Commit Graph

3497 Commits

Author SHA1 Message Date
Jens Axboe
51cf22495a aha1542: convert to use the data buffer accessors
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16 11:20:59 +02:00
Jens Axboe
d274a9878b ide-scsi: sg chaining support
Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16 11:20:52 +02:00
Jens Axboe
2f08fe5221 qlogicpti: sg chaining support
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16 11:14:19 +02:00
Jens Axboe
8145bfe463 aic94xx: sg chaining support
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16 11:14:18 +02:00
Jens Axboe
a044189137 qla1280: sg chaining support
Interesting hardware setup...

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16 11:14:18 +02:00
Jens Axboe
b0f655d0ef scsi generic: sg chaining support
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16 11:14:18 +02:00
Jens Axboe
852e034de7 scsi_debug: support sg chaining
Signed-off-by: Douglas Gilbert <dougg@torque.net>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16 11:14:18 +02:00
Jens Axboe
a8474ce23a SCSI: support for allocating large scatterlists
This is what enables large commands. If we need to allocate an
sgtable that doesn't fit in a single page, allocate several
SCSI_MAX_SG_SEGMENTS sized tables and chain them together.

SCSI defaults to large chained sg tables, if the arch supports it.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16 11:12:53 +02:00
Jens Axboe
0cde8d9510 scsi: simplify scsi_free_sgtable()
Just pass in the command, no point in passing in the scatterlist
and scatterlist pool index seperately.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16 11:12:37 +02:00
Jens Axboe
c6132da170 scsi: convert to using sg helpers
This converts the SCSI mid layer to using the sg helpers for looking up
sg elements, instead of doing it manually.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16 11:08:49 +02:00
Jens Axboe
fd5d806266 block: convert blkdev_issue_flush() to use empty barriers
Then we can get rid of ->issue_flush_fn() and all the driver private
implementations of that.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16 11:05:02 +02:00
Linus Torvalds
c596cc46ba scsi/gdth: fix crash in gdth_timeout if no gdth controllers found
If the gdth module is loaded (or compiled in), the gdth_timeout function
gets started even if no actual gdth controllers are found b the probing.

That ends up not only being unnecessary, but also causes a crash due to
the function blindly just trying to pick the first entry off the
"gdth_instances" list, and accessing it - which obviously doesn't work
if the list is empty!

Noticed by Ingo Molnar.

Tested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-15 12:46:16 -07:00
Linus Torvalds
df3d80f5a5 Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (207 commits)
  [SCSI] gdth: fix CONFIG_ISA build failure
  [SCSI] esp_scsi: remove __dev{init,exit}
  [SCSI] gdth: !use_sg cleanup and use of scsi accessors
  [SCSI] gdth: Move members from SCp to gdth_cmndinfo, stage 2
  [SCSI] gdth: Setup proper per-command private data
  [SCSI] gdth: Remove gdth_ctr_tab[]
  [SCSI] gdth: switch to modern scsi host registration
  [SCSI] gdth: gdth_interrupt() gdth_get_status() & gdth_wait() fixes
  [SCSI] gdth: clean up host private data
  [SCSI] gdth: Remove virt hosts
  [SCSI] gdth: Reorder scsi_host_template intitializers
  [SCSI] gdth: kill gdth_{read,write}[bwl] wrappers
  [SCSI] gdth: Remove 2.4.x support, in-kernel changelog
  [SCSI] gdth: split out pci probing
  [SCSI] gdth: split out eisa probing
  [SCSI] gdth: split out isa probing
  gdth: Make one abuse of scsi_cmnd less obvious
  [SCSI] NCR5380: Use scsi_eh API for REQUEST_SENSE invocation
  [SCSI] usb storage: use scsi_eh API in REQUEST_SENSE execution
  [SCSI] scsi_error: Refactoring scsi_error to facilitate in synchronous REQUEST_SENSE
  ...
2007-10-15 08:19:33 -07:00
Linus Torvalds
ab9c232286 Merge branch 'upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev
* 'upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: (119 commits)
  [libata] struct pci_dev related cleanups
  libata: use ata_exec_internal() for PMP register access
  libata: implement ATA_PFLAG_RESETTING
  libata: add @timeout to ata_exec_internal[_sg]()
  ahci: fix notification handling
  ahci: clean up PORT_IRQ_BAD_PMP enabling
  ahci: kill leftover from enabling NCQ over PMP
  libata: wrap schedule_timeout_uninterruptible() in loop
  libata: skip suppress reporting if ATA_EHI_QUIET
  libata: clear ehi description after initial host report
  pata_jmicron: match vendor and class code only
  libata: add ST9160821AS / 3.ALD to NCQ blacklist
  pata_acpi: ACPI driver support
  libata-core: Expose gtm methods for driver use
  libata: add HDT722516DLA380 to NCQ blacklist
  libata: blacklist NCQ on Seagate Barracuda ST380817AS
  [libata] Turn on ACPI by default
  libata_scsi: Fix ATAPI transfer lengths
  libata: correct handling of SRST reset sequences
  libata: Integrate ACPI-based PATA/SATA hotplug - version 5
  ...
2007-10-12 16:16:41 -07:00
Kay Sievers
7eff2e7a8b Driver core: change add_uevent_var to use a struct
This changes the uevent buffer functions to use a struct instead of a
long list of parameters. It does no longer require the caller to do the
proper buffer termination and size accounting, which is currently wrong
in some places. It fixes a known bug where parts of the uevent
environment are overwritten because of wrong index calculations.

