes: d8932f38c1 ("media: et8ek8: Add support for flash and lens devices")

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-30 04:42:19 -05:00
Sakari Ailus
fce8ba670b media: ov13858: Select V4L2_FWNODE
The ov13858 driver depends on the V4L2 fwnode, thus add that to Kconfig.

Fixes: 5fcf092e0c ("[media] ov13858: add support for OV13858 sensor")

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-30 04:41:58 -05:00
Sean Young
67f0f15ad5 media: rc: partial revert of "media: rc: per-protocol repeat period"
Since commit d57ea877af ("media: rc: per-protocol repeat period"), most
IR protocols have a lower keyup timeout. This causes problems on the
ite-cir, which has default IR timeout of 200ms.

Since the IR decoders read the trailing space, with a IR timeout of 200ms,
the last keydown will have at least a delay of 200ms. This is more than
the protocol timeout of e.g. rc-6 (which is 164ms). As a result the last
IR will be interpreted as a new keydown event, and we get two keypresses.

Revert the protocol timeout to 250ms, except for cec which needs a timeout
of 550ms.

Fixes: d57ea877af ("media: rc: per-protocol repeat period")

Cc: <stable@vger.kernel.org> # 4.14
Reported-by: Matthias Reichl <hias@horus.com>
Signed-off-by: Sean Young <sean@mess.org>
Tested-by: Matthias Reichl <hias@horus.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-30 04:40:23 -05:00
Laurent Caumont
6d33377f2a media: dvb: i2c transfers over usb cannot be done from stack
Cc: stable@vger.kernel.org
Signed-off-by: Laurent Caumont <lcaumont2@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-30 04:39:32 -05:00
Mauro Carvalho Chehab
be9b53c837 media: dvb-frontends: complete kernel-doc markups
For the dvb-frontends that are now part of the documentation,
complete the kernel-doc markups, in order for them to be
properly used at the driver's kAPI documentation.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-30 04:19:05 -05:00
Mauro Carvalho Chehab
b95b0c98f5 media: dvb_frontends: fix kernel-doc macros
Now, the Kernel checks for kernel_doc format issues.
Weird enough, it didn't get any of those troubles. Shssst!

Well, let's fix it, as a preventive way to avoid having
hundreds of new warnings on some next Linux version.

Tested by adding all files under dvb-frontends that have
"/**" on them.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-30 04:19:04 -05:00
Mauro Carvalho Chehab
cba862dc73 media: drivers: remove "/**" from non-kernel-doc comments
Several comments are wrongly tagged as kernel-doc, causing
those warnings:

  drivers/media/rc/st_rc.c:98: warning: No description found for parameter 'irq'
  drivers/media/rc/st_rc.c:98: warning: No description found for parameter 'data'
  drivers/media/pci/solo6x10/solo6x10-enc.c:183: warning: No description found for parameter 'solo_dev'
  drivers/media/pci/solo6x10/solo6x10-enc.c:183: warning: No description found for parameter 'ch'
  drivers/media/pci/solo6x10/solo6x10-enc.c:183: warning: No description found for parameter 'qp'
  drivers/media/usb/pwc/pwc-dec23.c:652: warning: Cannot understand  *
   on line 652 - I thought it was a doc line
  drivers/media/usb/dvb-usb/cinergyT2-fe.c:40: warning: No description found for parameter 'op'
  drivers/media/usb/dvb-usb/friio-fe.c:301: warning: Cannot understand  * (reg, val) commad list to initialize this module.
   on line 301 - I thought it was a doc line
  drivers/media/rc/streamzap.c:201: warning: No description found for parameter 'urb'
  drivers/media/rc/streamzap.c:333: warning: No description found for parameter 'intf'
  drivers/media/rc/streamzap.c:333: warning: No description found for parameter 'id'
  drivers/media/rc/streamzap.c:464: warning: No description found for parameter 'interface'
  drivers/media/i2c/ov5647.c:432: warning: Cannot understand  * @short Subdev core operations registration
   on line 432 - I thought it was a doc line
  drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'd'
  drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'addr'
  drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'wbuf'
  drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'wlen'
  drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'rbuf'
  drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'rlen'
  drivers/media/platform/vim2m.c:350: warning: No description found for parameter 'priv'
  drivers/media/dvb-frontends/tua6100.c:34: warning: cannot understand function prototype: 'struct tua6100_priv '
  drivers/media/platform/sti/hva/hva-h264.c:140: warning: cannot understand function prototype: 'struct hva_h264_stereo_video_sei '
  drivers/media/platform/sti/hva/hva-h264.c:150: warning: Cannot understand  * @frame_width: width in pixels of the buffer containing the input frame
   on line 150 - I thought it was a doc line
  drivers/media/platform/sti/hva/hva-h264.c:356: warning: Cannot understand  * @ slice_size: slice size
   on line 356 - I thought it was a doc line
  drivers/media/platform/sti/hva/hva-h264.c:369: warning: Cannot understand  * @ bitstream_size: bitstream size
   on line 369 - I thought it was a doc line
  drivers/media/platform/sti/hva/hva-h264.c:395: warning: Cannot understand  * @seq_info:  sequence information buffer
   on line 395 - I thought it was a doc line
  drivers/media/dvb-frontends/sp887x.c:137: warning: No description found for parameter 'fe'
  drivers/media/dvb-frontends/sp887x.c:137: warning: No description found for parameter 'fw'
  drivers/media/dvb-frontends/sp887x.c:287: warning: No description found for parameter 'n'
  drivers/media/dvb-frontends/sp887x.c:287: warning: No description found for parameter 'd'
  drivers/media/dvb-frontends/sp887x.c:287: warning: No description found for parameter 'quotient_i'
  drivers/media/dvb-frontends/sp887x.c:287: warning: No description found for parameter 'quotient_f'
  drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c:83: warning: cannot understand function prototype: 'struct ttusb '
  drivers/media/platform/sh_veu.c:277: warning: No description found for parameter 'priv'
  drivers/media/dvb-frontends/zl10036.c:33: warning: cannot understand function prototype: 'int zl10036_debug; '
  drivers/media/dvb-frontends/zl10036.c:179: warning: No description found for parameter 'state'
  drivers/media/dvb-frontends/zl10036.c:179: warning: No description found for parameter 'frequency'
  drivers/media/platform/rcar_fdp1.c:1139: warning: No description found for parameter 'priv'
  drivers/media/platform/ti-vpe/vpe.c:933: warning: No description found for parameter 'priv'
  drivers/media/usb/gspca/ov519.c:36: warning: No description found for parameter 'fmt'
  drivers/media/usb/dvb-usb/dib0700_devices.c:3367: warning: No description found for parameter 'adap'

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-30 04:19:03 -05:00
Mauro Carvalho Chehab
ed050c2180 media: lm3560: add a missing kernel-doc parameter
Fix this warning:
	drivers/media/i2c/lm3560.c:69: warning: No description found for parameter 'dev'

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-30 04:19:03 -05:00
Mauro Carvalho Chehab
538cf6437a media: rcar_jpu: fix two kernel-doc markups
On kernel-doc, struct declarations should be declared as "struct foo".

Fix the following warnings:
	drivers/media/platform/rcar_jpu.c:265: warning: cannot understand function prototype: 'struct jpu_q_data '
	drivers/media/platform/rcar_jpu.c:281: warning: cannot understand function prototype: 'struct jpu_ctx '

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-30 04:19:03 -05:00
Mauro Carvalho Chehab
2afe216d3d media: vsp1: add a missing kernel-doc parameter
Fix this warning:
	drivers/media/platform/vsp1/vsp1_dl.c:87: warning: No description found for parameter 'has_chain'

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-30 04:19:02 -05:00
Mauro Carvalho Chehab
bd98f7a16d media: soc_camera: fix a kernel-doc markup
Remove this warning:
	drivers/media/platform/soc_camera/soc_scale_crop.c:309: warning: Cannot understand  * @icd		- soc-camera device
	 on line 309 - I thought it was a doc line

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
2017-11-30 04:19:02 -05:00
Mauro Carvalho Chehab
69a52ad319 media: mt2063: fix some kernel-doc warnings
Fix those warnings:
	drivers/media/tuners/mt2063.c:1413: warning: No description found for parameter 'f_ref'
	drivers/media/tuners/mt2063.c:1413: warning: Excess function parameter 'f_Ref' description in 'MT2063_fLO_FractionalTerm'
	drivers/media/tuners/mt2063.c:1476: warning: Excess function parameter 'f_Avoid' description in 'MT2063_CalcLO2Mult'

