Implement the show_options superblock op for omfs as part of a bid to get
rid of s_options and generic_show_options() to make it easier to implement
a context-based mount where the mount options can be passed individually
over a file descriptor.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Implement the show_options superblock op for afs as part of a bid to get
rid of s_options and generic_show_options() to make it easier to implement
a context-based mount where the mount options can be passed individually
over a file descriptor.
Also implement the show_devname op to display the correct device name and thus
avoid the need to display the cell= and volume= options.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Implement the show_options superblock op for affs as part of a bid to get
rid of s_options and generic_show_options() to make it easier to implement
a context-based mount where the mount options can be passed individually
over a file descriptor.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Implement the show_options superblock op for befs as part of a bid to get
rid of s_options and generic_show_options() to make it easier to implement
a context-based mount where the mount options can be passed individually
over a file descriptor.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Luis de Bethencourt <luisbg@osg.samsung.com>
cc: Salah Triki <salah.triki@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Implement the show_options superblock op for spufs as part of a bid to get
rid of s_options and generic_show_options() to make it easier to implement
a context-based mount where the mount options can be passed individually
over a file descriptor.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeremy Kerr <jk@ozlabs.org>
cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The req->fence.error will be set if this request caused GPU hang so
we can use this value to workload->status to indicate whether this
GVT request caused any problem. If it caused GPU hang, we shouldn't
trigger any context switch back to the guest.
v2:
- only take -EIO from fence->error. (Zhenyu)
Fixes: 8f1117abb4 (drm/i915/gvt: handle workload lifecycle properly)
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
For the vGPU workloads, now GVT-g use per vGPU scheduler, the per-ring
work_thread only pick workload belongs to the current vGPU. And with time
slice based scheduler, it waits all the engines become idle before do vGPU
switch. So we can run free dispatch in per-ring work_thread, different ring
running in different 'vGPU' won't happen.
For the workloads between vGPU and Host, this scheduler_mutex can't block
host to dispatch workload into other ring engines.
Here remove this mutex since it impacts the performance when applications
use more than 1 ring engines in 1 vgpu.
ring0 running in vGPU1, ring1 running in Host. Will happen.
ring0 running in vGPU1, ring1 running in vGPU2. Won't happen.
Signed-off-by: Weinan Li <weinan.z.li@intel.com>
Signed-off-by: Ping Gao <ping.a.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
The command buffer address in context like ring buffer base address
and wa_ctx address need to be audit to make sure they are in the
valid GGTT range.
Signed-off-by: Ping Gao <ping.a.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
It will causes memory leak, if the function setup_spt_oos() fail,
in the function intel_gvt_init_gtt(),
which allocated by get_zeroed_page() and mapped by dma_map_page().
Unmap and free the page, after STP oos initialize fail,
it will fix this issue.
Signed-off-by: Zhou, Wenjia <zhiyuan_zhu@htc.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Older kernels could crash or hang if the user write/read some ALUA files
with pscsi and tcmu backends. This patch exports if LIO supports
executing PGR and ALUA scsi commands/checks for the se_device, so userspace
can easily test.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
The workaround for the CELL timebase bug does not correctly mark cr0 as
being clobbered. This means GCC doesn't know that the asm block changes cr0 and
might leave the result of an unrelated comparison in cr0 across the block, which
we then trash, leading to basically random behaviour.
Fixes: 859deea949 ("[POWERPC] Cell timebase bug workaround")
Cc: stable@vger.kernel.org # v2.6.19+
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
[mpe: Tweak change log and flag for stable]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
There are two cases outside the normal address space management
where a CPU's local TLB is to be flushed:
1. Host boot; in case something has left stale entries in the
TLB (e.g., kexec).
2. Machine check; to clean corrupted TLB entries.
CPU state restore from deep idle states also flushes the TLB.
However this seems to be a side effect of reusing the boot code to set
CPU state, rather than a requirement itself.
The current flushing has a number of problems with ISA v3.0B:
- The current radix mode of the MMU is not taken into account. tlbiel
is undefined if the R field does not match the current radix mode.