Many thanks to Mathieu Desnoyers for finding bugs and improving the
error handling.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12 14:51:01 -07:00
Dhaval Giani
c8e91b0a8f [SCSI] gdth: fix CONFIG_ISA build failure
drivers/scsi/gdth.c: In function ‘gdth_search_dev’:
drivers/scsi/gdth.c:646: warning: ‘pci_find_device’ is deprecated
(declared at include/linux/pci.h:482)
drivers/scsi/gdth.c: In function ‘gdth_init_isa’:
drivers/scsi/gdth.c:857: error: ‘gdth_irq_tab’ undeclared (first use in
this function)
drivers/scsi/gdth.c:857: error: (Each undeclared identifier is reported
only once
drivers/scsi/gdth.c:857: error: for each function it appears in.)
drivers/scsi/gdth.c: In function ‘gdth_copy_internal_data’:
drivers/scsi/gdth.c:2362: warning: unused variable ‘sg’

Looking into the code I notice that gdth_irq_tab is not declared with
CONFIG_ISA=y and !CONFIG_EISA.

The values seem to be same in 2.6.23 (I am not sure why it has been put
with #ifdefs in -mm) so I have just modified the #ifdef to take care of
CONFIG_ISA as well.

Signed-off-by: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:56:24 -04:00
Adrian Bunk
7624680824 [SCSI] esp_scsi: remove __dev{init,exit}
Since scsi_esp_{,un}register() are EXPORT_SYMBOL'ed, these functions
(and the functions they use) can't be __dev{init,exit}.

Based on a bug report by Rob Landley.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:56:19 -04:00
Boaz Harrosh
3892d88ae6 [SCSI] gdth: !use_sg cleanup and use of scsi accessors
gdth_execute() will issue an internal, none scsi-standard commands
onto __gdth_queuecommand(). Since it is not recommended to set
struct scsi_cmnd IO members in llds, gdth now uses internal IO
members for IO. In the case of gdth_execute() these members will be
set properly. In case the command was issued from scsi-ml
(by gdth_queuecommand) they will be set from scsi IO accessors.

  * define gdth IO accessors and use them throughout the driver.
  * use an sg-of-one in gdth_execute() and fix gdth_special_cmd()
    accordingly.
  * Clean the not use_sg code path and company

Signed-off-by Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:56:13 -04:00
Boaz Harrosh
f842b64e0f [SCSI] gdth: Move members from SCp to gdth_cmndinfo, stage 2
- Cleanup the rest of the scsi_cmnd->SCp members and move them
    to gdth_cmndinfo:
    SCp.this_residual 	 => priority
    SCp.buffers_residual => timeout
    SCp.Status 		 => status and dma_dir
    SCp.Message 	 => info
    SCp.have_data_in 	 => volatile wait_for_completion
    SCp.sent_command 	 => OpCode
    SCp.phase 		 => phase

  - Two more members will be naturally removed in the !use_sg cleanup

  TODO: What is the meaning of gdth_cmndinfo.phase? (rhetorically)

Signed-off-by Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:56:09 -04:00
Boaz Harrosh
3058d5de47 [SCSI] gdth: Setup proper per-command private data
- scsi_cmnd and specifically ->SCp of, where heavily abused
    with internal meaning members and flags. So introduce a new
    struct gdth_cmndinfo, put it on ->host_scribble and define a
    gdth_cmnd_priv() accessor to retrieve it from a scsi_cmnd.

  - The structure now holds two members:
    internal_command - replaces the IS_GDTH_INTERNAL_CMD() croft.
    sense_paddr - which was a 64-bit spanning on 2 32-bit members of SCp.
    More overloaded members from SCp and scsi_cmnd will be moved in a later
    patch (For easy review).

  - Split up gdth_queuecommand to an additional internal_function. The later
    is the one called by gdth_execute(). This will be more evident later in
    the scsi accessors patch, but it also facilitates in the differentiation
    between internal_command and external. And the setup of gdth_cmndinfo of
    each command.