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-30 04:19:01 -05:00
Mauro Carvalho Chehab
5bef1c0bd5 media: radio-wl1273: fix a parameter name at kernel-doc macro
Solve those warnings:
	drivers/media/radio/radio-wl1273.c:1337: warning: No description found for parameter 'radio'
	drivers/media/radio/radio-wl1273.c:1337: warning: Excess function parameter 'core' description in 'wl1273_fm_set_tx_power'

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-30 04:19:01 -05:00
Mauro Carvalho Chehab
fa7871255f media: s3c-camif: add missing description at s3c_camif_find_format()
Fix this warning:
	drivers/media/platform/s3c-camif/camif-core.c:112: warning: No description found for parameter 'vp'

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-30 04:19:00 -05:00
Mauro Carvalho Chehab
9815635959 media: mtk-vpu: add description for wdt fields at struct mtk_vpu
Fix those warnings:
  drivers/media/platform/mtk-vpu/mtk_vpu.c:223: warning: No description found for parameter 'wdt'
  drivers/media/platform/mtk-vpu/mtk_vpu.c:223: warning: No description found for parameter 'wdt_refcnt'

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-30 04:19:00 -05:00
Mauro Carvalho Chehab
d714a755d5 media: vdec: fix some kernel-doc warnings
Fix those warnings:
  drivers/media/platform/mtk-vcodec/vdec/vdec_h264_if.c:69: warning: No description found for parameter 'reserved'
  drivers/media/platform/mtk-vcodec/vdec/vdec_vp8_if.c:175: warning: Excess struct member 'dev' description in 'vdec_vp8_inst'

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-30 04:18:59 -05:00
Mauro Carvalho Chehab
c5bb831854 media: tvp514x: fix kernel-doc parameters
There are some struct fields that aren't documented, and some
consts whose comments start with /**, but they aren't kernel-doc
annotations. So, fix it:

  drivers/media/i2c/tvp514x.c:127: warning: No description found for parameter 'hdl'
  drivers/media/i2c/tvp514x.c:127: warning: No description found for parameter 'pad'
  drivers/media/i2c/tvp514x.c:127: warning: No description found for parameter 'format'
  drivers/media/i2c/tvp514x.c:127: warning: No description found for parameter 'int_seq'
  drivers/media/i2c/tvp514x.c:219: warning: cannot understand function prototype: 'const struct v4l2_fmtdesc tvp514x_fmt_list[] = '
  drivers/media/i2c/tvp514x.c:235: warning: cannot understand function prototype: 'const struct tvp514x_std_info tvp514x_std_list[] = '
  drivers/media/i2c/tvp514x.c:941: warning: No description found for parameter 'fmt'
  drivers/media/i2c/tvp514x.c:941: warning: Excess function parameter 'format' description in 'tvp514x_set_pad_format'
  drivers/media/i2c/tvp514x.c:1208: warning: cannot understand function prototype: 'const struct i2c_device_id tvp514x_id[] = '

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-30 04:18:59 -05:00
Mauro Carvalho Chehab
b5a21f8a85 media: netup_unidvb: fix a bad kernel-doc markup
There is a bad kernel-doc markup, producing the following warnings:

  drivers/media/pci/netup_unidvb/netup_unidvb_core.c:85: warning: bad line: 			Bits [0-7]:	DMA packet size, 188 bytes
  drivers/media/pci/netup_unidvb/netup_unidvb_core.c:86: warning: bad line: 			Bits [16-23]:	packets count in block, 128 packets
  drivers/media/pci/netup_unidvb/netup_unidvb_core.c:87: warning: bad line: 			Bits [24-31]:	blocks count, 8 blocks
  drivers/media/pci/netup_unidvb/netup_unidvb_core.c:89: warning: bad line: 			For example, value of 375000000 equals to 3 sec

Fix that, and use a list for the bits option, in order for it
to be better format, if we add it to a driver's documentation
file.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-30 04:18:58 -05:00
Mauro Carvalho Chehab
070250a171 media: s5k6aa: describe some function parameters
as warned:
  drivers/media/i2c/s5k6aa.c:429: warning: No description found for parameter 's5k6aa'
  drivers/media/i2c/s5k6aa.c:679: warning: No description found for parameter 's5k6aa'
  drivers/media/i2c/s5k6aa.c:733: warning: No description found for parameter 's5k6aa'
  drivers/media/i2c/s5k6aa.c:733: warning: No description found for parameter 'preset'
  drivers/media/i2c/s5k6aa.c:787: warning: No description found for parameter 'sd'