- ISA v3.0B hash must flush the partition and process table caches.
- ISA v3.0B radix must flush partition and process scoped translations,
partition and process table caches, and also the page walk cache.
Add POWER9 cases to handle these, with radix vs hash determined by the
host MMU mode.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Merge more updates from Andrew Morton:
- most of the rest of MM
- KASAN updates
- lib/ updates
- checkpatch updates
- some binfmt_elf changes
- various misc bits
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (115 commits)
kernel/exit.c: avoid undefined behaviour when calling wait4()
kernel/signal.c: avoid undefined behaviour in kill_something_info
binfmt_elf: safely increment argv pointers
s390: reduce ELF_ET_DYN_BASE
powerpc: move ELF_ET_DYN_BASE to 4GB / 4MB
arm64: move ELF_ET_DYN_BASE to 4GB / 4MB
arm: move ELF_ET_DYN_BASE to 4MB
binfmt_elf: use ELF_ET_DYN_BASE only for PIE
fs, epoll: short circuit fetching events if thread has been killed
checkpatch: improve multi-line alignment test
checkpatch: improve macro reuse test
checkpatch: change format of --color argument to --color[=WHEN]
checkpatch: silence perl 5.26.0 unescaped left brace warnings
checkpatch: improve tests for multiple line function definitions
checkpatch: remove false warning for commit reference
checkpatch: fix stepping through statements with $stat and ctx_statement_block
checkpatch: [HLP]LIST_HEAD is also declaration
checkpatch: warn when a MAINTAINERS entry isn't [A-Z]:\t
checkpatch: improve the unnecessary OOM message test
lib/bsearch.c: micro-optimize pivot position calculation
...
The ELF_ET_DYN_BASE position was originally intended to keep loaders
away from ET_EXEC binaries. (For example, running "/lib/ld-linux.so.2
/bin/cat" might cause the subsequent load of /bin/cat into where the
loader had been loaded.)
With the advent of PIE (ET_DYN binaries with an INTERP Program Header),
ELF_ET_DYN_BASE continued to be used since the kernel was only looking
at ET_DYN. However, since ELF_ET_DYN_BASE is traditionally set at the
top 1/3rd of the TASK_SIZE, a substantial portion of the address space
is unused.
For 32-bit tasks when RLIMIT_STACK is set to RLIM_INFINITY, programs are
loaded above the mmap region. This means they can be made to collide
(CVE-2017-1000370) or nearly collide (CVE-2017-1000371) with
pathological stack regions.
Lowering ELF_ET_DYN_BASE solves both by moving programs below the mmap
region in all cases, and will now additionally avoid programs falling
back to the mmap region by enforcing MAP_FIXED for program loads (i.e.
if it would have collided with the stack, now it will fail to load
instead of falling back to the mmap region).
To allow for a lower ELF_ET_DYN_BASE, loaders (ET_DYN without INTERP)
are loaded into the mmap region, leaving space available for either an
ET_EXEC binary with a fixed location or PIE being loaded into mmap by
the loader. Only PIE programs are loaded offset from ELF_ET_DYN_BASE,
which means architectures can now safely lower their values without risk
of loaders colliding with their subsequently loaded programs.
For 64-bit, ELF_ET_DYN_BASE is best set to 4GB to allow runtimes to use
the entire 32-bit address space for 32-bit pointers.
Thanks to PaX Team, Daniel Micay, and Rik van Riel for inspiration and
suggestions on how to implement this solution.
Fixes: d1fd836dcf ("mm: split ET_DYN ASLR from mmap ASLR")
Link: http://lkml.kernel.org/r/20170621173201.GA114489@beast
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Daniel Micay <danielmicay@gmail.com>
Cc: Qualys Security Advisory <qsa@qualys.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Dmitry Safonov <dsafonov@virtuozzo.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Grzegorz Andrejczuk <grzegorz.andrejczuk@intel.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pratyush Anand <panand@redhat.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We've encountered zombies that are waiting for a thread to exit that are
looping in ep_poll() almost endlessly although there is a pending
SIGKILL as a result of a group exit.