Signed-off-by Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:56:05 -04:00
Boaz Harrosh
884f7fba09 [SCSI] gdth: Remove gdth_ctr_tab[]
- Places like Initialization and Reset that Just loop on all devices can
    use the link list with the list_for_each_entry macro.
    But the io_ctrl from user mode now suffers performance-wise because
    code has to do a sequential search for the requested host number.
    I have isolated this search in a gdth_find_ha(int hanum) member
    for future enhancement if needed.

Signed-off-by Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:56:00 -04:00
Christoph Hellwig
835cc24aff [SCSI] gdth: switch to modern scsi host registration
- Use scsi_add_host and friends and track instances ourselves. And
    generally modernize the driver's structure.

  - TODO: Next we can remove the controller table
  - TODO: Fix use of deprecated pci_find_device()

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:55:55 -04:00
Boaz Harrosh
10e1b4bc92 [SCSI] gdth: gdth_interrupt() gdth_get_status() & gdth_wait() fixes
- gdth_get_status() returns a single device interrupt IStatus
  - gdth_interrupt split to __gdth_interrupt() that receives
    flags if is called from gdth_wait().
  - Use dev_id passed from kernel and do not loop on all
    controllers.
  - gdth_wait(), get read of all global variables and call the new
    __gdth_interrupt with these variables on the stack

Signed-off-by Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:55:51 -04:00
Boaz Harrosh
45f1a41b2b [SCSI] gdth: clean up host private data
- Based on same patch from Christoph Hellwig <hch@lst.de>

  - Get rid of all the indirection in the Scsi_Host private data and always
    put the gdth_ha_str directly into it.

  - Change all internal functions prototype to recieve an "gdth_ha_str *ha"
    pointer directlly and kill all that redundent access to the "gdth_ctr_tab[]"
    controller-table.

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:55:46 -04:00
Christoph Hellwig
52759e6abc [SCSI] gdth: Remove virt hosts
The virt_ctr option allows to register a new scsi_host for each bus
on the raid controller.  This non-default option makes no sense with
the current scsi code and prevents cleaning up the host registration,
so remove it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:55:42 -04:00
Jeff Garzik
69916b7cea [SCSI] gdth: Reorder scsi_host_template intitializers
shuffle scsi_host_template members such that they appear in the
order in which they are defined in the header.  this makes is easier
to verify when initializers are missing members.

Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:55:38 -04:00
Jeff Garzik
ac8869d56d [libata] Remove ->port_disable() hook
It was always set to ata_port_disable().  Removed the hook, and replaced
the very few ap->ops->port_disable() callsites with direct calls to
ata_port_disable().

Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12 14:55:35 -04:00
Jeff Garzik
a52667f3cd [SCSI] gdth: kill gdth_{read,write}[bwl] wrappers
They are direct equivalents to {read,write}[bwl].

Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:55:33 -04:00
Tejun Heo
cc0680a580 libata-link: linkify reset
Make reset methods and related functions deal with ata_link instead of
ata_port.

* ata_do_reset()
* ata_eh_reset()
* all prereset/reset/postreset methods and related functions

This patch introduces no behavior change.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12 14:55:31 -04:00
Tejun Heo
9af5c9c97d libata-link: introduce ata_link
Introduce ata_link.  It abstracts PHY and sits between ata_port and
ata_device.  This new level of abstraction is necessary to support
SATA Port Multiplier, which basically adds a bunch of links (PHYs) to
a ATA host port.  Fields related to command execution, spd_limit and
EH are per-link and thus moved to ata_link.

This patch only defines the host link.  Multiple link handling will be
added later.  Also, a lot of ap->link derefences are added but many of
them will be removed as each part is converted to deal directly with
ata_link instead of ata_port.

This patch introduces no behavior change.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: James Bottomley <James.Bottomley@SteelEye.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12 14:55:30 -04:00
Jeff Garzik
8d7a5da4fc [SCSI] gdth: Remove 2.4.x support, in-kernel changelog
* Remove in-source changelog.  It's archived permanently in git and
    various kernel archives, and changelogs should exist purely in git.

  * Remove 2.4.x kernel support.  It is an active obstacle to
    modernizing this driver, at this point.  This includes killing
    gdth_kcompat.h which is 100% redundant in modern kernels.

Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:55:29 -04:00
Christoph Hellwig
8514ef27ee [SCSI] gdth: split out pci probing
Split out per-device pci probing and put it under proper CONFIG_PCI.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:55:24 -04:00
Christoph Hellwig
706a5d4567 [SCSI] gdth: split out eisa probing
Split eisa probing into it's own helper, and do proper error unwinding.
Protect EISA probind by the proper CONFIG_EISA symbol.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:55:20 -04:00
Christoph Hellwig
aed91cb520 [SCSI] gdth: split out isa probing
(note: this is ontop of Jeff's pci cleanup patch)

Split out isa probing into a helper of it's own.  Error handling is
cleaned up, but errors are not propagated yet.  Also enclose the isa
probe under the proper CONFIG_ISA symbol instead of the !IA64 hack.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:55:16 -04:00
Matthew Wilcox
b8bff2aeaf gdth: Make one abuse of scsi_cmnd less obvious
Rather than having internal commands abuse scsi_done to call
  gdth_scsi_done, have all the places that use to call scsi_done directly
  call gdth_scsi_done, which now checks whether the command was internal,
  and calls scsi_done if not.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:55:11 -04:00
Boaz Harrosh
28424d3a50 [SCSI] NCR5380: Use scsi_eh API for REQUEST_SENSE invocation
- Use new scsi_eh_prep/restor_cmnd() for synchronous
    REQUEST_SENSE invocation.

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:55:07 -04:00
Boaz Harrosh
e1c234685c [SCSI] scsi_error: Refactoring scsi_error to facilitate in synchronous REQUEST_SENSE
- Drivers/transports that want to send a synchronous REQUEST_SENSE command
   as part of their .queuecommand sequence, have 2 new API's that facilitate
   in doing so and abstract them from scsi-ml internals.

   void scsi_eh_prep_cmnd(struct scsi_cmnd *scmd,
	struct scsi_eh_save *sesci, unsigned char *cmnd,
	int cmnd_size, int sense_bytes)

   Will hijack a command and prepare it for request sense if needed.
   And will save any later needed info into a scsi_eh_save structure.

   void scsi_eh_restore_cmnd(struct scsi_cmnd* scmd,
	struct scsi_eh_save *sesci);

   Will undo any changes done to a command by above function. Making
   it ready for completion.

 - Re-factor scsi_send_eh_cmnd() to use above APIs

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:54:58 -04:00
Boaz Harrosh
55db6c1b8e [SCSI] scsi_error: code cleanup before refactoring of scsi_send_eh_cmnd()
- regrouped variables for easier reviewing of next patch
  - Support of cmnd==NULL in call to scsi_send_eh_cmnd()
  - In the @sense_bytes case set transfer size to the minimum
    size of sense_buffer and passed @sense_bytes. cmnd[4] is
    set accordingly.
  - REQUEST_SENSE is set into cmnd[0] so if @sense_bytes is
    not Zero passed @cmnd should be NULL.
  - Also save/restore resid of failed command.
  - Adjust caller

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:54:51 -04:00
Gabriel C
2ca482302f [SCSI] fdomain: fix CONFIG_PCI=n warnings
I get this warnings on current git when CONFIG_PCI is not set :

drivers/scsi/fdomain.c:390: warning: 'PCI_dev' defined but not used
drivers/scsi/fdomain.c:1768: warning: 'fdomain_pci_tbl' defined but not used

Signed-off-by: Gabriel Craciunescu <nix.or.die@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:54:47 -04:00
Joe Korty
89932697ce [SCSI] dpt_i2o: Fix section mismatch
Fix section mismatch in the Adaptec DPT SCSI Raid driver.

WARNING: vmlinux.o(.init.text+0x1fcd2): Section mismatch:
	reference to .exit.text:adpt_exit (between 'adpt_init' and 'ahc_linux_init')

This warning is due to adaptec device detection calling the exit routine on
failure to properly register the adaptec device.

The exit routine + call was added on July 30 by

	Commit: 55d9fcf57b
	Author: Matthew Wilcox
	Subject: [SCSI] dpt_i2o: convert to SCSI hotplug model.

Mathew: isn't a module exit routine a little too strong to be calling on the
failure of a single device?  Module exit implies that other, non-failing
adaptec raid devices will also get shut down.

Signed-off-by: Joe Korty <joe.korty@ccur.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:54:42 -04:00
Adrian Bunk
f01f9d5943 [SCSI] imm: fix check-after-use
The Coverity checker spotted that we have already oops'ed if "cmd"
was NULL.

Since "cmd" being NULL doesn't seem to be possible at this point this
patch removes the NULL check.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:54:33 -04:00
Andrew Morton
5975f643ef [SCSI] arcmsr: build fix
drivers/scsi/arcmsr/arcmsr_hba.c:129: error: 'arcmsr_pci_error_detected' undeclared here (not in a function)
drivers/scsi/arcmsr/arcmsr_hba.c:130: error: 'arcmsr_pci_slot_reset' undeclared here (not in a function)

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:54:29 -04:00
Adrian Bunk
774251ef64 [SCSI] nsp_cs: remove kernel 2.4 code
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:54:24 -04:00
Robert P. J. Day
a02676d4bd [SCSI] ibmmca: Remove dead references to MODULE_PARM macro
Remove the useless references to the obsolete MODULE_PARM macro.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:54:17 -04:00
Matthew Wilcox
9d511a4b29 [SCSI] advansys: Changes to work on parisc
Change PortAddr to be an unsigned int instead of an unsigned short (IO
Port address are 24 bit on parisc).  Fix a couple of printk argument
warnings.  Remove the Kconfig marking as 'BROKEN'.