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-30 04:18:58 -05:00
Mauro Carvalho Chehab
7cd183696e media: s5k6a3: document some fields at struct s5k6a3
drivers/media/i2c/s5k6a3.c:68: warning: No description found for parameter 'clock'
drivers/media/i2c/s5k6a3.c:68: warning: No description found for parameter 'clock_frequency'
drivers/media/i2c/s5k6a3.c:68: warning: No description found for parameter 'power_count'

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-30 04:18:57 -05:00
Mauro Carvalho Chehab
d156f2935b media: radio-si476x: fix kernel-doc markups
get rid of the following warnings:
  drivers/media/radio/radio-si476x.c:317: warning: No description found for parameter 'v4l2dev'
  drivers/media/radio/radio-si476x.c:317: warning: No description found for parameter 'ctrl_handler'
  drivers/media/radio/radio-si476x.c:317: warning: No description found for parameter 'debugfs'
  drivers/media/radio/radio-si476x.c:317: warning: No description found for parameter 'audmode'
  drivers/media/radio/radio-si476x.c:317: warning: Excess struct member 'kref' description in 'si476x_radio'
  drivers/media/radio/radio-si476x.c:317: warning: Excess struct member 'core_lock' description in 'si476x_radio'

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-30 04:18:57 -05:00
Mauro Carvalho Chehab
4521af7811 media: ix2505v: get rid of /** comments
As warned:

  drivers/media/dvb-frontends/ix2505v.c:24: warning: cannot understand function prototype: 'int ix2505v_debug; '
  drivers/media/dvb-frontends/ix2505v.c:59: warning: No description found for parameter 'state'
  drivers/media/dvb-frontends/ix2505v.c:128: warning: No description found for parameter 'fe'

None of the comments there are kernel-doc. So, remove them with:

	perl -pi -e 's,\/\*\*,/*,g' drivers/media/dvb-frontends/ix2505v.c

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-30 04:18:57 -05:00
Mauro Carvalho Chehab
ef69f8d2ff media: tw68: fix kernel-doc markups
There are a few mistakes on the existing markups:

  drivers/media/pci/tw68/tw68-risc.c:32: warning: Cannot understand  *  @rp		pointer to current risc program position
   on line 32 - I thought it was a doc line
  drivers/media/pci/tw68/tw68-risc.c:144: warning: No description found for parameter 'pci'
  drivers/media/pci/tw68/tw68-risc.c:144: warning: No description found for parameter 'buf'
  drivers/media/pci/tw68/tw68-risc.c:144: warning: No description found for parameter 'sglist'
  drivers/media/pci/tw68/tw68-risc.c:144: warning: No description found for parameter 'top_offset'
  drivers/media/pci/tw68/tw68-risc.c:144: warning: No description found for parameter 'bottom_offset'
  drivers/media/pci/tw68/tw68-risc.c:144: warning: No description found for parameter 'bpl'
  drivers/media/pci/tw68/tw68-risc.c:144: warning: No description found for parameter 'padding'
  drivers/media/pci/tw68/tw68-risc.c:144: warning: No description found for parameter 'lines'

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-30 04:18:56 -05:00
Mauro Carvalho Chehab
8fd8747925 media: pxa_camera: get rid of kernel_doc warnings
Get rid of the following warnings:
    drivers/media/platform/pxa_camera.c:247: warning: No description found for parameter 'layout'
    drivers/media/platform/pxa_camera.c:867: warning: No description found for parameter 'buf'
    drivers/media/platform/pxa_camera.c:867: warning: No description found for parameter 'sg'
    drivers/media/platform/pxa_camera.c:867: warning: No description found for parameter 'sglen'
    drivers/media/platform/pxa_camera.c:867: warning: Excess function parameter 'vb' description in 'pxa_init_dma_channel'
    drivers/media/platform/pxa_camera.c:867: warning: Excess function parameter 'dma' description in 'pxa_init_dma_channel'
    drivers/media/platform/pxa_camera.c:867: warning: Excess function parameter 'cibr' description in 'pxa_init_dma_channel'
    drivers/media/platform/pxa_camera.c:1029: warning: No description found for parameter 'last_submitted'
    drivers/media/platform/pxa_camera.c:1029: warning: No description found for parameter 'last_issued'