This happens because we always find ep_events_available() and fetch more
events and never are able to check for signal_pending() that would break
from the loop and return -EINTR.
Special case fatal signals and break immediately to guarantee that we
loop to fetch more events and delay making a timely exit.
It would also be possible to simply move the check for signal_pending()
higher than checking for ep_events_available(), but there have been no
reports of delayed signal handling other than SIGKILL preventing zombies
from exiting that would be fixed by this.
It fixes an issue for us where we have witnessed zombies sticking around
for at least O(minutes), but considering the code has been like this
forever and nobody else has complained that I have found, I would simply
queue it up for 4.12.
Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1705031722350.76784@chino.kir.corp.google.com
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jan Kara <jack@suse.cz>
Cc: Davide Libenzi <davidel@xmailserver.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The boolean --color argument did not offer the ability to force
colourized output even if stdout is not a terminal. Change the format
of the argument to the familiar --color[=WHEN] construct as seen in
common Linux utilities such as git, ls and dmesg, which allows the user
to specify whether to colourize output "always", "never", or "auto" when
the output is a terminal. The default is "auto".
The old command-line uses of --color and --no-color are unchanged.
Link: http://lkml.kernel.org/r/efe43bdbad400f39ba691ae663044462493b0773.1496799721.git.joe@perches.com
Signed-off-by: John Brooks <john@fastquake.com>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As of perl 5, version 26, subversion 0 (v5.26.0) some new warnings have
occurred when running checkpatch.
Unescaped left brace in regex is deprecated here (and will be fatal in
Perl 5.30), passed through in regex; marked by <-- HERE in m/^(.\s*){
<-- HERE \s*/ at scripts/checkpatch.pl line 3544.
Unescaped left brace in regex is deprecated here (and will be fatal in
Perl 5.30), passed through in regex; marked by <-- HERE in m/^(.\s*){
<-- HERE \s*/ at scripts/checkpatch.pl line 3885.
Unescaped left brace in regex is deprecated here (and will be fatal in
Perl 5.30), passed through in regex; marked by <-- HERE in
m/^(\+.*(?:do|\))){ <-- HERE / at scripts/checkpatch.pl line 4374.
It seems perfectly reasonable to do as the warning suggests and simply
escape the left brace in these three locations.
Link: http://lkml.kernel.org/r/20170607060135.17384-1-cyrilbur@gmail.com
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Acked-by: Joe Perches <joe@perches.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a block that identifies multiple line function definitions.
Save the function name into $context_function to improve the embedded
function name test.
Look for misplaced open brace on the function definition.
Emit an OPEN_BRACE error when the function definition is similar to
void foo(int arg1,
int arg2) {
Miscellanea:
o Remove the $realfile test in function declaration w/o named arguments test
o Comment the function declaration w/o named arguments test
Link: http://lkml.kernel.org/r/de620ed6ebab75fdfa323741ada2134a0f545892.1496835238.git.joe@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Tested-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
gcc does generates stupid code sign extending data back and forth. Help
by using "unsigned int".
add/remove: 0/0 grow/shrink: 0/3 up/down: 0/-61 (-61)
function old new delta
_parse_integer 128 123 -5
It _still_ does generate useless MOVSX but I don't know how to delete it:
0000000000000070 <_parse_integer>:
...
a0: 89 c2 mov edx,eax
a2: 83 e8 30 sub eax,0x30
a5: 83 f8 09 cmp eax,0x9
a8: 76 11 jbe bb <_parse_integer+0x4b>
aa: 83 ca 20 or edx,0x20
ad: 0f be c2 ===> movsx eax,dl <===
useless
b0: 8d 50 9f lea edx,[rax-0x61]
b3: 83 fa 05 cmp edx,0x5
Patch also helps on embedded archs which generally only like "int". On
arm "and 0xff" is generated which is waste because all values used in
comparisons are positive.
Link: http://lkml.kernel.org/r/20170514194720.GB32563@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