I haven't removed the #warning yet because virt_to_bus/bus_to_virt are
only eliminated for narrow boards.  Wide boards need more work.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:54:13 -04:00
Matthew Wilcox
d10fb2c7b5 [SCSI] advansys: Use dma mapping for overrun buffer
Convert the call to virt_to_bus() into a call to dma_map_single().  Some
architectures may require different DMA addresses for different devices,
so allocate one overrun buffer per host rather than one for all cards.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:54:05 -04:00
Matthew Wilcox
b249c7fda2 [SCSI] advansys: Remove a couple of uses of bus_to_virt
Replace ASC_VADDR_TO_U32 and ASC_U32_TO_VADDR with an auto-expanding
array that maps pointers to 32-bit IDs and back.  One of the uses of
ASC_VADDR_TO_U32 was in error; it should have been using ADV_VADDR_TO_U32.

Also replace the use of virt_to_bus when setting the sense_address with
a call to dma_map_single() followed by dma_cache_sync.  This part cribbed
from the 53c700 driver.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:54:00 -04:00
Matthew Wilcox
52c334e945 [SCSI] advansys: convert to use the data buffer accessors
- remove the unnecessary map_single path.
- convert to use the new accessors for the sg lists and the parameters.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>

- convert the statistics to not distinguish between single and sg xfers
- replace ASC_CEILING with DIV_ROUND_UP
- remove an obsolete comment

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:53:56 -04:00
Matthew Wilcox
fd625f4705 [SCSI] advansys: Remove DvcGetPhyAddr
This rather complex function boiled down to calling virt_to_bus().
Also get rid of some obsolete defines and variables that could never vary.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:53:52 -04:00
Matthew Wilcox
98d41c29a4 [SCSI] advansys: Move a couple of fields from struct board to struct adv_dvc
board->carrp is a duplicate of asc_dvc->carrier_buf, so cut out the
middle-man and assign directly to carrier_buf.  Move orig_reqp to adv_dvc
too, since it's wide-board specific.  Also eliminate an unnecessary BUG_ON
(we'll never get there with a NULL carrier_buf, and will crash if we do).
The bulk of this patch is rearranging structures so everything's declared
in the right order.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:53:48 -04:00
Matthew Wilcox
afbb68c35f [SCSI] advansys: Make sdtr_period_tbl a pointer
It's somewhat neater to make this a pointer to one of two tables
than initialising an array in the driver.  Also delete the unused
AscSynIndexToPeriod and rename host_init_sdtr_index to min_sdtr_index

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:53:45 -04:00
Matthew Wilcox
9d0e96eba1 [SCSI] advansys: Get rid of board index number
It's always a mistake to have your own index of boards; just use the
scsi host number.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:53:41 -04:00
Matthew Wilcox
f092d2290f [SCSI] advansys: Remove private lock
The board lock was essentially identical with the host lock.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:53:37 -04:00
Matthew Wilcox
b352f92376 [SCSI] advansys: Sort out debug macros
Replace ASC_DBG{,1,2,3,4,5} with a single variadic macro ASC_DBG.  As
suggested by Jeff Garzik, include DRV_NAME and __FUNCTION__ in the output.
Change all callers to no longer include the function name in the string.

Enabling ADVANSYS_DEBUG to test this feature shows a lot of other problems
that need to be fixed:
 - Reorder asc_prt_* functions now that their prototypes have been removed.
 - There is no longer a struct device in ASC_DVC_CFG/ADV_DVC_CFG, and it
   wasn't necessarily a PCI device to begin with.  Print the bus_id from
   asc_board->dev instead.
 - isr_callback no longer exists.
 - ASC_DBG_PRT_SCSI_CMND isn't being used, so delete asc_prt_scsi_cmnd
   too.
 - A missing semicolon