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-30 04:18:56 -05:00
Mauro Carvalho Chehab
9ec2b40259 media: sta2x11: document missing function parameters
As warned:

    drivers/media/pci/sta2x11/sta2x11_vip.c:414: warning: No description found for parameter 'priv'
    drivers/media/pci/sta2x11/sta2x11_vip.c:442: warning: No description found for parameter 'priv'
    drivers/media/pci/sta2x11/sta2x11_vip.c:476: warning: No description found for parameter 'priv'
    drivers/media/pci/sta2x11/sta2x11_vip.c:493: warning: No description found for parameter 'priv'
    drivers/media/pci/sta2x11/sta2x11_vip.c:524: warning: No description found for parameter 'priv'
    drivers/media/pci/sta2x11/sta2x11_vip.c:548: warning: No description found for parameter 'priv'
    drivers/media/pci/sta2x11/sta2x11_vip.c:566: warning: No description found for parameter 'file'
    drivers/media/pci/sta2x11/sta2x11_vip.c:566: warning: No description found for parameter 'priv'
    drivers/media/pci/sta2x11/sta2x11_vip.c:594: warning: No description found for parameter 'priv'
    drivers/media/pci/sta2x11/sta2x11_vip.c:651: warning: No description found for parameter 'priv'
    drivers/media/pci/sta2x11/sta2x11_vip.c:717: warning: No description found for parameter 'priv'

Most of the above are for the unused priv argument.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-30 04:18:55 -05:00
Mauro Carvalho Chehab
897aa67a47 media: m5mols: fix some kernel-doc markups
Fix those warnings:
	drivers/media/i2c/m5mols/m5mols_capture.c:42: warning: No description found for parameter 'sd'
	drivers/media/i2c/m5mols/m5mols_capture.c:42: warning: No description found for parameter 'addr_num'
	drivers/media/i2c/m5mols/m5mols_capture.c:42: warning: No description found for parameter 'addr_den'
	drivers/media/i2c/m5mols/m5mols_capture.c:42: warning: No description found for parameter 'val'
	drivers/media/i2c/m5mols/m5mols_capture.c:60: warning: No description found for parameter 'info'
	drivers/media/i2c/m5mols/m5mols_controls.c:134: warning: No description found for parameter 'info'
	drivers/media/i2c/m5mols/m5mols_core.c:124: warning: No description found for parameter 'data'
	drivers/media/i2c/m5mols/m5mols_core.c:124: warning: No description found for parameter 'length'
	drivers/media/i2c/m5mols/m5mols_core.c:124: warning: Excess function parameter 'size' description in 'm5mols_swap_byte'
	drivers/media/i2c/m5mols/m5mols_core.c:142: warning: No description found for parameter 'sd'
	drivers/media/i2c/m5mols/m5mols_core.c:241: warning: No description found for parameter 'sd'
	drivers/media/i2c/m5mols/m5mols_core.c:299: warning: No description found for parameter 'sd'
	drivers/media/i2c/m5mols/m5mols_core.c:324: warning: No description found for parameter 'sd'
	drivers/media/i2c/m5mols/m5mols_core.c:324: warning: No description found for parameter 'reg'
	drivers/media/i2c/m5mols/m5mols_core.c:357: warning: No description found for parameter 'sd'
	drivers/media/i2c/m5mols/m5mols_core.c:357: warning: No description found for parameter 'mode'
	drivers/media/i2c/m5mols/m5mols_core.c:374: warning: No description found for parameter 'info'
	drivers/media/i2c/m5mols/m5mols_core.c:429: warning: No description found for parameter 'sd'
	drivers/media/i2c/m5mols/m5mols_core.c:503: warning: No description found for parameter 'sd'
	drivers/media/i2c/m5mols/m5mols_core.c:671: warning: No description found for parameter 'info'
	drivers/media/i2c/m5mols/m5mols_core.c:694: warning: No description found for parameter 'info'
	drivers/media/i2c/m5mols/m5mols_core.c:798: warning: No description found for parameter 'sd'
	drivers/media/i2c/m5mols/m5mols_core.c:853: warning: No description found for parameter 'sd'
	drivers/media/i2c/m5mols/m5mols_core.c:853: warning: No description found for parameter 'on'

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-30 04:18:55 -05:00