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:53:34 -04:00
Matthew Wilcox
b08fc56550 [SCSI] advansys: Remove library version & serial numbers
With the ASC and ADV libraries merged into the driver, there really is
no point in reporting their version numbers, or even trying to maintain
them.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:53:29 -04:00
Matthew Wilcox
d241149558 [SCSI] advansys: Remove asc_board_t typedef and ASC_BOARDP macro
asc_board_t was simply a typedef for struct asc_board.  ASC_BOARDP()
can be replaced by shost_priv() except in the ASC_STATS* macros which
rely on the cast; add an explicit cast there.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:53:26 -04:00
Matthew Wilcox
720349a879 [SCSI] advansys: Merge ASC_IERR definitions
There were two blocks of ASC_IERR definitions; one for narrow and one for
wide boards.  Some of the same names were used (with the same values),
and some of the same values were used with different names.  This could
only lead to confusion, so I unified them in one block of definitions
with no overlapping values.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:53:22 -04:00
Matthew Wilcox
d361db4832 [SCSI] advansys: Sort out irq number mess
The interrupt number was being stored in 4-5 different places, each with
its own type, rules and usage.  Fix this by keeping an unsigned int in
the struct asc_board, and filling it in from the bus probe functions
(since it's different for each of the four bus types).  In order to do
this, we have to allocate the Scsi_Host in the bus probe functions too.
Then we can return an error from advansys_board_found, which requires
a little rearranging of code (and removing of the err_code variable).
Move the Wide Board flag setting into the PCI bus probe function.

Split the AscGetChipIRQ function into three functions (one for each bus
type that needs it) and add some commentary to explain what's going on.
Also get rid of the AscSetChipIRQ function as we only ever set the
interrupt number to the same value it already had.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:53:18 -04:00
Matthew Wilcox
9a256fa50e [SCSI] advansys: Remove ASC_WIDE_BOARD predicate
Replace it with !ASC_NARROW_BOARD

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:53:14 -04:00
Matthew Wilcox
ae002fec69 [SCSI] advansys: Remove ASC_SELECT_QUEUE_DEPTHS
It was only ever set; never tested, nor cleared.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:53:11 -04:00
Matthew Wilcox
52fa077709 [SCSI] advansys: Improve reset handler
- Don't need to set ASC_HOST_IN_RESET any more
 - Don't need to test scp->device->host for NULL -- if it's NULL, we
   couldn't've been called.
 - Use scmd_printk instead of ASC_PRINT

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:53:06 -04:00
Matthew Wilcox
05848b6e66 [SCSI] advansys: Fix simultaneous calls to ->queuecommand
The narrow board used two global structures to set up a command;
unfortunately they weren't locked, so with two boards in the machine,
one call to queuecommand could corrupt the data being used by the other
call to queuecommand.

Fix this by allocating asc_scsi_q on the stack (64 bytes) and using kmalloc
for the asc_sg_head (2k)

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:53:02 -04:00
Matthew Wilcox
41d2493d34 [SCSI] advansys: Restructure asc_execute_scsi_cmnd()
The wide and narrow boards share identical handling of the return value,
except for some trivial error messages.  Move the handling to the common
end of the function.  Also move variable declarations to the arms of
the `if' that they're used in and delete some pointless comments.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:52:59 -04:00
Matthew Wilcox
6e8905f4a0 [SCSI] advansys: Remove array of scsi targets
The driver was saving a scsi_device for each target, but wasn't doing
anything useful with them.  Just delete the array.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:52:55 -04:00
Matthew Wilcox
512193588d [SCSI] advansys: Eliminate prototypes
Rearrange a lot of the functions in the file to get rid of all the forward
declarations.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:52:49 -04:00
Matthew Wilcox
6f5391c283 [SCSI] Get rid of scsi_cmnd->done
The ULD ->done callback moves into the scsi_driver.  By moving the call
to scsi_io_completion() from scsi_blk_pc_done() to scsi_finish_command(),
we can eliminate the latter entirely.  By returning 'good_bytes' from
the ->done callback (rather than invoking scsi_io_completion()), we can
stop exporting scsi_io_completion().

Also move the prototypes from sd.h to sd.c as they're all internal anyway.
Rename sd_rw_intr to sd_done and rw_intr to sr_done.

Inspired-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:52:46 -04:00
Matthew Wilcox
687d2bc487 [SCSI] gdth: Stop abusing ->done for internal commands
The ->done member was being used to mark commands as being internal.
I decided to put a magic number in ->underflow instead.  I believe this
to be safe as no current user of ->underflow has any of the bottom 9
bits set.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:52:41 -04:00
Matthew Wilcox
9ec76fbf7d [SCSI] qlogicpti: Add a slave_configure method
By configuring targets in slave_configure, we can eliminate a shadow
queuecommand, a shadow scsi_done, a write to the host template, abuse of
SCp->Message and SCp->Status, a use of kmap_atomic() and sniffing the
results of INQUIRY.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:52:38 -04:00
Jeff Garzik
8bd4578e10 [SCSI] aic94xx: fix SSP IU status print-out
The SSP response DPRINTK in asd_get_response_tasklet() was printing
a hardcoded status result, rather than the status from the SSP
response IU.

Arguably, this should not be a DPRINTK either, since the admin might
want to know about this.

Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:52:30 -04:00
Matthew Wilcox
cce99c6925 [SCSI] Fix mistaken uses of ->done
All these drivers meant to call ->scsi_done() but got confused.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:52:04 -04:00
Matthew Wilcox
1d0c7c8dcf [SCSI] pluto: Don't abuse ->done for internal commands
We can simply call the internal done function directly

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:52:00 -04:00
James Bottomley
311b581e1d [SCSI] Fix device not ready printk
Because scsi_print_sense_hdr prefixes with KERN_INFO, the output from
scsi_io_completion looks like:

sd 0:0:0:0: [sdb] Device not ready: <6>: Sense Key : 0x2 [current]
: ASC=0x4 ASCQ=0x3

By using scsi_show_sense_hdr, we can get the much more appealing output:

sd 0:0:0:0: [sdb] Device not ready: Sense Key : 0x2 [current]
sd 0:0:0:0: [sdb] Device not ready: ASC=0x4 ASCQ=0x3

Acked-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:51:56 -04:00
Matthew Wilcox
12a441622b [SCSI] Remove ->pid field from scsi_cmnd
The pid field is a duplicate of the serial_number field and has been
scheduled for removal for a long time.  A few drivers were still using
it, so just change them to use serial_number instead.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:51:52 -04:00
Kay Sievers
13ba9bcbfd [SCSI] fix scsi_is_sdev_device() after switch to default sdev attributes
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:51:48 -04:00
Bernhard Walle
8c8fdc5910 [SCSI] ips: Update version information
This patch just makes the version number in ips.c and ips.h consistent. It
seems that this has been forgotten in a60768e2d4.

It also removes code duplication, each number is now only once in the code to
avoid similar errors in the future.

Signed-off-by: Bernhard Walle <bwalle@suse.de>
Acked-by: Mark Salyzyn <aacraid@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:51:44 -04:00
Matthew Wilcox
a50ee7a728 [SCSI] ips: Close narrow race in release
We were releasing the IRQ before removing the host, so commands could
still be coming in which would never be seen by the interrupt handler.
Just remove the host before releasing the IRQ to close this race.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:51:40 -04:00
Matthew Wilcox
f01abb362f [SCSI] aic94xx: Free scsi host on error
If an error occurred during initialisation, we would sometimes fail to
call scsi_host_put() and thus end up with a leaked scsi_host.  It was
also possible to miss calling scsi_remove_host().

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:51:33 -04:00
Matthew Wilcox
c131993b4c [SCSI] qlogicfas: Close narrow race in release
We were releasing the IRQ before removing the host, so commands could
still be coming in which would never be seen by the interrupt handler.
Just remove the host before releasing the IRQ to close this race.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:51:26 -04:00
Matthew Wilcox
1bd4057346 [SCSI] aha152x: Close narrow race in release
We were releasing the IRQ before removing the host, so commands could
still be coming in which would never be seen by the interrupt handler.
Just remove the host before releasing the IRQ to close this race.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:51:22 -04:00
Matthew Wilcox
dffe807cdb [SCSI] ncr53c8xx: Call scsi_host_put in release
Since ncr53c8xx_attach() calls scsi_host_put(), make ncr53c8xx_release()
call scsi_host_put() too, for symmetry.  Both callers already expect
it to put the host for them, so that works out nicely.  While the zalon
driver does 'use' the host pointer afterwards, it only compares it for
equality and doesn't dereference it, so that's safe.

While I'm at it, get rid of pointless checks for NULL, use shost_priv()
and change ncr53c8xx_release to return void.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:51:18 -04:00
Matthew Wilcox
6fdea8dbbe [SCSI] ide-scsi: Close narrow race in release
We were releasing the block devices before removing the host, so commands
could still be coming in which would cause a panic.  Just remove the
host before releasing the block devices to close this race.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:51:14 -04:00
Matthew Wilcox
34f8f0d294 [SCSI] ibmmca: Stop leaking scsi_hosts on exit
There was a missing call to scsi_host_put() causing us to leak a scsi
host every time this module was unloaded.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:51:10 -04:00
Matthew Wilcox
a57b1fccdf [SCSI] scsi_scan: Cope with kthread_run failing
If kthread_run failed, we would fail to scan the host, and leak the
allocated async_scan_data.  Since using a separate thread is just an
optimisation, do the scan synchronously if we fail to spawn a thread.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:51:06 -04:00
Matthew Wilcox
31765d7d3d [SCSI] Improve error message when offlining a device
The current code prints:

scsi 13:0:4:0: scsi: Device offlined - not ready after error recovery

which is repetitively redundant.  This patch changes that message to:

scsi 6:0:6:0: Device offlined - not ready after error recovery

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:51:03 -04:00
James Bottomley
7c07d613d2 [SCSI] sg: use idr to replace static arrays
sg uses a scheme to reallocate a single contiguous array of all its
pointers for lookup and management.  This didn't matter too much when sg
could only attach 256 nodes, but now the maximum has been bumped up to
32k we're starting to push the limits of the maximum allocatable
contiguous memory.  The solution to this is to eliminate the static
array and do everything via idr, which this patch does.

Acked-by: Douglas Gilbert <dougg@torque.net>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:50:59 -04:00
Matthias Kaehlcke
4390e60163 [SCSI] osst: Use mutex instead of semaphore
The OnStream SCSI Tape driver uses a semaphore as mutex.  Use the mutex API
instead of the (binary) semaphore.

Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com>
Reviewed-by: Satyam Sharma <satyam@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Willem Riede <wrlk@riede.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:50:55 -04:00
Jeff Garzik
488a5c8a9a [SCSI] arcmsr: irq handler fixes, cleanups, micro-opts
* Remove IRQF_DISABLED, it is clearly wrong for this driver.

* Remove wasteful spin_lock_irqsave() in interrupt handler.
  The lighter-weight spin_lock() is all that's needed.

* Annotate with FIXME where arcmsr_interrupt() is called
  without any spinlock being acquired.

* Eliminate pointless cast from void pointer in arcmsr_do_interrupt()

[jejb: conflict resolution]

Signed-off-by: Jeff Garzik <jeff@garzik.org>
Acked-by: Nick Cheng <nick.cheng@areca.com.tw>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:50:51 -04:00
Jeff Garzik
24430458bb [SCSI] arcmsr: Fix hardware wait loops
Remove _interruptible, since receiving a signal while waiting on a
hardware condition will simply cause the driver to busy-wait.

Using msleep_interruptible() is rarely the right thing to do, when
waiting on a hardware condition to change.

Also, replace msleep with ssleep while doing this, where appropriate.

[jejb: fix up merge conflict]

Signed-off-by: Jeff Garzik <jeff@garzik.org>
Acked-by: Nick Cheng <nick.cheng@areca.com.tw>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:50:48 -04:00
Andrew Vasquez
095862ab98 [SCSI] qla2xxx: Update version number to 8.02.00-k4.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:50:44 -04:00
Andrew Vasquez
39bd962269 [SCSI] qla2xxx: Limit iIDMA speed adjustments.
Do not adjust the iIDMA speed on ports which have a faster
link-speed than the HBA itself.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:50:40 -04:00
Andrew Vasquez
87f27015b8 [SCSI] qla2xxx: Rework MSI-X handlers.
Since MSI-X vectors do not require a clearing "handshake" from
the system perspective, and the registered handler will not be
called more than once for one occurrence of receipt of a vector,
there is no requirement to flush the risc register write clearing
the interrupt condition in the risc. Also, since the msi-x
registered handlers are optimised for a particular vector, it is
preferable to handle the one vector received per invocation of
the handler.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:50:37 -04:00
Andrew Vasquez
8b3253d10f [SCSI] qla2xxx: Clear options-flags while staging firmware-execution.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:50:33 -04:00
Andrew Vasquez
26ff776d1d [SCSI] qla2xxx: Sparse cleanups in qla_mid.c
Make several needlessly global functions static:
- qla2x00_mark_vp_devices_dead()
- qla24xx_configure_vp()

Remove unused function qla24xx_modify_vport().

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:50:29 -04:00
Andrew Vasquez
700ca0e701 [SCSI] qla2xxx: Cleanup several 'sparse' warnings.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:50:26 -04:00
Andrew Vasquez
f363b9434a [SCSI] qla2xxx: Use shost_priv().
Drop usage of legacy to_qla_host() macro.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:50:22 -04:00
Andrew Vasquez
e745759a0f [SCSI] qla2xxx: Remove unused member (list) from srb_t structure.
This change reduces by as much as 16% the memory footprint for
each allocated sbr_t structure requested from the mempool.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:50:17 -04:00
Seokmann Ju
4d0ea24769 [SCSI] qla2xxx: Retrieve max-NPIV support capabilities from FW.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:50:14 -04:00
Andrew Vasquez
c45bcc8e77 [SCSI] qla2xxx: Use the correct pointer-address during NVRAM writes.
Original code, incorrectly passed the address-of a pointer rather
than the pointer value itself.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:50:10 -04:00
Andrew Vasquez
8a85e17152 [SCSI] qla2xxx: Set correct attribute count during FDMI RPA.
Also remove legacy '/proc' name during OS_DEVICE_NAME
registration.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:50:06 -04:00
Ravi Anand
63a8651f25 [SCSI] qla2xxx: Correct infinite-login-retry issue.
Where the DPC logic would get jammed into continuously
reloging-into a port.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:50:02 -04:00